2 * Network device driver for the MACE ethernet controller on
3 * Apple Powermacs. Assumes it's under a DBDMA controller.
5 * Copyright (C) 1996 Paul Mackerras.
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/netdevice.h>
11 #include <linux/etherdevice.h>
12 #include <linux/delay.h>
13 #include <linux/string.h>
14 #include <linux/timer.h>
15 #include <linux/init.h>
16 #include <linux/crc32.h>
17 #include <linux/spinlock.h>
18 #include <linux/bitrev.h>
20 #include <asm/dbdma.h>
22 #include <asm/pgtable.h>
23 #include <asm/macio.h>
27 static int port_aaui
= -1;
31 #define MAX_TX_ACTIVE 1
32 #define NCMDS_TX 1 /* dma commands per element in tx ring */
33 #define RX_BUFLEN (ETH_FRAME_LEN + 8)
34 #define TX_TIMEOUT HZ /* 1 second */
36 /* Chip rev needs workaround on HW & multicast addr change */
37 #define BROKEN_ADDRCHG_REV 0x0941
39 /* Bits in transmit DMA status */
40 #define TX_DMA_ERR 0x80
43 volatile struct mace __iomem
*mace
;
44 volatile struct dbdma_regs __iomem
*tx_dma
;
46 volatile struct dbdma_regs __iomem
*rx_dma
;
48 volatile struct dbdma_cmd
*tx_cmds
; /* xmit dma command list */
49 volatile struct dbdma_cmd
*rx_cmds
; /* recv dma command list */
50 struct sk_buff
*rx_bufs
[N_RX_RING
];
53 struct sk_buff
*tx_bufs
[N_TX_RING
];
57 unsigned char tx_fullup
;
58 unsigned char tx_active
;
59 unsigned char tx_bad_runt
;
60 struct timer_list tx_timeout
;
64 struct macio_dev
*mdev
;
69 * Number of bytes of private data per MACE: allow enough for
70 * the rx and tx dma commands plus a branch dma command each,
71 * and another 16 bytes to allow us to align the dma command
72 * buffers on a 16 byte boundary.
74 #define PRIV_BYTES (sizeof(struct mace_data) \
75 + (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd))
77 static int mace_open(struct net_device
*dev
);
78 static int mace_close(struct net_device
*dev
);
79 static int mace_xmit_start(struct sk_buff
*skb
, struct net_device
*dev
);
80 static void mace_set_multicast(struct net_device
*dev
);
81 static void mace_reset(struct net_device
*dev
);
82 static int mace_set_address(struct net_device
*dev
, void *addr
);
83 static irqreturn_t
mace_interrupt(int irq
, void *dev_id
);
84 static irqreturn_t
mace_txdma_intr(int irq
, void *dev_id
);
85 static irqreturn_t
mace_rxdma_intr(int irq
, void *dev_id
);
86 static void mace_set_timeout(struct net_device
*dev
);
87 static void mace_tx_timeout(unsigned long data
);
88 static inline void dbdma_reset(volatile struct dbdma_regs __iomem
*dma
);
89 static inline void mace_clean_rings(struct mace_data
*mp
);
90 static void __mace_set_address(struct net_device
*dev
, void *addr
);
93 * If we can't get a skbuff when we need it, we use this area for DMA.
95 static unsigned char *dummy_buf
;
97 static int __devinit
mace_probe(struct macio_dev
*mdev
, const struct of_device_id
*match
)
99 struct device_node
*mace
= macio_get_of_node(mdev
);
100 struct net_device
*dev
;
101 struct mace_data
*mp
;
102 const unsigned char *addr
;
103 int j
, rev
, rc
= -EBUSY
;
104 DECLARE_MAC_BUF(mac
);
106 if (macio_resource_count(mdev
) != 3 || macio_irq_count(mdev
) != 3) {
107 printk(KERN_ERR
"can't use MACE %s: need 3 addrs and 3 irqs\n",
112 addr
= of_get_property(mace
, "mac-address", NULL
);
114 addr
= of_get_property(mace
, "local-mac-address", NULL
);
116 printk(KERN_ERR
"Can't get mac-address for MACE %s\n",
123 * lazy allocate the driver-wide dummy buffer. (Note that we
124 * never have more than one MACE in the system anyway)
126 if (dummy_buf
== NULL
) {
127 dummy_buf
= kmalloc(RX_BUFLEN
+2, GFP_KERNEL
);
128 if (dummy_buf
== NULL
) {
129 printk(KERN_ERR
"MACE: couldn't allocate dummy buffer\n");
134 if (macio_request_resources(mdev
, "mace")) {
135 printk(KERN_ERR
"MACE: can't request IO resources !\n");
139 dev
= alloc_etherdev(PRIV_BYTES
);
141 printk(KERN_ERR
"MACE: can't allocate ethernet device !\n");
145 SET_NETDEV_DEV(dev
, &mdev
->ofdev
.dev
);
149 macio_set_drvdata(mdev
, dev
);
151 dev
->base_addr
= macio_resource_start(mdev
, 0);
152 mp
->mace
= ioremap(dev
->base_addr
, 0x1000);
153 if (mp
->mace
== NULL
) {
154 printk(KERN_ERR
"MACE: can't map IO resources !\n");
158 dev
->irq
= macio_irq(mdev
, 0);
160 rev
= addr
[0] == 0 && addr
[1] == 0xA0;
161 for (j
= 0; j
< 6; ++j
) {
162 dev
->dev_addr
[j
] = rev
? bitrev8(addr
[j
]): addr
[j
];
164 mp
->chipid
= (in_8(&mp
->mace
->chipid_hi
) << 8) |
165 in_8(&mp
->mace
->chipid_lo
);
168 mp
= (struct mace_data
*) dev
->priv
;
169 mp
->maccc
= ENXMT
| ENRCV
;
171 mp
->tx_dma
= ioremap(macio_resource_start(mdev
, 1), 0x1000);
172 if (mp
->tx_dma
== NULL
) {
173 printk(KERN_ERR
"MACE: can't map TX DMA resources !\n");
177 mp
->tx_dma_intr
= macio_irq(mdev
, 1);
179 mp
->rx_dma
= ioremap(macio_resource_start(mdev
, 2), 0x1000);
180 if (mp
->rx_dma
== NULL
) {
181 printk(KERN_ERR
"MACE: can't map RX DMA resources !\n");
183 goto err_unmap_tx_dma
;
185 mp
->rx_dma_intr
= macio_irq(mdev
, 2);
187 mp
->tx_cmds
= (volatile struct dbdma_cmd
*) DBDMA_ALIGN(mp
+ 1);
188 mp
->rx_cmds
= mp
->tx_cmds
+ NCMDS_TX
* N_TX_RING
+ 1;
190 memset((char *) mp
->tx_cmds
, 0,
191 (NCMDS_TX
*N_TX_RING
+ N_RX_RING
+ 2) * sizeof(struct dbdma_cmd
));
192 init_timer(&mp
->tx_timeout
);
193 spin_lock_init(&mp
->lock
);
194 mp
->timeout_active
= 0;
197 mp
->port_aaui
= port_aaui
;
199 /* Apple Network Server uses the AAUI port */
200 if (machine_is_compatible("AAPL,ShinerESB"))
203 #ifdef CONFIG_MACE_AAUI_PORT
211 dev
->open
= mace_open
;
212 dev
->stop
= mace_close
;
213 dev
->hard_start_xmit
= mace_xmit_start
;
214 dev
->set_multicast_list
= mace_set_multicast
;
215 dev
->set_mac_address
= mace_set_address
;
218 * Most of what is below could be moved to mace_open()
222 rc
= request_irq(dev
->irq
, mace_interrupt
, 0, "MACE", dev
);
224 printk(KERN_ERR
"MACE: can't get irq %d\n", dev
->irq
);
225 goto err_unmap_rx_dma
;
227 rc
= request_irq(mp
->tx_dma_intr
, mace_txdma_intr
, 0, "MACE-txdma", dev
);
229 printk(KERN_ERR
"MACE: can't get irq %d\n", mp
->tx_dma_intr
);
232 rc
= request_irq(mp
->rx_dma_intr
, mace_rxdma_intr
, 0, "MACE-rxdma", dev
);
234 printk(KERN_ERR
"MACE: can't get irq %d\n", mp
->rx_dma_intr
);
235 goto err_free_tx_irq
;
238 rc
= register_netdev(dev
);
240 printk(KERN_ERR
"MACE: Cannot register net device, aborting.\n");
241 goto err_free_rx_irq
;
244 printk(KERN_INFO
"%s: MACE at %s, chip revision %d.%d\n",
245 dev
->name
, print_mac(mac
, dev
->dev_addr
),
246 mp
->chipid
>> 8, mp
->chipid
& 0xff);
251 free_irq(macio_irq(mdev
, 2), dev
);
253 free_irq(macio_irq(mdev
, 1), dev
);
255 free_irq(macio_irq(mdev
, 0), dev
);
265 macio_release_resources(mdev
);
270 static int __devexit
mace_remove(struct macio_dev
*mdev
)
272 struct net_device
*dev
= macio_get_drvdata(mdev
);
273 struct mace_data
*mp
;
277 macio_set_drvdata(mdev
, NULL
);
281 unregister_netdev(dev
);
283 free_irq(dev
->irq
, dev
);
284 free_irq(mp
->tx_dma_intr
, dev
);
285 free_irq(mp
->rx_dma_intr
, dev
);
293 macio_release_resources(mdev
);
298 static void dbdma_reset(volatile struct dbdma_regs __iomem
*dma
)
302 out_le32(&dma
->control
, (WAKE
|FLUSH
|PAUSE
|RUN
) << 16);
305 * Yes this looks peculiar, but apparently it needs to be this
306 * way on some machines.
308 for (i
= 200; i
> 0; --i
)
309 if (ld_le32(&dma
->control
) & RUN
)
313 static void mace_reset(struct net_device
*dev
)
315 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
316 volatile struct mace __iomem
*mb
= mp
->mace
;
319 /* soft-reset the chip */
322 out_8(&mb
->biucc
, SWRST
);
323 if (in_8(&mb
->biucc
) & SWRST
) {
330 printk(KERN_ERR
"mace: cannot reset chip!\n");
334 out_8(&mb
->imr
, 0xff); /* disable all intrs for now */
336 out_8(&mb
->maccc
, 0); /* turn off tx, rx */
338 out_8(&mb
->biucc
, XMTSP_64
);
339 out_8(&mb
->utr
, RTRD
);
340 out_8(&mb
->fifocc
, RCVFW_32
| XMTFW_16
| XMTFWU
| RCVFWU
| XMTBRST
);
341 out_8(&mb
->xmtfc
, AUTO_PAD_XMIT
); /* auto-pad short frames */
342 out_8(&mb
->rcvfc
, 0);
344 /* load up the hardware address */
345 __mace_set_address(dev
, dev
->dev_addr
);
347 /* clear the multicast filter */
348 if (mp
->chipid
== BROKEN_ADDRCHG_REV
)
349 out_8(&mb
->iac
, LOGADDR
);
351 out_8(&mb
->iac
, ADDRCHG
| LOGADDR
);
352 while ((in_8(&mb
->iac
) & ADDRCHG
) != 0)
355 for (i
= 0; i
< 8; ++i
)
356 out_8(&mb
->ladrf
, 0);
358 /* done changing address */
359 if (mp
->chipid
!= BROKEN_ADDRCHG_REV
)
363 out_8(&mb
->plscc
, PORTSEL_AUI
+ ENPLSIO
);
365 out_8(&mb
->plscc
, PORTSEL_GPSI
+ ENPLSIO
);
368 static void __mace_set_address(struct net_device
*dev
, void *addr
)
370 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
371 volatile struct mace __iomem
*mb
= mp
->mace
;
372 unsigned char *p
= addr
;
375 /* load up the hardware address */
376 if (mp
->chipid
== BROKEN_ADDRCHG_REV
)
377 out_8(&mb
->iac
, PHYADDR
);
379 out_8(&mb
->iac
, ADDRCHG
| PHYADDR
);
380 while ((in_8(&mb
->iac
) & ADDRCHG
) != 0)
383 for (i
= 0; i
< 6; ++i
)
384 out_8(&mb
->padr
, dev
->dev_addr
[i
] = p
[i
]);
385 if (mp
->chipid
!= BROKEN_ADDRCHG_REV
)
389 static int mace_set_address(struct net_device
*dev
, void *addr
)
391 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
392 volatile struct mace __iomem
*mb
= mp
->mace
;
395 spin_lock_irqsave(&mp
->lock
, flags
);
397 __mace_set_address(dev
, addr
);
399 /* note: setting ADDRCHG clears ENRCV */
400 out_8(&mb
->maccc
, mp
->maccc
);
402 spin_unlock_irqrestore(&mp
->lock
, flags
);
406 static inline void mace_clean_rings(struct mace_data
*mp
)
410 /* free some skb's */
411 for (i
= 0; i
< N_RX_RING
; ++i
) {
412 if (mp
->rx_bufs
[i
] != NULL
) {
413 dev_kfree_skb(mp
->rx_bufs
[i
]);
414 mp
->rx_bufs
[i
] = NULL
;
417 for (i
= mp
->tx_empty
; i
!= mp
->tx_fill
; ) {
418 dev_kfree_skb(mp
->tx_bufs
[i
]);
419 if (++i
>= N_TX_RING
)
424 static int mace_open(struct net_device
*dev
)
426 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
427 volatile struct mace __iomem
*mb
= mp
->mace
;
428 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
429 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
430 volatile struct dbdma_cmd
*cp
;
438 /* initialize list of sk_buffs for receiving and set up recv dma */
439 mace_clean_rings(mp
);
440 memset((char *)mp
->rx_cmds
, 0, N_RX_RING
* sizeof(struct dbdma_cmd
));
442 for (i
= 0; i
< N_RX_RING
- 1; ++i
) {
443 skb
= dev_alloc_skb(RX_BUFLEN
+ 2);
447 skb_reserve(skb
, 2); /* so IP header lands on 4-byte bdry */
450 mp
->rx_bufs
[i
] = skb
;
451 st_le16(&cp
->req_count
, RX_BUFLEN
);
452 st_le16(&cp
->command
, INPUT_LAST
+ INTR_ALWAYS
);
453 st_le32(&cp
->phy_addr
, virt_to_bus(data
));
457 mp
->rx_bufs
[i
] = NULL
;
458 st_le16(&cp
->command
, DBDMA_STOP
);
462 /* Put a branch back to the beginning of the receive command list */
464 st_le16(&cp
->command
, DBDMA_NOP
+ BR_ALWAYS
);
465 st_le32(&cp
->cmd_dep
, virt_to_bus(mp
->rx_cmds
));
468 out_le32(&rd
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16); /* clear run bit */
469 out_le32(&rd
->cmdptr
, virt_to_bus(mp
->rx_cmds
));
470 out_le32(&rd
->control
, (RUN
<< 16) | RUN
);
472 /* put a branch at the end of the tx command list */
473 cp
= mp
->tx_cmds
+ NCMDS_TX
* N_TX_RING
;
474 st_le16(&cp
->command
, DBDMA_NOP
+ BR_ALWAYS
);
475 st_le32(&cp
->cmd_dep
, virt_to_bus(mp
->tx_cmds
));
478 out_le32(&td
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16);
479 out_le32(&td
->cmdptr
, virt_to_bus(mp
->tx_cmds
));
487 out_8(&mb
->maccc
, mp
->maccc
);
488 /* enable all interrupts except receive interrupts */
489 out_8(&mb
->imr
, RCVINT
);
494 static int mace_close(struct net_device
*dev
)
496 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
497 volatile struct mace __iomem
*mb
= mp
->mace
;
498 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
499 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
501 /* disable rx and tx */
502 out_8(&mb
->maccc
, 0);
503 out_8(&mb
->imr
, 0xff); /* disable all intrs */
505 /* disable rx and tx dma */
506 st_le32(&rd
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16); /* clear run bit */
507 st_le32(&td
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16); /* clear run bit */
509 mace_clean_rings(mp
);
514 static inline void mace_set_timeout(struct net_device
*dev
)
516 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
518 if (mp
->timeout_active
)
519 del_timer(&mp
->tx_timeout
);
520 mp
->tx_timeout
.expires
= jiffies
+ TX_TIMEOUT
;
521 mp
->tx_timeout
.function
= mace_tx_timeout
;
522 mp
->tx_timeout
.data
= (unsigned long) dev
;
523 add_timer(&mp
->tx_timeout
);
524 mp
->timeout_active
= 1;
527 static int mace_xmit_start(struct sk_buff
*skb
, struct net_device
*dev
)
529 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
530 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
531 volatile struct dbdma_cmd
*cp
, *np
;
535 /* see if there's a free slot in the tx ring */
536 spin_lock_irqsave(&mp
->lock
, flags
);
539 if (next
>= N_TX_RING
)
541 if (next
== mp
->tx_empty
) {
542 netif_stop_queue(dev
);
544 spin_unlock_irqrestore(&mp
->lock
, flags
);
545 return 1; /* can't take it at the moment */
547 spin_unlock_irqrestore(&mp
->lock
, flags
);
549 /* partially fill in the dma command block */
551 if (len
> ETH_FRAME_LEN
) {
552 printk(KERN_DEBUG
"mace: xmit frame too long (%d)\n", len
);
555 mp
->tx_bufs
[fill
] = skb
;
556 cp
= mp
->tx_cmds
+ NCMDS_TX
* fill
;
557 st_le16(&cp
->req_count
, len
);
558 st_le32(&cp
->phy_addr
, virt_to_bus(skb
->data
));
560 np
= mp
->tx_cmds
+ NCMDS_TX
* next
;
561 out_le16(&np
->command
, DBDMA_STOP
);
563 /* poke the tx dma channel */
564 spin_lock_irqsave(&mp
->lock
, flags
);
566 if (!mp
->tx_bad_runt
&& mp
->tx_active
< MAX_TX_ACTIVE
) {
567 out_le16(&cp
->xfer_status
, 0);
568 out_le16(&cp
->command
, OUTPUT_LAST
);
569 out_le32(&td
->control
, ((RUN
|WAKE
) << 16) + (RUN
|WAKE
));
571 mace_set_timeout(dev
);
573 if (++next
>= N_TX_RING
)
575 if (next
== mp
->tx_empty
)
576 netif_stop_queue(dev
);
577 spin_unlock_irqrestore(&mp
->lock
, flags
);
582 static void mace_set_multicast(struct net_device
*dev
)
584 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
585 volatile struct mace __iomem
*mb
= mp
->mace
;
590 spin_lock_irqsave(&mp
->lock
, flags
);
592 if (dev
->flags
& IFF_PROMISC
) {
595 unsigned char multicast_filter
[8];
596 struct dev_mc_list
*dmi
= dev
->mc_list
;
598 if (dev
->flags
& IFF_ALLMULTI
) {
599 for (i
= 0; i
< 8; i
++)
600 multicast_filter
[i
] = 0xff;
602 for (i
= 0; i
< 8; i
++)
603 multicast_filter
[i
] = 0;
604 for (i
= 0; i
< dev
->mc_count
; i
++) {
605 crc
= ether_crc_le(6, dmi
->dmi_addr
);
606 j
= crc
>> 26; /* bit number in multicast_filter */
607 multicast_filter
[j
>> 3] |= 1 << (j
& 7);
612 printk("Multicast filter :");
613 for (i
= 0; i
< 8; i
++)
614 printk("%02x ", multicast_filter
[i
]);
618 if (mp
->chipid
== BROKEN_ADDRCHG_REV
)
619 out_8(&mb
->iac
, LOGADDR
);
621 out_8(&mb
->iac
, ADDRCHG
| LOGADDR
);
622 while ((in_8(&mb
->iac
) & ADDRCHG
) != 0)
625 for (i
= 0; i
< 8; ++i
)
626 out_8(&mb
->ladrf
, multicast_filter
[i
]);
627 if (mp
->chipid
!= BROKEN_ADDRCHG_REV
)
631 out_8(&mb
->maccc
, mp
->maccc
);
632 spin_unlock_irqrestore(&mp
->lock
, flags
);
635 static void mace_handle_misc_intrs(struct mace_data
*mp
, int intr
, struct net_device
*dev
)
637 volatile struct mace __iomem
*mb
= mp
->mace
;
638 static int mace_babbles
, mace_jabbers
;
641 dev
->stats
.rx_missed_errors
+= 256;
642 dev
->stats
.rx_missed_errors
+= in_8(&mb
->mpc
); /* reading clears it */
644 dev
->stats
.rx_length_errors
+= 256;
645 dev
->stats
.rx_length_errors
+= in_8(&mb
->rntpc
); /* reading clears it */
647 ++dev
->stats
.tx_heartbeat_errors
;
649 if (mace_babbles
++ < 4)
650 printk(KERN_DEBUG
"mace: babbling transmitter\n");
652 if (mace_jabbers
++ < 4)
653 printk(KERN_DEBUG
"mace: jabbering transceiver\n");
656 static irqreturn_t
mace_interrupt(int irq
, void *dev_id
)
658 struct net_device
*dev
= (struct net_device
*) dev_id
;
659 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
660 volatile struct mace __iomem
*mb
= mp
->mace
;
661 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
662 volatile struct dbdma_cmd
*cp
;
663 int intr
, fs
, i
, stat
, x
;
666 /* static int mace_last_fs, mace_last_xcount; */
668 spin_lock_irqsave(&mp
->lock
, flags
);
669 intr
= in_8(&mb
->ir
); /* read interrupt register */
670 in_8(&mb
->xmtrc
); /* get retries */
671 mace_handle_misc_intrs(mp
, intr
, dev
);
674 while (in_8(&mb
->pr
) & XMTSV
) {
675 del_timer(&mp
->tx_timeout
);
676 mp
->timeout_active
= 0;
678 * Clear any interrupt indication associated with this status
679 * word. This appears to unlatch any error indication from
680 * the DMA controller.
682 intr
= in_8(&mb
->ir
);
684 mace_handle_misc_intrs(mp
, intr
, dev
);
685 if (mp
->tx_bad_runt
) {
686 fs
= in_8(&mb
->xmtfs
);
688 out_8(&mb
->xmtfc
, AUTO_PAD_XMIT
);
691 dstat
= ld_le32(&td
->status
);
692 /* stop DMA controller */
693 out_le32(&td
->control
, RUN
<< 16);
695 * xcount is the number of complete frames which have been
696 * written to the fifo but for which status has not been read.
698 xcount
= (in_8(&mb
->fifofc
) >> XMTFC_SH
) & XMTFC_MASK
;
699 if (xcount
== 0 || (dstat
& DEAD
)) {
701 * If a packet was aborted before the DMA controller has
702 * finished transferring it, it seems that there are 2 bytes
703 * which are stuck in some buffer somewhere. These will get
704 * transmitted as soon as we read the frame status (which
705 * reenables the transmit data transfer request). Turning
706 * off the DMA controller and/or resetting the MACE doesn't
707 * help. So we disable auto-padding and FCS transmission
708 * so the two bytes will only be a runt packet which should
709 * be ignored by other stations.
711 out_8(&mb
->xmtfc
, DXMTFCS
);
713 fs
= in_8(&mb
->xmtfs
);
714 if ((fs
& XMTSV
) == 0) {
715 printk(KERN_ERR
"mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n",
719 * XXX mace likes to hang the machine after a xmtfs error.
720 * This is hard to reproduce, reseting *may* help
723 cp
= mp
->tx_cmds
+ NCMDS_TX
* i
;
724 stat
= ld_le16(&cp
->xfer_status
);
725 if ((fs
& (UFLO
|LCOL
|LCAR
|RTRY
)) || (dstat
& DEAD
) || xcount
== 0) {
727 * Check whether there were in fact 2 bytes written to
731 x
= (in_8(&mb
->fifofc
) >> XMTFC_SH
) & XMTFC_MASK
;
733 /* there were two bytes with an end-of-packet indication */
735 mace_set_timeout(dev
);
738 * Either there weren't the two bytes buffered up, or they
739 * didn't have an end-of-packet indication.
740 * We flush the transmit FIFO just in case (by setting the
741 * XMTFWU bit with the transmitter disabled).
743 out_8(&mb
->maccc
, in_8(&mb
->maccc
) & ~ENXMT
);
744 out_8(&mb
->fifocc
, in_8(&mb
->fifocc
) | XMTFWU
);
746 out_8(&mb
->maccc
, in_8(&mb
->maccc
) | ENXMT
);
747 out_8(&mb
->xmtfc
, AUTO_PAD_XMIT
);
750 /* dma should have finished */
751 if (i
== mp
->tx_fill
) {
752 printk(KERN_DEBUG
"mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n",
757 if (fs
& (UFLO
|LCOL
|LCAR
|RTRY
)) {
758 ++dev
->stats
.tx_errors
;
760 ++dev
->stats
.tx_carrier_errors
;
761 if (fs
& (UFLO
|LCOL
|RTRY
))
762 ++dev
->stats
.tx_aborted_errors
;
764 dev
->stats
.tx_bytes
+= mp
->tx_bufs
[i
]->len
;
765 ++dev
->stats
.tx_packets
;
767 dev_kfree_skb_irq(mp
->tx_bufs
[i
]);
769 if (++i
>= N_TX_RING
)
773 mace_last_xcount
= xcount
;
777 if (i
!= mp
->tx_empty
) {
779 netif_wake_queue(dev
);
785 if (!mp
->tx_bad_runt
&& i
!= mp
->tx_fill
&& mp
->tx_active
< MAX_TX_ACTIVE
) {
787 /* set up the next one */
788 cp
= mp
->tx_cmds
+ NCMDS_TX
* i
;
789 out_le16(&cp
->xfer_status
, 0);
790 out_le16(&cp
->command
, OUTPUT_LAST
);
792 if (++i
>= N_TX_RING
)
794 } while (i
!= mp
->tx_fill
&& mp
->tx_active
< MAX_TX_ACTIVE
);
795 out_le32(&td
->control
, ((RUN
|WAKE
) << 16) + (RUN
|WAKE
));
796 mace_set_timeout(dev
);
798 spin_unlock_irqrestore(&mp
->lock
, flags
);
802 static void mace_tx_timeout(unsigned long data
)
804 struct net_device
*dev
= (struct net_device
*) data
;
805 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
806 volatile struct mace __iomem
*mb
= mp
->mace
;
807 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
808 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
809 volatile struct dbdma_cmd
*cp
;
813 spin_lock_irqsave(&mp
->lock
, flags
);
814 mp
->timeout_active
= 0;
815 if (mp
->tx_active
== 0 && !mp
->tx_bad_runt
)
818 /* update various counters */
819 mace_handle_misc_intrs(mp
, in_8(&mb
->ir
), dev
);
821 cp
= mp
->tx_cmds
+ NCMDS_TX
* mp
->tx_empty
;
823 /* turn off both tx and rx and reset the chip */
824 out_8(&mb
->maccc
, 0);
825 printk(KERN_ERR
"mace: transmit timeout - resetting\n");
830 cp
= bus_to_virt(ld_le32(&rd
->cmdptr
));
832 out_le16(&cp
->xfer_status
, 0);
833 out_le32(&rd
->cmdptr
, virt_to_bus(cp
));
834 out_le32(&rd
->control
, (RUN
<< 16) | RUN
);
836 /* fix up the transmit side */
839 ++dev
->stats
.tx_errors
;
840 if (mp
->tx_bad_runt
) {
842 } else if (i
!= mp
->tx_fill
) {
843 dev_kfree_skb(mp
->tx_bufs
[i
]);
844 if (++i
>= N_TX_RING
)
849 netif_wake_queue(dev
);
850 if (i
!= mp
->tx_fill
) {
851 cp
= mp
->tx_cmds
+ NCMDS_TX
* i
;
852 out_le16(&cp
->xfer_status
, 0);
853 out_le16(&cp
->command
, OUTPUT_LAST
);
854 out_le32(&td
->cmdptr
, virt_to_bus(cp
));
855 out_le32(&td
->control
, (RUN
<< 16) | RUN
);
857 mace_set_timeout(dev
);
860 /* turn it back on */
861 out_8(&mb
->imr
, RCVINT
);
862 out_8(&mb
->maccc
, mp
->maccc
);
865 spin_unlock_irqrestore(&mp
->lock
, flags
);
868 static irqreturn_t
mace_txdma_intr(int irq
, void *dev_id
)
873 static irqreturn_t
mace_rxdma_intr(int irq
, void *dev_id
)
875 struct net_device
*dev
= (struct net_device
*) dev_id
;
876 struct mace_data
*mp
= (struct mace_data
*) dev
->priv
;
877 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
878 volatile struct dbdma_cmd
*cp
, *np
;
879 int i
, nb
, stat
, next
;
881 unsigned frame_status
;
882 static int mace_lost_status
;
886 spin_lock_irqsave(&mp
->lock
, flags
);
887 for (i
= mp
->rx_empty
; i
!= mp
->rx_fill
; ) {
888 cp
= mp
->rx_cmds
+ i
;
889 stat
= ld_le16(&cp
->xfer_status
);
890 if ((stat
& ACTIVE
) == 0) {
892 if (next
>= N_RX_RING
)
894 np
= mp
->rx_cmds
+ next
;
895 if (next
!= mp
->rx_fill
896 && (ld_le16(&np
->xfer_status
) & ACTIVE
) != 0) {
897 printk(KERN_DEBUG
"mace: lost a status word\n");
902 nb
= ld_le16(&cp
->req_count
) - ld_le16(&cp
->res_count
);
903 out_le16(&cp
->command
, DBDMA_STOP
);
904 /* got a packet, have a look at it */
905 skb
= mp
->rx_bufs
[i
];
907 ++dev
->stats
.rx_dropped
;
910 frame_status
= (data
[nb
-3] << 8) + data
[nb
-4];
911 if (frame_status
& (RS_OFLO
|RS_CLSN
|RS_FRAMERR
|RS_FCSERR
)) {
912 ++dev
->stats
.rx_errors
;
913 if (frame_status
& RS_OFLO
)
914 ++dev
->stats
.rx_over_errors
;
915 if (frame_status
& RS_FRAMERR
)
916 ++dev
->stats
.rx_frame_errors
;
917 if (frame_status
& RS_FCSERR
)
918 ++dev
->stats
.rx_crc_errors
;
920 /* Mace feature AUTO_STRIP_RCV is on by default, dropping the
921 * FCS on frames with 802.3 headers. This means that Ethernet
922 * frames have 8 extra octets at the end, while 802.3 frames
923 * have only 4. We need to correctly account for this. */
924 if (*(unsigned short *)(data
+12) < 1536) /* 802.3 header */
926 else /* Ethernet header; mace includes FCS */
929 skb
->protocol
= eth_type_trans(skb
, dev
);
930 dev
->stats
.rx_bytes
+= skb
->len
;
932 dev
->last_rx
= jiffies
;
933 mp
->rx_bufs
[i
] = NULL
;
934 ++dev
->stats
.rx_packets
;
937 ++dev
->stats
.rx_errors
;
938 ++dev
->stats
.rx_length_errors
;
941 /* advance to next */
942 if (++i
>= N_RX_RING
)
950 if (next
>= N_RX_RING
)
952 if (next
== mp
->rx_empty
)
954 cp
= mp
->rx_cmds
+ i
;
955 skb
= mp
->rx_bufs
[i
];
957 skb
= dev_alloc_skb(RX_BUFLEN
+ 2);
960 mp
->rx_bufs
[i
] = skb
;
963 st_le16(&cp
->req_count
, RX_BUFLEN
);
964 data
= skb
? skb
->data
: dummy_buf
;
965 st_le32(&cp
->phy_addr
, virt_to_bus(data
));
966 out_le16(&cp
->xfer_status
, 0);
967 out_le16(&cp
->command
, INPUT_LAST
+ INTR_ALWAYS
);
969 if ((ld_le32(&rd
->status
) & ACTIVE
) != 0) {
970 out_le32(&rd
->control
, (PAUSE
<< 16) | PAUSE
);
971 while ((in_le32(&rd
->status
) & ACTIVE
) != 0)
977 if (i
!= mp
->rx_fill
) {
978 out_le32(&rd
->control
, ((RUN
|WAKE
) << 16) | (RUN
|WAKE
));
981 spin_unlock_irqrestore(&mp
->lock
, flags
);
985 static struct of_device_id mace_match
[] =
992 MODULE_DEVICE_TABLE (of
, mace_match
);
994 static struct macio_driver mace_driver
=
997 .match_table
= mace_match
,
999 .remove
= mace_remove
,
1003 static int __init
mace_init(void)
1005 return macio_register_driver(&mace_driver
);
1008 static void __exit
mace_cleanup(void)
1010 macio_unregister_driver(&mace_driver
);
1016 MODULE_AUTHOR("Paul Mackerras");
1017 MODULE_DESCRIPTION("PowerMac MACE driver.");
1018 module_param(port_aaui
, int, 0);
1019 MODULE_PARM_DESC(port_aaui
, "MACE uses AAUI port (0-1)");
1020 MODULE_LICENSE("GPL");
1022 module_init(mace_init
);
1023 module_exit(mace_cleanup
);