?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
hwmon: (pmbus) Increase attribute name size
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / 8139too.c
blobe3bad8247fd1b237c93bb210b02480d11a1f9e94
1 /*
2
3 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
4
5 Maintained by Jeff Garzik <jgarzik@pobox.com>
6 Copyright 2000-2002 Jeff Garzik
7
8 Much code comes from Donald Becker's rtl8139.c driver,
9 versions 1.13 and older. This driver was originally based
10 on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
11
12 -----<snip>-----
13
14 Written 1997-2001 by Donald Becker.
15 This software may be used and distributed according to the
16 terms of the GNU General Public License (GPL), incorporated
17 herein by reference. Drivers based on or derived from this
18 code fall under the GPL and must retain the authorship,
19 copyright and license notice. This file is not a complete
20 program and may only be used when the entire operating
21 system is licensed under the GPL.
22
23 This driver is for boards based on the RTL8129 and RTL8139
24 PCI ethernet chips.
25
26 The author may be reached as becker@scyld.com, or C/O Scyld
27 Computing Corporation 410 Severn Ave., Suite 210 Annapolis
28 MD 21403
29
30 Support and updates available at
31 http://www.scyld.com/network/rtl8139.html
32
33 Twister-tuning table provided by Kinston
34 <shangh@realtek.com.tw>.
35
36 -----<snip>-----
37
38 This software may be used and distributed according to the terms
39 of the GNU General Public License, incorporated herein by reference.
40
41 Contributors:
42
43 Donald Becker - he wrote the original driver, kudos to him!
44 (but please don't e-mail him for support, this isn't his driver)
45
46 Tigran Aivazian - bug fixes, skbuff free cleanup
47
48 Martin Mares - suggestions for PCI cleanup
49
50 David S. Miller - PCI DMA and softnet updates
51
52 Ernst Gill - fixes ported from BSD driver
53
54 Daniel Kobras - identified specific locations of
55 posted MMIO write bugginess
56
57 Gerard Sharp - bug fix, testing and feedback
58
59 David Ford - Rx ring wrap fix
60
61 Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
62 to find and fix a crucial bug on older chipsets.
63
64 Donald Becker/Chris Butterworth/Marcus Westergren -
65 Noticed various Rx packet size-related buglets.
66
67 Santiago Garcia Mantinan - testing and feedback
68
69 Jens David - 2.2.x kernel backports
70
71 Martin Dennett - incredibly helpful insight on undocumented
72 features of the 8139 chips
73
74 Jean-Jacques Michel - bug fix
75
76 Tobias Ringström - Rx interrupt status checking suggestion
77
78 Andrew Morton - Clear blocked signals, avoid
79 buffer overrun setting current->comm.
80
81 Kalle Olavi Niemitalo - Wake-on-LAN ioctls
82
83 Robert Kuebel - Save kernel thread from dying on any signal.
84
85 Submitting bug reports:
86
87 "rtl8139-diag -mmmaaavvveefN" output
88 enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
89
90 */
91
92 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
93
94 #define DRV_NAME "8139too"
95 #define DRV_VERSION "0.9.28"
96
97
98 #include <linux/module.h>
99 #include <linux/kernel.h>
100 #include <linux/compiler.h>
101 #include <linux/pci.h>
102 #include <linux/init.h>
103 #include <linux/netdevice.h>
104 #include <linux/etherdevice.h>
105 #include <linux/rtnetlink.h>
106 #include <linux/delay.h>
107 #include <linux/ethtool.h>
108 #include <linux/mii.h>
109 #include <linux/completion.h>
110 #include <linux/crc32.h>
111 #include <linux/io.h>
112 #include <linux/uaccess.h>
113 #include <linux/gfp.h>
114 #include <asm/irq.h>
115
116 #define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
117
118 /* Default Message level */
119 #define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
120 NETIF_MSG_PROBE | \
121 NETIF_MSG_LINK)
122
123
124 /* define to 1, 2 or 3 to enable copious debugging info */
125 #define RTL8139_DEBUG 0
126
127 /* define to 1 to disable lightweight runtime debugging checks */
128 #undef RTL8139_NDEBUG
129
130
131 #ifdef RTL8139_NDEBUG
132 # define assert(expr) do {} while (0)
133 #else
134 # define assert(expr) \
135 if (unlikely(!(expr))) { \
136 pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
137 #expr, __FILE__, __func__, __LINE__); \
138 }
139 #endif
140
141
142 /* A few user-configurable values. */
143 /* media options */
144 #define MAX_UNITS 8
145 static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
146 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
147
148 /* Whether to use MMIO or PIO. Default to MMIO. */
149 #ifdef CONFIG_8139TOO_PIO
150 static int use_io = 1;
151 #else
152 static int use_io = 0;
153 #endif
154
155 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
156 The RTL chips use a 64 element hash table based on the Ethernet CRC. */
157 static int multicast_filter_limit = 32;
158
159 /* bitmapped message enable number */
160 static int debug = -1;
161
162 /*
163 * Receive ring size
164 * Warning: 64K ring has hardware issues and may lock up.
165 */
166 #if defined(CONFIG_SH_DREAMCAST)
167 #define RX_BUF_IDX 0 /* 8K ring */
168 #else
169 #define RX_BUF_IDX 2 /* 32K ring */
170 #endif
171 #define RX_BUF_LEN (8192 << RX_BUF_IDX)
172 #define RX_BUF_PAD 16
173 #define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
174
175 #if RX_BUF_LEN == 65536
176 #define RX_BUF_TOT_LEN RX_BUF_LEN
177 #else
178 #define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
179 #endif
180
181 /* Number of Tx descriptor registers. */
182 #define NUM_TX_DESC 4
183
184 /* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
185 #define MAX_ETH_FRAME_SIZE 1536
186
187 /* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
188 #define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
189 #define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
190
191 /* PCI Tuning Parameters
192 Threshold is bytes transferred to chip before transmission starts. */
193 #define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
194
195 /* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
196 #define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
197 #define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
198 #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
199 #define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
200
201 /* Operational parameters that usually are not changed. */
202 /* Time in jiffies before concluding the transmitter is hung. */
203 #define TX_TIMEOUT (6*HZ)
204
205
206 enum {
207 HAS_MII_XCVR = 0x010000,
208 HAS_CHIP_XCVR = 0x020000,
209 HAS_LNK_CHNG = 0x040000,
210 };
211
212 #define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
213 #define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
214 #define RTL_MIN_IO_SIZE 0x80
215 #define RTL8139B_IO_SIZE 256
216
217 #define RTL8129_CAPS HAS_MII_XCVR
218 #define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
219
220 typedef enum {
221 RTL8139 = 0,
222 RTL8129,
223 } board_t;
224
225
226 /* indexed by board_t, above */
227 static const struct {
228 const char *name;
229 u32 hw_flags;
230 } board_info[] __devinitdata = {
231 { "RealTek RTL8139", RTL8139_CAPS },
232 { "RealTek RTL8129", RTL8129_CAPS },
233 };
234
235
236 static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {
237 {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
238 {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
239 {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
240 {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
241 {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
242 {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
243 {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
244 {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
245 {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
246 {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
247 {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
248 {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
249 {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
250 {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
251 {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
252 {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
253 {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
254 {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
255 {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
256
257 #ifdef CONFIG_SH_SECUREEDGE5410
258 /* Bogus 8139 silicon reports 8129 without external PROM :-( */
259 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
260 #endif
261 #ifdef CONFIG_8139TOO_8129
262 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
263 #endif
264
265 /* some crazy cards report invalid vendor ids like
266 * 0x0001 here. The other ids are valid and constant,
267 * so we simply don't match on the main vendor id.
268 */
269 {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
270 {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
271 {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
272
273 {0,}
274 };
275 MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
276
277 static struct {
278 const char str[ETH_GSTRING_LEN];
279 } ethtool_stats_keys[] = {
280 { "early_rx" },
281 { "tx_buf_mapped" },
282 { "tx_timeouts" },
283 { "rx_lost_in_ring" },
284 };
285
286 /* The rest of these values should never change. */
287
288 /* Symbolic offsets to registers. */
289 enum RTL8139_registers {
290 MAC0 = 0, /* Ethernet hardware address. */
291 MAR0 = 8, /* Multicast filter. */
292 TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
293 TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
294 RxBuf = 0x30,
295 ChipCmd = 0x37,
296 RxBufPtr = 0x38,
297 RxBufAddr = 0x3A,
298 IntrMask = 0x3C,
299 IntrStatus = 0x3E,
300 TxConfig = 0x40,
301 RxConfig = 0x44,
302 Timer = 0x48, /* A general-purpose counter. */
303 RxMissed = 0x4C, /* 24 bits valid, write clears. */
304 Cfg9346 = 0x50,
305 Config0 = 0x51,
306 Config1 = 0x52,
307 TimerInt = 0x54,
308 MediaStatus = 0x58,
309 Config3 = 0x59,
310 Config4 = 0x5A, /* absent on RTL-8139A */
311 HltClk = 0x5B,
312 MultiIntr = 0x5C,
313 TxSummary = 0x60,
314 BasicModeCtrl = 0x62,
315 BasicModeStatus = 0x64,
316 NWayAdvert = 0x66,
317 NWayLPAR = 0x68,
318 NWayExpansion = 0x6A,
319 /* Undocumented registers, but required for proper operation. */
320 FIFOTMS = 0x70, /* FIFO Control and test. */
321 CSCR = 0x74, /* Chip Status and Configuration Register. */
322 PARA78 = 0x78,
323 FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */
324 PARA7c = 0x7c, /* Magic transceiver parameter register. */
325 Config5 = 0xD8, /* absent on RTL-8139A */
326 };
327
328 enum ClearBitMasks {
329 MultiIntrClear = 0xF000,
330 ChipCmdClear = 0xE2,
331 Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
332 };
333
334 enum ChipCmdBits {
335 CmdReset = 0x10,
336 CmdRxEnb = 0x08,
337 CmdTxEnb = 0x04,
338 RxBufEmpty = 0x01,
339 };
340
341 /* Interrupt register bits, using my own meaningful names. */
342 enum IntrStatusBits {
343 PCIErr = 0x8000,
344 PCSTimeout = 0x4000,
345 RxFIFOOver = 0x40,
346 RxUnderrun = 0x20,
347 RxOverflow = 0x10,
348 TxErr = 0x08,
349 TxOK = 0x04,
350 RxErr = 0x02,
351 RxOK = 0x01,
352
353 RxAckBits = RxFIFOOver | RxOverflow | RxOK,
354 };
355
356 enum TxStatusBits {
357 TxHostOwns = 0x2000,
358 TxUnderrun = 0x4000,
359 TxStatOK = 0x8000,
360 TxOutOfWindow = 0x20000000,
361 TxAborted = 0x40000000,
362 TxCarrierLost = 0x80000000,
363 };
364 enum RxStatusBits {
365 RxMulticast = 0x8000,
366 RxPhysical = 0x4000,
367 RxBroadcast = 0x2000,
368 RxBadSymbol = 0x0020,
369 RxRunt = 0x0010,
370 RxTooLong = 0x0008,
371 RxCRCErr = 0x0004,
372 RxBadAlign = 0x0002,
373 RxStatusOK = 0x0001,
374 };
375
376 /* Bits in RxConfig. */
377 enum rx_mode_bits {
378 AcceptErr = 0x20,
379 AcceptRunt = 0x10,
380 AcceptBroadcast = 0x08,
381 AcceptMulticast = 0x04,
382 AcceptMyPhys = 0x02,
383 AcceptAllPhys = 0x01,
384 };
385
386 /* Bits in TxConfig. */
387 enum tx_config_bits {
388 /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
389 TxIFGShift = 24,
390 TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
391 TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
392 TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
393 TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
394
395 TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
396 TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */
397 TxClearAbt = (1 << 0), /* Clear abort (WO) */
398 TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */
399 TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */
400
401 TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
402 };
403
404 /* Bits in Config1 */
405 enum Config1Bits {
406 Cfg1_PM_Enable = 0x01,
407 Cfg1_VPD_Enable = 0x02,
408 Cfg1_PIO = 0x04,
409 Cfg1_MMIO = 0x08,
410 LWAKE = 0x10, /* not on 8139, 8139A */
411 Cfg1_Driver_Load = 0x20,
412 Cfg1_LED0 = 0x40,
413 Cfg1_LED1 = 0x80,
414 SLEEP = (1 << 1), /* only on 8139, 8139A */
415 PWRDN = (1 << 0), /* only on 8139, 8139A */
416 };
417
418 /* Bits in Config3 */
419 enum Config3Bits {
420 Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
421 Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
422 Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
423 Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
424 Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
425 Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
426 Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
427 Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
428 };
429
430 /* Bits in Config4 */
431 enum Config4Bits {
432 LWPTN = (1 << 2), /* not on 8139, 8139A */
433 };
434
435 /* Bits in Config5 */
436 enum Config5Bits {
437 Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
438 Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
439 Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
440 Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
441 Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
442 Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
443 Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
444 };
445
446 enum RxConfigBits {
447 /* rx fifo threshold */
448 RxCfgFIFOShift = 13,
449 RxCfgFIFONone = (7 << RxCfgFIFOShift),
450
451 /* Max DMA burst */
452 RxCfgDMAShift = 8,
453 RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
454
455 /* rx ring buffer length */
456 RxCfgRcv8K = 0,
457 RxCfgRcv16K = (1 << 11),
458 RxCfgRcv32K = (1 << 12),
459 RxCfgRcv64K = (1 << 11) | (1 << 12),
460
461 /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
462 RxNoWrap = (1 << 7),
463 };
464
465 /* Twister tuning parameters from RealTek.
466 Completely undocumented, but required to tune bad links on some boards. */
467 enum CSCRBits {
468 CSCR_LinkOKBit = 0x0400,
469 CSCR_LinkChangeBit = 0x0800,
470 CSCR_LinkStatusBits = 0x0f000,
471 CSCR_LinkDownOffCmd = 0x003c0,
472 CSCR_LinkDownCmd = 0x0f3c0,
473 };
474
475 enum Cfg9346Bits {
476 Cfg9346_Lock = 0x00,
477 Cfg9346_Unlock = 0xC0,
478 };
479
480 typedef enum {
481 CH_8139 = 0,
482 CH_8139_K,
483 CH_8139A,
484 CH_8139A_G,
485 CH_8139B,
486 CH_8130,
487 CH_8139C,
488 CH_8100,
489 CH_8100B_8139D,
490 CH_8101,
491 } chip_t;
492
493 enum chip_flags {
494 HasHltClk = (1 << 0),
495 HasLWake = (1 << 1),
496 };
497
498 #define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
499 (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
500 #define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
501
502 /* directly indexed by chip_t, above */
503 static const struct {
504 const char *name;
505 u32 version; /* from RTL8139C/RTL8139D docs */
506 u32 flags;
507 } rtl_chip_info[] = {
508 { "RTL-8139",
509 HW_REVID(1, 0, 0, 0, 0, 0, 0),
510 HasHltClk,
511 },
512
513 { "RTL-8139 rev K",
514 HW_REVID(1, 1, 0, 0, 0, 0, 0),
515 HasHltClk,
516 },
517
518 { "RTL-8139A",
519 HW_REVID(1, 1, 1, 0, 0, 0, 0),
520 HasHltClk, /* XXX undocumented? */
521 },
522
523 { "RTL-8139A rev G",
524 HW_REVID(1, 1, 1, 0, 0, 1, 0),
525 HasHltClk, /* XXX undocumented? */
526 },
527
528 { "RTL-8139B",
529 HW_REVID(1, 1, 1, 1, 0, 0, 0),
530 HasLWake,
531 },
532
533 { "RTL-8130",
534 HW_REVID(1, 1, 1, 1, 1, 0, 0),
535 HasLWake,
536 },
537
538 { "RTL-8139C",
539 HW_REVID(1, 1, 1, 0, 1, 0, 0),
540 HasLWake,
541 },
542
543 { "RTL-8100",
544 HW_REVID(1, 1, 1, 1, 0, 1, 0),
545 HasLWake,
546 },
547
548 { "RTL-8100B/8139D",
549 HW_REVID(1, 1, 1, 0, 1, 0, 1),
550 HasHltClk /* XXX undocumented? */
551 | HasLWake,
552 },
553
554 { "RTL-8101",
555 HW_REVID(1, 1, 1, 0, 1, 1, 1),
556 HasLWake,
557 },
558 };
559
560 struct rtl_extra_stats {
561 unsigned long early_rx;
562 unsigned long tx_buf_mapped;
563 unsigned long tx_timeouts;
564 unsigned long rx_lost_in_ring;
565 };
566
567 struct rtl8139_private {
568 void __iomem *mmio_addr;
569 int drv_flags;
570 struct pci_dev *pci_dev;
571 u32 msg_enable;
572 struct napi_struct napi;
573 struct net_device *dev;
574
575 unsigned char *rx_ring;
576 unsigned int cur_rx; /* RX buf index of next pkt */
577 dma_addr_t rx_ring_dma;
578
579 unsigned int tx_flag;
580 unsigned long cur_tx;
581 unsigned long dirty_tx;
582 unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
583 unsigned char *tx_bufs; /* Tx bounce buffer region. */
584 dma_addr_t tx_bufs_dma;
585
586 signed char phys[4]; /* MII device addresses. */
587
588 /* Twister tune state. */
589 char twistie, twist_row, twist_col;
590
591 unsigned int watchdog_fired : 1;
592 unsigned int default_port : 4; /* Last dev->if_port value. */
593 unsigned int have_thread : 1;
594
595 spinlock_t lock;
596 spinlock_t rx_lock;
597
598 chip_t chipset;
599 u32 rx_config;
600 struct rtl_extra_stats xstats;
601
602 struct delayed_work thread;
603
604 struct mii_if_info mii;
605 unsigned int regs_len;
606 unsigned long fifo_copy_timeout;
607 };
608
609 MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
610 MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
611 MODULE_LICENSE("GPL");
612 MODULE_VERSION(DRV_VERSION);
613
614 module_param(use_io, int, 0);
615 MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
616 module_param(multicast_filter_limit, int, 0);
617 module_param_array(media, int, NULL, 0);
618 module_param_array(full_duplex, int, NULL, 0);
619 module_param(debug, int, 0);
620 MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
621 MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
622 MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
623 MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
624
625 static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
626 static int rtl8139_open (struct net_device *dev);
627 static int mdio_read (struct net_device *dev, int phy_id, int location);
628 static void mdio_write (struct net_device *dev, int phy_id, int location,
629 int val);
630 static void rtl8139_start_thread(struct rtl8139_private *tp);
631 static void rtl8139_tx_timeout (struct net_device *dev);
632 static void rtl8139_init_ring (struct net_device *dev);
633 static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
634 struct net_device *dev);
635 #ifdef CONFIG_NET_POLL_CONTROLLER
636 static void rtl8139_poll_controller(struct net_device *dev);
637 #endif
638 static int rtl8139_set_mac_address(struct net_device *dev, void *p);
639 static int rtl8139_poll(struct napi_struct *napi, int budget);
640 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
641 static int rtl8139_close (struct net_device *dev);
642 static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
643 static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
644 static void rtl8139_set_rx_mode (struct net_device *dev);
645 static void __set_rx_mode (struct net_device *dev);
646 static void rtl8139_hw_start (struct net_device *dev);
647 static void rtl8139_thread (struct work_struct *work);
648 static void rtl8139_tx_timeout_task(struct work_struct *work);
649 static const struct ethtool_ops rtl8139_ethtool_ops;
650
651 /* write MMIO register, with flush */
652 /* Flush avoids rtl8139 bug w/ posted MMIO writes */
653 #define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
654 #define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
655 #define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
656
657 /* write MMIO register */
658 #define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
659 #define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
660 #define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
661
662 /* read MMIO register */
663 #define RTL_R8(reg) ioread8 (ioaddr + (reg))
664 #define RTL_R16(reg) ioread16 (ioaddr + (reg))
665 #define RTL_R32(reg) ioread32 (ioaddr + (reg))
666
667
668 static const u16 rtl8139_intr_mask =
669 PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
670 TxErr | TxOK | RxErr | RxOK;
671
672 static const u16 rtl8139_norx_intr_mask =
673 PCIErr | PCSTimeout | RxUnderrun |
674 TxErr | TxOK | RxErr ;
675
676 #if RX_BUF_IDX == 0
677 static const unsigned int rtl8139_rx_config =
678 RxCfgRcv8K | RxNoWrap |
679 (RX_FIFO_THRESH << RxCfgFIFOShift) |
680 (RX_DMA_BURST << RxCfgDMAShift);
681 #elif RX_BUF_IDX == 1
682 static const unsigned int rtl8139_rx_config =
683 RxCfgRcv16K | RxNoWrap |
684 (RX_FIFO_THRESH << RxCfgFIFOShift) |
685 (RX_DMA_BURST << RxCfgDMAShift);
686 #elif RX_BUF_IDX == 2
687 static const unsigned int rtl8139_rx_config =
688 RxCfgRcv32K | RxNoWrap |
689 (RX_FIFO_THRESH << RxCfgFIFOShift) |
690 (RX_DMA_BURST << RxCfgDMAShift);
691 #elif RX_BUF_IDX == 3
692 static const unsigned int rtl8139_rx_config =
693 RxCfgRcv64K |
694 (RX_FIFO_THRESH << RxCfgFIFOShift) |
695 (RX_DMA_BURST << RxCfgDMAShift);
696 #else
697 #error "Invalid configuration for 8139_RXBUF_IDX"
698 #endif
699
700 static const unsigned int rtl8139_tx_config =
701 TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
702
703 static void __rtl8139_cleanup_dev (struct net_device *dev)
704 {
705 struct rtl8139_private *tp = netdev_priv(dev);
706 struct pci_dev *pdev;
707
708 assert (dev != NULL);
709 assert (tp->pci_dev != NULL);
710 pdev = tp->pci_dev;
711
712 if (tp->mmio_addr)
713 pci_iounmap (pdev, tp->mmio_addr);
714
715 /* it's ok to call this even if we have no regions to free */
716 pci_release_regions (pdev);
717
718 free_netdev(dev);
719 pci_set_drvdata (pdev, NULL);
720 }
721
722
723 static void rtl8139_chip_reset (void __iomem *ioaddr)
724 {
725 int i;
726
727 /* Soft reset the chip. */
728 RTL_W8 (ChipCmd, CmdReset);
729
730 /* Check that the chip has finished the reset. */
731 for (i = 1000; i > 0; i--) {
732 barrier();
733 if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
734 break;
735 udelay (10);
736 }
737 }
738
739
740 static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
741 {
742 void __iomem *ioaddr;
743 struct net_device *dev;
744 struct rtl8139_private *tp;
745 u8 tmp8;
746 int rc, disable_dev_on_err = 0;
747 unsigned int i;
748 unsigned long pio_start, pio_end, pio_flags, pio_len;
749 unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
750 u32 version;
751
752 assert (pdev != NULL);
753
754 /* dev and priv zeroed in alloc_etherdev */
755 dev = alloc_etherdev (sizeof (*tp));
756 if (dev == NULL) {
757 dev_err(&pdev->dev, "Unable to alloc new net device\n");
758 return ERR_PTR(-ENOMEM);
759 }
760 SET_NETDEV_DEV(dev, &pdev->dev);
761
762 tp = netdev_priv(dev);
763 tp->pci_dev = pdev;
764
765 /* enable device (incl. PCI PM wakeup and hotplug setup) */
766 rc = pci_enable_device (pdev);
767 if (rc)
768 goto err_out;
769
770 pio_start = pci_resource_start (pdev, 0);
771 pio_end = pci_resource_end (pdev, 0);
772 pio_flags = pci_resource_flags (pdev, 0);
773 pio_len = pci_resource_len (pdev, 0);
774
775 mmio_start = pci_resource_start (pdev, 1);
776 mmio_end = pci_resource_end (pdev, 1);
777 mmio_flags = pci_resource_flags (pdev, 1);
778 mmio_len = pci_resource_len (pdev, 1);
779
780 /* set this immediately, we need to know before
781 * we talk to the chip directly */
782 pr_debug("PIO region size == 0x%02lX\n", pio_len);
783 pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
784
785 retry:
786 if (use_io) {
787 /* make sure PCI base addr 0 is PIO */
788 if (!(pio_flags & IORESOURCE_IO)) {
789 dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
790 rc = -ENODEV;
791 goto err_out;
792 }
793 /* check for weird/broken PCI region reporting */
794 if (pio_len < RTL_MIN_IO_SIZE) {
795 dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
796 rc = -ENODEV;
797 goto err_out;
798 }
799 } else {
800 /* make sure PCI base addr 1 is MMIO */
801 if (!(mmio_flags & IORESOURCE_MEM)) {
802 dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
803 rc = -ENODEV;
804 goto err_out;
805 }
806 if (mmio_len < RTL_MIN_IO_SIZE) {
807 dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
808 rc = -ENODEV;
809 goto err_out;
810 }
811 }
812
813 rc = pci_request_regions (pdev, DRV_NAME);
814 if (rc)
815 goto err_out;
816 disable_dev_on_err = 1;
817
818 /* enable PCI bus-mastering */
819 pci_set_master (pdev);
820
821 if (use_io) {
822 ioaddr = pci_iomap(pdev, 0, 0);
823 if (!ioaddr) {
824 dev_err(&pdev->dev, "cannot map PIO, aborting\n");
825 rc = -EIO;
826 goto err_out;
827 }
828 dev->base_addr = pio_start;
829 tp->regs_len = pio_len;
830 } else {
831 /* ioremap MMIO region */
832 ioaddr = pci_iomap(pdev, 1, 0);
833 if (ioaddr == NULL) {
834 dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
835 pci_release_regions(pdev);
836 use_io = 1;
837 goto retry;
838 }
839 dev->base_addr = (long) ioaddr;
840 tp->regs_len = mmio_len;
841 }
842 tp->mmio_addr = ioaddr;
843
844 /* Bring old chips out of low-power mode. */
845 RTL_W8 (HltClk, 'R');
846
847 /* check for missing/broken hardware */
848 if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
849 dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
850 rc = -EIO;
851 goto err_out;
852 }
853
854 /* identify chip attached to board */
855 version = RTL_R32 (TxConfig) & HW_REVID_MASK;
856 for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
857 if (version == rtl_chip_info[i].version) {
858 tp->chipset = i;
859 goto match;
860 }
861
862 /* if unknown chip, assume array element #0, original RTL-8139 in this case */
863 i = 0;
864 dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
865 dev_dbg(&pdev->dev, "TxConfig = 0x%x\n", RTL_R32 (TxConfig));
866 tp->chipset = 0;
867
868 match:
869 pr_debug("chipset id (%d) == index %d, '%s'\n",
870 version, i, rtl_chip_info[i].name);
871
872 if (tp->chipset >= CH_8139B) {
873 u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
874 pr_debug("PCI PM wakeup\n");
875 if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
876 (tmp8 & LWAKE))
877 new_tmp8 &= ~LWAKE;
878 new_tmp8 |= Cfg1_PM_Enable;
879 if (new_tmp8 != tmp8) {
880 RTL_W8 (Cfg9346, Cfg9346_Unlock);
881 RTL_W8 (Config1, tmp8);
882 RTL_W8 (Cfg9346, Cfg9346_Lock);
883 }
884 if (rtl_chip_info[tp->chipset].flags & HasLWake) {
885 tmp8 = RTL_R8 (Config4);
886 if (tmp8 & LWPTN) {
887 RTL_W8 (Cfg9346, Cfg9346_Unlock);
888 RTL_W8 (Config4, tmp8 & ~LWPTN);
889 RTL_W8 (Cfg9346, Cfg9346_Lock);
890 }
891 }
892 } else {
893 pr_debug("Old chip wakeup\n");
894 tmp8 = RTL_R8 (Config1);
895 tmp8 &= ~(SLEEP | PWRDN);
896 RTL_W8 (Config1, tmp8);
897 }
898
899 rtl8139_chip_reset (ioaddr);
900
901 return dev;
902
903 err_out:
904 __rtl8139_cleanup_dev (dev);
905 if (disable_dev_on_err)
906 pci_disable_device (pdev);
907 return ERR_PTR(rc);
908 }
909
910 static const struct net_device_ops rtl8139_netdev_ops = {
911 .ndo_open = rtl8139_open,
912 .ndo_stop = rtl8139_close,
913 .ndo_get_stats = rtl8139_get_stats,
914 .ndo_change_mtu = eth_change_mtu,
915 .ndo_validate_addr = eth_validate_addr,
916 .ndo_set_mac_address = rtl8139_set_mac_address,
917 .ndo_start_xmit = rtl8139_start_xmit,
918 .ndo_set_multicast_list = rtl8139_set_rx_mode,
919 .ndo_do_ioctl = netdev_ioctl,
920 .ndo_tx_timeout = rtl8139_tx_timeout,
921 #ifdef CONFIG_NET_POLL_CONTROLLER
922 .ndo_poll_controller = rtl8139_poll_controller,
923 #endif
924 };
925
926 static int __devinit rtl8139_init_one (struct pci_dev *pdev,
927 const struct pci_device_id *ent)
928 {
929 struct net_device *dev = NULL;
930 struct rtl8139_private *tp;
931 int i, addr_len, option;
932 void __iomem *ioaddr;
933 static int board_idx = -1;
934
935 assert (pdev != NULL);
936 assert (ent != NULL);
937
938 board_idx++;
939
940 /* when we're built into the kernel, the driver version message
941 * is only printed if at least one 8139 board has been found
942 */
943 #ifndef MODULE
944 {
945 static int printed_version;
946 if (!printed_version++)
947 pr_info(RTL8139_DRIVER_NAME "\n");
948 }
949 #endif
950
951 if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
952 pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
953 dev_info(&pdev->dev,
954 "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
955 pdev->vendor, pdev->device, pdev->revision);
956 return -ENODEV;
957 }
958
959 if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
960 pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
961 pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
962 pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
963 pr_info("OQO Model 2 detected. Forcing PIO\n");
964 use_io = 1;
965 }
966
967 dev = rtl8139_init_board (pdev);
968 if (IS_ERR(dev))
969 return PTR_ERR(dev);
970
971 assert (dev != NULL);
972 tp = netdev_priv(dev);
973 tp->dev = dev;
974
975 ioaddr = tp->mmio_addr;
976 assert (ioaddr != NULL);
977
978 addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
979 for (i = 0; i < 3; i++)
980 ((__le16 *) (dev->dev_addr))[i] =
981 cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
982 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
983
984 /* The Rtl8139-specific entries in the device structure. */
985 dev->netdev_ops = &rtl8139_netdev_ops;
986 dev->ethtool_ops = &rtl8139_ethtool_ops;
987 dev->watchdog_timeo = TX_TIMEOUT;
988 netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
989
990 /* note: the hardware is not capable of sg/csum/highdma, however
991 * through the use of skb_copy_and_csum_dev we enable these
992 * features
993 */
994 dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
995 dev->vlan_features = dev->features;
996
997 dev->irq = pdev->irq;
998
999 /* tp zeroed and aligned in alloc_etherdev */
1000 tp = netdev_priv(dev);
1001
1002 /* note: tp->chipset set in rtl8139_init_board */
1003 tp->drv_flags = board_info[ent->driver_data].hw_flags;
1004 tp->mmio_addr = ioaddr;
1005 tp->msg_enable =
1006 (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
1007 spin_lock_init (&tp->lock);
1008 spin_lock_init (&tp->rx_lock);
1009 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1010 tp->mii.dev = dev;
1011 tp->mii.mdio_read = mdio_read;
1012 tp->mii.mdio_write = mdio_write;
1013 tp->mii.phy_id_mask = 0x3f;
1014 tp->mii.reg_num_mask = 0x1f;
1015
1016 /* dev is fully set up and ready to use now */
1017 pr_debug("about to register device named %s (%p)...\n",
1018 dev->name, dev);
1019 i = register_netdev (dev);
1020 if (i) goto err_out;
1021
1022 pci_set_drvdata (pdev, dev);
1023
1024 netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n",
1025 board_info[ent->driver_data].name,
1026 dev->base_addr, dev->dev_addr, dev->irq);
1027
1028 netdev_dbg(dev, "Identified 8139 chip type '%s'\n",
1029 rtl_chip_info[tp->chipset].name);
1030
1031 /* Find the connected MII xcvrs.
1032 Doing this in open() would allow detecting external xcvrs later, but
1033 takes too much time. */
1034 #ifdef CONFIG_8139TOO_8129
1035 if (tp->drv_flags & HAS_MII_XCVR) {
1036 int phy, phy_idx = 0;
1037 for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
1038 int mii_status = mdio_read(dev, phy, 1);
1039 if (mii_status != 0xffff && mii_status != 0x0000) {
1040 u16 advertising = mdio_read(dev, phy, 4);
1041 tp->phys[phy_idx++] = phy;
1042 netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n",
1043 phy, mii_status, advertising);
1044 }
1045 }
1046 if (phy_idx == 0) {
1047 netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n");
1048 tp->phys[0] = 32;
1049 }
1050 } else
1051 #endif
1052 tp->phys[0] = 32;
1053 tp->mii.phy_id = tp->phys[0];
1054
1055 /* The lower four bits are the media type. */
1056 option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
1057 if (option > 0) {
1058 tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
1059 tp->default_port = option & 0xFF;
1060 if (tp->default_port)
1061 tp->mii.force_media = 1;
1062 }
1063 if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
1064 tp->mii.full_duplex = full_duplex[board_idx];
1065 if (tp->mii.full_duplex) {
1066 netdev_info(dev, "Media type forced to Full Duplex\n");
1067 /* Changing the MII-advertised media because might prevent
1068 re-connection. */
1069 tp->mii.force_media = 1;
1070 }
1071 if (tp->default_port) {
1072 netdev_info(dev, " Forcing %dMbps %s-duplex operation\n",
1073 (option & 0x20 ? 100 : 10),
1074 (option & 0x10 ? "full" : "half"));
1075 mdio_write(dev, tp->phys[0], 0,
1076 ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
1077 ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
1078 }
1079
1080 /* Put the chip into low-power mode. */
1081 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1082 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
1083
1084 return 0;
1085
1086 err_out:
1087 __rtl8139_cleanup_dev (dev);
1088 pci_disable_device (pdev);
1089 return i;
1090 }
1091
1092
1093 static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
1094 {
1095 struct net_device *dev = pci_get_drvdata (pdev);
1096 struct rtl8139_private *tp = netdev_priv(dev);
1097
1098 assert (dev != NULL);
1099
1100 cancel_delayed_work_sync(&tp->thread);
1101
1102 unregister_netdev (dev);
1103
1104 __rtl8139_cleanup_dev (dev);
1105 pci_disable_device (pdev);
1106 }
1107
1108
1109 /* Serial EEPROM section. */
1110
1111 /* EEPROM_Ctrl bits. */
1112 #define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
1113 #define EE_CS 0x08 /* EEPROM chip select. */
1114 #define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
1115 #define EE_WRITE_0 0x00
1116 #define EE_WRITE_1 0x02
1117 #define EE_DATA_READ 0x01 /* EEPROM chip data out. */
1118 #define EE_ENB (0x80 | EE_CS)
1119
1120 /* Delay between EEPROM clock transitions.
1121 No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
1122 */
1123
1124 #define eeprom_delay() (void)RTL_R32(Cfg9346)
1125
1126 /* The EEPROM commands include the alway-set leading bit. */
1127 #define EE_WRITE_CMD (5)
1128 #define EE_READ_CMD (6)
1129 #define EE_ERASE_CMD (7)
1130
1131 static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
1132 {
1133 int i;
1134 unsigned retval = 0;
1135 int read_cmd = location | (EE_READ_CMD << addr_len);
1136
1137 RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
1138 RTL_W8 (Cfg9346, EE_ENB);
1139 eeprom_delay ();
1140
1141 /* Shift the read command bits out. */
1142 for (i = 4 + addr_len; i >= 0; i--) {
1143 int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
1144 RTL_W8 (Cfg9346, EE_ENB | dataval);
1145 eeprom_delay ();
1146 RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
1147 eeprom_delay ();
1148 }
1149 RTL_W8 (Cfg9346, EE_ENB);
1150 eeprom_delay ();
1151
1152 for (i = 16; i > 0; i--) {
1153 RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
1154 eeprom_delay ();
1155 retval =
1156 (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
1157 0);
1158 RTL_W8 (Cfg9346, EE_ENB);
1159 eeprom_delay ();
1160 }
1161
1162 /* Terminate the EEPROM access. */
1163 RTL_W8 (Cfg9346, ~EE_CS);
1164 eeprom_delay ();
1165
1166 return retval;
1167 }
1168
1169 /* MII serial management: mostly bogus for now. */
1170 /* Read and write the MII management registers using software-generated
1171 serial MDIO protocol.
1172 The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
1173 met by back-to-back PCI I/O cycles, but we insert a delay to avoid
1174 "overclocking" issues. */
1175 #define MDIO_DIR 0x80
1176 #define MDIO_DATA_OUT 0x04
1177 #define MDIO_DATA_IN 0x02
1178 #define MDIO_CLK 0x01
1179 #define MDIO_WRITE0 (MDIO_DIR)
1180 #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
1181
1182 #define mdio_delay() RTL_R8(Config4)
1183
1184
1185 static const char mii_2_8139_map[8] = {
1186 BasicModeCtrl,
1187 BasicModeStatus,
1188 0,
1189 0,
1190 NWayAdvert,
1191 NWayLPAR,
1192 NWayExpansion,
1193 0
1194 };
1195
1196
1197 #ifdef CONFIG_8139TOO_8129
1198 /* Syncronize the MII management interface by shifting 32 one bits out. */
1199 static void mdio_sync (void __iomem *ioaddr)
1200 {
1201 int i;
1202
1203 for (i = 32; i >= 0; i--) {
1204 RTL_W8 (Config4, MDIO_WRITE1);
1205 mdio_delay ();
1206 RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
1207 mdio_delay ();
1208 }
1209 }
1210 #endif
1211
1212 static int mdio_read (struct net_device *dev, int phy_id, int location)
1213 {
1214 struct rtl8139_private *tp = netdev_priv(dev);
1215 int retval = 0;
1216 #ifdef CONFIG_8139TOO_8129
1217 void __iomem *ioaddr = tp->mmio_addr;
1218 int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
1219 int i;
1220 #endif
1221
1222 if (phy_id > 31) { /* Really a 8139. Use internal registers. */
1223 void __iomem *ioaddr = tp->mmio_addr;
1224 return location < 8 && mii_2_8139_map[location] ?
1225 RTL_R16 (mii_2_8139_map[location]) : 0;
1226 }
1227
1228 #ifdef CONFIG_8139TOO_8129
1229 mdio_sync (ioaddr);
1230 /* Shift the read command bits out. */
1231 for (i = 15; i >= 0; i--) {
1232 int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
1233
1234 RTL_W8 (Config4, MDIO_DIR | dataval);
1235 mdio_delay ();
1236 RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
1237 mdio_delay ();
1238 }
1239
1240 /* Read the two transition, 16 data, and wire-idle bits. */
1241 for (i = 19; i > 0; i--) {
1242 RTL_W8 (Config4, 0);
1243 mdio_delay ();
1244 retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
1245 RTL_W8 (Config4, MDIO_CLK);
1246 mdio_delay ();
1247 }
1248 #endif
1249
1250 return (retval >> 1) & 0xffff;
1251 }
1252
1253
1254 static void mdio_write (struct net_device *dev, int phy_id, int location,
1255 int value)
1256 {
1257 struct rtl8139_private *tp = netdev_priv(dev);
1258 #ifdef CONFIG_8139TOO_8129
1259 void __iomem *ioaddr = tp->mmio_addr;
1260 int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
1261 int i;
1262 #endif
1263
1264 if (phy_id > 31) { /* Really a 8139. Use internal registers. */
1265 void __iomem *ioaddr = tp->mmio_addr;
1266 if (location == 0) {
1267 RTL_W8 (Cfg9346, Cfg9346_Unlock);
1268 RTL_W16 (BasicModeCtrl, value);
1269 RTL_W8 (Cfg9346, Cfg9346_Lock);
1270 } else if (location < 8 && mii_2_8139_map[location])
1271 RTL_W16 (mii_2_8139_map[location], value);
1272 return;
1273 }
1274
1275 #ifdef CONFIG_8139TOO_8129
1276 mdio_sync (ioaddr);
1277
1278 /* Shift the command bits out. */
1279 for (i = 31; i >= 0; i--) {
1280 int dataval =
1281 (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
1282 RTL_W8 (Config4, dataval);
1283 mdio_delay ();
1284 RTL_W8 (Config4, dataval | MDIO_CLK);
1285 mdio_delay ();
1286 }
1287 /* Clear out extra bits. */
1288 for (i = 2; i > 0; i--) {
1289 RTL_W8 (Config4, 0);
1290 mdio_delay ();
1291 RTL_W8 (Config4, MDIO_CLK);
1292 mdio_delay ();
1293 }
1294 #endif
1295 }
1296
1297
1298 static int rtl8139_open (struct net_device *dev)
1299 {
1300 struct rtl8139_private *tp = netdev_priv(dev);
1301 int retval;
1302 void __iomem *ioaddr = tp->mmio_addr;
1303
1304 retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
1305 if (retval)
1306 return retval;
1307
1308 tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
1309 &tp->tx_bufs_dma, GFP_KERNEL);
1310 tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
1311 &tp->rx_ring_dma, GFP_KERNEL);
1312 if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
1313 free_irq(dev->irq, dev);
1314
1315 if (tp->tx_bufs)
1316 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
1317 tp->tx_bufs, tp->tx_bufs_dma);
1318 if (tp->rx_ring)
1319 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
1320 tp->rx_ring, tp->rx_ring_dma);
1321
1322 return -ENOMEM;
1323
1324 }
1325
1326 napi_enable(&tp->napi);
1327
1328 tp->mii.full_duplex = tp->mii.force_media;
1329 tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
1330
1331 rtl8139_init_ring (dev);
1332 rtl8139_hw_start (dev);
1333 netif_start_queue (dev);
1334
1335 netif_dbg(tp, ifup, dev,
1336 "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
1337 __func__,
1338 (unsigned long long)pci_resource_start (tp->pci_dev, 1),
1339 dev->irq, RTL_R8 (MediaStatus),
1340 tp->mii.full_duplex ? "full" : "half");
1341
1342 rtl8139_start_thread(tp);
1343
1344 return 0;
1345 }
1346
1347
1348 static void rtl_check_media (struct net_device *dev, unsigned int init_media)
1349 {
1350 struct rtl8139_private *tp = netdev_priv(dev);
1351
1352 if (tp->phys[0] >= 0) {
1353 mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
1354 }
1355 }
1356
1357 /* Start the hardware at open or resume. */
1358 static void rtl8139_hw_start (struct net_device *dev)
1359 {
1360 struct rtl8139_private *tp = netdev_priv(dev);
1361 void __iomem *ioaddr = tp->mmio_addr;
1362 u32 i;
1363 u8 tmp;
1364
1365 /* Bring old chips out of low-power mode. */
1366 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1367 RTL_W8 (HltClk, 'R');
1368
1369 rtl8139_chip_reset (ioaddr);
1370
1371 /* unlock Config[01234] and BMCR register writes */
1372 RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1373 /* Restore our idea of the MAC address. */
1374 RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
1375 RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
1376
1377 tp->cur_rx = 0;
1378
1379 /* init Rx ring buffer DMA address */
1380 RTL_W32_F (RxBuf, tp->rx_ring_dma);
1381
1382 /* Must enable Tx/Rx before setting transfer thresholds! */
1383 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1384
1385 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1386 RTL_W32 (RxConfig, tp->rx_config);
1387 RTL_W32 (TxConfig, rtl8139_tx_config);
1388
1389 rtl_check_media (dev, 1);
1390
1391 if (tp->chipset >= CH_8139B) {
1392 /* Disable magic packet scanning, which is enabled
1393 * when PM is enabled in Config1. It can be reenabled
1394 * via ETHTOOL_SWOL if desired. */
1395 RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
1396 }
1397
1398 netdev_dbg(dev, "init buffer addresses\n");
1399
1400 /* Lock Config[01234] and BMCR register writes */
1401 RTL_W8 (Cfg9346, Cfg9346_Lock);
1402
1403 /* init Tx buffer DMA addresses */
1404 for (i = 0; i < NUM_TX_DESC; i++)
1405 RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
1406
1407 RTL_W32 (RxMissed, 0);
1408
1409 rtl8139_set_rx_mode (dev);
1410
1411 /* no early-rx interrupts */
1412 RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
1413
1414 /* make sure RxTx has started */
1415 tmp = RTL_R8 (ChipCmd);
1416 if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
1417 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1418
1419 /* Enable all known interrupts by setting the interrupt mask. */
1420 RTL_W16 (IntrMask, rtl8139_intr_mask);
1421 }
1422
1423
1424 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
1425 static void rtl8139_init_ring (struct net_device *dev)
1426 {
1427 struct rtl8139_private *tp = netdev_priv(dev);
1428 int i;
1429
1430 tp->cur_rx = 0;
1431 tp->cur_tx = 0;
1432 tp->dirty_tx = 0;
1433
1434 for (i = 0; i < NUM_TX_DESC; i++)
1435 tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
1436 }
1437
1438
1439 /* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
1440 static int next_tick = 3 * HZ;
1441
1442 #ifndef CONFIG_8139TOO_TUNE_TWISTER
1443 static inline void rtl8139_tune_twister (struct net_device *dev,
1444 struct rtl8139_private *tp) {}
1445 #else
1446 enum TwisterParamVals {
1447 PARA78_default = 0x78fa8388,
1448 PARA7c_default = 0xcb38de43, /* param[0][3] */
1449 PARA7c_xxx = 0xcb38de43,
1450 };
1451
1452 static const unsigned long param[4][4] = {
1453 {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
1454 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1455 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1456 {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
1457 };
1458
1459 static void rtl8139_tune_twister (struct net_device *dev,
1460 struct rtl8139_private *tp)
1461 {
1462 int linkcase;
1463 void __iomem *ioaddr = tp->mmio_addr;
1464
1465 /* This is a complicated state machine to configure the "twister" for
1466 impedance/echos based on the cable length.
1467 All of this is magic and undocumented.
1468 */
1469 switch (tp->twistie) {
1470 case 1:
1471 if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
1472 /* We have link beat, let us tune the twister. */
1473 RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
1474 tp->twistie = 2; /* Change to state 2. */
1475 next_tick = HZ / 10;
1476 } else {
1477 /* Just put in some reasonable defaults for when beat returns. */
1478 RTL_W16 (CSCR, CSCR_LinkDownCmd);
1479 RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
1480 RTL_W32 (PARA78, PARA78_default);
1481 RTL_W32 (PARA7c, PARA7c_default);
1482 tp->twistie = 0; /* Bail from future actions. */
1483 }
1484 break;
1485 case 2:
1486 /* Read how long it took to hear the echo. */
1487 linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
1488 if (linkcase == 0x7000)
1489 tp->twist_row = 3;
1490 else if (linkcase == 0x3000)
1491 tp->twist_row = 2;
1492 else if (linkcase == 0x1000)
1493 tp->twist_row = 1;
1494 else
1495 tp->twist_row = 0;
1496 tp->twist_col = 0;
1497 tp->twistie = 3; /* Change to state 2. */
1498 next_tick = HZ / 10;
1499 break;
1500 case 3:
1501 /* Put out four tuning parameters, one per 100msec. */
1502 if (tp->twist_col == 0)
1503 RTL_W16 (FIFOTMS, 0);
1504 RTL_W32 (PARA7c, param[(int) tp->twist_row]
1505 [(int) tp->twist_col]);
1506 next_tick = HZ / 10;
1507 if (++tp->twist_col >= 4) {
1508 /* For short cables we are done.
1509 For long cables (row == 3) check for mistune. */
1510 tp->twistie =
1511 (tp->twist_row == 3) ? 4 : 0;
1512 }
1513 break;
1514 case 4:
1515 /* Special case for long cables: check for mistune. */
1516 if ((RTL_R16 (CSCR) &
1517 CSCR_LinkStatusBits) == 0x7000) {
1518 tp->twistie = 0;
1519 break;
1520 } else {
1521 RTL_W32 (PARA7c, 0xfb38de03);
1522 tp->twistie = 5;
1523 next_tick = HZ / 10;
1524 }
1525 break;
1526 case 5:
1527 /* Retune for shorter cable (column 2). */
1528 RTL_W32 (FIFOTMS, 0x20);
1529 RTL_W32 (PARA78, PARA78_default);
1530 RTL_W32 (PARA7c, PARA7c_default);
1531 RTL_W32 (FIFOTMS, 0x00);
1532 tp->twist_row = 2;
1533 tp->twist_col = 0;
1534 tp->twistie = 3;
1535 next_tick = HZ / 10;
1536 break;
1537
1538 default:
1539 /* do nothing */
1540 break;
1541 }
1542 }
1543 #endif /* CONFIG_8139TOO_TUNE_TWISTER */
1544
1545 static inline void rtl8139_thread_iter (struct net_device *dev,
1546 struct rtl8139_private *tp,
1547 void __iomem *ioaddr)
1548 {
1549 int mii_lpa;
1550
1551 mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
1552
1553 if (!tp->mii.force_media && mii_lpa != 0xffff) {
1554 int duplex = ((mii_lpa & LPA_100FULL) ||
1555 (mii_lpa & 0x01C0) == 0x0040);
1556 if (tp->mii.full_duplex != duplex) {
1557 tp->mii.full_duplex = duplex;
1558
1559 if (mii_lpa) {
1560 netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
1561 tp->mii.full_duplex ? "full" : "half",
1562 tp->phys[0], mii_lpa);
1563 } else {
1564 netdev_info(dev, "media is unconnected, link down, or incompatible connection\n");
1565 }
1566 #if 0
1567 RTL_W8 (Cfg9346, Cfg9346_Unlock);
1568 RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
1569 RTL_W8 (Cfg9346, Cfg9346_Lock);
1570 #endif
1571 }
1572 }
1573
1574 next_tick = HZ * 60;
1575
1576 rtl8139_tune_twister (dev, tp);
1577
1578 netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
1579 RTL_R16(NWayLPAR));
1580 netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n",
1581 RTL_R16(IntrMask), RTL_R16(IntrStatus));
1582 netdev_dbg(dev, "Chip config %02x %02x\n",
1583 RTL_R8(Config0), RTL_R8(Config1));
1584 }
1585
1586 static void rtl8139_thread (struct work_struct *work)
1587 {
1588 struct rtl8139_private *tp =
1589 container_of(work, struct rtl8139_private, thread.work);
1590 struct net_device *dev = tp->mii.dev;
1591 unsigned long thr_delay = next_tick;
1592
1593 rtnl_lock();
1594
1595 if (!netif_running(dev))
1596 goto out_unlock;
1597
1598 if (tp->watchdog_fired) {
1599 tp->watchdog_fired = 0;
1600 rtl8139_tx_timeout_task(work);
1601 } else
1602 rtl8139_thread_iter(dev, tp, tp->mmio_addr);
1603
1604 if (tp->have_thread)
1605 schedule_delayed_work(&tp->thread, thr_delay);
1606 out_unlock:
1607 rtnl_unlock ();
1608 }
1609
1610 static void rtl8139_start_thread(struct rtl8139_private *tp)
1611 {
1612 tp->twistie = 0;
1613 if (tp->chipset == CH_8139_K)
1614 tp->twistie = 1;
1615 else if (tp->drv_flags & HAS_LNK_CHNG)
1616 return;
1617
1618 tp->have_thread = 1;
1619 tp->watchdog_fired = 0;
1620
1621 schedule_delayed_work(&tp->thread, next_tick);
1622 }
1623
1624 static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
1625 {
1626 tp->cur_tx = 0;
1627 tp->dirty_tx = 0;
1628
1629 /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
1630 }
1631
1632 static void rtl8139_tx_timeout_task (struct work_struct *work)
1633 {
1634 struct rtl8139_private *tp =
1635 container_of(work, struct rtl8139_private, thread.work);
1636 struct net_device *dev = tp->mii.dev;
1637 void __iomem *ioaddr = tp->mmio_addr;
1638 int i;
1639 u8 tmp8;
1640
1641 netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n",
1642 RTL_R8(ChipCmd), RTL_R16(IntrStatus),
1643 RTL_R16(IntrMask), RTL_R8(MediaStatus));
1644 /* Emit info to figure out what went wrong. */
1645 netdev_dbg(dev, "Tx queue start entry %ld dirty entry %ld\n",
1646 tp->cur_tx, tp->dirty_tx);
1647 for (i = 0; i < NUM_TX_DESC; i++)
1648 netdev_dbg(dev, "Tx descriptor %d is %08x%s\n",
1649 i, RTL_R32(TxStatus0 + (i * 4)),
1650 i == tp->dirty_tx % NUM_TX_DESC ?
1651 " (queue head)" : "");
1652
1653 tp->xstats.tx_timeouts++;
1654
1655 /* disable Tx ASAP, if not already */
1656 tmp8 = RTL_R8 (ChipCmd);
1657 if (tmp8 & CmdTxEnb)
1658 RTL_W8 (ChipCmd, CmdRxEnb);
1659
1660 spin_lock_bh(&tp->rx_lock);
1661 /* Disable interrupts by clearing the interrupt mask. */
1662 RTL_W16 (IntrMask, 0x0000);
1663
1664 /* Stop a shared interrupt from scavenging while we are. */
1665 spin_lock_irq(&tp->lock);
1666 rtl8139_tx_clear (tp);
1667 spin_unlock_irq(&tp->lock);
1668
1669 /* ...and finally, reset everything */
1670 if (netif_running(dev)) {
1671 rtl8139_hw_start (dev);
1672 netif_wake_queue (dev);
1673 }
1674 spin_unlock_bh(&tp->rx_lock);
1675 }
1676
1677 static void rtl8139_tx_timeout (struct net_device *dev)
1678 {
1679 struct rtl8139_private *tp = netdev_priv(dev);
1680
1681 tp->watchdog_fired = 1;
1682 if (!tp->have_thread) {
1683 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1684 schedule_delayed_work(&tp->thread, next_tick);
1685 }
1686 }
1687
1688 static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
1689 struct net_device *dev)
1690 {
1691 struct rtl8139_private *tp = netdev_priv(dev);
1692 void __iomem *ioaddr = tp->mmio_addr;
1693 unsigned int entry;
1694 unsigned int len = skb->len;
1695 unsigned long flags;
1696
1697 /* Calculate the next Tx descriptor entry. */
1698 entry = tp->cur_tx % NUM_TX_DESC;
1699
1700 /* Note: the chip doesn't have auto-pad! */
1701 if (likely(len < TX_BUF_SIZE)) {
1702 if (len < ETH_ZLEN)
1703 memset(tp->tx_buf[entry], 0, ETH_ZLEN);
1704 skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
1705 dev_kfree_skb(skb);
1706 } else {
1707 dev_kfree_skb(skb);
1708 dev->stats.tx_dropped++;
1709 return NETDEV_TX_OK;
1710 }
1711
1712 spin_lock_irqsave(&tp->lock, flags);
1713 /*
1714 * Writing to TxStatus triggers a DMA transfer of the data
1715 * copied to tp->tx_buf[entry] above. Use a memory barrier
1716 * to make sure that the device sees the updated data.
1717 */
1718 wmb();
1719 RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
1720 tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
1721
1722 tp->cur_tx++;
1723
1724 if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
1725 netif_stop_queue (dev);
1726 spin_unlock_irqrestore(&tp->lock, flags);
1727
1728 netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n",
1729 len, entry);
1730
1731 return NETDEV_TX_OK;
1732 }
1733
1734
1735 static void rtl8139_tx_interrupt (struct net_device *dev,
1736 struct rtl8139_private *tp,
1737 void __iomem *ioaddr)
1738 {
1739 unsigned long dirty_tx, tx_left;
1740
1741 assert (dev != NULL);
1742 assert (ioaddr != NULL);
1743
1744 dirty_tx = tp->dirty_tx;
1745 tx_left = tp->cur_tx - dirty_tx;
1746 while (tx_left > 0) {
1747 int entry = dirty_tx % NUM_TX_DESC;
1748 int txstatus;
1749
1750 txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
1751
1752 if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
1753 break; /* It still hasn't been Txed */
1754
1755 /* Note: TxCarrierLost is always asserted at 100mbps. */
1756 if (txstatus & (TxOutOfWindow | TxAborted)) {
1757 /* There was an major error, log it. */
1758 netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n",
1759 txstatus);
1760 dev->stats.tx_errors++;
1761 if (txstatus & TxAborted) {
1762 dev->stats.tx_aborted_errors++;
1763 RTL_W32 (TxConfig, TxClearAbt);
1764 RTL_W16 (IntrStatus, TxErr);
1765 wmb();
1766 }
1767 if (txstatus & TxCarrierLost)
1768 dev->stats.tx_carrier_errors++;
1769 if (txstatus & TxOutOfWindow)
1770 dev->stats.tx_window_errors++;
1771 } else {
1772 if (txstatus & TxUnderrun) {
1773 /* Add 64 to the Tx FIFO threshold. */
1774 if (tp->tx_flag < 0x00300000)
1775 tp->tx_flag += 0x00020000;
1776 dev->stats.tx_fifo_errors++;
1777 }
1778 dev->stats.collisions += (txstatus >> 24) & 15;
1779 dev->stats.tx_bytes += txstatus & 0x7ff;
1780 dev->stats.tx_packets++;
1781 }
1782
1783 dirty_tx++;
1784 tx_left--;
1785 }
1786
1787 #ifndef RTL8139_NDEBUG
1788 if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
1789 netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n",
1790 dirty_tx, tp->cur_tx);
1791 dirty_tx += NUM_TX_DESC;
1792 }
1793 #endif /* RTL8139_NDEBUG */
1794
1795 /* only wake the queue if we did work, and the queue is stopped */
1796 if (tp->dirty_tx != dirty_tx) {
1797 tp->dirty_tx = dirty_tx;
1798 mb();
1799 netif_wake_queue (dev);
1800 }
1801 }
1802
1803
1804 /* TODO: clean this up! Rx reset need not be this intensive */
1805 static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
1806 struct rtl8139_private *tp, void __iomem *ioaddr)
1807 {
1808 u8 tmp8;
1809 #ifdef CONFIG_8139_OLD_RX_RESET
1810 int tmp_work;
1811 #endif
1812
1813 netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n",
1814 rx_status);
1815 dev->stats.rx_errors++;
1816 if (!(rx_status & RxStatusOK)) {
1817 if (rx_status & RxTooLong) {
1818 netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
1819 rx_status);
1820 /* A.C.: The chip hangs here. */
1821 }
1822 if (rx_status & (RxBadSymbol | RxBadAlign))
1823 dev->stats.rx_frame_errors++;
1824 if (rx_status & (RxRunt | RxTooLong))
1825 dev->stats.rx_length_errors++;
1826 if (rx_status & RxCRCErr)
1827 dev->stats.rx_crc_errors++;
1828 } else {
1829 tp->xstats.rx_lost_in_ring++;
1830 }
1831
1832 #ifndef CONFIG_8139_OLD_RX_RESET
1833 tmp8 = RTL_R8 (ChipCmd);
1834 RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
1835 RTL_W8 (ChipCmd, tmp8);
1836 RTL_W32 (RxConfig, tp->rx_config);
1837 tp->cur_rx = 0;
1838 #else
1839 /* Reset the receiver, based on RealTek recommendation. (Bug?) */
1840
1841 /* disable receive */
1842 RTL_W8_F (ChipCmd, CmdTxEnb);
1843 tmp_work = 200;
1844 while (--tmp_work > 0) {
1845 udelay(1);
1846 tmp8 = RTL_R8 (ChipCmd);
1847 if (!(tmp8 & CmdRxEnb))
1848 break;
1849 }
1850 if (tmp_work <= 0)
1851 netdev_warn(dev, "rx stop wait too long\n");
1852 /* restart receive */
1853 tmp_work = 200;
1854 while (--tmp_work > 0) {
1855 RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
1856 udelay(1);
1857 tmp8 = RTL_R8 (ChipCmd);
1858 if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
1859 break;
1860 }
1861 if (tmp_work <= 0)
1862 netdev_warn(dev, "tx/rx enable wait too long\n");
1863
1864 /* and reinitialize all rx related registers */
1865 RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1866 /* Must enable Tx/Rx before setting transfer thresholds! */
1867 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1868
1869 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1870 RTL_W32 (RxConfig, tp->rx_config);
1871 tp->cur_rx = 0;
1872
1873 netdev_dbg(dev, "init buffer addresses\n");
1874
1875 /* Lock Config[01234] and BMCR register writes */
1876 RTL_W8 (Cfg9346, Cfg9346_Lock);
1877
1878 /* init Rx ring buffer DMA address */
1879 RTL_W32_F (RxBuf, tp->rx_ring_dma);
1880
1881 /* A.C.: Reset the multicast list. */
1882 __set_rx_mode (dev);
1883 #endif
1884 }
1885
1886 #if RX_BUF_IDX == 3
1887 static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
1888 u32 offset, unsigned int size)
1889 {
1890 u32 left = RX_BUF_LEN - offset;
1891
1892 if (size > left) {
1893 skb_copy_to_linear_data(skb, ring + offset, left);
1894 skb_copy_to_linear_data_offset(skb, left, ring, size - left);
1895 } else
1896 skb_copy_to_linear_data(skb, ring + offset, size);
1897 }
1898 #endif
1899
1900 static void rtl8139_isr_ack(struct rtl8139_private *tp)
1901 {
1902 void __iomem *ioaddr = tp->mmio_addr;
1903 u16 status;
1904
1905 status = RTL_R16 (IntrStatus) & RxAckBits;
1906
1907 /* Clear out errors and receive interrupts */
1908 if (likely(status != 0)) {
1909 if (unlikely(status & (RxFIFOOver | RxOverflow))) {
1910 tp->dev->stats.rx_errors++;
1911 if (status & RxFIFOOver)
1912 tp->dev->stats.rx_fifo_errors++;
1913 }
1914 RTL_W16_F (IntrStatus, RxAckBits);
1915 }
1916 }
1917
1918 static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
1919 int budget)
1920 {
1921 void __iomem *ioaddr = tp->mmio_addr;
1922 int received = 0;
1923 unsigned char *rx_ring = tp->rx_ring;
1924 unsigned int cur_rx = tp->cur_rx;
1925 unsigned int rx_size = 0;
1926
1927 netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
1928 __func__, (u16)cur_rx,
1929 RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
1930
1931 while (netif_running(dev) && received < budget &&
1932 (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
1933 u32 ring_offset = cur_rx % RX_BUF_LEN;
1934 u32 rx_status;
1935 unsigned int pkt_size;
1936 struct sk_buff *skb;
1937
1938 rmb();
1939
1940 /* read size+status of next frame from DMA ring buffer */
1941 rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
1942 rx_size = rx_status >> 16;
1943 pkt_size = rx_size - 4;
1944
1945 netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n",
1946 __func__, rx_status, rx_size, cur_rx);
1947 #if RTL8139_DEBUG > 2
1948 print_hex_dump(KERN_DEBUG, "Frame contents: ",
1949 DUMP_PREFIX_OFFSET, 16, 1,
1950 &rx_ring[ring_offset], 70, true);
1951 #endif
1952
1953 /* Packet copy from FIFO still in progress.
1954 * Theoretically, this should never happen
1955 * since EarlyRx is disabled.
1956 */
1957 if (unlikely(rx_size == 0xfff0)) {
1958 if (!tp->fifo_copy_timeout)
1959 tp->fifo_copy_timeout = jiffies + 2;
1960 else if (time_after(jiffies, tp->fifo_copy_timeout)) {
1961 netdev_dbg(dev, "hung FIFO. Reset\n");
1962 rx_size = 0;
1963 goto no_early_rx;
1964 }
1965 netif_dbg(tp, intr, dev, "fifo copy in progress\n");
1966 tp->xstats.early_rx++;
1967 break;
1968 }
1969
1970 no_early_rx:
1971 tp->fifo_copy_timeout = 0;
1972
1973 /* If Rx err or invalid rx_size/rx_status received
1974 * (which happens if we get lost in the ring),
1975 * Rx process gets reset, so we abort any further
1976 * Rx processing.
1977 */
1978 if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
1979 (rx_size < 8) ||
1980 (!(rx_status & RxStatusOK)))) {
1981 rtl8139_rx_err (rx_status, dev, tp, ioaddr);
1982 received = -1;
1983 goto out;
1984 }
1985
1986 /* Malloc up new buffer, compatible with net-2e. */
1987 /* Omit the four octet CRC from the length. */
1988
1989 skb = netdev_alloc_skb_ip_align(dev, pkt_size);
1990 if (likely(skb)) {
1991 #if RX_BUF_IDX == 3
1992 wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
1993 #else
1994 skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
1995 #endif
1996 skb_put (skb, pkt_size);
1997
1998 skb->protocol = eth_type_trans (skb, dev);
1999
2000 dev->stats.rx_bytes += pkt_size;
2001 dev->stats.rx_packets++;
2002
2003 netif_receive_skb (skb);
2004 } else {
2005 if (net_ratelimit())
2006 netdev_warn(dev, "Memory squeeze, dropping packet\n");
2007 dev->stats.rx_dropped++;
2008 }
2009 received++;
2010
2011 cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
2012 RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
2013
2014 rtl8139_isr_ack(tp);
2015 }
2016
2017 if (unlikely(!received || rx_size == 0xfff0))
2018 rtl8139_isr_ack(tp);
2019
2020 netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
2021 __func__, cur_rx,
2022 RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
2023
2024 tp->cur_rx = cur_rx;
2025
2026 /*
2027 * The receive buffer should be mostly empty.
2028 * Tell NAPI to reenable the Rx irq.
2029 */
2030 if (tp->fifo_copy_timeout)
2031 received = budget;
2032
2033 out:
2034 return received;
2035 }
2036
2037
2038 static void rtl8139_weird_interrupt (struct net_device *dev,
2039 struct rtl8139_private *tp,
2040 void __iomem *ioaddr,
2041 int status, int link_changed)
2042 {
2043 netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status);
2044
2045 assert (dev != NULL);
2046 assert (tp != NULL);
2047 assert (ioaddr != NULL);
2048
2049 /* Update the error count. */
2050 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2051 RTL_W32 (RxMissed, 0);
2052
2053 if ((status & RxUnderrun) && link_changed &&
2054 (tp->drv_flags & HAS_LNK_CHNG)) {
2055 rtl_check_media(dev, 0);
2056 status &= ~RxUnderrun;
2057 }
2058
2059 if (status & (RxUnderrun | RxErr))
2060 dev->stats.rx_errors++;
2061
2062 if (status & PCSTimeout)
2063 dev->stats.rx_length_errors++;
2064 if (status & RxUnderrun)
2065 dev->stats.rx_fifo_errors++;
2066 if (status & PCIErr) {
2067 u16 pci_cmd_status;
2068 pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
2069 pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
2070
2071 netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
2072 }
2073 }
2074
2075 static int rtl8139_poll(struct napi_struct *napi, int budget)
2076 {
2077 struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
2078 struct net_device *dev = tp->dev;
2079 void __iomem *ioaddr = tp->mmio_addr;
2080 int work_done;
2081
2082 spin_lock(&tp->rx_lock);
2083 work_done = 0;
2084 if (likely(RTL_R16(IntrStatus) & RxAckBits))
2085 work_done += rtl8139_rx(dev, tp, budget);
2086
2087 if (work_done < budget) {
2088 unsigned long flags;
2089 /*
2090 * Order is important since data can get interrupted
2091 * again when we think we are done.
2092 */
2093 spin_lock_irqsave(&tp->lock, flags);
2094 __napi_complete(napi);
2095 RTL_W16_F(IntrMask, rtl8139_intr_mask);
2096 spin_unlock_irqrestore(&tp->lock, flags);
2097 }
2098 spin_unlock(&tp->rx_lock);
2099
2100 return work_done;
2101 }
2102
2103 /* The interrupt handler does all of the Rx thread work and cleans up
2104 after the Tx thread. */
2105 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
2106 {
2107 struct net_device *dev = (struct net_device *) dev_instance;
2108 struct rtl8139_private *tp = netdev_priv(dev);
2109 void __iomem *ioaddr = tp->mmio_addr;
2110 u16 status, ackstat;
2111 int link_changed = 0; /* avoid bogus "uninit" warning */
2112 int handled = 0;
2113
2114 spin_lock (&tp->lock);
2115 status = RTL_R16 (IntrStatus);
2116
2117 /* shared irq? */
2118 if (unlikely((status & rtl8139_intr_mask) == 0))
2119 goto out;
2120
2121 handled = 1;
2122
2123 /* h/w no longer present (hotplug?) or major error, bail */
2124 if (unlikely(status == 0xFFFF))
2125 goto out;
2126
2127 /* close possible race's with dev_close */
2128 if (unlikely(!netif_running(dev))) {
2129 RTL_W16 (IntrMask, 0);
2130 goto out;
2131 }
2132
2133 /* Acknowledge all of the current interrupt sources ASAP, but
2134 an first get an additional status bit from CSCR. */
2135 if (unlikely(status & RxUnderrun))
2136 link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
2137
2138 ackstat = status & ~(RxAckBits | TxErr);
2139 if (ackstat)
2140 RTL_W16 (IntrStatus, ackstat);
2141
2142 /* Receive packets are processed by poll routine.
2143 If not running start it now. */
2144 if (status & RxAckBits){
2145 if (napi_schedule_prep(&tp->napi)) {
2146 RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
2147 __napi_schedule(&tp->napi);
2148 }
2149 }
2150
2151 /* Check uncommon events with one test. */
2152 if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
2153 rtl8139_weird_interrupt (dev, tp, ioaddr,
2154 status, link_changed);
2155
2156 if (status & (TxOK | TxErr)) {
2157 rtl8139_tx_interrupt (dev, tp, ioaddr);
2158 if (status & TxErr)
2159 RTL_W16 (IntrStatus, TxErr);
2160 }
2161 out:
2162 spin_unlock (&tp->lock);
2163
2164 netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n",
2165 RTL_R16(IntrStatus));
2166 return IRQ_RETVAL(handled);
2167 }
2168
2169 #ifdef CONFIG_NET_POLL_CONTROLLER
2170 /*
2171 * Polling receive - used by netconsole and other diagnostic tools
2172 * to allow network i/o with interrupts disabled.
2173 */
2174 static void rtl8139_poll_controller(struct net_device *dev)
2175 {
2176 disable_irq(dev->irq);
2177 rtl8139_interrupt(dev->irq, dev);
2178 enable_irq(dev->irq);
2179 }
2180 #endif
2181
2182 static int rtl8139_set_mac_address(struct net_device *dev, void *p)
2183 {
2184 struct rtl8139_private *tp = netdev_priv(dev);
2185 void __iomem *ioaddr = tp->mmio_addr;
2186 struct sockaddr *addr = p;
2187
2188 if (!is_valid_ether_addr(addr->sa_data))
2189 return -EADDRNOTAVAIL;
2190
2191 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
2192
2193 spin_lock_irq(&tp->lock);
2194
2195 RTL_W8_F(Cfg9346, Cfg9346_Unlock);
2196 RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
2197 RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
2198 RTL_W8_F(Cfg9346, Cfg9346_Lock);
2199
2200 spin_unlock_irq(&tp->lock);
2201
2202 return 0;
2203 }
2204
2205 static int rtl8139_close (struct net_device *dev)
2206 {
2207 struct rtl8139_private *tp = netdev_priv(dev);
2208 void __iomem *ioaddr = tp->mmio_addr;
2209 unsigned long flags;
2210
2211 netif_stop_queue(dev);
2212 napi_disable(&tp->napi);
2213
2214 netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n",
2215 RTL_R16(IntrStatus));
2216
2217 spin_lock_irqsave (&tp->lock, flags);
2218
2219 /* Stop the chip's Tx and Rx DMA processes. */
2220 RTL_W8 (ChipCmd, 0);
2221
2222 /* Disable interrupts by clearing the interrupt mask. */
2223 RTL_W16 (IntrMask, 0);
2224
2225 /* Update the error counts. */
2226 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2227 RTL_W32 (RxMissed, 0);
2228
2229 spin_unlock_irqrestore (&tp->lock, flags);
2230
2231 free_irq (dev->irq, dev);
2232
2233 rtl8139_tx_clear (tp);
2234
2235 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
2236 tp->rx_ring, tp->rx_ring_dma);
2237 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
2238 tp->tx_bufs, tp->tx_bufs_dma);
2239 tp->rx_ring = NULL;
2240 tp->tx_bufs = NULL;
2241
2242 /* Green! Put the chip in low-power mode. */
2243 RTL_W8 (Cfg9346, Cfg9346_Unlock);
2244
2245 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
2246 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
2247
2248 return 0;
2249 }
2250
2251
2252 /* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
2253 kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
2254 other threads or interrupts aren't messing with the 8139. */
2255 static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2256 {
2257 struct rtl8139_private *tp = netdev_priv(dev);
2258 void __iomem *ioaddr = tp->mmio_addr;
2259
2260 spin_lock_irq(&tp->lock);
2261 if (rtl_chip_info[tp->chipset].flags & HasLWake) {
2262 u8 cfg3 = RTL_R8 (Config3);
2263 u8 cfg5 = RTL_R8 (Config5);
2264
2265 wol->supported = WAKE_PHY | WAKE_MAGIC
2266 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
2267
2268 wol->wolopts = 0;
2269 if (cfg3 & Cfg3_LinkUp)
2270 wol->wolopts |= WAKE_PHY;
2271 if (cfg3 & Cfg3_Magic)
2272 wol->wolopts |= WAKE_MAGIC;
2273 /* (KON)FIXME: See how netdev_set_wol() handles the
2274 following constants. */
2275 if (cfg5 & Cfg5_UWF)
2276 wol->wolopts |= WAKE_UCAST;
2277 if (cfg5 & Cfg5_MWF)
2278 wol->wolopts |= WAKE_MCAST;
2279 if (cfg5 & Cfg5_BWF)
2280 wol->wolopts |= WAKE_BCAST;
2281 }
2282 spin_unlock_irq(&tp->lock);
2283 }
2284
2285
2286 /* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
2287 that wol points to kernel memory and other threads or interrupts
2288 aren't messing with the 8139. */
2289 static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2290 {
2291 struct rtl8139_private *tp = netdev_priv(dev);
2292 void __iomem *ioaddr = tp->mmio_addr;
2293 u32 support;
2294 u8 cfg3, cfg5;
2295
2296 support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
2297 ? (WAKE_PHY | WAKE_MAGIC
2298 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
2299 : 0);
2300 if (wol->wolopts & ~support)
2301 return -EINVAL;
2302
2303 spin_lock_irq(&tp->lock);
2304 cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
2305 if (wol->wolopts & WAKE_PHY)
2306 cfg3 |= Cfg3_LinkUp;
2307 if (wol->wolopts & WAKE_MAGIC)
2308 cfg3 |= Cfg3_Magic;
2309 RTL_W8 (Cfg9346, Cfg9346_Unlock);
2310 RTL_W8 (Config3, cfg3);
2311 RTL_W8 (Cfg9346, Cfg9346_Lock);
2312
2313 cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
2314 /* (KON)FIXME: These are untested. We may have to set the
2315 CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
2316 documentation. */
2317 if (wol->wolopts & WAKE_UCAST)
2318 cfg5 |= Cfg5_UWF;
2319 if (wol->wolopts & WAKE_MCAST)
2320 cfg5 |= Cfg5_MWF;
2321 if (wol->wolopts & WAKE_BCAST)
2322 cfg5 |= Cfg5_BWF;
2323 RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
2324 spin_unlock_irq(&tp->lock);
2325
2326 return 0;
2327 }
2328
2329 static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
2330 {
2331 struct rtl8139_private *tp = netdev_priv(dev);
2332 strcpy(info->driver, DRV_NAME);
2333 strcpy(info->version, DRV_VERSION);
2334 strcpy(info->bus_info, pci_name(tp->pci_dev));
2335 info->regdump_len = tp->regs_len;
2336 }
2337
2338 static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2339 {
2340 struct rtl8139_private *tp = netdev_priv(dev);
2341 spin_lock_irq(&tp->lock);
2342 mii_ethtool_gset(&tp->mii, cmd);
2343 spin_unlock_irq(&tp->lock);
2344 return 0;
2345 }
2346
2347 static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2348 {
2349 struct rtl8139_private *tp = netdev_priv(dev);
2350 int rc;
2351 spin_lock_irq(&tp->lock);
2352 rc = mii_ethtool_sset(&tp->mii, cmd);
2353 spin_unlock_irq(&tp->lock);
2354 return rc;
2355 }
2356
2357 static int rtl8139_nway_reset(struct net_device *dev)
2358 {
2359 struct rtl8139_private *tp = netdev_priv(dev);
2360 return mii_nway_restart(&tp->mii);
2361 }
2362
2363 static u32 rtl8139_get_link(struct net_device *dev)
2364 {
2365 struct rtl8139_private *tp = netdev_priv(dev);
2366 return mii_link_ok(&tp->mii);
2367 }
2368
2369 static u32 rtl8139_get_msglevel(struct net_device *dev)
2370 {
2371 struct rtl8139_private *tp = netdev_priv(dev);
2372 return tp->msg_enable;
2373 }
2374
2375 static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
2376 {
2377 struct rtl8139_private *tp = netdev_priv(dev);
2378 tp->msg_enable = datum;
2379 }
2380
2381 static int rtl8139_get_regs_len(struct net_device *dev)
2382 {
2383 struct rtl8139_private *tp;
2384 /* TODO: we are too slack to do reg dumping for pio, for now */
2385 if (use_io)
2386 return 0;
2387 tp = netdev_priv(dev);
2388 return tp->regs_len;
2389 }
2390
2391 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
2392 {
2393 struct rtl8139_private *tp;
2394
2395 /* TODO: we are too slack to do reg dumping for pio, for now */
2396 if (use_io)
2397 return;
2398 tp = netdev_priv(dev);
2399
2400 regs->version = RTL_REGS_VER;
2401
2402 spin_lock_irq(&tp->lock);
2403 memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
2404 spin_unlock_irq(&tp->lock);
2405 }
2406
2407 static int rtl8139_get_sset_count(struct net_device *dev, int sset)
2408 {
2409 switch (sset) {
2410 case ETH_SS_STATS:
2411 return RTL_NUM_STATS;
2412 default:
2413 return -EOPNOTSUPP;
2414 }
2415 }
2416
2417 static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
2418 {
2419 struct rtl8139_private *tp = netdev_priv(dev);
2420
2421 data[0] = tp->xstats.early_rx;
2422 data[1] = tp->xstats.tx_buf_mapped;
2423 data[2] = tp->xstats.tx_timeouts;
2424 data[3] = tp->xstats.rx_lost_in_ring;
2425 }
2426
2427 static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
2428 {
2429 memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
2430 }
2431
2432 static const struct ethtool_ops rtl8139_ethtool_ops = {
2433 .get_drvinfo = rtl8139_get_drvinfo,
2434 .get_settings = rtl8139_get_settings,
2435 .set_settings = rtl8139_set_settings,
2436 .get_regs_len = rtl8139_get_regs_len,
2437 .get_regs = rtl8139_get_regs,
2438 .nway_reset = rtl8139_nway_reset,
2439 .get_link = rtl8139_get_link,
2440 .get_msglevel = rtl8139_get_msglevel,
2441 .set_msglevel = rtl8139_set_msglevel,
2442 .get_wol = rtl8139_get_wol,
2443 .set_wol = rtl8139_set_wol,
2444 .get_strings = rtl8139_get_strings,
2445 .get_sset_count = rtl8139_get_sset_count,
2446 .get_ethtool_stats = rtl8139_get_ethtool_stats,
2447 };
2448
2449 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2450 {
2451 struct rtl8139_private *tp = netdev_priv(dev);
2452 int rc;
2453
2454 if (!netif_running(dev))
2455 return -EINVAL;
2456
2457 spin_lock_irq(&tp->lock);
2458 rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
2459 spin_unlock_irq(&tp->lock);
2460
2461 return rc;
2462 }
2463
2464
2465 static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
2466 {
2467 struct rtl8139_private *tp = netdev_priv(dev);
2468 void __iomem *ioaddr = tp->mmio_addr;
2469 unsigned long flags;
2470
2471 if (netif_running(dev)) {
2472 spin_lock_irqsave (&tp->lock, flags);
2473 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2474 RTL_W32 (RxMissed, 0);
2475 spin_unlock_irqrestore (&tp->lock, flags);
2476 }
2477
2478 return &dev->stats;
2479 }
2480
2481 /* Set or clear the multicast filter for this adaptor.
2482 This routine is not state sensitive and need not be SMP locked. */
2483
2484 static void __set_rx_mode (struct net_device *dev)
2485 {
2486 struct rtl8139_private *tp = netdev_priv(dev);
2487 void __iomem *ioaddr = tp->mmio_addr;
2488 u32 mc_filter[2]; /* Multicast hash filter */
2489 int rx_mode;
2490 u32 tmp;
2491
2492 netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08x\n",
2493 dev->flags, RTL_R32(RxConfig));
2494
2495 /* Note: do not reorder, GCC is clever about common statements. */
2496 if (dev->flags & IFF_PROMISC) {
2497 rx_mode =
2498 AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
2499 AcceptAllPhys;
2500 mc_filter[1] = mc_filter[0] = 0xffffffff;
2501 } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
2502 (dev->flags & IFF_ALLMULTI)) {
2503 /* Too many to filter perfectly -- accept all multicasts. */
2504 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
2505 mc_filter[1] = mc_filter[0] = 0xffffffff;
2506 } else {
2507 struct netdev_hw_addr *ha;
2508 rx_mode = AcceptBroadcast | AcceptMyPhys;
2509 mc_filter[1] = mc_filter[0] = 0;
2510 netdev_for_each_mc_addr(ha, dev) {
2511 int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
2512
2513 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
2514 rx_mode |= AcceptMulticast;
2515 }
2516 }
2517
2518 /* We can safely update without stopping the chip. */
2519 tmp = rtl8139_rx_config | rx_mode;
2520 if (tp->rx_config != tmp) {
2521 RTL_W32_F (RxConfig, tmp);
2522 tp->rx_config = tmp;
2523 }
2524 RTL_W32_F (MAR0 + 0, mc_filter[0]);
2525 RTL_W32_F (MAR0 + 4, mc_filter[1]);
2526 }
2527
2528 static void rtl8139_set_rx_mode (struct net_device *dev)
2529 {
2530 unsigned long flags;
2531 struct rtl8139_private *tp = netdev_priv(dev);
2532
2533 spin_lock_irqsave (&tp->lock, flags);
2534 __set_rx_mode(dev);
2535 spin_unlock_irqrestore (&tp->lock, flags);
2536 }
2537
2538 #ifdef CONFIG_PM
2539
2540 static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
2541 {
2542 struct net_device *dev = pci_get_drvdata (pdev);
2543 struct rtl8139_private *tp = netdev_priv(dev);
2544 void __iomem *ioaddr = tp->mmio_addr;
2545 unsigned long flags;
2546
2547 pci_save_state (pdev);
2548
2549 if (!netif_running (dev))
2550 return 0;
2551
2552 netif_device_detach (dev);
2553
2554 spin_lock_irqsave (&tp->lock, flags);
2555
2556 /* Disable interrupts, stop Tx and Rx. */
2557 RTL_W16 (IntrMask, 0);
2558 RTL_W8 (ChipCmd, 0);
2559
2560 /* Update the error counts. */
2561 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2562 RTL_W32 (RxMissed, 0);
2563
2564 spin_unlock_irqrestore (&tp->lock, flags);
2565
2566 pci_set_power_state (pdev, PCI_D3hot);
2567
2568 return 0;
2569 }
2570
2571
2572 static int rtl8139_resume (struct pci_dev *pdev)
2573 {
2574 struct net_device *dev = pci_get_drvdata (pdev);
2575
2576 pci_restore_state (pdev);
2577 if (!netif_running (dev))
2578 return 0;
2579 pci_set_power_state (pdev, PCI_D0);
2580 rtl8139_init_ring (dev);
2581 rtl8139_hw_start (dev);
2582 netif_device_attach (dev);
2583 return 0;
2584 }
2585
2586 #endif /* CONFIG_PM */
2587
2588
2589 static struct pci_driver rtl8139_pci_driver = {
2590 .name = DRV_NAME,
2591 .id_table = rtl8139_pci_tbl,
2592 .probe = rtl8139_init_one,
2593 .remove = __devexit_p(rtl8139_remove_one),
2594 #ifdef CONFIG_PM
2595 .suspend = rtl8139_suspend,
2596 .resume = rtl8139_resume,
2597 #endif /* CONFIG_PM */
2598 };
2599
2600
2601 static int __init rtl8139_init_module (void)
2602 {
2603 /* when we're a module, we always print a version message,
2604 * even if no 8139 board is found.
2605 */
2606 #ifdef MODULE
2607 pr_info(RTL8139_DRIVER_NAME "\n");
2608 #endif
2609
2610 return pci_register_driver(&rtl8139_pci_driver);
2611 }
2612
2613
2614 static void __exit rtl8139_cleanup_module (void)
2615 {
2616 pci_unregister_driver (&rtl8139_pci_driver);
2617 }
2618
2619
2620 module_init(rtl8139_init_module);
2621 module_exit(rtl8139_cleanup_module);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree