drivers/usb/otg/msm_otg.c

   1 /* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
   2  *
   3  * This program is free software; you can redistribute it and/or modify
   4  * it under the terms of the GNU General Public License version 2 and
   5  * only version 2 as published by the Free Software Foundation.
   6  *
   7  * This program is distributed in the hope that it will be useful,
   8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
   9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  10  * GNU General Public License for more details.
  11  *
  12  * You should have received a copy of the GNU General Public License
  13  * along with this program; if not, write to the Free Software
  14  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  15  * 02110-1301, USA.
  16  *
  17  */
  18
  19 #include <linux/module.h>
  20 #include <linux/device.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/clk.h>
  23 #include <linux/slab.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/err.h>
  26 #include <linux/delay.h>
  27 #include <linux/io.h>
  28 #include <linux/ioport.h>
  29 #include <linux/uaccess.h>
  30 #include <linux/debugfs.h>
  31 #include <linux/seq_file.h>
  32 #include <linux/pm_runtime.h>
  33
  34 #include <linux/usb.h>
  35 #include <linux/usb/otg.h>
  36 #include <linux/usb/ulpi.h>
  37 #include <linux/usb/gadget.h>
  38 #include <linux/usb/hcd.h>
  39 #include <linux/usb/msm_hsusb.h>
  40 #include <linux/usb/msm_hsusb_hw.h>
  41
  42 #include <mach/clk.h>
  43
  44 #define MSM_USB_BASE    (motg->regs)
  45 #define DRIVER_NAME     "msm_otg"
  46
  47 #define ULPI_IO_TIMEOUT_USEC    (10 * 1000)
  48 static int ulpi_read(struct otg_transceiver *otg, u32 reg)
  49 {
  50         struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
  51         int cnt = 0;
  52
  53         /* initiate read operation */
  54         writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
  55                USB_ULPI_VIEWPORT);
  56
  57         /* wait for completion */
  58         while (cnt < ULPI_IO_TIMEOUT_USEC) {
  59                 if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
  60                         break;
  61                 udelay(1);
  62                 cnt++;
  63         }
  64
  65         if (cnt >= ULPI_IO_TIMEOUT_USEC) {
  66                 dev_err(otg->dev, "ulpi_read: timeout %08x\n",
  67                         readl(USB_ULPI_VIEWPORT));
  68                 return -ETIMEDOUT;
  69         }
  70         return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
  71 }
  72
  73 static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
  74 {
  75         struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
  76         int cnt = 0;
  77
  78         /* initiate write operation */
  79         writel(ULPI_RUN | ULPI_WRITE |
  80                ULPI_ADDR(reg) | ULPI_DATA(val),
  81                USB_ULPI_VIEWPORT);
  82
  83         /* wait for completion */
  84         while (cnt < ULPI_IO_TIMEOUT_USEC) {
  85                 if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
  86                         break;
  87                 udelay(1);
  88                 cnt++;
  89         }
  90
  91         if (cnt >= ULPI_IO_TIMEOUT_USEC) {
  92                 dev_err(otg->dev, "ulpi_write: timeout\n");
  93                 return -ETIMEDOUT;
  94         }
  95         return 0;
  96 }
  97
  98 static struct otg_io_access_ops msm_otg_io_ops = {
  99         .read = ulpi_read,
 100         .write = ulpi_write,
 101 };
 102
 103 static void ulpi_init(struct msm_otg *motg)
 104 {
 105         struct msm_otg_platform_data *pdata = motg->pdata;
 106         int *seq = pdata->phy_init_seq;
 107
 108         if (!seq)
 109                 return;
 110
 111         while (seq[0] >= 0) {
 112                 dev_vdbg(motg->otg.dev, "ulpi: write 0x%02x to 0x%02x\n",
 113                                 seq[0], seq[1]);
 114                 ulpi_write(&motg->otg, seq[0], seq[1]);
 115                 seq += 2;
 116         }
 117 }
 118
 119 static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
 120 {
 121         int ret;
 122
 123         if (assert) {
 124                 ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
 125                 if (ret)
 126                         dev_err(motg->otg.dev, "usb hs_clk assert failed\n");
 127         } else {
 128                 ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
 129                 if (ret)
 130                         dev_err(motg->otg.dev, "usb hs_clk deassert failed\n");
 131         }
 132         return ret;
 133 }
 134
 135 static int msm_otg_phy_clk_reset(struct msm_otg *motg)
 136 {
 137         int ret;
 138
 139         ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
 140         if (ret) {
 141                 dev_err(motg->otg.dev, "usb phy clk assert failed\n");
 142                 return ret;
 143         }
 144         usleep_range(10000, 12000);
 145         ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
 146         if (ret)
 147                 dev_err(motg->otg.dev, "usb phy clk deassert failed\n");
 148         return ret;
 149 }
 150
 151 static int msm_otg_phy_reset(struct msm_otg *motg)
 152 {
 153         u32 val;
 154         int ret;
 155         int retries;
 156
 157         ret = msm_otg_link_clk_reset(motg, 1);
 158         if (ret)
 159                 return ret;
 160         ret = msm_otg_phy_clk_reset(motg);
 161         if (ret)
 162                 return ret;
 163         ret = msm_otg_link_clk_reset(motg, 0);
 164         if (ret)
 165                 return ret;
 166
 167         val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
 168         writel(val | PORTSC_PTS_ULPI, USB_PORTSC);
 169
 170         for (retries = 3; retries > 0; retries--) {
 171                 ret = ulpi_write(&motg->otg, ULPI_FUNC_CTRL_SUSPENDM,
 172                                 ULPI_CLR(ULPI_FUNC_CTRL));
 173                 if (!ret)
 174                         break;
 175                 ret = msm_otg_phy_clk_reset(motg);
 176                 if (ret)
 177                         return ret;
 178         }
 179         if (!retries)
 180                 return -ETIMEDOUT;
 181
 182         /* This reset calibrates the phy, if the above write succeeded */
 183         ret = msm_otg_phy_clk_reset(motg);
 184         if (ret)
 185                 return ret;
 186
 187         for (retries = 3; retries > 0; retries--) {
 188                 ret = ulpi_read(&motg->otg, ULPI_DEBUG);
 189                 if (ret != -ETIMEDOUT)
 190                         break;
 191                 ret = msm_otg_phy_clk_reset(motg);
 192                 if (ret)
 193                         return ret;
 194         }
 195         if (!retries)
 196                 return -ETIMEDOUT;
 197
 198         dev_info(motg->otg.dev, "phy_reset: success\n");
 199         return 0;
 200 }
 201
 202 #define LINK_RESET_TIMEOUT_USEC         (250 * 1000)
 203 static int msm_otg_reset(struct otg_transceiver *otg)
 204 {
 205         struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
 206         struct msm_otg_platform_data *pdata = motg->pdata;
 207         int cnt = 0;
 208         int ret;
 209         u32 val = 0;
 210         u32 ulpi_val = 0;
 211
 212         ret = msm_otg_phy_reset(motg);
 213         if (ret) {
 214                 dev_err(otg->dev, "phy_reset failed\n");
 215                 return ret;
 216         }
 217
 218         ulpi_init(motg);
 219
 220         writel(USBCMD_RESET, USB_USBCMD);
 221         while (cnt < LINK_RESET_TIMEOUT_USEC) {
 222                 if (!(readl(USB_USBCMD) & USBCMD_RESET))
 223                         break;
 224                 udelay(1);
 225                 cnt++;
 226         }
 227         if (cnt >= LINK_RESET_TIMEOUT_USEC)
 228                 return -ETIMEDOUT;
 229
 230         /* select ULPI phy */
 231         writel(0x80000000, USB_PORTSC);
 232
 233         msleep(100);
 234
 235         writel(0x0, USB_AHBBURST);
 236         writel(0x00, USB_AHBMODE);
 237
 238         if (pdata->otg_control == OTG_PHY_CONTROL) {
 239                 val = readl(USB_OTGSC);
 240                 if (pdata->mode == USB_OTG) {
 241                         ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
 242                         val |= OTGSC_IDIE | OTGSC_BSVIE;
 243                 } else if (pdata->mode == USB_PERIPHERAL) {
 244                         ulpi_val = ULPI_INT_SESS_VALID;
 245                         val |= OTGSC_BSVIE;
 246                 }
 247                 writel(val, USB_OTGSC);
 248                 ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_RISE);
 249                 ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_FALL);
 250         }
 251
 252         return 0;
 253 }
 254
 255 #define PHY_SUSPEND_TIMEOUT_USEC        (500 * 1000)
 256 #define PHY_RESUME_TIMEOUT_USEC (100 * 1000)
 257
 258 #ifdef CONFIG_PM_SLEEP
 259 static int msm_otg_suspend(struct msm_otg *motg)
 260 {
 261         struct otg_transceiver *otg = &motg->otg;
 262         struct usb_bus *bus = otg->host;
 263         struct msm_otg_platform_data *pdata = motg->pdata;
 264         int cnt = 0;
 265
 266         if (atomic_read(&motg->in_lpm))
 267                 return 0;
 268
 269         disable_irq(motg->irq);
 270         /*
 271          * Interrupt Latch Register auto-clear feature is not present
 272          * in all PHY versions. Latch register is clear on read type.
 273          * Clear latch register to avoid spurious wakeup from
 274          * low power mode (LPM).
 275          */
 276         ulpi_read(otg, 0x14);
 277
 278         /*
 279          * PHY comparators are disabled when PHY enters into low power
 280          * mode (LPM). Keep PHY comparators ON in LPM only when we expect
 281          * VBUS/Id notifications from USB PHY. Otherwise turn off USB
 282          * PHY comparators. This save significant amount of power.
 283          */
 284         if (pdata->otg_control == OTG_PHY_CONTROL)
 285                 ulpi_write(otg, 0x01, 0x30);
 286
 287         /*
 288          * PLL is not turned off when PHY enters into low power mode (LPM).
 289          * Disable PLL for maximum power savings.
 290          */
 291         ulpi_write(otg, 0x08, 0x09);
 292
 293         /*
 294          * PHY may take some time or even fail to enter into low power
 295          * mode (LPM). Hence poll for 500 msec and reset the PHY and link
 296          * in failure case.
 297          */
 298         writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
 299         while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
 300                 if (readl(USB_PORTSC) & PORTSC_PHCD)
 301                         break;
 302                 udelay(1);
 303                 cnt++;
 304         }
 305
 306         if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
 307                 dev_err(otg->dev, "Unable to suspend PHY\n");
 308                 msm_otg_reset(otg);
 309                 enable_irq(motg->irq);
 310                 return -ETIMEDOUT;
 311         }
 312
 313         /*
 314          * PHY has capability to generate interrupt asynchronously in low
 315          * power mode (LPM). This interrupt is level triggered. So USB IRQ
 316          * line must be disabled till async interrupt enable bit is cleared
 317          * in USBCMD register. Assert STP (ULPI interface STOP signal) to
 318          * block data communication from PHY.
 319          */
 320         writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
 321
 322         clk_disable(motg->pclk);
 323         clk_disable(motg->clk);
 324         if (motg->core_clk)
 325                 clk_disable(motg->core_clk);
 326
 327         if (device_may_wakeup(otg->dev))
 328                 enable_irq_wake(motg->irq);
 329         if (bus)
 330                 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
 331
 332         atomic_set(&motg->in_lpm, 1);
 333         enable_irq(motg->irq);
 334
 335         dev_info(otg->dev, "USB in low power mode\n");
 336
 337         return 0;
 338 }
 339
 340 static int msm_otg_resume(struct msm_otg *motg)
 341 {
 342         struct otg_transceiver *otg = &motg->otg;
 343         struct usb_bus *bus = otg->host;
 344         int cnt = 0;
 345         unsigned temp;
 346
 347         if (!atomic_read(&motg->in_lpm))
 348                 return 0;
 349
 350         clk_enable(motg->pclk);
 351         clk_enable(motg->clk);
 352         if (motg->core_clk)
 353                 clk_enable(motg->core_clk);
 354
 355         temp = readl(USB_USBCMD);
 356         temp &= ~ASYNC_INTR_CTRL;
 357         temp &= ~ULPI_STP_CTRL;
 358         writel(temp, USB_USBCMD);
 359
 360         /*
 361          * PHY comes out of low power mode (LPM) in case of wakeup
 362          * from asynchronous interrupt.
 363          */
 364         if (!(readl(USB_PORTSC) & PORTSC_PHCD))
 365                 goto skip_phy_resume;
 366
 367         writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
 368         while (cnt < PHY_RESUME_TIMEOUT_USEC) {
 369                 if (!(readl(USB_PORTSC) & PORTSC_PHCD))
 370                         break;
 371                 udelay(1);
 372                 cnt++;
 373         }
 374
 375         if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
 376                 /*
 377                  * This is a fatal error. Reset the link and
 378                  * PHY. USB state can not be restored. Re-insertion
 379                  * of USB cable is the only way to get USB working.
 380                  */
 381                 dev_err(otg->dev, "Unable to resume USB."
 382                                 "Re-plugin the cable\n");
 383                 msm_otg_reset(otg);
 384         }
 385
 386 skip_phy_resume:
 387         if (device_may_wakeup(otg->dev))
 388                 disable_irq_wake(motg->irq);
 389         if (bus)
 390                 set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
 391
 392         atomic_set(&motg->in_lpm, 0);
 393
 394         if (motg->async_int) {
 395                 motg->async_int = 0;
 396                 pm_runtime_put(otg->dev);
 397                 enable_irq(motg->irq);
 398         }
 399
 400         dev_info(otg->dev, "USB exited from low power mode\n");
 401
 402         return 0;
 403 }
 404 #endif
 405
 406 static void msm_otg_start_host(struct otg_transceiver *otg, int on)
 407 {
 408         struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
 409         struct msm_otg_platform_data *pdata = motg->pdata;
 410         struct usb_hcd *hcd;
 411
 412         if (!otg->host)
 413                 return;
 414
 415         hcd = bus_to_hcd(otg->host);
 416
 417         if (on) {
 418                 dev_dbg(otg->dev, "host on\n");
 419
 420                 if (pdata->vbus_power)
 421                         pdata->vbus_power(1);
 422                 /*
 423                  * Some boards have a switch cotrolled by gpio
 424                  * to enable/disable internal HUB. Enable internal
 425                  * HUB before kicking the host.
 426                  */
 427                 if (pdata->setup_gpio)
 428                         pdata->setup_gpio(OTG_STATE_A_HOST);
 429 #ifdef CONFIG_USB
 430                 usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
 431 #endif
 432         } else {
 433                 dev_dbg(otg->dev, "host off\n");
 434
 435 #ifdef CONFIG_USB
 436                 usb_remove_hcd(hcd);
 437 #endif
 438                 if (pdata->setup_gpio)
 439                         pdata->setup_gpio(OTG_STATE_UNDEFINED);
 440                 if (pdata->vbus_power)
 441                         pdata->vbus_power(0);
 442         }
 443 }
 444
 445 static int msm_otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
 446 {
 447         struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
 448         struct usb_hcd *hcd;
 449
 450         /*
 451          * Fail host registration if this board can support
 452          * only peripheral configuration.
 453          */
 454         if (motg->pdata->mode == USB_PERIPHERAL) {
 455                 dev_info(otg->dev, "Host mode is not supported\n");
 456                 return -ENODEV;
 457         }
 458
 459         if (!host) {
 460                 if (otg->state == OTG_STATE_A_HOST) {
 461                         pm_runtime_get_sync(otg->dev);
 462                         msm_otg_start_host(otg, 0);
 463                         otg->host = NULL;
 464                         otg->state = OTG_STATE_UNDEFINED;
 465                         schedule_work(&motg->sm_work);
 466                 } else {
 467                         otg->host = NULL;
 468                 }
 469
 470                 return 0;
 471         }
 472
 473         hcd = bus_to_hcd(host);
 474         hcd->power_budget = motg->pdata->power_budget;
 475
 476         otg->host = host;
 477         dev_dbg(otg->dev, "host driver registered w/ tranceiver\n");
 478
 479         /*
 480          * Kick the state machine work, if peripheral is not supported
 481          * or peripheral is already registered with us.
 482          */
 483         if (motg->pdata->mode == USB_HOST || otg->gadget) {
 484                 pm_runtime_get_sync(otg->dev);
 485                 schedule_work(&motg->sm_work);
 486         }
 487
 488         return 0;
 489 }
 490
 491 static void msm_otg_start_peripheral(struct otg_transceiver *otg, int on)
 492 {
 493         struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
 494         struct msm_otg_platform_data *pdata = motg->pdata;
 495
 496         if (!otg->gadget)
 497                 return;
 498
 499         if (on) {
 500                 dev_dbg(otg->dev, "gadget on\n");
 501                 /*
 502                  * Some boards have a switch cotrolled by gpio
 503                  * to enable/disable internal HUB. Disable internal
 504                  * HUB before kicking the gadget.
 505                  */
 506                 if (pdata->setup_gpio)
 507                         pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
 508                 usb_gadget_vbus_connect(otg->gadget);
 509         } else {
 510                 dev_dbg(otg->dev, "gadget off\n");
 511                 usb_gadget_vbus_disconnect(otg->gadget);
 512                 if (pdata->setup_gpio)
 513                         pdata->setup_gpio(OTG_STATE_UNDEFINED);
 514         }
 515
 516 }
 517
 518 static int msm_otg_set_peripheral(struct otg_transceiver *otg,
 519                         struct usb_gadget *gadget)
 520 {
 521         struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
 522
 523         /*
 524          * Fail peripheral registration if this board can support
 525          * only host configuration.
 526          */
 527         if (motg->pdata->mode == USB_HOST) {
 528                 dev_info(otg->dev, "Peripheral mode is not supported\n");
 529                 return -ENODEV;
 530         }
 531
 532         if (!gadget) {
 533                 if (otg->state == OTG_STATE_B_PERIPHERAL) {
 534                         pm_runtime_get_sync(otg->dev);
 535                         msm_otg_start_peripheral(otg, 0);
 536                         otg->gadget = NULL;
 537                         otg->state = OTG_STATE_UNDEFINED;
 538                         schedule_work(&motg->sm_work);
 539                 } else {
 540                         otg->gadget = NULL;
 541                 }
 542
 543                 return 0;
 544         }
 545         otg->gadget = gadget;
 546         dev_dbg(otg->dev, "peripheral driver registered w/ tranceiver\n");
 547
 548         /*
 549          * Kick the state machine work, if host is not supported
 550          * or host is already registered with us.
 551          */
 552         if (motg->pdata->mode == USB_PERIPHERAL || otg->host) {
 553                 pm_runtime_get_sync(otg->dev);
 554                 schedule_work(&motg->sm_work);
 555         }
 556
 557         return 0;
 558 }
 559
 560 /*
 561  * We support OTG, Peripheral only and Host only configurations. In case
 562  * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
 563  * via Id pin status or user request (debugfs). Id/BSV interrupts are not
 564  * enabled when switch is controlled by user and default mode is supplied
 565  * by board file, which can be changed by userspace later.
 566  */
 567 static void msm_otg_init_sm(struct msm_otg *motg)
 568 {
 569         struct msm_otg_platform_data *pdata = motg->pdata;
 570         u32 otgsc = readl(USB_OTGSC);
 571
 572         switch (pdata->mode) {
 573         case USB_OTG:
 574                 if (pdata->otg_control == OTG_PHY_CONTROL) {
 575                         if (otgsc & OTGSC_ID)
 576                                 set_bit(ID, &motg->inputs);
 577                         else
 578                                 clear_bit(ID, &motg->inputs);
 579
 580                         if (otgsc & OTGSC_BSV)
 581                                 set_bit(B_SESS_VLD, &motg->inputs);
 582                         else
 583                                 clear_bit(B_SESS_VLD, &motg->inputs);
 584                 } else if (pdata->otg_control == OTG_USER_CONTROL) {
 585                         if (pdata->default_mode == USB_HOST) {
 586                                 clear_bit(ID, &motg->inputs);
 587                         } else if (pdata->default_mode == USB_PERIPHERAL) {
 588                                 set_bit(ID, &motg->inputs);
 589                                 set_bit(B_SESS_VLD, &motg->inputs);
 590                         } else {
 591                                 set_bit(ID, &motg->inputs);
 592                                 clear_bit(B_SESS_VLD, &motg->inputs);
 593                         }
 594                 }
 595                 break;
 596         case USB_HOST:
 597                 clear_bit(ID, &motg->inputs);
 598                 break;
 599         case USB_PERIPHERAL:
 600                 set_bit(ID, &motg->inputs);
 601                 if (otgsc & OTGSC_BSV)
 602                         set_bit(B_SESS_VLD, &motg->inputs);
 603                 else
 604                         clear_bit(B_SESS_VLD, &motg->inputs);
 605                 break;
 606         default:
 607                 break;
 608         }
 609 }
 610
 611 static void msm_otg_sm_work(struct work_struct *w)
 612 {
 613         struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
 614         struct otg_transceiver *otg = &motg->otg;
 615
 616         switch (otg->state) {
 617         case OTG_STATE_UNDEFINED:
 618                 dev_dbg(otg->dev, "OTG_STATE_UNDEFINED state\n");
 619                 msm_otg_reset(otg);
 620                 msm_otg_init_sm(motg);
 621                 otg->state = OTG_STATE_B_IDLE;
 622                 /* FALL THROUGH */
 623         case OTG_STATE_B_IDLE:
 624                 dev_dbg(otg->dev, "OTG_STATE_B_IDLE state\n");
 625                 if (!test_bit(ID, &motg->inputs) && otg->host) {
 626                         /* disable BSV bit */
 627                         writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
 628                         msm_otg_start_host(otg, 1);
 629                         otg->state = OTG_STATE_A_HOST;
 630                 } else if (test_bit(B_SESS_VLD, &motg->inputs) && otg->gadget) {
 631                         msm_otg_start_peripheral(otg, 1);
 632                         otg->state = OTG_STATE_B_PERIPHERAL;
 633                 }
 634                 pm_runtime_put_sync(otg->dev);
 635                 break;
 636         case OTG_STATE_B_PERIPHERAL:
 637                 dev_dbg(otg->dev, "OTG_STATE_B_PERIPHERAL state\n");
 638                 if (!test_bit(B_SESS_VLD, &motg->inputs) ||
 639                                 !test_bit(ID, &motg->inputs)) {
 640                         msm_otg_start_peripheral(otg, 0);
 641                         otg->state = OTG_STATE_B_IDLE;
 642                         msm_otg_reset(otg);
 643                         schedule_work(w);
 644                 }
 645                 break;
 646         case OTG_STATE_A_HOST:
 647                 dev_dbg(otg->dev, "OTG_STATE_A_HOST state\n");
 648                 if (test_bit(ID, &motg->inputs)) {
 649                         msm_otg_start_host(otg, 0);
 650                         otg->state = OTG_STATE_B_IDLE;
 651                         msm_otg_reset(otg);
 652                         schedule_work(w);
 653                 }
 654                 break;
 655         default:
 656                 break;
 657         }
 658 }
 659
 660 static irqreturn_t msm_otg_irq(int irq, void *data)
 661 {
 662         struct msm_otg *motg = data;
 663         struct otg_transceiver *otg = &motg->otg;
 664         u32 otgsc = 0;
 665
 666         if (atomic_read(&motg->in_lpm)) {
 667                 disable_irq_nosync(irq);
 668                 motg->async_int = 1;
 669                 pm_runtime_get(otg->dev);
 670                 return IRQ_HANDLED;
 671         }
 672
 673         otgsc = readl(USB_OTGSC);
 674         if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
 675                 return IRQ_NONE;
 676
 677         if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
 678                 if (otgsc & OTGSC_ID)
 679                         set_bit(ID, &motg->inputs);
 680                 else
 681                         clear_bit(ID, &motg->inputs);
 682                 dev_dbg(otg->dev, "ID set/clear\n");
 683                 pm_runtime_get_noresume(otg->dev);
 684         } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
 685                 if (otgsc & OTGSC_BSV)
 686                         set_bit(B_SESS_VLD, &motg->inputs);
 687                 else
 688                         clear_bit(B_SESS_VLD, &motg->inputs);
 689                 dev_dbg(otg->dev, "BSV set/clear\n");
 690                 pm_runtime_get_noresume(otg->dev);
 691         }
 692
 693         writel(otgsc, USB_OTGSC);
 694         schedule_work(&motg->sm_work);
 695         return IRQ_HANDLED;
 696 }
 697
 698 static int msm_otg_mode_show(struct seq_file *s, void *unused)
 699 {
 700         struct msm_otg *motg = s->private;
 701         struct otg_transceiver *otg = &motg->otg;
 702
 703         switch (otg->state) {
 704         case OTG_STATE_A_HOST:
 705                 seq_printf(s, "host\n");
 706                 break;
 707         case OTG_STATE_B_PERIPHERAL:
 708                 seq_printf(s, "peripheral\n");
 709                 break;
 710         default:
 711                 seq_printf(s, "none\n");
 712                 break;
 713         }
 714
 715         return 0;
 716 }
 717
 718 static int msm_otg_mode_open(struct inode *inode, struct file *file)
 719 {
 720         return single_open(file, msm_otg_mode_show, inode->i_private);
 721 }
 722
 723 static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
 724                                 size_t count, loff_t *ppos)
 725 {
 726         struct seq_file *s = file->private_data;
 727         struct msm_otg *motg = s->private;
 728         char buf[16];
 729         struct otg_transceiver *otg = &motg->otg;
 730         int status = count;
 731         enum usb_mode_type req_mode;
 732
 733         memset(buf, 0x00, sizeof(buf));
 734
 735         if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
 736                 status = -EFAULT;
 737                 goto out;
 738         }
 739
 740         if (!strncmp(buf, "host", 4)) {
 741                 req_mode = USB_HOST;
 742         } else if (!strncmp(buf, "peripheral", 10)) {
 743                 req_mode = USB_PERIPHERAL;
 744         } else if (!strncmp(buf, "none", 4)) {
 745                 req_mode = USB_NONE;
 746         } else {
 747                 status = -EINVAL;
 748                 goto out;
 749         }
 750
 751         switch (req_mode) {
 752         case USB_NONE:
 753                 switch (otg->state) {
 754                 case OTG_STATE_A_HOST:
 755                 case OTG_STATE_B_PERIPHERAL:
 756                         set_bit(ID, &motg->inputs);
 757                         clear_bit(B_SESS_VLD, &motg->inputs);
 758                         break;
 759                 default:
 760                         goto out;
 761                 }
 762                 break;
 763         case USB_PERIPHERAL:
 764                 switch (otg->state) {
 765                 case OTG_STATE_B_IDLE:
 766                 case OTG_STATE_A_HOST:
 767                         set_bit(ID, &motg->inputs);
 768                         set_bit(B_SESS_VLD, &motg->inputs);
 769                         break;
 770                 default:
 771                         goto out;
 772                 }
 773                 break;
 774         case USB_HOST:
 775                 switch (otg->state) {
 776                 case OTG_STATE_B_IDLE:
 777                 case OTG_STATE_B_PERIPHERAL:
 778                         clear_bit(ID, &motg->inputs);
 779                         break;
 780                 default:
 781                         goto out;
 782                 }
 783                 break;
 784         default:
 785                 goto out;
 786         }
 787
 788         pm_runtime_get_sync(otg->dev);
 789         schedule_work(&motg->sm_work);
 790 out:
 791         return status;
 792 }
 793
 794 const struct file_operations msm_otg_mode_fops = {
 795         .open = msm_otg_mode_open,
 796         .read = seq_read,
 797         .write = msm_otg_mode_write,
 798         .llseek = seq_lseek,
 799         .release = single_release,
 800 };
 801
 802 static struct dentry *msm_otg_dbg_root;
 803 static struct dentry *msm_otg_dbg_mode;
 804
 805 static int msm_otg_debugfs_init(struct msm_otg *motg)
 806 {
 807         msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
 808
 809         if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
 810                 return -ENODEV;
 811
 812         msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
 813                                 msm_otg_dbg_root, motg, &msm_otg_mode_fops);
 814         if (!msm_otg_dbg_mode) {
 815                 debugfs_remove(msm_otg_dbg_root);
 816                 msm_otg_dbg_root = NULL;
 817                 return -ENODEV;
 818         }
 819
 820         return 0;
 821 }
 822
 823 static void msm_otg_debugfs_cleanup(void)
 824 {
 825         debugfs_remove(msm_otg_dbg_mode);
 826         debugfs_remove(msm_otg_dbg_root);
 827 }
 828
 829 static int __init msm_otg_probe(struct platform_device *pdev)
 830 {
 831         int ret = 0;
 832         struct resource *res;
 833         struct msm_otg *motg;
 834         struct otg_transceiver *otg;
 835
 836         dev_info(&pdev->dev, "msm_otg probe\n");
 837         if (!pdev->dev.platform_data) {
 838                 dev_err(&pdev->dev, "No platform data given. Bailing out\n");
 839                 return -ENODEV;
 840         }
 841
 842         motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL);
 843         if (!motg) {
 844                 dev_err(&pdev->dev, "unable to allocate msm_otg\n");
 845                 return -ENOMEM;
 846         }
 847
 848         motg->pdata = pdev->dev.platform_data;
 849         otg = &motg->otg;
 850         otg->dev = &pdev->dev;
 851
 852         motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk");
 853         if (IS_ERR(motg->phy_reset_clk)) {
 854                 dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
 855                 ret = PTR_ERR(motg->phy_reset_clk);
 856                 goto free_motg;
 857         }
 858
 859         motg->clk = clk_get(&pdev->dev, "usb_hs_clk");
 860         if (IS_ERR(motg->clk)) {
 861                 dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
 862                 ret = PTR_ERR(motg->clk);
 863                 goto put_phy_reset_clk;
 864         }
 865
 866         motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk");
 867         if (IS_ERR(motg->pclk)) {
 868                 dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
 869                 ret = PTR_ERR(motg->pclk);
 870                 goto put_clk;
 871         }
 872
 873         /*
 874          * USB core clock is not present on all MSM chips. This
 875          * clock is introduced to remove the dependency on AXI
 876          * bus frequency.
 877          */
 878         motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk");
 879         if (IS_ERR(motg->core_clk))
 880                 motg->core_clk = NULL;
 881
 882         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 883         if (!res) {
 884                 dev_err(&pdev->dev, "failed to get platform resource mem\n");
 885                 ret = -ENODEV;
 886                 goto put_core_clk;
 887         }
 888
 889         motg->regs = ioremap(res->start, resource_size(res));
 890         if (!motg->regs) {
 891                 dev_err(&pdev->dev, "ioremap failed\n");
 892                 ret = -ENOMEM;
 893                 goto put_core_clk;
 894         }
 895         dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
 896
 897         motg->irq = platform_get_irq(pdev, 0);
 898         if (!motg->irq) {
 899                 dev_err(&pdev->dev, "platform_get_irq failed\n");
 900                 ret = -ENODEV;
 901                 goto free_regs;
 902         }
 903
 904         clk_enable(motg->clk);
 905         clk_enable(motg->pclk);
 906         if (motg->core_clk)
 907                 clk_enable(motg->core_clk);
 908
 909         writel(0, USB_USBINTR);
 910         writel(0, USB_OTGSC);
 911
 912         INIT_WORK(&motg->sm_work, msm_otg_sm_work);
 913         ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED,
 914                                         "msm_otg", motg);
 915         if (ret) {
 916                 dev_err(&pdev->dev, "request irq failed\n");
 917                 goto disable_clks;
 918         }
 919
 920         otg->init = msm_otg_reset;
 921         otg->set_host = msm_otg_set_host;
 922         otg->set_peripheral = msm_otg_set_peripheral;
 923
 924         otg->io_ops = &msm_otg_io_ops;
 925
 926         ret = otg_set_transceiver(&motg->otg);
 927         if (ret) {
 928                 dev_err(&pdev->dev, "otg_set_transceiver failed\n");
 929                 goto free_irq;
 930         }
 931
 932         platform_set_drvdata(pdev, motg);
 933         device_init_wakeup(&pdev->dev, 1);
 934
 935         if (motg->pdata->mode == USB_OTG &&
 936                         motg->pdata->otg_control == OTG_USER_CONTROL) {
 937                 ret = msm_otg_debugfs_init(motg);
 938                 if (ret)
 939                         dev_dbg(&pdev->dev, "mode debugfs file is"
 940                                         "not available\n");
 941         }
 942
 943         pm_runtime_set_active(&pdev->dev);
 944         pm_runtime_enable(&pdev->dev);
 945
 946         return 0;
 947 free_irq:
 948         free_irq(motg->irq, motg);
 949 disable_clks:
 950         clk_disable(motg->pclk);
 951         clk_disable(motg->clk);
 952 free_regs:
 953         iounmap(motg->regs);
 954 put_core_clk:
 955         if (motg->core_clk)
 956                 clk_put(motg->core_clk);
 957         clk_put(motg->pclk);
 958 put_clk:
 959         clk_put(motg->clk);
 960 put_phy_reset_clk:
 961         clk_put(motg->phy_reset_clk);
 962 free_motg:
 963         kfree(motg);
 964         return ret;
 965 }
 966
 967 static int __devexit msm_otg_remove(struct platform_device *pdev)
 968 {
 969         struct msm_otg *motg = platform_get_drvdata(pdev);
 970         struct otg_transceiver *otg = &motg->otg;
 971         int cnt = 0;
 972
 973         if (otg->host || otg->gadget)
 974                 return -EBUSY;
 975
 976         msm_otg_debugfs_cleanup();
 977         cancel_work_sync(&motg->sm_work);
 978
 979         pm_runtime_resume(&pdev->dev);
 980
 981         device_init_wakeup(&pdev->dev, 0);
 982         pm_runtime_disable(&pdev->dev);
 983
 984         otg_set_transceiver(NULL);
 985         free_irq(motg->irq, motg);
 986
 987         /*
 988          * Put PHY in low power mode.
 989          */
 990         ulpi_read(otg, 0x14);
 991         ulpi_write(otg, 0x08, 0x09);
 992
 993         writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
 994         while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
 995                 if (readl(USB_PORTSC) & PORTSC_PHCD)
 996                         break;
 997                 udelay(1);
 998                 cnt++;
 999         }
1000         if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
1001                 dev_err(otg->dev, "Unable to suspend PHY\n");
1002
1003         clk_disable(motg->pclk);
1004         clk_disable(motg->clk);
1005         if (motg->core_clk)
1006                 clk_disable(motg->core_clk);
1007
1008         iounmap(motg->regs);
1009         pm_runtime_set_suspended(&pdev->dev);
1010
1011         clk_put(motg->phy_reset_clk);
1012         clk_put(motg->pclk);
1013         clk_put(motg->clk);
1014         if (motg->core_clk)
1015                 clk_put(motg->core_clk);
1016
1017         kfree(motg);
1018
1019         return 0;
1020 }
1021
1022 #ifdef CONFIG_PM_RUNTIME
1023 static int msm_otg_runtime_idle(struct device *dev)
1024 {
1025         struct msm_otg *motg = dev_get_drvdata(dev);
1026         struct otg_transceiver *otg = &motg->otg;
1027
1028         dev_dbg(dev, "OTG runtime idle\n");
1029
1030         /*
1031          * It is observed some times that a spurious interrupt
1032          * comes when PHY is put into LPM immediately after PHY reset.
1033          * This 1 sec delay also prevents entering into LPM immediately
1034          * after asynchronous interrupt.
1035          */
1036         if (otg->state != OTG_STATE_UNDEFINED)
1037                 pm_schedule_suspend(dev, 1000);
1038
1039         return -EAGAIN;
1040 }
1041
1042 static int msm_otg_runtime_suspend(struct device *dev)
1043 {
1044         struct msm_otg *motg = dev_get_drvdata(dev);
1045
1046         dev_dbg(dev, "OTG runtime suspend\n");
1047         return msm_otg_suspend(motg);
1048 }
1049
1050 static int msm_otg_runtime_resume(struct device *dev)
1051 {
1052         struct msm_otg *motg = dev_get_drvdata(dev);
1053
1054         dev_dbg(dev, "OTG runtime resume\n");
1055         return msm_otg_resume(motg);
1056 }
1057 #endif
1058
1059 #ifdef CONFIG_PM_SLEEP
1060 static int msm_otg_pm_suspend(struct device *dev)
1061 {
1062         struct msm_otg *motg = dev_get_drvdata(dev);
1063
1064         dev_dbg(dev, "OTG PM suspend\n");
1065         return msm_otg_suspend(motg);
1066 }
1067
1068 static int msm_otg_pm_resume(struct device *dev)
1069 {
1070         struct msm_otg *motg = dev_get_drvdata(dev);
1071         int ret;
1072
1073         dev_dbg(dev, "OTG PM resume\n");
1074
1075         ret = msm_otg_resume(motg);
1076         if (ret)
1077                 return ret;
1078
1079         /*
1080          * Runtime PM Documentation recommends bringing the
1081          * device to full powered state upon resume.
1082          */
1083         pm_runtime_disable(dev);
1084         pm_runtime_set_active(dev);
1085         pm_runtime_enable(dev);
1086
1087         return 0;
1088 }
1089 #endif
1090
1091 #ifdef CONFIG_PM
1092 static const struct dev_pm_ops msm_otg_dev_pm_ops = {
1093         SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
1094         SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
1095                                 msm_otg_runtime_idle)
1096 };
1097 #endif
1098
1099 static struct platform_driver msm_otg_driver = {
1100         .remove = __devexit_p(msm_otg_remove),
1101         .driver = {
1102                 .name = DRIVER_NAME,
1103                 .owner = THIS_MODULE,
1104 #ifdef CONFIG_PM
1105                 .pm = &msm_otg_dev_pm_ops,
1106 #endif
1107         },
1108 };
1109
1110 static int __init msm_otg_init(void)
1111 {
1112         return platform_driver_probe(&msm_otg_driver, msm_otg_probe);
1113 }
1114
1115 static void __exit msm_otg_exit(void)
1116 {
1117         platform_driver_unregister(&msm_otg_driver);
1118 }
1119
1120 module_init(msm_otg_init);
1121 module_exit(msm_otg_exit);
1122
1123 MODULE_LICENSE("GPL v2");
1124 MODULE_DESCRIPTION("MSM USB transceiver driver");