1 /* hplance.c : the Linux/hp300/lance ethernet driver
3 * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
4 * Based on the Sun Lance driver and the NetBSD HP Lance driver
5 * Uses the generic 7990.c LANCE code.
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/types.h>
11 #include <linux/interrupt.h>
12 #include <linux/ioport.h>
13 #include <linux/slab.h>
14 #include <linux/string.h>
15 #include <linux/delay.h>
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 /* Used for the temporal inet entries and routing */
19 #include <linux/socket.h>
20 #include <linux/route.h>
21 #include <linux/dio.h>
22 #include <linux/netdevice.h>
23 #include <linux/etherdevice.h>
24 #include <linux/skbuff.h>
26 #include <asm/system.h>
28 #include <asm/pgtable.h>
32 /* We have 16834 bytes of RAM for the init block and buffers. This places
33 * an upper limit on the number of buffers we can use. NetBSD uses 8 Rx
34 * buffers and 2 Tx buffers.
36 #define LANCE_LOG_TX_BUFFERS 1
37 #define LANCE_LOG_RX_BUFFERS 3
39 #include "7990.h" /* use generic LANCE code */
41 /* Our private data structure */
42 struct hplance_private
{
43 struct lance_private lance
;
46 /* function prototypes... This is easy because all the grot is in the
47 * generic LANCE support. All we have to support is probing for boards,
48 * plus board-specific init, open and close actions.
49 * Oh, and we need to tell the generic code how to read and write LANCE registers...
51 static int __devinit
hplance_init_one(struct dio_dev
*d
,
52 const struct dio_device_id
*ent
);
53 static void __devinit
hplance_init(struct net_device
*dev
,
55 static void __devexit
hplance_remove_one(struct dio_dev
*d
);
56 static void hplance_writerap(void *priv
, unsigned short value
);
57 static void hplance_writerdp(void *priv
, unsigned short value
);
58 static unsigned short hplance_readrdp(void *priv
);
59 static int hplance_open(struct net_device
*dev
);
60 static int hplance_close(struct net_device
*dev
);
62 static struct dio_device_id hplance_dio_tbl
[] = {
67 static struct dio_driver hplance_driver
= {
69 .id_table
= hplance_dio_tbl
,
70 .probe
= hplance_init_one
,
71 .remove
= __devexit_p(hplance_remove_one
),
74 static const struct net_device_ops hplance_netdev_ops
= {
75 .ndo_open
= hplance_open
,
76 .ndo_stop
= hplance_close
,
77 .ndo_start_xmit
= lance_start_xmit
,
78 .ndo_set_multicast_list
= lance_set_multicast
,
79 .ndo_change_mtu
= eth_change_mtu
,
80 .ndo_validate_addr
= eth_validate_addr
,
81 .ndo_set_mac_address
= eth_mac_addr
,
82 #ifdef CONFIG_NET_POLL_CONTROLLER
83 .ndo_poll_controller
= lance_poll
,
87 /* Find all the HP Lance boards and initialise them... */
88 static int __devinit
hplance_init_one(struct dio_dev
*d
,
89 const struct dio_device_id
*ent
)
91 struct net_device
*dev
;
95 dev
= alloc_etherdev(sizeof(struct hplance_private
));
100 if (!request_mem_region(dio_resource_start(d
),
101 dio_resource_len(d
), d
->name
))
102 goto out_free_netdev
;
104 hplance_init(dev
, d
);
105 err
= register_netdev(dev
);
107 goto out_release_mem_region
;
109 dio_set_drvdata(d
, dev
);
111 printk(KERN_INFO
"%s: %s; select code %d, addr %2.2x", dev
->name
, d
->name
, d
->scode
, dev
->dev_addr
[0]);
113 for (i
=1; i
<6; i
++) {
114 printk(":%2.2x", dev
->dev_addr
[i
]);
117 printk(", irq %d\n", d
->ipl
);
121 out_release_mem_region
:
122 release_mem_region(dio_resource_start(d
), dio_resource_len(d
));
129 static void __devexit
hplance_remove_one(struct dio_dev
*d
)
131 struct net_device
*dev
= dio_get_drvdata(d
);
133 unregister_netdev(dev
);
134 release_mem_region(dio_resource_start(d
), dio_resource_len(d
));
138 /* Initialise a single lance board at the given DIO device */
139 static void __init
hplance_init(struct net_device
*dev
, struct dio_dev
*d
)
141 unsigned long va
= (d
->resource
.start
+ DIO_VIRADDRBASE
);
142 struct hplance_private
*lp
;
145 /* reset the board */
146 out_8(va
+DIO_IDOFF
, 0xff);
147 udelay(100); /* ariba! ariba! udelay! udelay! */
149 /* Fill the dev fields */
151 dev
->netdev_ops
= &hplance_netdev_ops
;
154 for (i
=0; i
<6; i
++) {
155 /* The NVRAM holds our ethernet address, one nibble per byte,
156 * at bytes NVRAMOFF+1,3,5,7,9...
158 dev
->dev_addr
[i
] = ((in_8(va
+ HPLANCE_NVRAMOFF
+ i
*4 + 1) & 0xF) << 4)
159 | (in_8(va
+ HPLANCE_NVRAMOFF
+ i
*4 + 3) & 0xF);
162 lp
= netdev_priv(dev
);
163 lp
->lance
.name
= (char*)d
->name
; /* discards const, shut up gcc */
165 lp
->lance
.init_block
= (struct lance_init_block
*)(va
+ HPLANCE_MEMOFF
); /* CPU addr */
166 lp
->lance
.lance_init_block
= NULL
; /* LANCE addr of same RAM */
167 lp
->lance
.busmaster_regval
= LE_C3_BSWP
; /* we're bigendian */
168 lp
->lance
.irq
= d
->ipl
;
169 lp
->lance
.writerap
= hplance_writerap
;
170 lp
->lance
.writerdp
= hplance_writerdp
;
171 lp
->lance
.readrdp
= hplance_readrdp
;
172 lp
->lance
.lance_log_rx_bufs
= LANCE_LOG_RX_BUFFERS
;
173 lp
->lance
.lance_log_tx_bufs
= LANCE_LOG_TX_BUFFERS
;
174 lp
->lance
.rx_ring_mod_mask
= RX_RING_MOD_MASK
;
175 lp
->lance
.tx_ring_mod_mask
= TX_RING_MOD_MASK
;
178 /* This is disgusting. We have to check the DIO status register for ack every
179 * time we read or write the LANCE registers.
181 static void hplance_writerap(void *priv
, unsigned short value
)
183 struct lance_private
*lp
= (struct lance_private
*)priv
;
185 out_be16(lp
->base
+ HPLANCE_REGOFF
+ LANCE_RAP
, value
);
186 } while ((in_8(lp
->base
+ HPLANCE_STATUS
) & LE_ACK
) == 0);
189 static void hplance_writerdp(void *priv
, unsigned short value
)
191 struct lance_private
*lp
= (struct lance_private
*)priv
;
193 out_be16(lp
->base
+ HPLANCE_REGOFF
+ LANCE_RDP
, value
);
194 } while ((in_8(lp
->base
+ HPLANCE_STATUS
) & LE_ACK
) == 0);
197 static unsigned short hplance_readrdp(void *priv
)
199 struct lance_private
*lp
= (struct lance_private
*)priv
;
202 value
= in_be16(lp
->base
+ HPLANCE_REGOFF
+ LANCE_RDP
);
203 } while ((in_8(lp
->base
+ HPLANCE_STATUS
) & LE_ACK
) == 0);
207 static int hplance_open(struct net_device
*dev
)
210 struct lance_private
*lp
= netdev_priv(dev
);
212 status
= lance_open(dev
); /* call generic lance open code */
215 /* enable interrupts at board level. */
216 out_8(lp
->base
+ HPLANCE_STATUS
, LE_IE
);
221 static int hplance_close(struct net_device
*dev
)
223 struct lance_private
*lp
= netdev_priv(dev
);
225 out_8(lp
->base
+ HPLANCE_STATUS
, 0); /* disable interrupts at boardlevel */
230 static int __init
hplance_init_module(void)
232 return dio_register_driver(&hplance_driver
);
235 static void __exit
hplance_cleanup_module(void)
237 dio_unregister_driver(&hplance_driver
);
240 module_init(hplance_init_module
);
241 module_exit(hplance_cleanup_module
);
243 MODULE_LICENSE("GPL");