Merge git://git.infradead.org/mtd-2.6

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / mtd / nand / au1550nd.c

/*
 *  drivers/mtd/nand/au1550nd.c
 *
 *  Copyright (C) 2004 Embedded Edge, LLC
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>

#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-db1x00/bcsr.h>

/*
 * MTD structure for NAND controller
 */
static struct mtd_info *au1550_mtd = NULL;
static void __iomem *p_nand;
static int nand_width = 1;      /* default x8 */
static void (*au1550_write_byte)(struct mtd_info *, u_char);

/*
 * Define partitions for flash device
 */
static const struct mtd_partition partition_info[] = {
        {
         .name = "NAND FS 0",
         .offset = 0,
         .size = 8 * 1024 * 1024},
        {
         .name = "NAND FS 1",
         .offset = MTDPART_OFS_APPEND,
         .size = MTDPART_SIZ_FULL}
};

/**
 * au_read_byte -  read one byte from the chip
 * @mtd:        MTD device structure
 *
 *  read function for 8bit buswith
 */
static u_char au_read_byte(struct mtd_info *mtd)
{
        struct nand_chip *this = mtd->priv;
        u_char ret = readb(this->IO_ADDR_R);
        au_sync();
        return ret;
}

/**
 * au_write_byte -  write one byte to the chip
 * @mtd:        MTD device structure
 * @byte:       pointer to data byte to write
 *
 *  write function for 8it buswith
 */
static void au_write_byte(struct mtd_info *mtd, u_char byte)
{
        struct nand_chip *this = mtd->priv;
        writeb(byte, this->IO_ADDR_W);
        au_sync();
}

/**
 * au_read_byte16 -  read one byte endianess aware from the chip
 * @mtd:        MTD device structure
 *
 *  read function for 16bit buswith with
 * endianess conversion
 */
static u_char au_read_byte16(struct mtd_info *mtd)
{
        struct nand_chip *this = mtd->priv;
        u_char ret = (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
        au_sync();
        return ret;
}

/**
 * au_write_byte16 -  write one byte endianess aware to the chip
 * @mtd:        MTD device structure
 * @byte:       pointer to data byte to write
 *
 *  write function for 16bit buswith with
 * endianess conversion
 */
static void au_write_byte16(struct mtd_info *mtd, u_char byte)
{
        struct nand_chip *this = mtd->priv;
        writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
        au_sync();
}

/**
 * au_read_word -  read one word from the chip
 * @mtd:        MTD device structure
 *
 *  read function for 16bit buswith without
 * endianess conversion
 */
static u16 au_read_word(struct mtd_info *mtd)
{
        struct nand_chip *this = mtd->priv;
        u16 ret = readw(this->IO_ADDR_R);
        au_sync();
        return ret;
}

/**
 * au_write_buf -  write buffer to chip
 * @mtd:        MTD device structure
 * @buf:        data buffer
 * @len:        number of bytes to write
 *
 *  write function for 8bit buswith
 */
static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
        int i;
        struct nand_chip *this = mtd->priv;

        for (i = 0; i < len; i++) {
                writeb(buf[i], this->IO_ADDR_W);
                au_sync();
        }
}

/**
 * au_read_buf -  read chip data into buffer
 * @mtd:        MTD device structure
 * @buf:        buffer to store date
 * @len:        number of bytes to read
 *
 *  read function for 8bit buswith
 */
static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
        int i;
        struct nand_chip *this = mtd->priv;

        for (i = 0; i < len; i++) {
                buf[i] = readb(this->IO_ADDR_R);
                au_sync();
        }
}

/**
 * au_verify_buf -  Verify chip data against buffer
 * @mtd:        MTD device structure
 * @buf:        buffer containing the data to compare
 * @len:        number of bytes to compare
 *
 *  verify function for 8bit buswith
 */
static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
        int i;
        struct nand_chip *this = mtd->priv;

        for (i = 0; i < len; i++) {
                if (buf[i] != readb(this->IO_ADDR_R))
                        return -EFAULT;
                au_sync();
        }

        return 0;
}

/**
 * au_write_buf16 -  write buffer to chip
 * @mtd:        MTD device structure
 * @buf:        data buffer
 * @len:        number of bytes to write
 *
 *  write function for 16bit buswith
 */
static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
        int i;
        struct nand_chip *this = mtd->priv;
        u16 *p = (u16 *) buf;
        len >>= 1;

        for (i = 0; i < len; i++) {
                writew(p[i], this->IO_ADDR_W);
                au_sync();
        }

}

/**
 * au_read_buf16 -  read chip data into buffer
 * @mtd:        MTD device structure
 * @buf:        buffer to store date
 * @len:        number of bytes to read
 *
 *  read function for 16bit buswith
 */
static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
{
        int i;
        struct nand_chip *this = mtd->priv;
        u16 *p = (u16 *) buf;
        len >>= 1;

        for (i = 0; i < len; i++) {
                p[i] = readw(this->IO_ADDR_R);
                au_sync();
        }
}

/**
 * au_verify_buf16 -  Verify chip data against buffer
 * @mtd:        MTD device structure
 * @buf:        buffer containing the data to compare
 * @len:        number of bytes to compare
 *
 *  verify function for 16bit buswith
 */
static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
        int i;
        struct nand_chip *this = mtd->priv;
        u16 *p = (u16 *) buf;
        len >>= 1;

        for (i = 0; i < len; i++) {
                if (p[i] != readw(this->IO_ADDR_R))
                        return -EFAULT;
                au_sync();
        }
        return 0;
}

/* Select the chip by setting nCE to low */
#define NAND_CTL_SETNCE         1
/* Deselect the chip by setting nCE to high */
#define NAND_CTL_CLRNCE         2
/* Select the command latch by setting CLE to high */
#define NAND_CTL_SETCLE         3
/* Deselect the command latch by setting CLE to low */
#define NAND_CTL_CLRCLE         4
/* Select the address latch by setting ALE to high */
#define NAND_CTL_SETALE         5
/* Deselect the address latch by setting ALE to low */
#define NAND_CTL_CLRALE         6

static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
{
        register struct nand_chip *this = mtd->priv;

        switch (cmd) {

        case NAND_CTL_SETCLE:
                this->IO_ADDR_W = p_nand + MEM_STNAND_CMD;
                break;

        case NAND_CTL_CLRCLE:
                this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
                break;

        case NAND_CTL_SETALE:
                this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR;
                break;

        case NAND_CTL_CLRALE:
                this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
                /* FIXME: Nobody knows why this is necessary,
                 * but it works only that way */
                udelay(1);
                break;

        case NAND_CTL_SETNCE:
                /* assert (force assert) chip enable */
                au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL);
                break;

        case NAND_CTL_CLRNCE:
                /* deassert chip enable */
                au_writel(0, MEM_STNDCTL);
                break;
        }

        this->IO_ADDR_R = this->IO_ADDR_W;

        /* Drain the writebuffer */
        au_sync();
}

int au1550_device_ready(struct mtd_info *mtd)
{
        int ret = (au_readl(MEM_STSTAT) & 0x1) ? 1 : 0;
        au_sync();
        return ret;
}

/**
 * au1550_select_chip - control -CE line
 *      Forbid driving -CE manually permitting the NAND controller to do this.
 *      Keeping -CE asserted during the whole sector reads interferes with the
 *      NOR flash and PCMCIA drivers as it causes contention on the static bus.
 *      We only have to hold -CE low for the NAND read commands since the flash
 *      chip needs it to be asserted during chip not ready time but the NAND
 *      controller keeps it released.
 *
 * @mtd:        MTD device structure
 * @chip:       chipnumber to select, -1 for deselect
 */
static void au1550_select_chip(struct mtd_info *mtd, int chip)
{
}

/**
 * au1550_command - Send command to NAND device
 * @mtd:        MTD device structure
 * @command:    the command to be sent
 * @column:     the column address for this command, -1 if none
 * @page_addr:  the page address for this command, -1 if none
 */
static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
{
        register struct nand_chip *this = mtd->priv;
        int ce_override = 0, i;
        ulong flags;

        /* Begin command latch cycle */
        au1550_hwcontrol(mtd, NAND_CTL_SETCLE);
        /*
         * Write out the command to the device.
         */
        if (command == NAND_CMD_SEQIN) {
                int readcmd;

                if (column >= mtd->writesize) {
                        /* OOB area */
                        column -= mtd->writesize;
                        readcmd = NAND_CMD_READOOB;
                } else if (column < 256) {
                        /* First 256 bytes --> READ0 */
                        readcmd = NAND_CMD_READ0;
                } else {
                        column -= 256;
                        readcmd = NAND_CMD_READ1;
                }
                au1550_write_byte(mtd, readcmd);
        }
        au1550_write_byte(mtd, command);

        /* Set ALE and clear CLE to start address cycle */
        au1550_hwcontrol(mtd, NAND_CTL_CLRCLE);

        if (column != -1 || page_addr != -1) {
                au1550_hwcontrol(mtd, NAND_CTL_SETALE);

                /* Serially input address */
                if (column != -1) {
                        /* Adjust columns for 16 bit buswidth */
                        if (this->options & NAND_BUSWIDTH_16)
                                column >>= 1;
                        au1550_write_byte(mtd, column);
                }
                if (page_addr != -1) {
                        au1550_write_byte(mtd, (u8)(page_addr & 0xff));

                        if (command == NAND_CMD_READ0 ||
                            command == NAND_CMD_READ1 ||
                            command == NAND_CMD_READOOB) {
                                /*
                                 * NAND controller will release -CE after
                                 * the last address byte is written, so we'll
                                 * have to forcibly assert it. No interrupts
                                 * are allowed while we do this as we don't
                                 * want the NOR flash or PCMCIA drivers to
                                 * steal our precious bytes of data...
                                 */
                                ce_override = 1;
                                local_irq_save(flags);
                                au1550_hwcontrol(mtd, NAND_CTL_SETNCE);
                        }

                        au1550_write_byte(mtd, (u8)(page_addr >> 8));

                        /* One more address cycle for devices > 32MiB */
                        if (this->chipsize > (32 << 20))
                                au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f));
                }
                /* Latch in address */
                au1550_hwcontrol(mtd, NAND_CTL_CLRALE);
        }

        /*
         * Program and erase have their own busy handlers.
         * Status and sequential in need no delay.
         */
        switch (command) {

        case NAND_CMD_PAGEPROG:
        case NAND_CMD_ERASE1:
        case NAND_CMD_ERASE2:
        case NAND_CMD_SEQIN:
        case NAND_CMD_STATUS:
                return;

        case NAND_CMD_RESET:
                break;

        case NAND_CMD_READ0:
        case NAND_CMD_READ1:
        case NAND_CMD_READOOB:
                /* Check if we're really driving -CE low (just in case) */
                if (unlikely(!ce_override))
                        break;

                /* Apply a short delay always to ensure that we do wait tWB. */
                ndelay(100);
                /* Wait for a chip to become ready... */
                for (i = this->chip_delay; !this->dev_ready(mtd) && i > 0; --i)
                        udelay(1);

                /* Release -CE and re-enable interrupts. */
                au1550_hwcontrol(mtd, NAND_CTL_CLRNCE);
                local_irq_restore(flags);
                return;
        }
        /* Apply this short delay always to ensure that we do wait tWB. */
        ndelay(100);

        while(!this->dev_ready(mtd));
}


/*
 * Main initialization routine
 */
static int __init au1xxx_nand_init(void)
{
        struct nand_chip *this;
        u16 boot_swapboot = 0;  /* default value */
        int retval;
        u32 mem_staddr;
        u32 nand_phys;

        /* Allocate memory for MTD device structure and private data */
        au1550_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
        if (!au1550_mtd) {
                printk("Unable to allocate NAND MTD dev structure.\n");
                return -ENOMEM;
        }

        /* Get pointer to private data */
        this = (struct nand_chip *)(&au1550_mtd[1]);

        /* Link the private data with the MTD structure */
        au1550_mtd->priv = this;
        au1550_mtd->owner = THIS_MODULE;


        /* MEM_STNDCTL: disable ints, disable nand boot */
        au_writel(0, MEM_STNDCTL);

#ifdef CONFIG_MIPS_PB1550
        /* set gpio206 high */
        gpio_direction_input(206);

        boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);

        switch (boot_swapboot) {
        case 0:
        case 2:
        case 8:
        case 0xC:
        case 0xD:
                /* x16 NAND Flash */
                nand_width = 0;
                break;
        case 1:
        case 9:
        case 3:
        case 0xE:
        case 0xF:
                /* x8 NAND Flash */
                nand_width = 1;
                break;
        default:
                printk("Pb1550 NAND: bad boot:swap\n");
                retval = -EINVAL;
                goto outmem;
        }
#endif

        /* Configure chip-select; normally done by boot code, e.g. YAMON */
#ifdef NAND_STCFG
        if (NAND_CS == 0) {
                au_writel(NAND_STCFG,  MEM_STCFG0);
                au_writel(NAND_STTIME, MEM_STTIME0);
                au_writel(NAND_STADDR, MEM_STADDR0);
        }
        if (NAND_CS == 1) {
                au_writel(NAND_STCFG,  MEM_STCFG1);
                au_writel(NAND_STTIME, MEM_STTIME1);
                au_writel(NAND_STADDR, MEM_STADDR1);
        }
        if (NAND_CS == 2) {
                au_writel(NAND_STCFG,  MEM_STCFG2);
                au_writel(NAND_STTIME, MEM_STTIME2);
                au_writel(NAND_STADDR, MEM_STADDR2);
        }
        if (NAND_CS == 3) {
                au_writel(NAND_STCFG,  MEM_STCFG3);
                au_writel(NAND_STTIME, MEM_STTIME3);
                au_writel(NAND_STADDR, MEM_STADDR3);
        }
#endif

        /* Locate NAND chip-select in order to determine NAND phys address */
        mem_staddr = 0x00000000;
        if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0))
                mem_staddr = au_readl(MEM_STADDR0);
        else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1))
                mem_staddr = au_readl(MEM_STADDR1);
        else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2))
                mem_staddr = au_readl(MEM_STADDR2);
        else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3))
                mem_staddr = au_readl(MEM_STADDR3);

        if (mem_staddr == 0x00000000) {
                printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n");
                kfree(au1550_mtd);
                return 1;
        }
        nand_phys = (mem_staddr << 4) & 0xFFFC0000;

        p_nand = ioremap(nand_phys, 0x1000);

        /* make controller and MTD agree */
        if (NAND_CS == 0)
                nand_width = au_readl(MEM_STCFG0) & (1 << 22);
        if (NAND_CS == 1)
                nand_width = au_readl(MEM_STCFG1) & (1 << 22);
        if (NAND_CS == 2)
                nand_width = au_readl(MEM_STCFG2) & (1 << 22);
        if (NAND_CS == 3)
                nand_width = au_readl(MEM_STCFG3) & (1 << 22);

        /* Set address of hardware control function */
        this->dev_ready = au1550_device_ready;
        this->select_chip = au1550_select_chip;
        this->cmdfunc = au1550_command;

        /* 30 us command delay time */
        this->chip_delay = 30;
        this->ecc.mode = NAND_ECC_SOFT;

        this->options = NAND_NO_AUTOINCR;

        if (!nand_width)
                this->options |= NAND_BUSWIDTH_16;

        this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte;
        au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
        this->read_word = au_read_word;
        this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf;
        this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf;
        this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;

        /* Scan to find existence of the device */
        if (nand_scan(au1550_mtd, 1)) {
                retval = -ENXIO;
                goto outio;
        }

        /* Register the partitions */
        mtd_device_register(au1550_mtd, partition_info,
                            ARRAY_SIZE(partition_info));

        return 0;

 outio:
        iounmap(p_nand);

 outmem:
        kfree(au1550_mtd);
        return retval;
}

module_init(au1xxx_nand_init);

/*
 * Clean up routine
 */
static void __exit au1550_cleanup(void)
{
        /* Release resources, unregister device */
        nand_release(au1550_mtd);

        /* Free the MTD device structure */
        kfree(au1550_mtd);

        /* Unmap */
        iounmap(p_nand);
}

module_exit(au1550_cleanup);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Embedded Edge, LLC");
MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on Pb1550 board");