drivers/regulator/ab8500.c

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2010
   3  *
   4  * License Terms: GNU General Public License v2
   5  *
   6  * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
   7  *
   8  * AB8500 peripheral regulators
   9  *
  10  * AB8500 supports the following regulators,
  11  * LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT,
  12  *        VAUX1/2/3, VANA
  13  *
  14  * for DB8500 cut 1.0 and previous versions of the silicon, all accesses
  15  * to registers are through the DB8500 SPI. In cut 1.1 onwards, these
  16  * accesses are through the DB8500 PRCMU I2C
  17  *
  18  */
  19 #include <linux/init.h>
  20 #include <linux/kernel.h>
  21 #include <linux/err.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/mfd/ab8500.h>
  24 #include <linux/mfd/abx500.h>
  25 #include <linux/regulator/driver.h>
  26 #include <linux/regulator/machine.h>
  27 #include <linux/regulator/ab8500.h>
  28
  29 /**
  30  * struct ab8500_regulator_info - ab8500 regulator information
  31  * @desc: regulator description
  32  * @ab8500: ab8500 parent
  33  * @regulator_dev: regulator device
  34  * @max_uV: maximum voltage (for variable voltage supplies)
  35  * @min_uV: minimum voltage (for variable voltage supplies)
  36  * @fixed_uV: typical voltage (for fixed voltage supplies)
  37  * @update_bank: bank to control on/off
  38  * @update_reg: register to control on/off
  39  * @mask: mask to enable/disable regulator
  40  * @enable: bits to enable the regulator in normal(high power) mode
  41  * @voltage_bank: bank to control regulator voltage
  42  * @voltage_reg: register to control regulator voltage
  43  * @voltage_mask: mask to control regulator voltage
  44  * @supported_voltages: supported voltage table
  45  * @voltages_len: number of supported voltages for the regulator
  46  */
  47 struct ab8500_regulator_info {
  48         struct device           *dev;
  49         struct regulator_desc   desc;
  50         struct ab8500           *ab8500;
  51         struct regulator_dev    *regulator;
  52         int max_uV;
  53         int min_uV;
  54         int fixed_uV;
  55         u8 update_bank;
  56         u8 update_reg;
  57         u8 mask;
  58         u8 enable;
  59         u8 voltage_bank;
  60         u8 voltage_reg;
  61         u8 voltage_mask;
  62         int const *supported_voltages;
  63         int voltages_len;
  64 };
  65
  66 /* voltage tables for the vauxn/vintcore supplies */
  67 static const int ldo_vauxn_voltages[] = {
  68         1100000,
  69         1200000,
  70         1300000,
  71         1400000,
  72         1500000,
  73         1800000,
  74         1850000,
  75         1900000,
  76         2500000,
  77         2650000,
  78         2700000,
  79         2750000,
  80         2800000,
  81         2900000,
  82         3000000,
  83         3300000,
  84 };
  85
  86 static const int ldo_vintcore_voltages[] = {
  87         1200000,
  88         1225000,
  89         1250000,
  90         1275000,
  91         1300000,
  92         1325000,
  93         1350000,
  94 };
  95
  96 static int ab8500_regulator_enable(struct regulator_dev *rdev)
  97 {
  98         int regulator_id, ret;
  99         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 100
 101         regulator_id = rdev_get_id(rdev);
 102         if (regulator_id >= AB8500_NUM_REGULATORS)
 103                 return -EINVAL;
 104
 105         ret = abx500_mask_and_set_register_interruptible(info->dev,
 106                 info->update_bank, info->update_reg, info->mask, info->enable);
 107         if (ret < 0)
 108                 dev_err(rdev_get_dev(rdev),
 109                         "couldn't set enable bits for regulator\n");
 110         return ret;
 111 }
 112
 113 static int ab8500_regulator_disable(struct regulator_dev *rdev)
 114 {
 115         int regulator_id, ret;
 116         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 117
 118         regulator_id = rdev_get_id(rdev);
 119         if (regulator_id >= AB8500_NUM_REGULATORS)
 120                 return -EINVAL;
 121
 122         ret = abx500_mask_and_set_register_interruptible(info->dev,
 123                 info->update_bank, info->update_reg, info->mask, 0x0);
 124         if (ret < 0)
 125                 dev_err(rdev_get_dev(rdev),
 126                         "couldn't set disable bits for regulator\n");
 127         return ret;
 128 }
 129
 130 static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
 131 {
 132         int regulator_id, ret;
 133         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 134         u8 value;
 135
 136         regulator_id = rdev_get_id(rdev);
 137         if (regulator_id >= AB8500_NUM_REGULATORS)
 138                 return -EINVAL;
 139
 140         ret = abx500_get_register_interruptible(info->dev,
 141                 info->update_bank, info->update_reg, &value);
 142         if (ret < 0) {
 143                 dev_err(rdev_get_dev(rdev),
 144                         "couldn't read 0x%x register\n", info->update_reg);
 145                 return ret;
 146         }
 147
 148         if (value & info->mask)
 149                 return true;
 150         else
 151                 return false;
 152 }
 153
 154 static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
 155 {
 156         int regulator_id;
 157         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 158
 159         regulator_id = rdev_get_id(rdev);
 160         if (regulator_id >= AB8500_NUM_REGULATORS)
 161                 return -EINVAL;
 162
 163         /* return the uV for the fixed regulators */
 164         if (info->fixed_uV)
 165                 return info->fixed_uV;
 166
 167         if (selector >= info->voltages_len)
 168                 return -EINVAL;
 169
 170         return info->supported_voltages[selector];
 171 }
 172
 173 static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
 174 {
 175         int regulator_id, ret;
 176         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 177         u8 value;
 178
 179         regulator_id = rdev_get_id(rdev);
 180         if (regulator_id >= AB8500_NUM_REGULATORS)
 181                 return -EINVAL;
 182
 183         ret = abx500_get_register_interruptible(info->dev, info->voltage_bank,
 184                 info->voltage_reg, &value);
 185         if (ret < 0) {
 186                 dev_err(rdev_get_dev(rdev),
 187                         "couldn't read voltage reg for regulator\n");
 188                 return ret;
 189         }
 190
 191         /* vintcore has a different layout */
 192         value &= info->voltage_mask;
 193         if (regulator_id == AB8500_LDO_INTCORE)
 194                 ret = info->supported_voltages[value >> 0x3];
 195         else
 196                 ret = info->supported_voltages[value];
 197
 198         return ret;
 199 }
 200
 201 static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
 202                 int min_uV, int max_uV)
 203 {
 204         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 205         int i;
 206
 207         /* check the supported voltage */
 208         for (i = 0; i < info->voltages_len; i++) {
 209                 if ((info->supported_voltages[i] >= min_uV) &&
 210                     (info->supported_voltages[i] <= max_uV))
 211                         return i;
 212         }
 213
 214         return -EINVAL;
 215 }
 216
 217 static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
 218                 int min_uV, int max_uV)
 219 {
 220         int regulator_id, ret;
 221         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 222
 223         regulator_id = rdev_get_id(rdev);
 224         if (regulator_id >= AB8500_NUM_REGULATORS)
 225                 return -EINVAL;
 226
 227         /* get the appropriate voltages within the range */
 228         ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
 229         if (ret < 0) {
 230                 dev_err(rdev_get_dev(rdev),
 231                                 "couldn't get best voltage for regulator\n");
 232                 return ret;
 233         }
 234
 235         /* set the registers for the request */
 236         ret = abx500_mask_and_set_register_interruptible(info->dev,
 237                 info->voltage_bank, info->voltage_reg,
 238                 info->voltage_mask, (u8)ret);
 239         if (ret < 0)
 240                 dev_err(rdev_get_dev(rdev),
 241                 "couldn't set voltage reg for regulator\n");
 242
 243         return ret;
 244 }
 245
 246 static struct regulator_ops ab8500_regulator_ops = {
 247         .enable         = ab8500_regulator_enable,
 248         .disable        = ab8500_regulator_disable,
 249         .is_enabled     = ab8500_regulator_is_enabled,
 250         .get_voltage    = ab8500_regulator_get_voltage,
 251         .set_voltage    = ab8500_regulator_set_voltage,
 252         .list_voltage   = ab8500_list_voltage,
 253 };
 254
 255 static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
 256 {
 257         int regulator_id;
 258         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 259
 260         regulator_id = rdev_get_id(rdev);
 261         if (regulator_id >= AB8500_NUM_REGULATORS)
 262                 return -EINVAL;
 263
 264         return info->fixed_uV;
 265 }
 266
 267 static struct regulator_ops ab8500_ldo_fixed_ops = {
 268         .enable         = ab8500_regulator_enable,
 269         .disable        = ab8500_regulator_disable,
 270         .is_enabled     = ab8500_regulator_is_enabled,
 271         .get_voltage    = ab8500_fixed_get_voltage,
 272         .list_voltage   = ab8500_list_voltage,
 273 };
 274
 275 #define AB8500_LDO(_id, min, max, bank, reg, reg_mask,          \
 276                 reg_enable, volt_bank, volt_reg, volt_mask,     \
 277                 voltages, len_volts)                            \
 278 {                                                               \
 279         .desc   = {                                             \
 280                 .name   = "LDO-" #_id,                          \
 281                 .ops    = &ab8500_regulator_ops,                \
 282                 .type   = REGULATOR_VOLTAGE,                    \
 283                 .id     = AB8500_LDO_##_id,                     \
 284                 .owner  = THIS_MODULE,                          \
 285         },                                                      \
 286         .min_uV         = (min) * 1000,                         \
 287         .max_uV         = (max) * 1000,                         \
 288         .update_bank    = bank,                                 \
 289         .update_reg     = reg,                                  \
 290         .mask           = reg_mask,                             \
 291         .enable         = reg_enable,                           \
 292         .voltage_bank   = volt_bank,                            \
 293         .voltage_reg    = volt_reg,                             \
 294         .voltage_mask   = volt_mask,                            \
 295         .supported_voltages = voltages,                         \
 296         .voltages_len   = len_volts,                            \
 297         .fixed_uV       = 0,                                    \
 298 }
 299
 300 #define AB8500_FIXED_LDO(_id, fixed, bank, reg,         \
 301                         reg_mask, reg_enable)           \
 302 {                                                       \
 303         .desc   = {                                     \
 304                 .name   = "LDO-" #_id,                  \
 305                 .ops    = &ab8500_ldo_fixed_ops,        \
 306                 .type   = REGULATOR_VOLTAGE,            \
 307                 .id     = AB8500_LDO_##_id,             \
 308                 .owner  = THIS_MODULE,                  \
 309         },                                              \
 310         .fixed_uV       = fixed * 1000,                 \
 311         .update_bank    = bank,                         \
 312         .update_reg     = reg,                          \
 313         .mask           = reg_mask,                     \
 314         .enable         = reg_enable,                   \
 315 }
 316
 317 static struct ab8500_regulator_info ab8500_regulator_info[] = {
 318         /*
 319          * Variable Voltage LDOs
 320          * name, min uV, max uV, ctrl bank, ctrl reg, reg mask, enable mask,
 321          *      volt ctrl bank, volt ctrl reg, volt ctrl mask, volt table,
 322          *      num supported volts
 323          */
 324         AB8500_LDO(AUX1, 1100, 3300, 0x04, 0x09, 0x3, 0x1, 0x04, 0x1f, 0xf,
 325                         ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 326         AB8500_LDO(AUX2, 1100, 3300, 0x04, 0x09, 0xc, 0x4, 0x04, 0x20, 0xf,
 327                         ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 328         AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0xf,
 329                         ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 330         AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x4, 0x4, 0x03, 0x80, 0x38,
 331                 ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
 332
 333         /*
 334          * Fixed Voltage LDOs
 335          *               name,  o/p uV, ctrl bank, ctrl reg, enable, disable
 336          */
 337         AB8500_FIXED_LDO(TVOUT,   2000, 0x03,      0x80,     0x2,    0x2),
 338         AB8500_FIXED_LDO(AUDIO,   2000, 0x03,      0x83,     0x2,    0x2),
 339         AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03,      0x83,     0x4,    0x4),
 340         AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03,      0x83,     0x8,    0x8),
 341         AB8500_FIXED_LDO(DMIC,    1800, 0x03,      0x83,     0x10,   0x10),
 342         AB8500_FIXED_LDO(ANA,     1200, 0x03,      0x83,     0xc,    0x4),
 343 };
 344
 345 static inline struct ab8500_regulator_info *find_regulator_info(int id)
 346 {
 347         struct ab8500_regulator_info *info;
 348         int i;
 349
 350         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 351                 info = &ab8500_regulator_info[i];
 352                 if (info->desc.id == id)
 353                         return info;
 354         }
 355         return NULL;
 356 }
 357
 358 static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 359 {
 360         struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 361         struct ab8500_platform_data *pdata;
 362         int i, err;
 363
 364         if (!ab8500) {
 365                 dev_err(&pdev->dev, "null mfd parent\n");
 366                 return -EINVAL;
 367         }
 368         pdata = dev_get_platdata(ab8500->dev);
 369
 370         /* register all regulators */
 371         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 372                 struct ab8500_regulator_info *info = NULL;
 373
 374                 /* assign per-regulator data */
 375                 info = &ab8500_regulator_info[i];
 376                 info->dev = &pdev->dev;
 377                 info->ab8500 = ab8500;
 378
 379                 info->regulator = regulator_register(&info->desc, &pdev->dev,
 380                                 pdata->regulator[i], info);
 381                 if (IS_ERR(info->regulator)) {
 382                         err = PTR_ERR(info->regulator);
 383                         dev_err(&pdev->dev, "failed to register regulator %s\n",
 384                                         info->desc.name);
 385                         /* when we fail, un-register all earlier regulators */
 386                         while (--i >= 0) {
 387                                 info = &ab8500_regulator_info[i];
 388                                 regulator_unregister(info->regulator);
 389                         }
 390                         return err;
 391                 }
 392         }
 393
 394         return 0;
 395 }
 396
 397 static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
 398 {
 399         int i;
 400
 401         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 402                 struct ab8500_regulator_info *info = NULL;
 403                 info = &ab8500_regulator_info[i];
 404                 regulator_unregister(info->regulator);
 405         }
 406
 407         return 0;
 408 }
 409
 410 static struct platform_driver ab8500_regulator_driver = {
 411         .probe = ab8500_regulator_probe,
 412         .remove = __devexit_p(ab8500_regulator_remove),
 413         .driver         = {
 414                 .name   = "ab8500-regulator",
 415                 .owner  = THIS_MODULE,
 416         },
 417 };
 418
 419 static int __init ab8500_regulator_init(void)
 420 {
 421         int ret;
 422
 423         ret = platform_driver_register(&ab8500_regulator_driver);
 424         if (ret != 0)
 425                 pr_err("Failed to register ab8500 regulator: %d\n", ret);
 426
 427         return ret;
 428 }
 429 subsys_initcall(ab8500_regulator_init);
 430
 431 static void __exit ab8500_regulator_exit(void)
 432 {
 433         platform_driver_unregister(&ab8500_regulator_driver);
 434 }
 435 module_exit(ab8500_regulator_exit);
 436
 437 MODULE_LICENSE("GPL v2");
 438 MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
 439 MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
 440 MODULE_ALIAS("platform:ab8500-regulator");