?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
tiocmset: kill the file pointer argument
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / staging / serqt_usb2 / serqt_usb2.c
blob39776c1cf10f7e1f3dd219b05f33accf5befc07f
1 /*
2 * This code was developed for the Quatech USB line for linux, it used
3 * much of the code developed by Greg Kroah-Hartman for USB serial devices
4 *
5 */
6
7 #include <linux/errno.h>
8 #include <linux/init.h>
9 #include <linux/slab.h>
10 #include <linux/tty.h>
11 #include <linux/tty_driver.h>
12 #include <linux/tty_flip.h>
13 #include <linux/module.h>
14 #include <linux/serial.h>
15 #include <linux/usb.h>
16 #include <linux/usb/serial.h>
17 #include <linux/uaccess.h>
18
19 static int debug;
20
21 /* Version Information */
22 #define DRIVER_VERSION "v2.14"
23 #define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc"
24 #define DRIVER_DESC "Quatech USB to Serial Driver"
25
26 #define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */
27 #define QUATECH_SSU100 0xC020 /* SSU100 */
28 #define QUATECH_SSU200 0xC030 /* SSU200 */
29 #define QUATECH_DSU100 0xC040 /* DSU100 */
30 #define QUATECH_DSU200 0xC050 /* DSU200 */
31 #define QUATECH_QSU100 0xC060 /* QSU100 */
32 #define QUATECH_QSU200 0xC070 /* QSU200 */
33 #define QUATECH_ESU100A 0xC080 /* ESU100A */
34 #define QUATECH_ESU100B 0xC081 /* ESU100B */
35 #define QUATECH_ESU200A 0xC0A0 /* ESU200A */
36 #define QUATECH_ESU200B 0xC0A1 /* ESU200B */
37 #define QUATECH_HSU100A 0xC090 /* HSU100A */
38 #define QUATECH_HSU100B 0xC091 /* HSU100B */
39 #define QUATECH_HSU100C 0xC092 /* HSU100C */
40 #define QUATECH_HSU100D 0xC093 /* HSU100D */
41 #define QUATECH_HSU200A 0xC0B0 /* HSU200A */
42 #define QUATECH_HSU200B 0xC0B1 /* HSU200B */
43 #define QUATECH_HSU200C 0xC0B2 /* HSU200C */
44 #define QUATECH_HSU200D 0xC0B3 /* HSU200D */
45 #define QUATECH_SSU100_2 0xC120 /* SSU100_2 */
46 #define QUATECH_DSU100_2 0xC140 /* DSU100_2 */
47 #define QUATECH_DSU400_2 0xC150 /* DSU400_2 */
48 #define QUATECH_QSU100_2 0xC160 /* QSU100_2 */
49 #define QUATECH_QSU400_2 0xC170 /* QSU400_2 */
50 #define QUATECH_ESU400_2 0xC180 /* ESU400_2 */
51 #define QUATECH_ESU100_2 0xC1A0 /* ESU100_2 */
52
53 #define QT_SET_GET_DEVICE 0xc2
54 #define QT_OPEN_CLOSE_CHANNEL 0xca
55 #define QT_GET_SET_PREBUF_TRIG_LVL 0xcc
56 #define QT_SET_ATF 0xcd
57 #define QT_GET_SET_REGISTER 0xc0
58 #define QT_GET_SET_UART 0xc1
59 #define QT_HW_FLOW_CONTROL_MASK 0xc5
60 #define QT_SW_FLOW_CONTROL_MASK 0xc6
61 #define QT_SW_FLOW_CONTROL_DISABLE 0xc7
62 #define QT_BREAK_CONTROL 0xc8
63
64 #define USBD_TRANSFER_DIRECTION_IN 0xc0
65 #define USBD_TRANSFER_DIRECTION_OUT 0x40
66
67 #define MAX_BAUD_RATE 460800
68 #define MAX_BAUD_REMAINDER 4608
69
70 #define DIV_LATCH_LS 0x00
71 #define XMT_HOLD_REGISTER 0x00
72 #define XVR_BUFFER_REGISTER 0x00
73 #define DIV_LATCH_MS 0x01
74 #define FIFO_CONTROL_REGISTER 0x02
75 #define LINE_CONTROL_REGISTER 0x03
76 #define MODEM_CONTROL_REGISTER 0x04
77 #define LINE_STATUS_REGISTER 0x05
78 #define MODEM_STATUS_REGISTER 0x06
79
80 #define SERIAL_MCR_DTR 0x01
81 #define SERIAL_MCR_RTS 0x02
82 #define SERIAL_MCR_LOOP 0x10
83
84 #define SERIAL_MSR_CTS 0x10
85 #define SERIAL_MSR_CD 0x80
86 #define SERIAL_MSR_RI 0x40
87 #define SERIAL_MSR_DSR 0x20
88 #define SERIAL_MSR_MASK 0xf0
89
90 #define SERIAL_8_DATA 0x03
91 #define SERIAL_7_DATA 0x02
92 #define SERIAL_6_DATA 0x01
93 #define SERIAL_5_DATA 0x00
94
95 #define SERIAL_ODD_PARITY 0X08
96 #define SERIAL_EVEN_PARITY 0X18
97 #define SERIAL_TWO_STOPB 0x04
98 #define SERIAL_ONE_STOPB 0x00
99
100 #define DEFAULT_DIVISOR 0x30 /* gives 9600 baud rate */
101 #define DEFAULT_LCR SERIAL_8_DATA /* 8, none , 1 */
102
103 #define FULLPWRBIT 0x00000080
104 #define NEXT_BOARD_POWER_BIT 0x00000004
105
106 #define SERIAL_LSR_OE 0x02
107 #define SERIAL_LSR_PE 0x04
108 #define SERIAL_LSR_FE 0x08
109 #define SERIAL_LSR_BI 0x10
110
111 #define SERIAL_MSR_CTS 0x10
112 #define SERIAL_MSR_CD 0x80
113 #define SERIAL_MSR_RI 0x40
114 #define SERIAL_MSR_DSR 0x20
115 #define SERIAL_MSR_MASK 0xf0
116
117 #define PREFUFF_LEVEL_CONSERVATIVE 128
118 #define ATC_DISABLED 0x0
119
120 #define RR_BITS 0x03 /* for clearing clock bits */
121 #define DUPMODE_BITS 0xc0
122 #define CLKS_X4 0x02
123
124 #define LOOPMODE_BITS 0x41 /* LOOP1 = b6, LOOP0 = b0 (PORT B) */
125 #define ALL_LOOPBACK 0x01
126 #define MODEM_CTRL 0x40
127 #define RS232_MODE 0x00
128
129 static const struct usb_device_id serqt_id_table[] = {
130 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
131 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU200)},
132 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100)},
133 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU200)},
134 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU100)},
135 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU200)},
136 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100A)},
137 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100B)},
138 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU200A)},
139 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU200B)},
140 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100A)},
141 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100B)},
142 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100C)},
143 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100D)},
144 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200A)},
145 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200B)},
146 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200C)},
147 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200D)},
148 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100_2)},
149 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100_2)},
150 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU400_2)},
151 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU100_2)},
152 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU400_2)},
153 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU400_2)},
154 {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100_2)},
155 {} /* Terminating entry */
156 };
157
158 MODULE_DEVICE_TABLE(usb, serqt_id_table);
159
160 struct qt_get_device_data {
161 __u8 porta;
162 __u8 portb;
163 __u8 portc;
164 };
165
166 struct qt_open_channel_data {
167 __u8 line_status;
168 __u8 modem_status;
169 };
170
171 struct quatech_port {
172 int port_num; /* number of the port */
173 struct urb *write_urb; /* write URB for this port */
174 struct urb *read_urb; /* read URB for this port */
175 struct urb *int_urb;
176
177 __u8 shadowLCR; /* last LCR value received */
178 __u8 shadowMCR; /* last MCR value received */
179 __u8 shadowMSR; /* last MSR value received */
180 __u8 shadowLSR; /* last LSR value received */
181 char open_ports;
182
183 /* Used for TIOCMIWAIT */
184 wait_queue_head_t msr_wait;
185 char prev_status, diff_status;
186
187 wait_queue_head_t wait;
188
189 struct async_icount icount;
190
191 struct usb_serial_port *port; /* owner of this object */
192 struct qt_get_device_data DeviceData;
193 spinlock_t lock;
194 bool read_urb_busy;
195 int RxHolding;
196 int ReadBulkStopped;
197 char closePending;
198 };
199
200 static struct usb_driver serqt_usb_driver = {
201 .name = "quatech-usb-serial",
202 .probe = usb_serial_probe,
203 .disconnect = usb_serial_disconnect,
204 .id_table = serqt_id_table,
205 .no_dynamic_id = 1,
206 };
207
208 static int port_paranoia_check(struct usb_serial_port *port,
209 const char *function)
210 {
211 if (!port) {
212 dbg("%s - port == NULL", function);
213 return -1;
214 }
215 if (!port->serial) {
216 dbg("%s - port->serial == NULL\n", function);
217 return -1;
218 }
219
220 return 0;
221 }
222
223 static int serial_paranoia_check(struct usb_serial *serial,
224 const char *function)
225 {
226 if (!serial) {
227 dbg("%s - serial == NULL\n", function);
228 return -1;
229 }
230
231 if (!serial->type) {
232 dbg("%s - serial->type == NULL!", function);
233 return -1;
234 }
235
236 return 0;
237 }
238
239 static inline struct quatech_port *qt_get_port_private(struct usb_serial_port
240 *port)
241 {
242 return (struct quatech_port *)usb_get_serial_port_data(port);
243 }
244
245 static inline void qt_set_port_private(struct usb_serial_port *port,
246 struct quatech_port *data)
247 {
248 usb_set_serial_port_data(port, (void *)data);
249 }
250
251 static struct usb_serial *get_usb_serial(struct usb_serial_port *port,
252 const char *function)
253 {
254 /* if no port was specified, or it fails a paranoia check */
255 if (!port ||
256 port_paranoia_check(port, function) ||
257 serial_paranoia_check(port->serial, function)) {
258 /*
259 * then say that we dont have a valid usb_serial thing,
260 * which will end up genrating -ENODEV return values
261 */
262 return NULL;
263 }
264
265 return port->serial;
266 }
267
268 static void ProcessLineStatus(struct quatech_port *qt_port,
269 unsigned char line_status)
270 {
271
272 qt_port->shadowLSR =
273 line_status & (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE |
274 SERIAL_LSR_BI);
275 return;
276 }
277
278 static void ProcessModemStatus(struct quatech_port *qt_port,
279 unsigned char modem_status)
280 {
281
282 qt_port->shadowMSR = modem_status;
283 wake_up_interruptible(&qt_port->wait);
284 return;
285 }
286
287 static void ProcessRxChar(struct tty_struct *tty, struct usb_serial_port *port,
288 unsigned char data)
289 {
290 struct urb *urb = port->read_urb;
291 if (urb->actual_length)
292 tty_insert_flip_char(tty, data, TTY_NORMAL);
293 }
294
295 static void qt_write_bulk_callback(struct urb *urb)
296 {
297 struct tty_struct *tty;
298 int status;
299 struct quatech_port *quatech_port;
300
301 status = urb->status;
302
303 if (status) {
304 dbg("nonzero write bulk status received:%d\n", status);
305 return;
306 }
307
308 quatech_port = urb->context;
309
310 dbg("%s - port %d\n", __func__, quatech_port->port_num);
311
312 tty = tty_port_tty_get(&quatech_port->port->port);
313
314 if (tty)
315 tty_wakeup(tty);
316 tty_kref_put(tty);
317 }
318
319 static void qt_interrupt_callback(struct urb *urb)
320 {
321 /* FIXME */
322 }
323
324 static void qt_read_bulk_callback(struct urb *urb)
325 {
326
327 struct usb_serial_port *port = urb->context;
328 struct usb_serial *serial = get_usb_serial(port, __func__);
329 struct quatech_port *qt_port = qt_get_port_private(port);
330 unsigned char *data;
331 struct tty_struct *tty;
332 unsigned int index;
333 unsigned int RxCount;
334 int i, result;
335 int flag, flag_data;
336
337 if (urb->status) {
338 qt_port->ReadBulkStopped = 1;
339 dbg("%s - nonzero write bulk status received: %d\n",
340 __func__, urb->status);
341 return;
342 }
343
344 tty = tty_port_tty_get(&port->port);
345 if (!tty) {
346 dbg("%s - bad tty pointer - exiting", __func__);
347 return;
348 }
349
350 data = urb->transfer_buffer;
351
352 RxCount = urb->actual_length;
353
354 /* index = MINOR(port->tty->device) - serial->minor; */
355 index = tty->index - serial->minor;
356
357 dbg("%s - port %d\n", __func__, port->number);
358 dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
359
360 if (port_paranoia_check(port, __func__) != 0) {
361 dbg("%s - port_paranoia_check, exiting\n", __func__);
362 qt_port->ReadBulkStopped = 1;
363 goto exit;
364 }
365
366 if (!serial) {
367 dbg("%s - bad serial pointer, exiting\n", __func__);
368 goto exit;
369 }
370 if (qt_port->closePending == 1) {
371 /* Were closing , stop reading */
372 dbg("%s - (qt_port->closepending == 1\n", __func__);
373 qt_port->ReadBulkStopped = 1;
374 goto exit;
375 }
376
377 /*
378 * RxHolding is asserted by throttle, if we assert it, we're not
379 * receiving any more characters and let the box handle the flow
380 * control
381 */
382 if (qt_port->RxHolding == 1) {
383 qt_port->ReadBulkStopped = 1;
384 goto exit;
385 }
386
387 if (urb->status) {
388 qt_port->ReadBulkStopped = 1;
389
390 dbg("%s - nonzero read bulk status received: %d\n",
391 __func__, urb->status);
392 goto exit;
393 }
394
395 if (tty && RxCount) {
396 flag_data = 0;
397 for (i = 0; i < RxCount; ++i) {
398 /* Look ahead code here */
399 if ((i <= (RxCount - 3)) && (data[i] == 0x1b)
400 && (data[i + 1] == 0x1b)) {
401 flag = 0;
402 switch (data[i + 2]) {
403 case 0x00:
404 /* line status change 4th byte must follow */
405 if (i > (RxCount - 4)) {
406 dbg("Illegal escape seuences in received data\n");
407 break;
408 }
409 ProcessLineStatus(qt_port, data[i + 3]);
410 i += 3;
411 flag = 1;
412 break;
413
414 case 0x01:
415 /* Modem status status change 4th byte must follow */
416 dbg("Modem status status.\n");
417 if (i > (RxCount - 4)) {
418 dbg("Illegal escape sequences in received data\n");
419 break;
420 }
421 ProcessModemStatus(qt_port,
422 data[i + 3]);
423 i += 3;
424 flag = 1;
425 break;
426 case 0xff:
427 dbg("No status sequence.\n");
428
429 if (tty) {
430 ProcessRxChar(tty, port, data[i]);
431 ProcessRxChar(tty, port, data[i + 1]);
432 }
433 i += 2;
434 break;
435 }
436 if (flag == 1)
437 continue;
438 }
439
440 if (tty && urb->actual_length)
441 tty_insert_flip_char(tty, data[i], TTY_NORMAL);
442
443 }
444 tty_flip_buffer_push(tty);
445 }
446
447 /* Continue trying to always read */
448 usb_fill_bulk_urb(port->read_urb, serial->dev,
449 usb_rcvbulkpipe(serial->dev,
450 port->bulk_in_endpointAddress),
451 port->read_urb->transfer_buffer,
452 port->read_urb->transfer_buffer_length,
453 qt_read_bulk_callback, port);
454 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
455 if (result)
456 dbg("%s - failed resubmitting read urb, error %d",
457 __func__, result);
458 else {
459 if (tty && RxCount) {
460 tty_flip_buffer_push(tty);
461 tty_schedule_flip(tty);
462 }
463 }
464
465 schedule_work(&port->work);
466 exit:
467 tty_kref_put(tty);
468 }
469
470 /*
471 * qt_get_device
472 * Issue a GET_DEVICE vendor-specific request on the default control pipe If
473 * successful, fills in the qt_get_device_data structure pointed to by
474 * device_data, otherwise return a negative error number of the problem.
475 */
476
477 static int qt_get_device(struct usb_serial *serial,
478 struct qt_get_device_data *device_data)
479 {
480 int result;
481 unsigned char *transfer_buffer;
482
483 transfer_buffer =
484 kmalloc(sizeof(struct qt_get_device_data), GFP_KERNEL);
485 if (!transfer_buffer)
486 return -ENOMEM;
487
488 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
489 QT_SET_GET_DEVICE, 0xc0, 0, 0,
490 transfer_buffer,
491 sizeof(struct qt_get_device_data), 300);
492 if (result > 0)
493 memcpy(device_data, transfer_buffer,
494 sizeof(struct qt_get_device_data));
495 kfree(transfer_buffer);
496
497 return result;
498 }
499
500 /****************************************************************************
501 * BoxSetPrebufferLevel
502 TELLS BOX WHEN TO ASSERT FLOW CONTROL
503 ****************************************************************************/
504 static int BoxSetPrebufferLevel(struct usb_serial *serial)
505 {
506 int result;
507 __u16 buffer_length;
508
509 buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
510 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
511 QT_GET_SET_PREBUF_TRIG_LVL, 0x40,
512 buffer_length, 0, NULL, 0, 300);
513 return result;
514 }
515
516 /****************************************************************************
517 * BoxSetATC
518 TELLS BOX WHEN TO ASSERT automatic transmitter control
519 ****************************************************************************/
520 static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode)
521 {
522 int result;
523 __u16 buffer_length;
524
525 buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
526
527 result =
528 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
529 QT_SET_ATF, 0x40, n_Mode, 0, NULL, 0, 300);
530
531 return result;
532 }
533
534 /**
535 * qt_set_device
536 * Issue a SET_DEVICE vendor-specific request on the default control pipe If
537 * successful returns the number of bytes written, otherwise it returns a
538 * negative error number of the problem.
539 */
540 static int qt_set_device(struct usb_serial *serial,
541 struct qt_get_device_data *device_data)
542 {
543 int result;
544 __u16 length;
545 __u16 PortSettings;
546
547 PortSettings = ((__u16) (device_data->portb));
548 PortSettings = (PortSettings << 8);
549 PortSettings += ((__u16) (device_data->porta));
550
551 length = sizeof(struct qt_get_device_data);
552 dbg("%s - PortSettings = 0x%x\n", __func__, PortSettings);
553
554 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
555 QT_SET_GET_DEVICE, 0x40, PortSettings,
556 0, NULL, 0, 300);
557 return result;
558 }
559
560 static int qt_open_channel(struct usb_serial *serial, __u16 Uart_Number,
561 struct qt_open_channel_data *pDeviceData)
562 {
563 int result;
564
565 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
566 QT_OPEN_CLOSE_CHANNEL,
567 USBD_TRANSFER_DIRECTION_IN, 1, Uart_Number,
568 pDeviceData,
569 sizeof(struct qt_open_channel_data), 300);
570
571 return result;
572
573 }
574
575 static int qt_close_channel(struct usb_serial *serial, __u16 Uart_Number)
576 {
577 int result;
578
579 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
580 QT_OPEN_CLOSE_CHANNEL,
581 USBD_TRANSFER_DIRECTION_OUT, 0, Uart_Number,
582 NULL, 0, 300);
583
584 return result;
585
586 }
587
588 /****************************************************************************
589 * BoxGetRegister
590 * issuse a GET_REGISTER vendor-spcific request on the default control pipe
591 * If successful, fills in the pValue with the register value asked for
592 ****************************************************************************/
593 static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number,
594 unsigned short Register_Num, __u8 *pValue)
595 {
596 int result;
597 __u16 current_length;
598
599 current_length = sizeof(struct qt_get_device_data);
600
601 result =
602 usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
603 QT_GET_SET_REGISTER, 0xC0, Register_Num,
604 Uart_Number, (void *)pValue, sizeof(*pValue), 300);
605
606 return result;
607 }
608
609 /****************************************************************************
610 * BoxSetRegister
611 * issuse a GET_REGISTER vendor-spcific request on the default control pipe
612 * If successful, fills in the pValue with the register value asked for
613 ****************************************************************************/
614 static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number,
615 unsigned short Register_Num, unsigned short Value)
616 {
617 int result;
618 unsigned short RegAndByte;
619
620 RegAndByte = Value;
621 RegAndByte = RegAndByte << 8;
622 RegAndByte = RegAndByte + Register_Num;
623
624 /*
625 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
626 QT_GET_SET_REGISTER, 0xC0, Register_Num,
627 Uart_Number, NULL, 0, 300);
628 */
629
630 result =
631 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
632 QT_GET_SET_REGISTER, 0x40, RegAndByte, Uart_Number,
633 NULL, 0, 300);
634
635 return result;
636 }
637
638 /*
639 * qt_setuart
640 * issuse a SET_UART vendor-spcific request on the default control pipe
641 * If successful sets baud rate divisor and LCR value
642 */
643 static int qt_setuart(struct usb_serial *serial, unsigned short Uart_Number,
644 unsigned short default_divisor, unsigned char default_LCR)
645 {
646 int result;
647 unsigned short UartNumandLCR;
648
649 UartNumandLCR = (default_LCR << 8) + Uart_Number;
650
651 result =
652 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
653 QT_GET_SET_UART, 0x40, default_divisor,
654 UartNumandLCR, NULL, 0, 300);
655
656 return result;
657 }
658
659 static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int index,
660 int bSet)
661 {
662 __u8 mcr = 0;
663 __u8 msr = 0, MOUT_Value = 0;
664 unsigned int status;
665
666 if (bSet == 1) {
667 /* flow control, box will clear RTS line to prevent remote */
668 mcr = SERIAL_MCR_RTS;
669 } /* device from xmitting more chars */
670 else {
671 /* no flow control to remote device */
672 mcr = 0;
673
674 }
675 MOUT_Value = mcr << 8;
676
677 if (bSet == 1) {
678 /* flow control, box will inhibit xmit data if CTS line is
679 * asserted */
680 msr = SERIAL_MSR_CTS;
681 } else {
682 /* Box will not inhimbe xmit data due to CTS line */
683 msr = 0;
684 }
685 MOUT_Value |= msr;
686
687 status =
688 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
689 QT_HW_FLOW_CONTROL_MASK, 0x40, MOUT_Value,
690 index, NULL, 0, 300);
691 return status;
692
693 }
694
695 static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 index,
696 unsigned char stop_char, unsigned char start_char)
697 {
698 __u16 nSWflowout;
699 int result;
700
701 nSWflowout = start_char << 8;
702 nSWflowout = (unsigned short)stop_char;
703
704 result =
705 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
706 QT_SW_FLOW_CONTROL_MASK, 0x40, nSWflowout,
707 index, NULL, 0, 300);
708 return result;
709
710 }
711
712 static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index)
713 {
714 int result;
715
716 result =
717 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
718 QT_SW_FLOW_CONTROL_DISABLE, 0x40, 0, index,
719 NULL, 0, 300);
720 return result;
721
722 }
723
724 static int qt_startup(struct usb_serial *serial)
725 {
726 struct usb_serial_port *port;
727 struct quatech_port *qt_port;
728 struct qt_get_device_data DeviceData;
729 int i;
730 int status;
731
732 dbg("enterting %s", __func__);
733
734 /* Now setup per port private data */
735 for (i = 0; i < serial->num_ports; i++) {
736 port = serial->port[i];
737 qt_port = kzalloc(sizeof(*qt_port), GFP_KERNEL);
738 if (!qt_port) {
739 dbg("%s: kmalloc for quatech_port (%d) failed!.",
740 __func__, i);
741 for (--i; i >= 0; i--) {
742 port = serial->port[i];
743 kfree(usb_get_serial_port_data(port));
744 usb_set_serial_port_data(port, NULL);
745 }
746 return -ENOMEM;
747 }
748 spin_lock_init(&qt_port->lock);
749
750 usb_set_serial_port_data(port, qt_port);
751
752 }
753
754 status = qt_get_device(serial, &DeviceData);
755 if (status < 0) {
756 dbg(__FILE__ "box_get_device failed");
757 goto startup_error;
758 }
759
760 dbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb);
761
762 DeviceData.portb &= ~FULLPWRBIT;
763 dbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb);
764
765 status = qt_set_device(serial, &DeviceData);
766 if (status < 0) {
767 dbg(__FILE__ "qt_set_device failed\n");
768 goto startup_error;
769 }
770
771 status = qt_get_device(serial, &DeviceData);
772 if (status < 0) {
773 dbg(__FILE__ "qt_get_device failed");
774 goto startup_error;
775 }
776
777 switch (serial->dev->descriptor.idProduct) {
778 case QUATECH_SSU100:
779 case QUATECH_DSU100:
780 case QUATECH_QSU100:
781 case QUATECH_ESU100A:
782 case QUATECH_ESU100B:
783 case QUATECH_HSU100A:
784 case QUATECH_HSU100B:
785 case QUATECH_HSU100C:
786 case QUATECH_HSU100D:
787 DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
788 DeviceData.porta |= CLKS_X4;
789 DeviceData.portb &= ~(LOOPMODE_BITS);
790 DeviceData.portb |= RS232_MODE;
791 break;
792
793 case QUATECH_SSU200:
794 case QUATECH_DSU200:
795 case QUATECH_QSU200:
796 case QUATECH_ESU200A:
797 case QUATECH_ESU200B:
798 case QUATECH_HSU200A:
799 case QUATECH_HSU200B:
800 case QUATECH_HSU200C:
801 case QUATECH_HSU200D:
802 DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
803 DeviceData.porta |= CLKS_X4;
804 DeviceData.portb &= ~(LOOPMODE_BITS);
805 DeviceData.portb |= ALL_LOOPBACK;
806 break;
807 default:
808 DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
809 DeviceData.porta |= CLKS_X4;
810 DeviceData.portb &= ~(LOOPMODE_BITS);
811 DeviceData.portb |= RS232_MODE;
812 break;
813
814 }
815
816 status = BoxSetPrebufferLevel(serial); /* sets to default value */
817 if (status < 0) {
818 dbg(__FILE__ "BoxSetPrebufferLevel failed\n");
819 goto startup_error;
820 }
821
822 status = BoxSetATC(serial, ATC_DISABLED);
823 if (status < 0) {
824 dbg(__FILE__ "BoxSetATC failed\n");
825 goto startup_error;
826 }
827
828 dbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb);
829
830 DeviceData.portb |= NEXT_BOARD_POWER_BIT;
831 dbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb);
832
833 status = qt_set_device(serial, &DeviceData);
834 if (status < 0) {
835 dbg(__FILE__ "qt_set_device failed\n");
836 goto startup_error;
837 }
838
839 dbg("Exit Success %s\n", __func__);
840
841 return 0;
842
843 startup_error:
844 for (i = 0; i < serial->num_ports; i++) {
845 port = serial->port[i];
846 qt_port = qt_get_port_private(port);
847 kfree(qt_port);
848 usb_set_serial_port_data(port, NULL);
849 }
850
851 dbg("Exit fail %s\n", __func__);
852
853 return -EIO;
854 }
855
856 static void qt_release(struct usb_serial *serial)
857 {
858 struct usb_serial_port *port;
859 struct quatech_port *qt_port;
860 int i;
861
862 dbg("enterting %s", __func__);
863
864 for (i = 0; i < serial->num_ports; i++) {
865 port = serial->port[i];
866 if (!port)
867 continue;
868
869 qt_port = usb_get_serial_port_data(port);
870 kfree(qt_port);
871 usb_set_serial_port_data(port, NULL);
872 }
873
874 }
875
876 static int qt_open(struct tty_struct *tty,
877 struct usb_serial_port *port)
878 {
879 struct usb_serial *serial;
880 struct quatech_port *quatech_port;
881 struct quatech_port *port0;
882 struct qt_open_channel_data ChannelData;
883
884 int result;
885
886 if (port_paranoia_check(port, __func__))
887 return -ENODEV;
888
889 dbg("%s - port %d\n", __func__, port->number);
890
891 serial = port->serial;
892
893 if (serial_paranoia_check(serial, __func__))
894 return -ENODEV;
895
896 quatech_port = qt_get_port_private(port);
897 port0 = qt_get_port_private(serial->port[0]);
898
899 if (quatech_port == NULL || port0 == NULL)
900 return -ENODEV;
901
902 usb_clear_halt(serial->dev, port->write_urb->pipe);
903 usb_clear_halt(serial->dev, port->read_urb->pipe);
904 port0->open_ports++;
905
906 result = qt_get_device(serial, &port0->DeviceData);
907
908 /* Port specific setups */
909 result = qt_open_channel(serial, port->number, &ChannelData);
910 if (result < 0) {
911 dbg(__FILE__ "qt_open_channel failed\n");
912 return result;
913 }
914 dbg(__FILE__ "qt_open_channel completed.\n");
915
916 /* FIXME: are these needed? Does it even do anything useful? */
917 quatech_port->shadowLSR = ChannelData.line_status &
918 (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE | SERIAL_LSR_BI);
919
920 quatech_port->shadowMSR = ChannelData.modem_status &
921 (SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD);
922
923 /* Set Baud rate to default and turn off (default)flow control here */
924 result = qt_setuart(serial, port->number, DEFAULT_DIVISOR, DEFAULT_LCR);
925 if (result < 0) {
926 dbg(__FILE__ "qt_setuart failed\n");
927 return result;
928 }
929 dbg(__FILE__ "qt_setuart completed.\n");
930
931 /*
932 * Put this here to make it responsive to stty and defaults set by
933 * the tty layer
934 */
935 /* FIXME: is this needed? */
936 /* qt_set_termios(tty, port, NULL); */
937
938 /* Check to see if we've set up our endpoint info yet */
939 if (port0->open_ports == 1) {
940 if (serial->port[0]->interrupt_in_buffer == NULL) {
941 /* set up interrupt urb */
942 usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
943 serial->dev,
944 usb_rcvintpipe(serial->dev,
945 serial->port[0]->interrupt_in_endpointAddress),
946 serial->port[0]->interrupt_in_buffer,
947 serial->port[0]->
948 interrupt_in_urb->transfer_buffer_length,
949 qt_interrupt_callback, serial,
950 serial->port[0]->
951 interrupt_in_urb->interval);
952
953 result =
954 usb_submit_urb(serial->port[0]->interrupt_in_urb,
955 GFP_KERNEL);
956 if (result) {
957 dev_err(&port->dev,
958 "%s - Error %d submitting "
959 "interrupt urb\n", __func__, result);
960 }
961
962 }
963
964 }
965
966 dbg("port number is %d\n", port->number);
967 dbg("serial number is %d\n", port->serial->minor);
968 dbg("Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
969 dbg("BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
970 dbg("Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
971 dbg("port's number in the device is %d\n", quatech_port->port_num);
972 quatech_port->read_urb = port->read_urb;
973
974 /* set up our bulk in urb */
975
976 usb_fill_bulk_urb(quatech_port->read_urb,
977 serial->dev,
978 usb_rcvbulkpipe(serial->dev,
979 port->bulk_in_endpointAddress),
980 port->bulk_in_buffer,
981 quatech_port->read_urb->transfer_buffer_length,
982 qt_read_bulk_callback, quatech_port);
983
984 dbg("qt_open: bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
985 quatech_port->read_urb_busy = true;
986 result = usb_submit_urb(quatech_port->read_urb, GFP_KERNEL);
987 if (result) {
988 dev_err(&port->dev,
989 "%s - Error %d submitting control urb\n",
990 __func__, result);
991 quatech_port->read_urb_busy = false;
992 }
993
994 /* initialize our wait queues */
995 init_waitqueue_head(&quatech_port->wait);
996 init_waitqueue_head(&quatech_port->msr_wait);
997
998 /* initialize our icount structure */
999 memset(&(quatech_port->icount), 0x00, sizeof(quatech_port->icount));
1000
1001 return 0;
1002
1003 }
1004
1005 static int qt_chars_in_buffer(struct tty_struct *tty)
1006 {
1007 struct usb_serial_port *port = tty->driver_data;
1008 struct usb_serial *serial;
1009 int chars = 0;
1010
1011 serial = get_usb_serial(port, __func__);
1012
1013 dbg("%s - port %d\n", __func__, port->number);
1014
1015 if (serial->num_bulk_out) {
1016 if (port->write_urb->status == -EINPROGRESS)
1017 chars = port->write_urb->transfer_buffer_length;
1018 }
1019
1020 dbg("%s - returns %d\n", __func__, chars);
1021
1022 return chars;
1023 }
1024
1025 static void qt_block_until_empty(struct tty_struct *tty,
1026 struct quatech_port *qt_port)
1027 {
1028 int timeout = HZ / 10;
1029 int wait = 30;
1030 int count;
1031
1032 while (1) {
1033
1034 count = qt_chars_in_buffer(tty);
1035
1036 if (count <= 0)
1037 return;
1038
1039 interruptible_sleep_on_timeout(&qt_port->wait, timeout);
1040
1041 wait--;
1042 if (wait == 0) {
1043 dbg("%s - TIMEOUT", __func__);
1044 return;
1045 } else {
1046 wait = 30;
1047 }
1048 }
1049 }
1050
1051 static void qt_close(struct usb_serial_port *port)
1052 {
1053 struct usb_serial *serial = port->serial;
1054 struct quatech_port *qt_port;
1055 struct quatech_port *port0;
1056 struct tty_struct *tty;
1057 int status;
1058 unsigned int index;
1059 status = 0;
1060
1061 dbg("%s - port %d\n", __func__, port->number);
1062
1063 tty = tty_port_tty_get(&port->port);
1064 index = tty->index - serial->minor;
1065
1066 qt_port = qt_get_port_private(port);
1067 port0 = qt_get_port_private(serial->port[0]);
1068
1069 /* shutdown any bulk reads that might be going on */
1070 if (serial->num_bulk_out)
1071 usb_unlink_urb(port->write_urb);
1072 if (serial->num_bulk_in)
1073 usb_unlink_urb(port->read_urb);
1074
1075 /* wait up to for transmitter to empty */
1076 if (serial->dev)
1077 qt_block_until_empty(tty, qt_port);
1078 tty_kref_put(tty);
1079
1080 /* Close uart channel */
1081 status = qt_close_channel(serial, index);
1082 if (status < 0)
1083 dbg("%s - port %d qt_close_channel failed.\n",
1084 __func__, port->number);
1085
1086 port0->open_ports--;
1087
1088 dbg("qt_num_open_ports in close%d:in port%d\n",
1089 port0->open_ports, port->number);
1090
1091 if (port0->open_ports == 0) {
1092 if (serial->port[0]->interrupt_in_urb) {
1093 dbg("%s", "Shutdown interrupt_in_urb\n");
1094 usb_kill_urb(serial->port[0]->interrupt_in_urb);
1095 }
1096
1097 }
1098
1099 if (qt_port->write_urb) {
1100 /* if this urb had a transfer buffer already (old tx) free it */
1101 if (qt_port->write_urb->transfer_buffer != NULL)
1102 kfree(qt_port->write_urb->transfer_buffer);
1103 usb_free_urb(qt_port->write_urb);
1104 }
1105
1106 }
1107
1108 static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
1109 const unsigned char *buf, int count)
1110 {
1111 int result;
1112 struct usb_serial *serial = get_usb_serial(port, __func__);
1113
1114 if (serial == NULL)
1115 return -ENODEV;
1116
1117 dbg("%s - port %d\n", __func__, port->number);
1118
1119 if (count == 0) {
1120 dbg("%s - write request of 0 bytes\n", __func__);
1121 return 0;
1122 }
1123
1124 /* only do something if we have a bulk out endpoint */
1125 if (serial->num_bulk_out) {
1126 if (port->write_urb->status == -EINPROGRESS) {
1127 dbg("%s - already writing\n", __func__);
1128 return 0;
1129 }
1130
1131 count =
1132 (count > port->bulk_out_size) ? port->bulk_out_size : count;
1133 memcpy(port->write_urb->transfer_buffer, buf, count);
1134
1135 /* set up our urb */
1136
1137 usb_fill_bulk_urb(port->write_urb, serial->dev,
1138 usb_sndbulkpipe(serial->dev,
1139 port->
1140 bulk_out_endpointAddress),
1141 port->write_urb->transfer_buffer, count,
1142 qt_write_bulk_callback, port);
1143
1144 /* send the data out the bulk port */
1145 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1146 if (result)
1147 dbg("%s - failed submitting write urb, error %d\n",
1148 __func__, result);
1149 else
1150 result = count;
1151
1152 return result;
1153 }
1154
1155 /* no bulk out, so return 0 bytes written */
1156 return 0;
1157 }
1158
1159 static int qt_write_room(struct tty_struct *tty)
1160 {
1161 struct usb_serial_port *port = tty->driver_data;
1162 struct usb_serial *serial;
1163 struct quatech_port *qt_port;
1164 unsigned long flags;
1165
1166 int retval = -EINVAL;
1167
1168 if (port_paranoia_check(port, __func__)) {
1169 dbg("%s", "Invalid port\n");
1170 return -1;
1171 }
1172
1173 serial = get_usb_serial(port, __func__);
1174
1175 if (!serial)
1176 return -ENODEV;
1177
1178 qt_port = qt_get_port_private(port);
1179
1180 spin_lock_irqsave(&qt_port->lock, flags);
1181
1182 dbg("%s - port %d\n", __func__, port->number);
1183
1184 if (serial->num_bulk_out) {
1185 if (port->write_urb->status != -EINPROGRESS)
1186 retval = port->bulk_out_size;
1187 }
1188
1189 spin_unlock_irqrestore(&qt_port->lock, flags);
1190 return retval;
1191
1192 }
1193
1194 static int qt_ioctl(struct tty_struct *tty, struct file *file,
1195 unsigned int cmd, unsigned long arg)
1196 {
1197 struct usb_serial_port *port = tty->driver_data;
1198 struct quatech_port *qt_port = qt_get_port_private(port);
1199 struct usb_serial *serial = get_usb_serial(port, __func__);
1200 unsigned int index;
1201
1202 dbg("%s cmd 0x%04x", __func__, cmd);
1203
1204 index = tty->index - serial->minor;
1205
1206 if (cmd == TIOCMIWAIT) {
1207 while (qt_port != NULL) {
1208 interruptible_sleep_on(&qt_port->msr_wait);
1209 if (signal_pending(current))
1210 return -ERESTARTSYS;
1211 else {
1212 char diff = qt_port->diff_status;
1213
1214 if (diff == 0)
1215 return -EIO; /* no change => error */
1216
1217 /* Consume all events */
1218 qt_port->diff_status = 0;
1219
1220 if (((arg & TIOCM_RNG)
1221 && (diff & SERIAL_MSR_RI))
1222 || ((arg & TIOCM_DSR)
1223 && (diff & SERIAL_MSR_DSR))
1224 || ((arg & TIOCM_CD)
1225 && (diff & SERIAL_MSR_CD))
1226 || ((arg & TIOCM_CTS)
1227 && (diff & SERIAL_MSR_CTS))) {
1228 return 0;
1229 }
1230 }
1231 }
1232 return 0;
1233 }
1234
1235 dbg("%s -No ioctl for that one. port = %d\n", __func__, port->number);
1236 return -ENOIOCTLCMD;
1237 }
1238
1239 static void qt_set_termios(struct tty_struct *tty,
1240 struct usb_serial_port *port,
1241 struct ktermios *old_termios)
1242 {
1243 struct ktermios *termios = tty->termios;
1244 unsigned char new_LCR = 0;
1245 unsigned int cflag = termios->c_cflag;
1246 unsigned int index;
1247 int baud, divisor, remainder;
1248 int status;
1249
1250 dbg("%s", __func__);
1251
1252 index = tty->index - port->serial->minor;
1253
1254 switch (cflag) {
1255 case CS5:
1256 new_LCR |= SERIAL_5_DATA;
1257 break;
1258 case CS6:
1259 new_LCR |= SERIAL_6_DATA;
1260 break;
1261 case CS7:
1262 new_LCR |= SERIAL_7_DATA;
1263 break;
1264 default:
1265 case CS8:
1266 new_LCR |= SERIAL_8_DATA;
1267 break;
1268 }
1269
1270 /* Parity stuff */
1271 if (cflag & PARENB) {
1272 if (cflag & PARODD)
1273 new_LCR |= SERIAL_ODD_PARITY;
1274 else
1275 new_LCR |= SERIAL_EVEN_PARITY;
1276 }
1277 if (cflag & CSTOPB)
1278 new_LCR |= SERIAL_TWO_STOPB;
1279 else
1280 new_LCR |= SERIAL_ONE_STOPB;
1281
1282 dbg("%s - 4\n", __func__);
1283
1284 /* Thats the LCR stuff, go ahead and set it */
1285 baud = tty_get_baud_rate(tty);
1286 if (!baud)
1287 /* pick a default, any default... */
1288 baud = 9600;
1289
1290 dbg("%s - got baud = %d\n", __func__, baud);
1291
1292 divisor = MAX_BAUD_RATE / baud;
1293 remainder = MAX_BAUD_RATE % baud;
1294 /* Round to nearest divisor */
1295 if (((remainder * 2) >= baud) && (baud != 110))
1296 divisor++;
1297
1298 /*
1299 * Set Baud rate to default and turn off (default)flow control here
1300 */
1301 status =
1302 qt_setuart(port->serial, index, (unsigned short)divisor, new_LCR);
1303 if (status < 0) {
1304 dbg(__FILE__ "qt_setuart failed\n");
1305 return;
1306 }
1307
1308 /* Now determine flow control */
1309 if (cflag & CRTSCTS) {
1310 dbg("%s - Enabling HW flow control port %d\n", __func__,
1311 port->number);
1312
1313 /* Enable RTS/CTS flow control */
1314 status = BoxSetHW_FlowCtrl(port->serial, index, 1);
1315
1316 if (status < 0) {
1317 dbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
1318 return;
1319 }
1320 } else {
1321 /* Disable RTS/CTS flow control */
1322 dbg("%s - disabling HW flow control port %d\n", __func__,
1323 port->number);
1324
1325 status = BoxSetHW_FlowCtrl(port->serial, index, 0);
1326 if (status < 0) {
1327 dbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
1328 return;
1329 }
1330
1331 }
1332
1333 /* if we are implementing XON/XOFF, set the start and stop character in
1334 * the device */
1335 if (I_IXOFF(tty) || I_IXON(tty)) {
1336 unsigned char stop_char = STOP_CHAR(tty);
1337 unsigned char start_char = START_CHAR(tty);
1338 status =
1339 BoxSetSW_FlowCtrl(port->serial, index, stop_char,
1340 start_char);
1341 if (status < 0)
1342 dbg(__FILE__ "BoxSetSW_FlowCtrl (enabled) failed\n");
1343
1344 } else {
1345 /* disable SW flow control */
1346 status = BoxDisable_SW_FlowCtrl(port->serial, index);
1347 if (status < 0)
1348 dbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n");
1349
1350 }
1351 tty->termios->c_cflag &= ~CMSPAR;
1352 /* FIXME: Error cases should be returning the actual bits changed only */
1353 }
1354
1355 static void qt_break(struct tty_struct *tty, int break_state)
1356 {
1357 struct usb_serial_port *port = tty->driver_data;
1358 struct usb_serial *serial = get_usb_serial(port, __func__);
1359 struct quatech_port *qt_port;
1360 u16 index, onoff;
1361 unsigned int result;
1362 unsigned long flags;
1363
1364 index = tty->index - serial->minor;
1365
1366 qt_port = qt_get_port_private(port);
1367
1368 if (break_state == -1)
1369 onoff = 1;
1370 else
1371 onoff = 0;
1372
1373 spin_lock_irqsave(&qt_port->lock, flags);
1374
1375 dbg("%s - port %d\n", __func__, port->number);
1376
1377 result =
1378 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
1379 QT_BREAK_CONTROL, 0x40, onoff, index, NULL, 0, 300);
1380
1381 spin_unlock_irqrestore(&qt_port->lock, flags);
1382 }
1383
1384 static inline int qt_real_tiocmget(struct tty_struct *tty,
1385 struct usb_serial_port *port,
1386 struct usb_serial *serial)
1387 {
1388
1389 u8 mcr;
1390 u8 msr;
1391 unsigned int result = 0;
1392 int status;
1393 unsigned int index;
1394
1395 dbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
1396
1397 index = tty->index - serial->minor;
1398 status =
1399 BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr);
1400 if (status >= 0) {
1401 status =
1402 BoxGetRegister(port->serial, index,
1403 MODEM_STATUS_REGISTER, &msr);
1404
1405 }
1406
1407 if (status >= 0) {
1408 result = ((mcr & SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
1409 /* DTR IS SET */
1410 | ((mcr & SERIAL_MCR_RTS) ? TIOCM_RTS : 0)
1411 /* RTS IS SET */
1412 | ((msr & SERIAL_MSR_CTS) ? TIOCM_CTS : 0)
1413 /* CTS is set */
1414 | ((msr & SERIAL_MSR_CD) ? TIOCM_CAR : 0)
1415 /* Carrier detect is set */
1416 | ((msr & SERIAL_MSR_RI) ? TIOCM_RI : 0)
1417 /* Ring indicator set */
1418 | ((msr & SERIAL_MSR_DSR) ? TIOCM_DSR : 0);
1419 /* DSR is set */
1420 return result;
1421
1422 } else
1423 return -ESPIPE;
1424 }
1425
1426 static inline int qt_real_tiocmset(struct tty_struct *tty,
1427 struct usb_serial_port *port,
1428 struct usb_serial *serial,
1429 unsigned int value)
1430 {
1431
1432 u8 mcr;
1433 int status;
1434 unsigned int index;
1435
1436 dbg("%s - port %d\n", __func__, port->number);
1437
1438 index = tty->index - serial->minor;
1439 status =
1440 BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr);
1441 if (status < 0)
1442 return -ESPIPE;
1443
1444 /*
1445 * Turn off the RTS and DTR and loopbcck and then only turn on what was
1446 * asked for
1447 */
1448 mcr &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP);
1449 if (value & TIOCM_RTS)
1450 mcr |= SERIAL_MCR_RTS;
1451 if (value & TIOCM_DTR)
1452 mcr |= SERIAL_MCR_DTR;
1453 if (value & TIOCM_LOOP)
1454 mcr |= SERIAL_MCR_LOOP;
1455
1456 status =
1457 BoxSetRegister(port->serial, index, MODEM_CONTROL_REGISTER, mcr);
1458 if (status < 0)
1459 return -ESPIPE;
1460 else
1461 return 0;
1462 }
1463
1464 static int qt_tiocmget(struct tty_struct *tty)
1465 {
1466 struct usb_serial_port *port = tty->driver_data;
1467 struct usb_serial *serial = get_usb_serial(port, __func__);
1468 struct quatech_port *qt_port = qt_get_port_private(port);
1469 int retval = -ENODEV;
1470 unsigned long flags;
1471
1472 dbg("In %s\n", __func__);
1473
1474 if (!serial)
1475 return -ENODEV;
1476
1477 spin_lock_irqsave(&qt_port->lock, flags);
1478
1479 dbg("%s - port %d\n", __func__, port->number);
1480 dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
1481
1482 retval = qt_real_tiocmget(tty, port, serial);
1483
1484 spin_unlock_irqrestore(&qt_port->lock, flags);
1485 return retval;
1486 }
1487
1488 static int qt_tiocmset(struct tty_struct *tty,
1489 unsigned int set, unsigned int clear)
1490 {
1491
1492 struct usb_serial_port *port = tty->driver_data;
1493 struct usb_serial *serial = get_usb_serial(port, __func__);
1494 struct quatech_port *qt_port = qt_get_port_private(port);
1495 unsigned long flags;
1496 int retval = -ENODEV;
1497
1498 dbg("In %s\n", __func__);
1499
1500 if (!serial)
1501 return -ENODEV;
1502
1503 spin_lock_irqsave(&qt_port->lock, flags);
1504
1505 dbg("%s - port %d\n", __func__, port->number);
1506 dbg("%s - qt_port->RxHolding = %d\n", __func__, qt_port->RxHolding);
1507
1508 retval = qt_real_tiocmset(tty, port, serial, set);
1509
1510 spin_unlock_irqrestore(&qt_port->lock, flags);
1511 return retval;
1512 }
1513
1514 static void qt_throttle(struct tty_struct *tty)
1515 {
1516 struct usb_serial_port *port = tty->driver_data;
1517 struct usb_serial *serial = get_usb_serial(port, __func__);
1518 struct quatech_port *qt_port;
1519 unsigned long flags;
1520
1521 dbg("%s - port %d\n", __func__, port->number);
1522
1523 if (!serial)
1524 return;
1525
1526 qt_port = qt_get_port_private(port);
1527
1528 spin_lock_irqsave(&qt_port->lock, flags);
1529
1530 /* pass on to the driver specific version of this function */
1531 qt_port->RxHolding = 1;
1532 dbg("%s - port->RxHolding = 1\n", __func__);
1533
1534 spin_unlock_irqrestore(&qt_port->lock, flags);
1535 return;
1536 }
1537
1538 static void qt_unthrottle(struct tty_struct *tty)
1539 {
1540 struct usb_serial_port *port = tty->driver_data;
1541 struct usb_serial *serial = get_usb_serial(port, __func__);
1542 struct quatech_port *qt_port;
1543 unsigned long flags;
1544 unsigned int result;
1545
1546 if (!serial)
1547 return;
1548
1549 qt_port = qt_get_port_private(port);
1550
1551 spin_lock_irqsave(&qt_port->lock, flags);
1552
1553 dbg("%s - port %d\n", __func__, port->number);
1554
1555 if (qt_port->RxHolding == 1) {
1556 dbg("%s -qt_port->RxHolding == 1\n", __func__);
1557
1558 qt_port->RxHolding = 0;
1559 dbg("%s - qt_port->RxHolding = 0\n", __func__);
1560
1561 /* if we have a bulk endpoint, start it up */
1562 if ((serial->num_bulk_in) && (qt_port->ReadBulkStopped == 1)) {
1563 /* Start reading from the device */
1564 usb_fill_bulk_urb(port->read_urb, serial->dev,
1565 usb_rcvbulkpipe(serial->dev,
1566 port->bulk_in_endpointAddress),
1567 port->read_urb->transfer_buffer,
1568 port->read_urb->
1569 transfer_buffer_length,
1570 qt_read_bulk_callback, port);
1571 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
1572 if (result)
1573 err("%s - failed restarting read urb, error %d",
1574 __func__, result);
1575 }
1576 }
1577 spin_unlock_irqrestore(&qt_port->lock, flags);
1578 return;
1579
1580 }
1581
1582 static int qt_calc_num_ports(struct usb_serial *serial)
1583 {
1584 int num_ports;
1585
1586 dbg("numberofendpoints: %d\n",
1587 (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
1588 dbg("numberofendpoints: %d\n",
1589 (int)serial->interface->altsetting->desc.bNumEndpoints);
1590
1591 num_ports =
1592 (serial->interface->cur_altsetting->desc.bNumEndpoints - 1) / 2;
1593
1594 return num_ports;
1595 }
1596
1597 static struct usb_serial_driver quatech_device = {
1598 .driver = {
1599 .owner = THIS_MODULE,
1600 .name = "serqt",
1601 },
1602 .description = DRIVER_DESC,
1603 .usb_driver = &serqt_usb_driver,
1604 .id_table = serqt_id_table,
1605 .num_ports = 8,
1606 .open = qt_open,
1607 .close = qt_close,
1608 .write = qt_write,
1609 .write_room = qt_write_room,
1610 .chars_in_buffer = qt_chars_in_buffer,
1611 .throttle = qt_throttle,
1612 .unthrottle = qt_unthrottle,
1613 .calc_num_ports = qt_calc_num_ports,
1614 .ioctl = qt_ioctl,
1615 .set_termios = qt_set_termios,
1616 .break_ctl = qt_break,
1617 .tiocmget = qt_tiocmget,
1618 .tiocmset = qt_tiocmset,
1619 .attach = qt_startup,
1620 .release = qt_release,
1621 };
1622
1623 static int __init serqt_usb_init(void)
1624 {
1625 int retval;
1626
1627 dbg("%s\n", __func__);
1628
1629 /* register with usb-serial */
1630 retval = usb_serial_register(&quatech_device);
1631
1632 if (retval)
1633 goto failed_usb_serial_register;
1634
1635 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
1636 DRIVER_DESC "\n");
1637
1638 /* register with usb */
1639
1640 retval = usb_register(&serqt_usb_driver);
1641 if (retval == 0)
1642 return 0;
1643
1644 /* if we're here, usb_register() failed */
1645 usb_serial_deregister(&quatech_device);
1646 failed_usb_serial_register:
1647 return retval;
1648 }
1649
1650 static void __exit serqt_usb_exit(void)
1651 {
1652 usb_deregister(&serqt_usb_driver);
1653 usb_serial_deregister(&quatech_device);
1654 }
1655
1656 module_init(serqt_usb_init);
1657 module_exit(serqt_usb_exit);
1658
1659 MODULE_AUTHOR(DRIVER_AUTHOR);
1660 MODULE_DESCRIPTION(DRIVER_DESC);
1661 MODULE_LICENSE("GPL");
1662
1663 module_param(debug, bool, S_IRUGO | S_IWUSR);
1664 MODULE_PARM_DESC(debug, "Debug enabled or not");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree