hwmon: (pmbus) Increase attribute name size
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / fsl_pq_mdio.c
blob52f4e8ad48e77c84b8bd4ed9cd52faa3f5adb419
1 /*
2 * Freescale PowerQUICC Ethernet Driver -- MIIM bus implementation
3 * Provides Bus interface for MIIM regs
5 * Author: Andy Fleming <afleming@freescale.com>
6 * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
8 * Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc.
10 * Based on gianfar_mii.c and ucc_geth_mii.c (Li Yang, Kim Phillips)
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
19 #include <linux/kernel.h>
20 #include <linux/string.h>
21 #include <linux/errno.h>
22 #include <linux/unistd.h>
23 #include <linux/slab.h>
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/netdevice.h>
28 #include <linux/etherdevice.h>
29 #include <linux/skbuff.h>
30 #include <linux/spinlock.h>
31 #include <linux/mm.h>
32 #include <linux/module.h>
33 #include <linux/platform_device.h>
34 #include <linux/crc32.h>
35 #include <linux/mii.h>
36 #include <linux/phy.h>
37 #include <linux/of.h>
38 #include <linux/of_address.h>
39 #include <linux/of_mdio.h>
40 #include <linux/of_platform.h>
42 #include <asm/io.h>
43 #include <asm/irq.h>
44 #include <asm/uaccess.h>
45 #include <asm/ucc.h>
47 #include "gianfar.h"
48 #include "fsl_pq_mdio.h"
50 struct fsl_pq_mdio_priv {
51 void __iomem *map;
52 struct fsl_pq_mdio __iomem *regs;
56 * Write value to the PHY at mii_id at register regnum,
57 * on the bus attached to the local interface, which may be different from the
58 * generic mdio bus (tied to a single interface), waiting until the write is
59 * done before returning. This is helpful in programming interfaces like
60 * the TBI which control interfaces like onchip SERDES and are always tied to
61 * the local mdio pins, which may not be the same as system mdio bus, used for
62 * controlling the external PHYs, for example.
64 int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
65 int regnum, u16 value)
67 /* Set the PHY address and the register address we want to write */
68 out_be32(&regs->miimadd, (mii_id << 8) | regnum);
70 /* Write out the value we want */
71 out_be32(&regs->miimcon, value);
73 /* Wait for the transaction to finish */
74 while (in_be32(&regs->miimind) & MIIMIND_BUSY)
75 cpu_relax();
77 return 0;
81 * Read the bus for PHY at addr mii_id, register regnum, and
82 * return the value. Clears miimcom first. All PHY operation
83 * done on the bus attached to the local interface,
84 * which may be different from the generic mdio bus
85 * This is helpful in programming interfaces like
86 * the TBI which, in turn, control interfaces like onchip SERDES
87 * and are always tied to the local mdio pins, which may not be the
88 * same as system mdio bus, used for controlling the external PHYs, for eg.
90 int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs,
91 int mii_id, int regnum)
93 u16 value;
95 /* Set the PHY address and the register address we want to read */
96 out_be32(&regs->miimadd, (mii_id << 8) | regnum);
98 /* Clear miimcom, and then initiate a read */
99 out_be32(&regs->miimcom, 0);
100 out_be32(&regs->miimcom, MII_READ_COMMAND);
102 /* Wait for the transaction to finish */
103 while (in_be32(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
104 cpu_relax();
106 /* Grab the value of the register from miimstat */
107 value = in_be32(&regs->miimstat);
109 return value;
112 static struct fsl_pq_mdio __iomem *fsl_pq_mdio_get_regs(struct mii_bus *bus)
114 struct fsl_pq_mdio_priv *priv = bus->priv;
116 return priv->regs;
120 * Write value to the PHY at mii_id at register regnum,
121 * on the bus, waiting until the write is done before returning.
123 int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
125 struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
127 /* Write to the local MII regs */
128 return fsl_pq_local_mdio_write(regs, mii_id, regnum, value);
132 * Read the bus for PHY at addr mii_id, register regnum, and
133 * return the value. Clears miimcom first.
135 int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
137 struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
139 /* Read the local MII regs */
140 return fsl_pq_local_mdio_read(regs, mii_id, regnum);
143 /* Reset the MIIM registers, and wait for the bus to free */
144 static int fsl_pq_mdio_reset(struct mii_bus *bus)
146 struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
147 int timeout = PHY_INIT_TIMEOUT;
149 mutex_lock(&bus->mdio_lock);
151 /* Reset the management interface */
152 out_be32(&regs->miimcfg, MIIMCFG_RESET);
154 /* Setup the MII Mgmt clock speed */
155 out_be32(&regs->miimcfg, MIIMCFG_INIT_VALUE);
157 /* Wait until the bus is free */
158 while ((in_be32(&regs->miimind) & MIIMIND_BUSY) && timeout--)
159 cpu_relax();
161 mutex_unlock(&bus->mdio_lock);
163 if (timeout < 0) {
164 printk(KERN_ERR "%s: The MII Bus is stuck!\n",
165 bus->name);
166 return -EBUSY;
169 return 0;
172 void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
174 const u32 *addr;
175 u64 taddr = OF_BAD_ADDR;
177 addr = of_get_address(np, 0, NULL, NULL);
178 if (addr)
179 taddr = of_translate_address(np, addr);
181 snprintf(name, MII_BUS_ID_SIZE, "%s@%llx", np->name,
182 (unsigned long long)taddr);
184 EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name);
186 /* Scan the bus in reverse, looking for an empty spot */
187 static int fsl_pq_mdio_find_free(struct mii_bus *new_bus)
189 int i;
191 for (i = PHY_MAX_ADDR; i > 0; i--) {
192 u32 phy_id;
194 if (get_phy_id(new_bus, i, &phy_id))
195 return -1;
197 if (phy_id == 0xffffffff)
198 break;
201 return i;
205 #if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
206 static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
208 struct gfar __iomem *enet_regs;
211 * This is mildly evil, but so is our hardware for doing this.
212 * Also, we have to cast back to struct gfar because of
213 * definition weirdness done in gianfar.h.
215 if(of_device_is_compatible(np, "fsl,gianfar-mdio") ||
216 of_device_is_compatible(np, "fsl,gianfar-tbi") ||
217 of_device_is_compatible(np, "gianfar")) {
218 enet_regs = (struct gfar __iomem *)regs;
219 return &enet_regs->tbipa;
220 } else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
221 of_device_is_compatible(np, "fsl,etsec2-tbi")) {
222 return of_iomap(np, 1);
223 } else
224 return NULL;
226 #endif
229 #if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
230 static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
232 struct device_node *np = NULL;
233 int err = 0;
235 for_each_compatible_node(np, NULL, "ucc_geth") {
236 struct resource tempres;
238 err = of_address_to_resource(np, 0, &tempres);
239 if (err)
240 continue;
242 /* if our mdio regs fall within this UCC regs range */
243 if ((start >= tempres.start) && (end <= tempres.end)) {
244 /* Find the id of the UCC */
245 const u32 *id;
247 id = of_get_property(np, "cell-index", NULL);
248 if (!id) {
249 id = of_get_property(np, "device-id", NULL);
250 if (!id)
251 continue;
254 *ucc_id = *id;
256 return 0;
260 if (err)
261 return err;
262 else
263 return -EINVAL;
265 #endif
268 static int fsl_pq_mdio_probe(struct platform_device *ofdev)
270 struct device_node *np = ofdev->dev.of_node;
271 struct device_node *tbi;
272 struct fsl_pq_mdio_priv *priv;
273 struct fsl_pq_mdio __iomem *regs = NULL;
274 void __iomem *map;
275 u32 __iomem *tbipa;
276 struct mii_bus *new_bus;
277 int tbiaddr = -1;
278 const u32 *addrp;
279 u64 addr = 0, size = 0;
280 int err;
282 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
283 if (!priv)
284 return -ENOMEM;
286 new_bus = mdiobus_alloc();
287 if (!new_bus) {
288 err = -ENOMEM;
289 goto err_free_priv;
292 new_bus->name = "Freescale PowerQUICC MII Bus",
293 new_bus->read = &fsl_pq_mdio_read,
294 new_bus->write = &fsl_pq_mdio_write,
295 new_bus->reset = &fsl_pq_mdio_reset,
296 new_bus->priv = priv;
297 fsl_pq_mdio_bus_name(new_bus->id, np);
299 addrp = of_get_address(np, 0, &size, NULL);
300 if (!addrp) {
301 err = -EINVAL;
302 goto err_free_bus;
305 /* Set the PHY base address */
306 addr = of_translate_address(np, addrp);
307 if (addr == OF_BAD_ADDR) {
308 err = -EINVAL;
309 goto err_free_bus;
312 map = ioremap(addr, size);
313 if (!map) {
314 err = -ENOMEM;
315 goto err_free_bus;
317 priv->map = map;
319 if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
320 of_device_is_compatible(np, "fsl,gianfar-tbi") ||
321 of_device_is_compatible(np, "fsl,ucc-mdio") ||
322 of_device_is_compatible(np, "ucc_geth_phy"))
323 map -= offsetof(struct fsl_pq_mdio, miimcfg);
324 regs = map;
325 priv->regs = regs;
327 new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
329 if (NULL == new_bus->irq) {
330 err = -ENOMEM;
331 goto err_unmap_regs;
334 new_bus->parent = &ofdev->dev;
335 dev_set_drvdata(&ofdev->dev, new_bus);
337 if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
338 of_device_is_compatible(np, "fsl,gianfar-tbi") ||
339 of_device_is_compatible(np, "fsl,etsec2-mdio") ||
340 of_device_is_compatible(np, "fsl,etsec2-tbi") ||
341 of_device_is_compatible(np, "gianfar")) {
342 #if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
343 tbipa = get_gfar_tbipa(regs, np);
344 if (!tbipa) {
345 err = -EINVAL;
346 goto err_free_irqs;
348 #else
349 err = -ENODEV;
350 goto err_free_irqs;
351 #endif
352 } else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
353 of_device_is_compatible(np, "ucc_geth_phy")) {
354 #if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
355 u32 id;
356 static u32 mii_mng_master;
358 tbipa = &regs->utbipar;
360 if ((err = get_ucc_id_for_range(addr, addr + size, &id)))
361 goto err_free_irqs;
363 if (!mii_mng_master) {
364 mii_mng_master = id;
365 ucc_set_qe_mux_mii_mng(id - 1);
367 #else
368 err = -ENODEV;
369 goto err_free_irqs;
370 #endif
371 } else {
372 err = -ENODEV;
373 goto err_free_irqs;
376 for_each_child_of_node(np, tbi) {
377 if (!strncmp(tbi->type, "tbi-phy", 8))
378 break;
381 if (tbi) {
382 const u32 *prop = of_get_property(tbi, "reg", NULL);
384 if (prop)
385 tbiaddr = *prop;
388 if (tbiaddr == -1) {
389 out_be32(tbipa, 0);
391 tbiaddr = fsl_pq_mdio_find_free(new_bus);
395 * We define TBIPA at 0 to be illegal, opting to fail for boards that
396 * have PHYs at 1-31, rather than change tbipa and rescan.
398 if (tbiaddr == 0) {
399 err = -EBUSY;
401 goto err_free_irqs;
404 out_be32(tbipa, tbiaddr);
406 err = of_mdiobus_register(new_bus, np);
407 if (err) {
408 printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
409 new_bus->name);
410 goto err_free_irqs;
413 return 0;
415 err_free_irqs:
416 kfree(new_bus->irq);
417 err_unmap_regs:
418 iounmap(priv->map);
419 err_free_bus:
420 kfree(new_bus);
421 err_free_priv:
422 kfree(priv);
423 return err;
427 static int fsl_pq_mdio_remove(struct platform_device *ofdev)
429 struct device *device = &ofdev->dev;
430 struct mii_bus *bus = dev_get_drvdata(device);
431 struct fsl_pq_mdio_priv *priv = bus->priv;
433 mdiobus_unregister(bus);
435 dev_set_drvdata(device, NULL);
437 iounmap(priv->map);
438 bus->priv = NULL;
439 mdiobus_free(bus);
440 kfree(priv);
442 return 0;
445 static struct of_device_id fsl_pq_mdio_match[] = {
447 .type = "mdio",
448 .compatible = "ucc_geth_phy",
451 .type = "mdio",
452 .compatible = "gianfar",
455 .compatible = "fsl,ucc-mdio",
458 .compatible = "fsl,gianfar-tbi",
461 .compatible = "fsl,gianfar-mdio",
464 .compatible = "fsl,etsec2-tbi",
467 .compatible = "fsl,etsec2-mdio",
471 MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match);
473 static struct platform_driver fsl_pq_mdio_driver = {
474 .driver = {
475 .name = "fsl-pq_mdio",
476 .owner = THIS_MODULE,
477 .of_match_table = fsl_pq_mdio_match,
479 .probe = fsl_pq_mdio_probe,
480 .remove = fsl_pq_mdio_remove,
483 int __init fsl_pq_mdio_init(void)
485 return platform_driver_register(&fsl_pq_mdio_driver);
487 module_init(fsl_pq_mdio_init);
489 void fsl_pq_mdio_exit(void)
491 platform_driver_unregister(&fsl_pq_mdio_driver);
493 module_exit(fsl_pq_mdio_exit);
494 MODULE_LICENSE("GPL");