drivers/net/wireless/wl12xx/spi.c

   1 /*
   2  * This file is part of wl1271
   3  *
   4  * Copyright (C) 2008-2009 Nokia Corporation
   5  *
   6  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  *
  22  */
  23
  24 #include <linux/interrupt.h>
  25 #include <linux/irq.h>
  26 #include <linux/module.h>
  27 #include <linux/crc7.h>
  28 #include <linux/spi/spi.h>
  29 #include <linux/wl12xx.h>
  30 #include <linux/slab.h>
  31
  32 #include "wl12xx.h"
  33 #include "wl12xx_80211.h"
  34 #include "io.h"
  35
  36 #include "reg.h"
  37
  38 #define WSPI_CMD_READ                 0x40000000
  39 #define WSPI_CMD_WRITE                0x00000000
  40 #define WSPI_CMD_FIXED                0x20000000
  41 #define WSPI_CMD_BYTE_LENGTH          0x1FFE0000
  42 #define WSPI_CMD_BYTE_LENGTH_OFFSET   17
  43 #define WSPI_CMD_BYTE_ADDR            0x0001FFFF
  44
  45 #define WSPI_INIT_CMD_CRC_LEN       5
  46
  47 #define WSPI_INIT_CMD_START         0x00
  48 #define WSPI_INIT_CMD_TX            0x40
  49 /* the extra bypass bit is sampled by the TNET as '1' */
  50 #define WSPI_INIT_CMD_BYPASS_BIT    0x80
  51 #define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
  52 #define WSPI_INIT_CMD_EN_FIXEDBUSY  0x80
  53 #define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
  54 #define WSPI_INIT_CMD_IOD           0x40
  55 #define WSPI_INIT_CMD_IP            0x20
  56 #define WSPI_INIT_CMD_CS            0x10
  57 #define WSPI_INIT_CMD_WS            0x08
  58 #define WSPI_INIT_CMD_WSPI          0x01
  59 #define WSPI_INIT_CMD_END           0x01
  60
  61 #define WSPI_INIT_CMD_LEN           8
  62
  63 #define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
  64                 ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
  65 #define HW_ACCESS_WSPI_INIT_CMD_MASK  0
  66
  67 /* HW limitation: maximum possible chunk size is 4095 bytes */
  68 #define WSPI_MAX_CHUNK_SIZE    4092
  69
  70 #define WSPI_MAX_NUM_OF_CHUNKS (WL1271_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE)
  71
  72 static inline struct spi_device *wl_to_spi(struct wl1271 *wl)
  73 {
  74         return wl->if_priv;
  75 }
  76
  77 static struct device *wl1271_spi_wl_to_dev(struct wl1271 *wl)
  78 {
  79         return &(wl_to_spi(wl)->dev);
  80 }
  81
  82 static void wl1271_spi_disable_interrupts(struct wl1271 *wl)
  83 {
  84         disable_irq(wl->irq);
  85 }
  86
  87 static void wl1271_spi_enable_interrupts(struct wl1271 *wl)
  88 {
  89         enable_irq(wl->irq);
  90 }
  91
  92 static void wl1271_spi_reset(struct wl1271 *wl)
  93 {
  94         u8 *cmd;
  95         struct spi_transfer t;
  96         struct spi_message m;
  97
  98         cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
  99         if (!cmd) {
 100                 wl1271_error("could not allocate cmd for spi reset");
 101                 return;
 102         }
 103
 104         memset(&t, 0, sizeof(t));
 105         spi_message_init(&m);
 106
 107         memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
 108
 109         t.tx_buf = cmd;
 110         t.len = WSPI_INIT_CMD_LEN;
 111         spi_message_add_tail(&t, &m);
 112
 113         spi_sync(wl_to_spi(wl), &m);
 114
 115         wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
 116         kfree(cmd);
 117 }
 118
 119 static void wl1271_spi_init(struct wl1271 *wl)
 120 {
 121         u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
 122         struct spi_transfer t;
 123         struct spi_message m;
 124
 125         cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
 126         if (!cmd) {
 127                 wl1271_error("could not allocate cmd for spi init");
 128                 return;
 129         }
 130
 131         memset(crc, 0, sizeof(crc));
 132         memset(&t, 0, sizeof(t));
 133         spi_message_init(&m);
 134
 135         /*
 136          * Set WSPI_INIT_COMMAND
 137          * the data is being send from the MSB to LSB
 138          */
 139         cmd[2] = 0xff;
 140         cmd[3] = 0xff;
 141         cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
 142         cmd[0] = 0;
 143         cmd[7] = 0;
 144         cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
 145         cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
 146
 147         if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
 148                 cmd[5] |=  WSPI_INIT_CMD_DIS_FIXEDBUSY;
 149         else
 150                 cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
 151
 152         cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
 153                 | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
 154
 155         crc[0] = cmd[1];
 156         crc[1] = cmd[0];
 157         crc[2] = cmd[7];
 158         crc[3] = cmd[6];
 159         crc[4] = cmd[5];
 160
 161         cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
 162         cmd[4] |= WSPI_INIT_CMD_END;
 163
 164         t.tx_buf = cmd;
 165         t.len = WSPI_INIT_CMD_LEN;
 166         spi_message_add_tail(&t, &m);
 167
 168         spi_sync(wl_to_spi(wl), &m);
 169         wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
 170         kfree(cmd);
 171 }
 172
 173 #define WL1271_BUSY_WORD_TIMEOUT 1000
 174
 175 static int wl1271_spi_read_busy(struct wl1271 *wl)
 176 {
 177         struct spi_transfer t[1];
 178         struct spi_message m;
 179         u32 *busy_buf;
 180         int num_busy_bytes = 0;
 181
 182         /*
 183          * Read further busy words from SPI until a non-busy word is
 184          * encountered, then read the data itself into the buffer.
 185          */
 186
 187         num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
 188         busy_buf = wl->buffer_busyword;
 189         while (num_busy_bytes) {
 190                 num_busy_bytes--;
 191                 spi_message_init(&m);
 192                 memset(t, 0, sizeof(t));
 193                 t[0].rx_buf = busy_buf;
 194                 t[0].len = sizeof(u32);
 195                 t[0].cs_change = true;
 196                 spi_message_add_tail(&t[0], &m);
 197                 spi_sync(wl_to_spi(wl), &m);
 198
 199                 if (*busy_buf & 0x1)
 200                         return 0;
 201         }
 202
 203         /* The SPI bus is unresponsive, the read failed. */
 204         wl1271_error("SPI read busy-word timeout!\n");
 205         return -ETIMEDOUT;
 206 }
 207
 208 static void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
 209                                 size_t len, bool fixed)
 210 {
 211         struct spi_transfer t[2];
 212         struct spi_message m;
 213         u32 *busy_buf;
 214         u32 *cmd;
 215         u32 chunk_len;
 216
 217         while (len > 0) {
 218                 chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
 219
 220                 cmd = &wl->buffer_cmd;
 221                 busy_buf = wl->buffer_busyword;
 222
 223                 *cmd = 0;
 224                 *cmd |= WSPI_CMD_READ;
 225                 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
 226                         WSPI_CMD_BYTE_LENGTH;
 227                 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
 228
 229                 if (fixed)
 230                         *cmd |= WSPI_CMD_FIXED;
 231
 232                 spi_message_init(&m);
 233                 memset(t, 0, sizeof(t));
 234
 235                 t[0].tx_buf = cmd;
 236                 t[0].len = 4;
 237                 t[0].cs_change = true;
 238                 spi_message_add_tail(&t[0], &m);
 239
 240                 /* Busy and non busy words read */
 241                 t[1].rx_buf = busy_buf;
 242                 t[1].len = WL1271_BUSY_WORD_LEN;
 243                 t[1].cs_change = true;
 244                 spi_message_add_tail(&t[1], &m);
 245
 246                 spi_sync(wl_to_spi(wl), &m);
 247
 248                 if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
 249                     wl1271_spi_read_busy(wl)) {
 250                         memset(buf, 0, chunk_len);
 251                         return;
 252                 }
 253
 254                 spi_message_init(&m);
 255                 memset(t, 0, sizeof(t));
 256
 257                 t[0].rx_buf = buf;
 258                 t[0].len = chunk_len;
 259                 t[0].cs_change = true;
 260                 spi_message_add_tail(&t[0], &m);
 261
 262                 spi_sync(wl_to_spi(wl), &m);
 263
 264                 wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
 265                 wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, chunk_len);
 266
 267                 if (!fixed)
 268                         addr += chunk_len;
 269                 buf += chunk_len;
 270                 len -= chunk_len;
 271         }
 272 }
 273
 274 static void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
 275                           size_t len, bool fixed)
 276 {
 277         struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS];
 278         struct spi_message m;
 279         u32 commands[WSPI_MAX_NUM_OF_CHUNKS];
 280         u32 *cmd;
 281         u32 chunk_len;
 282         int i;
 283
 284         WARN_ON(len > WL1271_AGGR_BUFFER_SIZE);
 285
 286         spi_message_init(&m);
 287         memset(t, 0, sizeof(t));
 288
 289         cmd = &commands[0];
 290         i = 0;
 291         while (len > 0) {
 292                 chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
 293
 294                 *cmd = 0;
 295                 *cmd |= WSPI_CMD_WRITE;
 296                 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
 297                         WSPI_CMD_BYTE_LENGTH;
 298                 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
 299
 300                 if (fixed)
 301                         *cmd |= WSPI_CMD_FIXED;
 302
 303                 t[i].tx_buf = cmd;
 304                 t[i].len = sizeof(*cmd);
 305                 spi_message_add_tail(&t[i++], &m);
 306
 307                 t[i].tx_buf = buf;
 308                 t[i].len = chunk_len;
 309                 spi_message_add_tail(&t[i++], &m);
 310
 311                 wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
 312                 wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, chunk_len);
 313
 314                 if (!fixed)
 315                         addr += chunk_len;
 316                 buf += chunk_len;
 317                 len -= chunk_len;
 318                 cmd++;
 319         }
 320
 321         spi_sync(wl_to_spi(wl), &m);
 322 }
 323
 324 static irqreturn_t wl1271_hardirq(int irq, void *cookie)
 325 {
 326         struct wl1271 *wl = cookie;
 327         unsigned long flags;
 328
 329         wl1271_debug(DEBUG_IRQ, "IRQ");
 330
 331         /* complete the ELP completion */
 332         spin_lock_irqsave(&wl->wl_lock, flags);
 333         set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags);
 334         if (wl->elp_compl) {
 335                 complete(wl->elp_compl);
 336                 wl->elp_compl = NULL;
 337         }
 338         spin_unlock_irqrestore(&wl->wl_lock, flags);
 339
 340         return IRQ_WAKE_THREAD;
 341 }
 342
 343 static int wl1271_spi_set_power(struct wl1271 *wl, bool enable)
 344 {
 345         if (wl->set_power)
 346                 wl->set_power(enable);
 347
 348         return 0;
 349 }
 350
 351 static struct wl1271_if_operations spi_ops = {
 352         .read           = wl1271_spi_raw_read,
 353         .write          = wl1271_spi_raw_write,
 354         .reset          = wl1271_spi_reset,
 355         .init           = wl1271_spi_init,
 356         .power          = wl1271_spi_set_power,
 357         .dev            = wl1271_spi_wl_to_dev,
 358         .enable_irq     = wl1271_spi_enable_interrupts,
 359         .disable_irq    = wl1271_spi_disable_interrupts,
 360         .set_block_size = NULL,
 361 };
 362
 363 static int __devinit wl1271_probe(struct spi_device *spi)
 364 {
 365         struct wl12xx_platform_data *pdata;
 366         struct ieee80211_hw *hw;
 367         struct wl1271 *wl;
 368         unsigned long irqflags;
 369         int ret;
 370
 371         pdata = spi->dev.platform_data;
 372         if (!pdata) {
 373                 wl1271_error("no platform data");
 374                 return -ENODEV;
 375         }
 376
 377         hw = wl1271_alloc_hw();
 378         if (IS_ERR(hw))
 379                 return PTR_ERR(hw);
 380
 381         wl = hw->priv;
 382
 383         dev_set_drvdata(&spi->dev, wl);
 384         wl->if_priv = spi;
 385
 386         wl->if_ops = &spi_ops;
 387
 388         /* This is the only SPI value that we need to set here, the rest
 389          * comes from the board-peripherals file */
 390         spi->bits_per_word = 32;
 391
 392         ret = spi_setup(spi);
 393         if (ret < 0) {
 394                 wl1271_error("spi_setup failed");
 395                 goto out_free;
 396         }
 397
 398         wl->set_power = pdata->set_power;
 399         if (!wl->set_power) {
 400                 wl1271_error("set power function missing in platform data");
 401                 ret = -ENODEV;
 402                 goto out_free;
 403         }
 404
 405         wl->ref_clock = pdata->board_ref_clock;
 406         wl->tcxo_clock = pdata->board_tcxo_clock;
 407         wl->platform_quirks = pdata->platform_quirks;
 408
 409         if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
 410                 irqflags = IRQF_TRIGGER_RISING;
 411         else
 412                 irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
 413
 414         wl->irq = spi->irq;
 415         if (wl->irq < 0) {
 416                 wl1271_error("irq missing in platform data");
 417                 ret = -ENODEV;
 418                 goto out_free;
 419         }
 420
 421         ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
 422                                    irqflags,
 423                                    DRIVER_NAME, wl);
 424         if (ret < 0) {
 425                 wl1271_error("request_irq() failed: %d", ret);
 426                 goto out_free;
 427         }
 428
 429         disable_irq(wl->irq);
 430
 431         ret = wl1271_init_ieee80211(wl);
 432         if (ret)
 433                 goto out_irq;
 434
 435         ret = wl1271_register_hw(wl);
 436         if (ret)
 437                 goto out_irq;
 438
 439         return 0;
 440
 441  out_irq:
 442         free_irq(wl->irq, wl);
 443
 444  out_free:
 445         wl1271_free_hw(wl);
 446
 447         return ret;
 448 }
 449
 450 static int __devexit wl1271_remove(struct spi_device *spi)
 451 {
 452         struct wl1271 *wl = dev_get_drvdata(&spi->dev);
 453
 454         wl1271_unregister_hw(wl);
 455         free_irq(wl->irq, wl);
 456         wl1271_free_hw(wl);
 457
 458         return 0;
 459 }
 460
 461
 462 static struct spi_driver wl1271_spi_driver = {
 463         .driver = {
 464                 .name           = "wl1271_spi",
 465                 .bus            = &spi_bus_type,
 466                 .owner          = THIS_MODULE,
 467         },
 468
 469         .probe          = wl1271_probe,
 470         .remove         = __devexit_p(wl1271_remove),
 471 };
 472
 473 static int __init wl1271_init(void)
 474 {
 475         return spi_register_driver(&wl1271_spi_driver);
 476 }
 477
 478 static void __exit wl1271_exit(void)
 479 {
 480         spi_unregister_driver(&wl1271_spi_driver);
 481 }
 482
 483 module_init(wl1271_init);
 484 module_exit(wl1271_exit);
 485
 486 MODULE_LICENSE("GPL");
 487 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 488 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
 489 MODULE_FIRMWARE(WL1271_FW_NAME);
 490 MODULE_FIRMWARE(WL128X_FW_NAME);
 491 MODULE_FIRMWARE(WL127X_AP_FW_NAME);
 492 MODULE_FIRMWARE(WL128X_AP_FW_NAME);
 493 MODULE_ALIAS("spi:wl1271");