?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
mac80211: unify config_interface and bss_info_changed
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / adm8211.c
blob2b9e379994a180294690d0f06735f864a27e045f
1
2 /*
3 * Linux device driver for ADMtek ADM8211 (IEEE 802.11b MAC/BBP)
4 *
5 * Copyright (c) 2003, Jouni Malinen <j@w1.fi>
6 * Copyright (c) 2004-2007, Michael Wu <flamingice@sourmilk.net>
7 * Some parts copyright (c) 2003 by David Young <dyoung@pobox.com>
8 * and used with permission.
9 *
10 * Much thanks to Infineon-ADMtek for their support of this driver.
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation. See README and COPYING for
15 * more details.
16 */
17
18 #include <linux/init.h>
19 #include <linux/if.h>
20 #include <linux/skbuff.h>
21 #include <linux/etherdevice.h>
22 #include <linux/pci.h>
23 #include <linux/delay.h>
24 #include <linux/crc32.h>
25 #include <linux/eeprom_93cx6.h>
26 #include <net/mac80211.h>
27
28 #include "adm8211.h"
29
30 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
31 MODULE_AUTHOR("Jouni Malinen <j@w1.fi>");
32 MODULE_DESCRIPTION("Driver for IEEE 802.11b wireless cards based on ADMtek ADM8211");
33 MODULE_SUPPORTED_DEVICE("ADM8211");
34 MODULE_LICENSE("GPL");
35
36 static unsigned int tx_ring_size __read_mostly = 16;
37 static unsigned int rx_ring_size __read_mostly = 16;
38
39 module_param(tx_ring_size, uint, 0);
40 module_param(rx_ring_size, uint, 0);
41
42 static struct pci_device_id adm8211_pci_id_table[] __devinitdata = {
43 /* ADMtek ADM8211 */
44 { PCI_DEVICE(0x10B7, 0x6000) }, /* 3Com 3CRSHPW796 */
45 { PCI_DEVICE(0x1200, 0x8201) }, /* ? */
46 { PCI_DEVICE(0x1317, 0x8201) }, /* ADM8211A */
47 { PCI_DEVICE(0x1317, 0x8211) }, /* ADM8211B/C */
48 { 0 }
49 };
50
51 static struct ieee80211_rate adm8211_rates[] = {
52 { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
53 { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
54 { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
55 { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
56 { .bitrate = 220, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, /* XX ?? */
57 };
58
59 static const struct ieee80211_channel adm8211_channels[] = {
60 { .center_freq = 2412},
61 { .center_freq = 2417},
62 { .center_freq = 2422},
63 { .center_freq = 2427},
64 { .center_freq = 2432},
65 { .center_freq = 2437},
66 { .center_freq = 2442},
67 { .center_freq = 2447},
68 { .center_freq = 2452},
69 { .center_freq = 2457},
70 { .center_freq = 2462},
71 { .center_freq = 2467},
72 { .center_freq = 2472},
73 { .center_freq = 2484},
74 };
75
76
77 static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom)
78 {
79 struct adm8211_priv *priv = eeprom->data;
80 u32 reg = ADM8211_CSR_READ(SPR);
81
82 eeprom->reg_data_in = reg & ADM8211_SPR_SDI;
83 eeprom->reg_data_out = reg & ADM8211_SPR_SDO;
84 eeprom->reg_data_clock = reg & ADM8211_SPR_SCLK;
85 eeprom->reg_chip_select = reg & ADM8211_SPR_SCS;
86 }
87
88 static void adm8211_eeprom_register_write(struct eeprom_93cx6 *eeprom)
89 {
90 struct adm8211_priv *priv = eeprom->data;
91 u32 reg = 0x4000 | ADM8211_SPR_SRS;
92
93 if (eeprom->reg_data_in)
94 reg |= ADM8211_SPR_SDI;
95 if (eeprom->reg_data_out)
96 reg |= ADM8211_SPR_SDO;
97 if (eeprom->reg_data_clock)
98 reg |= ADM8211_SPR_SCLK;
99 if (eeprom->reg_chip_select)
100 reg |= ADM8211_SPR_SCS;
101
102 ADM8211_CSR_WRITE(SPR, reg);
103 ADM8211_CSR_READ(SPR); /* eeprom_delay */
104 }
105
106 static int adm8211_read_eeprom(struct ieee80211_hw *dev)
107 {
108 struct adm8211_priv *priv = dev->priv;
109 unsigned int words, i;
110 struct ieee80211_chan_range chan_range;
111 u16 cr49;
112 struct eeprom_93cx6 eeprom = {
113 .data = priv,
114 .register_read = adm8211_eeprom_register_read,
115 .register_write = adm8211_eeprom_register_write
116 };
117
118 if (ADM8211_CSR_READ(CSR_TEST0) & ADM8211_CSR_TEST0_EPTYP) {
119 /* 256 * 16-bit = 512 bytes */
120 eeprom.width = PCI_EEPROM_WIDTH_93C66;
121 words = 256;
122 } else {
123 /* 64 * 16-bit = 128 bytes */
124 eeprom.width = PCI_EEPROM_WIDTH_93C46;
125 words = 64;
126 }
127
128 priv->eeprom_len = words * 2;
129 priv->eeprom = kmalloc(priv->eeprom_len, GFP_KERNEL);
130 if (!priv->eeprom)
131 return -ENOMEM;
132
133 eeprom_93cx6_multiread(&eeprom, 0, (__le16 *)priv->eeprom, words);
134
135 cr49 = le16_to_cpu(priv->eeprom->cr49);
136 priv->rf_type = (cr49 >> 3) & 0x7;
137 switch (priv->rf_type) {
138 case ADM8211_TYPE_INTERSIL:
139 case ADM8211_TYPE_RFMD:
140 case ADM8211_TYPE_MARVEL:
141 case ADM8211_TYPE_AIROHA:
142 case ADM8211_TYPE_ADMTEK:
143 break;
144
145 default:
146 if (priv->pdev->revision < ADM8211_REV_CA)
147 priv->rf_type = ADM8211_TYPE_RFMD;
148 else
149 priv->rf_type = ADM8211_TYPE_AIROHA;
150
151 printk(KERN_WARNING "%s (adm8211): Unknown RFtype %d\n",
152 pci_name(priv->pdev), (cr49 >> 3) & 0x7);
153 }
154
155 priv->bbp_type = cr49 & 0x7;
156 switch (priv->bbp_type) {
157 case ADM8211_TYPE_INTERSIL:
158 case ADM8211_TYPE_RFMD:
159 case ADM8211_TYPE_MARVEL:
160 case ADM8211_TYPE_AIROHA:
161 case ADM8211_TYPE_ADMTEK:
162 break;
163 default:
164 if (priv->pdev->revision < ADM8211_REV_CA)
165 priv->bbp_type = ADM8211_TYPE_RFMD;
166 else
167 priv->bbp_type = ADM8211_TYPE_ADMTEK;
168
169 printk(KERN_WARNING "%s (adm8211): Unknown BBPtype: %d\n",
170 pci_name(priv->pdev), cr49 >> 3);
171 }
172
173 if (priv->eeprom->country_code >= ARRAY_SIZE(cranges)) {
174 printk(KERN_WARNING "%s (adm8211): Invalid country code (%d)\n",
175 pci_name(priv->pdev), priv->eeprom->country_code);
176
177 chan_range = cranges[2];
178 } else
179 chan_range = cranges[priv->eeprom->country_code];
180
181 printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n",
182 pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max);
183
184 BUILD_BUG_ON(sizeof(priv->channels) != sizeof(adm8211_channels));
185
186 memcpy(priv->channels, adm8211_channels, sizeof(priv->channels));
187 priv->band.channels = priv->channels;
188 priv->band.n_channels = ARRAY_SIZE(adm8211_channels);
189 priv->band.bitrates = adm8211_rates;
190 priv->band.n_bitrates = ARRAY_SIZE(adm8211_rates);
191
192 for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++)
193 if (i < chan_range.min || i > chan_range.max)
194 priv->channels[i - 1].flags |= IEEE80211_CHAN_DISABLED;
195
196 switch (priv->eeprom->specific_bbptype) {
197 case ADM8211_BBP_RFMD3000:
198 case ADM8211_BBP_RFMD3002:
199 case ADM8211_BBP_ADM8011:
200 priv->specific_bbptype = priv->eeprom->specific_bbptype;
201 break;
202
203 default:
204 if (priv->pdev->revision < ADM8211_REV_CA)
205 priv->specific_bbptype = ADM8211_BBP_RFMD3000;
206 else
207 priv->specific_bbptype = ADM8211_BBP_ADM8011;
208
209 printk(KERN_WARNING "%s (adm8211): Unknown specific BBP: %d\n",
210 pci_name(priv->pdev), priv->eeprom->specific_bbptype);
211 }
212
213 switch (priv->eeprom->specific_rftype) {
214 case ADM8211_RFMD2948:
215 case ADM8211_RFMD2958:
216 case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
217 case ADM8211_MAX2820:
218 case ADM8211_AL2210L:
219 priv->transceiver_type = priv->eeprom->specific_rftype;
220 break;
221
222 default:
223 if (priv->pdev->revision == ADM8211_REV_BA)
224 priv->transceiver_type = ADM8211_RFMD2958_RF3000_CONTROL_POWER;
225 else if (priv->pdev->revision == ADM8211_REV_CA)
226 priv->transceiver_type = ADM8211_AL2210L;
227 else if (priv->pdev->revision == ADM8211_REV_AB)
228 priv->transceiver_type = ADM8211_RFMD2948;
229
230 printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n",
231 pci_name(priv->pdev), priv->eeprom->specific_rftype);
232
233 break;
234 }
235
236 printk(KERN_DEBUG "%s (adm8211): RFtype=%d BBPtype=%d Specific BBP=%d "
237 "Transceiver=%d\n", pci_name(priv->pdev), priv->rf_type,
238 priv->bbp_type, priv->specific_bbptype, priv->transceiver_type);
239
240 return 0;
241 }
242
243 static inline void adm8211_write_sram(struct ieee80211_hw *dev,
244 u32 addr, u32 data)
245 {
246 struct adm8211_priv *priv = dev->priv;
247
248 ADM8211_CSR_WRITE(WEPCTL, addr | ADM8211_WEPCTL_TABLE_WR |
249 (priv->pdev->revision < ADM8211_REV_BA ?
250 0 : ADM8211_WEPCTL_SEL_WEPTABLE ));
251 ADM8211_CSR_READ(WEPCTL);
252 msleep(1);
253
254 ADM8211_CSR_WRITE(WESK, data);
255 ADM8211_CSR_READ(WESK);
256 msleep(1);
257 }
258
259 static void adm8211_write_sram_bytes(struct ieee80211_hw *dev,
260 unsigned int addr, u8 *buf,
261 unsigned int len)
262 {
263 struct adm8211_priv *priv = dev->priv;
264 u32 reg = ADM8211_CSR_READ(WEPCTL);
265 unsigned int i;
266
267 if (priv->pdev->revision < ADM8211_REV_BA) {
268 for (i = 0; i < len; i += 2) {
269 u16 val = buf[i] | (buf[i + 1] << 8);
270 adm8211_write_sram(dev, addr + i / 2, val);
271 }
272 } else {
273 for (i = 0; i < len; i += 4) {
274 u32 val = (buf[i + 0] << 0 ) | (buf[i + 1] << 8 ) |
275 (buf[i + 2] << 16) | (buf[i + 3] << 24);
276 adm8211_write_sram(dev, addr + i / 4, val);
277 }
278 }
279
280 ADM8211_CSR_WRITE(WEPCTL, reg);
281 }
282
283 static void adm8211_clear_sram(struct ieee80211_hw *dev)
284 {
285 struct adm8211_priv *priv = dev->priv;
286 u32 reg = ADM8211_CSR_READ(WEPCTL);
287 unsigned int addr;
288
289 for (addr = 0; addr < ADM8211_SRAM_SIZE; addr++)
290 adm8211_write_sram(dev, addr, 0);
291
292 ADM8211_CSR_WRITE(WEPCTL, reg);
293 }
294
295 static int adm8211_get_stats(struct ieee80211_hw *dev,
296 struct ieee80211_low_level_stats *stats)
297 {
298 struct adm8211_priv *priv = dev->priv;
299
300 memcpy(stats, &priv->stats, sizeof(*stats));
301
302 return 0;
303 }
304
305 static int adm8211_get_tx_stats(struct ieee80211_hw *dev,
306 struct ieee80211_tx_queue_stats *stats)
307 {
308 struct adm8211_priv *priv = dev->priv;
309
310 stats[0].len = priv->cur_tx - priv->dirty_tx;
311 stats[0].limit = priv->tx_ring_size - 2;
312 stats[0].count = priv->dirty_tx;
313
314 return 0;
315 }
316
317 static void adm8211_interrupt_tci(struct ieee80211_hw *dev)
318 {
319 struct adm8211_priv *priv = dev->priv;
320 unsigned int dirty_tx;
321
322 spin_lock(&priv->lock);
323
324 for (dirty_tx = priv->dirty_tx; priv->cur_tx - dirty_tx; dirty_tx++) {
325 unsigned int entry = dirty_tx % priv->tx_ring_size;
326 u32 status = le32_to_cpu(priv->tx_ring[entry].status);
327 struct ieee80211_tx_info *txi;
328 struct adm8211_tx_ring_info *info;
329 struct sk_buff *skb;
330
331 if (status & TDES0_CONTROL_OWN ||
332 !(status & TDES0_CONTROL_DONE))
333 break;
334
335 info = &priv->tx_buffers[entry];
336 skb = info->skb;
337 txi = IEEE80211_SKB_CB(skb);
338
339 /* TODO: check TDES0_STATUS_TUF and TDES0_STATUS_TRO */
340
341 pci_unmap_single(priv->pdev, info->mapping,
342 info->skb->len, PCI_DMA_TODEVICE);
343
344 ieee80211_tx_info_clear_status(txi);
345
346 skb_pull(skb, sizeof(struct adm8211_tx_hdr));
347 memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen);
348 if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) &&
349 !(status & TDES0_STATUS_ES))
350 txi->flags |= IEEE80211_TX_STAT_ACK;
351
352 ieee80211_tx_status_irqsafe(dev, skb);
353
354 info->skb = NULL;
355 }
356
357 if (priv->cur_tx - dirty_tx < priv->tx_ring_size - 2)
358 ieee80211_wake_queue(dev, 0);
359
360 priv->dirty_tx = dirty_tx;
361 spin_unlock(&priv->lock);
362 }
363
364
365 static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
366 {
367 struct adm8211_priv *priv = dev->priv;
368 unsigned int entry = priv->cur_rx % priv->rx_ring_size;
369 u32 status;
370 unsigned int pktlen;
371 struct sk_buff *skb, *newskb;
372 unsigned int limit = priv->rx_ring_size;
373 u8 rssi, rate;
374
375 while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) {
376 if (!limit--)
377 break;
378
379 status = le32_to_cpu(priv->rx_ring[entry].status);
380 rate = (status & RDES0_STATUS_RXDR) >> 12;
381 rssi = le32_to_cpu(priv->rx_ring[entry].length) &
382 RDES1_STATUS_RSSI;
383
384 pktlen = status & RDES0_STATUS_FL;
385 if (pktlen > RX_PKT_SIZE) {
386 if (net_ratelimit())
387 printk(KERN_DEBUG "%s: frame too long (%d)\n",
388 wiphy_name(dev->wiphy), pktlen);
389 pktlen = RX_PKT_SIZE;
390 }
391
392 if (!priv->soft_rx_crc && status & RDES0_STATUS_ES) {
393 skb = NULL; /* old buffer will be reused */
394 /* TODO: update RX error stats */
395 /* TODO: check RDES0_STATUS_CRC*E */
396 } else if (pktlen < RX_COPY_BREAK) {
397 skb = dev_alloc_skb(pktlen);
398 if (skb) {
399 pci_dma_sync_single_for_cpu(
400 priv->pdev,
401 priv->rx_buffers[entry].mapping,
402 pktlen, PCI_DMA_FROMDEVICE);
403 memcpy(skb_put(skb, pktlen),
404 skb_tail_pointer(priv->rx_buffers[entry].skb),
405 pktlen);
406 pci_dma_sync_single_for_device(
407 priv->pdev,
408 priv->rx_buffers[entry].mapping,
409 RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
410 }
411 } else {
412 newskb = dev_alloc_skb(RX_PKT_SIZE);
413 if (newskb) {
414 skb = priv->rx_buffers[entry].skb;
415 skb_put(skb, pktlen);
416 pci_unmap_single(
417 priv->pdev,
418 priv->rx_buffers[entry].mapping,
419 RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
420 priv->rx_buffers[entry].skb = newskb;
421 priv->rx_buffers[entry].mapping =
422 pci_map_single(priv->pdev,
423 skb_tail_pointer(newskb),
424 RX_PKT_SIZE,
425 PCI_DMA_FROMDEVICE);
426 } else {
427 skb = NULL;
428 /* TODO: update rx dropped stats */
429 }
430
431 priv->rx_ring[entry].buffer1 =
432 cpu_to_le32(priv->rx_buffers[entry].mapping);
433 }
434
435 priv->rx_ring[entry].status = cpu_to_le32(RDES0_STATUS_OWN |
436 RDES0_STATUS_SQL);
437 priv->rx_ring[entry].length =
438 cpu_to_le32(RX_PKT_SIZE |
439 (entry == priv->rx_ring_size - 1 ?
440 RDES1_CONTROL_RER : 0));
441
442 if (skb) {
443 struct ieee80211_rx_status rx_status = {0};
444
445 if (priv->pdev->revision < ADM8211_REV_CA)
446 rx_status.signal = rssi;
447 else
448 rx_status.signal = 100 - rssi;
449
450 rx_status.rate_idx = rate;
451
452 rx_status.freq = adm8211_channels[priv->channel - 1].center_freq;
453 rx_status.band = IEEE80211_BAND_2GHZ;
454
455 ieee80211_rx_irqsafe(dev, skb, &rx_status);
456 }
457
458 entry = (++priv->cur_rx) % priv->rx_ring_size;
459 }
460
461 /* TODO: check LPC and update stats? */
462 }
463
464
465 static irqreturn_t adm8211_interrupt(int irq, void *dev_id)
466 {
467 #define ADM8211_INT(x) \
468 do { \
469 if (unlikely(stsr & ADM8211_STSR_ ## x)) \
470 printk(KERN_DEBUG "%s: " #x "\n", wiphy_name(dev->wiphy)); \
471 } while (0)
472
473 struct ieee80211_hw *dev = dev_id;
474 struct adm8211_priv *priv = dev->priv;
475 u32 stsr = ADM8211_CSR_READ(STSR);
476 ADM8211_CSR_WRITE(STSR, stsr);
477 if (stsr == 0xffffffff)
478 return IRQ_HANDLED;
479
480 if (!(stsr & (ADM8211_STSR_NISS | ADM8211_STSR_AISS)))
481 return IRQ_HANDLED;
482
483 if (stsr & ADM8211_STSR_RCI)
484 adm8211_interrupt_rci(dev);
485 if (stsr & ADM8211_STSR_TCI)
486 adm8211_interrupt_tci(dev);
487
488 ADM8211_INT(PCF);
489 ADM8211_INT(BCNTC);
490 ADM8211_INT(GPINT);
491 ADM8211_INT(ATIMTC);
492 ADM8211_INT(TSFTF);
493 ADM8211_INT(TSCZ);
494 ADM8211_INT(SQL);
495 ADM8211_INT(WEPTD);
496 ADM8211_INT(ATIME);
497 ADM8211_INT(TEIS);
498 ADM8211_INT(FBE);
499 ADM8211_INT(REIS);
500 ADM8211_INT(GPTT);
501 ADM8211_INT(RPS);
502 ADM8211_INT(RDU);
503 ADM8211_INT(TUF);
504 ADM8211_INT(TPS);
505
506 return IRQ_HANDLED;
507
508 #undef ADM8211_INT
509 }
510
511 #define WRITE_SYN(name,v_mask,v_shift,a_mask,a_shift,bits,prewrite,postwrite)\
512 static void adm8211_rf_write_syn_ ## name (struct ieee80211_hw *dev, \
513 u16 addr, u32 value) { \
514 struct adm8211_priv *priv = dev->priv; \
515 unsigned int i; \
516 u32 reg, bitbuf; \
517 \
518 value &= v_mask; \
519 addr &= a_mask; \
520 bitbuf = (value << v_shift) | (addr << a_shift); \
521 \
522 ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_1); \
523 ADM8211_CSR_READ(SYNRF); \
524 ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_0); \
525 ADM8211_CSR_READ(SYNRF); \
526 \
527 if (prewrite) { \
528 ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_WRITE_SYNDATA_0); \
529 ADM8211_CSR_READ(SYNRF); \
530 } \
531 \
532 for (i = 0; i <= bits; i++) { \
533 if (bitbuf & (1 << (bits - i))) \
534 reg = ADM8211_SYNRF_WRITE_SYNDATA_1; \
535 else \
536 reg = ADM8211_SYNRF_WRITE_SYNDATA_0; \
537 \
538 ADM8211_CSR_WRITE(SYNRF, reg); \
539 ADM8211_CSR_READ(SYNRF); \
540 \
541 ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_1); \
542 ADM8211_CSR_READ(SYNRF); \
543 ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_0); \
544 ADM8211_CSR_READ(SYNRF); \
545 } \
546 \
547 if (postwrite == 1) { \
548 ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_0); \
549 ADM8211_CSR_READ(SYNRF); \
550 } \
551 if (postwrite == 2) { \
552 ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_1); \
553 ADM8211_CSR_READ(SYNRF); \
554 } \
555 \
556 ADM8211_CSR_WRITE(SYNRF, 0); \
557 ADM8211_CSR_READ(SYNRF); \
558 }
559
560 WRITE_SYN(max2820, 0x00FFF, 0, 0x0F, 12, 15, 1, 1)
561 WRITE_SYN(al2210l, 0xFFFFF, 4, 0x0F, 0, 23, 1, 1)
562 WRITE_SYN(rfmd2958, 0x3FFFF, 0, 0x1F, 18, 23, 0, 1)
563 WRITE_SYN(rfmd2948, 0x0FFFF, 4, 0x0F, 0, 21, 0, 2)
564
565 #undef WRITE_SYN
566
567 static int adm8211_write_bbp(struct ieee80211_hw *dev, u8 addr, u8 data)
568 {
569 struct adm8211_priv *priv = dev->priv;
570 unsigned int timeout;
571 u32 reg;
572
573 timeout = 10;
574 while (timeout > 0) {
575 reg = ADM8211_CSR_READ(BBPCTL);
576 if (!(reg & (ADM8211_BBPCTL_WR | ADM8211_BBPCTL_RD)))
577 break;
578 timeout--;
579 msleep(2);
580 }
581
582 if (timeout == 0) {
583 printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
584 " prewrite (reg=0x%08x)\n",
585 wiphy_name(dev->wiphy), addr, data, reg);
586 return -ETIMEDOUT;
587 }
588
589 switch (priv->bbp_type) {
590 case ADM8211_TYPE_INTERSIL:
591 reg = ADM8211_BBPCTL_MMISEL; /* three wire interface */
592 break;
593 case ADM8211_TYPE_RFMD:
594 reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP |
595 (0x01 << 18);
596 break;
597 case ADM8211_TYPE_ADMTEK:
598 reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP |
599 (0x05 << 18);
600 break;
601 }
602 reg |= ADM8211_BBPCTL_WR | (addr << 8) | data;
603
604 ADM8211_CSR_WRITE(BBPCTL, reg);
605
606 timeout = 10;
607 while (timeout > 0) {
608 reg = ADM8211_CSR_READ(BBPCTL);
609 if (!(reg & ADM8211_BBPCTL_WR))
610 break;
611 timeout--;
612 msleep(2);
613 }
614
615 if (timeout == 0) {
616 ADM8211_CSR_WRITE(BBPCTL, ADM8211_CSR_READ(BBPCTL) &
617 ~ADM8211_BBPCTL_WR);
618 printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
619 " postwrite (reg=0x%08x)\n",
620 wiphy_name(dev->wiphy), addr, data, reg);
621 return -ETIMEDOUT;
622 }
623
624 return 0;
625 }
626
627 static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan)
628 {
629 static const u32 adm8211_rfmd2958_reg5[] =
630 {0x22BD, 0x22D2, 0x22E8, 0x22FE, 0x2314, 0x232A, 0x2340,
631 0x2355, 0x236B, 0x2381, 0x2397, 0x23AD, 0x23C2, 0x23F7};
632 static const u32 adm8211_rfmd2958_reg6[] =
633 {0x05D17, 0x3A2E8, 0x2E8BA, 0x22E8B, 0x1745D, 0x0BA2E, 0x00000,
634 0x345D1, 0x28BA2, 0x1D174, 0x11745, 0x05D17, 0x3A2E8, 0x11745};
635
636 struct adm8211_priv *priv = dev->priv;
637 u8 ant_power = priv->ant_power > 0x3F ?
638 priv->eeprom->antenna_power[chan - 1] : priv->ant_power;
639 u8 tx_power = priv->tx_power > 0x3F ?
640 priv->eeprom->tx_power[chan - 1] : priv->tx_power;
641 u8 lpf_cutoff = priv->lpf_cutoff == 0xFF ?
642 priv->eeprom->lpf_cutoff[chan - 1] : priv->lpf_cutoff;
643 u8 lnags_thresh = priv->lnags_threshold == 0xFF ?
644 priv->eeprom->lnags_threshold[chan - 1] : priv->lnags_threshold;
645 u32 reg;
646
647 ADM8211_IDLE();
648
649 /* Program synthesizer to new channel */
650 switch (priv->transceiver_type) {
651 case ADM8211_RFMD2958:
652 case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
653 adm8211_rf_write_syn_rfmd2958(dev, 0x00, 0x04007);
654 adm8211_rf_write_syn_rfmd2958(dev, 0x02, 0x00033);
655
656 adm8211_rf_write_syn_rfmd2958(dev, 0x05,
657 adm8211_rfmd2958_reg5[chan - 1]);
658 adm8211_rf_write_syn_rfmd2958(dev, 0x06,
659 adm8211_rfmd2958_reg6[chan - 1]);
660 break;
661
662 case ADM8211_RFMD2948:
663 adm8211_rf_write_syn_rfmd2948(dev, SI4126_MAIN_CONF,
664 SI4126_MAIN_XINDIV2);
665 adm8211_rf_write_syn_rfmd2948(dev, SI4126_POWERDOWN,
666 SI4126_POWERDOWN_PDIB |
667 SI4126_POWERDOWN_PDRB);
668 adm8211_rf_write_syn_rfmd2948(dev, SI4126_PHASE_DET_GAIN, 0);
669 adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_N_DIV,
670 (chan == 14 ?
671 2110 : (2033 + (chan * 5))));
672 adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_N_DIV, 1496);
673 adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_R_DIV, 44);
674 adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_R_DIV, 44);
675 break;
676
677 case ADM8211_MAX2820:
678 adm8211_rf_write_syn_max2820(dev, 0x3,
679 (chan == 14 ? 0x054 : (0x7 + (chan * 5))));
680 break;
681
682 case ADM8211_AL2210L:
683 adm8211_rf_write_syn_al2210l(dev, 0x0,
684 (chan == 14 ? 0x229B4 : (0x22967 + (chan * 5))));
685 break;
686
687 default:
688 printk(KERN_DEBUG "%s: unsupported transceiver type %d\n",
689 wiphy_name(dev->wiphy), priv->transceiver_type);
690 break;
691 }
692
693 /* write BBP regs */
694 if (priv->bbp_type == ADM8211_TYPE_RFMD) {
695
696 /* SMC 2635W specific? adm8211b doesn't use the 2948 though.. */
697 /* TODO: remove if SMC 2635W doesn't need this */
698 if (priv->transceiver_type == ADM8211_RFMD2948) {
699 reg = ADM8211_CSR_READ(GPIO);
700 reg &= 0xfffc0000;
701 reg |= ADM8211_CSR_GPIO_EN0;
702 if (chan != 14)
703 reg |= ADM8211_CSR_GPIO_O0;
704 ADM8211_CSR_WRITE(GPIO, reg);
705 }
706
707 if (priv->transceiver_type == ADM8211_RFMD2958) {
708 /* set PCNT2 */
709 adm8211_rf_write_syn_rfmd2958(dev, 0x0B, 0x07100);
710 /* set PCNT1 P_DESIRED/MID_BIAS */
711 reg = le16_to_cpu(priv->eeprom->cr49);
712 reg >>= 13;
713 reg <<= 15;
714 reg |= ant_power << 9;
715 adm8211_rf_write_syn_rfmd2958(dev, 0x0A, reg);
716 /* set TXRX TX_GAIN */
717 adm8211_rf_write_syn_rfmd2958(dev, 0x09, 0x00050 |
718 (priv->pdev->revision < ADM8211_REV_CA ? tx_power : 0));
719 } else {
720 reg = ADM8211_CSR_READ(PLCPHD);
721 reg &= 0xff00ffff;
722 reg |= tx_power << 18;
723 ADM8211_CSR_WRITE(PLCPHD, reg);
724 }
725
726 ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF |
727 ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST);
728 ADM8211_CSR_READ(SYNRF);
729 msleep(30);
730
731 /* RF3000 BBP */
732 if (priv->transceiver_type != ADM8211_RFMD2958)
733 adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT,
734 tx_power<<2);
735 adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, lpf_cutoff);
736 adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, lnags_thresh);
737 adm8211_write_bbp(dev, 0x1c, priv->pdev->revision == ADM8211_REV_BA ?
738 priv->eeprom->cr28 : 0);
739 adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29);
740
741 ADM8211_CSR_WRITE(SYNRF, 0);
742
743 /* Nothing to do for ADMtek BBP */
744 } else if (priv->bbp_type != ADM8211_TYPE_ADMTEK)
745 printk(KERN_DEBUG "%s: unsupported BBP type %d\n",
746 wiphy_name(dev->wiphy), priv->bbp_type);
747
748 ADM8211_RESTORE();
749
750 /* update current channel for adhoc (and maybe AP mode) */
751 reg = ADM8211_CSR_READ(CAP0);
752 reg &= ~0xF;
753 reg |= chan;
754 ADM8211_CSR_WRITE(CAP0, reg);
755
756 return 0;
757 }
758
759 static void adm8211_update_mode(struct ieee80211_hw *dev)
760 {
761 struct adm8211_priv *priv = dev->priv;
762
763 ADM8211_IDLE();
764
765 priv->soft_rx_crc = 0;
766 switch (priv->mode) {
767 case NL80211_IFTYPE_STATION:
768 priv->nar &= ~(ADM8211_NAR_PR | ADM8211_NAR_EA);
769 priv->nar |= ADM8211_NAR_ST | ADM8211_NAR_SR;
770 break;
771 case NL80211_IFTYPE_ADHOC:
772 priv->nar &= ~ADM8211_NAR_PR;
773 priv->nar |= ADM8211_NAR_EA | ADM8211_NAR_ST | ADM8211_NAR_SR;
774
775 /* don't trust the error bits on rev 0x20 and up in adhoc */
776 if (priv->pdev->revision >= ADM8211_REV_BA)
777 priv->soft_rx_crc = 1;
778 break;
779 case NL80211_IFTYPE_MONITOR:
780 priv->nar &= ~(ADM8211_NAR_EA | ADM8211_NAR_ST);
781 priv->nar |= ADM8211_NAR_PR | ADM8211_NAR_SR;
782 break;
783 }
784
785 ADM8211_RESTORE();
786 }
787
788 static void adm8211_hw_init_syn(struct ieee80211_hw *dev)
789 {
790 struct adm8211_priv *priv = dev->priv;
791
792 switch (priv->transceiver_type) {
793 case ADM8211_RFMD2958:
794 case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
795 /* comments taken from ADMtek vendor driver */
796
797 /* Reset RF2958 after power on */
798 adm8211_rf_write_syn_rfmd2958(dev, 0x1F, 0x00000);
799 /* Initialize RF VCO Core Bias to maximum */
800 adm8211_rf_write_syn_rfmd2958(dev, 0x0C, 0x3001F);
801 /* Initialize IF PLL */
802 adm8211_rf_write_syn_rfmd2958(dev, 0x01, 0x29C03);
803 /* Initialize IF PLL Coarse Tuning */
804 adm8211_rf_write_syn_rfmd2958(dev, 0x03, 0x1FF6F);
805 /* Initialize RF PLL */
806 adm8211_rf_write_syn_rfmd2958(dev, 0x04, 0x29403);
807 /* Initialize RF PLL Coarse Tuning */
808 adm8211_rf_write_syn_rfmd2958(dev, 0x07, 0x1456F);
809 /* Initialize TX gain and filter BW (R9) */
810 adm8211_rf_write_syn_rfmd2958(dev, 0x09,
811 (priv->transceiver_type == ADM8211_RFMD2958 ?
812 0x10050 : 0x00050));
813 /* Initialize CAL register */
814 adm8211_rf_write_syn_rfmd2958(dev, 0x08, 0x3FFF8);
815 break;
816
817 case ADM8211_MAX2820:
818 adm8211_rf_write_syn_max2820(dev, 0x1, 0x01E);
819 adm8211_rf_write_syn_max2820(dev, 0x2, 0x001);
820 adm8211_rf_write_syn_max2820(dev, 0x3, 0x054);
821 adm8211_rf_write_syn_max2820(dev, 0x4, 0x310);
822 adm8211_rf_write_syn_max2820(dev, 0x5, 0x000);
823 break;
824
825 case ADM8211_AL2210L:
826 adm8211_rf_write_syn_al2210l(dev, 0x0, 0x0196C);
827 adm8211_rf_write_syn_al2210l(dev, 0x1, 0x007CB);
828 adm8211_rf_write_syn_al2210l(dev, 0x2, 0x3582F);
829 adm8211_rf_write_syn_al2210l(dev, 0x3, 0x010A9);
830 adm8211_rf_write_syn_al2210l(dev, 0x4, 0x77280);
831 adm8211_rf_write_syn_al2210l(dev, 0x5, 0x45641);
832 adm8211_rf_write_syn_al2210l(dev, 0x6, 0xEA130);
833 adm8211_rf_write_syn_al2210l(dev, 0x7, 0x80000);
834 adm8211_rf_write_syn_al2210l(dev, 0x8, 0x7850F);
835 adm8211_rf_write_syn_al2210l(dev, 0x9, 0xF900C);
836 adm8211_rf_write_syn_al2210l(dev, 0xA, 0x00000);
837 adm8211_rf_write_syn_al2210l(dev, 0xB, 0x00000);
838 break;
839
840 case ADM8211_RFMD2948:
841 default:
842 break;
843 }
844 }
845
846 static int adm8211_hw_init_bbp(struct ieee80211_hw *dev)
847 {
848 struct adm8211_priv *priv = dev->priv;
849 u32 reg;
850
851 /* write addresses */
852 if (priv->bbp_type == ADM8211_TYPE_INTERSIL) {
853 ADM8211_CSR_WRITE(MMIWA, 0x100E0C0A);
854 ADM8211_CSR_WRITE(MMIRD0, 0x00007C7E);
855 ADM8211_CSR_WRITE(MMIRD1, 0x00100000);
856 } else if (priv->bbp_type == ADM8211_TYPE_RFMD ||
857 priv->bbp_type == ADM8211_TYPE_ADMTEK) {
858 /* check specific BBP type */
859 switch (priv->specific_bbptype) {
860 case ADM8211_BBP_RFMD3000:
861 case ADM8211_BBP_RFMD3002:
862 ADM8211_CSR_WRITE(MMIWA, 0x00009101);
863 ADM8211_CSR_WRITE(MMIRD0, 0x00000301);
864 break;
865
866 case ADM8211_BBP_ADM8011:
867 ADM8211_CSR_WRITE(MMIWA, 0x00008903);
868 ADM8211_CSR_WRITE(MMIRD0, 0x00001716);
869
870 reg = ADM8211_CSR_READ(BBPCTL);
871 reg &= ~ADM8211_BBPCTL_TYPE;
872 reg |= 0x5 << 18;
873 ADM8211_CSR_WRITE(BBPCTL, reg);
874 break;
875 }
876
877 switch (priv->pdev->revision) {
878 case ADM8211_REV_CA:
879 if (priv->transceiver_type == ADM8211_RFMD2958 ||
880 priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
881 priv->transceiver_type == ADM8211_RFMD2948)
882 ADM8211_CSR_WRITE(SYNCTL, 0x1 << 22);
883 else if (priv->transceiver_type == ADM8211_MAX2820 ||
884 priv->transceiver_type == ADM8211_AL2210L)
885 ADM8211_CSR_WRITE(SYNCTL, 0x3 << 22);
886 break;
887
888 case ADM8211_REV_BA:
889 reg = ADM8211_CSR_READ(MMIRD1);
890 reg &= 0x0000FFFF;
891 reg |= 0x7e100000;
892 ADM8211_CSR_WRITE(MMIRD1, reg);
893 break;
894
895 case ADM8211_REV_AB:
896 case ADM8211_REV_AF:
897 default:
898 ADM8211_CSR_WRITE(MMIRD1, 0x7e100000);
899 break;
900 }
901
902 /* For RFMD */
903 ADM8211_CSR_WRITE(MACTEST, 0x800);
904 }
905
906 adm8211_hw_init_syn(dev);
907
908 /* Set RF Power control IF pin to PE1+PHYRST# */
909 ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF |
910 ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST);
911 ADM8211_CSR_READ(SYNRF);
912 msleep(20);
913
914 /* write BBP regs */
915 if (priv->bbp_type == ADM8211_TYPE_RFMD) {
916 /* RF3000 BBP */
917 /* another set:
918 * 11: c8
919 * 14: 14
920 * 15: 50 (chan 1..13; chan 14: d0)
921 * 1c: 00
922 * 1d: 84
923 */
924 adm8211_write_bbp(dev, RF3000_CCA_CTRL, 0x80);
925 /* antenna selection: diversity */
926 adm8211_write_bbp(dev, RF3000_DIVERSITY__RSSI, 0x80);
927 adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, 0x74);
928 adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, 0x38);
929 adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, 0x40);
930
931 if (priv->eeprom->major_version < 2) {
932 adm8211_write_bbp(dev, 0x1c, 0x00);
933 adm8211_write_bbp(dev, 0x1d, 0x80);
934 } else {
935 if (priv->pdev->revision == ADM8211_REV_BA)
936 adm8211_write_bbp(dev, 0x1c, priv->eeprom->cr28);
937 else
938 adm8211_write_bbp(dev, 0x1c, 0x00);
939
940 adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29);
941 }
942 } else if (priv->bbp_type == ADM8211_TYPE_ADMTEK) {
943 /* reset baseband */
944 adm8211_write_bbp(dev, 0x00, 0xFF);
945 /* antenna selection: diversity */
946 adm8211_write_bbp(dev, 0x07, 0x0A);
947
948 /* TODO: find documentation for this */
949 switch (priv->transceiver_type) {
950 case ADM8211_RFMD2958:
951 case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
952 adm8211_write_bbp(dev, 0x00, 0x00);
953 adm8211_write_bbp(dev, 0x01, 0x00);
954 adm8211_write_bbp(dev, 0x02, 0x00);
955 adm8211_write_bbp(dev, 0x03, 0x00);
956 adm8211_write_bbp(dev, 0x06, 0x0f);
957 adm8211_write_bbp(dev, 0x09, 0x00);
958 adm8211_write_bbp(dev, 0x0a, 0x00);
959 adm8211_write_bbp(dev, 0x0b, 0x00);
960 adm8211_write_bbp(dev, 0x0c, 0x00);
961 adm8211_write_bbp(dev, 0x0f, 0xAA);
962 adm8211_write_bbp(dev, 0x10, 0x8c);
963 adm8211_write_bbp(dev, 0x11, 0x43);
964 adm8211_write_bbp(dev, 0x18, 0x40);
965 adm8211_write_bbp(dev, 0x20, 0x23);
966 adm8211_write_bbp(dev, 0x21, 0x02);
967 adm8211_write_bbp(dev, 0x22, 0x28);
968 adm8211_write_bbp(dev, 0x23, 0x30);
969 adm8211_write_bbp(dev, 0x24, 0x2d);
970 adm8211_write_bbp(dev, 0x28, 0x35);
971 adm8211_write_bbp(dev, 0x2a, 0x8c);
972 adm8211_write_bbp(dev, 0x2b, 0x81);
973 adm8211_write_bbp(dev, 0x2c, 0x44);
974 adm8211_write_bbp(dev, 0x2d, 0x0A);
975 adm8211_write_bbp(dev, 0x29, 0x40);
976 adm8211_write_bbp(dev, 0x60, 0x08);
977 adm8211_write_bbp(dev, 0x64, 0x01);
978 break;
979
980 case ADM8211_MAX2820:
981 adm8211_write_bbp(dev, 0x00, 0x00);
982 adm8211_write_bbp(dev, 0x01, 0x00);
983 adm8211_write_bbp(dev, 0x02, 0x00);
984 adm8211_write_bbp(dev, 0x03, 0x00);
985 adm8211_write_bbp(dev, 0x06, 0x0f);
986 adm8211_write_bbp(dev, 0x09, 0x05);
987 adm8211_write_bbp(dev, 0x0a, 0x02);
988 adm8211_write_bbp(dev, 0x0b, 0x00);
989 adm8211_write_bbp(dev, 0x0c, 0x0f);
990 adm8211_write_bbp(dev, 0x0f, 0x55);
991 adm8211_write_bbp(dev, 0x10, 0x8d);
992 adm8211_write_bbp(dev, 0x11, 0x43);
993 adm8211_write_bbp(dev, 0x18, 0x4a);
994 adm8211_write_bbp(dev, 0x20, 0x20);
995 adm8211_write_bbp(dev, 0x21, 0x02);
996 adm8211_write_bbp(dev, 0x22, 0x23);
997 adm8211_write_bbp(dev, 0x23, 0x30);
998 adm8211_write_bbp(dev, 0x24, 0x2d);
999 adm8211_write_bbp(dev, 0x2a, 0x8c);
1000 adm8211_write_bbp(dev, 0x2b, 0x81);
1001 adm8211_write_bbp(dev, 0x2c, 0x44);
1002 adm8211_write_bbp(dev, 0x29, 0x4a);
1003 adm8211_write_bbp(dev, 0x60, 0x2b);
1004 adm8211_write_bbp(dev, 0x64, 0x01);
1005 break;
1006
1007 case ADM8211_AL2210L:
1008 adm8211_write_bbp(dev, 0x00, 0x00);
1009 adm8211_write_bbp(dev, 0x01, 0x00);
1010 adm8211_write_bbp(dev, 0x02, 0x00);
1011 adm8211_write_bbp(dev, 0x03, 0x00);
1012 adm8211_write_bbp(dev, 0x06, 0x0f);
1013 adm8211_write_bbp(dev, 0x07, 0x05);
1014 adm8211_write_bbp(dev, 0x08, 0x03);
1015 adm8211_write_bbp(dev, 0x09, 0x00);
1016 adm8211_write_bbp(dev, 0x0a, 0x00);
1017 adm8211_write_bbp(dev, 0x0b, 0x00);
1018 adm8211_write_bbp(dev, 0x0c, 0x10);
1019 adm8211_write_bbp(dev, 0x0f, 0x55);
1020 adm8211_write_bbp(dev, 0x10, 0x8d);
1021 adm8211_write_bbp(dev, 0x11, 0x43);
1022 adm8211_write_bbp(dev, 0x18, 0x4a);
1023 adm8211_write_bbp(dev, 0x20, 0x20);
1024 adm8211_write_bbp(dev, 0x21, 0x02);
1025 adm8211_write_bbp(dev, 0x22, 0x23);
1026 adm8211_write_bbp(dev, 0x23, 0x30);
1027 adm8211_write_bbp(dev, 0x24, 0x2d);
1028 adm8211_write_bbp(dev, 0x2a, 0xaa);
1029 adm8211_write_bbp(dev, 0x2b, 0x81);
1030 adm8211_write_bbp(dev, 0x2c, 0x44);
1031 adm8211_write_bbp(dev, 0x29, 0xfa);
1032 adm8211_write_bbp(dev, 0x60, 0x2d);
1033 adm8211_write_bbp(dev, 0x64, 0x01);
1034 break;
1035
1036 case ADM8211_RFMD2948:
1037 break;
1038
1039 default:
1040 printk(KERN_DEBUG "%s: unsupported transceiver %d\n",
1041 wiphy_name(dev->wiphy), priv->transceiver_type);
1042 break;
1043 }
1044 } else
1045 printk(KERN_DEBUG "%s: unsupported BBP %d\n",
1046 wiphy_name(dev->wiphy), priv->bbp_type);
1047
1048 ADM8211_CSR_WRITE(SYNRF, 0);
1049
1050 /* Set RF CAL control source to MAC control */
1051 reg = ADM8211_CSR_READ(SYNCTL);
1052 reg |= ADM8211_SYNCTL_SELCAL;
1053 ADM8211_CSR_WRITE(SYNCTL, reg);
1054
1055 return 0;
1056 }
1057
1058 /* configures hw beacons/probe responses */
1059 static int adm8211_set_rate(struct ieee80211_hw *dev)
1060 {
1061 struct adm8211_priv *priv = dev->priv;
1062 u32 reg;
1063 int i = 0;
1064 u8 rate_buf[12] = {0};
1065
1066 /* write supported rates */
1067 if (priv->pdev->revision != ADM8211_REV_BA) {
1068 rate_buf[0] = ARRAY_SIZE(adm8211_rates);
1069 for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++)
1070 rate_buf[i + 1] = (adm8211_rates[i].bitrate / 5) | 0x80;
1071 } else {
1072 /* workaround for rev BA specific bug */
1073 rate_buf[0] = 0x04;
1074 rate_buf[1] = 0x82;
1075 rate_buf[2] = 0x04;
1076 rate_buf[3] = 0x0b;
1077 rate_buf[4] = 0x16;
1078 }
1079
1080 adm8211_write_sram_bytes(dev, ADM8211_SRAM_SUPP_RATE, rate_buf,
1081 ARRAY_SIZE(adm8211_rates) + 1);
1082
1083 reg = ADM8211_CSR_READ(PLCPHD) & 0x00FFFFFF; /* keep bits 0-23 */
1084 reg |= 1 << 15; /* short preamble */
1085 reg |= 110 << 24;
1086 ADM8211_CSR_WRITE(PLCPHD, reg);
1087
1088 /* MTMLT = 512 TU (max TX MSDU lifetime)
1089 * BCNTSIG = plcp_signal (beacon, probe resp, and atim TX rate)
1090 * SRTYLIM = 224 (short retry limit, TX header value is default) */
1091 ADM8211_CSR_WRITE(TXLMT, (512 << 16) | (110 << 8) | (224 << 0));
1092
1093 return 0;
1094 }
1095
1096 static void adm8211_hw_init(struct ieee80211_hw *dev)
1097 {
1098 struct adm8211_priv *priv = dev->priv;
1099 u32 reg;
1100 u8 cline;
1101
1102 reg = ADM8211_CSR_READ(PAR);
1103 reg |= ADM8211_PAR_MRLE | ADM8211_PAR_MRME;
1104 reg &= ~(ADM8211_PAR_BAR | ADM8211_PAR_CAL);
1105
1106 if (!pci_set_mwi(priv->pdev)) {
1107 reg |= 0x1 << 24;
1108 pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline);
1109
1110 switch (cline) {
1111 case 0x8: reg |= (0x1 << 14);
1112 break;
1113 case 0x16: reg |= (0x2 << 14);
1114 break;
1115 case 0x32: reg |= (0x3 << 14);
1116 break;
1117 default: reg |= (0x0 << 14);
1118 break;
1119 }
1120 }
1121
1122 ADM8211_CSR_WRITE(PAR, reg);
1123
1124 reg = ADM8211_CSR_READ(CSR_TEST1);
1125 reg &= ~(0xF << 28);
1126 reg |= (1 << 28) | (1 << 31);
1127 ADM8211_CSR_WRITE(CSR_TEST1, reg);
1128
1129 /* lose link after 4 lost beacons */
1130 reg = (0x04 << 21) | ADM8211_WCSR_TSFTWE | ADM8211_WCSR_LSOE;
1131 ADM8211_CSR_WRITE(WCSR, reg);
1132
1133 /* Disable APM, enable receive FIFO threshold, and set drain receive
1134 * threshold to store-and-forward */
1135 reg = ADM8211_CSR_READ(CMDR);
1136 reg &= ~(ADM8211_CMDR_APM | ADM8211_CMDR_DRT);
1137 reg |= ADM8211_CMDR_RTE | ADM8211_CMDR_DRT_SF;
1138 ADM8211_CSR_WRITE(CMDR, reg);
1139
1140 adm8211_set_rate(dev);
1141
1142 /* 4-bit values:
1143 * PWR1UP = 8 * 2 ms
1144 * PWR0PAPE = 8 us or 5 us
1145 * PWR1PAPE = 1 us or 3 us
1146 * PWR0TRSW = 5 us
1147 * PWR1TRSW = 12 us
1148 * PWR0PE2 = 13 us
1149 * PWR1PE2 = 1 us
1150 * PWR0TXPE = 8 or 6 */
1151 if (priv->pdev->revision < ADM8211_REV_CA)
1152 ADM8211_CSR_WRITE(TOFS2, 0x8815cd18);
1153 else
1154 ADM8211_CSR_WRITE(TOFS2, 0x8535cd16);
1155
1156 /* Enable store and forward for transmit */
1157 priv->nar = ADM8211_NAR_SF | ADM8211_NAR_PB;
1158 ADM8211_CSR_WRITE(NAR, priv->nar);
1159
1160 /* Reset RF */
1161 ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_RADIO);
1162 ADM8211_CSR_READ(SYNRF);
1163 msleep(10);
1164 ADM8211_CSR_WRITE(SYNRF, 0);
1165 ADM8211_CSR_READ(SYNRF);
1166 msleep(5);
1167
1168 /* Set CFP Max Duration to 0x10 TU */
1169 reg = ADM8211_CSR_READ(CFPP);
1170 reg &= ~(0xffff << 8);
1171 reg |= 0x0010 << 8;
1172 ADM8211_CSR_WRITE(CFPP, reg);
1173
1174 /* USCNT = 0x16 (number of system clocks, 22 MHz, in 1us
1175 * TUCNT = 0x3ff - Tu counter 1024 us */
1176 ADM8211_CSR_WRITE(TOFS0, (0x16 << 24) | 0x3ff);
1177
1178 /* SLOT=20 us, SIFS=110 cycles of 22 MHz (5 us),
1179 * DIFS=50 us, EIFS=100 us */
1180 if (priv->pdev->revision < ADM8211_REV_CA)
1181 ADM8211_CSR_WRITE(IFST, (20 << 23) | (110 << 15) |
1182 (50 << 9) | 100);
1183 else
1184 ADM8211_CSR_WRITE(IFST, (20 << 23) | (24 << 15) |
1185 (50 << 9) | 100);
1186
1187 /* PCNT = 1 (MAC idle time awake/sleep, unit S)
1188 * RMRD = 2346 * 8 + 1 us (max RX duration) */
1189 ADM8211_CSR_WRITE(RMD, (1 << 16) | 18769);
1190
1191 /* MART=65535 us, MIRT=256 us, TSFTOFST=0 us */
1192 ADM8211_CSR_WRITE(RSPT, 0xffffff00);
1193
1194 /* Initialize BBP (and SYN) */
1195 adm8211_hw_init_bbp(dev);
1196
1197 /* make sure interrupts are off */
1198 ADM8211_CSR_WRITE(IER, 0);
1199
1200 /* ACK interrupts */
1201 ADM8211_CSR_WRITE(STSR, ADM8211_CSR_READ(STSR));
1202
1203 /* Setup WEP (turns it off for now) */
1204 reg = ADM8211_CSR_READ(MACTEST);
1205 reg &= ~(7 << 20);
1206 ADM8211_CSR_WRITE(MACTEST, reg);
1207
1208 reg = ADM8211_CSR_READ(WEPCTL);
1209 reg &= ~ADM8211_WEPCTL_WEPENABLE;
1210 reg |= ADM8211_WEPCTL_WEPRXBYP;
1211 ADM8211_CSR_WRITE(WEPCTL, reg);
1212
1213 /* Clear the missed-packet counter. */
1214 ADM8211_CSR_READ(LPC);
1215 }
1216
1217 static int adm8211_hw_reset(struct ieee80211_hw *dev)
1218 {
1219 struct adm8211_priv *priv = dev->priv;
1220 u32 reg, tmp;
1221 int timeout = 100;
1222
1223 /* Power-on issue */
1224 /* TODO: check if this is necessary */
1225 ADM8211_CSR_WRITE(FRCTL, 0);
1226
1227 /* Reset the chip */
1228 tmp = ADM8211_CSR_READ(PAR);
1229 ADM8211_CSR_WRITE(PAR, ADM8211_PAR_SWR);
1230
1231 while ((ADM8211_CSR_READ(PAR) & ADM8211_PAR_SWR) && timeout--)
1232 msleep(50);
1233
1234 if (timeout <= 0)
1235 return -ETIMEDOUT;
1236
1237 ADM8211_CSR_WRITE(PAR, tmp);
1238
1239 if (priv->pdev->revision == ADM8211_REV_BA &&
1240 (priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
1241 priv->transceiver_type == ADM8211_RFMD2958)) {
1242 reg = ADM8211_CSR_READ(CSR_TEST1);
1243 reg |= (1 << 4) | (1 << 5);
1244 ADM8211_CSR_WRITE(CSR_TEST1, reg);
1245 } else if (priv->pdev->revision == ADM8211_REV_CA) {
1246 reg = ADM8211_CSR_READ(CSR_TEST1);
1247 reg &= ~((1 << 4) | (1 << 5));
1248 ADM8211_CSR_WRITE(CSR_TEST1, reg);
1249 }
1250
1251 ADM8211_CSR_WRITE(FRCTL, 0);
1252
1253 reg = ADM8211_CSR_READ(CSR_TEST0);
1254 reg |= ADM8211_CSR_TEST0_EPRLD; /* EEPROM Recall */
1255 ADM8211_CSR_WRITE(CSR_TEST0, reg);
1256
1257 adm8211_clear_sram(dev);
1258
1259 return 0;
1260 }
1261
1262 static u64 adm8211_get_tsft(struct ieee80211_hw *dev)
1263 {
1264 struct adm8211_priv *priv = dev->priv;
1265 u32 tsftl;
1266 u64 tsft;
1267
1268 tsftl = ADM8211_CSR_READ(TSFTL);
1269 tsft = ADM8211_CSR_READ(TSFTH);
1270 tsft <<= 32;
1271 tsft |= tsftl;
1272
1273 return tsft;
1274 }
1275
1276 static void adm8211_set_interval(struct ieee80211_hw *dev,
1277 unsigned short bi, unsigned short li)
1278 {
1279 struct adm8211_priv *priv = dev->priv;
1280 u32 reg;
1281
1282 /* BP (beacon interval) = data->beacon_interval
1283 * LI (listen interval) = data->listen_interval (in beacon intervals) */
1284 reg = (bi << 16) | li;
1285 ADM8211_CSR_WRITE(BPLI, reg);
1286 }
1287
1288 static void adm8211_set_bssid(struct ieee80211_hw *dev, const u8 *bssid)
1289 {
1290 struct adm8211_priv *priv = dev->priv;
1291 u32 reg;
1292
1293 ADM8211_CSR_WRITE(BSSID0, le32_to_cpu(*(__le32 *)bssid));
1294 reg = ADM8211_CSR_READ(ABDA1);
1295 reg &= 0x0000ffff;
1296 reg |= (bssid[4] << 16) | (bssid[5] << 24);
1297 ADM8211_CSR_WRITE(ABDA1, reg);
1298 }
1299
1300 static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
1301 {
1302 struct adm8211_priv *priv = dev->priv;
1303 struct ieee80211_conf *conf = &dev->conf;
1304 int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
1305
1306 if (channel != priv->channel) {
1307 priv->channel = channel;
1308 adm8211_rf_set_channel(dev, priv->channel);
1309 }
1310
1311 return 0;
1312 }
1313
1314 static void adm8211_bss_info_changed(struct ieee80211_hw *dev,
1315 struct ieee80211_vif *vif,
1316 struct ieee80211_bss_conf *conf,
1317 u32 changes)
1318 {
1319 struct adm8211_priv *priv = dev->priv;
1320
1321 if (!(changes & BSS_CHANGED_BSSID))
1322 return;
1323
1324 if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
1325 adm8211_set_bssid(dev, conf->bssid);
1326 memcpy(priv->bssid, conf->bssid, ETH_ALEN);
1327 }
1328 }
1329
1330 static void adm8211_configure_filter(struct ieee80211_hw *dev,
1331 unsigned int changed_flags,
1332 unsigned int *total_flags,
1333 int mc_count, struct dev_mc_list *mclist)
1334 {
1335 static const u8 bcast[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
1336 struct adm8211_priv *priv = dev->priv;
1337 unsigned int bit_nr, new_flags;
1338 u32 mc_filter[2];
1339 int i;
1340
1341 new_flags = 0;
1342
1343 if (*total_flags & FIF_PROMISC_IN_BSS) {
1344 new_flags |= FIF_PROMISC_IN_BSS;
1345 priv->nar |= ADM8211_NAR_PR;
1346 priv->nar &= ~ADM8211_NAR_MM;
1347 mc_filter[1] = mc_filter[0] = ~0;
1348 } else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32)) {
1349 new_flags |= FIF_ALLMULTI;
1350 priv->nar &= ~ADM8211_NAR_PR;
1351 priv->nar |= ADM8211_NAR_MM;
1352 mc_filter[1] = mc_filter[0] = ~0;
1353 } else {
1354 priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR);
1355 mc_filter[1] = mc_filter[0] = 0;
1356 for (i = 0; i < mc_count; i++) {
1357 if (!mclist)
1358 break;
1359 bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
1360
1361 bit_nr &= 0x3F;
1362 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
1363 mclist = mclist->next;
1364 }
1365 }
1366
1367 ADM8211_IDLE_RX();
1368
1369 ADM8211_CSR_WRITE(MAR0, mc_filter[0]);
1370 ADM8211_CSR_WRITE(MAR1, mc_filter[1]);
1371 ADM8211_CSR_READ(NAR);
1372
1373 if (priv->nar & ADM8211_NAR_PR)
1374 dev->flags |= IEEE80211_HW_RX_INCLUDES_FCS;
1375 else
1376 dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
1377
1378 if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
1379 adm8211_set_bssid(dev, bcast);
1380 else
1381 adm8211_set_bssid(dev, priv->bssid);
1382
1383 ADM8211_RESTORE();
1384
1385 *total_flags = new_flags;
1386 }
1387
1388 static int adm8211_add_interface(struct ieee80211_hw *dev,
1389 struct ieee80211_if_init_conf *conf)
1390 {
1391 struct adm8211_priv *priv = dev->priv;
1392 if (priv->mode != NL80211_IFTYPE_MONITOR)
1393 return -EOPNOTSUPP;
1394
1395 switch (conf->type) {
1396 case NL80211_IFTYPE_STATION:
1397 priv->mode = conf->type;
1398 break;
1399 default:
1400 return -EOPNOTSUPP;
1401 }
1402
1403 ADM8211_IDLE();
1404
1405 ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)conf->mac_addr));
1406 ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
1407
1408 adm8211_update_mode(dev);
1409
1410 ADM8211_RESTORE();
1411
1412 return 0;
1413 }
1414
1415 static void adm8211_remove_interface(struct ieee80211_hw *dev,
1416 struct ieee80211_if_init_conf *conf)
1417 {
1418 struct adm8211_priv *priv = dev->priv;
1419 priv->mode = NL80211_IFTYPE_MONITOR;
1420 }
1421
1422 static int adm8211_init_rings(struct ieee80211_hw *dev)
1423 {
1424 struct adm8211_priv *priv = dev->priv;
1425 struct adm8211_desc *desc = NULL;
1426 struct adm8211_rx_ring_info *rx_info;
1427 struct adm8211_tx_ring_info *tx_info;
1428 unsigned int i;
1429
1430 for (i = 0; i < priv->rx_ring_size; i++) {
1431 desc = &priv->rx_ring[i];
1432 desc->status = 0;
1433 desc->length = cpu_to_le32(RX_PKT_SIZE);
1434 priv->rx_buffers[i].skb = NULL;
1435 }
1436 /* Mark the end of RX ring; hw returns to base address after this
1437 * descriptor */
1438 desc->length |= cpu_to_le32(RDES1_CONTROL_RER);
1439
1440 for (i = 0; i < priv->rx_ring_size; i++) {
1441 desc = &priv->rx_ring[i];
1442 rx_info = &priv->rx_buffers[i];
1443
1444 rx_info->skb = dev_alloc_skb(RX_PKT_SIZE);
1445 if (rx_info->skb == NULL)
1446 break;
1447 rx_info->mapping = pci_map_single(priv->pdev,
1448 skb_tail_pointer(rx_info->skb),
1449 RX_PKT_SIZE,
1450 PCI_DMA_FROMDEVICE);
1451 desc->buffer1 = cpu_to_le32(rx_info->mapping);
1452 desc->status = cpu_to_le32(RDES0_STATUS_OWN | RDES0_STATUS_SQL);
1453 }
1454
1455 /* Setup TX ring. TX buffers descriptors will be filled in as needed */
1456 for (i = 0; i < priv->tx_ring_size; i++) {
1457 desc = &priv->tx_ring[i];
1458 tx_info = &priv->tx_buffers[i];
1459
1460 tx_info->skb = NULL;
1461 tx_info->mapping = 0;
1462 desc->status = 0;
1463 }
1464 desc->length = cpu_to_le32(TDES1_CONTROL_TER);
1465
1466 priv->cur_rx = priv->cur_tx = priv->dirty_tx = 0;
1467 ADM8211_CSR_WRITE(RDB, priv->rx_ring_dma);
1468 ADM8211_CSR_WRITE(TDBD, priv->tx_ring_dma);
1469
1470 return 0;
1471 }
1472
1473 static void adm8211_free_rings(struct ieee80211_hw *dev)
1474 {
1475 struct adm8211_priv *priv = dev->priv;
1476 unsigned int i;
1477
1478 for (i = 0; i < priv->rx_ring_size; i++) {
1479 if (!priv->rx_buffers[i].skb)
1480 continue;
1481
1482 pci_unmap_single(
1483 priv->pdev,
1484 priv->rx_buffers[i].mapping,
1485 RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
1486
1487 dev_kfree_skb(priv->rx_buffers[i].skb);
1488 }
1489
1490 for (i = 0; i < priv->tx_ring_size; i++) {
1491 if (!priv->tx_buffers[i].skb)
1492 continue;
1493
1494 pci_unmap_single(priv->pdev,
1495 priv->tx_buffers[i].mapping,
1496 priv->tx_buffers[i].skb->len,
1497 PCI_DMA_TODEVICE);
1498
1499 dev_kfree_skb(priv->tx_buffers[i].skb);
1500 }
1501 }
1502
1503 static int adm8211_start(struct ieee80211_hw *dev)
1504 {
1505 struct adm8211_priv *priv = dev->priv;
1506 int retval;
1507
1508 /* Power up MAC and RF chips */
1509 retval = adm8211_hw_reset(dev);
1510 if (retval) {
1511 printk(KERN_ERR "%s: hardware reset failed\n",
1512 wiphy_name(dev->wiphy));
1513 goto fail;
1514 }
1515
1516 retval = adm8211_init_rings(dev);
1517 if (retval) {
1518 printk(KERN_ERR "%s: failed to initialize rings\n",
1519 wiphy_name(dev->wiphy));
1520 goto fail;
1521 }
1522
1523 /* Init hardware */
1524 adm8211_hw_init(dev);
1525 adm8211_rf_set_channel(dev, priv->channel);
1526
1527 retval = request_irq(priv->pdev->irq, &adm8211_interrupt,
1528 IRQF_SHARED, "adm8211", dev);
1529 if (retval) {
1530 printk(KERN_ERR "%s: failed to register IRQ handler\n",
1531 wiphy_name(dev->wiphy));
1532 goto fail;
1533 }
1534
1535 ADM8211_CSR_WRITE(IER, ADM8211_IER_NIE | ADM8211_IER_AIE |
1536 ADM8211_IER_RCIE | ADM8211_IER_TCIE |
1537 ADM8211_IER_TDUIE | ADM8211_IER_GPTIE);
1538 priv->mode = NL80211_IFTYPE_MONITOR;
1539 adm8211_update_mode(dev);
1540 ADM8211_CSR_WRITE(RDR, 0);
1541
1542 adm8211_set_interval(dev, 100, 10);
1543 return 0;
1544
1545 fail:
1546 return retval;
1547 }
1548
1549 static void adm8211_stop(struct ieee80211_hw *dev)
1550 {
1551 struct adm8211_priv *priv = dev->priv;
1552
1553 priv->mode = NL80211_IFTYPE_UNSPECIFIED;
1554 priv->nar = 0;
1555 ADM8211_CSR_WRITE(NAR, 0);
1556 ADM8211_CSR_WRITE(IER, 0);
1557 ADM8211_CSR_READ(NAR);
1558
1559 free_irq(priv->pdev->irq, dev);
1560
1561 adm8211_free_rings(dev);
1562 }
1563
1564 static void adm8211_calc_durations(int *dur, int *plcp, size_t payload_len, int len,
1565 int plcp_signal, int short_preamble)
1566 {
1567 /* Alternative calculation from NetBSD: */
1568
1569 /* IEEE 802.11b durations for DSSS PHY in microseconds */
1570 #define IEEE80211_DUR_DS_LONG_PREAMBLE 144
1571 #define IEEE80211_DUR_DS_SHORT_PREAMBLE 72
1572 #define IEEE80211_DUR_DS_FAST_PLCPHDR 24
1573 #define IEEE80211_DUR_DS_SLOW_PLCPHDR 48
1574 #define IEEE80211_DUR_DS_SLOW_ACK 112
1575 #define IEEE80211_DUR_DS_FAST_ACK 56
1576 #define IEEE80211_DUR_DS_SLOW_CTS 112
1577 #define IEEE80211_DUR_DS_FAST_CTS 56
1578 #define IEEE80211_DUR_DS_SLOT 20
1579 #define IEEE80211_DUR_DS_SIFS 10
1580
1581 int remainder;
1582
1583 *dur = (80 * (24 + payload_len) + plcp_signal - 1)
1584 / plcp_signal;
1585
1586 if (plcp_signal <= PLCP_SIGNAL_2M)
1587 /* 1-2Mbps WLAN: send ACK/CTS at 1Mbps */
1588 *dur += 3 * (IEEE80211_DUR_DS_SIFS +
1589 IEEE80211_DUR_DS_SHORT_PREAMBLE +
1590 IEEE80211_DUR_DS_FAST_PLCPHDR) +
1591 IEEE80211_DUR_DS_SLOW_CTS + IEEE80211_DUR_DS_SLOW_ACK;
1592 else
1593 /* 5-11Mbps WLAN: send ACK/CTS at 2Mbps */
1594 *dur += 3 * (IEEE80211_DUR_DS_SIFS +
1595 IEEE80211_DUR_DS_SHORT_PREAMBLE +
1596 IEEE80211_DUR_DS_FAST_PLCPHDR) +
1597 IEEE80211_DUR_DS_FAST_CTS + IEEE80211_DUR_DS_FAST_ACK;
1598
1599 /* lengthen duration if long preamble */
1600 if (!short_preamble)
1601 *dur += 3 * (IEEE80211_DUR_DS_LONG_PREAMBLE -
1602 IEEE80211_DUR_DS_SHORT_PREAMBLE) +
1603 3 * (IEEE80211_DUR_DS_SLOW_PLCPHDR -
1604 IEEE80211_DUR_DS_FAST_PLCPHDR);
1605
1606
1607 *plcp = (80 * len) / plcp_signal;
1608 remainder = (80 * len) % plcp_signal;
1609 if (plcp_signal == PLCP_SIGNAL_11M &&
1610 remainder <= 30 && remainder > 0)
1611 *plcp = (*plcp | 0x8000) + 1;
1612 else if (remainder)
1613 (*plcp)++;
1614 }
1615
1616 /* Transmit skb w/adm8211_tx_hdr (802.11 header created by hardware) */
1617 static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb,
1618 u16 plcp_signal,
1619 size_t hdrlen)
1620 {
1621 struct adm8211_priv *priv = dev->priv;
1622 unsigned long flags;
1623 dma_addr_t mapping;
1624 unsigned int entry;
1625 u32 flag;
1626
1627 mapping = pci_map_single(priv->pdev, skb->data, skb->len,
1628 PCI_DMA_TODEVICE);
1629
1630 spin_lock_irqsave(&priv->lock, flags);
1631
1632 if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size / 2)
1633 flag = TDES1_CONTROL_IC | TDES1_CONTROL_LS | TDES1_CONTROL_FS;
1634 else
1635 flag = TDES1_CONTROL_LS | TDES1_CONTROL_FS;
1636
1637 if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size - 2)
1638 ieee80211_stop_queue(dev, 0);
1639
1640 entry = priv->cur_tx % priv->tx_ring_size;
1641
1642 priv->tx_buffers[entry].skb = skb;
1643 priv->tx_buffers[entry].mapping = mapping;
1644 priv->tx_buffers[entry].hdrlen = hdrlen;
1645 priv->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
1646
1647 if (entry == priv->tx_ring_size - 1)
1648 flag |= TDES1_CONTROL_TER;
1649 priv->tx_ring[entry].length = cpu_to_le32(flag | skb->len);
1650
1651 /* Set TX rate (SIGNAL field in PLCP PPDU format) */
1652 flag = TDES0_CONTROL_OWN | (plcp_signal << 20) | 8 /* ? */;
1653 priv->tx_ring[entry].status = cpu_to_le32(flag);
1654
1655 priv->cur_tx++;
1656
1657 spin_unlock_irqrestore(&priv->lock, flags);
1658
1659 /* Trigger transmit poll */
1660 ADM8211_CSR_WRITE(TDR, 0);
1661 }
1662
1663 /* Put adm8211_tx_hdr on skb and transmit */
1664 static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
1665 {
1666 struct adm8211_tx_hdr *txhdr;
1667 size_t payload_len, hdrlen;
1668 int plcp, dur, len, plcp_signal, short_preamble;
1669 struct ieee80211_hdr *hdr;
1670 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1671 struct ieee80211_rate *txrate = ieee80211_get_tx_rate(dev, info);
1672 u8 rc_flags;
1673
1674 rc_flags = info->control.rates[0].flags;
1675 short_preamble = !!(rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
1676 plcp_signal = txrate->bitrate;
1677
1678 hdr = (struct ieee80211_hdr *)skb->data;
1679 hdrlen = ieee80211_hdrlen(hdr->frame_control);
1680 memcpy(skb->cb, skb->data, hdrlen);
1681 hdr = (struct ieee80211_hdr *)skb->cb;
1682 skb_pull(skb, hdrlen);
1683 payload_len = skb->len;
1684
1685 txhdr = (struct adm8211_tx_hdr *) skb_push(skb, sizeof(*txhdr));
1686 memset(txhdr, 0, sizeof(*txhdr));
1687 memcpy(txhdr->da, ieee80211_get_DA(hdr), ETH_ALEN);
1688 txhdr->signal = plcp_signal;
1689 txhdr->frame_body_size = cpu_to_le16(payload_len);
1690 txhdr->frame_control = hdr->frame_control;
1691
1692 len = hdrlen + payload_len + FCS_LEN;
1693
1694 txhdr->frag = cpu_to_le16(0x0FFF);
1695 adm8211_calc_durations(&dur, &plcp, payload_len,
1696 len, plcp_signal, short_preamble);
1697 txhdr->plcp_frag_head_len = cpu_to_le16(plcp);
1698 txhdr->plcp_frag_tail_len = cpu_to_le16(plcp);
1699 txhdr->dur_frag_head = cpu_to_le16(dur);
1700 txhdr->dur_frag_tail = cpu_to_le16(dur);
1701
1702 txhdr->header_control = cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER);
1703
1704 if (short_preamble)
1705 txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE);
1706
1707 if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
1708 txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS);
1709
1710 txhdr->retry_limit = info->control.rates[0].count;
1711
1712 adm8211_tx_raw(dev, skb, plcp_signal, hdrlen);
1713
1714 return NETDEV_TX_OK;
1715 }
1716
1717 static int adm8211_alloc_rings(struct ieee80211_hw *dev)
1718 {
1719 struct adm8211_priv *priv = dev->priv;
1720 unsigned int ring_size;
1721
1722 priv->rx_buffers = kmalloc(sizeof(*priv->rx_buffers) * priv->rx_ring_size +
1723 sizeof(*priv->tx_buffers) * priv->tx_ring_size, GFP_KERNEL);
1724 if (!priv->rx_buffers)
1725 return -ENOMEM;
1726
1727 priv->tx_buffers = (void *)priv->rx_buffers +
1728 sizeof(*priv->rx_buffers) * priv->rx_ring_size;
1729
1730 /* Allocate TX/RX descriptors */
1731 ring_size = sizeof(struct adm8211_desc) * priv->rx_ring_size +
1732 sizeof(struct adm8211_desc) * priv->tx_ring_size;
1733 priv->rx_ring = pci_alloc_consistent(priv->pdev, ring_size,
1734 &priv->rx_ring_dma);
1735
1736 if (!priv->rx_ring) {
1737 kfree(priv->rx_buffers);
1738 priv->rx_buffers = NULL;
1739 priv->tx_buffers = NULL;
1740 return -ENOMEM;
1741 }
1742
1743 priv->tx_ring = (struct adm8211_desc *)(priv->rx_ring +
1744 priv->rx_ring_size);
1745 priv->tx_ring_dma = priv->rx_ring_dma +
1746 sizeof(struct adm8211_desc) * priv->rx_ring_size;
1747
1748 return 0;
1749 }
1750
1751 static const struct ieee80211_ops adm8211_ops = {
1752 .tx = adm8211_tx,
1753 .start = adm8211_start,
1754 .stop = adm8211_stop,
1755 .add_interface = adm8211_add_interface,
1756 .remove_interface = adm8211_remove_interface,
1757 .config = adm8211_config,
1758 .bss_info_changed = adm8211_bss_info_changed,
1759 .configure_filter = adm8211_configure_filter,
1760 .get_stats = adm8211_get_stats,
1761 .get_tx_stats = adm8211_get_tx_stats,
1762 .get_tsf = adm8211_get_tsft
1763 };
1764
1765 static int __devinit adm8211_probe(struct pci_dev *pdev,
1766 const struct pci_device_id *id)
1767 {
1768 struct ieee80211_hw *dev;
1769 struct adm8211_priv *priv;
1770 unsigned long mem_addr, mem_len;
1771 unsigned int io_addr, io_len;
1772 int err;
1773 u32 reg;
1774 u8 perm_addr[ETH_ALEN];
1775
1776 err = pci_enable_device(pdev);
1777 if (err) {
1778 printk(KERN_ERR "%s (adm8211): Cannot enable new PCI device\n",
1779 pci_name(pdev));
1780 return err;
1781 }
1782
1783 io_addr = pci_resource_start(pdev, 0);
1784 io_len = pci_resource_len(pdev, 0);
1785 mem_addr = pci_resource_start(pdev, 1);
1786 mem_len = pci_resource_len(pdev, 1);
1787 if (io_len < 256 || mem_len < 1024) {
1788 printk(KERN_ERR "%s (adm8211): Too short PCI resources\n",
1789 pci_name(pdev));
1790 goto err_disable_pdev;
1791 }
1792
1793
1794 /* check signature */
1795 pci_read_config_dword(pdev, 0x80 /* CR32 */, &reg);
1796 if (reg != ADM8211_SIG1 && reg != ADM8211_SIG2) {
1797 printk(KERN_ERR "%s (adm8211): Invalid signature (0x%x)\n",
1798 pci_name(pdev), reg);
1799 goto err_disable_pdev;
1800 }
1801
1802 err = pci_request_regions(pdev, "adm8211");
1803 if (err) {
1804 printk(KERN_ERR "%s (adm8211): Cannot obtain PCI resources\n",
1805 pci_name(pdev));
1806 return err; /* someone else grabbed it? don't disable it */
1807 }
1808
1809 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
1810 pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
1811 printk(KERN_ERR "%s (adm8211): No suitable DMA available\n",
1812 pci_name(pdev));
1813 goto err_free_reg;
1814 }
1815
1816 pci_set_master(pdev);
1817
1818 dev = ieee80211_alloc_hw(sizeof(*priv), &adm8211_ops);
1819 if (!dev) {
1820 printk(KERN_ERR "%s (adm8211): ieee80211 alloc failed\n",
1821 pci_name(pdev));
1822 err = -ENOMEM;
1823 goto err_free_reg;
1824 }
1825 priv = dev->priv;
1826 priv->pdev = pdev;
1827
1828 spin_lock_init(&priv->lock);
1829
1830 SET_IEEE80211_DEV(dev, &pdev->dev);
1831
1832 pci_set_drvdata(pdev, dev);
1833
1834 priv->map = pci_iomap(pdev, 1, mem_len);
1835 if (!priv->map)
1836 priv->map = pci_iomap(pdev, 0, io_len);
1837
1838 if (!priv->map) {
1839 printk(KERN_ERR "%s (adm8211): Cannot map device memory\n",
1840 pci_name(pdev));
1841 goto err_free_dev;
1842 }
1843
1844 priv->rx_ring_size = rx_ring_size;
1845 priv->tx_ring_size = tx_ring_size;
1846
1847 if (adm8211_alloc_rings(dev)) {
1848 printk(KERN_ERR "%s (adm8211): Cannot allocate TX/RX ring\n",
1849 pci_name(pdev));
1850 goto err_iounmap;
1851 }
1852
1853 *(__le32 *)perm_addr = cpu_to_le32(ADM8211_CSR_READ(PAR0));
1854 *(__le16 *)&perm_addr[4] =
1855 cpu_to_le16(ADM8211_CSR_READ(PAR1) & 0xFFFF);
1856
1857 if (!is_valid_ether_addr(perm_addr)) {
1858 printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n",
1859 pci_name(pdev));
1860 random_ether_addr(perm_addr);
1861 }
1862 SET_IEEE80211_PERM_ADDR(dev, perm_addr);
1863
1864 dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
1865 /* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
1866 dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
1867 dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
1868
1869 dev->channel_change_time = 1000;
1870 dev->max_signal = 100; /* FIXME: find better value */
1871
1872 dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
1873
1874 priv->retry_limit = 3;
1875 priv->ant_power = 0x40;
1876 priv->tx_power = 0x40;
1877 priv->lpf_cutoff = 0xFF;
1878 priv->lnags_threshold = 0xFF;
1879 priv->mode = NL80211_IFTYPE_UNSPECIFIED;
1880
1881 /* Power-on issue. EEPROM won't read correctly without */
1882 if (pdev->revision >= ADM8211_REV_BA) {
1883 ADM8211_CSR_WRITE(FRCTL, 0);
1884 ADM8211_CSR_READ(FRCTL);
1885 ADM8211_CSR_WRITE(FRCTL, 1);
1886 ADM8211_CSR_READ(FRCTL);
1887 msleep(100);
1888 }
1889
1890 err = adm8211_read_eeprom(dev);
1891 if (err) {
1892 printk(KERN_ERR "%s (adm8211): Can't alloc eeprom buffer\n",
1893 pci_name(pdev));
1894 goto err_free_desc;
1895 }
1896
1897 priv->channel = 1;
1898
1899 dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
1900
1901 err = ieee80211_register_hw(dev);
1902 if (err) {
1903 printk(KERN_ERR "%s (adm8211): Cannot register device\n",
1904 pci_name(pdev));
1905 goto err_free_desc;
1906 }
1907
1908 printk(KERN_INFO "%s: hwaddr %pM, Rev 0x%02x\n",
1909 wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
1910 pdev->revision);
1911
1912 return 0;
1913
1914 err_free_desc:
1915 pci_free_consistent(pdev,
1916 sizeof(struct adm8211_desc) * priv->rx_ring_size +
1917 sizeof(struct adm8211_desc) * priv->tx_ring_size,
1918 priv->rx_ring, priv->rx_ring_dma);
1919 kfree(priv->rx_buffers);
1920
1921 err_iounmap:
1922 pci_iounmap(pdev, priv->map);
1923
1924 err_free_dev:
1925 pci_set_drvdata(pdev, NULL);
1926 ieee80211_free_hw(dev);
1927
1928 err_free_reg:
1929 pci_release_regions(pdev);
1930
1931 err_disable_pdev:
1932 pci_disable_device(pdev);
1933 return err;
1934 }
1935
1936
1937 static void __devexit adm8211_remove(struct pci_dev *pdev)
1938 {
1939 struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1940 struct adm8211_priv *priv;
1941
1942 if (!dev)
1943 return;
1944
1945 ieee80211_unregister_hw(dev);
1946
1947 priv = dev->priv;
1948
1949 pci_free_consistent(pdev,
1950 sizeof(struct adm8211_desc) * priv->rx_ring_size +
1951 sizeof(struct adm8211_desc) * priv->tx_ring_size,
1952 priv->rx_ring, priv->rx_ring_dma);
1953
1954 kfree(priv->rx_buffers);
1955 kfree(priv->eeprom);
1956 pci_iounmap(pdev, priv->map);
1957 pci_release_regions(pdev);
1958 pci_disable_device(pdev);
1959 ieee80211_free_hw(dev);
1960 }
1961
1962
1963 #ifdef CONFIG_PM
1964 static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state)
1965 {
1966 struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1967 struct adm8211_priv *priv = dev->priv;
1968
1969 if (priv->mode != NL80211_IFTYPE_UNSPECIFIED) {
1970 ieee80211_stop_queues(dev);
1971 adm8211_stop(dev);
1972 }
1973
1974 pci_save_state(pdev);
1975 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1976 return 0;
1977 }
1978
1979 static int adm8211_resume(struct pci_dev *pdev)
1980 {
1981 struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1982 struct adm8211_priv *priv = dev->priv;
1983
1984 pci_set_power_state(pdev, PCI_D0);
1985 pci_restore_state(pdev);
1986
1987 if (priv->mode != NL80211_IFTYPE_UNSPECIFIED) {
1988 adm8211_start(dev);
1989 ieee80211_wake_queues(dev);
1990 }
1991
1992 return 0;
1993 }
1994 #endif /* CONFIG_PM */
1995
1996
1997 MODULE_DEVICE_TABLE(pci, adm8211_pci_id_table);
1998
1999 /* TODO: implement enable_wake */
2000 static struct pci_driver adm8211_driver = {
2001 .name = "adm8211",
2002 .id_table = adm8211_pci_id_table,
2003 .probe = adm8211_probe,
2004 .remove = __devexit_p(adm8211_remove),
2005 #ifdef CONFIG_PM
2006 .suspend = adm8211_suspend,
2007 .resume = adm8211_resume,
2008 #endif /* CONFIG_PM */
2009 };
2010
2011
2012
2013 static int __init adm8211_init(void)
2014 {
2015 return pci_register_driver(&adm8211_driver);
2016 }
2017
2018
2019 static void __exit adm8211_exit(void)
2020 {
2021 pci_unregister_driver(&adm8211_driver);
2022 }
2023
2024
2025 module_init(adm8211_init);
2026 module_exit(adm8211_exit);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree