drivers/ide/au1xxx-ide.c

   1 /*
   2  * BRIEF MODULE DESCRIPTION
   3  * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
   4  *
   5  * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
   6  *
   7  * This program is free software; you can redistribute it and/or modify it under
   8  * the terms of the GNU General Public License as published by the Free Software
   9  * Foundation; either version 2 of the License, or (at your option) any later
  10  * version.
  11  *
  12  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
  13  * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
  14  * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
  15  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  16  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  17  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  18  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  19  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  20  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  21  * POSSIBILITY OF SUCH DAMAGE.
  22  *
  23  * You should have received a copy of the GNU General Public License along with
  24  * this program; if not, write to the Free Software Foundation, Inc.,
  25  * 675 Mass Ave, Cambridge, MA 02139, USA.
  26  *
  27  * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
  28  *       Interface and Linux Device Driver" Application Note.
  29  */
  30 #include <linux/types.h>
  31 #include <linux/module.h>
  32 #include <linux/kernel.h>
  33 #include <linux/delay.h>
  34 #include <linux/platform_device.h>
  35 #include <linux/init.h>
  36 #include <linux/ide.h>
  37 #include <linux/scatterlist.h>
  38
  39 #include <asm/mach-au1x00/au1xxx.h>
  40 #include <asm/mach-au1x00/au1xxx_dbdma.h>
  41 #include <asm/mach-au1x00/au1xxx_ide.h>
  42
  43 #define DRV_NAME        "au1200-ide"
  44 #define DRV_AUTHOR      "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
  45
  46 /* enable the burstmode in the dbdma */
  47 #define IDE_AU1XXX_BURSTMODE    1
  48
  49 static _auide_hwif auide_hwif;
  50
  51 #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
  52
  53 static inline void auide_insw(unsigned long port, void *addr, u32 count)
  54 {
  55         _auide_hwif *ahwif = &auide_hwif;
  56         chan_tab_t *ctp;
  57         au1x_ddma_desc_t *dp;
  58
  59         if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, virt_to_phys(addr),
  60                                    count << 1, DDMA_FLAGS_NOIE)) {
  61                 printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
  62                 return;
  63         }
  64         ctp = *((chan_tab_t **)ahwif->rx_chan);
  65         dp = ctp->cur_ptr;
  66         while (dp->dscr_cmd0 & DSCR_CMD0_V)
  67                 ;
  68         ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
  69 }
  70
  71 static inline void auide_outsw(unsigned long port, void *addr, u32 count)
  72 {
  73         _auide_hwif *ahwif = &auide_hwif;
  74         chan_tab_t *ctp;
  75         au1x_ddma_desc_t *dp;
  76
  77         if (!au1xxx_dbdma_put_source(ahwif->tx_chan, virt_to_phys(addr),
  78                                      count << 1, DDMA_FLAGS_NOIE)) {
  79                 printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
  80                 return;
  81         }
  82         ctp = *((chan_tab_t **)ahwif->tx_chan);
  83         dp = ctp->cur_ptr;
  84         while (dp->dscr_cmd0 & DSCR_CMD0_V)
  85                 ;
  86         ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
  87 }
  88
  89 static void au1xxx_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
  90                               void *buf, unsigned int len)
  91 {
  92         auide_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
  93 }
  94
  95 static void au1xxx_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
  96                                void *buf, unsigned int len)
  97 {
  98         auide_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
  99 }
 100 #endif
 101
 102 static void au1xxx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 103 {
 104         int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
 105
 106         switch (drive->pio_mode - XFER_PIO_0) {
 107         case 0:
 108                 mem_sttime = SBC_IDE_TIMING(PIO0);
 109
 110                 /* set configuration for RCS2# */
 111                 mem_stcfg |= TS_MASK;
 112                 mem_stcfg &= ~TCSOE_MASK;
 113                 mem_stcfg &= ~TOECS_MASK;
 114                 mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
 115                 break;
 116
 117         case 1:
 118                 mem_sttime = SBC_IDE_TIMING(PIO1);
 119
 120                 /* set configuration for RCS2# */
 121                 mem_stcfg |= TS_MASK;
 122                 mem_stcfg &= ~TCSOE_MASK;
 123                 mem_stcfg &= ~TOECS_MASK;
 124                 mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
 125                 break;
 126
 127         case 2:
 128                 mem_sttime = SBC_IDE_TIMING(PIO2);
 129
 130                 /* set configuration for RCS2# */
 131                 mem_stcfg &= ~TS_MASK;
 132                 mem_stcfg &= ~TCSOE_MASK;
 133                 mem_stcfg &= ~TOECS_MASK;
 134                 mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
 135                 break;
 136
 137         case 3:
 138                 mem_sttime = SBC_IDE_TIMING(PIO3);
 139
 140                 /* set configuration for RCS2# */
 141                 mem_stcfg &= ~TS_MASK;
 142                 mem_stcfg &= ~TCSOE_MASK;
 143                 mem_stcfg &= ~TOECS_MASK;
 144                 mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;
 145
 146                 break;
 147
 148         case 4:
 149                 mem_sttime = SBC_IDE_TIMING(PIO4);
 150
 151                 /* set configuration for RCS2# */
 152                 mem_stcfg &= ~TS_MASK;
 153                 mem_stcfg &= ~TCSOE_MASK;
 154                 mem_stcfg &= ~TOECS_MASK;
 155                 mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
 156                 break;
 157         }
 158
 159         au_writel(mem_sttime,MEM_STTIME2);
 160         au_writel(mem_stcfg,MEM_STCFG2);
 161 }
 162
 163 static void auide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 164 {
 165         int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
 166
 167         switch (drive->dma_mode) {
 168 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 169         case XFER_MW_DMA_2:
 170                 mem_sttime = SBC_IDE_TIMING(MDMA2);
 171
 172                 /* set configuration for RCS2# */
 173                 mem_stcfg &= ~TS_MASK;
 174                 mem_stcfg &= ~TCSOE_MASK;
 175                 mem_stcfg &= ~TOECS_MASK;
 176                 mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;
 177
 178                 break;
 179         case XFER_MW_DMA_1:
 180                 mem_sttime = SBC_IDE_TIMING(MDMA1);
 181
 182                 /* set configuration for RCS2# */
 183                 mem_stcfg &= ~TS_MASK;
 184                 mem_stcfg &= ~TCSOE_MASK;
 185                 mem_stcfg &= ~TOECS_MASK;
 186                 mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;
 187
 188                 break;
 189         case XFER_MW_DMA_0:
 190                 mem_sttime = SBC_IDE_TIMING(MDMA0);
 191
 192                 /* set configuration for RCS2# */
 193                 mem_stcfg |= TS_MASK;
 194                 mem_stcfg &= ~TCSOE_MASK;
 195                 mem_stcfg &= ~TOECS_MASK;
 196                 mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;
 197
 198                 break;
 199 #endif
 200         }
 201
 202         au_writel(mem_sttime,MEM_STTIME2);
 203         au_writel(mem_stcfg,MEM_STCFG2);
 204 }
 205
 206 /*
 207  * Multi-Word DMA + DbDMA functions
 208  */
 209
 210 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 211 static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 212 {
 213         ide_hwif_t *hwif = drive->hwif;
 214         _auide_hwif *ahwif = &auide_hwif;
 215         struct scatterlist *sg;
 216         int i = cmd->sg_nents, count = 0;
 217         int iswrite = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
 218
 219         /* Save for interrupt context */
 220         ahwif->drive = drive;
 221
 222         /* fill the descriptors */
 223         sg = hwif->sg_table;
 224         while (i && sg_dma_len(sg)) {
 225                 u32 cur_addr;
 226                 u32 cur_len;
 227
 228                 cur_addr = sg_dma_address(sg);
 229                 cur_len = sg_dma_len(sg);
 230
 231                 while (cur_len) {
 232                         u32 flags = DDMA_FLAGS_NOIE;
 233                         unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
 234
 235                         if (++count >= PRD_ENTRIES) {
 236                                 printk(KERN_WARNING "%s: DMA table too small\n",
 237                                        drive->name);
 238                                 return 0;
 239                         }
 240
 241                         /* Lets enable intr for the last descriptor only */
 242                         if (1==i)
 243                                 flags = DDMA_FLAGS_IE;
 244                         else
 245                                 flags = DDMA_FLAGS_NOIE;
 246
 247                         if (iswrite) {
 248                                 if (!au1xxx_dbdma_put_source(ahwif->tx_chan,
 249                                         sg_phys(sg), tc, flags)) {
 250                                         printk(KERN_ERR "%s failed %d\n",
 251                                                __func__, __LINE__);
 252                                 }
 253                         } else  {
 254                                 if (!au1xxx_dbdma_put_dest(ahwif->rx_chan,
 255                                         sg_phys(sg), tc, flags)) {
 256                                         printk(KERN_ERR "%s failed %d\n",
 257                                                __func__, __LINE__);
 258                                 }
 259                         }
 260
 261                         cur_addr += tc;
 262                         cur_len -= tc;
 263                 }
 264                 sg = sg_next(sg);
 265                 i--;
 266         }
 267
 268         if (count)
 269                 return 1;
 270
 271         return 0; /* revert to PIO for this request */
 272 }
 273
 274 static int auide_dma_end(ide_drive_t *drive)
 275 {
 276         return 0;
 277 }
 278
 279 static void auide_dma_start(ide_drive_t *drive )
 280 {
 281 }
 282
 283
 284 static int auide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 285 {
 286         if (auide_build_dmatable(drive, cmd) == 0)
 287                 return 1;
 288
 289         return 0;
 290 }
 291
 292 static int auide_dma_test_irq(ide_drive_t *drive)
 293 {
 294         /* If dbdma didn't execute the STOP command yet, the
 295          * active bit is still set
 296          */
 297         drive->waiting_for_dma++;
 298         if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
 299                 printk(KERN_WARNING "%s: timeout waiting for ddma to complete\n",
 300                        drive->name);
 301                 return 1;
 302         }
 303         udelay(10);
 304         return 0;
 305 }
 306
 307 static void auide_dma_host_set(ide_drive_t *drive, int on)
 308 {
 309 }
 310
 311 static void auide_ddma_tx_callback(int irq, void *param)
 312 {
 313 }
 314
 315 static void auide_ddma_rx_callback(int irq, void *param)
 316 {
 317 }
 318 #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
 319
 320 static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
 321 {
 322         dev->dev_id          = dev_id;
 323         dev->dev_physaddr    = (u32)IDE_PHYS_ADDR;
 324         dev->dev_intlevel    = 0;
 325         dev->dev_intpolarity = 0;
 326         dev->dev_tsize       = tsize;
 327         dev->dev_devwidth    = devwidth;
 328         dev->dev_flags       = flags;
 329 }
 330
 331 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 332 static const struct ide_dma_ops au1xxx_dma_ops = {
 333         .dma_host_set           = auide_dma_host_set,
 334         .dma_setup              = auide_dma_setup,
 335         .dma_start              = auide_dma_start,
 336         .dma_end                = auide_dma_end,
 337         .dma_test_irq           = auide_dma_test_irq,
 338         .dma_lost_irq           = ide_dma_lost_irq,
 339 };
 340
 341 static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 342 {
 343         _auide_hwif *auide = &auide_hwif;
 344         dbdev_tab_t source_dev_tab, target_dev_tab;
 345         u32 dev_id, tsize, devwidth, flags;
 346
 347         dev_id   = IDE_DDMA_REQ;
 348
 349         tsize    =  8; /*  1 */
 350         devwidth = 32; /* 16 */
 351
 352 #ifdef IDE_AU1XXX_BURSTMODE
 353         flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
 354 #else
 355         flags = DEV_FLAGS_SYNC;
 356 #endif
 357
 358         /* setup dev_tab for tx channel */
 359         auide_init_dbdma_dev( &source_dev_tab,
 360                               dev_id,
 361                               tsize, devwidth, DEV_FLAGS_OUT | flags);
 362         auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 363
 364         auide_init_dbdma_dev( &source_dev_tab,
 365                               dev_id,
 366                               tsize, devwidth, DEV_FLAGS_IN | flags);
 367         auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 368
 369         /* We also need to add a target device for the DMA */
 370         auide_init_dbdma_dev( &target_dev_tab,
 371                               (u32)DSCR_CMD0_ALWAYS,
 372                               tsize, devwidth, DEV_FLAGS_ANYUSE);
 373         auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);
 374
 375         /* Get a channel for TX */
 376         auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
 377                                                  auide->tx_dev_id,
 378                                                  auide_ddma_tx_callback,
 379                                                  (void*)auide);
 380
 381         /* Get a channel for RX */
 382         auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
 383                                                  auide->target_dev_id,
 384                                                  auide_ddma_rx_callback,
 385                                                  (void*)auide);
 386
 387         auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
 388                                                              NUM_DESCRIPTORS);
 389         auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
 390                                                              NUM_DESCRIPTORS);
 391
 392         /* FIXME: check return value */
 393         (void)ide_allocate_dma_engine(hwif);
 394
 395         au1xxx_dbdma_start( auide->tx_chan );
 396         au1xxx_dbdma_start( auide->rx_chan );
 397
 398         return 0;
 399 }
 400 #else
 401 static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 402 {
 403         _auide_hwif *auide = &auide_hwif;
 404         dbdev_tab_t source_dev_tab;
 405         int flags;
 406
 407 #ifdef IDE_AU1XXX_BURSTMODE
 408         flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
 409 #else
 410         flags = DEV_FLAGS_SYNC;
 411 #endif
 412
 413         /* setup dev_tab for tx channel */
 414         auide_init_dbdma_dev( &source_dev_tab,
 415                               (u32)DSCR_CMD0_ALWAYS,
 416                               8, 32, DEV_FLAGS_OUT | flags);
 417         auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 418
 419         auide_init_dbdma_dev( &source_dev_tab,
 420                               (u32)DSCR_CMD0_ALWAYS,
 421                               8, 32, DEV_FLAGS_IN | flags);
 422         auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 423
 424         /* Get a channel for TX */
 425         auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
 426                                                  auide->tx_dev_id,
 427                                                  NULL,
 428                                                  (void*)auide);
 429
 430         /* Get a channel for RX */
 431         auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
 432                                                  DSCR_CMD0_ALWAYS,
 433                                                  NULL,
 434                                                  (void*)auide);
 435
 436         auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
 437                                                              NUM_DESCRIPTORS);
 438         auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
 439                                                              NUM_DESCRIPTORS);
 440
 441         au1xxx_dbdma_start( auide->tx_chan );
 442         au1xxx_dbdma_start( auide->rx_chan );
 443
 444         return 0;
 445 }
 446 #endif
 447
 448 static void auide_setup_ports(struct ide_hw *hw, _auide_hwif *ahwif)
 449 {
 450         int i;
 451         unsigned long *ata_regs = hw->io_ports_array;
 452
 453         /* FIXME? */
 454         for (i = 0; i < 8; i++)
 455                 *ata_regs++ = ahwif->regbase + (i << IDE_REG_SHIFT);
 456
 457         /* set the Alternative Status register */
 458         *ata_regs = ahwif->regbase + (14 << IDE_REG_SHIFT);
 459 }
 460
 461 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
 462 static const struct ide_tp_ops au1xxx_tp_ops = {
 463         .exec_command           = ide_exec_command,
 464         .read_status            = ide_read_status,
 465         .read_altstatus         = ide_read_altstatus,
 466         .write_devctl           = ide_write_devctl,
 467
 468         .dev_select             = ide_dev_select,
 469         .tf_load                = ide_tf_load,
 470         .tf_read                = ide_tf_read,
 471
 472         .input_data             = au1xxx_input_data,
 473         .output_data            = au1xxx_output_data,
 474 };
 475 #endif
 476
 477 static const struct ide_port_ops au1xxx_port_ops = {
 478         .set_pio_mode           = au1xxx_set_pio_mode,
 479         .set_dma_mode           = auide_set_dma_mode,
 480 };
 481
 482 static const struct ide_port_info au1xxx_port_info = {
 483         .init_dma               = auide_ddma_init,
 484 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
 485         .tp_ops                 = &au1xxx_tp_ops,
 486 #endif
 487         .port_ops               = &au1xxx_port_ops,
 488 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 489         .dma_ops                = &au1xxx_dma_ops,
 490 #endif
 491         .host_flags             = IDE_HFLAG_POST_SET_MODE |
 492                                   IDE_HFLAG_NO_IO_32BIT |
 493                                   IDE_HFLAG_UNMASK_IRQS,
 494         .pio_mask               = ATA_PIO4,
 495 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 496         .mwdma_mask             = ATA_MWDMA2,
 497 #endif
 498         .chipset                = ide_au1xxx,
 499 };
 500
 501 static int au_ide_probe(struct platform_device *dev)
 502 {
 503         _auide_hwif *ahwif = &auide_hwif;
 504         struct resource *res;
 505         struct ide_host *host;
 506         int ret = 0;
 507         struct ide_hw hw, *hws[] = { &hw };
 508
 509 #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
 510         char *mode = "MWDMA2";
 511 #elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
 512         char *mode = "PIO+DDMA(offload)";
 513 #endif
 514
 515         memset(&auide_hwif, 0, sizeof(_auide_hwif));
 516         ahwif->irq = platform_get_irq(dev, 0);
 517
 518         res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 519
 520         if (res == NULL) {
 521                 pr_debug("%s %d: no base address\n", DRV_NAME, dev->id);
 522                 ret = -ENODEV;
 523                 goto out;
 524         }
 525         if (ahwif->irq < 0) {
 526                 pr_debug("%s %d: no IRQ\n", DRV_NAME, dev->id);
 527                 ret = -ENODEV;
 528                 goto out;
 529         }
 530
 531         if (!request_mem_region(res->start, resource_size(res), dev->name)) {
 532                 pr_debug("%s: request_mem_region failed\n", DRV_NAME);
 533                 ret =  -EBUSY;
 534                 goto out;
 535         }
 536
 537         ahwif->regbase = (u32)ioremap(res->start, resource_size(res));
 538         if (ahwif->regbase == 0) {
 539                 ret = -ENOMEM;
 540                 goto out;
 541         }
 542
 543         memset(&hw, 0, sizeof(hw));
 544         auide_setup_ports(&hw, ahwif);
 545         hw.irq = ahwif->irq;
 546         hw.dev = &dev->dev;
 547
 548         ret = ide_host_add(&au1xxx_port_info, hws, 1, &host);
 549         if (ret)
 550                 goto out;
 551
 552         auide_hwif.hwif = host->ports[0];
 553
 554         platform_set_drvdata(dev, host);
 555
 556         printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
 557
 558  out:
 559         return ret;
 560 }
 561
 562 static int au_ide_remove(struct platform_device *dev)
 563 {
 564         struct resource *res;
 565         struct ide_host *host = platform_get_drvdata(dev);
 566         _auide_hwif *ahwif = &auide_hwif;
 567
 568         ide_host_remove(host);
 569
 570         iounmap((void *)ahwif->regbase);
 571
 572         res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 573         release_mem_region(res->start, resource_size(res));
 574
 575         return 0;
 576 }
 577
 578 static struct platform_driver au1200_ide_driver = {
 579         .driver = {
 580                 .name           = "au1200-ide",
 581                 .owner          = THIS_MODULE,
 582         },
 583         .probe          = au_ide_probe,
 584         .remove         = au_ide_remove,
 585 };
 586
 587 static int __init au_ide_init(void)
 588 {
 589         return platform_driver_register(&au1200_ide_driver);
 590 }
 591
 592 static void __exit au_ide_exit(void)
 593 {
 594         platform_driver_unregister(&au1200_ide_driver);
 595 }
 596
 597 MODULE_LICENSE("GPL");
 598 MODULE_DESCRIPTION("AU1200 IDE driver");
 599
 600 module_init(au_ide_init);
 601 module_exit(au_ide_exit);