Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / video / cyber2000fb.c
blobda7c01b39be248129a1a5f99274695cc510872d2
1 /*
2 * linux/drivers/video/cyber2000fb.c
4 * Copyright (C) 1998-2002 Russell King
6 * MIPS and 50xx clock support
7 * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
9 * 32 bit support, text color and panning fixes for modes != 8 bit
10 * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
16 * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
18 * Based on cyberfb.c.
20 * Note that we now use the new fbcon fix, var and cmap scheme. We do
21 * still have to check which console is the currently displayed one
22 * however, especially for the colourmap stuff.
24 * We also use the new hotplug PCI subsystem. I'm not sure if there
25 * are any such cards, but I'm erring on the side of caution. We don't
26 * want to go pop just because someone does have one.
28 * Note that this doesn't work fully in the case of multiple CyberPro
29 * cards with grabbers. We currently can only attach to the first
30 * CyberPro card found.
32 * When we're in truecolour mode, we power down the LUT RAM as a power
33 * saving feature. Also, when we enter any of the powersaving modes
34 * (except soft blanking) we power down the RAMDACs. This saves about
35 * 1W, which is roughly 8% of the power consumption of a NetWinder
36 * (which, incidentally, is about the same saving as a 2.5in hard disk
37 * entering standby mode.)
39 #include <linux/module.h>
40 #include <linux/kernel.h>
41 #include <linux/errno.h>
42 #include <linux/string.h>
43 #include <linux/mm.h>
44 #include <linux/slab.h>
45 #include <linux/delay.h>
46 #include <linux/fb.h>
47 #include <linux/pci.h>
48 #include <linux/init.h>
49 #include <linux/io.h>
51 #include <asm/pgtable.h>
52 #include <asm/system.h>
54 #ifdef __arm__
55 #include <asm/mach-types.h>
56 #endif
58 #include "cyber2000fb.h"
60 struct cfb_info {
61 struct fb_info fb;
62 struct display_switch *dispsw;
63 struct display *display;
64 struct pci_dev *dev;
65 unsigned char __iomem *region;
66 unsigned char __iomem *regs;
67 u_int id;
68 int func_use_count;
69 u_long ref_ps;
72 * Clock divisors
74 u_int divisors[4];
76 struct {
77 u8 red, green, blue;
78 } palette[NR_PALETTE];
80 u_char mem_ctl1;
81 u_char mem_ctl2;
82 u_char mclk_mult;
83 u_char mclk_div;
85 * RAMDAC control register is both of these or'ed together
87 u_char ramdac_ctrl;
88 u_char ramdac_powerdown;
90 u32 pseudo_palette[16];
93 static char *default_font = "Acorn8x8";
94 module_param(default_font, charp, 0);
95 MODULE_PARM_DESC(default_font, "Default font name");
98 * Our access methods.
100 #define cyber2000fb_writel(val, reg, cfb) writel(val, (cfb)->regs + (reg))
101 #define cyber2000fb_writew(val, reg, cfb) writew(val, (cfb)->regs + (reg))
102 #define cyber2000fb_writeb(val, reg, cfb) writeb(val, (cfb)->regs + (reg))
104 #define cyber2000fb_readb(reg, cfb) readb((cfb)->regs + (reg))
106 static inline void
107 cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
109 cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
112 static inline void
113 cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
115 cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
118 static inline unsigned int
119 cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
121 cyber2000fb_writeb(reg, 0x3ce, cfb);
122 return cyber2000fb_readb(0x3cf, cfb);
125 static inline void
126 cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
128 cyber2000fb_readb(0x3da, cfb);
129 cyber2000fb_writeb(reg, 0x3c0, cfb);
130 cyber2000fb_readb(0x3c1, cfb);
131 cyber2000fb_writeb(val, 0x3c0, cfb);
134 static inline void
135 cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
137 cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
140 /* -------------------- Hardware specific routines ------------------------- */
143 * Hardware Cyber2000 Acceleration
145 static void
146 cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
148 struct cfb_info *cfb = (struct cfb_info *)info;
149 unsigned long dst, col;
151 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
152 cfb_fillrect(info, rect);
153 return;
156 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
157 cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
158 cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
160 col = rect->color;
161 if (cfb->fb.var.bits_per_pixel > 8)
162 col = ((u32 *)cfb->fb.pseudo_palette)[col];
163 cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
165 dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
166 if (cfb->fb.var.bits_per_pixel == 24) {
167 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
168 dst *= 3;
171 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
172 cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
173 cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
174 cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
177 static void
178 cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
180 struct cfb_info *cfb = (struct cfb_info *)info;
181 unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
182 unsigned long src, dst;
184 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
185 cfb_copyarea(info, region);
186 return;
189 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
190 cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
191 cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
193 src = region->sx + region->sy * cfb->fb.var.xres_virtual;
194 dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
196 if (region->sx < region->dx) {
197 src += region->width - 1;
198 dst += region->width - 1;
199 cmd |= CO_CMD_L_INC_LEFT;
202 if (region->sy < region->dy) {
203 src += (region->height - 1) * cfb->fb.var.xres_virtual;
204 dst += (region->height - 1) * cfb->fb.var.xres_virtual;
205 cmd |= CO_CMD_L_INC_UP;
208 if (cfb->fb.var.bits_per_pixel == 24) {
209 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
210 src *= 3;
211 dst *= 3;
213 cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
214 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
215 cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
216 cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
217 cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
218 CO_REG_CMD_H, cfb);
221 static void
222 cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
224 cfb_imageblit(info, image);
225 return;
228 static int cyber2000fb_sync(struct fb_info *info)
230 struct cfb_info *cfb = (struct cfb_info *)info;
231 int count = 100000;
233 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
234 return 0;
236 while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
237 if (!count--) {
238 debug_printf("accel_wait timed out\n");
239 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
240 break;
242 udelay(1);
244 return 0;
248 * ===========================================================================
251 static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
253 u_int mask = (1 << bf->length) - 1;
255 return (val >> (16 - bf->length) & mask) << bf->offset;
259 * Set a single color register. Return != 0 for invalid regno.
261 static int
262 cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
263 u_int transp, struct fb_info *info)
265 struct cfb_info *cfb = (struct cfb_info *)info;
266 struct fb_var_screeninfo *var = &cfb->fb.var;
267 u32 pseudo_val;
268 int ret = 1;
270 switch (cfb->fb.fix.visual) {
271 default:
272 return 1;
275 * Pseudocolour:
276 * 8 8
277 * pixel --/--+--/--> red lut --> red dac
278 * | 8
279 * +--/--> green lut --> green dac
280 * | 8
281 * +--/--> blue lut --> blue dac
283 case FB_VISUAL_PSEUDOCOLOR:
284 if (regno >= NR_PALETTE)
285 return 1;
287 red >>= 8;
288 green >>= 8;
289 blue >>= 8;
291 cfb->palette[regno].red = red;
292 cfb->palette[regno].green = green;
293 cfb->palette[regno].blue = blue;
295 cyber2000fb_writeb(regno, 0x3c8, cfb);
296 cyber2000fb_writeb(red, 0x3c9, cfb);
297 cyber2000fb_writeb(green, 0x3c9, cfb);
298 cyber2000fb_writeb(blue, 0x3c9, cfb);
299 return 0;
302 * Direct colour:
303 * n rl
304 * pixel --/--+--/--> red lut --> red dac
305 * | gl
306 * +--/--> green lut --> green dac
307 * | bl
308 * +--/--> blue lut --> blue dac
309 * n = bpp, rl = red length, gl = green length, bl = blue length
311 case FB_VISUAL_DIRECTCOLOR:
312 red >>= 8;
313 green >>= 8;
314 blue >>= 8;
316 if (var->green.length == 6 && regno < 64) {
317 cfb->palette[regno << 2].green = green;
320 * The 6 bits of the green component are applied
321 * to the high 6 bits of the LUT.
323 cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
324 cyber2000fb_writeb(cfb->palette[regno >> 1].red,
325 0x3c9, cfb);
326 cyber2000fb_writeb(green, 0x3c9, cfb);
327 cyber2000fb_writeb(cfb->palette[regno >> 1].blue,
328 0x3c9, cfb);
330 green = cfb->palette[regno << 3].green;
332 ret = 0;
335 if (var->green.length >= 5 && regno < 32) {
336 cfb->palette[regno << 3].red = red;
337 cfb->palette[regno << 3].green = green;
338 cfb->palette[regno << 3].blue = blue;
341 * The 5 bits of each colour component are
342 * applied to the high 5 bits of the LUT.
344 cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
345 cyber2000fb_writeb(red, 0x3c9, cfb);
346 cyber2000fb_writeb(green, 0x3c9, cfb);
347 cyber2000fb_writeb(blue, 0x3c9, cfb);
348 ret = 0;
351 if (var->green.length == 4 && regno < 16) {
352 cfb->palette[regno << 4].red = red;
353 cfb->palette[regno << 4].green = green;
354 cfb->palette[regno << 4].blue = blue;
357 * The 5 bits of each colour component are
358 * applied to the high 5 bits of the LUT.
360 cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
361 cyber2000fb_writeb(red, 0x3c9, cfb);
362 cyber2000fb_writeb(green, 0x3c9, cfb);
363 cyber2000fb_writeb(blue, 0x3c9, cfb);
364 ret = 0;
368 * Since this is only used for the first 16 colours, we
369 * don't have to care about overflowing for regno >= 32
371 pseudo_val = regno << var->red.offset |
372 regno << var->green.offset |
373 regno << var->blue.offset;
374 break;
377 * True colour:
378 * n rl
379 * pixel --/--+--/--> red dac
380 * | gl
381 * +--/--> green dac
382 * | bl
383 * +--/--> blue dac
384 * n = bpp, rl = red length, gl = green length, bl = blue length
386 case FB_VISUAL_TRUECOLOR:
387 pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
388 pseudo_val |= convert_bitfield(red, &var->red);
389 pseudo_val |= convert_bitfield(green, &var->green);
390 pseudo_val |= convert_bitfield(blue, &var->blue);
391 break;
395 * Now set our pseudo palette for the CFB16/24/32 drivers.
397 if (regno < 16)
398 ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
400 return ret;
403 struct par_info {
405 * Hardware
407 u_char clock_mult;
408 u_char clock_div;
409 u_char extseqmisc;
410 u_char co_pixfmt;
411 u_char crtc_ofl;
412 u_char crtc[19];
413 u_int width;
414 u_int pitch;
415 u_int fetch;
418 * Other
420 u_char ramdac;
423 static const u_char crtc_idx[] = {
424 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
425 0x08, 0x09,
426 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
429 static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
431 unsigned int i;
432 unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
434 cyber2000fb_writeb(0x56, 0x3ce, cfb);
435 i = cyber2000fb_readb(0x3cf, cfb);
436 cyber2000fb_writeb(i | 4, 0x3cf, cfb);
437 cyber2000fb_writeb(val, 0x3c6, cfb);
438 cyber2000fb_writeb(i, 0x3cf, cfb);
441 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
443 u_int i;
446 * Blank palette
448 for (i = 0; i < NR_PALETTE; i++) {
449 cyber2000fb_writeb(i, 0x3c8, cfb);
450 cyber2000fb_writeb(0, 0x3c9, cfb);
451 cyber2000fb_writeb(0, 0x3c9, cfb);
452 cyber2000fb_writeb(0, 0x3c9, cfb);
455 cyber2000fb_writeb(0xef, 0x3c2, cfb);
456 cyber2000_crtcw(0x11, 0x0b, cfb);
457 cyber2000_attrw(0x11, 0x00, cfb);
459 cyber2000_seqw(0x00, 0x01, cfb);
460 cyber2000_seqw(0x01, 0x01, cfb);
461 cyber2000_seqw(0x02, 0x0f, cfb);
462 cyber2000_seqw(0x03, 0x00, cfb);
463 cyber2000_seqw(0x04, 0x0e, cfb);
464 cyber2000_seqw(0x00, 0x03, cfb);
466 for (i = 0; i < sizeof(crtc_idx); i++)
467 cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
469 for (i = 0x0a; i < 0x10; i++)
470 cyber2000_crtcw(i, 0, cfb);
472 cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
473 cyber2000_grphw(0x00, 0x00, cfb);
474 cyber2000_grphw(0x01, 0x00, cfb);
475 cyber2000_grphw(0x02, 0x00, cfb);
476 cyber2000_grphw(0x03, 0x00, cfb);
477 cyber2000_grphw(0x04, 0x00, cfb);
478 cyber2000_grphw(0x05, 0x60, cfb);
479 cyber2000_grphw(0x06, 0x05, cfb);
480 cyber2000_grphw(0x07, 0x0f, cfb);
481 cyber2000_grphw(0x08, 0xff, cfb);
483 /* Attribute controller registers */
484 for (i = 0; i < 16; i++)
485 cyber2000_attrw(i, i, cfb);
487 cyber2000_attrw(0x10, 0x01, cfb);
488 cyber2000_attrw(0x11, 0x00, cfb);
489 cyber2000_attrw(0x12, 0x0f, cfb);
490 cyber2000_attrw(0x13, 0x00, cfb);
491 cyber2000_attrw(0x14, 0x00, cfb);
493 /* PLL registers */
494 cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
495 cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
496 cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
497 cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
498 cyber2000_grphw(0x90, 0x01, cfb);
499 cyber2000_grphw(0xb9, 0x80, cfb);
500 cyber2000_grphw(0xb9, 0x00, cfb);
502 cfb->ramdac_ctrl = hw->ramdac;
503 cyber2000fb_write_ramdac_ctrl(cfb);
505 cyber2000fb_writeb(0x20, 0x3c0, cfb);
506 cyber2000fb_writeb(0xff, 0x3c6, cfb);
508 cyber2000_grphw(0x14, hw->fetch, cfb);
509 cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
510 ((hw->pitch >> 4) & 0x30), cfb);
511 cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
514 * Set up accelerator registers
516 cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
517 cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
518 cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
521 static inline int
522 cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
524 u_int base = var->yoffset * var->xres_virtual + var->xoffset;
526 base *= var->bits_per_pixel;
529 * Convert to bytes and shift two extra bits because DAC
530 * can only start on 4 byte aligned data.
532 base >>= 5;
534 if (base >= 1 << 20)
535 return -EINVAL;
537 cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
538 cyber2000_crtcw(0x0c, base >> 8, cfb);
539 cyber2000_crtcw(0x0d, base, cfb);
541 return 0;
544 static int
545 cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
546 struct fb_var_screeninfo *var)
548 u_int Htotal, Hblankend, Hsyncend;
549 u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
550 #define ENCODE_BIT(v, b1, m, b2) ((((v) >> (b1)) & (m)) << (b2))
552 hw->crtc[13] = hw->pitch;
553 hw->crtc[17] = 0xe3;
554 hw->crtc[14] = 0;
555 hw->crtc[8] = 0;
557 Htotal = var->xres + var->right_margin +
558 var->hsync_len + var->left_margin;
560 if (Htotal > 2080)
561 return -EINVAL;
563 hw->crtc[0] = (Htotal >> 3) - 5;
564 hw->crtc[1] = (var->xres >> 3) - 1;
565 hw->crtc[2] = var->xres >> 3;
566 hw->crtc[4] = (var->xres + var->right_margin) >> 3;
568 Hblankend = (Htotal - 4 * 8) >> 3;
570 hw->crtc[3] = ENCODE_BIT(Hblankend, 0, 0x1f, 0) |
571 ENCODE_BIT(1, 0, 0x01, 7);
573 Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3;
575 hw->crtc[5] = ENCODE_BIT(Hsyncend, 0, 0x1f, 0) |
576 ENCODE_BIT(Hblankend, 5, 0x01, 7);
578 Vdispend = var->yres - 1;
579 Vsyncstart = var->yres + var->lower_margin;
580 Vsyncend = var->yres + var->lower_margin + var->vsync_len;
581 Vtotal = var->yres + var->lower_margin + var->vsync_len +
582 var->upper_margin - 2;
584 if (Vtotal > 2047)
585 return -EINVAL;
587 Vblankstart = var->yres + 6;
588 Vblankend = Vtotal - 10;
590 hw->crtc[6] = Vtotal;
591 hw->crtc[7] = ENCODE_BIT(Vtotal, 8, 0x01, 0) |
592 ENCODE_BIT(Vdispend, 8, 0x01, 1) |
593 ENCODE_BIT(Vsyncstart, 8, 0x01, 2) |
594 ENCODE_BIT(Vblankstart, 8, 0x01, 3) |
595 ENCODE_BIT(1, 0, 0x01, 4) |
596 ENCODE_BIT(Vtotal, 9, 0x01, 5) |
597 ENCODE_BIT(Vdispend, 9, 0x01, 6) |
598 ENCODE_BIT(Vsyncstart, 9, 0x01, 7);
599 hw->crtc[9] = ENCODE_BIT(0, 0, 0x1f, 0) |
600 ENCODE_BIT(Vblankstart, 9, 0x01, 5) |
601 ENCODE_BIT(1, 0, 0x01, 6);
602 hw->crtc[10] = Vsyncstart;
603 hw->crtc[11] = ENCODE_BIT(Vsyncend, 0, 0x0f, 0) |
604 ENCODE_BIT(1, 0, 0x01, 7);
605 hw->crtc[12] = Vdispend;
606 hw->crtc[15] = Vblankstart;
607 hw->crtc[16] = Vblankend;
608 hw->crtc[18] = 0xff;
611 * overflow - graphics reg 0x11
612 * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
613 * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
615 hw->crtc_ofl =
616 ENCODE_BIT(Vtotal, 10, 0x01, 0) |
617 ENCODE_BIT(Vdispend, 10, 0x01, 1) |
618 ENCODE_BIT(Vsyncstart, 10, 0x01, 2) |
619 ENCODE_BIT(Vblankstart, 10, 0x01, 3) |
620 EXT_CRT_VRTOFL_LINECOMP10;
622 /* woody: set the interlaced bit... */
623 /* FIXME: what about doublescan? */
624 if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
625 hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
627 return 0;
631 * The following was discovered by a good monitor, bit twiddling, theorising
632 * and but mostly luck. Strangely, it looks like everyone elses' PLL!
634 * Clock registers:
635 * fclock = fpll / div2
636 * fpll = fref * mult / div1
637 * where:
638 * fref = 14.318MHz (69842ps)
639 * mult = reg0xb0.7:0
640 * div1 = (reg0xb1.5:0 + 1)
641 * div2 = 2^(reg0xb1.7:6)
642 * fpll should be between 115 and 260 MHz
643 * (8696ps and 3846ps)
645 static int
646 cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
647 struct fb_var_screeninfo *var)
649 u_long pll_ps = var->pixclock;
650 const u_long ref_ps = cfb->ref_ps;
651 u_int div2, t_div1, best_div1, best_mult;
652 int best_diff;
653 int vco;
656 * Step 1:
657 * find div2 such that 115MHz < fpll < 260MHz
658 * and 0 <= div2 < 4
660 for (div2 = 0; div2 < 4; div2++) {
661 u_long new_pll;
663 new_pll = pll_ps / cfb->divisors[div2];
664 if (8696 > new_pll && new_pll > 3846) {
665 pll_ps = new_pll;
666 break;
670 if (div2 == 4)
671 return -EINVAL;
674 * Step 2:
675 * Given pll_ps and ref_ps, find:
676 * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
677 * where { 1 < best_div1 < 32, 1 < best_mult < 256 }
678 * pll_ps_calc = best_div1 / (ref_ps * best_mult)
680 best_diff = 0x7fffffff;
681 best_mult = 32;
682 best_div1 = 255;
683 for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) {
684 u_int rr, t_mult, t_pll_ps;
685 int diff;
688 * Find the multiplier for this divisor
690 rr = ref_ps * t_div1;
691 t_mult = (rr + pll_ps / 2) / pll_ps;
694 * Is the multiplier within the correct range?
696 if (t_mult > 256 || t_mult < 2)
697 continue;
700 * Calculate the actual clock period from this multiplier
701 * and divisor, and estimate the error.
703 t_pll_ps = (rr + t_mult / 2) / t_mult;
704 diff = pll_ps - t_pll_ps;
705 if (diff < 0)
706 diff = -diff;
708 if (diff < best_diff) {
709 best_diff = diff;
710 best_mult = t_mult;
711 best_div1 = t_div1;
715 * If we hit an exact value, there is no point in continuing.
717 if (diff == 0)
718 break;
722 * Step 3:
723 * combine values
725 hw->clock_mult = best_mult - 1;
726 hw->clock_div = div2 << 6 | (best_div1 - 1);
728 vco = ref_ps * best_div1 / best_mult;
729 if ((ref_ps == 40690) && (vco < 5556))
730 /* Set VFSEL when VCO > 180MHz (5.556 ps). */
731 hw->clock_div |= EXT_DCLK_DIV_VFSEL;
733 return 0;
737 * Set the User Defined Part of the Display
739 static int
740 cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
742 struct cfb_info *cfb = (struct cfb_info *)info;
743 struct par_info hw;
744 unsigned int mem;
745 int err;
747 var->transp.msb_right = 0;
748 var->red.msb_right = 0;
749 var->green.msb_right = 0;
750 var->blue.msb_right = 0;
751 var->transp.offset = 0;
752 var->transp.length = 0;
754 switch (var->bits_per_pixel) {
755 case 8: /* PSEUDOCOLOUR, 256 */
756 var->red.offset = 0;
757 var->red.length = 8;
758 var->green.offset = 0;
759 var->green.length = 8;
760 var->blue.offset = 0;
761 var->blue.length = 8;
762 break;
764 case 16:/* DIRECTCOLOUR, 64k or 32k */
765 switch (var->green.length) {
766 case 6: /* RGB565, 64k */
767 var->red.offset = 11;
768 var->red.length = 5;
769 var->green.offset = 5;
770 var->green.length = 6;
771 var->blue.offset = 0;
772 var->blue.length = 5;
773 break;
775 default:
776 case 5: /* RGB555, 32k */
777 var->red.offset = 10;
778 var->red.length = 5;
779 var->green.offset = 5;
780 var->green.length = 5;
781 var->blue.offset = 0;
782 var->blue.length = 5;
783 break;
785 case 4: /* RGB444, 4k + transparency? */
786 var->transp.offset = 12;
787 var->transp.length = 4;
788 var->red.offset = 8;
789 var->red.length = 4;
790 var->green.offset = 4;
791 var->green.length = 4;
792 var->blue.offset = 0;
793 var->blue.length = 4;
794 break;
796 break;
798 case 24:/* TRUECOLOUR, 16m */
799 var->red.offset = 16;
800 var->red.length = 8;
801 var->green.offset = 8;
802 var->green.length = 8;
803 var->blue.offset = 0;
804 var->blue.length = 8;
805 break;
807 case 32:/* TRUECOLOUR, 16m */
808 var->transp.offset = 24;
809 var->transp.length = 8;
810 var->red.offset = 16;
811 var->red.length = 8;
812 var->green.offset = 8;
813 var->green.length = 8;
814 var->blue.offset = 0;
815 var->blue.length = 8;
816 break;
818 default:
819 return -EINVAL;
822 mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
823 if (mem > cfb->fb.fix.smem_len)
824 var->yres_virtual = cfb->fb.fix.smem_len * 8 /
825 (var->bits_per_pixel * var->xres_virtual);
827 if (var->yres > var->yres_virtual)
828 var->yres = var->yres_virtual;
829 if (var->xres > var->xres_virtual)
830 var->xres = var->xres_virtual;
832 err = cyber2000fb_decode_clock(&hw, cfb, var);
833 if (err)
834 return err;
836 err = cyber2000fb_decode_crtc(&hw, cfb, var);
837 if (err)
838 return err;
840 return 0;
843 static int cyber2000fb_set_par(struct fb_info *info)
845 struct cfb_info *cfb = (struct cfb_info *)info;
846 struct fb_var_screeninfo *var = &cfb->fb.var;
847 struct par_info hw;
848 unsigned int mem;
850 hw.width = var->xres_virtual;
851 hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
853 switch (var->bits_per_pixel) {
854 case 8:
855 hw.co_pixfmt = CO_PIXFMT_8BPP;
856 hw.pitch = hw.width >> 3;
857 hw.extseqmisc = EXT_SEQ_MISC_8;
858 break;
860 case 16:
861 hw.co_pixfmt = CO_PIXFMT_16BPP;
862 hw.pitch = hw.width >> 2;
864 switch (var->green.length) {
865 case 6: /* RGB565, 64k */
866 hw.extseqmisc = EXT_SEQ_MISC_16_RGB565;
867 break;
868 case 5: /* RGB555, 32k */
869 hw.extseqmisc = EXT_SEQ_MISC_16_RGB555;
870 break;
871 case 4: /* RGB444, 4k + transparency? */
872 hw.extseqmisc = EXT_SEQ_MISC_16_RGB444;
873 break;
874 default:
875 BUG();
877 break;
879 case 24:/* TRUECOLOUR, 16m */
880 hw.co_pixfmt = CO_PIXFMT_24BPP;
881 hw.width *= 3;
882 hw.pitch = hw.width >> 3;
883 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
884 hw.extseqmisc = EXT_SEQ_MISC_24_RGB888;
885 break;
887 case 32:/* TRUECOLOUR, 16m */
888 hw.co_pixfmt = CO_PIXFMT_32BPP;
889 hw.pitch = hw.width >> 1;
890 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
891 hw.extseqmisc = EXT_SEQ_MISC_32;
892 break;
894 default:
895 BUG();
899 * Sigh, this is absolutely disgusting, but caused by
900 * the way the fbcon developers want to separate out
901 * the "checking" and the "setting" of the video mode.
903 * If the mode is not suitable for the hardware here,
904 * we can't prevent it being set by returning an error.
906 * In theory, since NetWinders contain just one VGA card,
907 * we should never end up hitting this problem.
909 BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
910 BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
912 hw.width -= 1;
913 hw.fetch = hw.pitch;
914 if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
915 hw.fetch <<= 1;
916 hw.fetch += 1;
918 cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
921 * Same here - if the size of the video mode exceeds the
922 * available RAM, we can't prevent this mode being set.
924 * In theory, since NetWinders contain just one VGA card,
925 * we should never end up hitting this problem.
927 mem = cfb->fb.fix.line_length * var->yres_virtual;
928 BUG_ON(mem > cfb->fb.fix.smem_len);
931 * 8bpp displays are always pseudo colour. 16bpp and above
932 * are direct colour or true colour, depending on whether
933 * the RAMDAC palettes are bypassed. (Direct colour has
934 * palettes, true colour does not.)
936 if (var->bits_per_pixel == 8)
937 cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
938 else if (hw.ramdac & RAMDAC_BYPASS)
939 cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
940 else
941 cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
943 cyber2000fb_set_timing(cfb, &hw);
944 cyber2000fb_update_start(cfb, var);
946 return 0;
950 * Pan or Wrap the Display
952 static int
953 cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
955 struct cfb_info *cfb = (struct cfb_info *)info;
957 if (cyber2000fb_update_start(cfb, var))
958 return -EINVAL;
960 cfb->fb.var.xoffset = var->xoffset;
961 cfb->fb.var.yoffset = var->yoffset;
963 if (var->vmode & FB_VMODE_YWRAP) {
964 cfb->fb.var.vmode |= FB_VMODE_YWRAP;
965 } else {
966 cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
969 return 0;
973 * (Un)Blank the display.
975 * Blank the screen if blank_mode != 0, else unblank. If
976 * blank == NULL then the caller blanks by setting the CLUT
977 * (Color Look Up Table) to all black. Return 0 if blanking
978 * succeeded, != 0 if un-/blanking failed due to e.g. a
979 * video mode which doesn't support it. Implements VESA
980 * suspend and powerdown modes on hardware that supports
981 * disabling hsync/vsync:
982 * blank_mode == 2: suspend vsync
983 * blank_mode == 3: suspend hsync
984 * blank_mode == 4: powerdown
986 * wms...Enable VESA DMPS compatible powerdown mode
987 * run "setterm -powersave powerdown" to take advantage
989 static int cyber2000fb_blank(int blank, struct fb_info *info)
991 struct cfb_info *cfb = (struct cfb_info *)info;
992 unsigned int sync = 0;
993 int i;
995 switch (blank) {
996 case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
997 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
998 break;
999 case FB_BLANK_HSYNC_SUSPEND: /* hsync off */
1000 sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
1001 break;
1002 case FB_BLANK_VSYNC_SUSPEND: /* vsync off */
1003 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
1004 break;
1005 case FB_BLANK_NORMAL: /* soft blank */
1006 default: /* unblank */
1007 break;
1010 cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
1012 if (blank <= 1) {
1013 /* turn on ramdacs */
1014 cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1015 RAMDAC_RAMPWRDN);
1016 cyber2000fb_write_ramdac_ctrl(cfb);
1020 * Soft blank/unblank the display.
1022 if (blank) { /* soft blank */
1023 for (i = 0; i < NR_PALETTE; i++) {
1024 cyber2000fb_writeb(i, 0x3c8, cfb);
1025 cyber2000fb_writeb(0, 0x3c9, cfb);
1026 cyber2000fb_writeb(0, 0x3c9, cfb);
1027 cyber2000fb_writeb(0, 0x3c9, cfb);
1029 } else { /* unblank */
1030 for (i = 0; i < NR_PALETTE; i++) {
1031 cyber2000fb_writeb(i, 0x3c8, cfb);
1032 cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
1033 cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
1034 cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
1038 if (blank >= 2) {
1039 /* turn off ramdacs */
1040 cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1041 RAMDAC_RAMPWRDN;
1042 cyber2000fb_write_ramdac_ctrl(cfb);
1045 return 0;
1048 static struct fb_ops cyber2000fb_ops = {
1049 .owner = THIS_MODULE,
1050 .fb_check_var = cyber2000fb_check_var,
1051 .fb_set_par = cyber2000fb_set_par,
1052 .fb_setcolreg = cyber2000fb_setcolreg,
1053 .fb_blank = cyber2000fb_blank,
1054 .fb_pan_display = cyber2000fb_pan_display,
1055 .fb_fillrect = cyber2000fb_fillrect,
1056 .fb_copyarea = cyber2000fb_copyarea,
1057 .fb_imageblit = cyber2000fb_imageblit,
1058 .fb_sync = cyber2000fb_sync,
1062 * This is the only "static" reference to the internal data structures
1063 * of this driver. It is here solely at the moment to support the other
1064 * CyberPro modules external to this driver.
1066 static struct cfb_info *int_cfb_info;
1069 * Enable access to the extended registers
1071 void cyber2000fb_enable_extregs(struct cfb_info *cfb)
1073 cfb->func_use_count += 1;
1075 if (cfb->func_use_count == 1) {
1076 int old;
1078 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1079 old |= EXT_FUNC_CTL_EXTREGENBL;
1080 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1083 EXPORT_SYMBOL(cyber2000fb_enable_extregs);
1086 * Disable access to the extended registers
1088 void cyber2000fb_disable_extregs(struct cfb_info *cfb)
1090 if (cfb->func_use_count == 1) {
1091 int old;
1093 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1094 old &= ~EXT_FUNC_CTL_EXTREGENBL;
1095 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1098 if (cfb->func_use_count == 0)
1099 printk(KERN_ERR "disable_extregs: count = 0\n");
1100 else
1101 cfb->func_use_count -= 1;
1103 EXPORT_SYMBOL(cyber2000fb_disable_extregs);
1105 void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var)
1107 memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo));
1109 EXPORT_SYMBOL(cyber2000fb_get_fb_var);
1112 * Attach a capture/tv driver to the core CyberX0X0 driver.
1114 int cyber2000fb_attach(struct cyberpro_info *info, int idx)
1116 if (int_cfb_info != NULL) {
1117 info->dev = int_cfb_info->dev;
1118 info->regs = int_cfb_info->regs;
1119 info->fb = int_cfb_info->fb.screen_base;
1120 info->fb_size = int_cfb_info->fb.fix.smem_len;
1121 info->enable_extregs = cyber2000fb_enable_extregs;
1122 info->disable_extregs = cyber2000fb_disable_extregs;
1123 info->info = int_cfb_info;
1125 strlcpy(info->dev_name, int_cfb_info->fb.fix.id,
1126 sizeof(info->dev_name));
1129 return int_cfb_info != NULL;
1131 EXPORT_SYMBOL(cyber2000fb_attach);
1134 * Detach a capture/tv driver from the core CyberX0X0 driver.
1136 void cyber2000fb_detach(int idx)
1139 EXPORT_SYMBOL(cyber2000fb_detach);
1142 * These parameters give
1143 * 640x480, hsync 31.5kHz, vsync 60Hz
1145 static struct fb_videomode __devinitdata cyber2000fb_default_mode = {
1146 .refresh = 60,
1147 .xres = 640,
1148 .yres = 480,
1149 .pixclock = 39722,
1150 .left_margin = 56,
1151 .right_margin = 16,
1152 .upper_margin = 34,
1153 .lower_margin = 9,
1154 .hsync_len = 88,
1155 .vsync_len = 2,
1156 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
1157 .vmode = FB_VMODE_NONINTERLACED
1160 static char igs_regs[] = {
1161 EXT_CRT_IRQ, 0,
1162 EXT_CRT_TEST, 0,
1163 EXT_SYNC_CTL, 0,
1164 EXT_SEG_WRITE_PTR, 0,
1165 EXT_SEG_READ_PTR, 0,
1166 EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE |
1167 EXT_BIU_MISC_COP_ENABLE |
1168 EXT_BIU_MISC_COP_BFC,
1169 EXT_FUNC_CTL, 0,
1170 CURS_H_START, 0,
1171 CURS_H_START + 1, 0,
1172 CURS_H_PRESET, 0,
1173 CURS_V_START, 0,
1174 CURS_V_START + 1, 0,
1175 CURS_V_PRESET, 0,
1176 CURS_CTL, 0,
1177 EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT,
1178 EXT_OVERSCAN_RED, 0,
1179 EXT_OVERSCAN_GREEN, 0,
1180 EXT_OVERSCAN_BLUE, 0,
1182 /* some of these are questionable when we have a BIOS */
1183 EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK |
1184 EXT_MEM_CTL0_RAS_1 |
1185 EXT_MEM_CTL0_MULTCAS,
1186 EXT_HIDDEN_CTL1, 0x30,
1187 EXT_FIFO_CTL, 0x0b,
1188 EXT_FIFO_CTL + 1, 0x17,
1189 0x76, 0x00,
1190 EXT_HIDDEN_CTL4, 0xc8
1194 * Initialise the CyberPro hardware. On the CyberPro5XXXX,
1195 * ensure that we're using the correct PLL (5XXX's may be
1196 * programmed to use an additional set of PLLs.)
1198 static void cyberpro_init_hw(struct cfb_info *cfb)
1200 int i;
1202 for (i = 0; i < sizeof(igs_regs); i += 2)
1203 cyber2000_grphw(igs_regs[i], igs_regs[i + 1], cfb);
1205 if (cfb->id == ID_CYBERPRO_5000) {
1206 unsigned char val;
1207 cyber2000fb_writeb(0xba, 0x3ce, cfb);
1208 val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
1209 cyber2000fb_writeb(val, 0x3cf, cfb);
1213 static struct cfb_info __devinit *cyberpro_alloc_fb_info(unsigned int id,
1214 char *name)
1216 struct cfb_info *cfb;
1218 cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL);
1219 if (!cfb)
1220 return NULL;
1223 cfb->id = id;
1225 if (id == ID_CYBERPRO_5000)
1226 cfb->ref_ps = 40690; /* 24.576 MHz */
1227 else
1228 cfb->ref_ps = 69842; /* 14.31818 MHz (69841?) */
1230 cfb->divisors[0] = 1;
1231 cfb->divisors[1] = 2;
1232 cfb->divisors[2] = 4;
1234 if (id == ID_CYBERPRO_2000)
1235 cfb->divisors[3] = 8;
1236 else
1237 cfb->divisors[3] = 6;
1239 strcpy(cfb->fb.fix.id, name);
1241 cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
1242 cfb->fb.fix.type_aux = 0;
1243 cfb->fb.fix.xpanstep = 0;
1244 cfb->fb.fix.ypanstep = 1;
1245 cfb->fb.fix.ywrapstep = 0;
1247 switch (id) {
1248 case ID_IGA_1682:
1249 cfb->fb.fix.accel = 0;
1250 break;
1252 case ID_CYBERPRO_2000:
1253 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
1254 break;
1256 case ID_CYBERPRO_2010:
1257 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
1258 break;
1260 case ID_CYBERPRO_5000:
1261 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
1262 break;
1265 cfb->fb.var.nonstd = 0;
1266 cfb->fb.var.activate = FB_ACTIVATE_NOW;
1267 cfb->fb.var.height = -1;
1268 cfb->fb.var.width = -1;
1269 cfb->fb.var.accel_flags = FB_ACCELF_TEXT;
1271 cfb->fb.fbops = &cyber2000fb_ops;
1272 cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
1273 cfb->fb.pseudo_palette = cfb->pseudo_palette;
1275 fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
1277 return cfb;
1280 static void cyberpro_free_fb_info(struct cfb_info *cfb)
1282 if (cfb) {
1284 * Free the colourmap
1286 fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
1288 kfree(cfb);
1293 * Parse Cyber2000fb options. Usage:
1294 * video=cyber2000:font:fontname
1296 #ifndef MODULE
1297 static int cyber2000fb_setup(char *options)
1299 char *opt;
1301 if (!options || !*options)
1302 return 0;
1304 while ((opt = strsep(&options, ",")) != NULL) {
1305 if (!*opt)
1306 continue;
1308 if (strncmp(opt, "font:", 5) == 0) {
1309 static char default_font_storage[40];
1311 strlcpy(default_font_storage, opt + 5,
1312 sizeof(default_font_storage));
1313 default_font = default_font_storage;
1314 continue;
1317 printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
1319 return 0;
1321 #endif /* MODULE */
1324 * The CyberPro chips can be placed on many different bus types.
1325 * This probe function is common to all bus types. The bus-specific
1326 * probe function is expected to have:
1327 * - enabled access to the linear memory region
1328 * - memory mapped access to the registers
1329 * - initialised mem_ctl1 and mem_ctl2 appropriately.
1331 static int __devinit cyberpro_common_probe(struct cfb_info *cfb)
1333 u_long smem_size;
1334 u_int h_sync, v_sync;
1335 int err;
1337 cyberpro_init_hw(cfb);
1340 * Get the video RAM size and width from the VGA register.
1341 * This should have been already initialised by the BIOS,
1342 * but if it's garbage, claim default 1MB VRAM (woody)
1344 cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
1345 cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
1348 * Determine the size of the memory.
1350 switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
1351 case MEM_CTL2_SIZE_4MB:
1352 smem_size = 0x00400000;
1353 break;
1354 case MEM_CTL2_SIZE_2MB:
1355 smem_size = 0x00200000;
1356 break;
1357 case MEM_CTL2_SIZE_1MB:
1358 smem_size = 0x00100000;
1359 break;
1360 default:
1361 smem_size = 0x00100000;
1362 break;
1365 cfb->fb.fix.smem_len = smem_size;
1366 cfb->fb.fix.mmio_len = MMIO_SIZE;
1367 cfb->fb.screen_base = cfb->region;
1369 err = -EINVAL;
1370 if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
1371 &cyber2000fb_default_mode, 8)) {
1372 printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id);
1373 goto failed;
1376 cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
1377 (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
1379 if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
1380 cfb->fb.var.yres_virtual = cfb->fb.var.yres;
1382 /* fb_set_var(&cfb->fb.var, -1, &cfb->fb); */
1385 * Calculate the hsync and vsync frequencies. Note that
1386 * we split the 1e12 constant up so that we can preserve
1387 * the precision and fit the results into 32-bit registers.
1388 * (1953125000 * 512 = 1e12)
1390 h_sync = 1953125000 / cfb->fb.var.pixclock;
1391 h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
1392 cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
1393 v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
1394 cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
1396 printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
1397 cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
1398 cfb->fb.var.xres, cfb->fb.var.yres,
1399 h_sync / 1000, h_sync % 1000, v_sync);
1401 if (cfb->dev)
1402 cfb->fb.device = &cfb->dev->dev;
1403 err = register_framebuffer(&cfb->fb);
1405 failed:
1406 return err;
1409 static void cyberpro_common_resume(struct cfb_info *cfb)
1411 cyberpro_init_hw(cfb);
1414 * Reprogram the MEM_CTL1 and MEM_CTL2 registers
1416 cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
1417 cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
1420 * Restore the old video mode and the palette.
1421 * We also need to tell fbcon to redraw the console.
1423 cyber2000fb_set_par(&cfb->fb);
1426 #ifdef CONFIG_ARCH_SHARK
1428 #include <mach/framebuffer.h>
1430 static int __devinit cyberpro_vl_probe(void)
1432 struct cfb_info *cfb;
1433 int err = -ENOMEM;
1435 if (!request_mem_region(FB_START, FB_SIZE, "CyberPro2010"))
1436 return err;
1438 cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
1439 if (!cfb)
1440 goto failed_release;
1442 cfb->dev = NULL;
1443 cfb->region = ioremap(FB_START, FB_SIZE);
1444 if (!cfb->region)
1445 goto failed_ioremap;
1447 cfb->regs = cfb->region + MMIO_OFFSET;
1448 cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
1449 cfb->fb.fix.smem_start = FB_START;
1452 * Bring up the hardware. This is expected to enable access
1453 * to the linear memory region, and allow access to the memory
1454 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
1455 * initialised.
1457 cyber2000fb_writeb(0x18, 0x46e8, cfb);
1458 cyber2000fb_writeb(0x01, 0x102, cfb);
1459 cyber2000fb_writeb(0x08, 0x46e8, cfb);
1460 cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
1461 cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
1463 cfb->mclk_mult = 0xdb;
1464 cfb->mclk_div = 0x54;
1466 err = cyberpro_common_probe(cfb);
1467 if (err)
1468 goto failed;
1470 if (int_cfb_info == NULL)
1471 int_cfb_info = cfb;
1473 return 0;
1475 failed:
1476 iounmap(cfb->region);
1477 failed_ioremap:
1478 cyberpro_free_fb_info(cfb);
1479 failed_release:
1480 release_mem_region(FB_START, FB_SIZE);
1482 return err;
1484 #endif /* CONFIG_ARCH_SHARK */
1487 * PCI specific support.
1489 #ifdef CONFIG_PCI
1491 * We need to wake up the CyberPro, and make sure its in linear memory
1492 * mode. Unfortunately, this is specific to the platform and card that
1493 * we are running on.
1495 * On x86 and ARM, should we be initialising the CyberPro first via the
1496 * IO registers, and then the MMIO registers to catch all cases? Can we
1497 * end up in the situation where the chip is in MMIO mode, but not awake
1498 * on an x86 system?
1500 static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
1502 unsigned char val;
1504 #if defined(__sparc_v9__)
1505 #error "You lose, consult DaveM."
1506 #elif defined(__sparc__)
1508 * SPARC does not have an "outb" instruction, so we generate
1509 * I/O cycles storing into a reserved memory space at
1510 * physical address 0x3000000
1512 unsigned char __iomem *iop;
1514 iop = ioremap(0x3000000, 0x5000);
1515 if (iop == NULL) {
1516 printk(KERN_ERR "iga5000: cannot map I/O\n");
1517 return -ENOMEM;
1520 writeb(0x18, iop + 0x46e8);
1521 writeb(0x01, iop + 0x102);
1522 writeb(0x08, iop + 0x46e8);
1523 writeb(EXT_BIU_MISC, iop + 0x3ce);
1524 writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
1526 iounmap(iop);
1527 #else
1529 * Most other machine types are "normal", so
1530 * we use the standard IO-based wakeup.
1532 outb(0x18, 0x46e8);
1533 outb(0x01, 0x102);
1534 outb(0x08, 0x46e8);
1535 outb(EXT_BIU_MISC, 0x3ce);
1536 outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
1537 #endif
1540 * Allow the CyberPro to accept PCI burst accesses
1542 if (cfb->id == ID_CYBERPRO_2010) {
1543 printk(KERN_INFO "%s: NOT enabling PCI bursts\n",
1544 cfb->fb.fix.id);
1545 } else {
1546 val = cyber2000_grphr(EXT_BUS_CTL, cfb);
1547 if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
1548 printk(KERN_INFO "%s: enabling PCI bursts\n",
1549 cfb->fb.fix.id);
1551 val |= EXT_BUS_CTL_PCIBURST_WRITE;
1553 if (cfb->id == ID_CYBERPRO_5000)
1554 val |= EXT_BUS_CTL_PCIBURST_READ;
1556 cyber2000_grphw(EXT_BUS_CTL, val, cfb);
1560 return 0;
1563 static int __devinit
1564 cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
1566 struct cfb_info *cfb;
1567 char name[16];
1568 int err;
1570 sprintf(name, "CyberPro%4X", id->device);
1572 err = pci_enable_device(dev);
1573 if (err)
1574 return err;
1576 err = pci_request_regions(dev, name);
1577 if (err)
1578 return err;
1580 err = -ENOMEM;
1581 cfb = cyberpro_alloc_fb_info(id->driver_data, name);
1582 if (!cfb)
1583 goto failed_release;
1585 cfb->dev = dev;
1586 cfb->region = pci_ioremap_bar(dev, 0);
1587 if (!cfb->region)
1588 goto failed_ioremap;
1590 cfb->regs = cfb->region + MMIO_OFFSET;
1591 cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
1592 cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
1595 * Bring up the hardware. This is expected to enable access
1596 * to the linear memory region, and allow access to the memory
1597 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
1598 * initialised.
1600 err = cyberpro_pci_enable_mmio(cfb);
1601 if (err)
1602 goto failed;
1605 * Use MCLK from BIOS. FIXME: what about hotplug?
1607 cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
1608 cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb);
1610 #ifdef __arm__
1612 * MCLK on the NetWinder and the Shark is fixed at 75MHz
1614 if (machine_is_netwinder()) {
1615 cfb->mclk_mult = 0xdb;
1616 cfb->mclk_div = 0x54;
1618 #endif
1620 err = cyberpro_common_probe(cfb);
1621 if (err)
1622 goto failed;
1625 * Our driver data
1627 pci_set_drvdata(dev, cfb);
1628 if (int_cfb_info == NULL)
1629 int_cfb_info = cfb;
1631 return 0;
1633 failed:
1634 iounmap(cfb->region);
1635 failed_ioremap:
1636 cyberpro_free_fb_info(cfb);
1637 failed_release:
1638 pci_release_regions(dev);
1640 return err;
1643 static void __devexit cyberpro_pci_remove(struct pci_dev *dev)
1645 struct cfb_info *cfb = pci_get_drvdata(dev);
1647 if (cfb) {
1649 * If unregister_framebuffer fails, then
1650 * we will be leaving hooks that could cause
1651 * oopsen laying around.
1653 if (unregister_framebuffer(&cfb->fb))
1654 printk(KERN_WARNING "%s: danger Will Robinson, "
1655 "danger danger! Oopsen imminent!\n",
1656 cfb->fb.fix.id);
1657 iounmap(cfb->region);
1658 cyberpro_free_fb_info(cfb);
1661 * Ensure that the driver data is no longer
1662 * valid.
1664 pci_set_drvdata(dev, NULL);
1665 if (cfb == int_cfb_info)
1666 int_cfb_info = NULL;
1668 pci_release_regions(dev);
1672 static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state)
1674 return 0;
1678 * Re-initialise the CyberPro hardware
1680 static int cyberpro_pci_resume(struct pci_dev *dev)
1682 struct cfb_info *cfb = pci_get_drvdata(dev);
1684 if (cfb) {
1685 cyberpro_pci_enable_mmio(cfb);
1686 cyberpro_common_resume(cfb);
1689 return 0;
1692 static struct pci_device_id cyberpro_pci_table[] = {
1693 /* Not yet
1694 * { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
1695 * PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
1697 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
1698 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
1699 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
1700 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
1701 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
1702 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
1703 { 0, }
1706 MODULE_DEVICE_TABLE(pci, cyberpro_pci_table);
1708 static struct pci_driver cyberpro_driver = {
1709 .name = "CyberPro",
1710 .probe = cyberpro_pci_probe,
1711 .remove = __devexit_p(cyberpro_pci_remove),
1712 .suspend = cyberpro_pci_suspend,
1713 .resume = cyberpro_pci_resume,
1714 .id_table = cyberpro_pci_table
1716 #endif
1719 * I don't think we can use the "module_init" stuff here because
1720 * the fbcon stuff may not be initialised yet. Hence the #ifdef
1721 * around module_init.
1723 * Tony: "module_init" is now required
1725 static int __init cyber2000fb_init(void)
1727 int ret = -1, err;
1729 #ifndef MODULE
1730 char *option = NULL;
1732 if (fb_get_options("cyber2000fb", &option))
1733 return -ENODEV;
1734 cyber2000fb_setup(option);
1735 #endif
1737 #ifdef CONFIG_ARCH_SHARK
1738 err = cyberpro_vl_probe();
1739 if (!err)
1740 ret = 0;
1741 #endif
1742 #ifdef CONFIG_PCI
1743 err = pci_register_driver(&cyberpro_driver);
1744 if (!err)
1745 ret = 0;
1746 #endif
1748 return ret ? err : 0;
1750 module_init(cyber2000fb_init);
1752 #ifndef CONFIG_ARCH_SHARK
1753 static void __exit cyberpro_exit(void)
1755 pci_unregister_driver(&cyberpro_driver);
1757 module_exit(cyberpro_exit);
1758 #endif
1760 MODULE_AUTHOR("Russell King");
1761 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
1762 MODULE_LICENSE("GPL");