drivers/hwmon/smsc47m1.c

   1 /*
   2     smsc47m1.c - Part of lm_sensors, Linux kernel modules
   3                  for hardware monitoring
   4
   5     Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x,
   6     LPC47M14x, LPC47M15x, LPC47M192, LPC47M292 and LPC47M997
   7     Super-I/O chips.
   8
   9     Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
  10     Copyright (C) 2004-2007 Jean Delvare <khali@linux-fr.org>
  11     Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
  12                         and Jean Delvare
  13
  14     This program is free software; you can redistribute it and/or modify
  15     it under the terms of the GNU General Public License as published by
  16     the Free Software Foundation; either version 2 of the License, or
  17     (at your option) any later version.
  18
  19     This program is distributed in the hope that it will be useful,
  20     but WITHOUT ANY WARRANTY; without even the implied warranty of
  21     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22     GNU General Public License for more details.
  23
  24     You should have received a copy of the GNU General Public License
  25     along with this program; if not, write to the Free Software
  26     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  27 */
  28
  29 #include <linux/module.h>
  30 #include <linux/slab.h>
  31 #include <linux/ioport.h>
  32 #include <linux/jiffies.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/hwmon.h>
  35 #include <linux/hwmon-sysfs.h>
  36 #include <linux/err.h>
  37 #include <linux/init.h>
  38 #include <linux/mutex.h>
  39 #include <linux/sysfs.h>
  40 #include <asm/io.h>
  41
  42 static struct platform_device *pdev;
  43
  44 #define DRVNAME "smsc47m1"
  45 enum chips { smsc47m1, smsc47m2 };
  46
  47 /* Super-I/0 registers and commands */
  48
  49 #define REG     0x2e    /* The register to read/write */
  50 #define VAL     0x2f    /* The value to read/write */
  51
  52 static inline void
  53 superio_outb(int reg, int val)
  54 {
  55         outb(reg, REG);
  56         outb(val, VAL);
  57 }
  58
  59 static inline int
  60 superio_inb(int reg)
  61 {
  62         outb(reg, REG);
  63         return inb(VAL);
  64 }
  65
  66 /* logical device for fans is 0x0A */
  67 #define superio_select() superio_outb(0x07, 0x0A)
  68
  69 static inline void
  70 superio_enter(void)
  71 {
  72         outb(0x55, REG);
  73 }
  74
  75 static inline void
  76 superio_exit(void)
  77 {
  78         outb(0xAA, REG);
  79 }
  80
  81 #define SUPERIO_REG_ACT         0x30
  82 #define SUPERIO_REG_BASE        0x60
  83 #define SUPERIO_REG_DEVID       0x20
  84
  85 /* Logical device registers */
  86
  87 #define SMSC_EXTENT             0x80
  88
  89 /* nr is 0 or 1 in the macros below */
  90 #define SMSC47M1_REG_ALARM              0x04
  91 #define SMSC47M1_REG_TPIN(nr)           (0x34 - (nr))
  92 #define SMSC47M1_REG_PPIN(nr)           (0x36 - (nr))
  93 #define SMSC47M1_REG_FANDIV             0x58
  94
  95 static const u8 SMSC47M1_REG_FAN[3]             = { 0x59, 0x5a, 0x6b };
  96 static const u8 SMSC47M1_REG_FAN_PRELOAD[3]     = { 0x5b, 0x5c, 0x6c };
  97 static const u8 SMSC47M1_REG_PWM[3]             = { 0x56, 0x57, 0x69 };
  98
  99 #define SMSC47M2_REG_ALARM6             0x09
 100 #define SMSC47M2_REG_TPIN1              0x38
 101 #define SMSC47M2_REG_TPIN2              0x37
 102 #define SMSC47M2_REG_TPIN3              0x2d
 103 #define SMSC47M2_REG_PPIN3              0x2c
 104 #define SMSC47M2_REG_FANDIV3            0x6a
 105
 106 #define MIN_FROM_REG(reg,div)           ((reg)>=192 ? 0 : \
 107                                          983040/((192-(reg))*(div)))
 108 #define FAN_FROM_REG(reg,div,preload)   ((reg)<=(preload) || (reg)==255 ? 0 : \
 109                                          983040/(((reg)-(preload))*(div)))
 110 #define DIV_FROM_REG(reg)               (1 << (reg))
 111 #define PWM_FROM_REG(reg)               (((reg) & 0x7E) << 1)
 112 #define PWM_EN_FROM_REG(reg)            ((~(reg)) & 0x01)
 113 #define PWM_TO_REG(reg)                 (((reg) >> 1) & 0x7E)
 114
 115 struct smsc47m1_data {
 116         unsigned short addr;
 117         const char *name;
 118         enum chips type;
 119         struct device *hwmon_dev;
 120
 121         struct mutex update_lock;
 122         unsigned long last_updated;     /* In jiffies */
 123
 124         u8 fan[3];              /* Register value */
 125         u8 fan_preload[3];      /* Register value */
 126         u8 fan_div[3];          /* Register encoding, shifted right */
 127         u8 alarms;              /* Register encoding */
 128         u8 pwm[3];              /* Register value (bit 0 is disable) */
 129 };
 130
 131 struct smsc47m1_sio_data {
 132         enum chips type;
 133 };
 134
 135
 136 static int smsc47m1_probe(struct platform_device *pdev);
 137 static int __devexit smsc47m1_remove(struct platform_device *pdev);
 138 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 139                 int init);
 140
 141 static inline int smsc47m1_read_value(struct smsc47m1_data *data, u8 reg)
 142 {
 143         return inb_p(data->addr + reg);
 144 }
 145
 146 static inline void smsc47m1_write_value(struct smsc47m1_data *data, u8 reg,
 147                 u8 value)
 148 {
 149         outb_p(value, data->addr + reg);
 150 }
 151
 152 static struct platform_driver smsc47m1_driver = {
 153         .driver = {
 154                 .owner  = THIS_MODULE,
 155                 .name   = DRVNAME,
 156         },
 157         .probe          = smsc47m1_probe,
 158         .remove         = __devexit_p(smsc47m1_remove),
 159 };
 160
 161 static ssize_t get_fan(struct device *dev, struct device_attribute
 162                        *devattr, char *buf)
 163 {
 164         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 165         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 166         int nr = attr->index;
 167         /* This chip (stupidly) stops monitoring fan speed if PWM is
 168            enabled and duty cycle is 0%. This is fine if the monitoring
 169            and control concern the same fan, but troublesome if they are
 170            not (which could as well happen). */
 171         int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
 172                   FAN_FROM_REG(data->fan[nr],
 173                                DIV_FROM_REG(data->fan_div[nr]),
 174                                data->fan_preload[nr]);
 175         return sprintf(buf, "%d\n", rpm);
 176 }
 177
 178 static ssize_t get_fan_min(struct device *dev, struct device_attribute
 179                            *devattr, char *buf)
 180 {
 181         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 182         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 183         int nr = attr->index;
 184         int rpm = MIN_FROM_REG(data->fan_preload[nr],
 185                                DIV_FROM_REG(data->fan_div[nr]));
 186         return sprintf(buf, "%d\n", rpm);
 187 }
 188
 189 static ssize_t get_fan_div(struct device *dev, struct device_attribute
 190                            *devattr, char *buf)
 191 {
 192         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 193         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 194         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
 195 }
 196
 197 static ssize_t get_pwm(struct device *dev, struct device_attribute
 198                        *devattr, char *buf)
 199 {
 200         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 201         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 202         return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[attr->index]));
 203 }
 204
 205 static ssize_t get_pwm_en(struct device *dev, struct device_attribute
 206                           *devattr, char *buf)
 207 {
 208         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 209         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 210         return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[attr->index]));
 211 }
 212
 213 static ssize_t get_alarms(struct device *dev, struct device_attribute
 214                           *devattr, char *buf)
 215 {
 216         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 217         return sprintf(buf, "%d\n", data->alarms);
 218 }
 219
 220 static ssize_t set_fan_min(struct device *dev, struct device_attribute
 221                            *devattr, const char *buf, size_t count)
 222 {
 223         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 224         struct smsc47m1_data *data = dev_get_drvdata(dev);
 225         int nr = attr->index;
 226         long rpmdiv, val = simple_strtol(buf, NULL, 10);
 227
 228         mutex_lock(&data->update_lock);
 229         rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
 230
 231         if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
 232                 mutex_unlock(&data->update_lock);
 233                 return -EINVAL;
 234         }
 235
 236         data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
 237         smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr],
 238                              data->fan_preload[nr]);
 239         mutex_unlock(&data->update_lock);
 240
 241         return count;
 242 }
 243
 244 /* Note: we save and restore the fan minimum here, because its value is
 245    determined in part by the fan clock divider.  This follows the principle
 246    of least surprise; the user doesn't expect the fan minimum to change just
 247    because the divider changed. */
 248 static ssize_t set_fan_div(struct device *dev, struct device_attribute
 249                            *devattr, const char *buf, size_t count)
 250 {
 251         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 252         struct smsc47m1_data *data = dev_get_drvdata(dev);
 253         int nr = attr->index;
 254         long new_div = simple_strtol(buf, NULL, 10), tmp;
 255         u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
 256
 257         if (new_div == old_div) /* No change */
 258                 return count;
 259
 260         mutex_lock(&data->update_lock);
 261         switch (new_div) {
 262         case 1: data->fan_div[nr] = 0; break;
 263         case 2: data->fan_div[nr] = 1; break;
 264         case 4: data->fan_div[nr] = 2; break;
 265         case 8: data->fan_div[nr] = 3; break;
 266         default:
 267                 mutex_unlock(&data->update_lock);
 268                 return -EINVAL;
 269         }
 270
 271         switch (nr) {
 272         case 0:
 273         case 1:
 274                 tmp = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV)
 275                       & ~(0x03 << (4 + 2 * nr));
 276                 tmp |= data->fan_div[nr] << (4 + 2 * nr);
 277                 smsc47m1_write_value(data, SMSC47M1_REG_FANDIV, tmp);
 278                 break;
 279         case 2:
 280                 tmp = smsc47m1_read_value(data, SMSC47M2_REG_FANDIV3) & 0xCF;
 281                 tmp |= data->fan_div[2] << 4;
 282                 smsc47m1_write_value(data, SMSC47M2_REG_FANDIV3, tmp);
 283                 break;
 284         }
 285
 286         /* Preserve fan min */
 287         tmp = 192 - (old_div * (192 - data->fan_preload[nr])
 288                      + new_div / 2) / new_div;
 289         data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
 290         smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr],
 291                              data->fan_preload[nr]);
 292         mutex_unlock(&data->update_lock);
 293
 294         return count;
 295 }
 296
 297 static ssize_t set_pwm(struct device *dev, struct device_attribute
 298                        *devattr, const char *buf, size_t count)
 299 {
 300         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 301         struct smsc47m1_data *data = dev_get_drvdata(dev);
 302         int nr = attr->index;
 303         long val = simple_strtol(buf, NULL, 10);
 304
 305         if (val < 0 || val > 255)
 306                 return -EINVAL;
 307
 308         mutex_lock(&data->update_lock);
 309         data->pwm[nr] &= 0x81; /* Preserve additional bits */
 310         data->pwm[nr] |= PWM_TO_REG(val);
 311         smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr],
 312                              data->pwm[nr]);
 313         mutex_unlock(&data->update_lock);
 314
 315         return count;
 316 }
 317
 318 static ssize_t set_pwm_en(struct device *dev, struct device_attribute
 319                           *devattr, const char *buf, size_t count)
 320 {
 321         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 322         struct smsc47m1_data *data = dev_get_drvdata(dev);
 323         int nr = attr->index;
 324         long val = simple_strtol(buf, NULL, 10);
 325
 326         if (val != 0 && val != 1)
 327                 return -EINVAL;
 328
 329         mutex_lock(&data->update_lock);
 330         data->pwm[nr] &= 0xFE; /* preserve the other bits */
 331         data->pwm[nr] |= !val;
 332         smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr],
 333                              data->pwm[nr]);
 334         mutex_unlock(&data->update_lock);
 335
 336         return count;
 337 }
 338
 339 #define fan_present(offset)                                             \
 340 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan,        \
 341                 NULL, offset - 1);                                      \
 342 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,         \
 343                 get_fan_min, set_fan_min, offset - 1);                  \
 344 static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,         \
 345                 get_fan_div, set_fan_div, offset - 1);                  \
 346 static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,               \
 347                 get_pwm, set_pwm, offset - 1);                          \
 348 static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,      \
 349                 get_pwm_en, set_pwm_en, offset - 1)
 350
 351 fan_present(1);
 352 fan_present(2);
 353 fan_present(3);
 354
 355 static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
 356
 357 static ssize_t show_name(struct device *dev, struct device_attribute
 358                          *devattr, char *buf)
 359 {
 360         struct smsc47m1_data *data = dev_get_drvdata(dev);
 361
 362         return sprintf(buf, "%s\n", data->name);
 363 }
 364 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 365
 366 /* Almost all sysfs files may or may not be created depending on the chip
 367    setup so we create them individually. It is still convenient to define a
 368    group to remove them all at once. */
 369 static struct attribute *smsc47m1_attributes[] = {
 370         &sensor_dev_attr_fan1_input.dev_attr.attr,
 371         &sensor_dev_attr_fan1_min.dev_attr.attr,
 372         &sensor_dev_attr_fan1_div.dev_attr.attr,
 373         &sensor_dev_attr_fan2_input.dev_attr.attr,
 374         &sensor_dev_attr_fan2_min.dev_attr.attr,
 375         &sensor_dev_attr_fan2_div.dev_attr.attr,
 376         &sensor_dev_attr_fan3_input.dev_attr.attr,
 377         &sensor_dev_attr_fan3_min.dev_attr.attr,
 378         &sensor_dev_attr_fan3_div.dev_attr.attr,
 379
 380         &sensor_dev_attr_pwm1.dev_attr.attr,
 381         &sensor_dev_attr_pwm1_enable.dev_attr.attr,
 382         &sensor_dev_attr_pwm2.dev_attr.attr,
 383         &sensor_dev_attr_pwm2_enable.dev_attr.attr,
 384         &sensor_dev_attr_pwm3.dev_attr.attr,
 385         &sensor_dev_attr_pwm3_enable.dev_attr.attr,
 386
 387         &dev_attr_alarms.attr,
 388         &dev_attr_name.attr,
 389         NULL
 390 };
 391
 392 static const struct attribute_group smsc47m1_group = {
 393         .attrs = smsc47m1_attributes,
 394 };
 395
 396 static int __init smsc47m1_find(unsigned short *addr,
 397                                 struct smsc47m1_sio_data *sio_data)
 398 {
 399         u8 val;
 400
 401         superio_enter();
 402         val = superio_inb(SUPERIO_REG_DEVID);
 403
 404         /*
 405          * SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
 406          * (device id 0x5F) and LPC47B27x (device id 0x51) have fan control.
 407          * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
 408          * can do much more besides (device id 0x60).
 409          * The LPC47M997 is undocumented, but seems to be compatible with
 410          * the LPC47M192, and has the same device id.
 411          * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
 412          * supports a 3rd fan, and the pin configuration registers are
 413          * unfortunately different.
 414          */
 415         switch (val) {
 416         case 0x51:
 417                 pr_info(DRVNAME ": Found SMSC LPC47B27x\n");
 418                 sio_data->type = smsc47m1;
 419                 break;
 420         case 0x59:
 421                 pr_info(DRVNAME ": Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n");
 422                 sio_data->type = smsc47m1;
 423                 break;
 424         case 0x5F:
 425                 pr_info(DRVNAME ": Found SMSC LPC47M14x\n");
 426                 sio_data->type = smsc47m1;
 427                 break;
 428         case 0x60:
 429                 pr_info(DRVNAME ": Found SMSC LPC47M15x/LPC47M192/LPC47M997\n");
 430                 sio_data->type = smsc47m1;
 431                 break;
 432         case 0x6B:
 433                 pr_info(DRVNAME ": Found SMSC LPC47M292\n");
 434                 sio_data->type = smsc47m2;
 435                 break;
 436         default:
 437                 superio_exit();
 438                 return -ENODEV;
 439         }
 440
 441         superio_select();
 442         *addr = (superio_inb(SUPERIO_REG_BASE) << 8)
 443               |  superio_inb(SUPERIO_REG_BASE + 1);
 444         val = superio_inb(SUPERIO_REG_ACT);
 445         if (*addr == 0 || (val & 0x01) == 0) {
 446                 pr_info(DRVNAME ": Device is disabled, will not use\n");
 447                 superio_exit();
 448                 return -ENODEV;
 449         }
 450
 451         superio_exit();
 452         return 0;
 453 }
 454
 455 static int __devinit smsc47m1_probe(struct platform_device *pdev)
 456 {
 457         struct device *dev = &pdev->dev;
 458         struct smsc47m1_sio_data *sio_data = dev->platform_data;
 459         struct smsc47m1_data *data;
 460         struct resource *res;
 461         int err = 0;
 462         int fan1, fan2, fan3, pwm1, pwm2, pwm3;
 463
 464         static const char *names[] = {
 465                 "smsc47m1",
 466                 "smsc47m2",
 467         };
 468
 469         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 470         if (!request_region(res->start, SMSC_EXTENT, DRVNAME)) {
 471                 dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
 472                         (unsigned long)res->start,
 473                         (unsigned long)res->end);
 474                 return -EBUSY;
 475         }
 476
 477         if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
 478                 err = -ENOMEM;
 479                 goto error_release;
 480         }
 481
 482         data->addr = res->start;
 483         data->type = sio_data->type;
 484         data->name = names[sio_data->type];
 485         mutex_init(&data->update_lock);
 486         platform_set_drvdata(pdev, data);
 487
 488         /* If no function is properly configured, there's no point in
 489            actually registering the chip. */
 490         pwm1 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(0)) & 0x05)
 491                == 0x04;
 492         pwm2 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(1)) & 0x05)
 493                == 0x04;
 494         if (data->type == smsc47m2) {
 495                 fan1 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN1)
 496                         & 0x0d) == 0x09;
 497                 fan2 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN2)
 498                         & 0x0d) == 0x09;
 499                 fan3 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN3)
 500                         & 0x0d) == 0x0d;
 501                 pwm3 = (smsc47m1_read_value(data, SMSC47M2_REG_PPIN3)
 502                         & 0x0d) == 0x08;
 503         } else {
 504                 fan1 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(0))
 505                         & 0x05) == 0x05;
 506                 fan2 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(1))
 507                         & 0x05) == 0x05;
 508                 fan3 = 0;
 509                 pwm3 = 0;
 510         }
 511         if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) {
 512                 dev_warn(dev, "Device not configured, will not use\n");
 513                 err = -ENODEV;
 514                 goto error_free;
 515         }
 516
 517         /* Some values (fan min, clock dividers, pwm registers) may be
 518            needed before any update is triggered, so we better read them
 519            at least once here. We don't usually do it that way, but in
 520            this particular case, manually reading 5 registers out of 8
 521            doesn't make much sense and we're better using the existing
 522            function. */
 523         smsc47m1_update_device(dev, 1);
 524
 525         /* Register sysfs hooks */
 526         if (fan1) {
 527                 if ((err = device_create_file(dev,
 528                                 &sensor_dev_attr_fan1_input.dev_attr))
 529                  || (err = device_create_file(dev,
 530                                 &sensor_dev_attr_fan1_min.dev_attr))
 531                  || (err = device_create_file(dev,
 532                                 &sensor_dev_attr_fan1_div.dev_attr)))
 533                         goto error_remove_files;
 534         } else
 535                 dev_dbg(dev, "Fan 1 not enabled by hardware, skipping\n");
 536
 537         if (fan2) {
 538                 if ((err = device_create_file(dev,
 539                                 &sensor_dev_attr_fan2_input.dev_attr))
 540                  || (err = device_create_file(dev,
 541                                 &sensor_dev_attr_fan2_min.dev_attr))
 542                  || (err = device_create_file(dev,
 543                                 &sensor_dev_attr_fan2_div.dev_attr)))
 544                         goto error_remove_files;
 545         } else
 546                 dev_dbg(dev, "Fan 2 not enabled by hardware, skipping\n");
 547
 548         if (fan3) {
 549                 if ((err = device_create_file(dev,
 550                                 &sensor_dev_attr_fan3_input.dev_attr))
 551                  || (err = device_create_file(dev,
 552                                 &sensor_dev_attr_fan3_min.dev_attr))
 553                  || (err = device_create_file(dev,
 554                                 &sensor_dev_attr_fan3_div.dev_attr)))
 555                         goto error_remove_files;
 556         } else if (data->type == smsc47m2)
 557                 dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n");
 558
 559         if (pwm1) {
 560                 if ((err = device_create_file(dev,
 561                                 &sensor_dev_attr_pwm1.dev_attr))
 562                  || (err = device_create_file(dev,
 563                                 &sensor_dev_attr_pwm1_enable.dev_attr)))
 564                         goto error_remove_files;
 565         } else
 566                 dev_dbg(dev, "PWM 1 not enabled by hardware, skipping\n");
 567
 568         if (pwm2) {
 569                 if ((err = device_create_file(dev,
 570                                 &sensor_dev_attr_pwm2.dev_attr))
 571                  || (err = device_create_file(dev,
 572                                 &sensor_dev_attr_pwm2_enable.dev_attr)))
 573                         goto error_remove_files;
 574         } else
 575                 dev_dbg(dev, "PWM 2 not enabled by hardware, skipping\n");
 576
 577         if (pwm3) {
 578                 if ((err = device_create_file(dev,
 579                                 &sensor_dev_attr_pwm3.dev_attr))
 580                  || (err = device_create_file(dev,
 581                                 &sensor_dev_attr_pwm3_enable.dev_attr)))
 582                         goto error_remove_files;
 583         } else if (data->type == smsc47m2)
 584                 dev_dbg(dev, "PWM 3 not enabled by hardware, skipping\n");
 585
 586         if ((err = device_create_file(dev, &dev_attr_alarms)))
 587                 goto error_remove_files;
 588         if ((err = device_create_file(dev, &dev_attr_name)))
 589                 goto error_remove_files;
 590
 591         data->hwmon_dev = hwmon_device_register(dev);
 592         if (IS_ERR(data->hwmon_dev)) {
 593                 err = PTR_ERR(data->hwmon_dev);
 594                 goto error_remove_files;
 595         }
 596
 597         return 0;
 598
 599 error_remove_files:
 600         sysfs_remove_group(&dev->kobj, &smsc47m1_group);
 601 error_free:
 602         platform_set_drvdata(pdev, NULL);
 603         kfree(data);
 604 error_release:
 605         release_region(res->start, SMSC_EXTENT);
 606         return err;
 607 }
 608
 609 static int __devexit smsc47m1_remove(struct platform_device *pdev)
 610 {
 611         struct smsc47m1_data *data = platform_get_drvdata(pdev);
 612         struct resource *res;
 613
 614         hwmon_device_unregister(data->hwmon_dev);
 615         sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group);
 616
 617         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 618         release_region(res->start, SMSC_EXTENT);
 619         platform_set_drvdata(pdev, NULL);
 620         kfree(data);
 621
 622         return 0;
 623 }
 624
 625 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 626                 int init)
 627 {
 628         struct smsc47m1_data *data = dev_get_drvdata(dev);
 629
 630         mutex_lock(&data->update_lock);
 631
 632         if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
 633                 int i, fan_nr;
 634                 fan_nr = data->type == smsc47m2 ? 3 : 2;
 635
 636                 for (i = 0; i < fan_nr; i++) {
 637                         data->fan[i] = smsc47m1_read_value(data,
 638                                        SMSC47M1_REG_FAN[i]);
 639                         data->fan_preload[i] = smsc47m1_read_value(data,
 640                                                SMSC47M1_REG_FAN_PRELOAD[i]);
 641                         data->pwm[i] = smsc47m1_read_value(data,
 642                                        SMSC47M1_REG_PWM[i]);
 643                 }
 644
 645                 i = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV);
 646                 data->fan_div[0] = (i >> 4) & 0x03;
 647                 data->fan_div[1] = i >> 6;
 648
 649                 data->alarms = smsc47m1_read_value(data,
 650                                SMSC47M1_REG_ALARM) >> 6;
 651                 /* Clear alarms if needed */
 652                 if (data->alarms)
 653                         smsc47m1_write_value(data, SMSC47M1_REG_ALARM, 0xC0);
 654
 655                 if (fan_nr >= 3) {
 656                         data->fan_div[2] = (smsc47m1_read_value(data,
 657                                             SMSC47M2_REG_FANDIV3) >> 4) & 0x03;
 658                         data->alarms |= (smsc47m1_read_value(data,
 659                                          SMSC47M2_REG_ALARM6) & 0x40) >> 4;
 660                         /* Clear alarm if needed */
 661                         if (data->alarms & 0x04)
 662                                 smsc47m1_write_value(data,
 663                                                      SMSC47M2_REG_ALARM6,
 664                                                      0x40);
 665                 }
 666
 667                 data->last_updated = jiffies;
 668         }
 669
 670         mutex_unlock(&data->update_lock);
 671         return data;
 672 }
 673
 674 static int __init smsc47m1_device_add(unsigned short address,
 675                                       const struct smsc47m1_sio_data *sio_data)
 676 {
 677         struct resource res = {
 678                 .start  = address,
 679                 .end    = address + SMSC_EXTENT - 1,
 680                 .name   = DRVNAME,
 681                 .flags  = IORESOURCE_IO,
 682         };
 683         int err;
 684
 685         pdev = platform_device_alloc(DRVNAME, address);
 686         if (!pdev) {
 687                 err = -ENOMEM;
 688                 printk(KERN_ERR DRVNAME ": Device allocation failed\n");
 689                 goto exit;
 690         }
 691
 692         err = platform_device_add_resources(pdev, &res, 1);
 693         if (err) {
 694                 printk(KERN_ERR DRVNAME ": Device resource addition failed "
 695                        "(%d)\n", err);
 696                 goto exit_device_put;
 697         }
 698
 699         err = platform_device_add_data(pdev, sio_data,
 700                                        sizeof(struct smsc47m1_sio_data));
 701         if (err) {
 702                 printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
 703                 goto exit_device_put;
 704         }
 705
 706         err = platform_device_add(pdev);
 707         if (err) {
 708                 printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
 709                        err);
 710                 goto exit_device_put;
 711         }
 712
 713         return 0;
 714
 715 exit_device_put:
 716         platform_device_put(pdev);
 717 exit:
 718         return err;
 719 }
 720
 721 static int __init sm_smsc47m1_init(void)
 722 {
 723         int err;
 724         unsigned short address;
 725         struct smsc47m1_sio_data sio_data;
 726
 727         if (smsc47m1_find(&address, &sio_data))
 728                 return -ENODEV;
 729
 730         err = platform_driver_register(&smsc47m1_driver);
 731         if (err)
 732                 goto exit;
 733
 734         /* Sets global pdev as a side effect */
 735         err = smsc47m1_device_add(address, &sio_data);
 736         if (err)
 737                 goto exit_driver;
 738
 739         return 0;
 740
 741 exit_driver:
 742         platform_driver_unregister(&smsc47m1_driver);
 743 exit:
 744         return err;
 745 }
 746
 747 static void __exit sm_smsc47m1_exit(void)
 748 {
 749         platform_device_unregister(pdev);
 750         platform_driver_unregister(&smsc47m1_driver);
 751 }
 752
 753 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
 754 MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
 755 MODULE_LICENSE("GPL");
 756
 757 module_init(sm_smsc47m1_init);
 758 module_exit(sm_smsc47m1_exit);