include/linux/cyclades.h

   1 /* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
   2  * linux/include/linux/cyclades.h
   3  *
   4  * This file was initially written by
   5  * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
   6  * Ivan Passos <ivan@cyclades.com>.
   7  *
   8  * This file contains the general definitions for the cyclades.c driver
   9  *$Log: cyclades.h,v $
  10  *Revision 3.1  2002/01/29 11:36:16  henrique
  11  *added throttle field on struct cyclades_port to indicate whether the
  12  *port is throttled or not
  13  *
  14  *Revision 3.1  2000/04/19 18:52:52  ivan
  15  *converted address fields to unsigned long and added fields for physical
  16  *addresses on cyclades_card structure;
  17  *
  18  *Revision 3.0  1998/11/02 14:20:59  ivan
  19  *added nports field on cyclades_card structure;
  20  *
  21  *Revision 2.5  1998/08/03 16:57:01  ivan
  22  *added cyclades_idle_stats structure;
  23  *
  24  *Revision 2.4  1998/06/01 12:09:53  ivan
  25  *removed closing_wait2 from cyclades_port structure;
  26  *
  27  *Revision 2.3  1998/03/16 18:01:12  ivan
  28  *changes in the cyclades_port structure to get it closer to the
  29  *standard serial port structure;
  30  *added constants for new ioctls;
  31  *
  32  *Revision 2.2  1998/02/17 16:50:00  ivan
  33  *changes in the cyclades_port structure (addition of shutdown_wait and
  34  *chip_rev variables);
  35  *added constants for new ioctls and for CD1400 rev. numbers.
  36  *
  37  *Revision 2.1  1997/10/24 16:03:00  ivan
  38  *added rflow (which allows enabling the CD1400 special flow control
  39  *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
  40  *cyclades_port structure;
  41  *added Alpha support
  42  *
  43  *Revision 2.0  1997/06/30 10:30:00  ivan
  44  *added some new doorbell command constants related to IOCTLW and
  45  *UART error signaling
  46  *
  47  *Revision 1.8  1997/06/03 15:30:00  ivan
  48  *added constant ZFIRM_HLT
  49  *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
  50  *
  51  *Revision 1.7  1997/03/26 10:30:00  daniel
  52  *new entries at the end of cyclades_port struct to reallocate
  53  *variables illegally allocated within card memory.
  54  *
  55  *Revision 1.6  1996/09/09 18:35:30  bentson
  56  *fold in changes for Cyclom-Z -- including structures for
  57  *communicating with board as well modest changes to original
  58  *structures to support new features.
  59  *
  60  *Revision 1.5  1995/11/13 21:13:31  bentson
  61  *changes suggested by Michael Chastain <mec@duracef.shout.net>
  62  *to support use of this file in non-kernel applications
  63  *
  64  *
  65  */
  66
  67 #ifndef _LINUX_CYCLADES_H
  68 #define _LINUX_CYCLADES_H
  69
  70 #include <linux/types.h>
  71
  72 struct cyclades_monitor {
  73         unsigned long           int_count;
  74         unsigned long           char_count;
  75         unsigned long           char_max;
  76         unsigned long           char_last;
  77 };
  78
  79 /*
  80  * These stats all reflect activity since the device was last initialized.
  81  * (i.e., since the port was opened with no other processes already having it
  82  * open)
  83  */
  84 struct cyclades_idle_stats {
  85     time_t         in_use;      /* Time device has been in use (secs) */
  86     time_t         recv_idle;   /* Time since last char received (secs) */
  87     time_t         xmit_idle;   /* Time since last char transmitted (secs) */
  88     unsigned long  recv_bytes;  /* Bytes received */
  89     unsigned long  xmit_bytes;  /* Bytes transmitted */
  90     unsigned long  overruns;    /* Input overruns */
  91     unsigned long  frame_errs;  /* Input framing errors */
  92     unsigned long  parity_errs; /* Input parity errors */
  93 };
  94
  95 #define CYCLADES_MAGIC  0x4359
  96
  97 #define CYGETMON                0x435901
  98 #define CYGETTHRESH             0x435902
  99 #define CYSETTHRESH             0x435903
 100 #define CYGETDEFTHRESH          0x435904
 101 #define CYSETDEFTHRESH          0x435905
 102 #define CYGETTIMEOUT            0x435906
 103 #define CYSETTIMEOUT            0x435907
 104 #define CYGETDEFTIMEOUT         0x435908
 105 #define CYSETDEFTIMEOUT         0x435909
 106 #define CYSETRFLOW              0x43590a
 107 #define CYGETRFLOW              0x43590b
 108 #define CYSETRTSDTR_INV         0x43590c
 109 #define CYGETRTSDTR_INV         0x43590d
 110 #define CYZSETPOLLCYCLE         0x43590e
 111 #define CYZGETPOLLCYCLE         0x43590f
 112 #define CYGETCD1400VER          0x435910
 113 #define CYSETWAIT               0x435912
 114 #define CYGETWAIT               0x435913
 115
 116 /*************** CYCLOM-Z ADDITIONS ***************/
 117
 118 #define CZIOC           ('M' << 8)
 119 #define CZ_NBOARDS      (CZIOC|0xfa)
 120 #define CZ_BOOT_START   (CZIOC|0xfb)
 121 #define CZ_BOOT_DATA    (CZIOC|0xfc)
 122 #define CZ_BOOT_END     (CZIOC|0xfd)
 123 #define CZ_TEST         (CZIOC|0xfe)
 124
 125 #define CZ_DEF_POLL     (HZ/25)
 126
 127 #define MAX_BOARD       4       /* Max number of boards */
 128 #define MAX_DEV         256     /* Max number of ports total */
 129 #define CYZ_MAX_SPEED   921600
 130
 131 #define CYZ_FIFO_SIZE   16
 132
 133 #define CYZ_BOOT_NWORDS 0x100
 134 struct CYZ_BOOT_CTRL {
 135         unsigned short  nboard;
 136         int             status[MAX_BOARD];
 137         int             nchannel[MAX_BOARD];
 138         int             fw_rev[MAX_BOARD];
 139         unsigned long   offset;
 140         unsigned long   data[CYZ_BOOT_NWORDS];
 141 };
 142
 143
 144 #ifndef DP_WINDOW_SIZE
 145 /* #include "cyclomz.h" */
 146 /****************** ****************** *******************/
 147 /*
 148  *      The data types defined below are used in all ZFIRM interface
 149  *      data structures. They accomodate differences between HW
 150  *      architectures and compilers.
 151  */
 152
 153 #include <asm/types.h>
 154
 155 typedef __u64  ucdouble;                /* 64 bits, unsigned */
 156 typedef __u32  uclong;                  /* 32 bits, unsigned */
 157 typedef __u16  ucshort;         /* 16 bits, unsigned */
 158 typedef __u8   ucchar;                  /* 8 bits, unsigned */
 159
 160 /*
 161  *      Memory Window Sizes
 162  */
 163
 164 #define DP_WINDOW_SIZE          (0x00080000)    /* window size 512 Kb */
 165 #define ZE_DP_WINDOW_SIZE       (0x00100000)    /* window size 1 Mb (Ze and
 166                                                   8Zo V.2 */
 167 #define CTRL_WINDOW_SIZE        (0x00000080)    /* runtime regs 128 bytes */
 168
 169 /*
 170  *      CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
 171  *      normally will access only interested on the fpga_id, fpga_version,
 172  *      start_cpu and stop_cpu.
 173  */
 174
 175 struct  CUSTOM_REG {
 176         __u32   fpga_id;                /* FPGA Identification Register */
 177         __u32   fpga_version;           /* FPGA Version Number Register */
 178         __u32   cpu_start;              /* CPU start Register (write) */
 179         __u32   cpu_stop;               /* CPU stop Register (write) */
 180         __u32   misc_reg;               /* Miscellaneous Register */
 181         __u32   idt_mode;               /* IDT mode Register */
 182         __u32   uart_irq_status;        /* UART IRQ status Register */
 183         __u32   clear_timer0_irq;       /* Clear timer interrupt Register */
 184         __u32   clear_timer1_irq;       /* Clear timer interrupt Register */
 185         __u32   clear_timer2_irq;       /* Clear timer interrupt Register */
 186         __u32   test_register;          /* Test Register */
 187         __u32   test_count;             /* Test Count Register */
 188         __u32   timer_select;           /* Timer select register */
 189         __u32   pr_uart_irq_status;     /* Prioritized UART IRQ stat Reg */
 190         __u32   ram_wait_state;         /* RAM wait-state Register */
 191         __u32   uart_wait_state;        /* UART wait-state Register */
 192         __u32   timer_wait_state;       /* timer wait-state Register */
 193         __u32   ack_wait_state;         /* ACK wait State Register */
 194 };
 195
 196 /*
 197  *      RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
 198  *      registers. This structure can be used to access the 9060 registers
 199  *      (memory mapped).
 200  */
 201
 202 struct RUNTIME_9060 {
 203         __u32   loc_addr_range; /* 00h - Local Address Range */
 204         __u32   loc_addr_base;  /* 04h - Local Address Base */
 205         __u32   loc_arbitr;     /* 08h - Local Arbitration */
 206         __u32   endian_descr;   /* 0Ch - Big/Little Endian Descriptor */
 207         __u32   loc_rom_range;  /* 10h - Local ROM Range */
 208         __u32   loc_rom_base;   /* 14h - Local ROM Base */
 209         __u32   loc_bus_descr;  /* 18h - Local Bus descriptor */
 210         __u32   loc_range_mst;  /* 1Ch - Local Range for Master to PCI */
 211         __u32   loc_base_mst;   /* 20h - Local Base for Master PCI */
 212         __u32   loc_range_io;   /* 24h - Local Range for Master IO */
 213         __u32   pci_base_mst;   /* 28h - PCI Base for Master PCI */
 214         __u32   pci_conf_io;    /* 2Ch - PCI configuration for Master IO */
 215         __u32   filler1;        /* 30h */
 216         __u32   filler2;        /* 34h */
 217         __u32   filler3;        /* 38h */
 218         __u32   filler4;        /* 3Ch */
 219         __u32   mail_box_0;     /* 40h - Mail Box 0 */
 220         __u32   mail_box_1;     /* 44h - Mail Box 1 */
 221         __u32   mail_box_2;     /* 48h - Mail Box 2 */
 222         __u32   mail_box_3;     /* 4Ch - Mail Box 3 */
 223         __u32   filler5;        /* 50h */
 224         __u32   filler6;        /* 54h */
 225         __u32   filler7;        /* 58h */
 226         __u32   filler8;        /* 5Ch */
 227         __u32   pci_doorbell;   /* 60h - PCI to Local Doorbell */
 228         __u32   loc_doorbell;   /* 64h - Local to PCI Doorbell */
 229         __u32   intr_ctrl_stat; /* 68h - Interrupt Control/Status */
 230         __u32   init_ctrl;      /* 6Ch - EEPROM control, Init Control, etc */
 231 };
 232
 233 /* Values for the Local Base Address re-map register */
 234
 235 #define WIN_RAM         0x00000001L     /* set the sliding window to RAM */
 236 #define WIN_CREG        0x14000001L     /* set the window to custom Registers */
 237
 238 /* Values timer select registers */
 239
 240 #define TIMER_BY_1M     0x00            /* clock divided by 1M */
 241 #define TIMER_BY_256K   0x01            /* clock divided by 256k */
 242 #define TIMER_BY_128K   0x02            /* clock divided by 128k */
 243 #define TIMER_BY_32K    0x03            /* clock divided by 32k */
 244
 245 /****************** ****************** *******************/
 246 #endif
 247
 248 #ifndef ZFIRM_ID
 249 /* #include "zfwint.h" */
 250 /****************** ****************** *******************/
 251 /*
 252  *      This file contains the definitions for interfacing with the
 253  *      Cyclom-Z ZFIRM Firmware.
 254  */
 255
 256 /* General Constant definitions */
 257
 258 #define MAX_CHAN        64              /* max number of channels per board */
 259
 260 /* firmware id structure (set after boot) */
 261
 262 #define ID_ADDRESS      0x00000180L     /* signature/pointer address */
 263 #define ZFIRM_ID        0x5557465AL     /* ZFIRM/U signature */
 264 #define ZFIRM_HLT       0x59505B5CL     /* ZFIRM needs external power supply */
 265 #define ZFIRM_RST       0x56040674L     /* RST signal (due to FW reset) */
 266
 267 #define ZF_TINACT_DEF   1000            /* default inactivity timeout
 268                                            (1000 ms) */
 269 #define ZF_TINACT       ZF_TINACT_DEF
 270
 271 struct  FIRM_ID {
 272         __u32   signature;              /* ZFIRM/U signature */
 273         __u32   zfwctrl_addr;           /* pointer to ZFW_CTRL structure */
 274 };
 275
 276 /* Op. System id */
 277
 278 #define C_OS_LINUX      0x00000030      /* generic Linux system */
 279
 280 /* channel op_mode */
 281
 282 #define C_CH_DISABLE    0x00000000      /* channel is disabled */
 283 #define C_CH_TXENABLE   0x00000001      /* channel Tx enabled */
 284 #define C_CH_RXENABLE   0x00000002      /* channel Rx enabled */
 285 #define C_CH_ENABLE     0x00000003      /* channel Tx/Rx enabled */
 286 #define C_CH_LOOPBACK   0x00000004      /* Loopback mode */
 287
 288 /* comm_parity - parity */
 289
 290 #define C_PR_NONE       0x00000000      /* None */
 291 #define C_PR_ODD        0x00000001      /* Odd */
 292 #define C_PR_EVEN       0x00000002      /* Even */
 293 #define C_PR_MARK       0x00000004      /* Mark */
 294 #define C_PR_SPACE      0x00000008      /* Space */
 295 #define C_PR_PARITY     0x000000ff
 296
 297 #define C_PR_DISCARD    0x00000100      /* discard char with frame/par error */
 298 #define C_PR_IGNORE     0x00000200      /* ignore frame/par error */
 299
 300 /* comm_data_l - data length and stop bits */
 301
 302 #define C_DL_CS5        0x00000001
 303 #define C_DL_CS6        0x00000002
 304 #define C_DL_CS7        0x00000004
 305 #define C_DL_CS8        0x00000008
 306 #define C_DL_CS         0x0000000f
 307 #define C_DL_1STOP      0x00000010
 308 #define C_DL_15STOP     0x00000020
 309 #define C_DL_2STOP      0x00000040
 310 #define C_DL_STOP       0x000000f0
 311
 312 /* interrupt enabling/status */
 313
 314 #define C_IN_DISABLE    0x00000000      /* zero, disable interrupts */
 315 #define C_IN_TXBEMPTY   0x00000001      /* tx buffer empty */
 316 #define C_IN_TXLOWWM    0x00000002      /* tx buffer below LWM */
 317 #define C_IN_RXHIWM     0x00000010      /* rx buffer above HWM */
 318 #define C_IN_RXNNDT     0x00000020      /* rx no new data timeout */
 319 #define C_IN_MDCD       0x00000100      /* modem DCD change */
 320 #define C_IN_MDSR       0x00000200      /* modem DSR change */
 321 #define C_IN_MRI        0x00000400      /* modem RI change */
 322 #define C_IN_MCTS       0x00000800      /* modem CTS change */
 323 #define C_IN_RXBRK      0x00001000      /* Break received */
 324 #define C_IN_PR_ERROR   0x00002000      /* parity error */
 325 #define C_IN_FR_ERROR   0x00004000      /* frame error */
 326 #define C_IN_OVR_ERROR  0x00008000      /* overrun error */
 327 #define C_IN_RXOFL      0x00010000      /* RX buffer overflow */
 328 #define C_IN_IOCTLW     0x00020000      /* I/O control w/ wait */
 329 #define C_IN_MRTS       0x00040000      /* modem RTS drop */
 330 #define C_IN_ICHAR      0x00080000
 331
 332 /* flow control */
 333
 334 #define C_FL_OXX        0x00000001      /* output Xon/Xoff flow control */
 335 #define C_FL_IXX        0x00000002      /* output Xon/Xoff flow control */
 336 #define C_FL_OIXANY     0x00000004      /* output Xon/Xoff (any xon) */
 337 #define C_FL_SWFLOW     0x0000000f
 338
 339 /* flow status */
 340
 341 #define C_FS_TXIDLE     0x00000000      /* no Tx data in the buffer or UART */
 342 #define C_FS_SENDING    0x00000001      /* UART is sending data */
 343 #define C_FS_SWFLOW     0x00000002      /* Tx is stopped by received Xoff */
 344
 345 /* rs_control/rs_status RS-232 signals */
 346
 347 #define C_RS_PARAM      0x80000000      /* Indicates presence of parameter in
 348                                            IOCTLM command */
 349 #define C_RS_RTS        0x00000001      /* RTS */
 350 #define C_RS_DTR        0x00000004      /* DTR */
 351 #define C_RS_DCD        0x00000100      /* CD */
 352 #define C_RS_DSR        0x00000200      /* DSR */
 353 #define C_RS_RI         0x00000400      /* RI */
 354 #define C_RS_CTS        0x00000800      /* CTS */
 355
 356 /* commands Host <-> Board */
 357
 358 #define C_CM_RESET      0x01            /* reset/flush buffers */
 359 #define C_CM_IOCTL      0x02            /* re-read CH_CTRL */
 360 #define C_CM_IOCTLW     0x03            /* re-read CH_CTRL, intr when done */
 361 #define C_CM_IOCTLM     0x04            /* RS-232 outputs change */
 362 #define C_CM_SENDXOFF   0x10            /* send Xoff */
 363 #define C_CM_SENDXON    0x11            /* send Xon */
 364 #define C_CM_CLFLOW     0x12            /* Clear flow control (resume) */
 365 #define C_CM_SENDBRK    0x41            /* send break */
 366 #define C_CM_INTBACK    0x42            /* Interrupt back */
 367 #define C_CM_SET_BREAK  0x43            /* Tx break on */
 368 #define C_CM_CLR_BREAK  0x44            /* Tx break off */
 369 #define C_CM_CMD_DONE   0x45            /* Previous command done */
 370 #define C_CM_INTBACK2   0x46            /* Alternate Interrupt back */
 371 #define C_CM_TINACT     0x51            /* set inactivity detection */
 372 #define C_CM_IRQ_ENBL   0x52            /* enable generation of interrupts */
 373 #define C_CM_IRQ_DSBL   0x53            /* disable generation of interrupts */
 374 #define C_CM_ACK_ENBL   0x54            /* enable acknowledged interrupt mode */
 375 #define C_CM_ACK_DSBL   0x55            /* disable acknowledged intr mode */
 376 #define C_CM_FLUSH_RX   0x56            /* flushes Rx buffer */
 377 #define C_CM_FLUSH_TX   0x57            /* flushes Tx buffer */
 378 #define C_CM_Q_ENABLE   0x58            /* enables queue access from the
 379                                            driver */
 380 #define C_CM_Q_DISABLE  0x59            /* disables queue access from the
 381                                            driver */
 382
 383 #define C_CM_TXBEMPTY   0x60            /* Tx buffer is empty */
 384 #define C_CM_TXLOWWM    0x61            /* Tx buffer low water mark */
 385 #define C_CM_RXHIWM     0x62            /* Rx buffer high water mark */
 386 #define C_CM_RXNNDT     0x63            /* rx no new data timeout */
 387 #define C_CM_TXFEMPTY   0x64
 388 #define C_CM_ICHAR      0x65
 389 #define C_CM_MDCD       0x70            /* modem DCD change */
 390 #define C_CM_MDSR       0x71            /* modem DSR change */
 391 #define C_CM_MRI        0x72            /* modem RI change */
 392 #define C_CM_MCTS       0x73            /* modem CTS change */
 393 #define C_CM_MRTS       0x74            /* modem RTS drop */
 394 #define C_CM_RXBRK      0x84            /* Break received */
 395 #define C_CM_PR_ERROR   0x85            /* Parity error */
 396 #define C_CM_FR_ERROR   0x86            /* Frame error */
 397 #define C_CM_OVR_ERROR  0x87            /* Overrun error */
 398 #define C_CM_RXOFL      0x88            /* RX buffer overflow */
 399 #define C_CM_CMDERROR   0x90            /* command error */
 400 #define C_CM_FATAL      0x91            /* fatal error */
 401 #define C_CM_HW_RESET   0x92            /* reset board */
 402
 403 /*
 404  *      CH_CTRL - This per port structure contains all parameters
 405  *      that control an specific port. It can be seen as the
 406  *      configuration registers of a "super-serial-controller".
 407  */
 408
 409 struct CH_CTRL {
 410         __u32   op_mode;        /* operation mode */
 411         __u32   intr_enable;    /* interrupt masking */
 412         __u32   sw_flow;        /* SW flow control */
 413         __u32   flow_status;    /* output flow status */
 414         __u32   comm_baud;      /* baud rate  - numerically specified */
 415         __u32   comm_parity;    /* parity */
 416         __u32   comm_data_l;    /* data length/stop */
 417         __u32   comm_flags;     /* other flags */
 418         __u32   hw_flow;        /* HW flow control */
 419         __u32   rs_control;     /* RS-232 outputs */
 420         __u32   rs_status;      /* RS-232 inputs */
 421         __u32   flow_xon;       /* xon char */
 422         __u32   flow_xoff;      /* xoff char */
 423         __u32   hw_overflow;    /* hw overflow counter */
 424         __u32   sw_overflow;    /* sw overflow counter */
 425         __u32   comm_error;     /* frame/parity error counter */
 426         __u32 ichar;
 427         __u32 filler[7];
 428 };
 429
 430
 431 /*
 432  *      BUF_CTRL - This per channel structure contains
 433  *      all Tx and Rx buffer control for a given channel.
 434  */
 435
 436 struct  BUF_CTRL        {
 437         __u32   flag_dma;       /* buffers are in Host memory */
 438         __u32   tx_bufaddr;     /* address of the tx buffer */
 439         __u32   tx_bufsize;     /* tx buffer size */
 440         __u32   tx_threshold;   /* tx low water mark */
 441         __u32   tx_get;         /* tail index tx buf */
 442         __u32   tx_put;         /* head index tx buf */
 443         __u32   rx_bufaddr;     /* address of the rx buffer */
 444         __u32   rx_bufsize;     /* rx buffer size */
 445         __u32   rx_threshold;   /* rx high water mark */
 446         __u32   rx_get;         /* tail index rx buf */
 447         __u32   rx_put;         /* head index rx buf */
 448         __u32   filler[5];      /* filler to align structures */
 449 };
 450
 451 /*
 452  *      BOARD_CTRL - This per board structure contains all global
 453  *      control fields related to the board.
 454  */
 455
 456 struct BOARD_CTRL {
 457
 458         /* static info provided by the on-board CPU */
 459         __u32   n_channel;      /* number of channels */
 460         __u32   fw_version;     /* firmware version */
 461
 462         /* static info provided by the driver */
 463         __u32   op_system;      /* op_system id */
 464         __u32   dr_version;     /* driver version */
 465
 466         /* board control area */
 467         __u32   inactivity;     /* inactivity control */
 468
 469         /* host to FW commands */
 470         __u32   hcmd_channel;   /* channel number */
 471         __u32   hcmd_param;     /* pointer to parameters */
 472
 473         /* FW to Host commands */
 474         __u32   fwcmd_channel;  /* channel number */
 475         __u32   fwcmd_param;    /* pointer to parameters */
 476         __u32   zf_int_queue_addr; /* offset for INT_QUEUE structure */
 477
 478         /* filler so the structures are aligned */
 479         __u32   filler[6];
 480 };
 481
 482 /* Host Interrupt Queue */
 483
 484 #define QUEUE_SIZE      (10*MAX_CHAN)
 485
 486 struct  INT_QUEUE {
 487         unsigned char   intr_code[QUEUE_SIZE];
 488         unsigned long   channel[QUEUE_SIZE];
 489         unsigned long   param[QUEUE_SIZE];
 490         unsigned long   put;
 491         unsigned long   get;
 492 };
 493
 494 /*
 495  *      ZFW_CTRL - This is the data structure that includes all other
 496  *      data structures used by the Firmware.
 497  */
 498
 499 struct ZFW_CTRL {
 500         struct BOARD_CTRL       board_ctrl;
 501         struct CH_CTRL          ch_ctrl[MAX_CHAN];
 502         struct BUF_CTRL         buf_ctrl[MAX_CHAN];
 503 };
 504
 505 /****************** ****************** *******************/
 506 #endif
 507
 508 #ifdef __KERNEL__
 509
 510 /* Per card data structure */
 511 struct cyclades_card {
 512     void __iomem *base_addr;
 513     void __iomem *ctl_addr;
 514     int irq;
 515     unsigned int num_chips;     /* 0 if card absent, -1 if Z/PCI, else Y */
 516     unsigned int first_line;    /* minor number of first channel on card */
 517     unsigned int nports;        /* Number of ports in the card */
 518     int bus_index;              /* address shift - 0 for ISA, 1 for PCI */
 519     int intr_enabled;           /* FW Interrupt flag - 0 disabled, 1 enabled */
 520     spinlock_t card_lock;
 521     struct cyclades_port *ports;
 522 };
 523
 524 /***************************************
 525  * Memory access functions/macros      *
 526  * (required to support Alpha systems) *
 527  ***************************************/
 528
 529 #define cy_writeb(port,val)     do { writeb((val), (port)); mb(); } while (0)
 530 #define cy_writew(port,val)     do { writew((val), (port)); mb(); } while (0)
 531 #define cy_writel(port,val)     do { writel((val), (port)); mb(); } while (0)
 532
 533 /*
 534  * Statistics counters
 535  */
 536 struct cyclades_icount {
 537         __u32   cts, dsr, rng, dcd, tx, rx;
 538         __u32   frame, parity, overrun, brk;
 539         __u32   buf_overrun;
 540 };
 541
 542 /*
 543  * This is our internal structure for each serial port's state.
 544  *
 545  * Many fields are paralleled by the structure used by the serial_struct
 546  * structure.
 547  *
 548  * For definitions of the flags field, see tty.h
 549  */
 550
 551 struct cyclades_port {
 552         int                     magic;
 553         struct tty_port         port;
 554         struct cyclades_card    *card;
 555         int                     line;
 556         int                     flags;          /* defined in tty.h */
 557         int                     type;           /* UART type */
 558         int                     read_status_mask;
 559         int                     ignore_status_mask;
 560         int                     timeout;
 561         int                     xmit_fifo_size;
 562         int                     cor1,cor2,cor3,cor4,cor5;
 563         int                     tbpr,tco,rbpr,rco;
 564         int                     baud;
 565         int                     rflow;
 566         int                     rtsdtr_inv;
 567         int                     chip_rev;
 568         int                     custom_divisor;
 569         u8                      x_char; /* to be pushed out ASAP */
 570         int                     breakon;
 571         int                     breakoff;
 572         int                     xmit_head;
 573         int                     xmit_tail;
 574         int                     xmit_cnt;
 575         int                     default_threshold;
 576         int                     default_timeout;
 577         unsigned long           rflush_count;
 578         struct cyclades_monitor mon;
 579         struct cyclades_idle_stats      idle_stats;
 580         struct cyclades_icount  icount;
 581         struct completion       shutdown_wait;
 582         wait_queue_head_t       delta_msr_wait;
 583         int throttle;
 584 };
 585
 586 #define CLOSING_WAIT_DELAY      30*HZ
 587 #define CY_CLOSING_WAIT_NONE    ASYNC_CLOSING_WAIT_NONE
 588 #define CY_CLOSING_WAIT_INF     ASYNC_CLOSING_WAIT_INF
 589
 590
 591 #define CyMAX_CHIPS_PER_CARD    8
 592 #define CyMAX_CHAR_FIFO         12
 593 #define CyPORTS_PER_CHIP        4
 594 #define CD1400_MAX_SPEED        115200
 595
 596 #define CyISA_Ywin      0x2000
 597
 598 #define CyPCI_Ywin      0x4000
 599 #define CyPCI_Yctl      0x80
 600 #define CyPCI_Zctl      CTRL_WINDOW_SIZE
 601 #define CyPCI_Zwin      0x80000
 602 #define CyPCI_Ze_win    (2 * CyPCI_Zwin)
 603
 604 #define PCI_DEVICE_ID_MASK      0x06
 605
 606 /**** CD1400 registers ****/
 607
 608 #define CD1400_REV_G    0x46
 609 #define CD1400_REV_J    0x48
 610
 611 #define CyRegSize       0x0400
 612 #define Cy_HwReset      0x1400
 613 #define Cy_ClrIntr      0x1800
 614 #define Cy_EpldRev      0x1e00
 615
 616 /* Global Registers */
 617
 618 #define CyGFRCR         (0x40*2)
 619 #define      CyRevE             (44)
 620 #define CyCAR           (0x68*2)
 621 #define      CyCHAN_0           (0x00)
 622 #define      CyCHAN_1           (0x01)
 623 #define      CyCHAN_2           (0x02)
 624 #define      CyCHAN_3           (0x03)
 625 #define CyGCR           (0x4B*2)
 626 #define      CyCH0_SERIAL       (0x00)
 627 #define      CyCH0_PARALLEL     (0x80)
 628 #define CySVRR          (0x67*2)
 629 #define      CySRModem          (0x04)
 630 #define      CySRTransmit       (0x02)
 631 #define      CySRReceive        (0x01)
 632 #define CyRICR          (0x44*2)
 633 #define CyTICR          (0x45*2)
 634 #define CyMICR          (0x46*2)
 635 #define      CyICR0             (0x00)
 636 #define      CyICR1             (0x01)
 637 #define      CyICR2             (0x02)
 638 #define      CyICR3             (0x03)
 639 #define CyRIR           (0x6B*2)
 640 #define CyTIR           (0x6A*2)
 641 #define CyMIR           (0x69*2)
 642 #define      CyIRDirEq          (0x80)
 643 #define      CyIRBusy           (0x40)
 644 #define      CyIRUnfair         (0x20)
 645 #define      CyIRContext        (0x1C)
 646 #define      CyIRChannel        (0x03)
 647 #define CyPPR           (0x7E*2)
 648 #define      CyCLOCK_20_1MS     (0x27)
 649 #define      CyCLOCK_25_1MS     (0x31)
 650 #define      CyCLOCK_25_5MS     (0xf4)
 651 #define      CyCLOCK_60_1MS     (0x75)
 652 #define      CyCLOCK_60_2MS     (0xea)
 653
 654 /* Virtual Registers */
 655
 656 #define CyRIVR          (0x43*2)
 657 #define CyTIVR          (0x42*2)
 658 #define CyMIVR          (0x41*2)
 659 #define      CyIVRMask (0x07)
 660 #define      CyIVRRxEx (0x07)
 661 #define      CyIVRRxOK (0x03)
 662 #define      CyIVRTxOK (0x02)
 663 #define      CyIVRMdmOK (0x01)
 664 #define CyTDR           (0x63*2)
 665 #define CyRDSR          (0x62*2)
 666 #define      CyTIMEOUT          (0x80)
 667 #define      CySPECHAR          (0x70)
 668 #define      CyBREAK            (0x08)
 669 #define      CyPARITY           (0x04)
 670 #define      CyFRAME            (0x02)
 671 #define      CyOVERRUN          (0x01)
 672 #define CyMISR          (0x4C*2)
 673 /* see CyMCOR_ and CyMSVR_ for bits*/
 674 #define CyEOSRR         (0x60*2)
 675
 676 /* Channel Registers */
 677
 678 #define CyLIVR          (0x18*2)
 679 #define      CyMscsr            (0x01)
 680 #define      CyTdsr             (0x02)
 681 #define      CyRgdsr            (0x03)
 682 #define      CyRedsr            (0x07)
 683 #define CyCCR           (0x05*2)
 684 /* Format 1 */
 685 #define      CyCHAN_RESET       (0x80)
 686 #define      CyCHIP_RESET       (0x81)
 687 #define      CyFlushTransFIFO   (0x82)
 688 /* Format 2 */
 689 #define      CyCOR_CHANGE       (0x40)
 690 #define      CyCOR1ch           (0x02)
 691 #define      CyCOR2ch           (0x04)
 692 #define      CyCOR3ch           (0x08)
 693 /* Format 3 */
 694 #define      CySEND_SPEC_1      (0x21)
 695 #define      CySEND_SPEC_2      (0x22)
 696 #define      CySEND_SPEC_3      (0x23)
 697 #define      CySEND_SPEC_4      (0x24)
 698 /* Format 4 */
 699 #define      CyCHAN_CTL         (0x10)
 700 #define      CyDIS_RCVR         (0x01)
 701 #define      CyENB_RCVR         (0x02)
 702 #define      CyDIS_XMTR         (0x04)
 703 #define      CyENB_XMTR         (0x08)
 704 #define CySRER          (0x06*2)
 705 #define      CyMdmCh            (0x80)
 706 #define      CyRxData           (0x10)
 707 #define      CyTxRdy            (0x04)
 708 #define      CyTxMpty           (0x02)
 709 #define      CyNNDT             (0x01)
 710 #define CyCOR1          (0x08*2)
 711 #define      CyPARITY_NONE      (0x00)
 712 #define      CyPARITY_0         (0x20)
 713 #define      CyPARITY_1         (0xA0)
 714 #define      CyPARITY_E         (0x40)
 715 #define      CyPARITY_O         (0xC0)
 716 #define      Cy_1_STOP          (0x00)
 717 #define      Cy_1_5_STOP        (0x04)
 718 #define      Cy_2_STOP          (0x08)
 719 #define      Cy_5_BITS          (0x00)
 720 #define      Cy_6_BITS          (0x01)
 721 #define      Cy_7_BITS          (0x02)
 722 #define      Cy_8_BITS          (0x03)
 723 #define CyCOR2          (0x09*2)
 724 #define      CyIXM              (0x80)
 725 #define      CyTxIBE            (0x40)
 726 #define      CyETC              (0x20)
 727 #define      CyAUTO_TXFL        (0x60)
 728 #define      CyLLM              (0x10)
 729 #define      CyRLM              (0x08)
 730 #define      CyRtsAO            (0x04)
 731 #define      CyCtsAE            (0x02)
 732 #define      CyDsrAE            (0x01)
 733 #define CyCOR3          (0x0A*2)
 734 #define      CySPL_CH_DRANGE    (0x80)  /* special character detect range */
 735 #define      CySPL_CH_DET1      (0x40)  /* enable special character detection
 736                                                                on SCHR4-SCHR3 */
 737 #define      CyFL_CTRL_TRNSP    (0x20)  /* Flow Control Transparency */
 738 #define      CySPL_CH_DET2      (0x10)  /* Enable special character detection
 739                                                                on SCHR2-SCHR1 */
 740 #define      CyREC_FIFO         (0x0F)  /* Receive FIFO threshold */
 741 #define CyCOR4          (0x1E*2)
 742 #define CyCOR5          (0x1F*2)
 743 #define CyCCSR          (0x0B*2)
 744 #define      CyRxEN             (0x80)
 745 #define      CyRxFloff          (0x40)
 746 #define      CyRxFlon           (0x20)
 747 #define      CyTxEN             (0x08)
 748 #define      CyTxFloff          (0x04)
 749 #define      CyTxFlon           (0x02)
 750 #define CyRDCR          (0x0E*2)
 751 #define CySCHR1         (0x1A*2)
 752 #define CySCHR2         (0x1B*2)
 753 #define CySCHR3         (0x1C*2)
 754 #define CySCHR4         (0x1D*2)
 755 #define CySCRL          (0x22*2)
 756 #define CySCRH          (0x23*2)
 757 #define CyLNC           (0x24*2)
 758 #define CyMCOR1         (0x15*2)
 759 #define CyMCOR2         (0x16*2)
 760 #define CyRTPR          (0x21*2)
 761 #define CyMSVR1         (0x6C*2)
 762 #define CyMSVR2         (0x6D*2)
 763 #define      CyANY_DELTA        (0xF0)
 764 #define      CyDSR              (0x80)
 765 #define      CyCTS              (0x40)
 766 #define      CyRI               (0x20)
 767 #define      CyDCD              (0x10)
 768 #define      CyDTR              (0x02)
 769 #define      CyRTS              (0x01)
 770 #define CyPVSR          (0x6F*2)
 771 #define CyRBPR          (0x78*2)
 772 #define CyRCOR          (0x7C*2)
 773 #define CyTBPR          (0x72*2)
 774 #define CyTCOR          (0x76*2)
 775
 776 /* Custom Registers */
 777
 778 #define CyPLX_VER       (0x3400)
 779 #define PLX_9050        0x0b
 780 #define PLX_9060        0x0c
 781 #define PLX_9080        0x0d
 782
 783 /***************************************************************************/
 784
 785 #endif /* __KERNEL__ */
 786 #endif /* _LINUX_CYCLADES_H */