drivers/staging/rtl8712/rtl8712_gp_bitdef.h

   1 #ifndef __RTL8712_GP_BITDEF_H__
   2 #define __RTL8712_GP_BITDEF_H__
   3
   4 /*GPIO_CTRL*/
   5 #define _GPIO_MOD_MSK                   0xFF000000
   6 #define _GPIO_MOD_SHT                   24
   7 #define _GPIO_IO_SEL_MSK                0x00FF0000
   8 #define _GPIO_IO_SEL_SHT                16
   9 #define _GPIO_OUT_MSK                   0x0000FF00
  10 #define _GPIO_OUT_SHT                   8
  11 #define _GPIO_IN_MSK                    0x000000FF
  12 #define _GPIO_IN_SHT                    0
  13
  14 /*SYS_PINMUX_CFG*/
  15 #define _GPIOSEL_MSK                    0x0003
  16 #define _GPIOSEL_SHT                    0
  17
  18 /*LED_CFG*/
  19 #define _LED1SV                         BIT(7)
  20 #define _LED1CM_MSK                     0x0070
  21 #define _LED1CM_SHT                     4
  22 #define _LED0SV                         BIT(3)
  23 #define _LED0CM_MSK                     0x0007
  24 #define _LED0CM_SHT                     0
  25
  26 /*PHY_REG*/
  27 #define _HST_RDRDY_SHT                  0
  28 #define _HST_RDRDY_MSK                  0xFF
  29 #define _HST_RDRDY                      BIT(_HST_RDRDY_SHT)
  30 #define _CPU_WTBUSY_SHT                 1
  31 #define _CPU_WTBUSY_MSK                 0xFF
  32 #define _CPU_WTBUSY                     BIT(_CPU_WTBUSY_SHT)
  33
  34 /* 11. General Purpose Registers   (Offset: 0x02E0 - 0x02FF)*/
  35
  36 /*       8192S GPIO Config Setting (offset 0x2F1, 1 byte)*/
  37
  38 /*----------------------------------------------------------------------------*/
  39
  40 #define         GPIOMUX_EN      BIT(3)  /* When this bit is set to "1",
  41                                          * GPIO PINs will switch to MAC
  42                                          * GPIO Function*/
  43 #define         GPIOSEL_GPIO    0       /* UART or JTAG or pure GPIO*/
  44 #define         GPIOSEL_PHYDBG  1       /* PHYDBG*/
  45 #define         GPIOSEL_BT      2       /* BT_coex*/
  46 #define         GPIOSEL_WLANDBG 3       /* WLANDBG*/
  47 #define         GPIOSEL_GPIO_MASK       (~(BIT(0)|BIT(1)))
  48 /* HW Readio OFF switch (GPIO BIT) */
  49 #define         HAL_8192S_HW_GPIO_OFF_BIT       BIT(3)
  50 #define         HAL_8192S_HW_GPIO_OFF_MASK      0xF7
  51 #define         HAL_8192S_HW_GPIO_WPS_BIT       BIT(4)
  52
  53 #endif  /*__RTL8712_GP_BITDEF_H__*/
  54