?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
mac80211: fix race condition caused by late addBA response
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / cs89x0.c
blob537a4b2e2020032a2d11cfeff92dfdd0c39d71a2
1 /* cs89x0.c: A Crystal Semiconductor (Now Cirrus Logic) CS89[02]0
2 * driver for linux.
3 */
4
5 /*
6 Written 1996 by Russell Nelson, with reference to skeleton.c
7 written 1993-1994 by Donald Becker.
8
9 This software may be used and distributed according to the terms
10 of the GNU General Public License, incorporated herein by reference.
11
12 The author may be reached at nelson@crynwr.com, Crynwr
13 Software, 521 Pleasant Valley Rd., Potsdam, NY 13676
14
15 Changelog:
16
17 Mike Cruse : mcruse@cti-ltd.com
18 : Changes for Linux 2.0 compatibility.
19 : Added dev_id parameter in net_interrupt(),
20 : request_irq() and free_irq(). Just NULL for now.
21
22 Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
23 : in net_open() and net_close() so kerneld would know
24 : that the module is in use and wouldn't eject the
25 : driver prematurely.
26
27 Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
28 : as an example. Disabled autoprobing in init_module(),
29 : not a good thing to do to other devices while Linux
30 : is running from all accounts.
31
32 Russ Nelson : Jul 13 1998. Added RxOnly DMA support.
33
34 Melody Lee : Aug 10 1999. Changes for Linux 2.2.5 compatibility.
35 : email: ethernet@crystal.cirrus.com
36
37 Alan Cox : Removed 1.2 support, added 2.1 extra counters.
38
39 Andrew Morton : Kernel 2.3.48
40 : Handle kmalloc() failures
41 : Other resource allocation fixes
42 : Add SMP locks
43 : Integrate Russ Nelson's ALLOW_DMA functionality back in.
44 : If ALLOW_DMA is true, make DMA runtime selectable
45 : Folded in changes from Cirrus (Melody Lee
46 : <klee@crystal.cirrus.com>)
47 : Don't call netif_wake_queue() in net_send_packet()
48 : Fixed an out-of-mem bug in dma_rx()
49 : Updated Documentation/networking/cs89x0.txt
50
51 Andrew Morton : Kernel 2.3.99-pre1
52 : Use skb_reserve to longword align IP header (two places)
53 : Remove a delay loop from dma_rx()
54 : Replace '100' with HZ
55 : Clean up a couple of skb API abuses
56 : Added 'cs89x0_dma=N' kernel boot option
57 : Correctly initialise lp->lock in non-module compile
58
59 Andrew Morton : Kernel 2.3.99-pre4-1
60 : MOD_INC/DEC race fix (see
61 : http://www.uwsg.indiana.edu/hypermail/linux/kernel/0003.3/1532.html)
62
63 Andrew Morton : Kernel 2.4.0-test7-pre2
64 : Enhanced EEPROM support to cover more devices,
65 : abstracted IRQ mapping to support CONFIG_ARCH_CLPS7500 arch
66 : (Jason Gunthorpe <jgg@ualberta.ca>)
67
68 Andrew Morton : Kernel 2.4.0-test11-pre4
69 : Use dev->name in request_*() (Andrey Panin)
70 : Fix an error-path memleak in init_module()
71 : Preserve return value from request_irq()
72 : Fix type of `media' module parm (Keith Owens)
73 : Use SET_MODULE_OWNER()
74 : Tidied up strange request_irq() abuse in net_open().
75
76 Andrew Morton : Kernel 2.4.3-pre1
77 : Request correct number of pages for DMA (Hugh Dickens)
78 : Select PP_ChipID _after_ unregister_netdev in cleanup_module()
79 : because unregister_netdev() calls get_stats.
80 : Make `version[]' __initdata
81 : Uninlined the read/write reg/word functions.
82
83 Oskar Schirmer : oskar@scara.com
84 : HiCO.SH4 (superh) support added (irq#1, cs89x0_media=)
85
86 Deepak Saxena : dsaxena@plexity.net
87 : Intel IXDP2x01 (XScale ixp2x00 NPU) platform support
88
89 Dmitry Pervushin : dpervushin@ru.mvista.com
90 : PNX010X platform support
91
92 Deepak Saxena : dsaxena@plexity.net
93 : Intel IXDP2351 platform support
94
95 Dmitry Pervushin : dpervushin@ru.mvista.com
96 : PNX010X platform support
97
98 Domenico Andreoli : cavokz@gmail.com
99 : QQ2440 platform support
100
101 */
102
103 /* Always include 'config.h' first in case the user wants to turn on
104 or override something. */
105 #include <linux/module.h>
106
107 /*
108 * Set this to zero to disable DMA code
109 *
110 * Note that even if DMA is turned off we still support the 'dma' and 'use_dma'
111 * module options so we don't break any startup scripts.
112 */
113 #ifndef CONFIG_ISA_DMA_API
114 #define ALLOW_DMA 0
115 #else
116 #define ALLOW_DMA 1
117 #endif
118
119 /*
120 * Set this to zero to remove all the debug statements via
121 * dead code elimination
122 */
123 #define DEBUGGING 1
124
125 /*
126 Sources:
127
128 Crynwr packet driver epktisa.
129
130 Crystal Semiconductor data sheets.
131
132 */
133
134 #include <linux/errno.h>
135 #include <linux/netdevice.h>
136 #include <linux/etherdevice.h>
137 #include <linux/kernel.h>
138 #include <linux/types.h>
139 #include <linux/fcntl.h>
140 #include <linux/interrupt.h>
141 #include <linux/ioport.h>
142 #include <linux/in.h>
143 #include <linux/skbuff.h>
144 #include <linux/spinlock.h>
145 #include <linux/string.h>
146 #include <linux/init.h>
147 #include <linux/bitops.h>
148 #include <linux/delay.h>
149 #include <linux/gfp.h>
150
151 #include <asm/system.h>
152 #include <asm/io.h>
153 #include <asm/irq.h>
154 #if ALLOW_DMA
155 #include <asm/dma.h>
156 #endif
157
158 #include "cs89x0.h"
159
160 static char version[] __initdata =
161 "cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
162
163 #define DRV_NAME "cs89x0"
164
165 /* First, a few definitions that the brave might change.
166 A zero-terminated list of I/O addresses to be probed. Some special flags..
167 Addr & 1 = Read back the address port, look for signature and reset
168 the page window before probing
169 Addr & 3 = Reset the page window and probe
170 The CLPS eval board has the Cirrus chip at 0x80090300, in ARM IO space,
171 but it is possible that a Cirrus board could be plugged into the ISA
172 slots. */
173 /* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps
174 them to system IRQ numbers. This mapping is card specific and is set to
175 the configuration of the Cirrus Eval board for this chip. */
176 #if defined(CONFIG_MACH_IXDP2351)
177 static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
178 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
179 #elif defined(CONFIG_ARCH_IXDP2X01)
180 static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
181 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
182 #elif defined(CONFIG_MACH_QQ2440)
183 #include <mach/qq2440.h>
184 static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
185 static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
186 #elif defined(CONFIG_MACH_MX31ADS)
187 #include <mach/board-mx31ads.h>
188 static unsigned int netcard_portlist[] __used __initdata = {
189 PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0
190 };
191 static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0};
192 #else
193 static unsigned int netcard_portlist[] __used __initdata =
194 { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
195 static unsigned int cs8900_irq_map[] = {10,11,12,5};
196 #endif
197
198 #if DEBUGGING
199 static unsigned int net_debug = DEBUGGING;
200 #else
201 #define net_debug 0 /* gcc will remove all the debug code for us */
202 #endif
203
204 /* The number of low I/O ports used by the ethercard. */
205 #define NETCARD_IO_EXTENT 16
206
207 /* we allow the user to override various values normally set in the EEPROM */
208 #define FORCE_RJ45 0x0001 /* pick one of these three */
209 #define FORCE_AUI 0x0002
210 #define FORCE_BNC 0x0004
211
212 #define FORCE_AUTO 0x0010 /* pick one of these three */
213 #define FORCE_HALF 0x0020
214 #define FORCE_FULL 0x0030
215
216 /* Information that need to be kept for each board. */
217 struct net_local {
218 int chip_type; /* one of: CS8900, CS8920, CS8920M */
219 char chip_revision; /* revision letter of the chip ('A'...) */
220 int send_cmd; /* the proper send command: TX_NOW, TX_AFTER_381, or TX_AFTER_ALL */
221 int auto_neg_cnf; /* auto-negotiation word from EEPROM */
222 int adapter_cnf; /* adapter configuration from EEPROM */
223 int isa_config; /* ISA configuration from EEPROM */
224 int irq_map; /* IRQ map from EEPROM */
225 int rx_mode; /* what mode are we in? 0, RX_MULTCAST_ACCEPT, or RX_ALL_ACCEPT */
226 int curr_rx_cfg; /* a copy of PP_RxCFG */
227 int linectl; /* either 0 or LOW_RX_SQUELCH, depending on configuration. */
228 int send_underrun; /* keep track of how many underruns in a row we get */
229 int force; /* force various values; see FORCE* above. */
230 spinlock_t lock;
231 #if ALLOW_DMA
232 int use_dma; /* Flag: we're using dma */
233 int dma; /* DMA channel */
234 int dmasize; /* 16 or 64 */
235 unsigned char *dma_buff; /* points to the beginning of the buffer */
236 unsigned char *end_dma_buff; /* points to the end of the buffer */
237 unsigned char *rx_dma_ptr; /* points to the next packet */
238 #endif
239 };
240
241 /* Index to functions, as function prototypes. */
242
243 static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular);
244 static int net_open(struct net_device *dev);
245 static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev);
246 static irqreturn_t net_interrupt(int irq, void *dev_id);
247 static void set_multicast_list(struct net_device *dev);
248 static void net_timeout(struct net_device *dev);
249 static void net_rx(struct net_device *dev);
250 static int net_close(struct net_device *dev);
251 static struct net_device_stats *net_get_stats(struct net_device *dev);
252 static void reset_chip(struct net_device *dev);
253 static int get_eeprom_data(struct net_device *dev, int off, int len, int *buffer);
254 static int get_eeprom_cksum(int off, int len, int *buffer);
255 static int set_mac_address(struct net_device *dev, void *addr);
256 static void count_rx_errors(int status, struct net_device *dev);
257 #ifdef CONFIG_NET_POLL_CONTROLLER
258 static void net_poll_controller(struct net_device *dev);
259 #endif
260 #if ALLOW_DMA
261 static void get_dma_channel(struct net_device *dev);
262 static void release_dma_buff(struct net_local *lp);
263 #endif
264
265 /* Example routines you must write ;->. */
266 #define tx_done(dev) 1
267
268 /*
269 * Permit 'cs89x0_dma=N' in the kernel boot environment
270 */
271 #if !defined(MODULE) && (ALLOW_DMA != 0)
272 static int g_cs89x0_dma;
273
274 static int __init dma_fn(char *str)
275 {
276 g_cs89x0_dma = simple_strtol(str,NULL,0);
277 return 1;
278 }
279
280 __setup("cs89x0_dma=", dma_fn);
281 #endif /* !defined(MODULE) && (ALLOW_DMA != 0) */
282
283 #ifndef MODULE
284 static int g_cs89x0_media__force;
285
286 static int __init media_fn(char *str)
287 {
288 if (!strcmp(str, "rj45")) g_cs89x0_media__force = FORCE_RJ45;
289 else if (!strcmp(str, "aui")) g_cs89x0_media__force = FORCE_AUI;
290 else if (!strcmp(str, "bnc")) g_cs89x0_media__force = FORCE_BNC;
291 return 1;
292 }
293
294 __setup("cs89x0_media=", media_fn);
295
296
297 /* Check for a network adaptor of this type, and return '0' iff one exists.
298 If dev->base_addr == 0, probe all likely locations.
299 If dev->base_addr == 1, always return failure.
300 If dev->base_addr == 2, allocate space for the device and return success
301 (detachable devices only).
302 Return 0 on success.
303 */
304
305 struct net_device * __init cs89x0_probe(int unit)
306 {
307 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
308 unsigned *port;
309 int err = 0;
310 int irq;
311 int io;
312
313 if (!dev)
314 return ERR_PTR(-ENODEV);
315
316 sprintf(dev->name, "eth%d", unit);
317 netdev_boot_setup_check(dev);
318 io = dev->base_addr;
319 irq = dev->irq;
320
321 if (net_debug)
322 printk("cs89x0:cs89x0_probe(0x%x)\n", io);
323
324 if (io > 0x1ff) { /* Check a single specified location. */
325 err = cs89x0_probe1(dev, io, 0);
326 } else if (io != 0) { /* Don't probe at all. */
327 err = -ENXIO;
328 } else {
329 for (port = netcard_portlist; *port; port++) {
330 if (cs89x0_probe1(dev, *port, 0) == 0)
331 break;
332 dev->irq = irq;
333 }
334 if (!*port)
335 err = -ENODEV;
336 }
337 if (err)
338 goto out;
339 return dev;
340 out:
341 free_netdev(dev);
342 printk(KERN_WARNING "cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
343 return ERR_PTR(err);
344 }
345 #endif
346
347 #if defined(CONFIG_MACH_IXDP2351)
348 static u16
349 readword(unsigned long base_addr, int portno)
350 {
351 return __raw_readw(base_addr + (portno << 1));
352 }
353
354 static void
355 writeword(unsigned long base_addr, int portno, u16 value)
356 {
357 __raw_writew(value, base_addr + (portno << 1));
358 }
359 #elif defined(CONFIG_ARCH_IXDP2X01)
360 static u16
361 readword(unsigned long base_addr, int portno)
362 {
363 return __raw_readl(base_addr + (portno << 1));
364 }
365
366 static void
367 writeword(unsigned long base_addr, int portno, u16 value)
368 {
369 __raw_writel(value, base_addr + (portno << 1));
370 }
371 #else
372 static u16
373 readword(unsigned long base_addr, int portno)
374 {
375 return inw(base_addr + portno);
376 }
377
378 static void
379 writeword(unsigned long base_addr, int portno, u16 value)
380 {
381 outw(value, base_addr + portno);
382 }
383 #endif
384
385 static void
386 readwords(unsigned long base_addr, int portno, void *buf, int length)
387 {
388 u8 *buf8 = (u8 *)buf;
389
390 do {
391 u16 tmp16;
392
393 tmp16 = readword(base_addr, portno);
394 *buf8++ = (u8)tmp16;
395 *buf8++ = (u8)(tmp16 >> 8);
396 } while (--length);
397 }
398
399 static void
400 writewords(unsigned long base_addr, int portno, void *buf, int length)
401 {
402 u8 *buf8 = (u8 *)buf;
403
404 do {
405 u16 tmp16;
406
407 tmp16 = *buf8++;
408 tmp16 |= (*buf8++) << 8;
409 writeword(base_addr, portno, tmp16);
410 } while (--length);
411 }
412
413 static u16
414 readreg(struct net_device *dev, u16 regno)
415 {
416 writeword(dev->base_addr, ADD_PORT, regno);
417 return readword(dev->base_addr, DATA_PORT);
418 }
419
420 static void
421 writereg(struct net_device *dev, u16 regno, u16 value)
422 {
423 writeword(dev->base_addr, ADD_PORT, regno);
424 writeword(dev->base_addr, DATA_PORT, value);
425 }
426
427 static int __init
428 wait_eeprom_ready(struct net_device *dev)
429 {
430 int timeout = jiffies;
431 /* check to see if the EEPROM is ready, a timeout is used -
432 just in case EEPROM is ready when SI_BUSY in the
433 PP_SelfST is clear */
434 while(readreg(dev, PP_SelfST) & SI_BUSY)
435 if (jiffies - timeout >= 40)
436 return -1;
437 return 0;
438 }
439
440 static int __init
441 get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
442 {
443 int i;
444
445 if (net_debug > 3) printk("EEPROM data from %x for %x:\n",off,len);
446 for (i = 0; i < len; i++) {
447 if (wait_eeprom_ready(dev) < 0) return -1;
448 /* Now send the EEPROM read command and EEPROM location to read */
449 writereg(dev, PP_EECMD, (off + i) | EEPROM_READ_CMD);
450 if (wait_eeprom_ready(dev) < 0) return -1;
451 buffer[i] = readreg(dev, PP_EEData);
452 if (net_debug > 3) printk("%04x ", buffer[i]);
453 }
454 if (net_debug > 3) printk("\n");
455 return 0;
456 }
457
458 static int __init
459 get_eeprom_cksum(int off, int len, int *buffer)
460 {
461 int i, cksum;
462
463 cksum = 0;
464 for (i = 0; i < len; i++)
465 cksum += buffer[i];
466 cksum &= 0xffff;
467 if (cksum == 0)
468 return 0;
469 return -1;
470 }
471
472 #ifdef CONFIG_NET_POLL_CONTROLLER
473 /*
474 * Polling receive - used by netconsole and other diagnostic tools
475 * to allow network i/o with interrupts disabled.
476 */
477 static void net_poll_controller(struct net_device *dev)
478 {
479 disable_irq(dev->irq);
480 net_interrupt(dev->irq, dev);
481 enable_irq(dev->irq);
482 }
483 #endif
484
485 static const struct net_device_ops net_ops = {
486 .ndo_open = net_open,
487 .ndo_stop = net_close,
488 .ndo_tx_timeout = net_timeout,
489 .ndo_start_xmit = net_send_packet,
490 .ndo_get_stats = net_get_stats,
491 .ndo_set_multicast_list = set_multicast_list,
492 .ndo_set_mac_address = set_mac_address,
493 #ifdef CONFIG_NET_POLL_CONTROLLER
494 .ndo_poll_controller = net_poll_controller,
495 #endif
496 .ndo_change_mtu = eth_change_mtu,
497 .ndo_validate_addr = eth_validate_addr,
498 };
499
500 /* This is the real probe routine. Linux has a history of friendly device
501 probes on the ISA bus. A good device probes avoids doing writes, and
502 verifies that the correct device exists and functions.
503 Return 0 on success.
504 */
505
506 static int __init
507 cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
508 {
509 struct net_local *lp = netdev_priv(dev);
510 static unsigned version_printed;
511 int i;
512 int tmp;
513 unsigned rev_type = 0;
514 int eeprom_buff[CHKSUM_LEN];
515 int retval;
516
517 /* Initialize the device structure. */
518 if (!modular) {
519 memset(lp, 0, sizeof(*lp));
520 spin_lock_init(&lp->lock);
521 #ifndef MODULE
522 #if ALLOW_DMA
523 if (g_cs89x0_dma) {
524 lp->use_dma = 1;
525 lp->dma = g_cs89x0_dma;
526 lp->dmasize = 16; /* Could make this an option... */
527 }
528 #endif
529 lp->force = g_cs89x0_media__force;
530 #endif
531
532 #if defined(CONFIG_MACH_QQ2440)
533 lp->force |= FORCE_RJ45 | FORCE_FULL;
534 #endif
535 }
536
537 /* Grab the region so we can find another board if autoIRQ fails. */
538 /* WTF is going on here? */
539 if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
540 printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n",
541 DRV_NAME, ioaddr, NETCARD_IO_EXTENT);
542 retval = -EBUSY;
543 goto out1;
544 }
545
546 /* if they give us an odd I/O address, then do ONE write to
547 the address port, to get it back to address zero, where we
548 expect to find the EISA signature word. An IO with a base of 0x3
549 will skip the test for the ADD_PORT. */
550 if (ioaddr & 1) {
551 if (net_debug > 1)
552 printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr);
553 if ((ioaddr & 2) != 2)
554 if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) {
555 printk(KERN_ERR "%s: bad signature 0x%x\n",
556 dev->name, readword(ioaddr & ~3, ADD_PORT));
557 retval = -ENODEV;
558 goto out2;
559 }
560 }
561
562 ioaddr &= ~3;
563 printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n",
564 ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT));
565 writeword(ioaddr, ADD_PORT, PP_ChipID);
566
567 tmp = readword(ioaddr, DATA_PORT);
568 if (tmp != CHIP_EISA_ID_SIG) {
569 printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!="
570 CHIP_EISA_ID_SIG_STR "\n",
571 dev->name, ioaddr, DATA_PORT, tmp);
572 retval = -ENODEV;
573 goto out2;
574 }
575
576 /* Fill in the 'dev' fields. */
577 dev->base_addr = ioaddr;
578
579 /* get the chip type */
580 rev_type = readreg(dev, PRODUCT_ID_ADD);
581 lp->chip_type = rev_type &~ REVISON_BITS;
582 lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
583
584 /* Check the chip type and revision in order to set the correct send command
585 CS8920 revision C and CS8900 revision F can use the faster send. */
586 lp->send_cmd = TX_AFTER_381;
587 if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
588 lp->send_cmd = TX_NOW;
589 if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
590 lp->send_cmd = TX_NOW;
591
592 if (net_debug && version_printed++ == 0)
593 printk(version);
594
595 printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#3lx ",
596 dev->name,
597 lp->chip_type==CS8900?'0':'2',
598 lp->chip_type==CS8920M?"M":"",
599 lp->chip_revision,
600 dev->base_addr);
601
602 reset_chip(dev);
603
604 /* Here we read the current configuration of the chip. If there
605 is no Extended EEPROM then the idea is to not disturb the chip
606 configuration, it should have been correctly setup by automatic
607 EEPROM read on reset. So, if the chip says it read the EEPROM
608 the driver will always do *something* instead of complain that
609 adapter_cnf is 0. */
610
611
612 if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
613 (EEPROM_OK|EEPROM_PRESENT)) {
614 /* Load the MAC. */
615 for (i=0; i < ETH_ALEN/2; i++) {
616 unsigned int Addr;
617 Addr = readreg(dev, PP_IA+i*2);
618 dev->dev_addr[i*2] = Addr & 0xFF;
619 dev->dev_addr[i*2+1] = Addr >> 8;
620 }
621
622 /* Load the Adapter Configuration.
623 Note: Barring any more specific information from some
624 other source (ie EEPROM+Schematics), we would not know
625 how to operate a 10Base2 interface on the AUI port.
626 However, since we do read the status of HCB1 and use
627 settings that always result in calls to control_dc_dc(dev,0)
628 a BNC interface should work if the enable pin
629 (dc/dc converter) is on HCB1. It will be called AUI
630 however. */
631
632 lp->adapter_cnf = 0;
633 i = readreg(dev, PP_LineCTL);
634 /* Preserve the setting of the HCB1 pin. */
635 if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL))
636 lp->adapter_cnf |= A_CNF_DC_DC_POLARITY;
637 /* Save the sqelch bit */
638 if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH)
639 lp->adapter_cnf |= A_CNF_EXTND_10B_2 | A_CNF_LOW_RX_SQUELCH;
640 /* Check if the card is in 10Base-t only mode */
641 if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == 0)
642 lp->adapter_cnf |= A_CNF_10B_T | A_CNF_MEDIA_10B_T;
643 /* Check if the card is in AUI only mode */
644 if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUI_ONLY)
645 lp->adapter_cnf |= A_CNF_AUI | A_CNF_MEDIA_AUI;
646 /* Check if the card is in Auto mode. */
647 if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET)
648 lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T |
649 A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
650
651 if (net_debug > 1)
652 printk(KERN_INFO "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
653 dev->name, i, lp->adapter_cnf);
654
655 /* IRQ. Other chips already probe, see below. */
656 if (lp->chip_type == CS8900)
657 lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK;
658
659 printk( "[Cirrus EEPROM] ");
660 }
661
662 printk("\n");
663
664 /* First check to see if an EEPROM is attached. */
665
666 if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
667 printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
668 else if (get_eeprom_data(dev, START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
669 printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n");
670 } else if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
671 /* Check if the chip was able to read its own configuration starting
672 at 0 in the EEPROM*/
673 if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) !=
674 (EEPROM_OK|EEPROM_PRESENT))
675 printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
676
677 } else {
678 /* This reads an extended EEPROM that is not documented
679 in the CS8900 datasheet. */
680
681 /* get transmission control word but keep the autonegotiation bits */
682 if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
683 /* Store adapter configuration */
684 if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2];
685 /* Store ISA configuration */
686 lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2];
687 dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8;
688
689 /* eeprom_buff has 32-bit ints, so we can't just memcpy it */
690 /* store the initial memory base address */
691 for (i = 0; i < ETH_ALEN/2; i++) {
692 dev->dev_addr[i*2] = eeprom_buff[i];
693 dev->dev_addr[i*2+1] = eeprom_buff[i] >> 8;
694 }
695 if (net_debug > 1)
696 printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n",
697 dev->name, lp->adapter_cnf);
698 }
699
700 /* allow them to force multiple transceivers. If they force multiple, autosense */
701 {
702 int count = 0;
703 if (lp->force & FORCE_RJ45) {lp->adapter_cnf |= A_CNF_10B_T; count++; }
704 if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; }
705 if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_10B_2; count++; }
706 if (count > 1) {lp->adapter_cnf |= A_CNF_MEDIA_AUTO; }
707 else if (lp->force & FORCE_RJ45){lp->adapter_cnf |= A_CNF_MEDIA_10B_T; }
708 else if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_MEDIA_AUI; }
709 else if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_MEDIA_10B_2; }
710 }
711
712 if (net_debug > 1)
713 printk(KERN_DEBUG "%s: after force 0x%x, adapter_cnf=0x%x\n",
714 dev->name, lp->force, lp->adapter_cnf);
715
716 /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
717
718 /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */
719
720 /* FIXME: we don't set the Ethernet address on the command line. Use
721 ifconfig IFACE hw ether AABBCCDDEEFF */
722
723 printk(KERN_INFO "cs89x0 media %s%s%s",
724 (lp->adapter_cnf & A_CNF_10B_T)?"RJ-45,":"",
725 (lp->adapter_cnf & A_CNF_AUI)?"AUI,":"",
726 (lp->adapter_cnf & A_CNF_10B_2)?"BNC,":"");
727
728 lp->irq_map = 0xffff;
729
730 /* If this is a CS8900 then no pnp soft */
731 if (lp->chip_type != CS8900 &&
732 /* Check if the ISA IRQ has been set */
733 (i = readreg(dev, PP_CS8920_ISAINT) & 0xff,
734 (i != 0 && i < CS8920_NO_INTS))) {
735 if (!dev->irq)
736 dev->irq = i;
737 } else {
738 i = lp->isa_config & INT_NO_MASK;
739 if (lp->chip_type == CS8900) {
740 #ifdef CONFIG_CS89x0_NONISA_IRQ
741 i = cs8900_irq_map[0];
742 #else
743 /* Translate the IRQ using the IRQ mapping table. */
744 if (i >= ARRAY_SIZE(cs8900_irq_map))
745 printk("\ncs89x0: invalid ISA interrupt number %d\n", i);
746 else
747 i = cs8900_irq_map[i];
748
749 lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */
750 } else {
751 int irq_map_buff[IRQ_MAP_LEN/2];
752
753 if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA,
754 IRQ_MAP_LEN/2,
755 irq_map_buff) >= 0) {
756 if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
757 lp->irq_map = (irq_map_buff[0]>>8) | (irq_map_buff[1] << 8);
758 }
759 #endif
760 }
761 if (!dev->irq)
762 dev->irq = i;
763 }
764
765 printk(" IRQ %d", dev->irq);
766
767 #if ALLOW_DMA
768 if (lp->use_dma) {
769 get_dma_channel(dev);
770 printk(", DMA %d", dev->dma);
771 }
772 else
773 #endif
774 {
775 printk(", programmed I/O");
776 }
777
778 /* print the ethernet address. */
779 printk(", MAC %pM", dev->dev_addr);
780
781 dev->netdev_ops = &net_ops;
782 dev->watchdog_timeo = HZ;
783
784 printk("\n");
785 if (net_debug)
786 printk("cs89x0_probe1() successful\n");
787
788 retval = register_netdev(dev);
789 if (retval)
790 goto out3;
791 return 0;
792 out3:
793 writeword(dev->base_addr, ADD_PORT, PP_ChipID);
794 out2:
795 release_region(ioaddr & ~3, NETCARD_IO_EXTENT);
796 out1:
797 return retval;
798 }
799
800
801 /*********************************
802 * This page contains DMA routines
803 **********************************/
804
805 #if ALLOW_DMA
806
807 #define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17)
808
809 static void
810 get_dma_channel(struct net_device *dev)
811 {
812 struct net_local *lp = netdev_priv(dev);
813
814 if (lp->dma) {
815 dev->dma = lp->dma;
816 lp->isa_config |= ISA_RxDMA;
817 } else {
818 if ((lp->isa_config & ANY_ISA_DMA) == 0)
819 return;
820 dev->dma = lp->isa_config & DMA_NO_MASK;
821 if (lp->chip_type == CS8900)
822 dev->dma += 5;
823 if (dev->dma < 5 || dev->dma > 7) {
824 lp->isa_config &= ~ANY_ISA_DMA;
825 return;
826 }
827 }
828 }
829
830 static void
831 write_dma(struct net_device *dev, int chip_type, int dma)
832 {
833 struct net_local *lp = netdev_priv(dev);
834 if ((lp->isa_config & ANY_ISA_DMA) == 0)
835 return;
836 if (chip_type == CS8900) {
837 writereg(dev, PP_CS8900_ISADMA, dma-5);
838 } else {
839 writereg(dev, PP_CS8920_ISADMA, dma);
840 }
841 }
842
843 static void
844 set_dma_cfg(struct net_device *dev)
845 {
846 struct net_local *lp = netdev_priv(dev);
847
848 if (lp->use_dma) {
849 if ((lp->isa_config & ANY_ISA_DMA) == 0) {
850 if (net_debug > 3)
851 printk("set_dma_cfg(): no DMA\n");
852 return;
853 }
854 if (lp->isa_config & ISA_RxDMA) {
855 lp->curr_rx_cfg |= RX_DMA_ONLY;
856 if (net_debug > 3)
857 printk("set_dma_cfg(): RX_DMA_ONLY\n");
858 } else {
859 lp->curr_rx_cfg |= AUTO_RX_DMA; /* not that we support it... */
860 if (net_debug > 3)
861 printk("set_dma_cfg(): AUTO_RX_DMA\n");
862 }
863 }
864 }
865
866 static int
867 dma_bufcfg(struct net_device *dev)
868 {
869 struct net_local *lp = netdev_priv(dev);
870 if (lp->use_dma)
871 return (lp->isa_config & ANY_ISA_DMA)? RX_DMA_ENBL : 0;
872 else
873 return 0;
874 }
875
876 static int
877 dma_busctl(struct net_device *dev)
878 {
879 int retval = 0;
880 struct net_local *lp = netdev_priv(dev);
881 if (lp->use_dma) {
882 if (lp->isa_config & ANY_ISA_DMA)
883 retval |= RESET_RX_DMA; /* Reset the DMA pointer */
884 if (lp->isa_config & DMA_BURST)
885 retval |= DMA_BURST_MODE; /* Does ISA config specify DMA burst ? */
886 if (lp->dmasize == 64)
887 retval |= RX_DMA_SIZE_64K; /* did they ask for 64K? */
888 retval |= MEMORY_ON; /* we need memory enabled to use DMA. */
889 }
890 return retval;
891 }
892
893 static void
894 dma_rx(struct net_device *dev)
895 {
896 struct net_local *lp = netdev_priv(dev);
897 struct sk_buff *skb;
898 int status, length;
899 unsigned char *bp = lp->rx_dma_ptr;
900
901 status = bp[0] + (bp[1]<<8);
902 length = bp[2] + (bp[3]<<8);
903 bp += 4;
904 if (net_debug > 5) {
905 printk( "%s: receiving DMA packet at %lx, status %x, length %x\n",
906 dev->name, (unsigned long)bp, status, length);
907 }
908 if ((status & RX_OK) == 0) {
909 count_rx_errors(status, dev);
910 goto skip_this_frame;
911 }
912
913 /* Malloc up new buffer. */
914 skb = dev_alloc_skb(length + 2);
915 if (skb == NULL) {
916 if (net_debug) /* I don't think we want to do this to a stressed system */
917 printk("%s: Memory squeeze, dropping packet.\n", dev->name);
918 dev->stats.rx_dropped++;
919
920 /* AKPM: advance bp to the next frame */
921 skip_this_frame:
922 bp += (length + 3) & ~3;
923 if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
924 lp->rx_dma_ptr = bp;
925 return;
926 }
927 skb_reserve(skb, 2); /* longword align L3 header */
928
929 if (bp + length > lp->end_dma_buff) {
930 int semi_cnt = lp->end_dma_buff - bp;
931 memcpy(skb_put(skb,semi_cnt), bp, semi_cnt);
932 memcpy(skb_put(skb,length - semi_cnt), lp->dma_buff,
933 length - semi_cnt);
934 } else {
935 memcpy(skb_put(skb,length), bp, length);
936 }
937 bp += (length + 3) & ~3;
938 if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
939 lp->rx_dma_ptr = bp;
940
941 if (net_debug > 3) {
942 printk( "%s: received %d byte DMA packet of type %x\n",
943 dev->name, length,
944 (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
945 }
946 skb->protocol=eth_type_trans(skb,dev);
947 netif_rx(skb);
948 dev->stats.rx_packets++;
949 dev->stats.rx_bytes += length;
950 }
951
952 #endif /* ALLOW_DMA */
953
954 static void __init reset_chip(struct net_device *dev)
955 {
956 #if !defined(CONFIG_MACH_MX31ADS)
957 #if !defined(CS89x0_NONISA_IRQ)
958 struct net_local *lp = netdev_priv(dev);
959 int ioaddr = dev->base_addr;
960 #endif /* CS89x0_NONISA_IRQ */
961 int reset_start_time;
962
963 writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
964
965 /* wait 30 ms */
966 msleep(30);
967
968 #if !defined(CS89x0_NONISA_IRQ)
969 if (lp->chip_type != CS8900) {
970 /* Hardware problem requires PNP registers to be reconfigured after a reset */
971 writeword(ioaddr, ADD_PORT, PP_CS8920_ISAINT);
972 outb(dev->irq, ioaddr + DATA_PORT);
973 outb(0, ioaddr + DATA_PORT + 1);
974
975 writeword(ioaddr, ADD_PORT, PP_CS8920_ISAMemB);
976 outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT);
977 outb((dev->mem_start >> 8) & 0xff, ioaddr + DATA_PORT + 1);
978 }
979 #endif /* CS89x0_NONISA_IRQ */
980
981 /* Wait until the chip is reset */
982 reset_start_time = jiffies;
983 while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
984 ;
985 #endif /* !CONFIG_MACH_MX31ADS */
986 }
987
988
989 static void
990 control_dc_dc(struct net_device *dev, int on_not_off)
991 {
992 struct net_local *lp = netdev_priv(dev);
993 unsigned int selfcontrol;
994 int timenow = jiffies;
995 /* control the DC to DC convertor in the SelfControl register.
996 Note: This is hooked up to a general purpose pin, might not
997 always be a DC to DC convertor. */
998
999 selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
1000 if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off)
1001 selfcontrol |= HCB1;
1002 else
1003 selfcontrol &= ~HCB1;
1004 writereg(dev, PP_SelfCTL, selfcontrol);
1005
1006 /* Wait for the DC/DC converter to power up - 500ms */
1007 while (jiffies - timenow < HZ)
1008 ;
1009 }
1010
1011 #define DETECTED_NONE 0
1012 #define DETECTED_RJ45H 1
1013 #define DETECTED_RJ45F 2
1014 #define DETECTED_AUI 3
1015 #define DETECTED_BNC 4
1016
1017 static int
1018 detect_tp(struct net_device *dev)
1019 {
1020 struct net_local *lp = netdev_priv(dev);
1021 int timenow = jiffies;
1022 int fdx;
1023
1024 if (net_debug > 1) printk("%s: Attempting TP\n", dev->name);
1025
1026 /* If connected to another full duplex capable 10-Base-T card the link pulses
1027 seem to be lost when the auto detect bit in the LineCTL is set.
1028 To overcome this the auto detect bit will be cleared whilst testing the
1029 10-Base-T interface. This would not be necessary for the sparrow chip but
1030 is simpler to do it anyway. */
1031 writereg(dev, PP_LineCTL, lp->linectl &~ AUI_ONLY);
1032 control_dc_dc(dev, 0);
1033
1034 /* Delay for the hardware to work out if the TP cable is present - 150ms */
1035 for (timenow = jiffies; jiffies - timenow < 15; )
1036 ;
1037 if ((readreg(dev, PP_LineST) & LINK_OK) == 0)
1038 return DETECTED_NONE;
1039
1040 if (lp->chip_type == CS8900) {
1041 switch (lp->force & 0xf0) {
1042 #if 0
1043 case FORCE_AUTO:
1044 printk("%s: cs8900 doesn't autonegotiate\n",dev->name);
1045 return DETECTED_NONE;
1046 #endif
1047 /* CS8900 doesn't support AUTO, change to HALF*/
1048 case FORCE_AUTO:
1049 lp->force &= ~FORCE_AUTO;
1050 lp->force |= FORCE_HALF;
1051 break;
1052 case FORCE_HALF:
1053 break;
1054 case FORCE_FULL:
1055 writereg(dev, PP_TestCTL, readreg(dev, PP_TestCTL) | FDX_8900);
1056 break;
1057 }
1058 fdx = readreg(dev, PP_TestCTL) & FDX_8900;
1059 } else {
1060 switch (lp->force & 0xf0) {
1061 case FORCE_AUTO:
1062 lp->auto_neg_cnf = AUTO_NEG_ENABLE;
1063 break;
1064 case FORCE_HALF:
1065 lp->auto_neg_cnf = 0;
1066 break;
1067 case FORCE_FULL:
1068 lp->auto_neg_cnf = RE_NEG_NOW | ALLOW_FDX;
1069 break;
1070 }
1071
1072 writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK);
1073
1074 if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
1075 printk(KERN_INFO "%s: negotiating duplex...\n",dev->name);
1076 while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) {
1077 if (jiffies - timenow > 4000) {
1078 printk(KERN_ERR "**** Full / half duplex auto-negotiation timed out ****\n");
1079 break;
1080 }
1081 }
1082 }
1083 fdx = readreg(dev, PP_AutoNegST) & FDX_ACTIVE;
1084 }
1085 if (fdx)
1086 return DETECTED_RJ45F;
1087 else
1088 return DETECTED_RJ45H;
1089 }
1090
1091 /* send a test packet - return true if carrier bits are ok */
1092 static int
1093 send_test_pkt(struct net_device *dev)
1094 {
1095 char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
1096 0, 46, /* A 46 in network order */
1097 0, 0, /* DSAP=0 & SSAP=0 fields */
1098 0xf3, 0 /* Control (Test Req + P bit set) */ };
1099 long timenow = jiffies;
1100
1101 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON);
1102
1103 memcpy(test_packet, dev->dev_addr, ETH_ALEN);
1104 memcpy(test_packet+ETH_ALEN, dev->dev_addr, ETH_ALEN);
1105
1106 writeword(dev->base_addr, TX_CMD_PORT, TX_AFTER_ALL);
1107 writeword(dev->base_addr, TX_LEN_PORT, ETH_ZLEN);
1108
1109 /* Test to see if the chip has allocated memory for the packet */
1110 while (jiffies - timenow < 5)
1111 if (readreg(dev, PP_BusST) & READY_FOR_TX_NOW)
1112 break;
1113 if (jiffies - timenow >= 5)
1114 return 0; /* this shouldn't happen */
1115
1116 /* Write the contents of the packet */
1117 writewords(dev->base_addr, TX_FRAME_PORT,test_packet,(ETH_ZLEN+1) >>1);
1118
1119 if (net_debug > 1) printk("Sending test packet ");
1120 /* wait a couple of jiffies for packet to be received */
1121 for (timenow = jiffies; jiffies - timenow < 3; )
1122 ;
1123 if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
1124 if (net_debug > 1) printk("succeeded\n");
1125 return 1;
1126 }
1127 if (net_debug > 1) printk("failed\n");
1128 return 0;
1129 }
1130
1131
1132 static int
1133 detect_aui(struct net_device *dev)
1134 {
1135 struct net_local *lp = netdev_priv(dev);
1136
1137 if (net_debug > 1) printk("%s: Attempting AUI\n", dev->name);
1138 control_dc_dc(dev, 0);
1139
1140 writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
1141
1142 if (send_test_pkt(dev))
1143 return DETECTED_AUI;
1144 else
1145 return DETECTED_NONE;
1146 }
1147
1148 static int
1149 detect_bnc(struct net_device *dev)
1150 {
1151 struct net_local *lp = netdev_priv(dev);
1152
1153 if (net_debug > 1) printk("%s: Attempting BNC\n", dev->name);
1154 control_dc_dc(dev, 1);
1155
1156 writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
1157
1158 if (send_test_pkt(dev))
1159 return DETECTED_BNC;
1160 else
1161 return DETECTED_NONE;
1162 }
1163
1164
1165 static void
1166 write_irq(struct net_device *dev, int chip_type, int irq)
1167 {
1168 int i;
1169
1170 if (chip_type == CS8900) {
1171 /* Search the mapping table for the corresponding IRQ pin. */
1172 for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
1173 if (cs8900_irq_map[i] == irq)
1174 break;
1175 /* Not found */
1176 if (i == ARRAY_SIZE(cs8900_irq_map))
1177 i = 3;
1178 writereg(dev, PP_CS8900_ISAINT, i);
1179 } else {
1180 writereg(dev, PP_CS8920_ISAINT, irq);
1181 }
1182 }
1183
1184 /* Open/initialize the board. This is called (in the current kernel)
1185 sometime after booting when the 'ifconfig' program is run.
1186
1187 This routine should set everything up anew at each open, even
1188 registers that "should" only need to be set once at boot, so that
1189 there is non-reboot way to recover if something goes wrong.
1190 */
1191
1192 /* AKPM: do we need to do any locking here? */
1193
1194 static int
1195 net_open(struct net_device *dev)
1196 {
1197 struct net_local *lp = netdev_priv(dev);
1198 int result = 0;
1199 int i;
1200 int ret;
1201
1202 if (dev->irq < 2) {
1203 /* Allow interrupts to be generated by the chip */
1204 /* Cirrus' release had this: */
1205 #if 0
1206 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
1207 #endif
1208 /* And 2.3.47 had this: */
1209 writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
1210
1211 for (i = 2; i < CS8920_NO_INTS; i++) {
1212 if ((1 << i) & lp->irq_map) {
1213 if (request_irq(i, net_interrupt, 0, dev->name, dev) == 0) {
1214 dev->irq = i;
1215 write_irq(dev, lp->chip_type, i);
1216 /* writereg(dev, PP_BufCFG, GENERATE_SW_INTERRUPT); */
1217 break;
1218 }
1219 }
1220 }
1221
1222 if (i >= CS8920_NO_INTS) {
1223 writereg(dev, PP_BusCTL, 0); /* disable interrupts. */
1224 printk(KERN_ERR "cs89x0: can't get an interrupt\n");
1225 ret = -EAGAIN;
1226 goto bad_out;
1227 }
1228 }
1229 else
1230 {
1231 #ifndef CONFIG_CS89x0_NONISA_IRQ
1232 if (((1 << dev->irq) & lp->irq_map) == 0) {
1233 printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
1234 dev->name, dev->irq, lp->irq_map);
1235 ret = -EAGAIN;
1236 goto bad_out;
1237 }
1238 #endif
1239 /* FIXME: Cirrus' release had this: */
1240 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
1241 /* And 2.3.47 had this: */
1242 #if 0
1243 writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
1244 #endif
1245 write_irq(dev, lp->chip_type, dev->irq);
1246 ret = request_irq(dev->irq, net_interrupt, 0, dev->name, dev);
1247 if (ret) {
1248 printk(KERN_ERR "cs89x0: request_irq(%d) failed\n", dev->irq);
1249 goto bad_out;
1250 }
1251 }
1252
1253 #if ALLOW_DMA
1254 if (lp->use_dma) {
1255 if (lp->isa_config & ANY_ISA_DMA) {
1256 unsigned long flags;
1257 lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL,
1258 get_order(lp->dmasize * 1024));
1259
1260 if (!lp->dma_buff) {
1261 printk(KERN_ERR "%s: cannot get %dK memory for DMA\n", dev->name, lp->dmasize);
1262 goto release_irq;
1263 }
1264 if (net_debug > 1) {
1265 printk( "%s: dma %lx %lx\n",
1266 dev->name,
1267 (unsigned long)lp->dma_buff,
1268 (unsigned long)isa_virt_to_bus(lp->dma_buff));
1269 }
1270 if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS ||
1271 !dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) {
1272 printk(KERN_ERR "%s: not usable as DMA buffer\n", dev->name);
1273 goto release_irq;
1274 }
1275 memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
1276 if (request_dma(dev->dma, dev->name)) {
1277 printk(KERN_ERR "%s: cannot get dma channel %d\n", dev->name, dev->dma);
1278 goto release_irq;
1279 }
1280 write_dma(dev, lp->chip_type, dev->dma);
1281 lp->rx_dma_ptr = lp->dma_buff;
1282 lp->end_dma_buff = lp->dma_buff + lp->dmasize*1024;
1283 spin_lock_irqsave(&lp->lock, flags);
1284 disable_dma(dev->dma);
1285 clear_dma_ff(dev->dma);
1286 set_dma_mode(dev->dma, DMA_RX_MODE); /* auto_init as well */
1287 set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff));
1288 set_dma_count(dev->dma, lp->dmasize*1024);
1289 enable_dma(dev->dma);
1290 spin_unlock_irqrestore(&lp->lock, flags);
1291 }
1292 }
1293 #endif /* ALLOW_DMA */
1294
1295 /* set the Ethernet address */
1296 for (i=0; i < ETH_ALEN/2; i++)
1297 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
1298
1299 /* while we're testing the interface, leave interrupts disabled */
1300 writereg(dev, PP_BusCTL, MEMORY_ON);
1301
1302 /* Set the LineCTL quintuplet based on adapter configuration read from EEPROM */
1303 if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
1304 lp->linectl = LOW_RX_SQUELCH;
1305 else
1306 lp->linectl = 0;
1307
1308 /* check to make sure that they have the "right" hardware available */
1309 switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
1310 case A_CNF_MEDIA_10B_T: result = lp->adapter_cnf & A_CNF_10B_T; break;
1311 case A_CNF_MEDIA_AUI: result = lp->adapter_cnf & A_CNF_AUI; break;
1312 case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
1313 default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
1314 }
1315 if (!result) {
1316 printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
1317 release_dma:
1318 #if ALLOW_DMA
1319 free_dma(dev->dma);
1320 release_irq:
1321 release_dma_buff(lp);
1322 #endif
1323 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
1324 free_irq(dev->irq, dev);
1325 ret = -EAGAIN;
1326 goto bad_out;
1327 }
1328
1329 /* set the hardware to the configured choice */
1330 switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
1331 case A_CNF_MEDIA_10B_T:
1332 result = detect_tp(dev);
1333 if (result==DETECTED_NONE) {
1334 printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name);
1335 if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
1336 result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */
1337 }
1338 break;
1339 case A_CNF_MEDIA_AUI:
1340 result = detect_aui(dev);
1341 if (result==DETECTED_NONE) {
1342 printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name);
1343 if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
1344 result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */
1345 }
1346 break;
1347 case A_CNF_MEDIA_10B_2:
1348 result = detect_bnc(dev);
1349 if (result==DETECTED_NONE) {
1350 printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name);
1351 if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
1352 result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */
1353 }
1354 break;
1355 case A_CNF_MEDIA_AUTO:
1356 writereg(dev, PP_LineCTL, lp->linectl | AUTO_AUI_10BASET);
1357 if (lp->adapter_cnf & A_CNF_10B_T)
1358 if ((result = detect_tp(dev)) != DETECTED_NONE)
1359 break;
1360 if (lp->adapter_cnf & A_CNF_AUI)
1361 if ((result = detect_aui(dev)) != DETECTED_NONE)
1362 break;
1363 if (lp->adapter_cnf & A_CNF_10B_2)
1364 if ((result = detect_bnc(dev)) != DETECTED_NONE)
1365 break;
1366 printk(KERN_ERR "%s: no media detected\n", dev->name);
1367 goto release_dma;
1368 }
1369 switch(result) {
1370 case DETECTED_NONE:
1371 printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
1372 goto release_dma;
1373 case DETECTED_RJ45H:
1374 printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
1375 break;
1376 case DETECTED_RJ45F:
1377 printk(KERN_INFO "%s: using full-duplex 10Base-T (RJ-45)\n", dev->name);
1378 break;
1379 case DETECTED_AUI:
1380 printk(KERN_INFO "%s: using 10Base-5 (AUI)\n", dev->name);
1381 break;
1382 case DETECTED_BNC:
1383 printk(KERN_INFO "%s: using 10Base-2 (BNC)\n", dev->name);
1384 break;
1385 }
1386
1387 /* Turn on both receive and transmit operations */
1388 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
1389
1390 /* Receive only error free packets addressed to this card */
1391 lp->rx_mode = 0;
1392 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
1393
1394 lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
1395
1396 if (lp->isa_config & STREAM_TRANSFER)
1397 lp->curr_rx_cfg |= RX_STREAM_ENBL;
1398 #if ALLOW_DMA
1399 set_dma_cfg(dev);
1400 #endif
1401 writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
1402
1403 writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
1404 TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
1405
1406 writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
1407 #if ALLOW_DMA
1408 dma_bufcfg(dev) |
1409 #endif
1410 TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
1411
1412 /* now that we've got our act together, enable everything */
1413 writereg(dev, PP_BusCTL, ENABLE_IRQ
1414 | (dev->mem_start?MEMORY_ON : 0) /* turn memory on */
1415 #if ALLOW_DMA
1416 | dma_busctl(dev)
1417 #endif
1418 );
1419 netif_start_queue(dev);
1420 if (net_debug > 1)
1421 printk("cs89x0: net_open() succeeded\n");
1422 return 0;
1423 bad_out:
1424 return ret;
1425 }
1426
1427 static void net_timeout(struct net_device *dev)
1428 {
1429 /* If we get here, some higher level has decided we are broken.
1430 There should really be a "kick me" function call instead. */
1431 if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
1432 tx_done(dev) ? "IRQ conflict ?" : "network cable problem");
1433 /* Try to restart the adaptor. */
1434 netif_wake_queue(dev);
1435 }
1436
1437 static netdev_tx_t net_send_packet(struct sk_buff *skb,struct net_device *dev)
1438 {
1439 struct net_local *lp = netdev_priv(dev);
1440 unsigned long flags;
1441
1442 if (net_debug > 3) {
1443 printk("%s: sent %d byte packet of type %x\n",
1444 dev->name, skb->len,
1445 (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
1446 }
1447
1448 /* keep the upload from being interrupted, since we
1449 ask the chip to start transmitting before the
1450 whole packet has been completely uploaded. */
1451
1452 spin_lock_irqsave(&lp->lock, flags);
1453 netif_stop_queue(dev);
1454
1455 /* initiate a transmit sequence */
1456 writeword(dev->base_addr, TX_CMD_PORT, lp->send_cmd);
1457 writeword(dev->base_addr, TX_LEN_PORT, skb->len);
1458
1459 /* Test to see if the chip has allocated memory for the packet */
1460 if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
1461 /*
1462 * Gasp! It hasn't. But that shouldn't happen since
1463 * we're waiting for TxOk, so return 1 and requeue this packet.
1464 */
1465
1466 spin_unlock_irqrestore(&lp->lock, flags);
1467 if (net_debug) printk("cs89x0: Tx buffer not free!\n");
1468 return NETDEV_TX_BUSY;
1469 }
1470 /* Write the contents of the packet */
1471 writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
1472 spin_unlock_irqrestore(&lp->lock, flags);
1473 dev->stats.tx_bytes += skb->len;
1474 dev_kfree_skb (skb);
1475
1476 /*
1477 * We DO NOT call netif_wake_queue() here.
1478 * We also DO NOT call netif_start_queue().
1479 *
1480 * Either of these would cause another bottom half run through
1481 * net_send_packet() before this packet has fully gone out. That causes
1482 * us to hit the "Gasp!" above and the send is rescheduled. it runs like
1483 * a dog. We just return and wait for the Tx completion interrupt handler
1484 * to restart the netdevice layer
1485 */
1486
1487 return NETDEV_TX_OK;
1488 }
1489
1490 /* The typical workload of the driver:
1491 Handle the network interface interrupts. */
1492
1493 static irqreturn_t net_interrupt(int irq, void *dev_id)
1494 {
1495 struct net_device *dev = dev_id;
1496 struct net_local *lp;
1497 int ioaddr, status;
1498 int handled = 0;
1499
1500 ioaddr = dev->base_addr;
1501 lp = netdev_priv(dev);
1502
1503 /* we MUST read all the events out of the ISQ, otherwise we'll never
1504 get interrupted again. As a consequence, we can't have any limit
1505 on the number of times we loop in the interrupt handler. The
1506 hardware guarantees that eventually we'll run out of events. Of
1507 course, if you're on a slow machine, and packets are arriving
1508 faster than you can read them off, you're screwed. Hasta la
1509 vista, baby! */
1510 while ((status = readword(dev->base_addr, ISQ_PORT))) {
1511 if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
1512 handled = 1;
1513 switch(status & ISQ_EVENT_MASK) {
1514 case ISQ_RECEIVER_EVENT:
1515 /* Got a packet(s). */
1516 net_rx(dev);
1517 break;
1518 case ISQ_TRANSMITTER_EVENT:
1519 dev->stats.tx_packets++;
1520 netif_wake_queue(dev); /* Inform upper layers. */
1521 if ((status & ( TX_OK |
1522 TX_LOST_CRS |
1523 TX_SQE_ERROR |
1524 TX_LATE_COL |
1525 TX_16_COL)) != TX_OK) {
1526 if ((status & TX_OK) == 0)
1527 dev->stats.tx_errors++;
1528 if (status & TX_LOST_CRS)
1529 dev->stats.tx_carrier_errors++;
1530 if (status & TX_SQE_ERROR)
1531 dev->stats.tx_heartbeat_errors++;
1532 if (status & TX_LATE_COL)
1533 dev->stats.tx_window_errors++;
1534 if (status & TX_16_COL)
1535 dev->stats.tx_aborted_errors++;
1536 }
1537 break;
1538 case ISQ_BUFFER_EVENT:
1539 if (status & READY_FOR_TX) {
1540 /* we tried to transmit a packet earlier,
1541 but inexplicably ran out of buffers.
1542 That shouldn't happen since we only ever
1543 load one packet. Shrug. Do the right
1544 thing anyway. */
1545 netif_wake_queue(dev); /* Inform upper layers. */
1546 }
1547 if (status & TX_UNDERRUN) {
1548 if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
1549 lp->send_underrun++;
1550 if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
1551 else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
1552 /* transmit cycle is done, although
1553 frame wasn't transmitted - this
1554 avoids having to wait for the upper
1555 layers to timeout on us, in the
1556 event of a tx underrun */
1557 netif_wake_queue(dev); /* Inform upper layers. */
1558 }
1559 #if ALLOW_DMA
1560 if (lp->use_dma && (status & RX_DMA)) {
1561 int count = readreg(dev, PP_DmaFrameCnt);
1562 while(count) {
1563 if (net_debug > 5)
1564 printk("%s: receiving %d DMA frames\n", dev->name, count);
1565 if (net_debug > 2 && count >1)
1566 printk("%s: receiving %d DMA frames\n", dev->name, count);
1567 dma_rx(dev);
1568 if (--count == 0)
1569 count = readreg(dev, PP_DmaFrameCnt);
1570 if (net_debug > 2 && count > 0)
1571 printk("%s: continuing with %d DMA frames\n", dev->name, count);
1572 }
1573 }
1574 #endif
1575 break;
1576 case ISQ_RX_MISS_EVENT:
1577 dev->stats.rx_missed_errors += (status >> 6);
1578 break;
1579 case ISQ_TX_COL_EVENT:
1580 dev->stats.collisions += (status >> 6);
1581 break;
1582 }
1583 }
1584 return IRQ_RETVAL(handled);
1585 }
1586
1587 static void
1588 count_rx_errors(int status, struct net_device *dev)
1589 {
1590 dev->stats.rx_errors++;
1591 if (status & RX_RUNT)
1592 dev->stats.rx_length_errors++;
1593 if (status & RX_EXTRA_DATA)
1594 dev->stats.rx_length_errors++;
1595 if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA|RX_RUNT)))
1596 /* per str 172 */
1597 dev->stats.rx_crc_errors++;
1598 if (status & RX_DRIBBLE)
1599 dev->stats.rx_frame_errors++;
1600 }
1601
1602 /* We have a good packet(s), get it/them out of the buffers. */
1603 static void
1604 net_rx(struct net_device *dev)
1605 {
1606 struct sk_buff *skb;
1607 int status, length;
1608
1609 int ioaddr = dev->base_addr;
1610 status = readword(ioaddr, RX_FRAME_PORT);
1611 length = readword(ioaddr, RX_FRAME_PORT);
1612
1613 if ((status & RX_OK) == 0) {
1614 count_rx_errors(status, dev);
1615 return;
1616 }
1617
1618 /* Malloc up new buffer. */
1619 skb = dev_alloc_skb(length + 2);
1620 if (skb == NULL) {
1621 #if 0 /* Again, this seems a cruel thing to do */
1622 printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);
1623 #endif
1624 dev->stats.rx_dropped++;
1625 return;
1626 }
1627 skb_reserve(skb, 2); /* longword align L3 header */
1628
1629 readwords(ioaddr, RX_FRAME_PORT, skb_put(skb, length), length >> 1);
1630 if (length & 1)
1631 skb->data[length-1] = readword(ioaddr, RX_FRAME_PORT);
1632
1633 if (net_debug > 3) {
1634 printk( "%s: received %d byte packet of type %x\n",
1635 dev->name, length,
1636 (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
1637 }
1638
1639 skb->protocol=eth_type_trans(skb,dev);
1640 netif_rx(skb);
1641 dev->stats.rx_packets++;
1642 dev->stats.rx_bytes += length;
1643 }
1644
1645 #if ALLOW_DMA
1646 static void release_dma_buff(struct net_local *lp)
1647 {
1648 if (lp->dma_buff) {
1649 free_pages((unsigned long)(lp->dma_buff), get_order(lp->dmasize * 1024));
1650 lp->dma_buff = NULL;
1651 }
1652 }
1653 #endif
1654
1655 /* The inverse routine to net_open(). */
1656 static int
1657 net_close(struct net_device *dev)
1658 {
1659 #if ALLOW_DMA
1660 struct net_local *lp = netdev_priv(dev);
1661 #endif
1662
1663 netif_stop_queue(dev);
1664
1665 writereg(dev, PP_RxCFG, 0);
1666 writereg(dev, PP_TxCFG, 0);
1667 writereg(dev, PP_BufCFG, 0);
1668 writereg(dev, PP_BusCTL, 0);
1669
1670 free_irq(dev->irq, dev);
1671
1672 #if ALLOW_DMA
1673 if (lp->use_dma && lp->dma) {
1674 free_dma(dev->dma);
1675 release_dma_buff(lp);
1676 }
1677 #endif
1678
1679 /* Update the statistics here. */
1680 return 0;
1681 }
1682
1683 /* Get the current statistics. This may be called with the card open or
1684 closed. */
1685 static struct net_device_stats *
1686 net_get_stats(struct net_device *dev)
1687 {
1688 struct net_local *lp = netdev_priv(dev);
1689 unsigned long flags;
1690
1691 spin_lock_irqsave(&lp->lock, flags);
1692 /* Update the statistics from the device registers. */
1693 dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
1694 dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
1695 spin_unlock_irqrestore(&lp->lock, flags);
1696
1697 return &dev->stats;
1698 }
1699
1700 static void set_multicast_list(struct net_device *dev)
1701 {
1702 struct net_local *lp = netdev_priv(dev);
1703 unsigned long flags;
1704
1705 spin_lock_irqsave(&lp->lock, flags);
1706 if(dev->flags&IFF_PROMISC)
1707 {
1708 lp->rx_mode = RX_ALL_ACCEPT;
1709 }
1710 else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
1711 {
1712 /* The multicast-accept list is initialized to accept-all, and we
1713 rely on higher-level filtering for now. */
1714 lp->rx_mode = RX_MULTCAST_ACCEPT;
1715 }
1716 else
1717 lp->rx_mode = 0;
1718
1719 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
1720
1721 /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
1722 writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
1723 (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
1724 spin_unlock_irqrestore(&lp->lock, flags);
1725 }
1726
1727
1728 static int set_mac_address(struct net_device *dev, void *p)
1729 {
1730 int i;
1731 struct sockaddr *addr = p;
1732
1733 if (netif_running(dev))
1734 return -EBUSY;
1735
1736 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1737
1738 if (net_debug)
1739 printk("%s: Setting MAC address to %pM.\n",
1740 dev->name, dev->dev_addr);
1741
1742 /* set the Ethernet address */
1743 for (i=0; i < ETH_ALEN/2; i++)
1744 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
1745
1746 return 0;
1747 }
1748
1749 #ifdef MODULE
1750
1751 static struct net_device *dev_cs89x0;
1752
1753 /*
1754 * Support the 'debug' module parm even if we're compiled for non-debug to
1755 * avoid breaking someone's startup scripts
1756 */
1757
1758 static int io;
1759 static int irq;
1760 static int debug;
1761 static char media[8];
1762 static int duplex=-1;
1763
1764 static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */
1765 static int dma;
1766 static int dmasize=16; /* or 64 */
1767
1768 module_param(io, int, 0);
1769 module_param(irq, int, 0);
1770 module_param(debug, int, 0);
1771 module_param_string(media, media, sizeof(media), 0);
1772 module_param(duplex, int, 0);
1773 module_param(dma , int, 0);
1774 module_param(dmasize , int, 0);
1775 module_param(use_dma , int, 0);
1776 MODULE_PARM_DESC(io, "cs89x0 I/O base address");
1777 MODULE_PARM_DESC(irq, "cs89x0 IRQ number");
1778 #if DEBUGGING
1779 MODULE_PARM_DESC(debug, "cs89x0 debug level (0-6)");
1780 #else
1781 MODULE_PARM_DESC(debug, "(ignored)");
1782 #endif
1783 MODULE_PARM_DESC(media, "Set cs89x0 adapter(s) media type(s) (rj45,bnc,aui)");
1784 /* No other value than -1 for duplex seems to be currently interpreted */
1785 MODULE_PARM_DESC(duplex, "(ignored)");
1786 #if ALLOW_DMA
1787 MODULE_PARM_DESC(dma , "cs89x0 ISA DMA channel; ignored if use_dma=0");
1788 MODULE_PARM_DESC(dmasize , "cs89x0 DMA size in kB (16,64); ignored if use_dma=0");
1789 MODULE_PARM_DESC(use_dma , "cs89x0 using DMA (0-1)");
1790 #else
1791 MODULE_PARM_DESC(dma , "(ignored)");
1792 MODULE_PARM_DESC(dmasize , "(ignored)");
1793 MODULE_PARM_DESC(use_dma , "(ignored)");
1794 #endif
1795
1796 MODULE_AUTHOR("Mike Cruse, Russwll Nelson <nelson@crynwr.com>, Andrew Morton");
1797 MODULE_LICENSE("GPL");
1798
1799
1800 /*
1801 * media=t - specify media type
1802 or media=2
1803 or media=aui
1804 or medai=auto
1805 * duplex=0 - specify forced half/full/autonegotiate duplex
1806 * debug=# - debug level
1807
1808
1809 * Default Chip Configuration:
1810 * DMA Burst = enabled
1811 * IOCHRDY Enabled = enabled
1812 * UseSA = enabled
1813 * CS8900 defaults to half-duplex if not specified on command-line
1814 * CS8920 defaults to autoneg if not specified on command-line
1815 * Use reset defaults for other config parameters
1816
1817 * Assumptions:
1818 * media type specified is supported (circuitry is present)
1819 * if memory address is > 1MB, then required mem decode hw is present
1820 * if 10B-2, then agent other than driver will enable DC/DC converter
1821 (hw or software util)
1822
1823
1824 */
1825
1826 int __init init_module(void)
1827 {
1828 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
1829 struct net_local *lp;
1830 int ret = 0;
1831
1832 #if DEBUGGING
1833 net_debug = debug;
1834 #else
1835 debug = 0;
1836 #endif
1837 if (!dev)
1838 return -ENOMEM;
1839
1840 dev->irq = irq;
1841 dev->base_addr = io;
1842 lp = netdev_priv(dev);
1843
1844 #if ALLOW_DMA
1845 if (use_dma) {
1846 lp->use_dma = use_dma;
1847 lp->dma = dma;
1848 lp->dmasize = dmasize;
1849 }
1850 #endif
1851
1852 spin_lock_init(&lp->lock);
1853
1854 /* boy, they'd better get these right */
1855 if (!strcmp(media, "rj45"))
1856 lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
1857 else if (!strcmp(media, "aui"))
1858 lp->adapter_cnf = A_CNF_MEDIA_AUI | A_CNF_AUI;
1859 else if (!strcmp(media, "bnc"))
1860 lp->adapter_cnf = A_CNF_MEDIA_10B_2 | A_CNF_10B_2;
1861 else
1862 lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
1863
1864 if (duplex==-1)
1865 lp->auto_neg_cnf = AUTO_NEG_ENABLE;
1866
1867 if (io == 0) {
1868 printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n");
1869 printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n");
1870 ret = -EPERM;
1871 goto out;
1872 } else if (io <= 0x1ff) {
1873 ret = -ENXIO;
1874 goto out;
1875 }
1876
1877 #if ALLOW_DMA
1878 if (use_dma && dmasize != 16 && dmasize != 64) {
1879 printk(KERN_ERR "cs89x0.c: dma size must be either 16K or 64K, not %dK\n", dmasize);
1880 ret = -EPERM;
1881 goto out;
1882 }
1883 #endif
1884 ret = cs89x0_probe1(dev, io, 1);
1885 if (ret)
1886 goto out;
1887
1888 dev_cs89x0 = dev;
1889 return 0;
1890 out:
1891 free_netdev(dev);
1892 return ret;
1893 }
1894
1895 void __exit
1896 cleanup_module(void)
1897 {
1898 unregister_netdev(dev_cs89x0);
1899 writeword(dev_cs89x0->base_addr, ADD_PORT, PP_ChipID);
1900 release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
1901 free_netdev(dev_cs89x0);
1902 }
1903 #endif /* MODULE */
1904
1905 /*
1906 * Local variables:
1907 * version-control: t
1908 * kept-new-versions: 5
1909 * c-indent-level: 8
1910 * tab-width: 8
1911 * End:
1912 *
1913 */
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree