2 * w83627hf/thf WDT driver
4 * (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
5 * added support for W83627THF.
7 * (c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com>
9 * Based on advantechwdt.c which is based on wdt.c.
10 * Original copyright messages:
12 * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
14 * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
15 * All Rights Reserved.
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License
19 * as published by the Free Software Foundation; either version
20 * 2 of the License, or (at your option) any later version.
22 * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
23 * warranty for any of this software. This material is provided
24 * "AS-IS" and at no charge.
26 * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
29 #include <linux/module.h>
30 #include <linux/moduleparam.h>
31 #include <linux/types.h>
32 #include <linux/miscdevice.h>
33 #include <linux/watchdog.h>
35 #include <linux/ioport.h>
36 #include <linux/notifier.h>
37 #include <linux/reboot.h>
38 #include <linux/init.h>
39 #include <linux/spinlock.h>
41 #include <linux/uaccess.h>
43 #include <asm/system.h>
45 #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
46 #define PFX WATCHDOG_NAME ": "
47 #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
49 static unsigned long wdt_is_open
;
50 static char expect_close
;
51 static DEFINE_SPINLOCK(io_lock
);
53 /* You must set this - there is no sane way to probe for this board. */
54 static int wdt_io
= 0x2E;
55 module_param(wdt_io
, int, 0);
56 MODULE_PARM_DESC(wdt_io
, "w83627hf/thf WDT io port (default 0x2E)");
58 static int timeout
= WATCHDOG_TIMEOUT
; /* in seconds */
59 module_param(timeout
, int, 0);
60 MODULE_PARM_DESC(timeout
,
61 "Watchdog timeout in seconds. 1 <= timeout <= 255, default="
62 __MODULE_STRING(WATCHDOG_TIMEOUT
) ".");
64 static int nowayout
= WATCHDOG_NOWAYOUT
;
65 module_param(nowayout
, int, 0);
66 MODULE_PARM_DESC(nowayout
,
67 "Watchdog cannot be stopped once started (default="
68 __MODULE_STRING(WATCHDOG_NOWAYOUT
) ")");
74 #define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */
75 #define WDT_EFIR (wdt_io+0) /* Extended Function Index Register
77 #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
79 static void w83627hf_select_wd_register(void)
82 outb_p(0x87, WDT_EFER
); /* Enter extended function mode */
83 outb_p(0x87, WDT_EFER
); /* Again according to manual */
85 outb(0x20, WDT_EFER
); /* check chip version */
87 if (c
== 0x82) { /* W83627THF */
88 outb_p(0x2b, WDT_EFER
); /* select GPIO3 */
89 c
= ((inb_p(WDT_EFDR
) & 0xf7) | 0x04); /* select WDT0 */
90 outb_p(0x2b, WDT_EFER
);
91 outb_p(c
, WDT_EFDR
); /* set GPIO3 to WDT0 */
92 } else if (c
== 0x88 || c
== 0xa0) { /* W83627EHF / W83627DHG */
93 outb_p(0x2d, WDT_EFER
); /* select GPIO5 */
94 c
= inb_p(WDT_EFDR
) & ~0x01; /* PIN77 -> WDT0# */
95 outb_p(0x2d, WDT_EFER
);
96 outb_p(c
, WDT_EFDR
); /* set GPIO5 to WDT0 */
99 outb_p(0x07, WDT_EFER
); /* point to logical device number reg */
100 outb_p(0x08, WDT_EFDR
); /* select logical device 8 (GPIO2) */
101 outb_p(0x30, WDT_EFER
); /* select CR30 */
102 outb_p(0x01, WDT_EFDR
); /* set bit 0 to activate GPIO2 */
105 static void w83627hf_unselect_wd_register(void)
107 outb_p(0xAA, WDT_EFER
); /* Leave extended function mode */
110 /* tyan motherboards seem to set F5 to 0x4C ?
111 * So explicitly init to appropriate value. */
113 static void w83627hf_init(void)
117 w83627hf_select_wd_register();
119 outb_p(0xF6, WDT_EFER
); /* Select CRF6 */
120 t
= inb_p(WDT_EFDR
); /* read CRF6 */
123 "Watchdog already running. Resetting timeout to %d sec\n",
125 outb_p(timeout
, WDT_EFDR
); /* Write back to CRF6 */
128 outb_p(0xF5, WDT_EFER
); /* Select CRF5 */
129 t
= inb_p(WDT_EFDR
); /* read CRF5 */
130 t
&= ~0x0C; /* set second mode & disable keyboard
131 turning off watchdog */
132 t
|= 0x02; /* enable the WDTO# output low pulse
133 to the KBRST# pin (PIN60) */
134 outb_p(t
, WDT_EFDR
); /* Write back to CRF5 */
136 outb_p(0xF7, WDT_EFER
); /* Select CRF7 */
137 t
= inb_p(WDT_EFDR
); /* read CRF7 */
138 t
&= ~0xC0; /* disable keyboard & mouse turning off
140 outb_p(t
, WDT_EFDR
); /* Write back to CRF7 */
142 w83627hf_unselect_wd_register();
145 static void wdt_ctrl(int timeout
)
149 w83627hf_select_wd_register();
151 outb_p(0xF6, WDT_EFER
); /* Select CRF6 */
152 outb_p(timeout
, WDT_EFDR
); /* Write Timeout counter to CRF6 */
154 w83627hf_unselect_wd_register();
156 spin_unlock(&io_lock
);
159 static int wdt_ping(void)
165 static int wdt_disable(void)
171 static int wdt_set_heartbeat(int t
)
173 if (t
< 1 || t
> 255)
179 static ssize_t
wdt_write(struct file
*file
, const char __user
*buf
,
180 size_t count
, loff_t
*ppos
)
188 for (i
= 0; i
!= count
; i
++) {
190 if (get_user(c
, buf
+ i
))
201 static long wdt_ioctl(struct file
*file
, unsigned int cmd
, unsigned long arg
)
203 void __user
*argp
= (void __user
*)arg
;
204 int __user
*p
= argp
;
206 static const struct watchdog_info ident
= {
207 .options
= WDIOF_KEEPALIVEPING
| WDIOF_SETTIMEOUT
|
209 .firmware_version
= 1,
210 .identity
= "W83627HF WDT",
214 case WDIOC_GETSUPPORT
:
215 if (copy_to_user(argp
, &ident
, sizeof(ident
)))
218 case WDIOC_GETSTATUS
:
219 case WDIOC_GETBOOTSTATUS
:
220 return put_user(0, p
);
221 case WDIOC_SETOPTIONS
:
223 int options
, retval
= -EINVAL
;
225 if (get_user(options
, p
))
227 if (options
& WDIOS_DISABLECARD
) {
231 if (options
& WDIOS_ENABLECARD
) {
237 case WDIOC_KEEPALIVE
:
240 case WDIOC_SETTIMEOUT
:
241 if (get_user(new_timeout
, p
))
243 if (wdt_set_heartbeat(new_timeout
))
247 case WDIOC_GETTIMEOUT
:
248 return put_user(timeout
, p
);
255 static int wdt_open(struct inode
*inode
, struct file
*file
)
257 if (test_and_set_bit(0, &wdt_is_open
))
264 return nonseekable_open(inode
, file
);
267 static int wdt_close(struct inode
*inode
, struct file
*file
)
269 if (expect_close
== 42)
273 "Unexpected close, not stopping watchdog!\n");
277 clear_bit(0, &wdt_is_open
);
282 * Notifier for system down
285 static int wdt_notify_sys(struct notifier_block
*this, unsigned long code
,
288 if (code
== SYS_DOWN
|| code
== SYS_HALT
)
289 wdt_disable(); /* Turn the WDT off */
298 static const struct file_operations wdt_fops
= {
299 .owner
= THIS_MODULE
,
302 .unlocked_ioctl
= wdt_ioctl
,
304 .release
= wdt_close
,
307 static struct miscdevice wdt_miscdev
= {
308 .minor
= WATCHDOG_MINOR
,
314 * The WDT needs to learn about soft shutdowns in order to
315 * turn the timebomb registers off.
318 static struct notifier_block wdt_notifier
= {
319 .notifier_call
= wdt_notify_sys
,
322 static int __init
wdt_init(void)
326 printk(KERN_INFO
"WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising.\n");
328 if (wdt_set_heartbeat(timeout
)) {
329 wdt_set_heartbeat(WATCHDOG_TIMEOUT
);
331 "timeout value must be 1 <= timeout <= 255, using %d\n",
335 if (!request_region(wdt_io
, 1, WATCHDOG_NAME
)) {
336 printk(KERN_ERR PFX
"I/O address 0x%04x already in use\n",
344 ret
= register_reboot_notifier(&wdt_notifier
);
347 "cannot register reboot notifier (err=%d)\n", ret
);
351 ret
= misc_register(&wdt_miscdev
);
354 "cannot register miscdev on minor=%d (err=%d)\n",
355 WATCHDOG_MINOR
, ret
);
360 "initialized. timeout=%d sec (nowayout=%d)\n",
366 unregister_reboot_notifier(&wdt_notifier
);
368 release_region(wdt_io
, 1);
372 static void __exit
wdt_exit(void)
374 misc_deregister(&wdt_miscdev
);
375 unregister_reboot_notifier(&wdt_notifier
);
376 release_region(wdt_io
, 1);
379 module_init(wdt_init
);
380 module_exit(wdt_exit
);
382 MODULE_LICENSE("GPL");
383 MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>");
384 MODULE_DESCRIPTION("w83627hf/thf WDT driver");
385 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR
);