?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86, mce: port K7 bank 0 quirk to 64bit mce code
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / scsi / constants.c
blobe79e18101f872b3b7347f71c182b61249249eb77
1 /*
2 * ASCII values for a number of symbolic constants, printing functions,
3 * etc.
4 * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
5 * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
6 * by D. Gilbert and aeb (20020609)
7 * Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025
8 * Update to SPC-4 T10/1713-D Rev 5a, 14 June 2006, D. Gilbert 20060702
9 */
10
11 #include <linux/blkdev.h>
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14
15 #include <scsi/scsi.h>
16 #include <scsi/scsi_cmnd.h>
17 #include <scsi/scsi_device.h>
18 #include <scsi/scsi_host.h>
19 #include <scsi/scsi_eh.h>
20 #include <scsi/scsi_dbg.h>
21
22
23
24 /* Commands with service actions that change the command name */
25 #define MAINTENANCE_IN 0xa3
26 #define MAINTENANCE_OUT 0xa4
27 #define SERVICE_ACTION_IN_12 0xab
28 #define SERVICE_ACTION_OUT_12 0xa9
29 #define SERVICE_ACTION_IN_16 0x9e
30 #define SERVICE_ACTION_OUT_16 0x9f
31
32
33
34 #ifdef CONFIG_SCSI_CONSTANTS
35 static const char * cdb_byte0_names[] = {
36 /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
37 /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
38 "Reasssign Blocks",
39 /* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
40 /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
41 /* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
42 "Reserve(6)",
43 /* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
44 /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
45 /* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
46 /* 20-22 */ NULL, NULL, NULL,
47 /* 23-28 */ "Read Format Capacities", "Set Window",
48 "Read Capacity(10)", NULL, NULL, "Read(10)",
49 /* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
50 "Read updated block",
51 /* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
52 /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
53 /* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
54 "Read Defect Data(10)",
55 /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
56 "Read Buffer",
57 /* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)",
58 /* 40-41 */ "Change Definition", "Write Same(10)",
59 /* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support",
60 "Play audio(10)", "Get configuration", "Play audio msf",
61 "Play audio track/index",
62 /* 49-4f */ "Play track relative(10)", "Get event status notification",
63 "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
64 NULL,
65 /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
66 "Reserve track", "Send OPC info", "Mode Select(10)",
67 /* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
68 "Mode Sense(10)", "Close track/session",
69 /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
70 "Persistent reserve out",
71 /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
72 /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
73 /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
74 /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length",
75 /* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",
76 "Receive copy results",
77 /* 85-89 */ "ATA command pass through(16)", "Access control in",
78 "Access control out", "Read(16)", "Memory Export Out(16)",
79 /* 8a-8f */ "Write(16)", NULL, "Read attributes", "Write attributes",
80 "Write and verify(16)", "Verify(16)",
81 /* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
82 "Lock/unlock cache(16)", "Write same(16)", NULL,
83 /* 95-99 */ NULL, NULL, NULL, NULL, NULL,
84 /* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
85 "Service action out(16)",
86 /* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
87 "Security protocol in", "Maintenance in", "Maintenance out",
88 "Move medium/play audio(12)",
89 /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
90 "Play track relative(12)",
91 /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
92 "Read DVD structure", "Write and verify(12)",
93 /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
94 /* b2-b4 */ "Search data low(12)", "Set limits(12)",
95 "Read element status attached",
96 /* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
97 /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
98 /* ba-bc */ "Redundancy group (in), Scan",
99 "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
100 /* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
101 "Volume set (out), Send DVD structure",
102 };
103
104 struct value_name_pair {
105 int value;
106 const char * name;
107 };
108
109 static const struct value_name_pair maint_in_arr[] = {
110 {0x5, "Report device identifier"},
111 {0xa, "Report target port groups"},
112 {0xb, "Report aliases"},
113 {0xc, "Report supported operation codes"},
114 {0xd, "Report supported task management functions"},
115 {0xe, "Report priority"},
116 {0xf, "Report timestamp"},
117 };
118 #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
119
120 static const struct value_name_pair maint_out_arr[] = {
121 {0x6, "Set device identifier"},
122 {0xa, "Set target port groups"},
123 {0xb, "Change aliases"},
124 {0xe, "Set priority"},
125 {0xe, "Set timestamp"},
126 };
127 #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
128
129 static const struct value_name_pair serv_in12_arr[] = {
130 {0x1, "Read media serial number"},
131 };
132 #define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr)
133
134 static const struct value_name_pair serv_out12_arr[] = {
135 {-1, "dummy entry"},
136 };
137 #define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr)
138
139 static const struct value_name_pair serv_in16_arr[] = {
140 {0x10, "Read capacity(16)"},
141 {0x11, "Read long(16)"},
142 };
143 #define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)
144
145 static const struct value_name_pair serv_out16_arr[] = {
146 {0x11, "Write long(16)"},
147 {0x1f, "Notify data transfer device(16)"},
148 };
149 #define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr)
150
151 static const struct value_name_pair variable_length_arr[] = {
152 {0x1, "Rebuild(32)"},
153 {0x2, "Regenerate(32)"},
154 {0x3, "Xdread(32)"},
155 {0x4, "Xdwrite(32)"},
156 {0x5, "Xdwrite extended(32)"},
157 {0x6, "Xpwrite(32)"},
158 {0x7, "Xdwriteread(32)"},
159 {0x8, "Xdwrite extended(64)"},
160 {0x9, "Read(32)"},
161 {0xa, "Verify(32)"},
162 {0xb, "Write(32)"},
163 {0xc, "Write an verify(32)"},
164 {0xd, "Write same(32)"},
165 {0x8801, "Format OSD"},
166 {0x8802, "Create (osd)"},
167 {0x8803, "List (osd)"},
168 {0x8805, "Read (osd)"},
169 {0x8806, "Write (osd)"},
170 {0x8807, "Append (osd)"},
171 {0x8808, "Flush (osd)"},
172 {0x880a, "Remove (osd)"},
173 {0x880b, "Create partition (osd)"},
174 {0x880c, "Remove partition (osd)"},
175 {0x880e, "Get attributes (osd)"},
176 {0x880f, "Set attributes (osd)"},
177 {0x8812, "Create and write (osd)"},
178 {0x8815, "Create collection (osd)"},
179 {0x8816, "Remove collection (osd)"},
180 {0x8817, "List collection (osd)"},
181 {0x8818, "Set key (osd)"},
182 {0x8819, "Set master key (osd)"},
183 {0x881a, "Flush collection (osd)"},
184 {0x881b, "Flush partition (osd)"},
185 {0x881c, "Flush OSD"},
186 {0x8f7e, "Perform SCSI command (osd)"},
187 {0x8f7f, "Perform task management function (osd)"},
188 };
189 #define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr)
190
191 static const char * get_sa_name(const struct value_name_pair * arr,
192 int arr_sz, int service_action)
193 {
194 int k;
195
196 for (k = 0; k < arr_sz; ++k, ++arr) {
197 if (service_action == arr->value)
198 break;
199 }
200 return (k < arr_sz) ? arr->name : NULL;
201 }
202
203 /* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */
204 static void print_opcode_name(unsigned char * cdbp, int cdb_len)
205 {
206 int sa, len, cdb0;
207 const char * name;
208
209 cdb0 = cdbp[0];
210 switch(cdb0) {
211 case VARIABLE_LENGTH_CMD:
212 len = scsi_varlen_cdb_length(cdbp);
213 if (len < 10) {
214 printk("short variable length command, "
215 "len=%d ext_len=%d", len, cdb_len);
216 break;
217 }
218 sa = (cdbp[8] << 8) + cdbp[9];
219 name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
220 if (name) {
221 printk("%s", name);
222 if ((cdb_len > 0) && (len != cdb_len))
223 printk(", in_cdb_len=%d, ext_len=%d",
224 len, cdb_len);
225 } else {
226 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
227 if ((cdb_len > 0) && (len != cdb_len))
228 printk(", in_cdb_len=%d, ext_len=%d",
229 len, cdb_len);
230 }
231 break;
232 case MAINTENANCE_IN:
233 sa = cdbp[1] & 0x1f;
234 name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
235 if (name)
236 printk("%s", name);
237 else
238 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
239 break;
240 case MAINTENANCE_OUT:
241 sa = cdbp[1] & 0x1f;
242 name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
243 if (name)
244 printk("%s", name);
245 else
246 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
247 break;
248 case SERVICE_ACTION_IN_12:
249 sa = cdbp[1] & 0x1f;
250 name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
251 if (name)
252 printk("%s", name);
253 else
254 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
255 break;
256 case SERVICE_ACTION_OUT_12:
257 sa = cdbp[1] & 0x1f;
258 name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
259 if (name)
260 printk("%s", name);
261 else
262 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
263 break;
264 case SERVICE_ACTION_IN_16:
265 sa = cdbp[1] & 0x1f;
266 name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
267 if (name)
268 printk("%s", name);
269 else
270 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
271 break;
272 case SERVICE_ACTION_OUT_16:
273 sa = cdbp[1] & 0x1f;
274 name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
275 if (name)
276 printk("%s", name);
277 else
278 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
279 break;
280 default:
281 if (cdb0 < 0xc0) {
282 name = cdb_byte0_names[cdb0];
283 if (name)
284 printk("%s", name);
285 else
286 printk("cdb[0]=0x%x (reserved)", cdb0);
287 } else
288 printk("cdb[0]=0x%x (vendor)", cdb0);
289 break;
290 }
291 }
292
293 #else /* ifndef CONFIG_SCSI_CONSTANTS */
294
295 static void print_opcode_name(unsigned char * cdbp, int cdb_len)
296 {
297 int sa, len, cdb0;
298
299 cdb0 = cdbp[0];
300 switch(cdb0) {
301 case VARIABLE_LENGTH_CMD:
302 len = scsi_varlen_cdb_length(cdbp);
303 if (len < 10) {
304 printk("short opcode=0x%x command, len=%d "
305 "ext_len=%d", cdb0, len, cdb_len);
306 break;
307 }
308 sa = (cdbp[8] << 8) + cdbp[9];
309 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
310 if (len != cdb_len)
311 printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
312 break;
313 case MAINTENANCE_IN:
314 case MAINTENANCE_OUT:
315 case SERVICE_ACTION_IN_12:
316 case SERVICE_ACTION_OUT_12:
317 case SERVICE_ACTION_IN_16:
318 case SERVICE_ACTION_OUT_16:
319 sa = cdbp[1] & 0x1f;
320 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
321 break;
322 default:
323 if (cdb0 < 0xc0)
324 printk("cdb[0]=0x%x", cdb0);
325 else
326 printk("cdb[0]=0x%x (vendor)", cdb0);
327 break;
328 }
329 }
330 #endif
331
332 void __scsi_print_command(unsigned char *cdb)
333 {
334 int k, len;
335
336 print_opcode_name(cdb, 0);
337 len = scsi_command_size(cdb);
338 /* print out all bytes in cdb */
339 for (k = 0; k < len; ++k)
340 printk(" %02x", cdb[k]);
341 printk("\n");
342 }
343 EXPORT_SYMBOL(__scsi_print_command);
344
345 void scsi_print_command(struct scsi_cmnd *cmd)
346 {
347 int k;
348
349 scmd_printk(KERN_INFO, cmd, "CDB: ");
350 print_opcode_name(cmd->cmnd, cmd->cmd_len);
351
352 /* print out all bytes in cdb */
353 printk(":");
354 for (k = 0; k < cmd->cmd_len; ++k)
355 printk(" %02x", cmd->cmnd[k]);
356 printk("\n");
357 }
358 EXPORT_SYMBOL(scsi_print_command);
359
360 /**
361 * scsi_print_status - print scsi status description
362 * @scsi_status: scsi status value
363 *
364 * If the status is recognized, the description is printed.
365 * Otherwise "Unknown status" is output. No trailing space.
366 * If CONFIG_SCSI_CONSTANTS is not set, then print status in hex
367 * (e.g. "0x2" for Check Condition).
368 **/
369 void
370 scsi_print_status(unsigned char scsi_status) {
371 #ifdef CONFIG_SCSI_CONSTANTS
372 const char * ccp;
373
374 switch (scsi_status) {
375 case 0: ccp = "Good"; break;
376 case 0x2: ccp = "Check Condition"; break;
377 case 0x4: ccp = "Condition Met"; break;
378 case 0x8: ccp = "Busy"; break;
379 case 0x10: ccp = "Intermediate"; break;
380 case 0x14: ccp = "Intermediate-Condition Met"; break;
381 case 0x18: ccp = "Reservation Conflict"; break;
382 case 0x22: ccp = "Command Terminated"; break; /* obsolete */
383 case 0x28: ccp = "Task set Full"; break; /* was: Queue Full */
384 case 0x30: ccp = "ACA Active"; break;
385 case 0x40: ccp = "Task Aborted"; break;
386 default: ccp = "Unknown status";
387 }
388 printk(KERN_INFO "%s", ccp);
389 #else
390 printk(KERN_INFO "0x%0x", scsi_status);
391 #endif
392 }
393 EXPORT_SYMBOL(scsi_print_status);
394
395 #ifdef CONFIG_SCSI_CONSTANTS
396
397 struct error_info {
398 unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
399 const char * text;
400 };
401
402 /*
403 * The canonical list of T10 Additional Sense Codes is available at:
404 * http://www.t10.org/lists/asc-num.txt
405 */
406 static const struct error_info additional[] =
407 {
408 {0x0000, "No additional sense information"},
409 {0x0001, "Filemark detected"},
410 {0x0002, "End-of-partition/medium detected"},
411 {0x0003, "Setmark detected"},
412 {0x0004, "Beginning-of-partition/medium detected"},
413 {0x0005, "End-of-data detected"},
414 {0x0006, "I/O process terminated"},
415 {0x0011, "Audio play operation in progress"},
416 {0x0012, "Audio play operation paused"},
417 {0x0013, "Audio play operation successfully completed"},
418 {0x0014, "Audio play operation stopped due to error"},
419 {0x0015, "No current audio status to return"},
420 {0x0016, "Operation in progress"},
421 {0x0017, "Cleaning requested"},
422 {0x0018, "Erase operation in progress"},
423 {0x0019, "Locate operation in progress"},
424 {0x001A, "Rewind operation in progress"},
425 {0x001B, "Set capacity operation in progress"},
426 {0x001C, "Verify operation in progress"},
427 {0x001D, "ATA pass through information available"},
428
429 {0x0100, "No index/sector signal"},
430
431 {0x0200, "No seek complete"},
432
433 {0x0300, "Peripheral device write fault"},
434 {0x0301, "No write current"},
435 {0x0302, "Excessive write errors"},
436
437 {0x0400, "Logical unit not ready, cause not reportable"},
438 {0x0401, "Logical unit is in process of becoming ready"},
439 {0x0402, "Logical unit not ready, initializing command required"},
440 {0x0403, "Logical unit not ready, manual intervention required"},
441 {0x0404, "Logical unit not ready, format in progress"},
442 {0x0405, "Logical unit not ready, rebuild in progress"},
443 {0x0406, "Logical unit not ready, recalculation in progress"},
444 {0x0407, "Logical unit not ready, operation in progress"},
445 {0x0408, "Logical unit not ready, long write in progress"},
446 {0x0409, "Logical unit not ready, self-test in progress"},
447 {0x040A, "Logical unit not accessible, asymmetric access state "
448 "transition"},
449 {0x040B, "Logical unit not accessible, target port in standby state"},
450 {0x040C, "Logical unit not accessible, target port in unavailable "
451 "state"},
452 {0x0410, "Logical unit not ready, auxiliary memory not accessible"},
453 {0x0411, "Logical unit not ready, notify (enable spinup) required"},
454 {0x0412, "Logical unit not ready, offline"},
455
456 {0x0500, "Logical unit does not respond to selection"},
457
458 {0x0600, "No reference position found"},
459
460 {0x0700, "Multiple peripheral devices selected"},
461
462 {0x0800, "Logical unit communication failure"},
463 {0x0801, "Logical unit communication time-out"},
464 {0x0802, "Logical unit communication parity error"},
465 {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
466 {0x0804, "Unreachable copy target"},
467
468 {0x0900, "Track following error"},
469 {0x0901, "Tracking servo failure"},
470 {0x0902, "Focus servo failure"},
471 {0x0903, "Spindle servo failure"},
472 {0x0904, "Head select fault"},
473
474 {0x0A00, "Error log overflow"},
475
476 {0x0B00, "Warning"},
477 {0x0B01, "Warning - specified temperature exceeded"},
478 {0x0B02, "Warning - enclosure degraded"},
479 {0x0B03, "Warning - background self-test failed"},
480 {0x0B04, "Warning - background pre-scan detected medium error"},
481 {0x0B05, "Warning - background medium scan detected medium error"},
482
483 {0x0C00, "Write error"},
484 {0x0C01, "Write error - recovered with auto reallocation"},
485 {0x0C02, "Write error - auto reallocation failed"},
486 {0x0C03, "Write error - recommend reassignment"},
487 {0x0C04, "Compression check miscompare error"},
488 {0x0C05, "Data expansion occurred during compression"},
489 {0x0C06, "Block not compressible"},
490 {0x0C07, "Write error - recovery needed"},
491 {0x0C08, "Write error - recovery failed"},
492 {0x0C09, "Write error - loss of streaming"},
493 {0x0C0A, "Write error - padding blocks added"},
494 {0x0C0B, "Auxiliary memory write error"},
495 {0x0C0C, "Write error - unexpected unsolicited data"},
496 {0x0C0D, "Write error - not enough unsolicited data"},
497 {0x0C0F, "Defects in error window"},
498
499 {0x0D00, "Error detected by third party temporary initiator"},
500 {0x0D01, "Third party device failure"},
501 {0x0D02, "Copy target device not reachable"},
502 {0x0D03, "Incorrect copy target device type"},
503 {0x0D04, "Copy target device data underrun"},
504 {0x0D05, "Copy target device data overrun"},
505
506 {0x0E00, "Invalid information unit"},
507 {0x0E01, "Information unit too short"},
508 {0x0E02, "Information unit too long"},
509 {0x0E03, "Invalid field in command information unit"},
510
511 {0x1000, "Id CRC or ECC error"},
512 {0x1001, "Logical block guard check failed"},
513 {0x1002, "Logical block application tag check failed"},
514 {0x1003, "Logical block reference tag check failed"},
515
516 {0x1100, "Unrecovered read error"},
517 {0x1101, "Read retries exhausted"},
518 {0x1102, "Error too long to correct"},
519 {0x1103, "Multiple read errors"},
520 {0x1104, "Unrecovered read error - auto reallocate failed"},
521 {0x1105, "L-EC uncorrectable error"},
522 {0x1106, "CIRC unrecovered error"},
523 {0x1107, "Data re-synchronization error"},
524 {0x1108, "Incomplete block read"},
525 {0x1109, "No gap found"},
526 {0x110A, "Miscorrected error"},
527 {0x110B, "Unrecovered read error - recommend reassignment"},
528 {0x110C, "Unrecovered read error - recommend rewrite the data"},
529 {0x110D, "De-compression CRC error"},
530 {0x110E, "Cannot decompress using declared algorithm"},
531 {0x110F, "Error reading UPC/EAN number"},
532 {0x1110, "Error reading ISRC number"},
533 {0x1111, "Read error - loss of streaming"},
534 {0x1112, "Auxiliary memory read error"},
535 {0x1113, "Read error - failed retransmission request"},
536 {0x1114, "Read error - lba marked bad by application client"},
537
538 {0x1200, "Address mark not found for id field"},
539
540 {0x1300, "Address mark not found for data field"},
541
542 {0x1400, "Recorded entity not found"},
543 {0x1401, "Record not found"},
544 {0x1402, "Filemark or setmark not found"},
545 {0x1403, "End-of-data not found"},
546 {0x1404, "Block sequence error"},
547 {0x1405, "Record not found - recommend reassignment"},
548 {0x1406, "Record not found - data auto-reallocated"},
549 {0x1407, "Locate operation failure"},
550
551 {0x1500, "Random positioning error"},
552 {0x1501, "Mechanical positioning error"},
553 {0x1502, "Positioning error detected by read of medium"},
554
555 {0x1600, "Data synchronization mark error"},
556 {0x1601, "Data sync error - data rewritten"},
557 {0x1602, "Data sync error - recommend rewrite"},
558 {0x1603, "Data sync error - data auto-reallocated"},
559 {0x1604, "Data sync error - recommend reassignment"},
560
561 {0x1700, "Recovered data with no error correction applied"},
562 {0x1701, "Recovered data with retries"},
563 {0x1702, "Recovered data with positive head offset"},
564 {0x1703, "Recovered data with negative head offset"},
565 {0x1704, "Recovered data with retries and/or circ applied"},
566 {0x1705, "Recovered data using previous sector id"},
567 {0x1706, "Recovered data without ECC - data auto-reallocated"},
568 {0x1707, "Recovered data without ECC - recommend reassignment"},
569 {0x1708, "Recovered data without ECC - recommend rewrite"},
570 {0x1709, "Recovered data without ECC - data rewritten"},
571
572 {0x1800, "Recovered data with error correction applied"},
573 {0x1801, "Recovered data with error corr. & retries applied"},
574 {0x1802, "Recovered data - data auto-reallocated"},
575 {0x1803, "Recovered data with CIRC"},
576 {0x1804, "Recovered data with L-EC"},
577 {0x1805, "Recovered data - recommend reassignment"},
578 {0x1806, "Recovered data - recommend rewrite"},
579 {0x1807, "Recovered data with ECC - data rewritten"},
580 {0x1808, "Recovered data with linking"},
581
582 {0x1900, "Defect list error"},
583 {0x1901, "Defect list not available"},
584 {0x1902, "Defect list error in primary list"},
585 {0x1903, "Defect list error in grown list"},
586
587 {0x1A00, "Parameter list length error"},
588
589 {0x1B00, "Synchronous data transfer error"},
590
591 {0x1C00, "Defect list not found"},
592 {0x1C01, "Primary defect list not found"},
593 {0x1C02, "Grown defect list not found"},
594
595 {0x1D00, "Miscompare during verify operation"},
596
597 {0x1E00, "Recovered id with ECC correction"},
598
599 {0x1F00, "Partial defect list transfer"},
600
601 {0x2000, "Invalid command operation code"},
602 {0x2001, "Access denied - initiator pending-enrolled"},
603 {0x2002, "Access denied - no access rights"},
604 {0x2003, "Access denied - invalid mgmt id key"},
605 {0x2004, "Illegal command while in write capable state"},
606 {0x2005, "Obsolete"},
607 {0x2006, "Illegal command while in explicit address mode"},
608 {0x2007, "Illegal command while in implicit address mode"},
609 {0x2008, "Access denied - enrollment conflict"},
610 {0x2009, "Access denied - invalid LU identifier"},
611 {0x200A, "Access denied - invalid proxy token"},
612 {0x200B, "Access denied - ACL LUN conflict"},
613
614 {0x2100, "Logical block address out of range"},
615 {0x2101, "Invalid element address"},
616 {0x2102, "Invalid address for write"},
617 {0x2103, "Invalid write crossing layer jump"},
618
619 {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
620
621 {0x2400, "Invalid field in cdb"},
622 {0x2401, "CDB decryption error"},
623 {0x2402, "Obsolete"},
624 {0x2403, "Obsolete"},
625 {0x2404, "Security audit value frozen"},
626 {0x2405, "Security working key frozen"},
627 {0x2406, "Nonce not unique"},
628 {0x2407, "Nonce timestamp out of range"},
629
630 {0x2500, "Logical unit not supported"},
631
632 {0x2600, "Invalid field in parameter list"},
633 {0x2601, "Parameter not supported"},
634 {0x2602, "Parameter value invalid"},
635 {0x2603, "Threshold parameters not supported"},
636 {0x2604, "Invalid release of persistent reservation"},
637 {0x2605, "Data decryption error"},
638 {0x2606, "Too many target descriptors"},
639 {0x2607, "Unsupported target descriptor type code"},
640 {0x2608, "Too many segment descriptors"},
641 {0x2609, "Unsupported segment descriptor type code"},
642 {0x260A, "Unexpected inexact segment"},
643 {0x260B, "Inline data length exceeded"},
644 {0x260C, "Invalid operation for copy source or destination"},
645 {0x260D, "Copy segment granularity violation"},
646 {0x260E, "Invalid parameter while port is enabled"},
647 {0x260F, "Invalid data-out buffer integrity check value"},
648 {0x2610, "Data decryption key fail limit reached"},
649 {0x2611, "Incomplete key-associated data set"},
650 {0x2612, "Vendor specific key reference not found"},
651
652 {0x2700, "Write protected"},
653 {0x2701, "Hardware write protected"},
654 {0x2702, "Logical unit software write protected"},
655 {0x2703, "Associated write protect"},
656 {0x2704, "Persistent write protect"},
657 {0x2705, "Permanent write protect"},
658 {0x2706, "Conditional write protect"},
659
660 {0x2800, "Not ready to ready change, medium may have changed"},
661 {0x2801, "Import or export element accessed"},
662 {0x2802, "Format-layer may have changed"},
663
664 {0x2900, "Power on, reset, or bus device reset occurred"},
665 {0x2901, "Power on occurred"},
666 {0x2902, "Scsi bus reset occurred"},
667 {0x2903, "Bus device reset function occurred"},
668 {0x2904, "Device internal reset"},
669 {0x2905, "Transceiver mode changed to single-ended"},
670 {0x2906, "Transceiver mode changed to lvd"},
671 {0x2907, "I_T nexus loss occurred"},
672
673 {0x2A00, "Parameters changed"},
674 {0x2A01, "Mode parameters changed"},
675 {0x2A02, "Log parameters changed"},
676 {0x2A03, "Reservations preempted"},
677 {0x2A04, "Reservations released"},
678 {0x2A05, "Registrations preempted"},
679 {0x2A06, "Asymmetric access state changed"},
680 {0x2A07, "Implicit asymmetric access state transition failed"},
681 {0x2A08, "Priority changed"},
682 {0x2A09, "Capacity data has changed"},
683 {0x2A10, "Timestamp changed"},
684 {0x2A11, "Data encryption parameters changed by another i_t nexus"},
685 {0x2A12, "Data encryption parameters changed by vendor specific "
686 "event"},
687 {0x2A13, "Data encryption key instance counter has changed"},
688
689 {0x2B00, "Copy cannot execute since host cannot disconnect"},
690
691 {0x2C00, "Command sequence error"},
692 {0x2C01, "Too many windows specified"},
693 {0x2C02, "Invalid combination of windows specified"},
694 {0x2C03, "Current program area is not empty"},
695 {0x2C04, "Current program area is empty"},
696 {0x2C05, "Illegal power condition request"},
697 {0x2C06, "Persistent prevent conflict"},
698 {0x2C07, "Previous busy status"},
699 {0x2C08, "Previous task set full status"},
700 {0x2C09, "Previous reservation conflict status"},
701 {0x2C0A, "Partition or collection contains user objects"},
702 {0x2C0B, "Not reserved"},
703
704 {0x2D00, "Overwrite error on update in place"},
705
706 {0x2E00, "Insufficient time for operation"},
707
708 {0x2F00, "Commands cleared by another initiator"},
709 {0x2F01, "Commands cleared by power loss notification"},
710 {0x2F02, "Commands cleared by device server"},
711
712 {0x3000, "Incompatible medium installed"},
713 {0x3001, "Cannot read medium - unknown format"},
714 {0x3002, "Cannot read medium - incompatible format"},
715 {0x3003, "Cleaning cartridge installed"},
716 {0x3004, "Cannot write medium - unknown format"},
717 {0x3005, "Cannot write medium - incompatible format"},
718 {0x3006, "Cannot format medium - incompatible medium"},
719 {0x3007, "Cleaning failure"},
720 {0x3008, "Cannot write - application code mismatch"},
721 {0x3009, "Current session not fixated for append"},
722 {0x300A, "Cleaning request rejected"},
723 {0x300C, "WORM medium - overwrite attempted"},
724 {0x300D, "WORM medium - integrity check"},
725 {0x3010, "Medium not formatted"},
726
727 {0x3100, "Medium format corrupted"},
728 {0x3101, "Format command failed"},
729 {0x3102, "Zoned formatting failed due to spare linking"},
730
731 {0x3200, "No defect spare location available"},
732 {0x3201, "Defect list update failure"},
733
734 {0x3300, "Tape length error"},
735
736 {0x3400, "Enclosure failure"},
737
738 {0x3500, "Enclosure services failure"},
739 {0x3501, "Unsupported enclosure function"},
740 {0x3502, "Enclosure services unavailable"},
741 {0x3503, "Enclosure services transfer failure"},
742 {0x3504, "Enclosure services transfer refused"},
743 {0x3505, "Enclosure services checksum error"},
744
745 {0x3600, "Ribbon, ink, or toner failure"},
746
747 {0x3700, "Rounded parameter"},
748
749 {0x3800, "Event status notification"},
750 {0x3802, "Esn - power management class event"},
751 {0x3804, "Esn - media class event"},
752 {0x3806, "Esn - device busy class event"},
753
754 {0x3900, "Saving parameters not supported"},
755
756 {0x3A00, "Medium not present"},
757 {0x3A01, "Medium not present - tray closed"},
758 {0x3A02, "Medium not present - tray open"},
759 {0x3A03, "Medium not present - loadable"},
760 {0x3A04, "Medium not present - medium auxiliary memory accessible"},
761
762 {0x3B00, "Sequential positioning error"},
763 {0x3B01, "Tape position error at beginning-of-medium"},
764 {0x3B02, "Tape position error at end-of-medium"},
765 {0x3B03, "Tape or electronic vertical forms unit not ready"},
766 {0x3B04, "Slew failure"},
767 {0x3B05, "Paper jam"},
768 {0x3B06, "Failed to sense top-of-form"},
769 {0x3B07, "Failed to sense bottom-of-form"},
770 {0x3B08, "Reposition error"},
771 {0x3B09, "Read past end of medium"},
772 {0x3B0A, "Read past beginning of medium"},
773 {0x3B0B, "Position past end of medium"},
774 {0x3B0C, "Position past beginning of medium"},
775 {0x3B0D, "Medium destination element full"},
776 {0x3B0E, "Medium source element empty"},
777 {0x3B0F, "End of medium reached"},
778 {0x3B11, "Medium magazine not accessible"},
779 {0x3B12, "Medium magazine removed"},
780 {0x3B13, "Medium magazine inserted"},
781 {0x3B14, "Medium magazine locked"},
782 {0x3B15, "Medium magazine unlocked"},
783 {0x3B16, "Mechanical positioning or changer error"},
784 {0x3B17, "Read past end of user object"},
785
786 {0x3D00, "Invalid bits in identify message"},
787
788 {0x3E00, "Logical unit has not self-configured yet"},
789 {0x3E01, "Logical unit failure"},
790 {0x3E02, "Timeout on logical unit"},
791 {0x3E03, "Logical unit failed self-test"},
792 {0x3E04, "Logical unit unable to update self-test log"},
793
794 {0x3F00, "Target operating conditions have changed"},
795 {0x3F01, "Microcode has been changed"},
796 {0x3F02, "Changed operating definition"},
797 {0x3F03, "Inquiry data has changed"},
798 {0x3F04, "Component device attached"},
799 {0x3F05, "Device identifier changed"},
800 {0x3F06, "Redundancy group created or modified"},
801 {0x3F07, "Redundancy group deleted"},
802 {0x3F08, "Spare created or modified"},
803 {0x3F09, "Spare deleted"},
804 {0x3F0A, "Volume set created or modified"},
805 {0x3F0B, "Volume set deleted"},
806 {0x3F0C, "Volume set deassigned"},
807 {0x3F0D, "Volume set reassigned"},
808 {0x3F0E, "Reported luns data has changed"},
809 {0x3F0F, "Echo buffer overwritten"},
810 {0x3F10, "Medium loadable"},
811 {0x3F11, "Medium auxiliary memory accessible"},
812 {0x3F12, "iSCSI IP address added"},
813 {0x3F13, "iSCSI IP address removed"},
814 {0x3F14, "iSCSI IP address changed"},
815 /*
816 * {0x40NN, "Ram failure"},
817 * {0x40NN, "Diagnostic failure on component nn"},
818 * {0x41NN, "Data path failure"},
819 * {0x42NN, "Power-on or self-test failure"},
820 */
821 {0x4300, "Message error"},
822
823 {0x4400, "Internal target failure"},
824 {0x4471, "ATA device failed set features"},
825
826 {0x4500, "Select or reselect failure"},
827
828 {0x4600, "Unsuccessful soft reset"},
829
830 {0x4700, "Scsi parity error"},
831 {0x4701, "Data phase CRC error detected"},
832 {0x4702, "Scsi parity error detected during st data phase"},
833 {0x4703, "Information unit iuCRC error detected"},
834 {0x4704, "Asynchronous information protection error detected"},
835 {0x4705, "Protocol service CRC error"},
836 {0x4706, "Phy test function in progress"},
837 {0x477f, "Some commands cleared by iSCSI Protocol event"},
838
839 {0x4800, "Initiator detected error message received"},
840
841 {0x4900, "Invalid message error"},
842
843 {0x4A00, "Command phase error"},
844
845 {0x4B00, "Data phase error"},
846 {0x4B01, "Invalid target port transfer tag received"},
847 {0x4B02, "Too much write data"},
848 {0x4B03, "Ack/nak timeout"},
849 {0x4B04, "Nak received"},
850 {0x4B05, "Data offset error"},
851 {0x4B06, "Initiator response timeout"},
852
853 {0x4C00, "Logical unit failed self-configuration"},
854 /*
855 * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
856 */
857 {0x4E00, "Overlapped commands attempted"},
858
859 {0x5000, "Write append error"},
860 {0x5001, "Write append position error"},
861 {0x5002, "Position error related to timing"},
862
863 {0x5100, "Erase failure"},
864 {0x5101, "Erase failure - incomplete erase operation detected"},
865
866 {0x5200, "Cartridge fault"},
867
868 {0x5300, "Media load or eject failed"},
869 {0x5301, "Unload tape failure"},
870 {0x5302, "Medium removal prevented"},
871 {0x5303, "Medium removal prevented by data transfer element"},
872 {0x5304, "Medium thread or unthread failure"},
873
874 {0x5400, "Scsi to host system interface failure"},
875
876 {0x5500, "System resource failure"},
877 {0x5501, "System buffer full"},
878 {0x5502, "Insufficient reservation resources"},
879 {0x5503, "Insufficient resources"},
880 {0x5504, "Insufficient registration resources"},
881 {0x5505, "Insufficient access control resources"},
882 {0x5506, "Auxiliary memory out of space"},
883 {0x5507, "Quota error"},
884 {0x5508, "Maximum number of supplemental decryption keys exceeded"},
885
886 {0x5700, "Unable to recover table-of-contents"},
887
888 {0x5800, "Generation does not exist"},
889
890 {0x5900, "Updated block read"},
891
892 {0x5A00, "Operator request or state change input"},
893 {0x5A01, "Operator medium removal request"},
894 {0x5A02, "Operator selected write protect"},
895 {0x5A03, "Operator selected write permit"},
896
897 {0x5B00, "Log exception"},
898 {0x5B01, "Threshold condition met"},
899 {0x5B02, "Log counter at maximum"},
900 {0x5B03, "Log list codes exhausted"},
901
902 {0x5C00, "Rpl status change"},
903 {0x5C01, "Spindles synchronized"},
904 {0x5C02, "Spindles not synchronized"},
905
906 {0x5D00, "Failure prediction threshold exceeded"},
907 {0x5D01, "Media failure prediction threshold exceeded"},
908 {0x5D02, "Logical unit failure prediction threshold exceeded"},
909 {0x5D03, "Spare area exhaustion prediction threshold exceeded"},
910 {0x5D10, "Hardware impending failure general hard drive failure"},
911 {0x5D11, "Hardware impending failure drive error rate too high"},
912 {0x5D12, "Hardware impending failure data error rate too high"},
913 {0x5D13, "Hardware impending failure seek error rate too high"},
914 {0x5D14, "Hardware impending failure too many block reassigns"},
915 {0x5D15, "Hardware impending failure access times too high"},
916 {0x5D16, "Hardware impending failure start unit times too high"},
917 {0x5D17, "Hardware impending failure channel parametrics"},
918 {0x5D18, "Hardware impending failure controller detected"},
919 {0x5D19, "Hardware impending failure throughput performance"},
920 {0x5D1A, "Hardware impending failure seek time performance"},
921 {0x5D1B, "Hardware impending failure spin-up retry count"},
922 {0x5D1C, "Hardware impending failure drive calibration retry count"},
923 {0x5D20, "Controller impending failure general hard drive failure"},
924 {0x5D21, "Controller impending failure drive error rate too high"},
925 {0x5D22, "Controller impending failure data error rate too high"},
926 {0x5D23, "Controller impending failure seek error rate too high"},
927 {0x5D24, "Controller impending failure too many block reassigns"},
928 {0x5D25, "Controller impending failure access times too high"},
929 {0x5D26, "Controller impending failure start unit times too high"},
930 {0x5D27, "Controller impending failure channel parametrics"},
931 {0x5D28, "Controller impending failure controller detected"},
932 {0x5D29, "Controller impending failure throughput performance"},
933 {0x5D2A, "Controller impending failure seek time performance"},
934 {0x5D2B, "Controller impending failure spin-up retry count"},
935 {0x5D2C, "Controller impending failure drive calibration retry count"},
936 {0x5D30, "Data channel impending failure general hard drive failure"},
937 {0x5D31, "Data channel impending failure drive error rate too high"},
938 {0x5D32, "Data channel impending failure data error rate too high"},
939 {0x5D33, "Data channel impending failure seek error rate too high"},
940 {0x5D34, "Data channel impending failure too many block reassigns"},
941 {0x5D35, "Data channel impending failure access times too high"},
942 {0x5D36, "Data channel impending failure start unit times too high"},
943 {0x5D37, "Data channel impending failure channel parametrics"},
944 {0x5D38, "Data channel impending failure controller detected"},
945 {0x5D39, "Data channel impending failure throughput performance"},
946 {0x5D3A, "Data channel impending failure seek time performance"},
947 {0x5D3B, "Data channel impending failure spin-up retry count"},
948 {0x5D3C, "Data channel impending failure drive calibration retry "
949 "count"},
950 {0x5D40, "Servo impending failure general hard drive failure"},
951 {0x5D41, "Servo impending failure drive error rate too high"},
952 {0x5D42, "Servo impending failure data error rate too high"},
953 {0x5D43, "Servo impending failure seek error rate too high"},
954 {0x5D44, "Servo impending failure too many block reassigns"},
955 {0x5D45, "Servo impending failure access times too high"},
956 {0x5D46, "Servo impending failure start unit times too high"},
957 {0x5D47, "Servo impending failure channel parametrics"},
958 {0x5D48, "Servo impending failure controller detected"},
959 {0x5D49, "Servo impending failure throughput performance"},
960 {0x5D4A, "Servo impending failure seek time performance"},
961 {0x5D4B, "Servo impending failure spin-up retry count"},
962 {0x5D4C, "Servo impending failure drive calibration retry count"},
963 {0x5D50, "Spindle impending failure general hard drive failure"},
964 {0x5D51, "Spindle impending failure drive error rate too high"},
965 {0x5D52, "Spindle impending failure data error rate too high"},
966 {0x5D53, "Spindle impending failure seek error rate too high"},
967 {0x5D54, "Spindle impending failure too many block reassigns"},
968 {0x5D55, "Spindle impending failure access times too high"},
969 {0x5D56, "Spindle impending failure start unit times too high"},
970 {0x5D57, "Spindle impending failure channel parametrics"},
971 {0x5D58, "Spindle impending failure controller detected"},
972 {0x5D59, "Spindle impending failure throughput performance"},
973 {0x5D5A, "Spindle impending failure seek time performance"},
974 {0x5D5B, "Spindle impending failure spin-up retry count"},
975 {0x5D5C, "Spindle impending failure drive calibration retry count"},
976 {0x5D60, "Firmware impending failure general hard drive failure"},
977 {0x5D61, "Firmware impending failure drive error rate too high"},
978 {0x5D62, "Firmware impending failure data error rate too high"},
979 {0x5D63, "Firmware impending failure seek error rate too high"},
980 {0x5D64, "Firmware impending failure too many block reassigns"},
981 {0x5D65, "Firmware impending failure access times too high"},
982 {0x5D66, "Firmware impending failure start unit times too high"},
983 {0x5D67, "Firmware impending failure channel parametrics"},
984 {0x5D68, "Firmware impending failure controller detected"},
985 {0x5D69, "Firmware impending failure throughput performance"},
986 {0x5D6A, "Firmware impending failure seek time performance"},
987 {0x5D6B, "Firmware impending failure spin-up retry count"},
988 {0x5D6C, "Firmware impending failure drive calibration retry count"},
989 {0x5DFF, "Failure prediction threshold exceeded (false)"},
990
991 {0x5E00, "Low power condition on"},
992 {0x5E01, "Idle condition activated by timer"},
993 {0x5E02, "Standby condition activated by timer"},
994 {0x5E03, "Idle condition activated by command"},
995 {0x5E04, "Standby condition activated by command"},
996 {0x5E41, "Power state change to active"},
997 {0x5E42, "Power state change to idle"},
998 {0x5E43, "Power state change to standby"},
999 {0x5E45, "Power state change to sleep"},
1000 {0x5E47, "Power state change to device control"},
1001
1002 {0x6000, "Lamp failure"},
1003
1004 {0x6100, "Video acquisition error"},
1005 {0x6101, "Unable to acquire video"},
1006 {0x6102, "Out of focus"},
1007
1008 {0x6200, "Scan head positioning error"},
1009
1010 {0x6300, "End of user area encountered on this track"},
1011 {0x6301, "Packet does not fit in available space"},
1012
1013 {0x6400, "Illegal mode for this track"},
1014 {0x6401, "Invalid packet size"},
1015
1016 {0x6500, "Voltage fault"},
1017
1018 {0x6600, "Automatic document feeder cover up"},
1019 {0x6601, "Automatic document feeder lift up"},
1020 {0x6602, "Document jam in automatic document feeder"},
1021 {0x6603, "Document miss feed automatic in document feeder"},
1022
1023 {0x6700, "Configuration failure"},
1024 {0x6701, "Configuration of incapable logical units failed"},
1025 {0x6702, "Add logical unit failed"},
1026 {0x6703, "Modification of logical unit failed"},
1027 {0x6704, "Exchange of logical unit failed"},
1028 {0x6705, "Remove of logical unit failed"},
1029 {0x6706, "Attachment of logical unit failed"},
1030 {0x6707, "Creation of logical unit failed"},
1031 {0x6708, "Assign failure occurred"},
1032 {0x6709, "Multiply assigned logical unit"},
1033 {0x670A, "Set target port groups command failed"},
1034 {0x670B, "ATA device feature not enabled"},
1035
1036 {0x6800, "Logical unit not configured"},
1037
1038 {0x6900, "Data loss on logical unit"},
1039 {0x6901, "Multiple logical unit failures"},
1040 {0x6902, "Parity/data mismatch"},
1041
1042 {0x6A00, "Informational, refer to log"},
1043
1044 {0x6B00, "State change has occurred"},
1045 {0x6B01, "Redundancy level got better"},
1046 {0x6B02, "Redundancy level got worse"},
1047
1048 {0x6C00, "Rebuild failure occurred"},
1049
1050 {0x6D00, "Recalculate failure occurred"},
1051
1052 {0x6E00, "Command to logical unit failed"},
1053
1054 {0x6F00, "Copy protection key exchange failure - authentication "
1055 "failure"},
1056 {0x6F01, "Copy protection key exchange failure - key not present"},
1057 {0x6F02, "Copy protection key exchange failure - key not established"},
1058 {0x6F03, "Read of scrambled sector without authentication"},
1059 {0x6F04, "Media region code is mismatched to logical unit region"},
1060 {0x6F05, "Drive region must be permanent/region reset count error"},
1061 {0x6F06, "Insufficient block count for binding nonce recording"},
1062 {0x6F07, "Conflict in binding nonce recording"},
1063 /*
1064 * {0x70NN, "Decompression exception short algorithm id of nn"},
1065 */
1066 {0x7100, "Decompression exception long algorithm id"},
1067
1068 {0x7200, "Session fixation error"},
1069 {0x7201, "Session fixation error writing lead-in"},
1070 {0x7202, "Session fixation error writing lead-out"},
1071 {0x7203, "Session fixation error - incomplete track in session"},
1072 {0x7204, "Empty or partially written reserved track"},
1073 {0x7205, "No more track reservations allowed"},
1074 {0x7206, "RMZ extension is not allowed"},
1075 {0x7207, "No more test zone extensions are allowed"},
1076
1077 {0x7300, "Cd control error"},
1078 {0x7301, "Power calibration area almost full"},
1079 {0x7302, "Power calibration area is full"},
1080 {0x7303, "Power calibration area error"},
1081 {0x7304, "Program memory area update failure"},
1082 {0x7305, "Program memory area is full"},
1083 {0x7306, "RMA/PMA is almost full"},
1084 {0x7310, "Current power calibration area almost full"},
1085 {0x7311, "Current power calibration area is full"},
1086 {0x7317, "RDZ is full"},
1087
1088 {0x7400, "Security error"},
1089 {0x7401, "Unable to decrypt data"},
1090 {0x7402, "Unencrypted data encountered while decrypting"},
1091 {0x7403, "Incorrect data encryption key"},
1092 {0x7404, "Cryptographic integrity validation failed"},
1093 {0x7405, "Error decrypting data"},
1094 {0x7471, "Logical unit access not authorized"},
1095
1096 {0, NULL}
1097 };
1098
1099 struct error_info2 {
1100 unsigned char code1, code2_min, code2_max;
1101 const char * fmt;
1102 };
1103
1104 static const struct error_info2 additional2[] =
1105 {
1106 {0x40,0x00,0x7f,"Ram failure (%x)"},
1107 {0x40,0x80,0xff,"Diagnostic failure on component (%x)"},
1108 {0x41,0x00,0xff,"Data path failure (%x)"},
1109 {0x42,0x00,0xff,"Power-on or self-test failure (%x)"},
1110 {0x4D,0x00,0xff,"Tagged overlapped commands (queue tag %x)"},
1111 {0x70,0x00,0xff,"Decompression exception short algorithm id of %x"},
1112 {0, 0, 0, NULL}
1113 };
1114
1115 /* description of the sense key values */
1116 static const char * const snstext[] = {
1117 "No Sense", /* 0: There is no sense information */
1118 "Recovered Error", /* 1: The last command completed successfully
1119 but used error correction */
1120 "Not Ready", /* 2: The addressed target is not ready */
1121 "Medium Error", /* 3: Data error detected on the medium */
1122 "Hardware Error", /* 4: Controller or device failure */
1123 "Illegal Request", /* 5: Error in request */
1124 "Unit Attention", /* 6: Removable medium was changed, or
1125 the target has been reset, or ... */
1126 "Data Protect", /* 7: Access to the data is blocked */
1127 "Blank Check", /* 8: Reached unexpected written or unwritten
1128 region of the medium */
1129 "Vendor Specific(9)",
1130 "Copy Aborted", /* A: COPY or COMPARE was aborted */
1131 "Aborted Command", /* B: The target aborted the command */
1132 "Equal", /* C: A SEARCH DATA command found data equal */
1133 "Volume Overflow", /* D: Medium full with still data to be written */
1134 "Miscompare", /* E: Source data and data on the medium
1135 do not agree */
1136 };
1137 #endif
1138
1139 /* Get sense key string or NULL if not available */
1140 const char *
1141 scsi_sense_key_string(unsigned char key) {
1142 #ifdef CONFIG_SCSI_CONSTANTS
1143 if (key <= 0xE)
1144 return snstext[key];
1145 #endif
1146 return NULL;
1147 }
1148 EXPORT_SYMBOL(scsi_sense_key_string);
1149
1150 /*
1151 * Get additional sense code string or NULL if not available.
1152 * This string may contain a "%x" and should be printed with ascq as arg.
1153 */
1154 const char *
1155 scsi_extd_sense_format(unsigned char asc, unsigned char ascq) {
1156 #ifdef CONFIG_SCSI_CONSTANTS
1157 int i;
1158 unsigned short code = ((asc << 8) | ascq);
1159
1160 for (i=0; additional[i].text; i++)
1161 if (additional[i].code12 == code)
1162 return additional[i].text;
1163 for (i=0; additional2[i].fmt; i++)
1164 if (additional2[i].code1 == asc &&
1165 additional2[i].code2_min >= ascq &&
1166 additional2[i].code2_max <= ascq)
1167 return additional2[i].fmt;
1168 #endif
1169 return NULL;
1170 }
1171 EXPORT_SYMBOL(scsi_extd_sense_format);
1172
1173 void
1174 scsi_show_extd_sense(unsigned char asc, unsigned char ascq)
1175 {
1176 const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
1177
1178 if (extd_sense_fmt) {
1179 if (strstr(extd_sense_fmt, "%x")) {
1180 printk("Add. Sense: ");
1181 printk(extd_sense_fmt, ascq);
1182 } else
1183 printk("Add. Sense: %s", extd_sense_fmt);
1184 } else {
1185 if (asc >= 0x80)
1186 printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc,
1187 ascq);
1188 if (ascq >= 0x80)
1189 printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc,
1190 ascq);
1191 else
1192 printk("ASC=0x%x ASCQ=0x%x", asc, ascq);
1193 }
1194
1195 printk("\n");
1196 }
1197 EXPORT_SYMBOL(scsi_show_extd_sense);
1198
1199 void
1200 scsi_show_sense_hdr(struct scsi_sense_hdr *sshdr)
1201 {
1202 const char *sense_txt;
1203
1204 sense_txt = scsi_sense_key_string(sshdr->sense_key);
1205 if (sense_txt)
1206 printk("Sense Key : %s ", sense_txt);
1207 else
1208 printk("Sense Key : 0x%x ", sshdr->sense_key);
1209
1210 printk("%s", scsi_sense_is_deferred(sshdr) ? "[deferred] " :
1211 "[current] ");
1212
1213 if (sshdr->response_code >= 0x72)
1214 printk("[descriptor]");
1215
1216 printk("\n");
1217 }
1218 EXPORT_SYMBOL(scsi_show_sense_hdr);
1219
1220 /*
1221 * Print normalized SCSI sense header with a prefix.
1222 */
1223 void
1224 scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr)
1225 {
1226 printk(KERN_INFO "%s: ", name);
1227 scsi_show_sense_hdr(sshdr);
1228 printk(KERN_INFO "%s: ", name);
1229 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
1230 }
1231 EXPORT_SYMBOL(scsi_print_sense_hdr);
1232
1233 /*
1234 * Print normalized SCSI sense header with device information and a prefix.
1235 */
1236 void
1237 scsi_cmd_print_sense_hdr(struct scsi_cmnd *scmd, const char *desc,
1238 struct scsi_sense_hdr *sshdr)
1239 {
1240 scmd_printk(KERN_INFO, scmd, "%s: ", desc);
1241 scsi_show_sense_hdr(sshdr);
1242 scmd_printk(KERN_INFO, scmd, "%s: ", desc);
1243 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
1244 }
1245 EXPORT_SYMBOL(scsi_cmd_print_sense_hdr);
1246
1247 static void
1248 scsi_decode_sense_buffer(const unsigned char *sense_buffer, int sense_len,
1249 struct scsi_sense_hdr *sshdr)
1250 {
1251 int k, num, res;
1252
1253 res = scsi_normalize_sense(sense_buffer, sense_len, sshdr);
1254 if (0 == res) {
1255 /* this may be SCSI-1 sense data */
1256 num = (sense_len < 32) ? sense_len : 32;
1257 printk("Unrecognized sense data (in hex):");
1258 for (k = 0; k < num; ++k) {
1259 if (0 == (k % 16)) {
1260 printk("\n");
1261 printk(KERN_INFO " ");
1262 }
1263 printk("%02x ", sense_buffer[k]);
1264 }
1265 printk("\n");
1266 return;
1267 }
1268 }
1269
1270 static void
1271 scsi_decode_sense_extras(const unsigned char *sense_buffer, int sense_len,
1272 struct scsi_sense_hdr *sshdr)
1273 {
1274 int k, num, res;
1275
1276 if (sshdr->response_code < 0x72)
1277 {
1278 /* only decode extras for "fixed" format now */
1279 char buff[80];
1280 int blen, fixed_valid;
1281 unsigned int info;
1282
1283 fixed_valid = sense_buffer[0] & 0x80;
1284 info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) |
1285 (sense_buffer[5] << 8) | sense_buffer[6]);
1286 res = 0;
1287 memset(buff, 0, sizeof(buff));
1288 blen = sizeof(buff) - 1;
1289 if (fixed_valid)
1290 res += snprintf(buff + res, blen - res,
1291 "Info fld=0x%x", info);
1292 if (sense_buffer[2] & 0x80) {
1293 /* current command has read a filemark */
1294 if (res > 0)
1295 res += snprintf(buff + res, blen - res, ", ");
1296 res += snprintf(buff + res, blen - res, "FMK");
1297 }
1298 if (sense_buffer[2] & 0x40) {
1299 /* end-of-medium condition exists */
1300 if (res > 0)
1301 res += snprintf(buff + res, blen - res, ", ");
1302 res += snprintf(buff + res, blen - res, "EOM");
1303 }
1304 if (sense_buffer[2] & 0x20) {
1305 /* incorrect block length requested */
1306 if (res > 0)
1307 res += snprintf(buff + res, blen - res, ", ");
1308 res += snprintf(buff + res, blen - res, "ILI");
1309 }
1310 if (res > 0)
1311 printk("%s\n", buff);
1312 } else if (sshdr->additional_length > 0) {
1313 /* descriptor format with sense descriptors */
1314 num = 8 + sshdr->additional_length;
1315 num = (sense_len < num) ? sense_len : num;
1316 printk("Descriptor sense data with sense descriptors "
1317 "(in hex):");
1318 for (k = 0; k < num; ++k) {
1319 if (0 == (k % 16)) {
1320 printk("\n");
1321 printk(KERN_INFO " ");
1322 }
1323 printk("%02x ", sense_buffer[k]);
1324 }
1325
1326 printk("\n");
1327 }
1328
1329 }
1330
1331 /* Normalize and print sense buffer with name prefix */
1332 void __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
1333 int sense_len)
1334 {
1335 struct scsi_sense_hdr sshdr;
1336
1337 printk(KERN_INFO "%s: ", name);
1338 scsi_decode_sense_buffer(sense_buffer, sense_len, &sshdr);
1339 scsi_show_sense_hdr(&sshdr);
1340 scsi_decode_sense_extras(sense_buffer, sense_len, &sshdr);
1341 printk(KERN_INFO "%s: ", name);
1342 scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
1343 }
1344 EXPORT_SYMBOL(__scsi_print_sense);
1345
1346 /* Normalize and print sense buffer in SCSI command */
1347 void scsi_print_sense(char *name, struct scsi_cmnd *cmd)
1348 {
1349 struct scsi_sense_hdr sshdr;
1350
1351 scmd_printk(KERN_INFO, cmd, "");
1352 scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
1353 &sshdr);
1354 scsi_show_sense_hdr(&sshdr);
1355 scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
1356 &sshdr);
1357 scmd_printk(KERN_INFO, cmd, "");
1358 scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
1359 }
1360 EXPORT_SYMBOL(scsi_print_sense);
1361
1362 #ifdef CONFIG_SCSI_CONSTANTS
1363
1364 static const char * const hostbyte_table[]={
1365 "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",
1366 "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
1367 "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE",
1368 "DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST" };
1369 #define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table)
1370
1371 static const char * const driverbyte_table[]={
1372 "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR",
1373 "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
1374 #define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table)
1375
1376 void scsi_show_result(int result)
1377 {
1378 int hb = host_byte(result);
1379 int db = driver_byte(result);
1380
1381 printk("Result: hostbyte=%s driverbyte=%s\n",
1382 (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb] : "invalid"),
1383 (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid"));
1384 }
1385
1386 #else
1387
1388 void scsi_show_result(int result)
1389 {
1390 printk("Result: hostbyte=0x%02x driverbyte=0x%02x\n",
1391 host_byte(result), driver_byte(result));
1392 }
1393
1394 #endif
1395 EXPORT_SYMBOL(scsi_show_result);
1396
1397
1398 void scsi_print_result(struct scsi_cmnd *cmd)
1399 {
1400 scmd_printk(KERN_INFO, cmd, "");
1401 scsi_show_result(cmd->result);
1402 }
1403 EXPORT_SYMBOL(scsi_print_result);
1404
1405
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree