drm/radeon/kms: add some new pci ids
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / rtc / rtc-twl.c
blob20687d55e7a72d5eb2871fd8504d6a2fa457e9e5
1 /*
2 * rtc-twl.c -- TWL Real Time Clock interface
4 * Copyright (C) 2007 MontaVista Software, Inc
5 * Author: Alexandre Rusev <source@mvista.com>
7 * Based on original TI driver twl4030-rtc.c
8 * Copyright (C) 2006 Texas Instruments, Inc.
10 * Based on rtc-omap.c
11 * Copyright (C) 2003 MontaVista Software, Inc.
12 * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
13 * Copyright (C) 2006 David Brownell
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
21 #include <linux/kernel.h>
22 #include <linux/errno.h>
23 #include <linux/init.h>
24 #include <linux/module.h>
25 #include <linux/types.h>
26 #include <linux/rtc.h>
27 #include <linux/bcd.h>
28 #include <linux/platform_device.h>
29 #include <linux/interrupt.h>
31 #include <linux/i2c/twl.h>
35 * RTC block register offsets (use TWL_MODULE_RTC)
37 enum {
38 REG_SECONDS_REG = 0,
39 REG_MINUTES_REG,
40 REG_HOURS_REG,
41 REG_DAYS_REG,
42 REG_MONTHS_REG,
43 REG_YEARS_REG,
44 REG_WEEKS_REG,
46 REG_ALARM_SECONDS_REG,
47 REG_ALARM_MINUTES_REG,
48 REG_ALARM_HOURS_REG,
49 REG_ALARM_DAYS_REG,
50 REG_ALARM_MONTHS_REG,
51 REG_ALARM_YEARS_REG,
53 REG_RTC_CTRL_REG,
54 REG_RTC_STATUS_REG,
55 REG_RTC_INTERRUPTS_REG,
57 REG_RTC_COMP_LSB_REG,
58 REG_RTC_COMP_MSB_REG,
60 static const u8 twl4030_rtc_reg_map[] = {
61 [REG_SECONDS_REG] = 0x00,
62 [REG_MINUTES_REG] = 0x01,
63 [REG_HOURS_REG] = 0x02,
64 [REG_DAYS_REG] = 0x03,
65 [REG_MONTHS_REG] = 0x04,
66 [REG_YEARS_REG] = 0x05,
67 [REG_WEEKS_REG] = 0x06,
69 [REG_ALARM_SECONDS_REG] = 0x07,
70 [REG_ALARM_MINUTES_REG] = 0x08,
71 [REG_ALARM_HOURS_REG] = 0x09,
72 [REG_ALARM_DAYS_REG] = 0x0A,
73 [REG_ALARM_MONTHS_REG] = 0x0B,
74 [REG_ALARM_YEARS_REG] = 0x0C,
76 [REG_RTC_CTRL_REG] = 0x0D,
77 [REG_RTC_STATUS_REG] = 0x0E,
78 [REG_RTC_INTERRUPTS_REG] = 0x0F,
80 [REG_RTC_COMP_LSB_REG] = 0x10,
81 [REG_RTC_COMP_MSB_REG] = 0x11,
83 static const u8 twl6030_rtc_reg_map[] = {
84 [REG_SECONDS_REG] = 0x00,
85 [REG_MINUTES_REG] = 0x01,
86 [REG_HOURS_REG] = 0x02,
87 [REG_DAYS_REG] = 0x03,
88 [REG_MONTHS_REG] = 0x04,
89 [REG_YEARS_REG] = 0x05,
90 [REG_WEEKS_REG] = 0x06,
92 [REG_ALARM_SECONDS_REG] = 0x08,
93 [REG_ALARM_MINUTES_REG] = 0x09,
94 [REG_ALARM_HOURS_REG] = 0x0A,
95 [REG_ALARM_DAYS_REG] = 0x0B,
96 [REG_ALARM_MONTHS_REG] = 0x0C,
97 [REG_ALARM_YEARS_REG] = 0x0D,
99 [REG_RTC_CTRL_REG] = 0x10,
100 [REG_RTC_STATUS_REG] = 0x11,
101 [REG_RTC_INTERRUPTS_REG] = 0x12,
103 [REG_RTC_COMP_LSB_REG] = 0x13,
104 [REG_RTC_COMP_MSB_REG] = 0x14,
107 /* RTC_CTRL_REG bitfields */
108 #define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01
109 #define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02
110 #define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04
111 #define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08
112 #define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10
113 #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20
114 #define BIT_RTC_CTRL_REG_GET_TIME_M 0x40
116 /* RTC_STATUS_REG bitfields */
117 #define BIT_RTC_STATUS_REG_RUN_M 0x02
118 #define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04
119 #define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08
120 #define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10
121 #define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20
122 #define BIT_RTC_STATUS_REG_ALARM_M 0x40
123 #define BIT_RTC_STATUS_REG_POWER_UP_M 0x80
125 /* RTC_INTERRUPTS_REG bitfields */
126 #define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03
127 #define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04
128 #define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08
131 /* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
132 #define ALL_TIME_REGS 6
134 /*----------------------------------------------------------------------*/
135 static u8 *rtc_reg_map;
138 * Supports 1 byte read from TWL RTC register.
140 static int twl_rtc_read_u8(u8 *data, u8 reg)
142 int ret;
144 ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
145 if (ret < 0)
146 pr_err("twl_rtc: Could not read TWL"
147 "register %X - error %d\n", reg, ret);
148 return ret;
152 * Supports 1 byte write to TWL RTC registers.
154 static int twl_rtc_write_u8(u8 data, u8 reg)
156 int ret;
158 ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
159 if (ret < 0)
160 pr_err("twl_rtc: Could not write TWL"
161 "register %X - error %d\n", reg, ret);
162 return ret;
166 * Cache the value for timer/alarm interrupts register; this is
167 * only changed by callers holding rtc ops lock (or resume).
169 static unsigned char rtc_irq_bits;
172 * Enable 1/second update and/or alarm interrupts.
174 static int set_rtc_irq_bit(unsigned char bit)
176 unsigned char val;
177 int ret;
179 val = rtc_irq_bits | bit;
180 val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
181 ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
182 if (ret == 0)
183 rtc_irq_bits = val;
185 return ret;
189 * Disable update and/or alarm interrupts.
191 static int mask_rtc_irq_bit(unsigned char bit)
193 unsigned char val;
194 int ret;
196 val = rtc_irq_bits & ~bit;
197 ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
198 if (ret == 0)
199 rtc_irq_bits = val;
201 return ret;
204 static int twl_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
206 int ret;
208 if (enabled)
209 ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
210 else
211 ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
213 return ret;
217 * Gets current TWL RTC time and date parameters.
219 * The RTC's time/alarm representation is not what gmtime(3) requires
220 * Linux to use:
222 * - Months are 1..12 vs Linux 0-11
223 * - Years are 0..99 vs Linux 1900..N (we assume 21st century)
225 static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm)
227 unsigned char rtc_data[ALL_TIME_REGS + 1];
228 int ret;
229 u8 save_control;
231 ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
232 if (ret < 0)
233 return ret;
235 save_control |= BIT_RTC_CTRL_REG_GET_TIME_M;
237 ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
238 if (ret < 0)
239 return ret;
241 ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
242 (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
244 if (ret < 0) {
245 dev_err(dev, "rtc_read_time error %d\n", ret);
246 return ret;
249 tm->tm_sec = bcd2bin(rtc_data[0]);
250 tm->tm_min = bcd2bin(rtc_data[1]);
251 tm->tm_hour = bcd2bin(rtc_data[2]);
252 tm->tm_mday = bcd2bin(rtc_data[3]);
253 tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
254 tm->tm_year = bcd2bin(rtc_data[5]) + 100;
256 return ret;
259 static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
261 unsigned char save_control;
262 unsigned char rtc_data[ALL_TIME_REGS + 1];
263 int ret;
265 rtc_data[1] = bin2bcd(tm->tm_sec);
266 rtc_data[2] = bin2bcd(tm->tm_min);
267 rtc_data[3] = bin2bcd(tm->tm_hour);
268 rtc_data[4] = bin2bcd(tm->tm_mday);
269 rtc_data[5] = bin2bcd(tm->tm_mon + 1);
270 rtc_data[6] = bin2bcd(tm->tm_year - 100);
272 /* Stop RTC while updating the TC registers */
273 ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
274 if (ret < 0)
275 goto out;
277 save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
278 ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
279 if (ret < 0)
280 goto out;
282 /* update all the time registers in one shot */
283 ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data,
284 (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
285 if (ret < 0) {
286 dev_err(dev, "rtc_set_time error %d\n", ret);
287 goto out;
290 /* Start back RTC */
291 save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
292 ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
294 out:
295 return ret;
299 * Gets current TWL RTC alarm time.
301 static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
303 unsigned char rtc_data[ALL_TIME_REGS + 1];
304 int ret;
306 ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
307 (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
308 if (ret < 0) {
309 dev_err(dev, "rtc_read_alarm error %d\n", ret);
310 return ret;
313 /* some of these fields may be wildcard/"match all" */
314 alm->time.tm_sec = bcd2bin(rtc_data[0]);
315 alm->time.tm_min = bcd2bin(rtc_data[1]);
316 alm->time.tm_hour = bcd2bin(rtc_data[2]);
317 alm->time.tm_mday = bcd2bin(rtc_data[3]);
318 alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
319 alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
321 /* report cached alarm enable state */
322 if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
323 alm->enabled = 1;
325 return ret;
328 static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
330 unsigned char alarm_data[ALL_TIME_REGS + 1];
331 int ret;
333 ret = twl_rtc_alarm_irq_enable(dev, 0);
334 if (ret)
335 goto out;
337 alarm_data[1] = bin2bcd(alm->time.tm_sec);
338 alarm_data[2] = bin2bcd(alm->time.tm_min);
339 alarm_data[3] = bin2bcd(alm->time.tm_hour);
340 alarm_data[4] = bin2bcd(alm->time.tm_mday);
341 alarm_data[5] = bin2bcd(alm->time.tm_mon + 1);
342 alarm_data[6] = bin2bcd(alm->time.tm_year - 100);
344 /* update all the alarm registers in one shot */
345 ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data,
346 (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
347 if (ret) {
348 dev_err(dev, "rtc_set_alarm error %d\n", ret);
349 goto out;
352 if (alm->enabled)
353 ret = twl_rtc_alarm_irq_enable(dev, 1);
354 out:
355 return ret;
358 static irqreturn_t twl_rtc_interrupt(int irq, void *rtc)
360 unsigned long events = 0;
361 int ret = IRQ_NONE;
362 int res;
363 u8 rd_reg;
365 res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
366 if (res)
367 goto out;
369 * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
370 * only one (ALARM or RTC) interrupt source may be enabled
371 * at time, we also could check our results
372 * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
374 if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
375 events |= RTC_IRQF | RTC_AF;
376 else
377 events |= RTC_IRQF | RTC_UF;
379 res = twl_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M,
380 REG_RTC_STATUS_REG);
381 if (res)
382 goto out;
384 if (twl_class_is_4030()) {
385 /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
386 * needs 2 reads to clear the interrupt. One read is done in
387 * do_twl_pwrirq(). Doing the second read, to clear
388 * the bit.
390 * FIXME the reason PWR_ISR1 needs an extra read is that
391 * RTC_IF retriggered until we cleared REG_ALARM_M above.
392 * But re-reading like this is a bad hack; by doing so we
393 * risk wrongly clearing status for some other IRQ (losing
394 * the interrupt). Be smarter about handling RTC_UF ...
396 res = twl_i2c_read_u8(TWL4030_MODULE_INT,
397 &rd_reg, TWL4030_INT_PWR_ISR1);
398 if (res)
399 goto out;
402 /* Notify RTC core on event */
403 rtc_update_irq(rtc, 1, events);
405 ret = IRQ_HANDLED;
406 out:
407 return ret;
410 static struct rtc_class_ops twl_rtc_ops = {
411 .read_time = twl_rtc_read_time,
412 .set_time = twl_rtc_set_time,
413 .read_alarm = twl_rtc_read_alarm,
414 .set_alarm = twl_rtc_set_alarm,
415 .alarm_irq_enable = twl_rtc_alarm_irq_enable,
418 /*----------------------------------------------------------------------*/
420 static int __devinit twl_rtc_probe(struct platform_device *pdev)
422 struct rtc_device *rtc;
423 int ret = -EINVAL;
424 int irq = platform_get_irq(pdev, 0);
425 u8 rd_reg;
427 if (irq <= 0)
428 goto out1;
430 ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
431 if (ret < 0)
432 goto out1;
434 if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
435 dev_warn(&pdev->dev, "Power up reset detected.\n");
437 if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
438 dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
440 /* Clear RTC Power up reset and pending alarm interrupts */
441 ret = twl_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
442 if (ret < 0)
443 goto out1;
445 if (twl_class_is_6030()) {
446 twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
447 REG_INT_MSK_LINE_A);
448 twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
449 REG_INT_MSK_STS_A);
452 /* Check RTC module status, Enable if it is off */
453 ret = twl_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
454 if (ret < 0)
455 goto out1;
457 if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
458 dev_info(&pdev->dev, "Enabling TWL-RTC.\n");
459 rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
460 ret = twl_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
461 if (ret < 0)
462 goto out1;
465 /* init cached IRQ enable bits */
466 ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
467 if (ret < 0)
468 goto out1;
470 rtc = rtc_device_register(pdev->name,
471 &pdev->dev, &twl_rtc_ops, THIS_MODULE);
472 if (IS_ERR(rtc)) {
473 ret = PTR_ERR(rtc);
474 dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
475 PTR_ERR(rtc));
476 goto out1;
479 ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
480 IRQF_TRIGGER_RISING,
481 dev_name(&rtc->dev), rtc);
482 if (ret < 0) {
483 dev_err(&pdev->dev, "IRQ is not free.\n");
484 goto out2;
487 platform_set_drvdata(pdev, rtc);
488 return 0;
490 out2:
491 rtc_device_unregister(rtc);
492 out1:
493 return ret;
497 * Disable all TWL RTC module interrupts.
498 * Sets status flag to free.
500 static int __devexit twl_rtc_remove(struct platform_device *pdev)
502 /* leave rtc running, but disable irqs */
503 struct rtc_device *rtc = platform_get_drvdata(pdev);
504 int irq = platform_get_irq(pdev, 0);
506 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
507 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
508 if (twl_class_is_6030()) {
509 twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
510 REG_INT_MSK_LINE_A);
511 twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
512 REG_INT_MSK_STS_A);
516 free_irq(irq, rtc);
518 rtc_device_unregister(rtc);
519 platform_set_drvdata(pdev, NULL);
520 return 0;
523 static void twl_rtc_shutdown(struct platform_device *pdev)
525 /* mask timer interrupts, but leave alarm interrupts on to enable
526 power-on when alarm is triggered */
527 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
530 #ifdef CONFIG_PM
532 static unsigned char irqstat;
534 static int twl_rtc_suspend(struct platform_device *pdev, pm_message_t state)
536 irqstat = rtc_irq_bits;
538 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
539 return 0;
542 static int twl_rtc_resume(struct platform_device *pdev)
544 set_rtc_irq_bit(irqstat);
545 return 0;
548 #else
549 #define twl_rtc_suspend NULL
550 #define twl_rtc_resume NULL
551 #endif
553 MODULE_ALIAS("platform:twl_rtc");
555 static struct platform_driver twl4030rtc_driver = {
556 .probe = twl_rtc_probe,
557 .remove = __devexit_p(twl_rtc_remove),
558 .shutdown = twl_rtc_shutdown,
559 .suspend = twl_rtc_suspend,
560 .resume = twl_rtc_resume,
561 .driver = {
562 .owner = THIS_MODULE,
563 .name = "twl_rtc",
567 static int __init twl_rtc_init(void)
569 if (twl_class_is_4030())
570 rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
571 else
572 rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
574 return platform_driver_register(&twl4030rtc_driver);
576 module_init(twl_rtc_init);
578 static void __exit twl_rtc_exit(void)
580 platform_driver_unregister(&twl4030rtc_driver);
582 module_exit(twl_rtc_exit);
584 MODULE_AUTHOR("Texas Instruments, MontaVista Software");
585 MODULE_LICENSE("GPL");