drivers/rtc/rtc-ds1305.c

   1 /*
   2  * rtc-ds1305.c -- driver for DS1305 and DS1306 SPI RTC chips
   3  *
   4  * Copyright (C) 2008 David Brownell
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  */
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/bcd.h>
  14 #include <linux/slab.h>
  15 #include <linux/rtc.h>
  16 #include <linux/workqueue.h>
  17
  18 #include <linux/spi/spi.h>
  19 #include <linux/spi/ds1305.h>
  20
  21
  22 /*
  23  * Registers ... mask DS1305_WRITE into register address to write,
  24  * otherwise you're reading it.  All non-bitmask values are BCD.
  25  */
  26 #define DS1305_WRITE            0x80
  27
  28
  29 /* RTC date/time ... the main special cases are that we:
  30  *  - Need fancy "hours" encoding in 12hour mode
  31  *  - Don't rely on the "day-of-week" field (or tm_wday)
  32  *  - Are a 21st-century clock (2000 <= year < 2100)
  33  */
  34 #define DS1305_RTC_LEN          7               /* bytes for RTC regs */
  35
  36 #define DS1305_SEC              0x00            /* register addresses */
  37 #define DS1305_MIN              0x01
  38 #define DS1305_HOUR             0x02
  39 #       define DS1305_HR_12             0x40    /* set == 12 hr mode */
  40 #       define DS1305_HR_PM             0x20    /* set == PM (12hr mode) */
  41 #define DS1305_WDAY             0x03
  42 #define DS1305_MDAY             0x04
  43 #define DS1305_MON              0x05
  44 #define DS1305_YEAR             0x06
  45
  46
  47 /* The two alarms have only sec/min/hour/wday fields (ALM_LEN).
  48  * DS1305_ALM_DISABLE disables a match field (some combos are bad).
  49  *
  50  * NOTE that since we don't use WDAY, we limit ourselves to alarms
  51  * only one day into the future (vs potentially up to a week).
  52  *
  53  * NOTE ALSO that while we could generate once-a-second IRQs (UIE), we
  54  * don't currently support them.  We'd either need to do it only when
  55  * no alarm is pending (not the standard model), or to use the second
  56  * alarm (implying that this is a DS1305 not DS1306, *and* that either
  57  * it's wired up a second IRQ we know, or that INTCN is set)
  58  */
  59 #define DS1305_ALM_LEN          4               /* bytes for ALM regs */
  60 #define DS1305_ALM_DISABLE      0x80
  61
  62 #define DS1305_ALM0(r)          (0x07 + (r))    /* register addresses */
  63 #define DS1305_ALM1(r)          (0x0b + (r))
  64
  65
  66 /* three control registers */
  67 #define DS1305_CONTROL_LEN      3               /* bytes of control regs */
  68
  69 #define DS1305_CONTROL          0x0f            /* register addresses */
  70 #       define DS1305_nEOSC             0x80    /* low enables oscillator */
  71 #       define DS1305_WP                0x40    /* write protect */
  72 #       define DS1305_INTCN             0x04    /* clear == only int0 used */
  73 #       define DS1306_1HZ               0x04    /* enable 1Hz output */
  74 #       define DS1305_AEI1              0x02    /* enable ALM1 IRQ */
  75 #       define DS1305_AEI0              0x01    /* enable ALM0 IRQ */
  76 #define DS1305_STATUS           0x10
  77 /* status has just AEIx bits, mirrored as IRQFx */
  78 #define DS1305_TRICKLE          0x11
  79 /* trickle bits are defined in <linux/spi/ds1305.h> */
  80
  81 /* a bunch of NVRAM */
  82 #define DS1305_NVRAM_LEN        96              /* bytes of NVRAM */
  83
  84 #define DS1305_NVRAM            0x20            /* register addresses */
  85
  86
  87 struct ds1305 {
  88         struct spi_device       *spi;
  89         struct rtc_device       *rtc;
  90
  91         struct work_struct      work;
  92
  93         unsigned long           flags;
  94 #define FLAG_EXITING    0
  95
  96         bool                    hr12;
  97         u8                      ctrl[DS1305_CONTROL_LEN];
  98 };
  99
 100
 101 /*----------------------------------------------------------------------*/
 102
 103 /*
 104  * Utilities ...  tolerate 12-hour AM/PM notation in case of non-Linux
 105  * software (like a bootloader) which may require it.
 106  */
 107
 108 static unsigned bcd2hour(u8 bcd)
 109 {
 110         if (bcd & DS1305_HR_12) {
 111                 unsigned        hour = 0;
 112
 113                 bcd &= ~DS1305_HR_12;
 114                 if (bcd & DS1305_HR_PM) {
 115                         hour = 12;
 116                         bcd &= ~DS1305_HR_PM;
 117                 }
 118                 hour += bcd2bin(bcd);
 119                 return hour - 1;
 120         }
 121         return bcd2bin(bcd);
 122 }
 123
 124 static u8 hour2bcd(bool hr12, int hour)
 125 {
 126         if (hr12) {
 127                 hour++;
 128                 if (hour <= 12)
 129                         return DS1305_HR_12 | bin2bcd(hour);
 130                 hour -= 12;
 131                 return DS1305_HR_12 | DS1305_HR_PM | bin2bcd(hour);
 132         }
 133         return bin2bcd(hour);
 134 }
 135
 136 /*----------------------------------------------------------------------*/
 137
 138 /*
 139  * Interface to RTC framework
 140  */
 141
 142 #ifdef CONFIG_RTC_INTF_DEV
 143
 144 /*
 145  * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
 146  */
 147 static int ds1305_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
 148 {
 149         struct ds1305   *ds1305 = dev_get_drvdata(dev);
 150         u8              buf[2];
 151         int             status = -ENOIOCTLCMD;
 152
 153         buf[0] = DS1305_WRITE | DS1305_CONTROL;
 154         buf[1] = ds1305->ctrl[0];
 155
 156         switch (cmd) {
 157         case RTC_AIE_OFF:
 158                 status = 0;
 159                 if (!(buf[1] & DS1305_AEI0))
 160                         goto done;
 161                 buf[1] &= ~DS1305_AEI0;
 162                 break;
 163
 164         case RTC_AIE_ON:
 165                 status = 0;
 166                 if (ds1305->ctrl[0] & DS1305_AEI0)
 167                         goto done;
 168                 buf[1] |= DS1305_AEI0;
 169                 break;
 170         }
 171         if (status == 0) {
 172                 status = spi_write_then_read(ds1305->spi, buf, sizeof buf,
 173                                 NULL, 0);
 174                 if (status >= 0)
 175                         ds1305->ctrl[0] = buf[1];
 176         }
 177
 178 done:
 179         return status;
 180 }
 181
 182 #else
 183 #define ds1305_ioctl    NULL
 184 #endif
 185
 186 /*
 187  * Get/set of date and time is pretty normal.
 188  */
 189
 190 static int ds1305_get_time(struct device *dev, struct rtc_time *time)
 191 {
 192         struct ds1305   *ds1305 = dev_get_drvdata(dev);
 193         u8              addr = DS1305_SEC;
 194         u8              buf[DS1305_RTC_LEN];
 195         int             status;
 196
 197         /* Use write-then-read to get all the date/time registers
 198          * since dma from stack is nonportable
 199          */
 200         status = spi_write_then_read(ds1305->spi, &addr, sizeof addr,
 201                         buf, sizeof buf);
 202         if (status < 0)
 203                 return status;
 204
 205         dev_vdbg(dev, "%s: %02x %02x %02x, %02x %02x %02x %02x\n",
 206                 "read", buf[0], buf[1], buf[2], buf[3],
 207                 buf[4], buf[5], buf[6]);
 208
 209         /* Decode the registers */
 210         time->tm_sec = bcd2bin(buf[DS1305_SEC]);
 211         time->tm_min = bcd2bin(buf[DS1305_MIN]);
 212         time->tm_hour = bcd2hour(buf[DS1305_HOUR]);
 213         time->tm_wday = buf[DS1305_WDAY] - 1;
 214         time->tm_mday = bcd2bin(buf[DS1305_MDAY]);
 215         time->tm_mon = bcd2bin(buf[DS1305_MON]) - 1;
 216         time->tm_year = bcd2bin(buf[DS1305_YEAR]) + 100;
 217
 218         dev_vdbg(dev, "%s secs=%d, mins=%d, "
 219                 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
 220                 "read", time->tm_sec, time->tm_min,
 221                 time->tm_hour, time->tm_mday,
 222                 time->tm_mon, time->tm_year, time->tm_wday);
 223
 224         /* Time may not be set */
 225         return rtc_valid_tm(time);
 226 }
 227
 228 static int ds1305_set_time(struct device *dev, struct rtc_time *time)
 229 {
 230         struct ds1305   *ds1305 = dev_get_drvdata(dev);
 231         u8              buf[1 + DS1305_RTC_LEN];
 232         u8              *bp = buf;
 233
 234         dev_vdbg(dev, "%s secs=%d, mins=%d, "
 235                 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
 236                 "write", time->tm_sec, time->tm_min,
 237                 time->tm_hour, time->tm_mday,
 238                 time->tm_mon, time->tm_year, time->tm_wday);
 239
 240         /* Write registers starting at the first time/date address. */
 241         *bp++ = DS1305_WRITE | DS1305_SEC;
 242
 243         *bp++ = bin2bcd(time->tm_sec);
 244         *bp++ = bin2bcd(time->tm_min);
 245         *bp++ = hour2bcd(ds1305->hr12, time->tm_hour);
 246         *bp++ = (time->tm_wday < 7) ? (time->tm_wday + 1) : 1;
 247         *bp++ = bin2bcd(time->tm_mday);
 248         *bp++ = bin2bcd(time->tm_mon + 1);
 249         *bp++ = bin2bcd(time->tm_year - 100);
 250
 251         dev_dbg(dev, "%s: %02x %02x %02x, %02x %02x %02x %02x\n",
 252                 "write", buf[1], buf[2], buf[3],
 253                 buf[4], buf[5], buf[6], buf[7]);
 254
 255         /* use write-then-read since dma from stack is nonportable */
 256         return spi_write_then_read(ds1305->spi, buf, sizeof buf,
 257                         NULL, 0);
 258 }
 259
 260 /*
 261  * Get/set of alarm is a bit funky:
 262  *
 263  * - First there's the inherent raciness of getting the (partitioned)
 264  *   status of an alarm that could trigger while we're reading parts
 265  *   of that status.
 266  *
 267  * - Second there's its limited range (we could increase it a bit by
 268  *   relying on WDAY), which means it will easily roll over.
 269  *
 270  * - Third there's the choice of two alarms and alarm signals.
 271  *   Here we use ALM0 and expect that nINT0 (open drain) is used;
 272  *   that's the only real option for DS1306 runtime alarms, and is
 273  *   natural on DS1305.
 274  *
 275  * - Fourth, there's also ALM1, and a second interrupt signal:
 276  *     + On DS1305 ALM1 uses nINT1 (when INTCN=1) else nINT0;
 277  *     + On DS1306 ALM1 only uses INT1 (an active high pulse)
 278  *       and it won't work when VCC1 is active.
 279  *
 280  *   So to be most general, we should probably set both alarms to the
 281  *   same value, letting ALM1 be the wakeup event source on DS1306
 282  *   and handling several wiring options on DS1305.
 283  *
 284  * - Fifth, we support the polled mode (as well as possible; why not?)
 285  *   even when no interrupt line is wired to an IRQ.
 286  */
 287
 288 /*
 289  * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
 290  */
 291 static int ds1305_get_alarm(struct device *dev, struct rtc_wkalrm *alm)
 292 {
 293         struct ds1305   *ds1305 = dev_get_drvdata(dev);
 294         struct spi_device *spi = ds1305->spi;
 295         u8              addr;
 296         int             status;
 297         u8              buf[DS1305_ALM_LEN];
 298
 299         /* Refresh control register cache BEFORE reading ALM0 registers,
 300          * since reading alarm registers acks any pending IRQ.  That
 301          * makes returning "pending" status a bit of a lie, but that bit
 302          * of EFI status is at best fragile anyway (given IRQ handlers).
 303          */
 304         addr = DS1305_CONTROL;
 305         status = spi_write_then_read(spi, &addr, sizeof addr,
 306                         ds1305->ctrl, sizeof ds1305->ctrl);
 307         if (status < 0)
 308                 return status;
 309
 310         alm->enabled = !!(ds1305->ctrl[0] & DS1305_AEI0);
 311         alm->pending = !!(ds1305->ctrl[1] & DS1305_AEI0);
 312
 313         /* get and check ALM0 registers */
 314         addr = DS1305_ALM0(DS1305_SEC);
 315         status = spi_write_then_read(spi, &addr, sizeof addr,
 316                         buf, sizeof buf);
 317         if (status < 0)
 318                 return status;
 319
 320         dev_vdbg(dev, "%s: %02x %02x %02x %02x\n",
 321                 "alm0 read", buf[DS1305_SEC], buf[DS1305_MIN],
 322                 buf[DS1305_HOUR], buf[DS1305_WDAY]);
 323
 324         if ((DS1305_ALM_DISABLE & buf[DS1305_SEC])
 325                         || (DS1305_ALM_DISABLE & buf[DS1305_MIN])
 326                         || (DS1305_ALM_DISABLE & buf[DS1305_HOUR]))
 327                 return -EIO;
 328
 329         /* Stuff these values into alm->time and let RTC framework code
 330          * fill in the rest ... and also handle rollover to tomorrow when
 331          * that's needed.
 332          */
 333         alm->time.tm_sec = bcd2bin(buf[DS1305_SEC]);
 334         alm->time.tm_min = bcd2bin(buf[DS1305_MIN]);
 335         alm->time.tm_hour = bcd2hour(buf[DS1305_HOUR]);
 336         alm->time.tm_mday = -1;
 337         alm->time.tm_mon = -1;
 338         alm->time.tm_year = -1;
 339         /* next three fields are unused by Linux */
 340         alm->time.tm_wday = -1;
 341         alm->time.tm_mday = -1;
 342         alm->time.tm_isdst = -1;
 343
 344         return 0;
 345 }
 346
 347 /*
 348  * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
 349  */
 350 static int ds1305_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 351 {
 352         struct ds1305   *ds1305 = dev_get_drvdata(dev);
 353         struct spi_device *spi = ds1305->spi;
 354         unsigned long   now, later;
 355         struct rtc_time tm;
 356         int             status;
 357         u8              buf[1 + DS1305_ALM_LEN];
 358
 359         /* convert desired alarm to time_t */
 360         status = rtc_tm_to_time(&alm->time, &later);
 361         if (status < 0)
 362                 return status;
 363
 364         /* Read current time as time_t */
 365         status = ds1305_get_time(dev, &tm);
 366         if (status < 0)
 367                 return status;
 368         status = rtc_tm_to_time(&tm, &now);
 369         if (status < 0)
 370                 return status;
 371
 372         /* make sure alarm fires within the next 24 hours */
 373         if (later <= now)
 374                 return -EINVAL;
 375         if ((later - now) > 24 * 60 * 60)
 376                 return -EDOM;
 377
 378         /* disable alarm if needed */
 379         if (ds1305->ctrl[0] & DS1305_AEI0) {
 380                 ds1305->ctrl[0] &= ~DS1305_AEI0;
 381
 382                 buf[0] = DS1305_WRITE | DS1305_CONTROL;
 383                 buf[1] = ds1305->ctrl[0];
 384                 status = spi_write_then_read(ds1305->spi, buf, 2, NULL, 0);
 385                 if (status < 0)
 386                         return status;
 387         }
 388
 389         /* write alarm */
 390         buf[0] = DS1305_WRITE | DS1305_ALM0(DS1305_SEC);
 391         buf[1 + DS1305_SEC] = bin2bcd(alm->time.tm_sec);
 392         buf[1 + DS1305_MIN] = bin2bcd(alm->time.tm_min);
 393         buf[1 + DS1305_HOUR] = hour2bcd(ds1305->hr12, alm->time.tm_hour);
 394         buf[1 + DS1305_WDAY] = DS1305_ALM_DISABLE;
 395
 396         dev_dbg(dev, "%s: %02x %02x %02x %02x\n",
 397                 "alm0 write", buf[1 + DS1305_SEC], buf[1 + DS1305_MIN],
 398                 buf[1 + DS1305_HOUR], buf[1 + DS1305_WDAY]);
 399
 400         status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
 401         if (status < 0)
 402                 return status;
 403
 404         /* enable alarm if requested */
 405         if (alm->enabled) {
 406                 ds1305->ctrl[0] |= DS1305_AEI0;
 407
 408                 buf[0] = DS1305_WRITE | DS1305_CONTROL;
 409                 buf[1] = ds1305->ctrl[0];
 410                 status = spi_write_then_read(ds1305->spi, buf, 2, NULL, 0);
 411         }
 412
 413         return status;
 414 }
 415
 416 #ifdef CONFIG_PROC_FS
 417
 418 static int ds1305_proc(struct device *dev, struct seq_file *seq)
 419 {
 420         struct ds1305   *ds1305 = dev_get_drvdata(dev);
 421         char            *diodes = "no";
 422         char            *resistors = "";
 423
 424         /* ctrl[2] is treated as read-only; no locking needed */
 425         if ((ds1305->ctrl[2] & 0xf0) == DS1305_TRICKLE_MAGIC) {
 426                 switch (ds1305->ctrl[2] & 0x0c) {
 427                 case DS1305_TRICKLE_DS2:
 428                         diodes = "2 diodes, ";
 429                         break;
 430                 case DS1305_TRICKLE_DS1:
 431                         diodes = "1 diode, ";
 432                         break;
 433                 default:
 434                         goto done;
 435                 }
 436                 switch (ds1305->ctrl[2] & 0x03) {
 437                 case DS1305_TRICKLE_2K:
 438                         resistors = "2k Ohm";
 439                         break;
 440                 case DS1305_TRICKLE_4K:
 441                         resistors = "4k Ohm";
 442                         break;
 443                 case DS1305_TRICKLE_8K:
 444                         resistors = "8k Ohm";
 445                         break;
 446                 default:
 447                         diodes = "no";
 448                         break;
 449                 }
 450         }
 451
 452 done:
 453         return seq_printf(seq,
 454                         "trickle_charge\t: %s%s\n",
 455                         diodes, resistors);
 456 }
 457
 458 #else
 459 #define ds1305_proc     NULL
 460 #endif
 461
 462 static const struct rtc_class_ops ds1305_ops = {
 463         .ioctl          = ds1305_ioctl,
 464         .read_time      = ds1305_get_time,
 465         .set_time       = ds1305_set_time,
 466         .read_alarm     = ds1305_get_alarm,
 467         .set_alarm      = ds1305_set_alarm,
 468         .proc           = ds1305_proc,
 469 };
 470
 471 static void ds1305_work(struct work_struct *work)
 472 {
 473         struct ds1305   *ds1305 = container_of(work, struct ds1305, work);
 474         struct mutex    *lock = &ds1305->rtc->ops_lock;
 475         struct spi_device *spi = ds1305->spi;
 476         u8              buf[3];
 477         int             status;
 478
 479         /* lock to protect ds1305->ctrl */
 480         mutex_lock(lock);
 481
 482         /* Disable the IRQ, and clear its status ... for now, we "know"
 483          * that if more than one alarm is active, they're in sync.
 484          * Note that reading ALM data registers also clears IRQ status.
 485          */
 486         ds1305->ctrl[0] &= ~(DS1305_AEI1 | DS1305_AEI0);
 487         ds1305->ctrl[1] = 0;
 488
 489         buf[0] = DS1305_WRITE | DS1305_CONTROL;
 490         buf[1] = ds1305->ctrl[0];
 491         buf[2] = 0;
 492
 493         status = spi_write_then_read(spi, buf, sizeof buf,
 494                         NULL, 0);
 495         if (status < 0)
 496                 dev_dbg(&spi->dev, "clear irq --> %d\n", status);
 497
 498         mutex_unlock(lock);
 499
 500         if (!test_bit(FLAG_EXITING, &ds1305->flags))
 501                 enable_irq(spi->irq);
 502
 503         rtc_update_irq(ds1305->rtc, 1, RTC_AF | RTC_IRQF);
 504 }
 505
 506 /*
 507  * This "real" IRQ handler hands off to a workqueue mostly to allow
 508  * mutex locking for ds1305->ctrl ... unlike I2C, we could issue async
 509  * I/O requests in IRQ context (to clear the IRQ status).
 510  */
 511 static irqreturn_t ds1305_irq(int irq, void *p)
 512 {
 513         struct ds1305           *ds1305 = p;
 514
 515         disable_irq(irq);
 516         schedule_work(&ds1305->work);
 517         return IRQ_HANDLED;
 518 }
 519
 520 /*----------------------------------------------------------------------*/
 521
 522 /*
 523  * Interface for NVRAM
 524  */
 525
 526 static void msg_init(struct spi_message *m, struct spi_transfer *x,
 527                 u8 *addr, size_t count, char *tx, char *rx)
 528 {
 529         spi_message_init(m);
 530         memset(x, 0, 2 * sizeof(*x));
 531
 532         x->tx_buf = addr;
 533         x->len = 1;
 534         spi_message_add_tail(x, m);
 535
 536         x++;
 537
 538         x->tx_buf = tx;
 539         x->rx_buf = rx;
 540         x->len = count;
 541         spi_message_add_tail(x, m);
 542 }
 543
 544 static ssize_t
 545 ds1305_nvram_read(struct file *filp, struct kobject *kobj,
 546                 struct bin_attribute *attr,
 547                 char *buf, loff_t off, size_t count)
 548 {
 549         struct spi_device       *spi;
 550         u8                      addr;
 551         struct spi_message      m;
 552         struct spi_transfer     x[2];
 553         int                     status;
 554
 555         spi = container_of(kobj, struct spi_device, dev.kobj);
 556
 557         if (unlikely(off >= DS1305_NVRAM_LEN))
 558                 return 0;
 559         if (count >= DS1305_NVRAM_LEN)
 560                 count = DS1305_NVRAM_LEN;
 561         if ((off + count) > DS1305_NVRAM_LEN)
 562                 count = DS1305_NVRAM_LEN - off;
 563         if (unlikely(!count))
 564                 return count;
 565
 566         addr = DS1305_NVRAM + off;
 567         msg_init(&m, x, &addr, count, NULL, buf);
 568
 569         status = spi_sync(spi, &m);
 570         if (status < 0)
 571                 dev_err(&spi->dev, "nvram %s error %d\n", "read", status);
 572         return (status < 0) ? status : count;
 573 }
 574
 575 static ssize_t
 576 ds1305_nvram_write(struct file *filp, struct kobject *kobj,
 577                 struct bin_attribute *attr,
 578                 char *buf, loff_t off, size_t count)
 579 {
 580         struct spi_device       *spi;
 581         u8                      addr;
 582         struct spi_message      m;
 583         struct spi_transfer     x[2];
 584         int                     status;
 585
 586         spi = container_of(kobj, struct spi_device, dev.kobj);
 587
 588         if (unlikely(off >= DS1305_NVRAM_LEN))
 589                 return -EFBIG;
 590         if (count >= DS1305_NVRAM_LEN)
 591                 count = DS1305_NVRAM_LEN;
 592         if ((off + count) > DS1305_NVRAM_LEN)
 593                 count = DS1305_NVRAM_LEN - off;
 594         if (unlikely(!count))
 595                 return count;
 596
 597         addr = (DS1305_WRITE | DS1305_NVRAM) + off;
 598         msg_init(&m, x, &addr, count, buf, NULL);
 599
 600         status = spi_sync(spi, &m);
 601         if (status < 0)
 602                 dev_err(&spi->dev, "nvram %s error %d\n", "write", status);
 603         return (status < 0) ? status : count;
 604 }
 605
 606 static struct bin_attribute nvram = {
 607         .attr.name      = "nvram",
 608         .attr.mode      = S_IRUGO | S_IWUSR,
 609         .read           = ds1305_nvram_read,
 610         .write          = ds1305_nvram_write,
 611         .size           = DS1305_NVRAM_LEN,
 612 };
 613
 614 /*----------------------------------------------------------------------*/
 615
 616 /*
 617  * Interface to SPI stack
 618  */
 619
 620 static int __devinit ds1305_probe(struct spi_device *spi)
 621 {
 622         struct ds1305                   *ds1305;
 623         int                             status;
 624         u8                              addr, value;
 625         struct ds1305_platform_data     *pdata = spi->dev.platform_data;
 626         bool                            write_ctrl = false;
 627
 628         /* Sanity check board setup data.  This may be hooked up
 629          * in 3wire mode, but we don't care.  Note that unless
 630          * there's an inverter in place, this needs SPI_CS_HIGH!
 631          */
 632         if ((spi->bits_per_word && spi->bits_per_word != 8)
 633                         || (spi->max_speed_hz > 2000000)
 634                         || !(spi->mode & SPI_CPHA))
 635                 return -EINVAL;
 636
 637         /* set up driver data */
 638         ds1305 = kzalloc(sizeof *ds1305, GFP_KERNEL);
 639         if (!ds1305)
 640                 return -ENOMEM;
 641         ds1305->spi = spi;
 642         spi_set_drvdata(spi, ds1305);
 643
 644         /* read and cache control registers */
 645         addr = DS1305_CONTROL;
 646         status = spi_write_then_read(spi, &addr, sizeof addr,
 647                         ds1305->ctrl, sizeof ds1305->ctrl);
 648         if (status < 0) {
 649                 dev_dbg(&spi->dev, "can't %s, %d\n",
 650                                 "read", status);
 651                 goto fail0;
 652         }
 653
 654         dev_dbg(&spi->dev, "ctrl %s: %02x %02x %02x\n",
 655                         "read", ds1305->ctrl[0],
 656                         ds1305->ctrl[1], ds1305->ctrl[2]);
 657
 658         /* Sanity check register values ... partially compensating for the
 659          * fact that SPI has no device handshake.  A pullup on MISO would
 660          * make these tests fail; but not all systems will have one.  If
 661          * some register is neither 0x00 nor 0xff, a chip is likely there.
 662          */
 663         if ((ds1305->ctrl[0] & 0x38) != 0 || (ds1305->ctrl[1] & 0xfc) != 0) {
 664                 dev_dbg(&spi->dev, "RTC chip is not present\n");
 665                 status = -ENODEV;
 666                 goto fail0;
 667         }
 668         if (ds1305->ctrl[2] == 0)
 669                 dev_dbg(&spi->dev, "chip may not be present\n");
 670
 671         /* enable writes if needed ... if we were paranoid it would
 672          * make sense to enable them only when absolutely necessary.
 673          */
 674         if (ds1305->ctrl[0] & DS1305_WP) {
 675                 u8              buf[2];
 676
 677                 ds1305->ctrl[0] &= ~DS1305_WP;
 678
 679                 buf[0] = DS1305_WRITE | DS1305_CONTROL;
 680                 buf[1] = ds1305->ctrl[0];
 681                 status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
 682
 683                 dev_dbg(&spi->dev, "clear WP --> %d\n", status);
 684                 if (status < 0)
 685                         goto fail0;
 686         }
 687
 688         /* on DS1305, maybe start oscillator; like most low power
 689          * oscillators, it may take a second to stabilize
 690          */
 691         if (ds1305->ctrl[0] & DS1305_nEOSC) {
 692                 ds1305->ctrl[0] &= ~DS1305_nEOSC;
 693                 write_ctrl = true;
 694                 dev_warn(&spi->dev, "SET TIME!\n");
 695         }
 696
 697         /* ack any pending IRQs */
 698         if (ds1305->ctrl[1]) {
 699                 ds1305->ctrl[1] = 0;
 700                 write_ctrl = true;
 701         }
 702
 703         /* this may need one-time (re)init */
 704         if (pdata) {
 705                 /* maybe enable trickle charge */
 706                 if (((ds1305->ctrl[2] & 0xf0) != DS1305_TRICKLE_MAGIC)) {
 707                         ds1305->ctrl[2] = DS1305_TRICKLE_MAGIC
 708                                                 | pdata->trickle;
 709                         write_ctrl = true;
 710                 }
 711
 712                 /* on DS1306, configure 1 Hz signal */
 713                 if (pdata->is_ds1306) {
 714                         if (pdata->en_1hz) {
 715                                 if (!(ds1305->ctrl[0] & DS1306_1HZ)) {
 716                                         ds1305->ctrl[0] |= DS1306_1HZ;
 717                                         write_ctrl = true;
 718                                 }
 719                         } else {
 720                                 if (ds1305->ctrl[0] & DS1306_1HZ) {
 721                                         ds1305->ctrl[0] &= ~DS1306_1HZ;
 722                                         write_ctrl = true;
 723                                 }
 724                         }
 725                 }
 726         }
 727
 728         if (write_ctrl) {
 729                 u8              buf[4];
 730
 731                 buf[0] = DS1305_WRITE | DS1305_CONTROL;
 732                 buf[1] = ds1305->ctrl[0];
 733                 buf[2] = ds1305->ctrl[1];
 734                 buf[3] = ds1305->ctrl[2];
 735                 status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
 736                 if (status < 0) {
 737                         dev_dbg(&spi->dev, "can't %s, %d\n",
 738                                         "write", status);
 739                         goto fail0;
 740                 }
 741
 742                 dev_dbg(&spi->dev, "ctrl %s: %02x %02x %02x\n",
 743                                 "write", ds1305->ctrl[0],
 744                                 ds1305->ctrl[1], ds1305->ctrl[2]);
 745         }
 746
 747         /* see if non-Linux software set up AM/PM mode */
 748         addr = DS1305_HOUR;
 749         status = spi_write_then_read(spi, &addr, sizeof addr,
 750                                 &value, sizeof value);
 751         if (status < 0) {
 752                 dev_dbg(&spi->dev, "read HOUR --> %d\n", status);
 753                 goto fail0;
 754         }
 755
 756         ds1305->hr12 = (DS1305_HR_12 & value) != 0;
 757         if (ds1305->hr12)
 758                 dev_dbg(&spi->dev, "AM/PM\n");
 759
 760         /* register RTC ... from here on, ds1305->ctrl needs locking */
 761         ds1305->rtc = rtc_device_register("ds1305", &spi->dev,
 762                         &ds1305_ops, THIS_MODULE);
 763         if (IS_ERR(ds1305->rtc)) {
 764                 status = PTR_ERR(ds1305->rtc);
 765                 dev_dbg(&spi->dev, "register rtc --> %d\n", status);
 766                 goto fail0;
 767         }
 768
 769         /* Maybe set up alarm IRQ; be ready to handle it triggering right
 770          * away.  NOTE that we don't share this.  The signal is active low,
 771          * and we can't ack it before a SPI message delay.  We temporarily
 772          * disable the IRQ until it's acked, which lets us work with more
 773          * IRQ trigger modes (not all IRQ controllers can do falling edge).
 774          */
 775         if (spi->irq) {
 776                 INIT_WORK(&ds1305->work, ds1305_work);
 777                 status = request_irq(spi->irq, ds1305_irq,
 778                                 0, dev_name(&ds1305->rtc->dev), ds1305);
 779                 if (status < 0) {
 780                         dev_dbg(&spi->dev, "request_irq %d --> %d\n",
 781                                         spi->irq, status);
 782                         goto fail1;
 783                 }
 784
 785                 device_set_wakeup_capable(&spi->dev, 1);
 786         }
 787
 788         /* export NVRAM */
 789         status = sysfs_create_bin_file(&spi->dev.kobj, &nvram);
 790         if (status < 0) {
 791                 dev_dbg(&spi->dev, "register nvram --> %d\n", status);
 792                 goto fail2;
 793         }
 794
 795         return 0;
 796
 797 fail2:
 798         free_irq(spi->irq, ds1305);
 799 fail1:
 800         rtc_device_unregister(ds1305->rtc);
 801 fail0:
 802         kfree(ds1305);
 803         return status;
 804 }
 805
 806 static int __devexit ds1305_remove(struct spi_device *spi)
 807 {
 808         struct ds1305 *ds1305 = spi_get_drvdata(spi);
 809
 810         sysfs_remove_bin_file(&spi->dev.kobj, &nvram);
 811
 812         /* carefully shut down irq and workqueue, if present */
 813         if (spi->irq) {
 814                 set_bit(FLAG_EXITING, &ds1305->flags);
 815                 free_irq(spi->irq, ds1305);
 816                 flush_scheduled_work();
 817         }
 818
 819         rtc_device_unregister(ds1305->rtc);
 820         spi_set_drvdata(spi, NULL);
 821         kfree(ds1305);
 822         return 0;
 823 }
 824
 825 static struct spi_driver ds1305_driver = {
 826         .driver.name    = "rtc-ds1305",
 827         .driver.owner   = THIS_MODULE,
 828         .probe          = ds1305_probe,
 829         .remove         = __devexit_p(ds1305_remove),
 830         /* REVISIT add suspend/resume */
 831 };
 832
 833 static int __init ds1305_init(void)
 834 {
 835         return spi_register_driver(&ds1305_driver);
 836 }
 837 module_init(ds1305_init);
 838
 839 static void __exit ds1305_exit(void)
 840 {
 841         spi_unregister_driver(&ds1305_driver);
 842 }
 843 module_exit(ds1305_exit);
 844
 845 MODULE_DESCRIPTION("RTC driver for DS1305 and DS1306 chips");
 846 MODULE_LICENSE("GPL");
 847 MODULE_ALIAS("spi:rtc-ds1305");