?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ata/sata_fsl: Update for ata_link introduction
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / hwmon / w83627hf.c
blob20ae425a1980ce7add4c6a29b055279908a54a60
1 /*
2 w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
3 monitoring
4 Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>,
5 Philip Edelbrock <phil@netroedge.com>,
6 and Mark Studebaker <mdsxyz123@yahoo.com>
7 Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
8 Copyright (c) 2007 Jean Delvare <khali@linux-fr.org>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 /*
26 Supports following chips:
27
28 Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
29 w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
30 w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
31 w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
32 w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
33 w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
34
35 For other winbond chips, and for i2c support in the above chips,
36 use w83781d.c.
37
38 Note: automatic ("cruise") fan control for 697, 637 & 627thf not
39 supported yet.
40 */
41
42 #include <linux/module.h>
43 #include <linux/init.h>
44 #include <linux/slab.h>
45 #include <linux/jiffies.h>
46 #include <linux/platform_device.h>
47 #include <linux/hwmon.h>
48 #include <linux/hwmon-sysfs.h>
49 #include <linux/hwmon-vid.h>
50 #include <linux/err.h>
51 #include <linux/mutex.h>
52 #include <linux/ioport.h>
53 #include <asm/io.h>
54 #include "lm75.h"
55
56 static struct platform_device *pdev;
57
58 #define DRVNAME "w83627hf"
59 enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
60
61 static u16 force_addr;
62 module_param(force_addr, ushort, 0);
63 MODULE_PARM_DESC(force_addr,
64 "Initialize the base address of the sensors");
65 static u8 force_i2c = 0x1f;
66 module_param(force_i2c, byte, 0);
67 MODULE_PARM_DESC(force_i2c,
68 "Initialize the i2c address of the sensors");
69
70 static int reset;
71 module_param(reset, bool, 0);
72 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
73
74 static int init = 1;
75 module_param(init, bool, 0);
76 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
77
78 /* modified from kernel/include/traps.c */
79 static int REG; /* The register to read/write */
80 #define DEV 0x07 /* Register: Logical device select */
81 static int VAL; /* The value to read/write */
82
83 /* logical device numbers for superio_select (below) */
84 #define W83627HF_LD_FDC 0x00
85 #define W83627HF_LD_PRT 0x01
86 #define W83627HF_LD_UART1 0x02
87 #define W83627HF_LD_UART2 0x03
88 #define W83627HF_LD_KBC 0x05
89 #define W83627HF_LD_CIR 0x06 /* w83627hf only */
90 #define W83627HF_LD_GAME 0x07
91 #define W83627HF_LD_MIDI 0x07
92 #define W83627HF_LD_GPIO1 0x07
93 #define W83627HF_LD_GPIO5 0x07 /* w83627thf only */
94 #define W83627HF_LD_GPIO2 0x08
95 #define W83627HF_LD_GPIO3 0x09
96 #define W83627HF_LD_GPIO4 0x09 /* w83627thf only */
97 #define W83627HF_LD_ACPI 0x0a
98 #define W83627HF_LD_HWM 0x0b
99
100 #define DEVID 0x20 /* Register: Device ID */
101
102 #define W83627THF_GPIO5_EN 0x30 /* w83627thf only */
103 #define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */
104 #define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */
105
106 #define W83687THF_VID_EN 0x29 /* w83687thf only */
107 #define W83687THF_VID_CFG 0xF0 /* w83687thf only */
108 #define W83687THF_VID_DATA 0xF1 /* w83687thf only */
109
110 static inline void
111 superio_outb(int reg, int val)
112 {
113 outb(reg, REG);
114 outb(val, VAL);
115 }
116
117 static inline int
118 superio_inb(int reg)
119 {
120 outb(reg, REG);
121 return inb(VAL);
122 }
123
124 static inline void
125 superio_select(int ld)
126 {
127 outb(DEV, REG);
128 outb(ld, VAL);
129 }
130
131 static inline void
132 superio_enter(void)
133 {
134 outb(0x87, REG);
135 outb(0x87, REG);
136 }
137
138 static inline void
139 superio_exit(void)
140 {
141 outb(0xAA, REG);
142 }
143
144 #define W627_DEVID 0x52
145 #define W627THF_DEVID 0x82
146 #define W697_DEVID 0x60
147 #define W637_DEVID 0x70
148 #define W687THF_DEVID 0x85
149 #define WINB_ACT_REG 0x30
150 #define WINB_BASE_REG 0x60
151 /* Constants specified below */
152
153 /* Alignment of the base address */
154 #define WINB_ALIGNMENT ~7
155
156 /* Offset & size of I/O region we are interested in */
157 #define WINB_REGION_OFFSET 5
158 #define WINB_REGION_SIZE 2
159
160 /* Where are the sensors address/data registers relative to the region offset */
161 #define W83781D_ADDR_REG_OFFSET 0
162 #define W83781D_DATA_REG_OFFSET 1
163
164 /* The W83781D registers */
165 /* The W83782D registers for nr=7,8 are in bank 5 */
166 #define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
167 (0x554 + (((nr) - 7) * 2)))
168 #define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
169 (0x555 + (((nr) - 7) * 2)))
170 #define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
171 (0x550 + (nr) - 7))
172
173 #define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
174 #define W83781D_REG_FAN(nr) (0x27 + (nr))
175
176 #define W83781D_REG_TEMP2_CONFIG 0x152
177 #define W83781D_REG_TEMP3_CONFIG 0x252
178 #define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \
179 ((nr == 2) ? (0x0150) : \
180 (0x27)))
181 #define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \
182 ((nr == 2) ? (0x153) : \
183 (0x3A)))
184 #define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \
185 ((nr == 2) ? (0x155) : \
186 (0x39)))
187
188 #define W83781D_REG_BANK 0x4E
189
190 #define W83781D_REG_CONFIG 0x40
191 #define W83781D_REG_ALARM1 0x459
192 #define W83781D_REG_ALARM2 0x45A
193 #define W83781D_REG_ALARM3 0x45B
194
195 #define W83781D_REG_BEEP_CONFIG 0x4D
196 #define W83781D_REG_BEEP_INTS1 0x56
197 #define W83781D_REG_BEEP_INTS2 0x57
198 #define W83781D_REG_BEEP_INTS3 0x453
199
200 #define W83781D_REG_VID_FANDIV 0x47
201
202 #define W83781D_REG_CHIPID 0x49
203 #define W83781D_REG_WCHIPID 0x58
204 #define W83781D_REG_CHIPMAN 0x4F
205 #define W83781D_REG_PIN 0x4B
206
207 #define W83781D_REG_VBAT 0x5D
208
209 #define W83627HF_REG_PWM1 0x5A
210 #define W83627HF_REG_PWM2 0x5B
211
212 #define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */
213 #define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */
214 #define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */
215
216 #define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF/687THF too */
217
218 static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
219 static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
220 W83627THF_REG_PWM3 };
221 #define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
222 regpwm_627hf[nr] : regpwm[nr])
223
224 #define W83627HF_REG_PWM_FREQ 0x5C /* Only for the 627HF */
225
226 #define W83637HF_REG_PWM_FREQ1 0x00 /* 697HF/687THF too */
227 #define W83637HF_REG_PWM_FREQ2 0x02 /* 697HF/687THF too */
228 #define W83637HF_REG_PWM_FREQ3 0x10 /* 687THF too */
229
230 static const u8 W83637HF_REG_PWM_FREQ[] = { W83637HF_REG_PWM_FREQ1,
231 W83637HF_REG_PWM_FREQ2,
232 W83637HF_REG_PWM_FREQ3 };
233
234 #define W83627HF_BASE_PWM_FREQ 46870
235
236 #define W83781D_REG_I2C_ADDR 0x48
237 #define W83781D_REG_I2C_SUBADDR 0x4A
238
239 /* Sensor selection */
240 #define W83781D_REG_SCFG1 0x5D
241 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
242 #define W83781D_REG_SCFG2 0x59
243 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
244 #define W83781D_DEFAULT_BETA 3435
245
246 /* Conversions. Limit checking is only done on the TO_REG
247 variants. Note that you should be a bit careful with which arguments
248 these macros are called: arguments may be evaluated more than once.
249 Fixing this is just not worth it. */
250 #define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255))
251 #define IN_FROM_REG(val) ((val) * 16)
252
253 static inline u8 FAN_TO_REG(long rpm, int div)
254 {
255 if (rpm == 0)
256 return 255;
257 rpm = SENSORS_LIMIT(rpm, 1, 1000000);
258 return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
259 254);
260 }
261
262 #define TEMP_MIN (-128000)
263 #define TEMP_MAX ( 127000)
264
265 /* TEMP: 0.001C/bit (-128C to +127C)
266 REG: 1C/bit, two's complement */
267 static u8 TEMP_TO_REG(long temp)
268 {
269 int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
270 ntemp += (ntemp<0 ? -500 : 500);
271 return (u8)(ntemp / 1000);
272 }
273
274 static int TEMP_FROM_REG(u8 reg)
275 {
276 return (s8)reg * 1000;
277 }
278
279 #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
280
281 #define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
282
283 static inline unsigned long pwm_freq_from_reg_627hf(u8 reg)
284 {
285 unsigned long freq;
286 freq = W83627HF_BASE_PWM_FREQ >> reg;
287 return freq;
288 }
289 static inline u8 pwm_freq_to_reg_627hf(unsigned long val)
290 {
291 u8 i;
292 /* Only 5 dividers (1 2 4 8 16)
293 Search for the nearest available frequency */
294 for (i = 0; i < 4; i++) {
295 if (val > (((W83627HF_BASE_PWM_FREQ >> i) +
296 (W83627HF_BASE_PWM_FREQ >> (i+1))) / 2))
297 break;
298 }
299 return i;
300 }
301
302 static inline unsigned long pwm_freq_from_reg(u8 reg)
303 {
304 /* Clock bit 8 -> 180 kHz or 24 MHz */
305 unsigned long clock = (reg & 0x80) ? 180000UL : 24000000UL;
306
307 reg &= 0x7f;
308 /* This should not happen but anyway... */
309 if (reg == 0)
310 reg++;
311 return (clock / (reg << 8));
312 }
313 static inline u8 pwm_freq_to_reg(unsigned long val)
314 {
315 /* Minimum divider value is 0x01 and maximum is 0x7F */
316 if (val >= 93750) /* The highest we can do */
317 return 0x01;
318 if (val >= 720) /* Use 24 MHz clock */
319 return (24000000UL / (val << 8));
320 if (val < 6) /* The lowest we can do */
321 return 0xFF;
322 else /* Use 180 kHz clock */
323 return (0x80 | (180000UL / (val << 8)));
324 }
325
326 #define BEEP_MASK_FROM_REG(val) (val)
327 #define BEEP_MASK_TO_REG(val) ((val) & 0xffffff)
328 #define BEEP_ENABLE_TO_REG(val) ((val)?1:0)
329 #define BEEP_ENABLE_FROM_REG(val) ((val)?1:0)
330
331 #define DIV_FROM_REG(val) (1 << (val))
332
333 static inline u8 DIV_TO_REG(long val)
334 {
335 int i;
336 val = SENSORS_LIMIT(val, 1, 128) >> 1;
337 for (i = 0; i < 7; i++) {
338 if (val == 0)
339 break;
340 val >>= 1;
341 }
342 return ((u8) i);
343 }
344
345 /* For each registered chip, we need to keep some data in memory.
346 The structure is dynamically allocated. */
347 struct w83627hf_data {
348 unsigned short addr;
349 const char *name;
350 struct device *hwmon_dev;
351 struct mutex lock;
352 enum chips type;
353
354 struct mutex update_lock;
355 char valid; /* !=0 if following fields are valid */
356 unsigned long last_updated; /* In jiffies */
357
358 u8 in[9]; /* Register value */
359 u8 in_max[9]; /* Register value */
360 u8 in_min[9]; /* Register value */
361 u8 fan[3]; /* Register value */
362 u8 fan_min[3]; /* Register value */
363 u8 temp;
364 u8 temp_max; /* Register value */
365 u8 temp_max_hyst; /* Register value */
366 u16 temp_add[2]; /* Register value */
367 u16 temp_max_add[2]; /* Register value */
368 u16 temp_max_hyst_add[2]; /* Register value */
369 u8 fan_div[3]; /* Register encoding, shifted right */
370 u8 vid; /* Register encoding, combined */
371 u32 alarms; /* Register encoding, combined */
372 u32 beep_mask; /* Register encoding, combined */
373 u8 beep_enable; /* Boolean */
374 u8 pwm[3]; /* Register value */
375 u8 pwm_freq[3]; /* Register value */
376 u16 sens[3]; /* 1 = pentium diode; 2 = 3904 diode;
377 4 = thermistor */
378 u8 vrm;
379 u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */
380 };
381
382 struct w83627hf_sio_data {
383 enum chips type;
384 };
385
386
387 static int w83627hf_probe(struct platform_device *pdev);
388 static int __devexit w83627hf_remove(struct platform_device *pdev);
389
390 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
391 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);
392 static void w83627hf_update_fan_div(struct w83627hf_data *data);
393 static struct w83627hf_data *w83627hf_update_device(struct device *dev);
394 static void w83627hf_init_device(struct platform_device *pdev);
395
396 static struct platform_driver w83627hf_driver = {
397 .driver = {
398 .owner = THIS_MODULE,
399 .name = DRVNAME,
400 },
401 .probe = w83627hf_probe,
402 .remove = __devexit_p(w83627hf_remove),
403 };
404
405 static ssize_t
406 show_in_input(struct device *dev, struct device_attribute *devattr, char *buf)
407 {
408 int nr = to_sensor_dev_attr(devattr)->index;
409 struct w83627hf_data *data = w83627hf_update_device(dev);
410 return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in[nr]));
411 }
412 static ssize_t
413 show_in_min(struct device *dev, struct device_attribute *devattr, char *buf)
414 {
415 int nr = to_sensor_dev_attr(devattr)->index;
416 struct w83627hf_data *data = w83627hf_update_device(dev);
417 return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_min[nr]));
418 }
419 static ssize_t
420 show_in_max(struct device *dev, struct device_attribute *devattr, char *buf)
421 {
422 int nr = to_sensor_dev_attr(devattr)->index;
423 struct w83627hf_data *data = w83627hf_update_device(dev);
424 return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_max[nr]));
425 }
426 static ssize_t
427 store_in_min(struct device *dev, struct device_attribute *devattr,
428 const char *buf, size_t count)
429 {
430 int nr = to_sensor_dev_attr(devattr)->index;
431 struct w83627hf_data *data = dev_get_drvdata(dev);
432 long val = simple_strtol(buf, NULL, 10);
433
434 mutex_lock(&data->update_lock);
435 data->in_min[nr] = IN_TO_REG(val);
436 w83627hf_write_value(data, W83781D_REG_IN_MIN(nr), data->in_min[nr]);
437 mutex_unlock(&data->update_lock);
438 return count;
439 }
440 static ssize_t
441 store_in_max(struct device *dev, struct device_attribute *devattr,
442 const char *buf, size_t count)
443 {
444 int nr = to_sensor_dev_attr(devattr)->index;
445 struct w83627hf_data *data = dev_get_drvdata(dev);
446 long val = simple_strtol(buf, NULL, 10);
447
448 mutex_lock(&data->update_lock);
449 data->in_max[nr] = IN_TO_REG(val);
450 w83627hf_write_value(data, W83781D_REG_IN_MAX(nr), data->in_max[nr]);
451 mutex_unlock(&data->update_lock);
452 return count;
453 }
454 #define sysfs_vin_decl(offset) \
455 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
456 show_in_input, NULL, offset); \
457 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO|S_IWUSR, \
458 show_in_min, store_in_min, offset); \
459 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO|S_IWUSR, \
460 show_in_max, store_in_max, offset);
461
462 sysfs_vin_decl(1);
463 sysfs_vin_decl(2);
464 sysfs_vin_decl(3);
465 sysfs_vin_decl(4);
466 sysfs_vin_decl(5);
467 sysfs_vin_decl(6);
468 sysfs_vin_decl(7);
469 sysfs_vin_decl(8);
470
471 /* use a different set of functions for in0 */
472 static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
473 {
474 long in0;
475
476 if ((data->vrm_ovt & 0x01) &&
477 (w83627thf == data->type || w83637hf == data->type
478 || w83687thf == data->type))
479
480 /* use VRM9 calculation */
481 in0 = (long)((reg * 488 + 70000 + 50) / 100);
482 else
483 /* use VRM8 (standard) calculation */
484 in0 = (long)IN_FROM_REG(reg);
485
486 return sprintf(buf,"%ld\n", in0);
487 }
488
489 static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf)
490 {
491 struct w83627hf_data *data = w83627hf_update_device(dev);
492 return show_in_0(data, buf, data->in[0]);
493 }
494
495 static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf)
496 {
497 struct w83627hf_data *data = w83627hf_update_device(dev);
498 return show_in_0(data, buf, data->in_min[0]);
499 }
500
501 static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf)
502 {
503 struct w83627hf_data *data = w83627hf_update_device(dev);
504 return show_in_0(data, buf, data->in_max[0]);
505 }
506
507 static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr,
508 const char *buf, size_t count)
509 {
510 struct w83627hf_data *data = dev_get_drvdata(dev);
511 u32 val;
512
513 val = simple_strtoul(buf, NULL, 10);
514
515 mutex_lock(&data->update_lock);
516
517 if ((data->vrm_ovt & 0x01) &&
518 (w83627thf == data->type || w83637hf == data->type
519 || w83687thf == data->type))
520
521 /* use VRM9 calculation */
522 data->in_min[0] =
523 SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0,
524 255);
525 else
526 /* use VRM8 (standard) calculation */
527 data->in_min[0] = IN_TO_REG(val);
528
529 w83627hf_write_value(data, W83781D_REG_IN_MIN(0), data->in_min[0]);
530 mutex_unlock(&data->update_lock);
531 return count;
532 }
533
534 static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr,
535 const char *buf, size_t count)
536 {
537 struct w83627hf_data *data = dev_get_drvdata(dev);
538 u32 val;
539
540 val = simple_strtoul(buf, NULL, 10);
541
542 mutex_lock(&data->update_lock);
543
544 if ((data->vrm_ovt & 0x01) &&
545 (w83627thf == data->type || w83637hf == data->type
546 || w83687thf == data->type))
547
548 /* use VRM9 calculation */
549 data->in_max[0] =
550 SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0,
551 255);
552 else
553 /* use VRM8 (standard) calculation */
554 data->in_max[0] = IN_TO_REG(val);
555
556 w83627hf_write_value(data, W83781D_REG_IN_MAX(0), data->in_max[0]);
557 mutex_unlock(&data->update_lock);
558 return count;
559 }
560
561 static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL);
562 static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
563 show_regs_in_min0, store_regs_in_min0);
564 static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
565 show_regs_in_max0, store_regs_in_max0);
566
567 static ssize_t
568 show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf)
569 {
570 int nr = to_sensor_dev_attr(devattr)->index;
571 struct w83627hf_data *data = w83627hf_update_device(dev);
572 return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan[nr],
573 (long)DIV_FROM_REG(data->fan_div[nr])));
574 }
575 static ssize_t
576 show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf)
577 {
578 int nr = to_sensor_dev_attr(devattr)->index;
579 struct w83627hf_data *data = w83627hf_update_device(dev);
580 return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan_min[nr],
581 (long)DIV_FROM_REG(data->fan_div[nr])));
582 }
583 static ssize_t
584 store_fan_min(struct device *dev, struct device_attribute *devattr,
585 const char *buf, size_t count)
586 {
587 int nr = to_sensor_dev_attr(devattr)->index;
588 struct w83627hf_data *data = dev_get_drvdata(dev);
589 u32 val = simple_strtoul(buf, NULL, 10);
590
591 mutex_lock(&data->update_lock);
592 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
593 w83627hf_write_value(data, W83781D_REG_FAN_MIN(nr+1),
594 data->fan_min[nr]);
595
596 mutex_unlock(&data->update_lock);
597 return count;
598 }
599 #define sysfs_fan_decl(offset) \
600 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
601 show_fan_input, NULL, offset - 1); \
602 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
603 show_fan_min, store_fan_min, offset - 1);
604
605 sysfs_fan_decl(1);
606 sysfs_fan_decl(2);
607 sysfs_fan_decl(3);
608
609 static ssize_t
610 show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
611 {
612 int nr = to_sensor_dev_attr(devattr)->index;
613 struct w83627hf_data *data = w83627hf_update_device(dev);
614 if (nr >= 2) { /* TEMP2 and TEMP3 */
615 return sprintf(buf, "%ld\n",
616 (long)LM75_TEMP_FROM_REG(data->temp_add[nr-2]));
617 } else { /* TEMP1 */
618 return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->temp));
619 }
620 }
621
622 static ssize_t
623 show_temp_max(struct device *dev, struct device_attribute *devattr,
624 char *buf)
625 {
626 int nr = to_sensor_dev_attr(devattr)->index;
627 struct w83627hf_data *data = w83627hf_update_device(dev);
628 if (nr >= 2) { /* TEMP2 and TEMP3 */
629 return sprintf(buf, "%ld\n",
630 (long)LM75_TEMP_FROM_REG(data->temp_max_add[nr-2]));
631 } else { /* TEMP1 */
632 return sprintf(buf, "%ld\n",
633 (long)TEMP_FROM_REG(data->temp_max));
634 }
635 }
636
637 static ssize_t
638 show_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
639 char *buf)
640 {
641 int nr = to_sensor_dev_attr(devattr)->index;
642 struct w83627hf_data *data = w83627hf_update_device(dev);
643 if (nr >= 2) { /* TEMP2 and TEMP3 */
644 return sprintf(buf, "%ld\n",
645 (long)LM75_TEMP_FROM_REG(data->temp_max_hyst_add[nr-2]));
646 } else { /* TEMP1 */
647 return sprintf(buf, "%ld\n",
648 (long)TEMP_FROM_REG(data->temp_max_hyst));
649 }
650 }
651
652 static ssize_t
653 store_temp_max(struct device *dev, struct device_attribute *devattr,
654 const char *buf, size_t count)
655 {
656 int nr = to_sensor_dev_attr(devattr)->index;
657 struct w83627hf_data *data = dev_get_drvdata(dev);
658 long val = simple_strtol(buf, NULL, 10);
659
660 mutex_lock(&data->update_lock);
661
662 if (nr >= 2) { /* TEMP2 and TEMP3 */
663 data->temp_max_add[nr-2] = LM75_TEMP_TO_REG(val);
664 w83627hf_write_value(data, W83781D_REG_TEMP_OVER(nr),
665 data->temp_max_add[nr-2]);
666 } else { /* TEMP1 */
667 data->temp_max = TEMP_TO_REG(val);
668 w83627hf_write_value(data, W83781D_REG_TEMP_OVER(nr),
669 data->temp_max);
670 }
671 mutex_unlock(&data->update_lock);
672 return count;
673 }
674
675 static ssize_t
676 store_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
677 const char *buf, size_t count)
678 {
679 int nr = to_sensor_dev_attr(devattr)->index;
680 struct w83627hf_data *data = dev_get_drvdata(dev);
681 long val = simple_strtol(buf, NULL, 10);
682
683 mutex_lock(&data->update_lock);
684
685 if (nr >= 2) { /* TEMP2 and TEMP3 */
686 data->temp_max_hyst_add[nr-2] = LM75_TEMP_TO_REG(val);
687 w83627hf_write_value(data, W83781D_REG_TEMP_HYST(nr),
688 data->temp_max_hyst_add[nr-2]);
689 } else { /* TEMP1 */
690 data->temp_max_hyst = TEMP_TO_REG(val);
691 w83627hf_write_value(data, W83781D_REG_TEMP_HYST(nr),
692 data->temp_max_hyst);
693 }
694 mutex_unlock(&data->update_lock);
695 return count;
696 }
697
698 #define sysfs_temp_decl(offset) \
699 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
700 show_temp, NULL, offset); \
701 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO|S_IWUSR, \
702 show_temp_max, store_temp_max, offset); \
703 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO|S_IWUSR, \
704 show_temp_max_hyst, store_temp_max_hyst, offset);
705
706 sysfs_temp_decl(1);
707 sysfs_temp_decl(2);
708 sysfs_temp_decl(3);
709
710 static ssize_t
711 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
712 {
713 struct w83627hf_data *data = w83627hf_update_device(dev);
714 return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
715 }
716 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
717
718 static ssize_t
719 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
720 {
721 struct w83627hf_data *data = dev_get_drvdata(dev);
722 return sprintf(buf, "%ld\n", (long) data->vrm);
723 }
724 static ssize_t
725 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
726 {
727 struct w83627hf_data *data = dev_get_drvdata(dev);
728 u32 val;
729
730 val = simple_strtoul(buf, NULL, 10);
731 data->vrm = val;
732
733 return count;
734 }
735 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
736
737 static ssize_t
738 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
739 {
740 struct w83627hf_data *data = w83627hf_update_device(dev);
741 return sprintf(buf, "%ld\n", (long) data->alarms);
742 }
743 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
744
745 #define show_beep_reg(REG, reg) \
746 static ssize_t show_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
747 { \
748 struct w83627hf_data *data = w83627hf_update_device(dev); \
749 return sprintf(buf,"%ld\n", \
750 (long)BEEP_##REG##_FROM_REG(data->beep_##reg)); \
751 }
752 show_beep_reg(ENABLE, enable)
753 show_beep_reg(MASK, mask)
754
755 #define BEEP_ENABLE 0 /* Store beep_enable */
756 #define BEEP_MASK 1 /* Store beep_mask */
757
758 static ssize_t
759 store_beep_reg(struct device *dev, const char *buf, size_t count,
760 int update_mask)
761 {
762 struct w83627hf_data *data = dev_get_drvdata(dev);
763 u32 val, val2;
764
765 val = simple_strtoul(buf, NULL, 10);
766
767 mutex_lock(&data->update_lock);
768
769 if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
770 data->beep_mask = BEEP_MASK_TO_REG(val);
771 w83627hf_write_value(data, W83781D_REG_BEEP_INTS1,
772 data->beep_mask & 0xff);
773 w83627hf_write_value(data, W83781D_REG_BEEP_INTS3,
774 ((data->beep_mask) >> 16) & 0xff);
775 val2 = (data->beep_mask >> 8) & 0x7f;
776 } else { /* We are storing beep_enable */
777 val2 =
778 w83627hf_read_value(data, W83781D_REG_BEEP_INTS2) & 0x7f;
779 data->beep_enable = BEEP_ENABLE_TO_REG(val);
780 }
781
782 w83627hf_write_value(data, W83781D_REG_BEEP_INTS2,
783 val2 | data->beep_enable << 7);
784
785 mutex_unlock(&data->update_lock);
786 return count;
787 }
788
789 #define sysfs_beep(REG, reg) \
790 static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
791 { \
792 return show_beep_##reg(dev, attr, buf); \
793 } \
794 static ssize_t \
795 store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
796 { \
797 return store_beep_reg(dev, buf, count, BEEP_##REG); \
798 } \
799 static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \
800 show_regs_beep_##reg, store_regs_beep_##reg);
801
802 sysfs_beep(ENABLE, enable);
803 sysfs_beep(MASK, mask);
804
805 static ssize_t
806 show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
807 {
808 int nr = to_sensor_dev_attr(devattr)->index;
809 struct w83627hf_data *data = w83627hf_update_device(dev);
810 return sprintf(buf, "%ld\n",
811 (long) DIV_FROM_REG(data->fan_div[nr]));
812 }
813 /* Note: we save and restore the fan minimum here, because its value is
814 determined in part by the fan divisor. This follows the principle of
815 least surprise; the user doesn't expect the fan minimum to change just
816 because the divisor changed. */
817 static ssize_t
818 store_fan_div(struct device *dev, struct device_attribute *devattr,
819 const char *buf, size_t count)
820 {
821 int nr = to_sensor_dev_attr(devattr)->index;
822 struct w83627hf_data *data = dev_get_drvdata(dev);
823 unsigned long min;
824 u8 reg;
825 unsigned long val = simple_strtoul(buf, NULL, 10);
826
827 mutex_lock(&data->update_lock);
828
829 /* Save fan_min */
830 min = FAN_FROM_REG(data->fan_min[nr],
831 DIV_FROM_REG(data->fan_div[nr]));
832
833 data->fan_div[nr] = DIV_TO_REG(val);
834
835 reg = (w83627hf_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
836 & (nr==0 ? 0xcf : 0x3f))
837 | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
838 w83627hf_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
839
840 reg = (w83627hf_read_value(data, W83781D_REG_VBAT)
841 & ~(1 << (5 + nr)))
842 | ((data->fan_div[nr] & 0x04) << (3 + nr));
843 w83627hf_write_value(data, W83781D_REG_VBAT, reg);
844
845 /* Restore fan_min */
846 data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
847 w83627hf_write_value(data, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
848
849 mutex_unlock(&data->update_lock);
850 return count;
851 }
852
853 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO|S_IWUSR,
854 show_fan_div, store_fan_div, 0);
855 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO|S_IWUSR,
856 show_fan_div, store_fan_div, 1);
857 static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO|S_IWUSR,
858 show_fan_div, store_fan_div, 2);
859
860 static ssize_t
861 show_pwm(struct device *dev, struct device_attribute *devattr, char *buf)
862 {
863 int nr = to_sensor_dev_attr(devattr)->index;
864 struct w83627hf_data *data = w83627hf_update_device(dev);
865 return sprintf(buf, "%ld\n", (long) data->pwm[nr]);
866 }
867
868 static ssize_t
869 store_pwm(struct device *dev, struct device_attribute *devattr,
870 const char *buf, size_t count)
871 {
872 int nr = to_sensor_dev_attr(devattr)->index;
873 struct w83627hf_data *data = dev_get_drvdata(dev);
874 u32 val = simple_strtoul(buf, NULL, 10);
875
876 mutex_lock(&data->update_lock);
877
878 if (data->type == w83627thf) {
879 /* bits 0-3 are reserved in 627THF */
880 data->pwm[nr] = PWM_TO_REG(val) & 0xf0;
881 w83627hf_write_value(data,
882 W836X7HF_REG_PWM(data->type, nr),
883 data->pwm[nr] |
884 (w83627hf_read_value(data,
885 W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
886 } else {
887 data->pwm[nr] = PWM_TO_REG(val);
888 w83627hf_write_value(data,
889 W836X7HF_REG_PWM(data->type, nr),
890 data->pwm[nr]);
891 }
892
893 mutex_unlock(&data->update_lock);
894 return count;
895 }
896
897 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0);
898 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
899 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2);
900
901 static ssize_t
902 show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf)
903 {
904 int nr = to_sensor_dev_attr(devattr)->index;
905 struct w83627hf_data *data = w83627hf_update_device(dev);
906 if (data->type == w83627hf)
907 return sprintf(buf, "%ld\n",
908 pwm_freq_from_reg_627hf(data->pwm_freq[nr]));
909 else
910 return sprintf(buf, "%ld\n",
911 pwm_freq_from_reg(data->pwm_freq[nr]));
912 }
913
914 static ssize_t
915 store_pwm_freq(struct device *dev, struct device_attribute *devattr,
916 const char *buf, size_t count)
917 {
918 int nr = to_sensor_dev_attr(devattr)->index;
919 struct w83627hf_data *data = dev_get_drvdata(dev);
920 static const u8 mask[]={0xF8, 0x8F};
921 u32 val;
922
923 val = simple_strtoul(buf, NULL, 10);
924
925 mutex_lock(&data->update_lock);
926
927 if (data->type == w83627hf) {
928 data->pwm_freq[nr] = pwm_freq_to_reg_627hf(val);
929 w83627hf_write_value(data, W83627HF_REG_PWM_FREQ,
930 (data->pwm_freq[nr] << (nr*4)) |
931 (w83627hf_read_value(data,
932 W83627HF_REG_PWM_FREQ) & mask[nr]));
933 } else {
934 data->pwm_freq[nr] = pwm_freq_to_reg(val);
935 w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr],
936 data->pwm_freq[nr]);
937 }
938
939 mutex_unlock(&data->update_lock);
940 return count;
941 }
942
943 static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO|S_IWUSR,
944 show_pwm_freq, store_pwm_freq, 0);
945 static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO|S_IWUSR,
946 show_pwm_freq, store_pwm_freq, 1);
947 static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO|S_IWUSR,
948 show_pwm_freq, store_pwm_freq, 2);
949
950 static ssize_t
951 show_temp_type(struct device *dev, struct device_attribute *devattr,
952 char *buf)
953 {
954 int nr = to_sensor_dev_attr(devattr)->index;
955 struct w83627hf_data *data = w83627hf_update_device(dev);
956 return sprintf(buf, "%ld\n", (long) data->sens[nr]);
957 }
958
959 static ssize_t
960 store_temp_type(struct device *dev, struct device_attribute *devattr,
961 const char *buf, size_t count)
962 {
963 int nr = to_sensor_dev_attr(devattr)->index;
964 struct w83627hf_data *data = dev_get_drvdata(dev);
965 u32 val, tmp;
966
967 val = simple_strtoul(buf, NULL, 10);
968
969 mutex_lock(&data->update_lock);
970
971 switch (val) {
972 case 1: /* PII/Celeron diode */
973 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
974 w83627hf_write_value(data, W83781D_REG_SCFG1,
975 tmp | BIT_SCFG1[nr]);
976 tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
977 w83627hf_write_value(data, W83781D_REG_SCFG2,
978 tmp | BIT_SCFG2[nr]);
979 data->sens[nr] = val;
980 break;
981 case 2: /* 3904 */
982 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
983 w83627hf_write_value(data, W83781D_REG_SCFG1,
984 tmp | BIT_SCFG1[nr]);
985 tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
986 w83627hf_write_value(data, W83781D_REG_SCFG2,
987 tmp & ~BIT_SCFG2[nr]);
988 data->sens[nr] = val;
989 break;
990 case W83781D_DEFAULT_BETA:
991 dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
992 "instead\n", W83781D_DEFAULT_BETA);
993 /* fall through */
994 case 4: /* thermistor */
995 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
996 w83627hf_write_value(data, W83781D_REG_SCFG1,
997 tmp & ~BIT_SCFG1[nr]);
998 data->sens[nr] = val;
999 break;
1000 default:
1001 dev_err(dev,
1002 "Invalid sensor type %ld; must be 1, 2, or 4\n",
1003 (long) val);
1004 break;
1005 }
1006
1007 mutex_unlock(&data->update_lock);
1008 return count;
1009 }
1010
1011 #define sysfs_temp_type(offset) \
1012 static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
1013 show_temp_type, store_temp_type, offset - 1);
1014
1015 sysfs_temp_type(1);
1016 sysfs_temp_type(2);
1017 sysfs_temp_type(3);
1018
1019 static ssize_t
1020 show_name(struct device *dev, struct device_attribute *devattr, char *buf)
1021 {
1022 struct w83627hf_data *data = dev_get_drvdata(dev);
1023
1024 return sprintf(buf, "%s\n", data->name);
1025 }
1026 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
1027
1028 static int __init w83627hf_find(int sioaddr, unsigned short *addr,
1029 struct w83627hf_sio_data *sio_data)
1030 {
1031 int err = -ENODEV;
1032 u16 val;
1033
1034 static const __initdata char *names[] = {
1035 "W83627HF",
1036 "W83627THF",
1037 "W83697HF",
1038 "W83637HF",
1039 "W83687THF",
1040 };
1041
1042 REG = sioaddr;
1043 VAL = sioaddr + 1;
1044
1045 superio_enter();
1046 val= superio_inb(DEVID);
1047 switch (val) {
1048 case W627_DEVID:
1049 sio_data->type = w83627hf;
1050 break;
1051 case W627THF_DEVID:
1052 sio_data->type = w83627thf;
1053 break;
1054 case W697_DEVID:
1055 sio_data->type = w83697hf;
1056 break;
1057 case W637_DEVID:
1058 sio_data->type = w83637hf;
1059 break;
1060 case W687THF_DEVID:
1061 sio_data->type = w83687thf;
1062 break;
1063 case 0xff: /* No device at all */
1064 goto exit;
1065 default:
1066 pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%02x)\n", val);
1067 goto exit;
1068 }
1069
1070 superio_select(W83627HF_LD_HWM);
1071 force_addr &= WINB_ALIGNMENT;
1072 if (force_addr) {
1073 printk(KERN_WARNING DRVNAME ": Forcing address 0x%x\n",
1074 force_addr);
1075 superio_outb(WINB_BASE_REG, force_addr >> 8);
1076 superio_outb(WINB_BASE_REG + 1, force_addr & 0xff);
1077 }
1078 val = (superio_inb(WINB_BASE_REG) << 8) |
1079 superio_inb(WINB_BASE_REG + 1);
1080 *addr = val & WINB_ALIGNMENT;
1081 if (*addr == 0) {
1082 printk(KERN_WARNING DRVNAME ": Base address not set, "
1083 "skipping\n");
1084 goto exit;
1085 }
1086
1087 val = superio_inb(WINB_ACT_REG);
1088 if (!(val & 0x01)) {
1089 printk(KERN_WARNING DRVNAME ": Enabling HWM logical device\n");
1090 superio_outb(WINB_ACT_REG, val | 0x01);
1091 }
1092
1093 err = 0;
1094 pr_info(DRVNAME ": Found %s chip at %#x\n",
1095 names[sio_data->type], *addr);
1096
1097 exit:
1098 superio_exit();
1099 return err;
1100 }
1101
1102 #define VIN_UNIT_ATTRS(_X_) \
1103 &sensor_dev_attr_in##_X_##_input.dev_attr.attr, \
1104 &sensor_dev_attr_in##_X_##_min.dev_attr.attr, \
1105 &sensor_dev_attr_in##_X_##_max.dev_attr.attr
1106
1107 #define FAN_UNIT_ATTRS(_X_) \
1108 &sensor_dev_attr_fan##_X_##_input.dev_attr.attr, \
1109 &sensor_dev_attr_fan##_X_##_min.dev_attr.attr, \
1110 &sensor_dev_attr_fan##_X_##_div.dev_attr.attr
1111
1112 #define TEMP_UNIT_ATTRS(_X_) \
1113 &sensor_dev_attr_temp##_X_##_input.dev_attr.attr, \
1114 &sensor_dev_attr_temp##_X_##_max.dev_attr.attr, \
1115 &sensor_dev_attr_temp##_X_##_max_hyst.dev_attr.attr, \
1116 &sensor_dev_attr_temp##_X_##_type.dev_attr.attr
1117
1118 static struct attribute *w83627hf_attributes[] = {
1119 &dev_attr_in0_input.attr,
1120 &dev_attr_in0_min.attr,
1121 &dev_attr_in0_max.attr,
1122 VIN_UNIT_ATTRS(2),
1123 VIN_UNIT_ATTRS(3),
1124 VIN_UNIT_ATTRS(4),
1125 VIN_UNIT_ATTRS(7),
1126 VIN_UNIT_ATTRS(8),
1127
1128 FAN_UNIT_ATTRS(1),
1129 FAN_UNIT_ATTRS(2),
1130
1131 TEMP_UNIT_ATTRS(1),
1132 TEMP_UNIT_ATTRS(2),
1133
1134 &dev_attr_alarms.attr,
1135 &dev_attr_beep_enable.attr,
1136 &dev_attr_beep_mask.attr,
1137
1138 &sensor_dev_attr_pwm1.dev_attr.attr,
1139 &sensor_dev_attr_pwm2.dev_attr.attr,
1140 &dev_attr_name.attr,
1141 NULL
1142 };
1143
1144 static const struct attribute_group w83627hf_group = {
1145 .attrs = w83627hf_attributes,
1146 };
1147
1148 static struct attribute *w83627hf_attributes_opt[] = {
1149 VIN_UNIT_ATTRS(1),
1150 VIN_UNIT_ATTRS(5),
1151 VIN_UNIT_ATTRS(6),
1152
1153 FAN_UNIT_ATTRS(3),
1154 TEMP_UNIT_ATTRS(3),
1155 &sensor_dev_attr_pwm3.dev_attr.attr,
1156
1157 &sensor_dev_attr_pwm1_freq.dev_attr.attr,
1158 &sensor_dev_attr_pwm2_freq.dev_attr.attr,
1159 &sensor_dev_attr_pwm3_freq.dev_attr.attr,
1160 NULL
1161 };
1162
1163 static const struct attribute_group w83627hf_group_opt = {
1164 .attrs = w83627hf_attributes_opt,
1165 };
1166
1167 static int __devinit w83627hf_probe(struct platform_device *pdev)
1168 {
1169 struct device *dev = &pdev->dev;
1170 struct w83627hf_sio_data *sio_data = dev->platform_data;
1171 struct w83627hf_data *data;
1172 struct resource *res;
1173 int err;
1174
1175 static const char *names[] = {
1176 "w83627hf",
1177 "w83627thf",
1178 "w83697hf",
1179 "w83637hf",
1180 "w83687thf",
1181 };
1182
1183 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1184 if (!request_region(res->start, WINB_REGION_SIZE, DRVNAME)) {
1185 dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
1186 (unsigned long)res->start,
1187 (unsigned long)(res->start + WINB_REGION_SIZE - 1));
1188 err = -EBUSY;
1189 goto ERROR0;
1190 }
1191
1192 if (!(data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
1193 err = -ENOMEM;
1194 goto ERROR1;
1195 }
1196 data->addr = res->start;
1197 data->type = sio_data->type;
1198 data->name = names[sio_data->type];
1199 mutex_init(&data->lock);
1200 mutex_init(&data->update_lock);
1201 platform_set_drvdata(pdev, data);
1202
1203 /* Initialize the chip */
1204 w83627hf_init_device(pdev);
1205
1206 /* A few vars need to be filled upon startup */
1207 data->fan_min[0] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(1));
1208 data->fan_min[1] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(2));
1209 data->fan_min[2] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(3));
1210 w83627hf_update_fan_div(data);
1211
1212 /* Register common device attributes */
1213 if ((err = sysfs_create_group(&dev->kobj, &w83627hf_group)))
1214 goto ERROR3;
1215
1216 /* Register chip-specific device attributes */
1217 if (data->type == w83627hf || data->type == w83697hf)
1218 if ((err = device_create_file(dev,
1219 &sensor_dev_attr_in5_input.dev_attr))
1220 || (err = device_create_file(dev,
1221 &sensor_dev_attr_in5_min.dev_attr))
1222 || (err = device_create_file(dev,
1223 &sensor_dev_attr_in5_max.dev_attr))
1224 || (err = device_create_file(dev,
1225 &sensor_dev_attr_in6_input.dev_attr))
1226 || (err = device_create_file(dev,
1227 &sensor_dev_attr_in6_min.dev_attr))
1228 || (err = device_create_file(dev,
1229 &sensor_dev_attr_in6_max.dev_attr))
1230 || (err = device_create_file(dev,
1231 &sensor_dev_attr_pwm1_freq.dev_attr))
1232 || (err = device_create_file(dev,
1233 &sensor_dev_attr_pwm2_freq.dev_attr)))
1234 goto ERROR4;
1235
1236 if (data->type != w83697hf)
1237 if ((err = device_create_file(dev,
1238 &sensor_dev_attr_in1_input.dev_attr))
1239 || (err = device_create_file(dev,
1240 &sensor_dev_attr_in1_min.dev_attr))
1241 || (err = device_create_file(dev,
1242 &sensor_dev_attr_in1_max.dev_attr))
1243 || (err = device_create_file(dev,
1244 &sensor_dev_attr_fan3_input.dev_attr))
1245 || (err = device_create_file(dev,
1246 &sensor_dev_attr_fan3_min.dev_attr))
1247 || (err = device_create_file(dev,
1248 &sensor_dev_attr_fan3_div.dev_attr))
1249 || (err = device_create_file(dev,
1250 &sensor_dev_attr_temp3_input.dev_attr))
1251 || (err = device_create_file(dev,
1252 &sensor_dev_attr_temp3_max.dev_attr))
1253 || (err = device_create_file(dev,
1254 &sensor_dev_attr_temp3_max_hyst.dev_attr))
1255 || (err = device_create_file(dev,
1256 &sensor_dev_attr_temp3_type.dev_attr)))
1257 goto ERROR4;
1258
1259 if (data->type != w83697hf && data->vid != 0xff) {
1260 /* Convert VID to voltage based on VRM */
1261 data->vrm = vid_which_vrm();
1262
1263 if ((err = device_create_file(dev, &dev_attr_cpu0_vid))
1264 || (err = device_create_file(dev, &dev_attr_vrm)))
1265 goto ERROR4;
1266 }
1267
1268 if (data->type == w83627thf || data->type == w83637hf
1269 || data->type == w83687thf)
1270 if ((err = device_create_file(dev,
1271 &sensor_dev_attr_pwm3.dev_attr)))
1272 goto ERROR4;
1273
1274 if (data->type == w83637hf || data->type == w83687thf)
1275 if ((err = device_create_file(dev,
1276 &sensor_dev_attr_pwm1_freq.dev_attr))
1277 || (err = device_create_file(dev,
1278 &sensor_dev_attr_pwm2_freq.dev_attr))
1279 || (err = device_create_file(dev,
1280 &sensor_dev_attr_pwm3_freq.dev_attr)))
1281 goto ERROR4;
1282
1283 data->hwmon_dev = hwmon_device_register(dev);
1284 if (IS_ERR(data->hwmon_dev)) {
1285 err = PTR_ERR(data->hwmon_dev);
1286 goto ERROR4;
1287 }
1288
1289 return 0;
1290
1291 ERROR4:
1292 sysfs_remove_group(&dev->kobj, &w83627hf_group);
1293 sysfs_remove_group(&dev->kobj, &w83627hf_group_opt);
1294 ERROR3:
1295 platform_set_drvdata(pdev, NULL);
1296 kfree(data);
1297 ERROR1:
1298 release_region(res->start, WINB_REGION_SIZE);
1299 ERROR0:
1300 return err;
1301 }
1302
1303 static int __devexit w83627hf_remove(struct platform_device *pdev)
1304 {
1305 struct w83627hf_data *data = platform_get_drvdata(pdev);
1306 struct resource *res;
1307
1308 hwmon_device_unregister(data->hwmon_dev);
1309
1310 sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group);
1311 sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt);
1312 platform_set_drvdata(pdev, NULL);
1313 kfree(data);
1314
1315 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1316 release_region(res->start, WINB_REGION_SIZE);
1317
1318 return 0;
1319 }
1320
1321
1322 /* Registers 0x50-0x5f are banked */
1323 static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg)
1324 {
1325 if ((reg & 0x00f0) == 0x50) {
1326 outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
1327 outb_p(reg >> 8, data->addr + W83781D_DATA_REG_OFFSET);
1328 }
1329 }
1330
1331 /* Not strictly necessary, but play it safe for now */
1332 static inline void w83627hf_reset_bank(struct w83627hf_data *data, u16 reg)
1333 {
1334 if (reg & 0xff00) {
1335 outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
1336 outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
1337 }
1338 }
1339
1340 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
1341 {
1342 int res, word_sized;
1343
1344 mutex_lock(&data->lock);
1345 word_sized = (((reg & 0xff00) == 0x100)
1346 || ((reg & 0xff00) == 0x200))
1347 && (((reg & 0x00ff) == 0x50)
1348 || ((reg & 0x00ff) == 0x53)
1349 || ((reg & 0x00ff) == 0x55));
1350 w83627hf_set_bank(data, reg);
1351 outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1352 res = inb_p(data->addr + W83781D_DATA_REG_OFFSET);
1353 if (word_sized) {
1354 outb_p((reg & 0xff) + 1,
1355 data->addr + W83781D_ADDR_REG_OFFSET);
1356 res =
1357 (res << 8) + inb_p(data->addr +
1358 W83781D_DATA_REG_OFFSET);
1359 }
1360 w83627hf_reset_bank(data, reg);
1361 mutex_unlock(&data->lock);
1362 return res;
1363 }
1364
1365 static int __devinit w83627thf_read_gpio5(struct platform_device *pdev)
1366 {
1367 int res = 0xff, sel;
1368
1369 superio_enter();
1370 superio_select(W83627HF_LD_GPIO5);
1371
1372 /* Make sure these GPIO pins are enabled */
1373 if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) {
1374 dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
1375 goto exit;
1376 }
1377
1378 /* Make sure the pins are configured for input
1379 There must be at least five (VRM 9), and possibly 6 (VRM 10) */
1380 sel = superio_inb(W83627THF_GPIO5_IOSR) & 0x3f;
1381 if ((sel & 0x1f) != 0x1f) {
1382 dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
1383 "function\n");
1384 goto exit;
1385 }
1386
1387 dev_info(&pdev->dev, "Reading VID from GPIO5\n");
1388 res = superio_inb(W83627THF_GPIO5_DR) & sel;
1389
1390 exit:
1391 superio_exit();
1392 return res;
1393 }
1394
1395 static int __devinit w83687thf_read_vid(struct platform_device *pdev)
1396 {
1397 int res = 0xff;
1398
1399 superio_enter();
1400 superio_select(W83627HF_LD_HWM);
1401
1402 /* Make sure these GPIO pins are enabled */
1403 if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) {
1404 dev_dbg(&pdev->dev, "VID disabled, no VID function\n");
1405 goto exit;
1406 }
1407
1408 /* Make sure the pins are configured for input */
1409 if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) {
1410 dev_dbg(&pdev->dev, "VID configured as output, "
1411 "no VID function\n");
1412 goto exit;
1413 }
1414
1415 res = superio_inb(W83687THF_VID_DATA) & 0x3f;
1416
1417 exit:
1418 superio_exit();
1419 return res;
1420 }
1421
1422 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value)
1423 {
1424 int word_sized;
1425
1426 mutex_lock(&data->lock);
1427 word_sized = (((reg & 0xff00) == 0x100)
1428 || ((reg & 0xff00) == 0x200))
1429 && (((reg & 0x00ff) == 0x53)
1430 || ((reg & 0x00ff) == 0x55));
1431 w83627hf_set_bank(data, reg);
1432 outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1433 if (word_sized) {
1434 outb_p(value >> 8,
1435 data->addr + W83781D_DATA_REG_OFFSET);
1436 outb_p((reg & 0xff) + 1,
1437 data->addr + W83781D_ADDR_REG_OFFSET);
1438 }
1439 outb_p(value & 0xff,
1440 data->addr + W83781D_DATA_REG_OFFSET);
1441 w83627hf_reset_bank(data, reg);
1442 mutex_unlock(&data->lock);
1443 return 0;
1444 }
1445
1446 static void __devinit w83627hf_init_device(struct platform_device *pdev)
1447 {
1448 struct w83627hf_data *data = platform_get_drvdata(pdev);
1449 int i;
1450 enum chips type = data->type;
1451 u8 tmp;
1452
1453 if (reset) {
1454 /* Resetting the chip has been the default for a long time,
1455 but repeatedly caused problems (fans going to full
1456 speed...) so it is now optional. It might even go away if
1457 nobody reports it as being useful, as I see very little
1458 reason why this would be needed at all. */
1459 dev_info(&pdev->dev, "If reset=1 solved a problem you were "
1460 "having, please report!\n");
1461
1462 /* save this register */
1463 i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG);
1464 /* Reset all except Watchdog values and last conversion values
1465 This sets fan-divs to 2, among others */
1466 w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80);
1467 /* Restore the register and disable power-on abnormal beep.
1468 This saves FAN 1/2/3 input/output values set by BIOS. */
1469 w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1470 /* Disable master beep-enable (reset turns it on).
1471 Individual beeps should be reset to off but for some reason
1472 disabling this bit helps some people not get beeped */
1473 w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0);
1474 }
1475
1476 /* Minimize conflicts with other winbond i2c-only clients... */
1477 /* disable i2c subclients... how to disable main i2c client?? */
1478 /* force i2c address to relatively uncommon address */
1479 w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89);
1480 w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c);
1481
1482 /* Read VID only once */
1483 if (type == w83627hf || type == w83637hf) {
1484 int lo = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1485 int hi = w83627hf_read_value(data, W83781D_REG_CHIPID);
1486 data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
1487 } else if (type == w83627thf) {
1488 data->vid = w83627thf_read_gpio5(pdev);
1489 } else if (type == w83687thf) {
1490 data->vid = w83687thf_read_vid(pdev);
1491 }
1492
1493 /* Read VRM & OVT Config only once */
1494 if (type == w83627thf || type == w83637hf || type == w83687thf) {
1495 data->vrm_ovt =
1496 w83627hf_read_value(data, W83627THF_REG_VRM_OVT_CFG);
1497 }
1498
1499 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1500 for (i = 1; i <= 3; i++) {
1501 if (!(tmp & BIT_SCFG1[i - 1])) {
1502 data->sens[i - 1] = 4;
1503 } else {
1504 if (w83627hf_read_value
1505 (data,
1506 W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1507 data->sens[i - 1] = 1;
1508 else
1509 data->sens[i - 1] = 2;
1510 }
1511 if ((type == w83697hf) && (i == 2))
1512 break;
1513 }
1514
1515 if(init) {
1516 /* Enable temp2 */
1517 tmp = w83627hf_read_value(data, W83781D_REG_TEMP2_CONFIG);
1518 if (tmp & 0x01) {
1519 dev_warn(&pdev->dev, "Enabling temp2, readings "
1520 "might not make sense\n");
1521 w83627hf_write_value(data, W83781D_REG_TEMP2_CONFIG,
1522 tmp & 0xfe);
1523 }
1524
1525 /* Enable temp3 */
1526 if (type != w83697hf) {
1527 tmp = w83627hf_read_value(data,
1528 W83781D_REG_TEMP3_CONFIG);
1529 if (tmp & 0x01) {
1530 dev_warn(&pdev->dev, "Enabling temp3, "
1531 "readings might not make sense\n");
1532 w83627hf_write_value(data,
1533 W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1534 }
1535 }
1536 }
1537
1538 /* Start monitoring */
1539 w83627hf_write_value(data, W83781D_REG_CONFIG,
1540 (w83627hf_read_value(data,
1541 W83781D_REG_CONFIG) & 0xf7)
1542 | 0x01);
1543 }
1544
1545 static void w83627hf_update_fan_div(struct w83627hf_data *data)
1546 {
1547 int reg;
1548
1549 reg = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1550 data->fan_div[0] = (reg >> 4) & 0x03;
1551 data->fan_div[1] = (reg >> 6) & 0x03;
1552 if (data->type != w83697hf) {
1553 data->fan_div[2] = (w83627hf_read_value(data,
1554 W83781D_REG_PIN) >> 6) & 0x03;
1555 }
1556 reg = w83627hf_read_value(data, W83781D_REG_VBAT);
1557 data->fan_div[0] |= (reg >> 3) & 0x04;
1558 data->fan_div[1] |= (reg >> 4) & 0x04;
1559 if (data->type != w83697hf)
1560 data->fan_div[2] |= (reg >> 5) & 0x04;
1561 }
1562
1563 static struct w83627hf_data *w83627hf_update_device(struct device *dev)
1564 {
1565 struct w83627hf_data *data = dev_get_drvdata(dev);
1566 int i;
1567
1568 mutex_lock(&data->update_lock);
1569
1570 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1571 || !data->valid) {
1572 for (i = 0; i <= 8; i++) {
1573 /* skip missing sensors */
1574 if (((data->type == w83697hf) && (i == 1)) ||
1575 ((data->type != w83627hf && data->type != w83697hf)
1576 && (i == 5 || i == 6)))
1577 continue;
1578 data->in[i] =
1579 w83627hf_read_value(data, W83781D_REG_IN(i));
1580 data->in_min[i] =
1581 w83627hf_read_value(data,
1582 W83781D_REG_IN_MIN(i));
1583 data->in_max[i] =
1584 w83627hf_read_value(data,
1585 W83781D_REG_IN_MAX(i));
1586 }
1587 for (i = 1; i <= 3; i++) {
1588 data->fan[i - 1] =
1589 w83627hf_read_value(data, W83781D_REG_FAN(i));
1590 data->fan_min[i - 1] =
1591 w83627hf_read_value(data,
1592 W83781D_REG_FAN_MIN(i));
1593 }
1594 for (i = 0; i <= 2; i++) {
1595 u8 tmp = w83627hf_read_value(data,
1596 W836X7HF_REG_PWM(data->type, i));
1597 /* bits 0-3 are reserved in 627THF */
1598 if (data->type == w83627thf)
1599 tmp &= 0xf0;
1600 data->pwm[i] = tmp;
1601 if (i == 1 &&
1602 (data->type == w83627hf || data->type == w83697hf))
1603 break;
1604 }
1605 if (data->type == w83627hf) {
1606 u8 tmp = w83627hf_read_value(data,
1607 W83627HF_REG_PWM_FREQ);
1608 data->pwm_freq[0] = tmp & 0x07;
1609 data->pwm_freq[1] = (tmp >> 4) & 0x07;
1610 } else if (data->type != w83627thf) {
1611 for (i = 1; i <= 3; i++) {
1612 data->pwm_freq[i - 1] =
1613 w83627hf_read_value(data,
1614 W83637HF_REG_PWM_FREQ[i - 1]);
1615 if (i == 2 && (data->type == w83697hf))
1616 break;
1617 }
1618 }
1619
1620 data->temp = w83627hf_read_value(data, W83781D_REG_TEMP(1));
1621 data->temp_max =
1622 w83627hf_read_value(data, W83781D_REG_TEMP_OVER(1));
1623 data->temp_max_hyst =
1624 w83627hf_read_value(data, W83781D_REG_TEMP_HYST(1));
1625 data->temp_add[0] =
1626 w83627hf_read_value(data, W83781D_REG_TEMP(2));
1627 data->temp_max_add[0] =
1628 w83627hf_read_value(data, W83781D_REG_TEMP_OVER(2));
1629 data->temp_max_hyst_add[0] =
1630 w83627hf_read_value(data, W83781D_REG_TEMP_HYST(2));
1631 if (data->type != w83697hf) {
1632 data->temp_add[1] =
1633 w83627hf_read_value(data, W83781D_REG_TEMP(3));
1634 data->temp_max_add[1] =
1635 w83627hf_read_value(data, W83781D_REG_TEMP_OVER(3));
1636 data->temp_max_hyst_add[1] =
1637 w83627hf_read_value(data, W83781D_REG_TEMP_HYST(3));
1638 }
1639
1640 w83627hf_update_fan_div(data);
1641
1642 data->alarms =
1643 w83627hf_read_value(data, W83781D_REG_ALARM1) |
1644 (w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) |
1645 (w83627hf_read_value(data, W83781D_REG_ALARM3) << 16);
1646 i = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
1647 data->beep_enable = i >> 7;
1648 data->beep_mask = ((i & 0x7f) << 8) |
1649 w83627hf_read_value(data, W83781D_REG_BEEP_INTS1) |
1650 w83627hf_read_value(data, W83781D_REG_BEEP_INTS3) << 16;
1651 data->last_updated = jiffies;
1652 data->valid = 1;
1653 }
1654
1655 mutex_unlock(&data->update_lock);
1656
1657 return data;
1658 }
1659
1660 static int __init w83627hf_device_add(unsigned short address,
1661 const struct w83627hf_sio_data *sio_data)
1662 {
1663 struct resource res = {
1664 .start = address + WINB_REGION_OFFSET,
1665 .end = address + WINB_REGION_OFFSET + WINB_REGION_SIZE - 1,
1666 .name = DRVNAME,
1667 .flags = IORESOURCE_IO,
1668 };
1669 int err;
1670
1671 pdev = platform_device_alloc(DRVNAME, address);
1672 if (!pdev) {
1673 err = -ENOMEM;
1674 printk(KERN_ERR DRVNAME ": Device allocation failed\n");
1675 goto exit;
1676 }
1677
1678 err = platform_device_add_resources(pdev, &res, 1);
1679 if (err) {
1680 printk(KERN_ERR DRVNAME ": Device resource addition failed "
1681 "(%d)\n", err);
1682 goto exit_device_put;
1683 }
1684
1685 err = platform_device_add_data(pdev, sio_data,
1686 sizeof(struct w83627hf_sio_data));
1687 if (err) {
1688 printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
1689 goto exit_device_put;
1690 }
1691
1692 err = platform_device_add(pdev);
1693 if (err) {
1694 printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
1695 err);
1696 goto exit_device_put;
1697 }
1698
1699 return 0;
1700
1701 exit_device_put:
1702 platform_device_put(pdev);
1703 exit:
1704 return err;
1705 }
1706
1707 static int __init sensors_w83627hf_init(void)
1708 {
1709 int err;
1710 unsigned short address;
1711 struct w83627hf_sio_data sio_data;
1712
1713 if (w83627hf_find(0x2e, &address, &sio_data)
1714 && w83627hf_find(0x4e, &address, &sio_data))
1715 return -ENODEV;
1716
1717 err = platform_driver_register(&w83627hf_driver);
1718 if (err)
1719 goto exit;
1720
1721 /* Sets global pdev as a side effect */
1722 err = w83627hf_device_add(address, &sio_data);
1723 if (err)
1724 goto exit_driver;
1725
1726 return 0;
1727
1728 exit_driver:
1729 platform_driver_unregister(&w83627hf_driver);
1730 exit:
1731 return err;
1732 }
1733
1734 static void __exit sensors_w83627hf_exit(void)
1735 {
1736 platform_device_unregister(pdev);
1737 platform_driver_unregister(&w83627hf_driver);
1738 }
1739
1740 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
1741 "Philip Edelbrock <phil@netroedge.com>, "
1742 "and Mark Studebaker <mdsxyz123@yahoo.com>");
1743 MODULE_DESCRIPTION("W83627HF driver");
1744 MODULE_LICENSE("GPL");
1745
1746 module_init(sensors_w83627hf_init);
1747 module_exit(sensors_w83627hf_exit);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree