drivers/w1/w1_io.c

   1 /*
   2  *      w1_io.c
   3  *
   4  * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
   5  *
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  20  */
  21
  22 #include <asm/io.h>
  23
  24 #include <linux/delay.h>
  25 #include <linux/moduleparam.h>
  26 #include <linux/module.h>
  27
  28 #include "w1.h"
  29 #include "w1_log.h"
  30
  31 static int w1_delay_parm = 1;
  32 module_param_named(delay_coef, w1_delay_parm, int, 0);
  33
  34 static u8 w1_crc8_table[] = {
  35         0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65,
  36         157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220,
  37         35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98,
  38         190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255,
  39         70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7,
  40         219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154,
  41         101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36,
  42         248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185,
  43         140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205,
  44         17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80,
  45         175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238,
  46         50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115,
  47         202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139,
  48         87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22,
  49         233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168,
  50         116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53
  51 };
  52
  53 static void w1_delay(unsigned long tm)
  54 {
  55         udelay(tm * w1_delay_parm);
  56 }
  57
  58 static void w1_write_bit(struct w1_master *dev, int bit);
  59 static u8 w1_read_bit(struct w1_master *dev);
  60
  61 /**
  62  * Generates a write-0 or write-1 cycle and samples the level.
  63  */
  64 static u8 w1_touch_bit(struct w1_master *dev, int bit)
  65 {
  66         if (dev->bus_master->touch_bit)
  67                 return dev->bus_master->touch_bit(dev->bus_master->data, bit);
  68         else if (bit)
  69                 return w1_read_bit(dev);
  70         else {
  71                 w1_write_bit(dev, 0);
  72                 return(0);
  73         }
  74 }
  75
  76 /**
  77  * Generates a write-0 or write-1 cycle.
  78  * Only call if dev->bus_master->touch_bit is NULL
  79  */
  80 static void w1_write_bit(struct w1_master *dev, int bit)
  81 {
  82         if (bit) {
  83                 dev->bus_master->write_bit(dev->bus_master->data, 0);
  84                 w1_delay(6);
  85                 dev->bus_master->write_bit(dev->bus_master->data, 1);
  86                 w1_delay(64);
  87         } else {
  88                 dev->bus_master->write_bit(dev->bus_master->data, 0);
  89                 w1_delay(60);
  90                 dev->bus_master->write_bit(dev->bus_master->data, 1);
  91                 w1_delay(10);
  92         }
  93 }
  94
  95 /**
  96  * Pre-write operation, currently only supporting strong pullups.
  97  * Program the hardware for a strong pullup, if one has been requested and
  98  * the hardware supports it.
  99  *
 100  * @param dev     the master device
 101  */
 102 static void w1_pre_write(struct w1_master *dev)
 103 {
 104         if (dev->pullup_duration &&
 105                 dev->enable_pullup && dev->bus_master->set_pullup) {
 106                 dev->bus_master->set_pullup(dev->bus_master->data,
 107                         dev->pullup_duration);
 108         }
 109 }
 110
 111 /**
 112  * Post-write operation, currently only supporting strong pullups.
 113  * If a strong pullup was requested, clear it if the hardware supports
 114  * them, or execute the delay otherwise, in either case clear the request.
 115  *
 116  * @param dev     the master device
 117  */
 118 static void w1_post_write(struct w1_master *dev)
 119 {
 120         if (dev->pullup_duration) {
 121                 if (dev->enable_pullup && dev->bus_master->set_pullup)
 122                         dev->bus_master->set_pullup(dev->bus_master->data, 0);
 123                 else
 124                         msleep(dev->pullup_duration);
 125                 dev->pullup_duration = 0;
 126         }
 127 }
 128
 129 /**
 130  * Writes 8 bits.
 131  *
 132  * @param dev     the master device
 133  * @param byte    the byte to write
 134  */
 135 void w1_write_8(struct w1_master *dev, u8 byte)
 136 {
 137         int i;
 138
 139         if (dev->bus_master->write_byte) {
 140                 w1_pre_write(dev);
 141                 dev->bus_master->write_byte(dev->bus_master->data, byte);
 142         }
 143         else
 144                 for (i = 0; i < 8; ++i) {
 145                         if (i == 7)
 146                                 w1_pre_write(dev);
 147                         w1_touch_bit(dev, (byte >> i) & 0x1);
 148                 }
 149         w1_post_write(dev);
 150 }
 151 EXPORT_SYMBOL_GPL(w1_write_8);
 152
 153
 154 /**
 155  * Generates a write-1 cycle and samples the level.
 156  * Only call if dev->bus_master->touch_bit is NULL
 157  */
 158 static u8 w1_read_bit(struct w1_master *dev)
 159 {
 160         int result;
 161
 162         dev->bus_master->write_bit(dev->bus_master->data, 0);
 163         w1_delay(6);
 164         dev->bus_master->write_bit(dev->bus_master->data, 1);
 165         w1_delay(9);
 166
 167         result = dev->bus_master->read_bit(dev->bus_master->data);
 168         w1_delay(55);
 169
 170         return result & 0x1;
 171 }
 172
 173 /**
 174  * Does a triplet - used for searching ROM addresses.
 175  * Return bits:
 176  *  bit 0 = id_bit
 177  *  bit 1 = comp_bit
 178  *  bit 2 = dir_taken
 179  * If both bits 0 & 1 are set, the search should be restarted.
 180  *
 181  * @param dev     the master device
 182  * @param bdir    the bit to write if both id_bit and comp_bit are 0
 183  * @return        bit fields - see above
 184  */
 185 u8 w1_triplet(struct w1_master *dev, int bdir)
 186 {
 187         if ( dev->bus_master->triplet )
 188                 return(dev->bus_master->triplet(dev->bus_master->data, bdir));
 189         else {
 190                 u8 id_bit   = w1_touch_bit(dev, 1);
 191                 u8 comp_bit = w1_touch_bit(dev, 1);
 192                 u8 retval;
 193
 194                 if ( id_bit && comp_bit )
 195                         return(0x03);  /* error */
 196
 197                 if ( !id_bit && !comp_bit ) {
 198                         /* Both bits are valid, take the direction given */
 199                         retval = bdir ? 0x04 : 0;
 200                 } else {
 201                         /* Only one bit is valid, take that direction */
 202                         bdir = id_bit;
 203                         retval = id_bit ? 0x05 : 0x02;
 204                 }
 205
 206                 if ( dev->bus_master->touch_bit )
 207                         w1_touch_bit(dev, bdir);
 208                 else
 209                         w1_write_bit(dev, bdir);
 210                 return(retval);
 211         }
 212 }
 213
 214 /**
 215  * Reads 8 bits.
 216  *
 217  * @param dev     the master device
 218  * @return        the byte read
 219  */
 220 static u8 w1_read_8(struct w1_master * dev)
 221 {
 222         int i;
 223         u8 res = 0;
 224
 225         if (dev->bus_master->read_byte)
 226                 res = dev->bus_master->read_byte(dev->bus_master->data);
 227         else
 228                 for (i = 0; i < 8; ++i)
 229                         res |= (w1_touch_bit(dev,1) << i);
 230
 231         return res;
 232 }
 233
 234 /**
 235  * Writes a series of bytes.
 236  *
 237  * @param dev     the master device
 238  * @param buf     pointer to the data to write
 239  * @param len     the number of bytes to write
 240  * @return        the byte read
 241  */
 242 void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
 243 {
 244         int i;
 245
 246         if (dev->bus_master->write_block) {
 247                 w1_pre_write(dev);
 248                 dev->bus_master->write_block(dev->bus_master->data, buf, len);
 249         }
 250         else
 251                 for (i = 0; i < len; ++i)
 252                         w1_write_8(dev, buf[i]); /* calls w1_pre_write */
 253         w1_post_write(dev);
 254 }
 255 EXPORT_SYMBOL_GPL(w1_write_block);
 256
 257 /**
 258  * Reads a series of bytes.
 259  *
 260  * @param dev     the master device
 261  * @param buf     pointer to the buffer to fill
 262  * @param len     the number of bytes to read
 263  * @return        the number of bytes read
 264  */
 265 u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
 266 {
 267         int i;
 268         u8 ret;
 269
 270         if (dev->bus_master->read_block)
 271                 ret = dev->bus_master->read_block(dev->bus_master->data, buf, len);
 272         else {
 273                 for (i = 0; i < len; ++i)
 274                         buf[i] = w1_read_8(dev);
 275                 ret = len;
 276         }
 277
 278         return ret;
 279 }
 280 EXPORT_SYMBOL_GPL(w1_read_block);
 281
 282 /**
 283  * Issues a reset bus sequence.
 284  *
 285  * @param  dev The bus master pointer
 286  * @return     0=Device present, 1=No device present or error
 287  */
 288 int w1_reset_bus(struct w1_master *dev)
 289 {
 290         int result;
 291
 292         if (dev->bus_master->reset_bus)
 293                 result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1;
 294         else {
 295                 dev->bus_master->write_bit(dev->bus_master->data, 0);
 296                 /* minimum 480, max ? us
 297                  * be nice and sleep, except 18b20 spec lists 960us maximum,
 298                  * so until we can sleep with microsecond accuracy, spin.
 299                  * Feel free to come up with some other way to give up the
 300                  * cpu for such a short amount of time AND get it back in
 301                  * the maximum amount of time.
 302                  */
 303                 w1_delay(480);
 304                 dev->bus_master->write_bit(dev->bus_master->data, 1);
 305                 w1_delay(70);
 306
 307                 result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1;
 308                 /* minmum 70 (above) + 410 = 480 us
 309                  * There aren't any timing requirements between a reset and
 310                  * the following transactions.  Sleeping is safe here.
 311                  */
 312                 /* w1_delay(410); min required time */
 313                 msleep(1);
 314         }
 315
 316         return result;
 317 }
 318 EXPORT_SYMBOL_GPL(w1_reset_bus);
 319
 320 u8 w1_calc_crc8(u8 * data, int len)
 321 {
 322         u8 crc = 0;
 323
 324         while (len--)
 325                 crc = w1_crc8_table[crc ^ *data++];
 326
 327         return crc;
 328 }
 329 EXPORT_SYMBOL_GPL(w1_calc_crc8);
 330
 331 void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb)
 332 {
 333         dev->attempts++;
 334         if (dev->bus_master->search)
 335                 dev->bus_master->search(dev->bus_master->data, dev,
 336                         search_type, cb);
 337         else
 338                 w1_search(dev, search_type, cb);
 339 }
 340
 341 /**
 342  * Resets the bus and then selects the slave by sending either a skip rom
 343  * or a rom match.
 344  * The w1 master lock must be held.
 345  *
 346  * @param sl    the slave to select
 347  * @return      0=success, anything else=error
 348  */
 349 int w1_reset_select_slave(struct w1_slave *sl)
 350 {
 351         if (w1_reset_bus(sl->master))
 352                 return -1;
 353
 354         if (sl->master->slave_count == 1)
 355                 w1_write_8(sl->master, W1_SKIP_ROM);
 356         else {
 357                 u8 match[9] = {W1_MATCH_ROM, };
 358                 memcpy(&match[1], (u8 *)&sl->reg_num, 8);
 359                 w1_write_block(sl->master, match, 9);
 360         }
 361         return 0;
 362 }
 363 EXPORT_SYMBOL_GPL(w1_reset_select_slave);
 364
 365 /**
 366  * Put out a strong pull-up of the specified duration after the next write
 367  * operation.  Not all hardware supports strong pullups.  Hardware that
 368  * doesn't support strong pullups will sleep for the given time after the
 369  * write operation without a strong pullup.  This is a one shot request for
 370  * the next write, specifying zero will clear a previous request.
 371  * The w1 master lock must be held.
 372  *
 373  * @param delay time in milliseconds
 374  * @return      0=success, anything else=error
 375  */
 376 void w1_next_pullup(struct w1_master *dev, int delay)
 377 {
 378         dev->pullup_duration = delay;
 379 }
 380 EXPORT_SYMBOL_GPL(w1_next_pullup);