bridge: fix a possible use after free
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / block / paride / pd.c
blob869e7676d46f47abcb1ffe1812efd3316d234f74
1 /*
2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
18 drive2
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
21 Where,
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
35 (0 if not given)
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
39 (-1 if not given)
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
61 first drive found.
64 major You may use this parameter to overide the
65 default major number (45) that this driver
66 will use. Be sure to change the device
67 name as well.
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
72 (default "pd")
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
78 (default 64)
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
84 output. (default 0)
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
93 pd.drive0
94 pd.drive1
95 pd.drive2
96 pd.drive3
97 pd.cluster
98 pd.nice
100 In addition, you can use the parameter pd.disable to disable
101 the driver entirely.
105 /* Changes:
107 1.01 GRG 1997.01.24 Restored pd_reset()
108 Added eject ioctl
109 1.02 GRG 1998.05.06 SMP spinlock changes,
110 Added slave support
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
117 #define PD_VERSION "1.05"
118 #define PD_MAJOR 45
119 #define PD_NAME "pd"
120 #define PD_UNITS 4
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
124 by default.
128 static int verbose = 0;
129 static int major = PD_MAJOR;
130 static char *name = PD_NAME;
131 static int cluster = 64;
132 static int nice = 0;
133 static int disable = 0;
135 static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
136 static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
140 static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
142 enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
144 /* end of parameters */
146 #include <linux/init.h>
147 #include <linux/module.h>
148 #include <linux/gfp.h>
149 #include <linux/fs.h>
150 #include <linux/delay.h>
151 #include <linux/hdreg.h>
152 #include <linux/cdrom.h> /* for the eject ioctl */
153 #include <linux/blkdev.h>
154 #include <linux/blkpg.h>
155 #include <linux/kernel.h>
156 #include <linux/mutex.h>
157 #include <asm/uaccess.h>
158 #include <linux/workqueue.h>
160 static DEFINE_MUTEX(pd_mutex);
161 static DEFINE_SPINLOCK(pd_lock);
163 module_param(verbose, bool, 0);
164 module_param(major, int, 0);
165 module_param(name, charp, 0);
166 module_param(cluster, int, 0);
167 module_param(nice, int, 0);
168 module_param_array(drive0, int, NULL, 0);
169 module_param_array(drive1, int, NULL, 0);
170 module_param_array(drive2, int, NULL, 0);
171 module_param_array(drive3, int, NULL, 0);
173 #include "paride.h"
175 #define PD_BITS 4
177 /* numbers for "SCSI" geometry */
179 #define PD_LOG_HEADS 64
180 #define PD_LOG_SECTS 32
182 #define PD_ID_OFF 54
183 #define PD_ID_LEN 14
185 #define PD_MAX_RETRIES 5
186 #define PD_TMO 800 /* interrupt timeout in jiffies */
187 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
189 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
191 #define STAT_ERR 0x00001
192 #define STAT_INDEX 0x00002
193 #define STAT_ECC 0x00004
194 #define STAT_DRQ 0x00008
195 #define STAT_SEEK 0x00010
196 #define STAT_WRERR 0x00020
197 #define STAT_READY 0x00040
198 #define STAT_BUSY 0x00080
200 #define ERR_AMNF 0x00100
201 #define ERR_TK0NF 0x00200
202 #define ERR_ABRT 0x00400
203 #define ERR_MCR 0x00800
204 #define ERR_IDNF 0x01000
205 #define ERR_MC 0x02000
206 #define ERR_UNC 0x04000
207 #define ERR_TMO 0x10000
209 #define IDE_READ 0x20
210 #define IDE_WRITE 0x30
211 #define IDE_READ_VRFY 0x40
212 #define IDE_INIT_DEV_PARMS 0x91
213 #define IDE_STANDBY 0x96
214 #define IDE_ACKCHANGE 0xdb
215 #define IDE_DOORLOCK 0xde
216 #define IDE_DOORUNLOCK 0xdf
217 #define IDE_IDENTIFY 0xec
218 #define IDE_EJECT 0xed
220 #define PD_NAMELEN 8
222 struct pd_unit {
223 struct pi_adapter pia; /* interface to paride layer */
224 struct pi_adapter *pi;
225 int access; /* count of active opens ... */
226 int capacity; /* Size of this volume in sectors */
227 int heads; /* physical geometry */
228 int sectors;
229 int cylinders;
230 int can_lba;
231 int drive; /* master=0 slave=1 */
232 int changed; /* Have we seen a disk change ? */
233 int removable; /* removable media device ? */
234 int standby;
235 int alt_geom;
236 char name[PD_NAMELEN]; /* pda, pdb, etc ... */
237 struct gendisk *gd;
240 static struct pd_unit pd[PD_UNITS];
242 static char pd_scratch[512]; /* scratch block buffer */
244 static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
245 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
246 "IDNF", "MC", "UNC", "???", "TMO"
249 static inline int status_reg(struct pd_unit *disk)
251 return pi_read_regr(disk->pi, 1, 6);
254 static inline int read_reg(struct pd_unit *disk, int reg)
256 return pi_read_regr(disk->pi, 0, reg);
259 static inline void write_status(struct pd_unit *disk, int val)
261 pi_write_regr(disk->pi, 1, 6, val);
264 static inline void write_reg(struct pd_unit *disk, int reg, int val)
266 pi_write_regr(disk->pi, 0, reg, val);
269 static inline u8 DRIVE(struct pd_unit *disk)
271 return 0xa0+0x10*disk->drive;
274 /* ide command interface */
276 static void pd_print_error(struct pd_unit *disk, char *msg, int status)
278 int i;
280 printk("%s: %s: status = 0x%x =", disk->name, msg, status);
281 for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
282 if (status & (1 << i))
283 printk(" %s", pd_errs[i]);
284 printk("\n");
287 static void pd_reset(struct pd_unit *disk)
288 { /* called only for MASTER drive */
289 write_status(disk, 4);
290 udelay(50);
291 write_status(disk, 0);
292 udelay(250);
295 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
297 static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
298 { /* polled wait */
299 int k, r, e;
301 k = 0;
302 while (k < PD_SPIN) {
303 r = status_reg(disk);
304 k++;
305 if (((r & w) == w) && !(r & STAT_BUSY))
306 break;
307 udelay(PD_SPIN_DEL);
309 e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
310 if (k >= PD_SPIN)
311 e |= ERR_TMO;
312 if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
313 pd_print_error(disk, msg, e);
314 return e;
317 static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
319 write_reg(disk, 6, DRIVE(disk) + h);
320 write_reg(disk, 1, 0); /* the IDE task file */
321 write_reg(disk, 2, n);
322 write_reg(disk, 3, s);
323 write_reg(disk, 4, c0);
324 write_reg(disk, 5, c1);
325 write_reg(disk, 7, func);
327 udelay(1);
330 static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
332 int c1, c0, h, s;
334 if (disk->can_lba) {
335 s = block & 255;
336 c0 = (block >>= 8) & 255;
337 c1 = (block >>= 8) & 255;
338 h = ((block >>= 8) & 15) + 0x40;
339 } else {
340 s = (block % disk->sectors) + 1;
341 h = (block /= disk->sectors) % disk->heads;
342 c0 = (block /= disk->heads) % 256;
343 c1 = (block >>= 8);
345 pd_send_command(disk, count, s, h, c0, c1, func);
348 /* The i/o request engine */
350 enum action {Fail = 0, Ok = 1, Hold, Wait};
352 static struct request *pd_req; /* current request */
353 static enum action (*phase)(void);
355 static void run_fsm(void);
357 static void ps_tq_int(struct work_struct *work);
359 static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
361 static void schedule_fsm(void)
363 if (!nice)
364 schedule_delayed_work(&fsm_tq, 0);
365 else
366 schedule_delayed_work(&fsm_tq, nice-1);
369 static void ps_tq_int(struct work_struct *work)
371 run_fsm();
374 static enum action do_pd_io_start(void);
375 static enum action pd_special(void);
376 static enum action do_pd_read_start(void);
377 static enum action do_pd_write_start(void);
378 static enum action do_pd_read_drq(void);
379 static enum action do_pd_write_done(void);
381 static struct request_queue *pd_queue;
382 static int pd_claimed;
384 static struct pd_unit *pd_current; /* current request's drive */
385 static PIA *pi_current; /* current request's PIA */
387 static void run_fsm(void)
389 while (1) {
390 enum action res;
391 unsigned long saved_flags;
392 int stop = 0;
394 if (!phase) {
395 pd_current = pd_req->rq_disk->private_data;
396 pi_current = pd_current->pi;
397 phase = do_pd_io_start;
400 switch (pd_claimed) {
401 case 0:
402 pd_claimed = 1;
403 if (!pi_schedule_claimed(pi_current, run_fsm))
404 return;
405 case 1:
406 pd_claimed = 2;
407 pi_current->proto->connect(pi_current);
410 switch(res = phase()) {
411 case Ok: case Fail:
412 pi_disconnect(pi_current);
413 pd_claimed = 0;
414 phase = NULL;
415 spin_lock_irqsave(&pd_lock, saved_flags);
416 if (!__blk_end_request_cur(pd_req,
417 res == Ok ? 0 : -EIO)) {
418 pd_req = blk_fetch_request(pd_queue);
419 if (!pd_req)
420 stop = 1;
422 spin_unlock_irqrestore(&pd_lock, saved_flags);
423 if (stop)
424 return;
425 case Hold:
426 schedule_fsm();
427 return;
428 case Wait:
429 pi_disconnect(pi_current);
430 pd_claimed = 0;
435 static int pd_retries = 0; /* i/o error retry count */
436 static int pd_block; /* address of next requested block */
437 static int pd_count; /* number of blocks still to do */
438 static int pd_run; /* sectors in current cluster */
439 static int pd_cmd; /* current command READ/WRITE */
440 static char *pd_buf; /* buffer for request in progress */
442 static enum action do_pd_io_start(void)
444 if (pd_req->cmd_type == REQ_TYPE_SPECIAL) {
445 phase = pd_special;
446 return pd_special();
449 pd_cmd = rq_data_dir(pd_req);
450 if (pd_cmd == READ || pd_cmd == WRITE) {
451 pd_block = blk_rq_pos(pd_req);
452 pd_count = blk_rq_cur_sectors(pd_req);
453 if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
454 return Fail;
455 pd_run = blk_rq_sectors(pd_req);
456 pd_buf = pd_req->buffer;
457 pd_retries = 0;
458 if (pd_cmd == READ)
459 return do_pd_read_start();
460 else
461 return do_pd_write_start();
463 return Fail;
466 static enum action pd_special(void)
468 enum action (*func)(struct pd_unit *) = pd_req->special;
469 return func(pd_current);
472 static int pd_next_buf(void)
474 unsigned long saved_flags;
476 pd_count--;
477 pd_run--;
478 pd_buf += 512;
479 pd_block++;
480 if (!pd_run)
481 return 1;
482 if (pd_count)
483 return 0;
484 spin_lock_irqsave(&pd_lock, saved_flags);
485 __blk_end_request_cur(pd_req, 0);
486 pd_count = blk_rq_cur_sectors(pd_req);
487 pd_buf = pd_req->buffer;
488 spin_unlock_irqrestore(&pd_lock, saved_flags);
489 return 0;
492 static unsigned long pd_timeout;
494 static enum action do_pd_read_start(void)
496 if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
497 if (pd_retries < PD_MAX_RETRIES) {
498 pd_retries++;
499 return Wait;
501 return Fail;
503 pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
504 phase = do_pd_read_drq;
505 pd_timeout = jiffies + PD_TMO;
506 return Hold;
509 static enum action do_pd_write_start(void)
511 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
512 if (pd_retries < PD_MAX_RETRIES) {
513 pd_retries++;
514 return Wait;
516 return Fail;
518 pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
519 while (1) {
520 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
521 if (pd_retries < PD_MAX_RETRIES) {
522 pd_retries++;
523 return Wait;
525 return Fail;
527 pi_write_block(pd_current->pi, pd_buf, 512);
528 if (pd_next_buf())
529 break;
531 phase = do_pd_write_done;
532 pd_timeout = jiffies + PD_TMO;
533 return Hold;
536 static inline int pd_ready(void)
538 return !(status_reg(pd_current) & STAT_BUSY);
541 static enum action do_pd_read_drq(void)
543 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
544 return Hold;
546 while (1) {
547 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
548 if (pd_retries < PD_MAX_RETRIES) {
549 pd_retries++;
550 phase = do_pd_read_start;
551 return Wait;
553 return Fail;
555 pi_read_block(pd_current->pi, pd_buf, 512);
556 if (pd_next_buf())
557 break;
559 return Ok;
562 static enum action do_pd_write_done(void)
564 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
565 return Hold;
567 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
568 if (pd_retries < PD_MAX_RETRIES) {
569 pd_retries++;
570 phase = do_pd_write_start;
571 return Wait;
573 return Fail;
575 return Ok;
578 /* special io requests */
580 /* According to the ATA standard, the default CHS geometry should be
581 available following a reset. Some Western Digital drives come up
582 in a mode where only LBA addresses are accepted until the device
583 parameters are initialised.
586 static void pd_init_dev_parms(struct pd_unit *disk)
588 pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
589 pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
590 IDE_INIT_DEV_PARMS);
591 udelay(300);
592 pd_wait_for(disk, 0, "Initialise device parameters");
595 static enum action pd_door_lock(struct pd_unit *disk)
597 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
598 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
599 pd_wait_for(disk, STAT_READY, "Lock done");
601 return Ok;
604 static enum action pd_door_unlock(struct pd_unit *disk)
606 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
607 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
608 pd_wait_for(disk, STAT_READY, "Lock done");
610 return Ok;
613 static enum action pd_eject(struct pd_unit *disk)
615 pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
616 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
617 pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
618 pd_wait_for(disk, 0, DBMSG("before eject"));
619 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
620 pd_wait_for(disk, 0, DBMSG("after eject"));
621 return Ok;
624 static enum action pd_media_check(struct pd_unit *disk)
626 int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
627 if (!(r & STAT_ERR)) {
628 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
629 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
630 } else
631 disk->changed = 1; /* say changed if other error */
632 if (r & ERR_MC) {
633 disk->changed = 1;
634 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
635 pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
636 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
637 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
639 return Ok;
642 static void pd_standby_off(struct pd_unit *disk)
644 pd_wait_for(disk, 0, DBMSG("before STANDBY"));
645 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
646 pd_wait_for(disk, 0, DBMSG("after STANDBY"));
649 static enum action pd_identify(struct pd_unit *disk)
651 int j;
652 char id[PD_ID_LEN + 1];
654 /* WARNING: here there may be dragons. reset() applies to both drives,
655 but we call it only on probing the MASTER. This should allow most
656 common configurations to work, but be warned that a reset can clear
657 settings on the SLAVE drive.
660 if (disk->drive == 0)
661 pd_reset(disk);
663 write_reg(disk, 6, DRIVE(disk));
664 pd_wait_for(disk, 0, DBMSG("before IDENT"));
665 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
667 if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
668 return Fail;
669 pi_read_block(disk->pi, pd_scratch, 512);
670 disk->can_lba = pd_scratch[99] & 2;
671 disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
672 disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
673 disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
674 if (disk->can_lba)
675 disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
676 else
677 disk->capacity = disk->sectors * disk->heads * disk->cylinders;
679 for (j = 0; j < PD_ID_LEN; j++)
680 id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
681 j = PD_ID_LEN - 1;
682 while ((j >= 0) && (id[j] <= 0x20))
683 j--;
684 j++;
685 id[j] = 0;
687 disk->removable = pd_scratch[0] & 0x80;
689 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
690 disk->name, id,
691 disk->drive ? "slave" : "master",
692 disk->capacity, disk->capacity / 2048,
693 disk->cylinders, disk->heads, disk->sectors,
694 disk->removable ? "removable" : "fixed");
696 if (disk->capacity)
697 pd_init_dev_parms(disk);
698 if (!disk->standby)
699 pd_standby_off(disk);
701 return Ok;
704 /* end of io request engine */
706 static void do_pd_request(struct request_queue * q)
708 if (pd_req)
709 return;
710 pd_req = blk_fetch_request(q);
711 if (!pd_req)
712 return;
714 schedule_fsm();
717 static int pd_special_command(struct pd_unit *disk,
718 enum action (*func)(struct pd_unit *disk))
720 struct request *rq;
721 int err = 0;
723 rq = blk_get_request(disk->gd->queue, READ, __GFP_WAIT);
725 rq->cmd_type = REQ_TYPE_SPECIAL;
726 rq->special = func;
728 err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
730 blk_put_request(rq);
731 return err;
734 /* kernel glue structures */
736 static int pd_open(struct block_device *bdev, fmode_t mode)
738 struct pd_unit *disk = bdev->bd_disk->private_data;
740 mutex_lock(&pd_mutex);
741 disk->access++;
743 if (disk->removable) {
744 pd_special_command(disk, pd_media_check);
745 pd_special_command(disk, pd_door_lock);
747 mutex_unlock(&pd_mutex);
748 return 0;
751 static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
753 struct pd_unit *disk = bdev->bd_disk->private_data;
755 if (disk->alt_geom) {
756 geo->heads = PD_LOG_HEADS;
757 geo->sectors = PD_LOG_SECTS;
758 geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
759 } else {
760 geo->heads = disk->heads;
761 geo->sectors = disk->sectors;
762 geo->cylinders = disk->cylinders;
765 return 0;
768 static int pd_ioctl(struct block_device *bdev, fmode_t mode,
769 unsigned int cmd, unsigned long arg)
771 struct pd_unit *disk = bdev->bd_disk->private_data;
773 switch (cmd) {
774 case CDROMEJECT:
775 mutex_lock(&pd_mutex);
776 if (disk->access == 1)
777 pd_special_command(disk, pd_eject);
778 mutex_unlock(&pd_mutex);
779 return 0;
780 default:
781 return -EINVAL;
785 static int pd_release(struct gendisk *p, fmode_t mode)
787 struct pd_unit *disk = p->private_data;
789 mutex_lock(&pd_mutex);
790 if (!--disk->access && disk->removable)
791 pd_special_command(disk, pd_door_unlock);
792 mutex_unlock(&pd_mutex);
794 return 0;
797 static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing)
799 struct pd_unit *disk = p->private_data;
800 int r;
801 if (!disk->removable)
802 return 0;
803 pd_special_command(disk, pd_media_check);
804 r = disk->changed;
805 disk->changed = 0;
806 return r ? DISK_EVENT_MEDIA_CHANGE : 0;
809 static int pd_revalidate(struct gendisk *p)
811 struct pd_unit *disk = p->private_data;
812 if (pd_special_command(disk, pd_identify) == 0)
813 set_capacity(p, disk->capacity);
814 else
815 set_capacity(p, 0);
816 return 0;
819 static const struct block_device_operations pd_fops = {
820 .owner = THIS_MODULE,
821 .open = pd_open,
822 .release = pd_release,
823 .ioctl = pd_ioctl,
824 .getgeo = pd_getgeo,
825 .check_events = pd_check_events,
826 .revalidate_disk= pd_revalidate
829 /* probing */
831 static void pd_probe_drive(struct pd_unit *disk)
833 struct gendisk *p = alloc_disk(1 << PD_BITS);
834 if (!p)
835 return;
836 strcpy(p->disk_name, disk->name);
837 p->fops = &pd_fops;
838 p->major = major;
839 p->first_minor = (disk - pd) << PD_BITS;
840 disk->gd = p;
841 p->private_data = disk;
842 p->queue = pd_queue;
844 if (disk->drive == -1) {
845 for (disk->drive = 0; disk->drive <= 1; disk->drive++)
846 if (pd_special_command(disk, pd_identify) == 0)
847 return;
848 } else if (pd_special_command(disk, pd_identify) == 0)
849 return;
850 disk->gd = NULL;
851 put_disk(p);
854 static int pd_detect(void)
856 int found = 0, unit, pd_drive_count = 0;
857 struct pd_unit *disk;
859 for (unit = 0; unit < PD_UNITS; unit++) {
860 int *parm = *drives[unit];
861 struct pd_unit *disk = pd + unit;
862 disk->pi = &disk->pia;
863 disk->access = 0;
864 disk->changed = 1;
865 disk->capacity = 0;
866 disk->drive = parm[D_SLV];
867 snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit);
868 disk->alt_geom = parm[D_GEO];
869 disk->standby = parm[D_SBY];
870 if (parm[D_PRT])
871 pd_drive_count++;
874 if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
875 disk = pd;
876 if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch,
877 PI_PD, verbose, disk->name)) {
878 pd_probe_drive(disk);
879 if (!disk->gd)
880 pi_release(disk->pi);
883 } else {
884 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
885 int *parm = *drives[unit];
886 if (!parm[D_PRT])
887 continue;
888 if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD],
889 parm[D_UNI], parm[D_PRO], parm[D_DLY],
890 pd_scratch, PI_PD, verbose, disk->name)) {
891 pd_probe_drive(disk);
892 if (!disk->gd)
893 pi_release(disk->pi);
897 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
898 if (disk->gd) {
899 set_capacity(disk->gd, disk->capacity);
900 add_disk(disk->gd);
901 found = 1;
904 if (!found)
905 printk("%s: no valid drive found\n", name);
906 return found;
909 static int __init pd_init(void)
911 if (disable)
912 goto out1;
914 pd_queue = blk_init_queue(do_pd_request, &pd_lock);
915 if (!pd_queue)
916 goto out1;
918 blk_queue_max_hw_sectors(pd_queue, cluster);
920 if (register_blkdev(major, name))
921 goto out2;
923 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
924 name, name, PD_VERSION, major, cluster, nice);
925 if (!pd_detect())
926 goto out3;
928 return 0;
930 out3:
931 unregister_blkdev(major, name);
932 out2:
933 blk_cleanup_queue(pd_queue);
934 out1:
935 return -ENODEV;
938 static void __exit pd_exit(void)
940 struct pd_unit *disk;
941 int unit;
942 unregister_blkdev(major, name);
943 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
944 struct gendisk *p = disk->gd;
945 if (p) {
946 disk->gd = NULL;
947 del_gendisk(p);
948 put_disk(p);
949 pi_release(disk->pi);
952 blk_cleanup_queue(pd_queue);
955 MODULE_LICENSE("GPL");
956 module_init(pd_init)
957 module_exit(pd_exit)