TTY: serial, remove dead code from 68328
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / scsi / qlogicfas408.c
blobc3a9151ca823cb64651390e940794262d9b7d989
1 /*----------------------------------------------------------------*/
2 /*
3 Qlogic linux driver - work in progress. No Warranty express or implied.
4 Use at your own risk. Support Tort Reform so you won't have to read all
5 these silly disclaimers.
7 Copyright 1994, Tom Zerucha.
8 tz@execpc.com
10 Additional Code, and much appreciated help by
11 Michael A. Griffith
12 grif@cs.ucr.edu
14 Thanks to Eric Youngdale and Dave Hinds for loadable module and PCMCIA
15 help respectively, and for suffering through my foolishness during the
16 debugging process.
18 Reference Qlogic FAS408 Technical Manual, 53408-510-00A, May 10, 1994
19 (you can reference it, but it is incomplete and inaccurate in places)
21 Version 0.46 1/30/97 - kernel 1.2.0+
23 Functions as standalone, loadable, and PCMCIA driver, the latter from
24 Dave Hinds' PCMCIA package.
26 Cleaned up 26/10/2002 by Alan Cox <alan@lxorguk.ukuu.org.uk> as part of the 2.5
27 SCSI driver cleanup and audit. This driver still needs work on the
28 following
29 - Non terminating hardware waits
30 - Some layering violations with its pcmcia stub
32 Redistributable under terms of the GNU General Public License
34 For the avoidance of doubt the "preferred form" of this code is one which
35 is in an open non patent encumbered format. Where cryptographic key signing
36 forms part of the process of creating an executable the information
37 including keys needed to generate an equivalently functional executable
38 are deemed to be part of the source code.
42 #include <linux/module.h>
43 #include <linux/blkdev.h> /* to get disk capacity */
44 #include <linux/kernel.h>
45 #include <linux/string.h>
46 #include <linux/init.h>
47 #include <linux/interrupt.h>
48 #include <linux/ioport.h>
49 #include <linux/proc_fs.h>
50 #include <linux/unistd.h>
51 #include <linux/spinlock.h>
52 #include <linux/stat.h>
54 #include <asm/io.h>
55 #include <asm/irq.h>
56 #include <asm/dma.h>
58 #include "scsi.h"
59 #include <scsi/scsi_host.h>
60 #include "qlogicfas408.h"
62 /*----------------------------------------------------------------*/
63 static int qlcfg5 = (XTALFREQ << 5); /* 15625/512 */
64 static int qlcfg6 = SYNCXFRPD;
65 static int qlcfg7 = SYNCOFFST;
66 static int qlcfg8 = (SLOWCABLE << 7) | (QL_ENABLE_PARITY << 4);
67 static int qlcfg9 = ((XTALFREQ + 4) / 5);
68 static int qlcfgc = (FASTCLK << 3) | (FASTSCSI << 4);
70 /*----------------------------------------------------------------*/
72 /*----------------------------------------------------------------*/
73 /* local functions */
74 /*----------------------------------------------------------------*/
76 /* error recovery - reset everything */
78 static void ql_zap(struct qlogicfas408_priv *priv)
80 int x;
81 int qbase = priv->qbase;
82 int int_type = priv->int_type;
84 x = inb(qbase + 0xd);
85 REG0;
86 outb(3, qbase + 3); /* reset SCSI */
87 outb(2, qbase + 3); /* reset chip */
88 if (x & 0x80)
89 REG1;
93 * Do a pseudo-dma tranfer
96 static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request, int reqlen)
98 int j;
99 int qbase = priv->qbase;
100 j = 0;
101 if (phase & 1) { /* in */
102 #if QL_TURBO_PDMA
103 rtrc(4)
104 /* empty fifo in large chunks */
105 if (reqlen >= 128 && (inb(qbase + 8) & 2)) { /* full */
106 insl(qbase + 4, request, 32);
107 reqlen -= 128;
108 request += 128;
110 while (reqlen >= 84 && !(j & 0xc0)) /* 2/3 */
111 if ((j = inb(qbase + 8)) & 4)
113 insl(qbase + 4, request, 21);
114 reqlen -= 84;
115 request += 84;
117 if (reqlen >= 44 && (inb(qbase + 8) & 8)) { /* 1/3 */
118 insl(qbase + 4, request, 11);
119 reqlen -= 44;
120 request += 44;
122 #endif
123 /* until both empty and int (or until reclen is 0) */
124 rtrc(7)
125 j = 0;
126 while (reqlen && !((j & 0x10) && (j & 0xc0)))
128 /* while bytes to receive and not empty */
129 j &= 0xc0;
130 while (reqlen && !((j = inb(qbase + 8)) & 0x10))
132 *request++ = inb(qbase + 4);
133 reqlen--;
135 if (j & 0x10)
136 j = inb(qbase + 8);
139 } else { /* out */
140 #if QL_TURBO_PDMA
141 rtrc(4)
142 if (reqlen >= 128 && inb(qbase + 8) & 0x10) { /* empty */
143 outsl(qbase + 4, request, 32);
144 reqlen -= 128;
145 request += 128;
147 while (reqlen >= 84 && !(j & 0xc0)) /* 1/3 */
148 if (!((j = inb(qbase + 8)) & 8)) {
149 outsl(qbase + 4, request, 21);
150 reqlen -= 84;
151 request += 84;
153 if (reqlen >= 40 && !(inb(qbase + 8) & 4)) { /* 2/3 */
154 outsl(qbase + 4, request, 10);
155 reqlen -= 40;
156 request += 40;
158 #endif
159 /* until full and int (or until reclen is 0) */
160 rtrc(7)
161 j = 0;
162 while (reqlen && !((j & 2) && (j & 0xc0))) {
163 /* while bytes to send and not full */
164 while (reqlen && !((j = inb(qbase + 8)) & 2))
166 outb(*request++, qbase + 4);
167 reqlen--;
169 if (j & 2)
170 j = inb(qbase + 8);
173 /* maybe return reqlen */
174 return inb(qbase + 8) & 0xc0;
178 * Wait for interrupt flag (polled - not real hardware interrupt)
181 static int ql_wai(struct qlogicfas408_priv *priv)
183 int k;
184 int qbase = priv->qbase;
185 unsigned long i;
187 k = 0;
188 i = jiffies + WATCHDOG;
189 while (time_before(jiffies, i) && !priv->qabort &&
190 !((k = inb(qbase + 4)) & 0xe0)) {
191 barrier();
192 cpu_relax();
194 if (time_after_eq(jiffies, i))
195 return (DID_TIME_OUT);
196 if (priv->qabort)
197 return (priv->qabort == 1 ? DID_ABORT : DID_RESET);
198 if (k & 0x60)
199 ql_zap(priv);
200 if (k & 0x20)
201 return (DID_PARITY);
202 if (k & 0x40)
203 return (DID_ERROR);
204 return 0;
208 * Initiate scsi command - queueing handler
209 * caller must hold host lock
212 static void ql_icmd(struct scsi_cmnd *cmd)
214 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
215 int qbase = priv->qbase;
216 int int_type = priv->int_type;
217 unsigned int i;
219 priv->qabort = 0;
221 REG0;
222 /* clearing of interrupts and the fifo is needed */
224 inb(qbase + 5); /* clear interrupts */
225 if (inb(qbase + 5)) /* if still interrupting */
226 outb(2, qbase + 3); /* reset chip */
227 else if (inb(qbase + 7) & 0x1f)
228 outb(1, qbase + 3); /* clear fifo */
229 while (inb(qbase + 5)); /* clear ints */
230 REG1;
231 outb(1, qbase + 8); /* set for PIO pseudo DMA */
232 outb(0, qbase + 0xb); /* disable ints */
233 inb(qbase + 8); /* clear int bits */
234 REG0;
235 outb(0x40, qbase + 0xb); /* enable features */
237 /* configurables */
238 outb(qlcfgc, qbase + 0xc);
239 /* config: no reset interrupt, (initiator) bus id */
240 outb(0x40 | qlcfg8 | priv->qinitid, qbase + 8);
241 outb(qlcfg7, qbase + 7);
242 outb(qlcfg6, qbase + 6);
243 /**/ outb(qlcfg5, qbase + 5); /* select timer */
244 outb(qlcfg9 & 7, qbase + 9); /* prescaler */
245 /* outb(0x99, qbase + 5); */
246 outb(scmd_id(cmd), qbase + 4);
248 for (i = 0; i < cmd->cmd_len; i++)
249 outb(cmd->cmnd[i], qbase + 2);
251 priv->qlcmd = cmd;
252 outb(0x41, qbase + 3); /* select and send command */
256 * Process scsi command - usually after interrupt
259 static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
261 unsigned int i, j;
262 unsigned long k;
263 unsigned int result; /* ultimate return result */
264 unsigned int status; /* scsi returned status */
265 unsigned int message; /* scsi returned message */
266 unsigned int phase; /* recorded scsi phase */
267 unsigned int reqlen; /* total length of transfer */
268 char *buf;
269 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
270 int qbase = priv->qbase;
271 int int_type = priv->int_type;
273 rtrc(1)
274 j = inb(qbase + 6);
275 i = inb(qbase + 5);
276 if (i == 0x20) {
277 return (DID_NO_CONNECT << 16);
279 i |= inb(qbase + 5); /* the 0x10 bit can be set after the 0x08 */
280 if (i != 0x18) {
281 printk(KERN_ERR "Ql:Bad Interrupt status:%02x\n", i);
282 ql_zap(priv);
283 return (DID_BAD_INTR << 16);
285 j &= 7; /* j = inb( qbase + 7 ) >> 5; */
287 /* correct status is supposed to be step 4 */
288 /* it sometimes returns step 3 but with 0 bytes left to send */
289 /* We can try stuffing the FIFO with the max each time, but we will get a
290 sequence of 3 if any bytes are left (but we do flush the FIFO anyway */
292 if (j != 3 && j != 4) {
293 printk(KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n",
294 j, i, inb(qbase + 7) & 0x1f);
295 ql_zap(priv);
296 return (DID_ERROR << 16);
298 result = DID_OK;
299 if (inb(qbase + 7) & 0x1f) /* if some bytes in fifo */
300 outb(1, qbase + 3); /* clear fifo */
301 /* note that request_bufflen is the total xfer size when sg is used */
302 reqlen = scsi_bufflen(cmd);
303 /* note that it won't work if transfers > 16M are requested */
304 if (reqlen && !((phase = inb(qbase + 4)) & 6)) { /* data phase */
305 struct scatterlist *sg;
306 rtrc(2)
307 outb(reqlen, qbase); /* low-mid xfer cnt */
308 outb(reqlen >> 8, qbase + 1); /* low-mid xfer cnt */
309 outb(reqlen >> 16, qbase + 0xe); /* high xfer cnt */
310 outb(0x90, qbase + 3); /* command do xfer */
311 /* PIO pseudo DMA to buffer or sglist */
312 REG1;
314 scsi_for_each_sg(cmd, sg, scsi_sg_count(cmd), i) {
315 if (priv->qabort) {
316 REG0;
317 return ((priv->qabort == 1 ?
318 DID_ABORT : DID_RESET) << 16);
320 buf = sg_virt(sg);
321 if (ql_pdma(priv, phase, buf, sg->length))
322 break;
324 REG0;
325 rtrc(2)
327 * Wait for irq (split into second state of irq handler
328 * if this can take time)
330 if ((k = ql_wai(priv)))
331 return (k << 16);
332 k = inb(qbase + 5); /* should be 0x10, bus service */
336 * Enter Status (and Message In) Phase
339 k = jiffies + WATCHDOG;
341 while (time_before(jiffies, k) && !priv->qabort &&
342 !(inb(qbase + 4) & 6))
343 cpu_relax(); /* wait for status phase */
345 if (time_after_eq(jiffies, k)) {
346 ql_zap(priv);
347 return (DID_TIME_OUT << 16);
350 /* FIXME: timeout ?? */
351 while (inb(qbase + 5))
352 cpu_relax(); /* clear pending ints */
354 if (priv->qabort)
355 return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
357 outb(0x11, qbase + 3); /* get status and message */
358 if ((k = ql_wai(priv)))
359 return (k << 16);
360 i = inb(qbase + 5); /* get chip irq stat */
361 j = inb(qbase + 7) & 0x1f; /* and bytes rec'd */
362 status = inb(qbase + 2);
363 message = inb(qbase + 2);
366 * Should get function complete int if Status and message, else
367 * bus serv if only status
369 if (!((i == 8 && j == 2) || (i == 0x10 && j == 1))) {
370 printk(KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j);
371 result = DID_ERROR;
373 outb(0x12, qbase + 3); /* done, disconnect */
374 rtrc(1)
375 if ((k = ql_wai(priv)))
376 return (k << 16);
379 * Should get bus service interrupt and disconnect interrupt
382 i = inb(qbase + 5); /* should be bus service */
383 while (!priv->qabort && ((i & 0x20) != 0x20)) {
384 barrier();
385 cpu_relax();
386 i |= inb(qbase + 5);
388 rtrc(0)
390 if (priv->qabort)
391 return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
393 return (result << 16) | (message << 8) | (status & STATUS_MASK);
397 * Interrupt handler
400 static void ql_ihandl(void *dev_id)
402 struct scsi_cmnd *icmd;
403 struct Scsi_Host *host = dev_id;
404 struct qlogicfas408_priv *priv = get_priv_by_host(host);
405 int qbase = priv->qbase;
406 REG0;
408 if (!(inb(qbase + 4) & 0x80)) /* false alarm? */
409 return;
411 if (priv->qlcmd == NULL) { /* no command to process? */
412 int i;
413 i = 16;
414 while (i-- && inb(qbase + 5)); /* maybe also ql_zap() */
415 return;
417 icmd = priv->qlcmd;
418 icmd->result = ql_pcmd(icmd);
419 priv->qlcmd = NULL;
421 * If result is CHECK CONDITION done calls qcommand to request
422 * sense
424 (icmd->scsi_done) (icmd);
427 irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id)
429 unsigned long flags;
430 struct Scsi_Host *host = dev_id;
432 spin_lock_irqsave(host->host_lock, flags);
433 ql_ihandl(dev_id);
434 spin_unlock_irqrestore(host->host_lock, flags);
435 return IRQ_HANDLED;
439 * Queued command
442 static int qlogicfas408_queuecommand_lck(struct scsi_cmnd *cmd,
443 void (*done) (struct scsi_cmnd *))
445 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
446 if (scmd_id(cmd) == priv->qinitid) {
447 cmd->result = DID_BAD_TARGET << 16;
448 done(cmd);
449 return 0;
452 cmd->scsi_done = done;
453 /* wait for the last command's interrupt to finish */
454 while (priv->qlcmd != NULL) {
455 barrier();
456 cpu_relax();
458 ql_icmd(cmd);
459 return 0;
462 DEF_SCSI_QCMD(qlogicfas408_queuecommand)
465 * Return bios parameters
468 int qlogicfas408_biosparam(struct scsi_device *disk, struct block_device *dev,
469 sector_t capacity, int ip[])
471 /* This should mimic the DOS Qlogic driver's behavior exactly */
472 ip[0] = 0x40;
473 ip[1] = 0x20;
474 ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);
475 if (ip[2] > 1024) {
476 ip[0] = 0xff;
477 ip[1] = 0x3f;
478 ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);
479 #if 0
480 if (ip[2] > 1023)
481 ip[2] = 1023;
482 #endif
484 return 0;
488 * Abort a command in progress
491 int qlogicfas408_abort(struct scsi_cmnd *cmd)
493 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
494 priv->qabort = 1;
495 ql_zap(priv);
496 return SUCCESS;
500 * Reset SCSI bus
501 * FIXME: This function is invoked with cmd = NULL directly by
502 * the PCMCIA qlogic_stub code. This wants fixing
505 int qlogicfas408_bus_reset(struct scsi_cmnd *cmd)
507 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
508 unsigned long flags;
510 priv->qabort = 2;
512 spin_lock_irqsave(cmd->device->host->host_lock, flags);
513 ql_zap(priv);
514 spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
516 return SUCCESS;
520 * Return info string
523 const char *qlogicfas408_info(struct Scsi_Host *host)
525 struct qlogicfas408_priv *priv = get_priv_by_host(host);
526 return priv->qinfo;
530 * Get type of chip
533 int qlogicfas408_get_chip_type(int qbase, int int_type)
535 REG1;
536 return inb(qbase + 0xe) & 0xf8;
540 * Perform initialization tasks
543 void qlogicfas408_setup(int qbase, int id, int int_type)
545 outb(1, qbase + 8); /* set for PIO pseudo DMA */
546 REG0;
547 outb(0x40 | qlcfg8 | id, qbase + 8); /* (ini) bus id, disable scsi rst */
548 outb(qlcfg5, qbase + 5); /* select timer */
549 outb(qlcfg9, qbase + 9); /* prescaler */
551 #if QL_RESET_AT_START
552 outb(3, qbase + 3);
554 REG1;
555 /* FIXME: timeout */
556 while (inb(qbase + 0xf) & 4)
557 cpu_relax();
559 REG0;
560 #endif
564 * Checks if this is a QLogic FAS 408
567 int qlogicfas408_detect(int qbase, int int_type)
569 REG1;
570 return (((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7) &&
571 ((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7));
575 * Disable interrupts
578 void qlogicfas408_disable_ints(struct qlogicfas408_priv *priv)
580 int qbase = priv->qbase;
581 int int_type = priv->int_type;
583 REG1;
584 outb(0, qbase + 0xb); /* disable ints */
588 * Init and exit functions
591 static int __init qlogicfas408_init(void)
593 return 0;
596 static void __exit qlogicfas408_exit(void)
601 MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
602 MODULE_DESCRIPTION("Driver for the Qlogic FAS SCSI controllers");
603 MODULE_LICENSE("GPL");
604 module_init(qlogicfas408_init);
605 module_exit(qlogicfas408_exit);
607 EXPORT_SYMBOL(qlogicfas408_info);
608 EXPORT_SYMBOL(qlogicfas408_queuecommand);
609 EXPORT_SYMBOL(qlogicfas408_abort);
610 EXPORT_SYMBOL(qlogicfas408_bus_reset);
611 EXPORT_SYMBOL(qlogicfas408_biosparam);
612 EXPORT_SYMBOL(qlogicfas408_ihandl);
613 EXPORT_SYMBOL(qlogicfas408_get_chip_type);
614 EXPORT_SYMBOL(qlogicfas408_setup);
615 EXPORT_SYMBOL(qlogicfas408_detect);
616 EXPORT_SYMBOL(qlogicfas408_disable_ints);