2 * linux/arch/arm/mm/proc-feroceon.S: MMU functions for Feroceon
4 * Heavily based on proc-arm926.S
5 * Maintainer: Assaf Hoffman <hoffman@marvell.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 #include <linux/linkage.h>
23 #include <linux/init.h>
24 #include <asm/assembler.h>
25 #include <asm/hwcap.h>
26 #include <asm/pgtable-hwdef.h>
27 #include <asm/pgtable.h>
29 #include <asm/ptrace.h>
30 #include "proc-macros.S"
33 * This is the maximum size of an area which will be invalidated
34 * using the single invalidate entry instructions. Anything larger
35 * than this, and we go for the whole cache.
37 * This value should be chosen such that we choose the cheapest
40 #define CACHE_DLIMIT 16384
43 * the cache line size of the I and D cache
45 #define CACHE_DLINESIZE 32
54 .word __cache_params_loc
57 * cpu_feroceon_proc_init()
59 ENTRY(cpu_feroceon_proc_init)
60 mrc p15, 0, r0, c0, c0, 1 @ read cache type register
61 ldr r1, __cache_params
63 tst r0, #(1 << 16) @ get way
64 mov r0, r0, lsr #18 @ get cache size order
65 movne r3, #((4 - 1) << 30) @ 4-way
68 mov r2, r2, lsl r0 @ actual cache size
69 movne r2, r2, lsr #2 @ turned into # of sets
75 * cpu_feroceon_proc_fin()
77 ENTRY(cpu_feroceon_proc_fin)
78 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
79 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
81 mcr p15, 1, r0, c15, c9, 0 @ clean L2
82 mcr p15, 0, r0, c7, c10, 4 @ drain WB
85 mrc p15, 0, r0, c1, c0, 0 @ ctrl register
86 bic r0, r0, #0x1000 @ ...i............
87 bic r0, r0, #0x000e @ ............wca.
88 mcr p15, 0, r0, c1, c0, 0 @ disable caches
92 * cpu_feroceon_reset(loc)
94 * Perform a soft reset of the system. Put the CPU into the
95 * same state as it would be if it had been reset, and branch
96 * to what would be the reset vector.
98 * loc: location to jump to for soft reset
101 ENTRY(cpu_feroceon_reset)
103 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
104 mcr p15, 0, ip, c7, c10, 4 @ drain WB
106 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
108 mrc p15, 0, ip, c1, c0, 0 @ ctrl register
109 bic ip, ip, #0x000f @ ............wcam
110 bic ip, ip, #0x1100 @ ...i...s........
111 mcr p15, 0, ip, c1, c0, 0 @ ctrl register
115 * cpu_feroceon_do_idle()
117 * Called with IRQs disabled
120 ENTRY(cpu_feroceon_do_idle)
122 mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
123 mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
129 * Unconditionally clean and invalidate the entire icache.
131 ENTRY(feroceon_flush_icache_all)
133 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
135 ENDPROC(feroceon_flush_icache_all)
138 * flush_user_cache_all()
140 * Clean and invalidate all cache entries in a particular
144 ENTRY(feroceon_flush_user_cache_all)
148 * flush_kern_cache_all()
150 * Clean and invalidate the entire cache.
152 ENTRY(feroceon_flush_kern_cache_all)
156 ldr r1, __cache_params
159 2: mcr p15, 0, ip, c7, c14, 2 @ clean + invalidate D set/way
160 subs ip, ip, #(1 << 30) @ next way
162 subs r1, r1, #(1 << 5) @ next set
167 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
168 mcrne p15, 0, ip, c7, c10, 4 @ drain WB
172 * flush_user_cache_range(start, end, flags)
174 * Clean and invalidate a range of cache entries in the
175 * specified address range.
177 * - start - start address (inclusive)
178 * - end - end address (exclusive)
179 * - flags - vm_flags describing address space
182 ENTRY(feroceon_flush_user_cache_range)
183 sub r3, r1, r0 @ calculate total size
184 cmp r3, #CACHE_DLIMIT
185 bgt __flush_whole_cache
187 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
188 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
189 add r0, r0, #CACHE_DLINESIZE
190 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
191 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
192 add r0, r0, #CACHE_DLINESIZE
197 mcrne p15, 0, ip, c7, c10, 4 @ drain WB
201 * coherent_kern_range(start, end)
203 * Ensure coherency between the Icache and the Dcache in the
204 * region described by start, end. If you have non-snooping
205 * Harvard caches, you need to implement this function.
207 * - start - virtual start address
208 * - end - virtual end address
211 ENTRY(feroceon_coherent_kern_range)
215 * coherent_user_range(start, end)
217 * Ensure coherency between the Icache and the Dcache in the
218 * region described by start, end. If you have non-snooping
219 * Harvard caches, you need to implement this function.
221 * - start - virtual start address
222 * - end - virtual end address
224 ENTRY(feroceon_coherent_user_range)
225 bic r0, r0, #CACHE_DLINESIZE - 1
226 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
227 mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
228 add r0, r0, #CACHE_DLINESIZE
231 mcr p15, 0, r0, c7, c10, 4 @ drain WB
235 * flush_kern_dcache_area(void *addr, size_t size)
237 * Ensure no D cache aliasing occurs, either with itself or
240 * - addr - kernel address
241 * - size - region size
244 ENTRY(feroceon_flush_kern_dcache_area)
246 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
247 add r0, r0, #CACHE_DLINESIZE
251 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
252 mcr p15, 0, r0, c7, c10, 4 @ drain WB
256 ENTRY(feroceon_range_flush_kern_dcache_area)
258 add r1, r0, #PAGE_SZ - CACHE_DLINESIZE @ top addr is inclusive
259 orr r3, r2, #PSR_I_BIT
260 msr cpsr_c, r3 @ disable interrupts
261 mcr p15, 5, r0, c15, c15, 0 @ D clean/inv range start
262 mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top
263 msr cpsr_c, r2 @ restore interrupts
265 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
266 mcr p15, 0, r0, c7, c10, 4 @ drain WB
270 * dma_inv_range(start, end)
272 * Invalidate (discard) the specified virtual address range.
273 * May not write back any entries. If 'start' or 'end'
274 * are not cache line aligned, those lines must be written
277 * - start - virtual start address
278 * - end - virtual end address
283 feroceon_dma_inv_range:
284 tst r0, #CACHE_DLINESIZE - 1
285 bic r0, r0, #CACHE_DLINESIZE - 1
286 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
287 tst r1, #CACHE_DLINESIZE - 1
288 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
289 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
290 add r0, r0, #CACHE_DLINESIZE
293 mcr p15, 0, r0, c7, c10, 4 @ drain WB
297 feroceon_range_dma_inv_range:
299 tst r0, #CACHE_DLINESIZE - 1
300 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
301 tst r1, #CACHE_DLINESIZE - 1
302 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
304 subne r1, r1, #1 @ top address is inclusive
305 orr r3, r2, #PSR_I_BIT
306 msr cpsr_c, r3 @ disable interrupts
307 mcr p15, 5, r0, c15, c14, 0 @ D inv range start
308 mcr p15, 5, r1, c15, c14, 1 @ D inv range top
309 msr cpsr_c, r2 @ restore interrupts
313 * dma_clean_range(start, end)
315 * Clean the specified virtual address range.
317 * - start - virtual start address
318 * - end - virtual end address
323 feroceon_dma_clean_range:
324 bic r0, r0, #CACHE_DLINESIZE - 1
325 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
326 add r0, r0, #CACHE_DLINESIZE
329 mcr p15, 0, r0, c7, c10, 4 @ drain WB
333 feroceon_range_dma_clean_range:
336 subne r1, r1, #1 @ top address is inclusive
337 orr r3, r2, #PSR_I_BIT
338 msr cpsr_c, r3 @ disable interrupts
339 mcr p15, 5, r0, c15, c13, 0 @ D clean range start
340 mcr p15, 5, r1, c15, c13, 1 @ D clean range top
341 msr cpsr_c, r2 @ restore interrupts
342 mcr p15, 0, r0, c7, c10, 4 @ drain WB
346 * dma_flush_range(start, end)
348 * Clean and invalidate the specified virtual address range.
350 * - start - virtual start address
351 * - end - virtual end address
354 ENTRY(feroceon_dma_flush_range)
355 bic r0, r0, #CACHE_DLINESIZE - 1
356 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
357 add r0, r0, #CACHE_DLINESIZE
360 mcr p15, 0, r0, c7, c10, 4 @ drain WB
364 ENTRY(feroceon_range_dma_flush_range)
367 subne r1, r1, #1 @ top address is inclusive
368 orr r3, r2, #PSR_I_BIT
369 msr cpsr_c, r3 @ disable interrupts
370 mcr p15, 5, r0, c15, c15, 0 @ D clean/inv range start
371 mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top
372 msr cpsr_c, r2 @ restore interrupts
373 mcr p15, 0, r0, c7, c10, 4 @ drain WB
377 * dma_map_area(start, size, dir)
378 * - start - kernel virtual start address
379 * - size - size of region
380 * - dir - DMA direction
382 ENTRY(feroceon_dma_map_area)
384 cmp r2, #DMA_TO_DEVICE
385 beq feroceon_dma_clean_range
386 bcs feroceon_dma_inv_range
387 b feroceon_dma_flush_range
388 ENDPROC(feroceon_dma_map_area)
391 * dma_map_area(start, size, dir)
392 * - start - kernel virtual start address
393 * - size - size of region
394 * - dir - DMA direction
396 ENTRY(feroceon_range_dma_map_area)
398 cmp r2, #DMA_TO_DEVICE
399 beq feroceon_range_dma_clean_range
400 bcs feroceon_range_dma_inv_range
401 b feroceon_range_dma_flush_range
402 ENDPROC(feroceon_range_dma_map_area)
405 * dma_unmap_area(start, size, dir)
406 * - start - kernel virtual start address
407 * - size - size of region
408 * - dir - DMA direction
410 ENTRY(feroceon_dma_unmap_area)
412 ENDPROC(feroceon_dma_unmap_area)
414 ENTRY(feroceon_cache_fns)
415 .long feroceon_flush_icache_all
416 .long feroceon_flush_kern_cache_all
417 .long feroceon_flush_user_cache_all
418 .long feroceon_flush_user_cache_range
419 .long feroceon_coherent_kern_range
420 .long feroceon_coherent_user_range
421 .long feroceon_flush_kern_dcache_area
422 .long feroceon_dma_map_area
423 .long feroceon_dma_unmap_area
424 .long feroceon_dma_flush_range
426 ENTRY(feroceon_range_cache_fns)
427 .long feroceon_flush_icache_all
428 .long feroceon_flush_kern_cache_all
429 .long feroceon_flush_user_cache_all
430 .long feroceon_flush_user_cache_range
431 .long feroceon_coherent_kern_range
432 .long feroceon_coherent_user_range
433 .long feroceon_range_flush_kern_dcache_area
434 .long feroceon_range_dma_map_area
435 .long feroceon_dma_unmap_area
436 .long feroceon_range_dma_flush_range
439 ENTRY(cpu_feroceon_dcache_clean_area)
440 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
441 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
445 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
446 add r0, r0, #CACHE_DLINESIZE
447 subs r1, r1, #CACHE_DLINESIZE
449 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
450 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
451 1: mcr p15, 1, r2, c15, c9, 1 @ clean L2 entry
452 add r2, r2, #CACHE_DLINESIZE
453 subs r3, r3, #CACHE_DLINESIZE
456 mcr p15, 0, r0, c7, c10, 4 @ drain WB
459 /* =============================== PageTable ============================== */
462 * cpu_feroceon_switch_mm(pgd)
464 * Set the translation base pointer to be as described by pgd.
466 * pgd: new page tables
469 ENTRY(cpu_feroceon_switch_mm)
472 * Note: we wish to call __flush_whole_cache but we need to preserve
473 * lr to do so. The only way without touching main memory is to
474 * use r2 which is normally used to test the VM_EXEC flag, and
475 * compensate locally for the skipped ops if it is not set.
477 mov r2, lr @ abuse r2 to preserve lr
478 bl __flush_whole_cache
479 @ if r2 contains the VM_EXEC bit then the next 2 ops are done already
481 mcreq p15, 0, ip, c7, c5, 0 @ invalidate I cache
482 mcreq p15, 0, ip, c7, c10, 4 @ drain WB
484 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
485 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
492 * cpu_feroceon_set_pte_ext(ptep, pte, ext)
494 * Set a PTE and flush it out
497 ENTRY(cpu_feroceon_set_pte_ext)
499 armv3_set_pte_ext wc_disable=0
501 mcr p15, 0, r0, c7, c10, 1 @ clean D entry
502 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
503 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
504 mcr p15, 1, r0, c15, c9, 1 @ clean L2 entry
506 mcr p15, 0, r0, c7, c10, 4 @ drain WB
512 .type __feroceon_setup, #function
515 mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
516 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
518 mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
521 adr r5, feroceon_crval
523 mrc p15, 0, r0, c1, c0 @ get control register v4
527 .size __feroceon_setup, . - __feroceon_setup
532 * .RVI UFRS BLDP WCAM
533 * .011 .001 ..11 0101
536 .type feroceon_crval, #object
538 crval clear=0x0000773f, mmuset=0x00003135, ucset=0x00001134
543 * Purpose : Function pointers used to access above functions - all calls
546 .type feroceon_processor_functions, #object
547 feroceon_processor_functions:
548 .word v5t_early_abort
550 .word cpu_feroceon_proc_init
551 .word cpu_feroceon_proc_fin
552 .word cpu_feroceon_reset
553 .word cpu_feroceon_do_idle
554 .word cpu_feroceon_dcache_clean_area
555 .word cpu_feroceon_switch_mm
556 .word cpu_feroceon_set_pte_ext
560 .size feroceon_processor_functions, . - feroceon_processor_functions
564 .type cpu_arch_name, #object
567 .size cpu_arch_name, . - cpu_arch_name
569 .type cpu_elf_name, #object
572 .size cpu_elf_name, . - cpu_elf_name
574 .type cpu_feroceon_name, #object
577 .size cpu_feroceon_name, . - cpu_feroceon_name
579 .type cpu_88fr531_name, #object
581 .asciz "Feroceon 88FR531-vd"
582 .size cpu_88fr531_name, . - cpu_88fr531_name
584 .type cpu_88fr571_name, #object
586 .asciz "Feroceon 88FR571-vd"
587 .size cpu_88fr571_name, . - cpu_88fr571_name
589 .type cpu_88fr131_name, #object
591 .asciz "Feroceon 88FR131"
592 .size cpu_88fr131_name, . - cpu_88fr131_name
596 .section ".proc.info.init", #alloc, #execinstr
598 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
599 .type __feroceon_old_id_proc_info,#object
600 __feroceon_old_id_proc_info:
603 .long PMD_TYPE_SECT | \
604 PMD_SECT_BUFFERABLE | \
605 PMD_SECT_CACHEABLE | \
607 PMD_SECT_AP_WRITE | \
609 .long PMD_TYPE_SECT | \
611 PMD_SECT_AP_WRITE | \
616 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
617 .long cpu_feroceon_name
618 .long feroceon_processor_functions
620 .long feroceon_user_fns
621 .long feroceon_cache_fns
622 .size __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info
625 .type __88fr531_proc_info,#object
629 .long PMD_TYPE_SECT | \
630 PMD_SECT_BUFFERABLE | \
631 PMD_SECT_CACHEABLE | \
633 PMD_SECT_AP_WRITE | \
635 .long PMD_TYPE_SECT | \
637 PMD_SECT_AP_WRITE | \
642 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
643 .long cpu_88fr531_name
644 .long feroceon_processor_functions
646 .long feroceon_user_fns
647 .long feroceon_cache_fns
648 .size __88fr531_proc_info, . - __88fr531_proc_info
650 .type __88fr571_proc_info,#object
654 .long PMD_TYPE_SECT | \
655 PMD_SECT_BUFFERABLE | \
656 PMD_SECT_CACHEABLE | \
658 PMD_SECT_AP_WRITE | \
660 .long PMD_TYPE_SECT | \
662 PMD_SECT_AP_WRITE | \
667 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
668 .long cpu_88fr571_name
669 .long feroceon_processor_functions
671 .long feroceon_user_fns
672 .long feroceon_range_cache_fns
673 .size __88fr571_proc_info, . - __88fr571_proc_info
675 .type __88fr131_proc_info,#object
679 .long PMD_TYPE_SECT | \
680 PMD_SECT_BUFFERABLE | \
681 PMD_SECT_CACHEABLE | \
683 PMD_SECT_AP_WRITE | \
685 .long PMD_TYPE_SECT | \
687 PMD_SECT_AP_WRITE | \
692 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
693 .long cpu_88fr131_name
694 .long feroceon_processor_functions
696 .long feroceon_user_fns
697 .long feroceon_range_cache_fns
698 .size __88fr131_proc_info, . - __88fr131_proc_info