2 ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
4 Christian W. Zuckschwerdt <zany@triq.net> 2000-11-23
5 based on lm75.c by Frodo Looijaard <frodol@dds.nl>
6 Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
7 the help of Jean Delvare <khali@linux-fr.org>
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/i2c.h>
29 #include <linux/hwmon.h>
30 #include <linux/hwmon-sysfs.h>
31 #include <linux/err.h>
32 #include <linux/mutex.h>
33 #include <linux/sysfs.h>
36 /* Addresses to scan */
37 static const unsigned short normal_i2c
[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
38 0x4d, 0x4e, 0x4f, I2C_CLIENT_END
};
40 /* Insmod parameters */
41 static int polarity
= -1;
42 module_param(polarity
, int, 0);
43 MODULE_PARM_DESC(polarity
, "Output's polarity: 0 = active high, 1 = active low");
45 /* Many DS1621 constants specified below */
46 /* Config register used for detection */
48 /* |Done|THF |TLF |NVB | X | X |POL |1SHOT| */
49 #define DS1621_REG_CONFIG_NVB 0x10
50 #define DS1621_REG_CONFIG_POLARITY 0x02
51 #define DS1621_REG_CONFIG_1SHOT 0x01
52 #define DS1621_REG_CONFIG_DONE 0x80
54 /* The DS1621 registers */
55 static const u8 DS1621_REG_TEMP
[3] = {
56 0xAA, /* input, word, RO */
57 0xA2, /* min, word, RW */
58 0xA1, /* max, word, RW */
60 #define DS1621_REG_CONF 0xAC /* byte, RW */
61 #define DS1621_COM_START 0xEE /* no data */
62 #define DS1621_COM_STOP 0x22 /* no data */
64 /* The DS1621 configuration register */
65 #define DS1621_ALARM_TEMP_HIGH 0x40
66 #define DS1621_ALARM_TEMP_LOW 0x20
69 #define ALARMS_FROM_REG(val) ((val) & \
70 (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
72 /* Each client has this additional data */
74 struct device
*hwmon_dev
;
75 struct mutex update_lock
;
76 char valid
; /* !=0 if following fields are valid */
77 unsigned long last_updated
; /* In jiffies */
79 u16 temp
[3]; /* Register values, word */
80 u8 conf
; /* Register encoding, combined */
83 /* Temperature registers are word-sized.
84 DS1621 uses a high-byte first convention, which is exactly opposite to
85 the SMBus standard. */
86 static int ds1621_read_temp(struct i2c_client
*client
, u8 reg
)
90 ret
= i2c_smbus_read_word_data(client
, reg
);
96 static int ds1621_write_temp(struct i2c_client
*client
, u8 reg
, u16 value
)
98 return i2c_smbus_write_word_data(client
, reg
, swab16(value
));
101 static void ds1621_init_client(struct i2c_client
*client
)
105 new_conf
= conf
= i2c_smbus_read_byte_data(client
, DS1621_REG_CONF
);
106 /* switch to continuous conversion mode */
107 new_conf
&= ~DS1621_REG_CONFIG_1SHOT
;
109 /* setup output polarity */
111 new_conf
&= ~DS1621_REG_CONFIG_POLARITY
;
112 else if (polarity
== 1)
113 new_conf
|= DS1621_REG_CONFIG_POLARITY
;
115 if (conf
!= new_conf
)
116 i2c_smbus_write_byte_data(client
, DS1621_REG_CONF
, new_conf
);
118 /* start conversion */
119 i2c_smbus_write_byte(client
, DS1621_COM_START
);
122 static struct ds1621_data
*ds1621_update_client(struct device
*dev
)
124 struct i2c_client
*client
= to_i2c_client(dev
);
125 struct ds1621_data
*data
= i2c_get_clientdata(client
);
128 mutex_lock(&data
->update_lock
);
130 if (time_after(jiffies
, data
->last_updated
+ HZ
+ HZ
/ 2)
134 dev_dbg(&client
->dev
, "Starting ds1621 update\n");
136 data
->conf
= i2c_smbus_read_byte_data(client
, DS1621_REG_CONF
);
138 for (i
= 0; i
< ARRAY_SIZE(data
->temp
); i
++)
139 data
->temp
[i
] = ds1621_read_temp(client
,
142 /* reset alarms if necessary */
143 new_conf
= data
->conf
;
144 if (data
->temp
[0] > data
->temp
[1]) /* input > min */
145 new_conf
&= ~DS1621_ALARM_TEMP_LOW
;
146 if (data
->temp
[0] < data
->temp
[2]) /* input < max */
147 new_conf
&= ~DS1621_ALARM_TEMP_HIGH
;
148 if (data
->conf
!= new_conf
)
149 i2c_smbus_write_byte_data(client
, DS1621_REG_CONF
,
152 data
->last_updated
= jiffies
;
156 mutex_unlock(&data
->update_lock
);
161 static ssize_t
show_temp(struct device
*dev
, struct device_attribute
*da
,
164 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
165 struct ds1621_data
*data
= ds1621_update_client(dev
);
166 return sprintf(buf
, "%d\n",
167 LM75_TEMP_FROM_REG(data
->temp
[attr
->index
]));
170 static ssize_t
set_temp(struct device
*dev
, struct device_attribute
*da
,
171 const char *buf
, size_t count
)
173 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
174 struct i2c_client
*client
= to_i2c_client(dev
);
175 struct ds1621_data
*data
= i2c_get_clientdata(client
);
176 u16 val
= LM75_TEMP_TO_REG(simple_strtol(buf
, NULL
, 10));
178 mutex_lock(&data
->update_lock
);
179 data
->temp
[attr
->index
] = val
;
180 ds1621_write_temp(client
, DS1621_REG_TEMP
[attr
->index
],
181 data
->temp
[attr
->index
]);
182 mutex_unlock(&data
->update_lock
);
186 static ssize_t
show_alarms(struct device
*dev
, struct device_attribute
*da
,
189 struct ds1621_data
*data
= ds1621_update_client(dev
);
190 return sprintf(buf
, "%d\n", ALARMS_FROM_REG(data
->conf
));
193 static ssize_t
show_alarm(struct device
*dev
, struct device_attribute
*da
,
196 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
197 struct ds1621_data
*data
= ds1621_update_client(dev
);
198 return sprintf(buf
, "%d\n", !!(data
->conf
& attr
->index
));
201 static DEVICE_ATTR(alarms
, S_IRUGO
, show_alarms
, NULL
);
202 static SENSOR_DEVICE_ATTR(temp1_input
, S_IRUGO
, show_temp
, NULL
, 0);
203 static SENSOR_DEVICE_ATTR(temp1_min
, S_IWUSR
| S_IRUGO
, show_temp
, set_temp
, 1);
204 static SENSOR_DEVICE_ATTR(temp1_max
, S_IWUSR
| S_IRUGO
, show_temp
, set_temp
, 2);
205 static SENSOR_DEVICE_ATTR(temp1_min_alarm
, S_IRUGO
, show_alarm
, NULL
,
206 DS1621_ALARM_TEMP_LOW
);
207 static SENSOR_DEVICE_ATTR(temp1_max_alarm
, S_IRUGO
, show_alarm
, NULL
,
208 DS1621_ALARM_TEMP_HIGH
);
210 static struct attribute
*ds1621_attributes
[] = {
211 &sensor_dev_attr_temp1_input
.dev_attr
.attr
,
212 &sensor_dev_attr_temp1_min
.dev_attr
.attr
,
213 &sensor_dev_attr_temp1_max
.dev_attr
.attr
,
214 &sensor_dev_attr_temp1_min_alarm
.dev_attr
.attr
,
215 &sensor_dev_attr_temp1_max_alarm
.dev_attr
.attr
,
216 &dev_attr_alarms
.attr
,
220 static const struct attribute_group ds1621_group
= {
221 .attrs
= ds1621_attributes
,
225 /* Return 0 if detection is successful, -ENODEV otherwise */
226 static int ds1621_detect(struct i2c_client
*client
,
227 struct i2c_board_info
*info
)
229 struct i2c_adapter
*adapter
= client
->adapter
;
233 if (!i2c_check_functionality(adapter
, I2C_FUNC_SMBUS_BYTE_DATA
234 | I2C_FUNC_SMBUS_WORD_DATA
235 | I2C_FUNC_SMBUS_WRITE_BYTE
))
238 /* Now, we do the remaining detection. It is lousy. */
239 /* The NVB bit should be low if no EEPROM write has been requested
240 during the latest 10ms, which is highly improbable in our case. */
241 conf
= i2c_smbus_read_byte_data(client
, DS1621_REG_CONF
);
242 if (conf
< 0 || conf
& DS1621_REG_CONFIG_NVB
)
244 /* The 7 lowest bits of a temperature should always be 0. */
245 for (i
= 0; i
< ARRAY_SIZE(DS1621_REG_TEMP
); i
++) {
246 temp
= i2c_smbus_read_word_data(client
, DS1621_REG_TEMP
[i
]);
247 if (temp
< 0 || (temp
& 0x7f00))
251 strlcpy(info
->type
, "ds1621", I2C_NAME_SIZE
);
256 static int ds1621_probe(struct i2c_client
*client
,
257 const struct i2c_device_id
*id
)
259 struct ds1621_data
*data
;
262 data
= kzalloc(sizeof(struct ds1621_data
), GFP_KERNEL
);
268 i2c_set_clientdata(client
, data
);
269 mutex_init(&data
->update_lock
);
271 /* Initialize the DS1621 chip */
272 ds1621_init_client(client
);
274 /* Register sysfs hooks */
275 if ((err
= sysfs_create_group(&client
->dev
.kobj
, &ds1621_group
)))
278 data
->hwmon_dev
= hwmon_device_register(&client
->dev
);
279 if (IS_ERR(data
->hwmon_dev
)) {
280 err
= PTR_ERR(data
->hwmon_dev
);
281 goto exit_remove_files
;
287 sysfs_remove_group(&client
->dev
.kobj
, &ds1621_group
);
294 static int ds1621_remove(struct i2c_client
*client
)
296 struct ds1621_data
*data
= i2c_get_clientdata(client
);
298 hwmon_device_unregister(data
->hwmon_dev
);
299 sysfs_remove_group(&client
->dev
.kobj
, &ds1621_group
);
306 static const struct i2c_device_id ds1621_id
[] = {
311 MODULE_DEVICE_TABLE(i2c
, ds1621_id
);
313 /* This is the driver that will be inserted */
314 static struct i2c_driver ds1621_driver
= {
315 .class = I2C_CLASS_HWMON
,
319 .probe
= ds1621_probe
,
320 .remove
= ds1621_remove
,
321 .id_table
= ds1621_id
,
322 .detect
= ds1621_detect
,
323 .address_list
= normal_i2c
,
326 static int __init
ds1621_init(void)
328 return i2c_add_driver(&ds1621_driver
);
331 static void __exit
ds1621_exit(void)
333 i2c_del_driver(&ds1621_driver
);
337 MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
338 MODULE_DESCRIPTION("DS1621 driver");
339 MODULE_LICENSE("GPL");
341 module_init(ds1621_init
);
342 module_exit(ds1621_exit
);