?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / s2io.c
blob668327ccd8d0f8c29f60b974234efaa6a51e5859
1 /************************************************************************
2 * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
3 * Copyright(c) 2002-2007 Neterion Inc.
4 *
5 * This software may be used and distributed according to the terms of
6 * the GNU General Public License (GPL), incorporated herein by reference.
7 * Drivers based on or derived from this code fall under the GPL and must
8 * retain the authorship, copyright and license notice. This file is not
9 * a complete program and may only be used when the entire operating
10 * system is licensed under the GPL.
11 * See the file COPYING in this distribution for more information.
12 *
13 * Credits:
14 * Jeff Garzik : For pointing out the improper error condition
15 * check in the s2io_xmit routine and also some
16 * issues in the Tx watch dog function. Also for
17 * patiently answering all those innumerable
18 * questions regaring the 2.6 porting issues.
19 * Stephen Hemminger : Providing proper 2.6 porting mechanism for some
20 * macros available only in 2.6 Kernel.
21 * Francois Romieu : For pointing out all code part that were
22 * deprecated and also styling related comments.
23 * Grant Grundler : For helping me get rid of some Architecture
24 * dependent code.
25 * Christopher Hellwig : Some more 2.6 specific issues in the driver.
26 *
27 * The module loadable parameters that are supported by the driver and a brief
28 * explanation of all the variables.
29 *
30 * rx_ring_num : This can be used to program the number of receive rings used
31 * in the driver.
32 * rx_ring_sz: This defines the number of receive blocks each ring can have.
33 * This is also an array of size 8.
34 * rx_ring_mode: This defines the operation mode of all 8 rings. The valid
35 * values are 1, 2.
36 * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
37 * tx_fifo_len: This too is an array of 8. Each element defines the number of
38 * Tx descriptors that can be associated with each corresponding FIFO.
39 * intr_type: This defines the type of interrupt. The values can be 0(INTA),
40 * 2(MSI_X). Default value is '2(MSI_X)'
41 * lro_enable: Specifies whether to enable Large Receive Offload (LRO) or not.
42 * Possible values '1' for enable '0' for disable. Default is '0'
43 * lro_max_pkts: This parameter defines maximum number of packets can be
44 * aggregated as a single large packet
45 * napi: This parameter used to enable/disable NAPI (polling Rx)
46 * Possible values '1' for enable and '0' for disable. Default is '1'
47 * ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO)
48 * Possible values '1' for enable and '0' for disable. Default is '0'
49 * vlan_tag_strip: This can be used to enable or disable vlan stripping.
50 * Possible values '1' for enable , '0' for disable.
51 * Default is '2' - which means disable in promisc mode
52 * and enable in non-promiscuous mode.
53 * multiq: This parameter used to enable/disable MULTIQUEUE support.
54 * Possible values '1' for enable and '0' for disable. Default is '0'
55 ************************************************************************/
56
57 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
58
59 #include <linux/module.h>
60 #include <linux/types.h>
61 #include <linux/errno.h>
62 #include <linux/ioport.h>
63 #include <linux/pci.h>
64 #include <linux/dma-mapping.h>
65 #include <linux/kernel.h>
66 #include <linux/netdevice.h>
67 #include <linux/etherdevice.h>
68 #include <linux/mdio.h>
69 #include <linux/skbuff.h>
70 #include <linux/init.h>
71 #include <linux/delay.h>
72 #include <linux/stddef.h>
73 #include <linux/ioctl.h>
74 #include <linux/timex.h>
75 #include <linux/ethtool.h>
76 #include <linux/workqueue.h>
77 #include <linux/if_vlan.h>
78 #include <linux/ip.h>
79 #include <linux/tcp.h>
80 #include <linux/uaccess.h>
81 #include <linux/io.h>
82 #include <linux/slab.h>
83 #include <net/tcp.h>
84
85 #include <asm/system.h>
86 #include <asm/div64.h>
87 #include <asm/irq.h>
88
89 /* local include */
90 #include "s2io.h"
91 #include "s2io-regs.h"
92
93 #define DRV_VERSION "2.0.26.25"
94
95 /* S2io Driver name & version. */
96 static char s2io_driver_name[] = "Neterion";
97 static char s2io_driver_version[] = DRV_VERSION;
98
99 static int rxd_size[2] = {32, 48};
100 static int rxd_count[2] = {127, 85};
101
102 static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
103 {
104 int ret;
105
106 ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
107 (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
108
109 return ret;
110 }
111
112 /*
113 * Cards with following subsystem_id have a link state indication
114 * problem, 600B, 600C, 600D, 640B, 640C and 640D.
115 * macro below identifies these cards given the subsystem_id.
116 */
117 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
118 (dev_type == XFRAME_I_DEVICE) ? \
119 ((((subid >= 0x600B) && (subid <= 0x600D)) || \
120 ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
121
122 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
123 ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
124
125 static inline int is_s2io_card_up(const struct s2io_nic *sp)
126 {
127 return test_bit(__S2IO_STATE_CARD_UP, &sp->state);
128 }
129
130 /* Ethtool related variables and Macros. */
131 static const char s2io_gstrings[][ETH_GSTRING_LEN] = {
132 "Register test\t(offline)",
133 "Eeprom test\t(offline)",
134 "Link test\t(online)",
135 "RLDRAM test\t(offline)",
136 "BIST Test\t(offline)"
137 };
138
139 static const char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = {
140 {"tmac_frms"},
141 {"tmac_data_octets"},
142 {"tmac_drop_frms"},
143 {"tmac_mcst_frms"},
144 {"tmac_bcst_frms"},
145 {"tmac_pause_ctrl_frms"},
146 {"tmac_ttl_octets"},
147 {"tmac_ucst_frms"},
148 {"tmac_nucst_frms"},
149 {"tmac_any_err_frms"},
150 {"tmac_ttl_less_fb_octets"},
151 {"tmac_vld_ip_octets"},
152 {"tmac_vld_ip"},
153 {"tmac_drop_ip"},
154 {"tmac_icmp"},
155 {"tmac_rst_tcp"},
156 {"tmac_tcp"},
157 {"tmac_udp"},
158 {"rmac_vld_frms"},
159 {"rmac_data_octets"},
160 {"rmac_fcs_err_frms"},
161 {"rmac_drop_frms"},
162 {"rmac_vld_mcst_frms"},
163 {"rmac_vld_bcst_frms"},
164 {"rmac_in_rng_len_err_frms"},
165 {"rmac_out_rng_len_err_frms"},
166 {"rmac_long_frms"},
167 {"rmac_pause_ctrl_frms"},
168 {"rmac_unsup_ctrl_frms"},
169 {"rmac_ttl_octets"},
170 {"rmac_accepted_ucst_frms"},
171 {"rmac_accepted_nucst_frms"},
172 {"rmac_discarded_frms"},
173 {"rmac_drop_events"},
174 {"rmac_ttl_less_fb_octets"},
175 {"rmac_ttl_frms"},
176 {"rmac_usized_frms"},
177 {"rmac_osized_frms"},
178 {"rmac_frag_frms"},
179 {"rmac_jabber_frms"},
180 {"rmac_ttl_64_frms"},
181 {"rmac_ttl_65_127_frms"},
182 {"rmac_ttl_128_255_frms"},
183 {"rmac_ttl_256_511_frms"},
184 {"rmac_ttl_512_1023_frms"},
185 {"rmac_ttl_1024_1518_frms"},
186 {"rmac_ip"},
187 {"rmac_ip_octets"},
188 {"rmac_hdr_err_ip"},
189 {"rmac_drop_ip"},
190 {"rmac_icmp"},
191 {"rmac_tcp"},
192 {"rmac_udp"},
193 {"rmac_err_drp_udp"},
194 {"rmac_xgmii_err_sym"},
195 {"rmac_frms_q0"},
196 {"rmac_frms_q1"},
197 {"rmac_frms_q2"},
198 {"rmac_frms_q3"},
199 {"rmac_frms_q4"},
200 {"rmac_frms_q5"},
201 {"rmac_frms_q6"},
202 {"rmac_frms_q7"},
203 {"rmac_full_q0"},
204 {"rmac_full_q1"},
205 {"rmac_full_q2"},
206 {"rmac_full_q3"},
207 {"rmac_full_q4"},
208 {"rmac_full_q5"},
209 {"rmac_full_q6"},
210 {"rmac_full_q7"},
211 {"rmac_pause_cnt"},
212 {"rmac_xgmii_data_err_cnt"},
213 {"rmac_xgmii_ctrl_err_cnt"},
214 {"rmac_accepted_ip"},
215 {"rmac_err_tcp"},
216 {"rd_req_cnt"},
217 {"new_rd_req_cnt"},
218 {"new_rd_req_rtry_cnt"},
219 {"rd_rtry_cnt"},
220 {"wr_rtry_rd_ack_cnt"},
221 {"wr_req_cnt"},
222 {"new_wr_req_cnt"},
223 {"new_wr_req_rtry_cnt"},
224 {"wr_rtry_cnt"},
225 {"wr_disc_cnt"},
226 {"rd_rtry_wr_ack_cnt"},
227 {"txp_wr_cnt"},
228 {"txd_rd_cnt"},
229 {"txd_wr_cnt"},
230 {"rxd_rd_cnt"},
231 {"rxd_wr_cnt"},
232 {"txf_rd_cnt"},
233 {"rxf_wr_cnt"}
234 };
235
236 static const char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = {
237 {"rmac_ttl_1519_4095_frms"},
238 {"rmac_ttl_4096_8191_frms"},
239 {"rmac_ttl_8192_max_frms"},
240 {"rmac_ttl_gt_max_frms"},
241 {"rmac_osized_alt_frms"},
242 {"rmac_jabber_alt_frms"},
243 {"rmac_gt_max_alt_frms"},
244 {"rmac_vlan_frms"},
245 {"rmac_len_discard"},
246 {"rmac_fcs_discard"},
247 {"rmac_pf_discard"},
248 {"rmac_da_discard"},
249 {"rmac_red_discard"},
250 {"rmac_rts_discard"},
251 {"rmac_ingm_full_discard"},
252 {"link_fault_cnt"}
253 };
254
255 static const char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
256 {"\n DRIVER STATISTICS"},
257 {"single_bit_ecc_errs"},
258 {"double_bit_ecc_errs"},
259 {"parity_err_cnt"},
260 {"serious_err_cnt"},
261 {"soft_reset_cnt"},
262 {"fifo_full_cnt"},
263 {"ring_0_full_cnt"},
264 {"ring_1_full_cnt"},
265 {"ring_2_full_cnt"},
266 {"ring_3_full_cnt"},
267 {"ring_4_full_cnt"},
268 {"ring_5_full_cnt"},
269 {"ring_6_full_cnt"},
270 {"ring_7_full_cnt"},
271 {"alarm_transceiver_temp_high"},
272 {"alarm_transceiver_temp_low"},
273 {"alarm_laser_bias_current_high"},
274 {"alarm_laser_bias_current_low"},
275 {"alarm_laser_output_power_high"},
276 {"alarm_laser_output_power_low"},
277 {"warn_transceiver_temp_high"},
278 {"warn_transceiver_temp_low"},
279 {"warn_laser_bias_current_high"},
280 {"warn_laser_bias_current_low"},
281 {"warn_laser_output_power_high"},
282 {"warn_laser_output_power_low"},
283 {"lro_aggregated_pkts"},
284 {"lro_flush_both_count"},
285 {"lro_out_of_sequence_pkts"},
286 {"lro_flush_due_to_max_pkts"},
287 {"lro_avg_aggr_pkts"},
288 {"mem_alloc_fail_cnt"},
289 {"pci_map_fail_cnt"},
290 {"watchdog_timer_cnt"},
291 {"mem_allocated"},
292 {"mem_freed"},
293 {"link_up_cnt"},
294 {"link_down_cnt"},
295 {"link_up_time"},
296 {"link_down_time"},
297 {"tx_tcode_buf_abort_cnt"},
298 {"tx_tcode_desc_abort_cnt"},
299 {"tx_tcode_parity_err_cnt"},
300 {"tx_tcode_link_loss_cnt"},
301 {"tx_tcode_list_proc_err_cnt"},
302 {"rx_tcode_parity_err_cnt"},
303 {"rx_tcode_abort_cnt"},
304 {"rx_tcode_parity_abort_cnt"},
305 {"rx_tcode_rda_fail_cnt"},
306 {"rx_tcode_unkn_prot_cnt"},
307 {"rx_tcode_fcs_err_cnt"},
308 {"rx_tcode_buf_size_err_cnt"},
309 {"rx_tcode_rxd_corrupt_cnt"},
310 {"rx_tcode_unkn_err_cnt"},
311 {"tda_err_cnt"},
312 {"pfc_err_cnt"},
313 {"pcc_err_cnt"},
314 {"tti_err_cnt"},
315 {"tpa_err_cnt"},
316 {"sm_err_cnt"},
317 {"lso_err_cnt"},
318 {"mac_tmac_err_cnt"},
319 {"mac_rmac_err_cnt"},
320 {"xgxs_txgxs_err_cnt"},
321 {"xgxs_rxgxs_err_cnt"},
322 {"rc_err_cnt"},
323 {"prc_pcix_err_cnt"},
324 {"rpa_err_cnt"},
325 {"rda_err_cnt"},
326 {"rti_err_cnt"},
327 {"mc_err_cnt"}
328 };
329
330 #define S2IO_XENA_STAT_LEN ARRAY_SIZE(ethtool_xena_stats_keys)
331 #define S2IO_ENHANCED_STAT_LEN ARRAY_SIZE(ethtool_enhanced_stats_keys)
332 #define S2IO_DRIVER_STAT_LEN ARRAY_SIZE(ethtool_driver_stats_keys)
333
334 #define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN)
335 #define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN)
336
337 #define XFRAME_I_STAT_STRINGS_LEN (XFRAME_I_STAT_LEN * ETH_GSTRING_LEN)
338 #define XFRAME_II_STAT_STRINGS_LEN (XFRAME_II_STAT_LEN * ETH_GSTRING_LEN)
339
340 #define S2IO_TEST_LEN ARRAY_SIZE(s2io_gstrings)
341 #define S2IO_STRINGS_LEN (S2IO_TEST_LEN * ETH_GSTRING_LEN)
342
343 #define S2IO_TIMER_CONF(timer, handle, arg, exp) \
344 init_timer(&timer); \
345 timer.function = handle; \
346 timer.data = (unsigned long)arg; \
347 mod_timer(&timer, (jiffies + exp)) \
348
349 /* copy mac addr to def_mac_addr array */
350 static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr)
351 {
352 sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr);
353 sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8);
354 sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16);
355 sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24);
356 sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32);
357 sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40);
358 }
359
360 /* Add the vlan */
361 static void s2io_vlan_rx_register(struct net_device *dev,
362 struct vlan_group *grp)
363 {
364 int i;
365 struct s2io_nic *nic = netdev_priv(dev);
366 unsigned long flags[MAX_TX_FIFOS];
367 struct config_param *config = &nic->config;
368 struct mac_info *mac_control = &nic->mac_control;
369
370 for (i = 0; i < config->tx_fifo_num; i++) {
371 struct fifo_info *fifo = &mac_control->fifos[i];
372
373 spin_lock_irqsave(&fifo->tx_lock, flags[i]);
374 }
375
376 nic->vlgrp = grp;
377
378 for (i = config->tx_fifo_num - 1; i >= 0; i--) {
379 struct fifo_info *fifo = &mac_control->fifos[i];
380
381 spin_unlock_irqrestore(&fifo->tx_lock, flags[i]);
382 }
383 }
384
385 /* Unregister the vlan */
386 static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
387 {
388 int i;
389 struct s2io_nic *nic = netdev_priv(dev);
390 unsigned long flags[MAX_TX_FIFOS];
391 struct config_param *config = &nic->config;
392 struct mac_info *mac_control = &nic->mac_control;
393
394 for (i = 0; i < config->tx_fifo_num; i++) {
395 struct fifo_info *fifo = &mac_control->fifos[i];
396
397 spin_lock_irqsave(&fifo->tx_lock, flags[i]);
398 }
399
400 if (nic->vlgrp)
401 vlan_group_set_device(nic->vlgrp, vid, NULL);
402
403 for (i = config->tx_fifo_num - 1; i >= 0; i--) {
404 struct fifo_info *fifo = &mac_control->fifos[i];
405
406 spin_unlock_irqrestore(&fifo->tx_lock, flags[i]);
407 }
408 }
409
410 /*
411 * Constants to be programmed into the Xena's registers, to configure
412 * the XAUI.
413 */
414
415 #define END_SIGN 0x0
416 static const u64 herc_act_dtx_cfg[] = {
417 /* Set address */
418 0x8000051536750000ULL, 0x80000515367500E0ULL,
419 /* Write data */
420 0x8000051536750004ULL, 0x80000515367500E4ULL,
421 /* Set address */
422 0x80010515003F0000ULL, 0x80010515003F00E0ULL,
423 /* Write data */
424 0x80010515003F0004ULL, 0x80010515003F00E4ULL,
425 /* Set address */
426 0x801205150D440000ULL, 0x801205150D4400E0ULL,
427 /* Write data */
428 0x801205150D440004ULL, 0x801205150D4400E4ULL,
429 /* Set address */
430 0x80020515F2100000ULL, 0x80020515F21000E0ULL,
431 /* Write data */
432 0x80020515F2100004ULL, 0x80020515F21000E4ULL,
433 /* Done */
434 END_SIGN
435 };
436
437 static const u64 xena_dtx_cfg[] = {
438 /* Set address */
439 0x8000051500000000ULL, 0x80000515000000E0ULL,
440 /* Write data */
441 0x80000515D9350004ULL, 0x80000515D93500E4ULL,
442 /* Set address */
443 0x8001051500000000ULL, 0x80010515000000E0ULL,
444 /* Write data */
445 0x80010515001E0004ULL, 0x80010515001E00E4ULL,
446 /* Set address */
447 0x8002051500000000ULL, 0x80020515000000E0ULL,
448 /* Write data */
449 0x80020515F2100004ULL, 0x80020515F21000E4ULL,
450 END_SIGN
451 };
452
453 /*
454 * Constants for Fixing the MacAddress problem seen mostly on
455 * Alpha machines.
456 */
457 static const u64 fix_mac[] = {
458 0x0060000000000000ULL, 0x0060600000000000ULL,
459 0x0040600000000000ULL, 0x0000600000000000ULL,
460 0x0020600000000000ULL, 0x0060600000000000ULL,
461 0x0020600000000000ULL, 0x0060600000000000ULL,
462 0x0020600000000000ULL, 0x0060600000000000ULL,
463 0x0020600000000000ULL, 0x0060600000000000ULL,
464 0x0020600000000000ULL, 0x0060600000000000ULL,
465 0x0020600000000000ULL, 0x0060600000000000ULL,
466 0x0020600000000000ULL, 0x0060600000000000ULL,
467 0x0020600000000000ULL, 0x0060600000000000ULL,
468 0x0020600000000000ULL, 0x0060600000000000ULL,
469 0x0020600000000000ULL, 0x0060600000000000ULL,
470 0x0020600000000000ULL, 0x0000600000000000ULL,
471 0x0040600000000000ULL, 0x0060600000000000ULL,
472 END_SIGN
473 };
474
475 MODULE_LICENSE("GPL");
476 MODULE_VERSION(DRV_VERSION);
477
478
479 /* Module Loadable parameters. */
480 S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM);
481 S2IO_PARM_INT(rx_ring_num, 1);
482 S2IO_PARM_INT(multiq, 0);
483 S2IO_PARM_INT(rx_ring_mode, 1);
484 S2IO_PARM_INT(use_continuous_tx_intrs, 1);
485 S2IO_PARM_INT(rmac_pause_time, 0x100);
486 S2IO_PARM_INT(mc_pause_threshold_q0q3, 187);
487 S2IO_PARM_INT(mc_pause_threshold_q4q7, 187);
488 S2IO_PARM_INT(shared_splits, 0);
489 S2IO_PARM_INT(tmac_util_period, 5);
490 S2IO_PARM_INT(rmac_util_period, 5);
491 S2IO_PARM_INT(l3l4hdr_size, 128);
492 /* 0 is no steering, 1 is Priority steering, 2 is Default steering */
493 S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING);
494 /* Frequency of Rx desc syncs expressed as power of 2 */
495 S2IO_PARM_INT(rxsync_frequency, 3);
496 /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
497 S2IO_PARM_INT(intr_type, 2);
498 /* Large receive offload feature */
499 static unsigned int lro_enable;
500 module_param_named(lro, lro_enable, uint, 0);
501
502 /* Max pkts to be aggregated by LRO at one time. If not specified,
503 * aggregation happens until we hit max IP pkt size(64K)
504 */
505 S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
506 S2IO_PARM_INT(indicate_max_pkts, 0);
507
508 S2IO_PARM_INT(napi, 1);
509 S2IO_PARM_INT(ufo, 0);
510 S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
511
512 static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
513 {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
514 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
515 {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
516 static unsigned int rts_frm_len[MAX_RX_RINGS] =
517 {[0 ...(MAX_RX_RINGS - 1)] = 0 };
518
519 module_param_array(tx_fifo_len, uint, NULL, 0);
520 module_param_array(rx_ring_sz, uint, NULL, 0);
521 module_param_array(rts_frm_len, uint, NULL, 0);
522
523 /*
524 * S2IO device table.
525 * This table lists all the devices that this driver supports.
526 */
527 static DEFINE_PCI_DEVICE_TABLE(s2io_tbl) = {
528 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
529 PCI_ANY_ID, PCI_ANY_ID},
530 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
531 PCI_ANY_ID, PCI_ANY_ID},
532 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
533 PCI_ANY_ID, PCI_ANY_ID},
534 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
535 PCI_ANY_ID, PCI_ANY_ID},
536 {0,}
537 };
538
539 MODULE_DEVICE_TABLE(pci, s2io_tbl);
540
541 static struct pci_error_handlers s2io_err_handler = {
542 .error_detected = s2io_io_error_detected,
543 .slot_reset = s2io_io_slot_reset,
544 .resume = s2io_io_resume,
545 };
546
547 static struct pci_driver s2io_driver = {
548 .name = "S2IO",
549 .id_table = s2io_tbl,
550 .probe = s2io_init_nic,
551 .remove = __devexit_p(s2io_rem_nic),
552 .err_handler = &s2io_err_handler,
553 };
554
555 /* A simplifier macro used both by init and free shared_mem Fns(). */
556 #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
557
558 /* netqueue manipulation helper functions */
559 static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
560 {
561 if (!sp->config.multiq) {
562 int i;
563
564 for (i = 0; i < sp->config.tx_fifo_num; i++)
565 sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
566 }
567 netif_tx_stop_all_queues(sp->dev);
568 }
569
570 static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
571 {
572 if (!sp->config.multiq)
573 sp->mac_control.fifos[fifo_no].queue_state =
574 FIFO_QUEUE_STOP;
575
576 netif_tx_stop_all_queues(sp->dev);
577 }
578
579 static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
580 {
581 if (!sp->config.multiq) {
582 int i;
583
584 for (i = 0; i < sp->config.tx_fifo_num; i++)
585 sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
586 }
587 netif_tx_start_all_queues(sp->dev);
588 }
589
590 static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
591 {
592 if (!sp->config.multiq)
593 sp->mac_control.fifos[fifo_no].queue_state =
594 FIFO_QUEUE_START;
595
596 netif_tx_start_all_queues(sp->dev);
597 }
598
599 static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
600 {
601 if (!sp->config.multiq) {
602 int i;
603
604 for (i = 0; i < sp->config.tx_fifo_num; i++)
605 sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
606 }
607 netif_tx_wake_all_queues(sp->dev);
608 }
609
610 static inline void s2io_wake_tx_queue(
611 struct fifo_info *fifo, int cnt, u8 multiq)
612 {
613
614 if (multiq) {
615 if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
616 netif_wake_subqueue(fifo->dev, fifo->fifo_no);
617 } else if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
618 if (netif_queue_stopped(fifo->dev)) {
619 fifo->queue_state = FIFO_QUEUE_START;
620 netif_wake_queue(fifo->dev);
621 }
622 }
623 }
624
625 /**
626 * init_shared_mem - Allocation and Initialization of Memory
627 * @nic: Device private variable.
628 * Description: The function allocates all the memory areas shared
629 * between the NIC and the driver. This includes Tx descriptors,
630 * Rx descriptors and the statistics block.
631 */
632
633 static int init_shared_mem(struct s2io_nic *nic)
634 {
635 u32 size;
636 void *tmp_v_addr, *tmp_v_addr_next;
637 dma_addr_t tmp_p_addr, tmp_p_addr_next;
638 struct RxD_block *pre_rxd_blk = NULL;
639 int i, j, blk_cnt;
640 int lst_size, lst_per_page;
641 struct net_device *dev = nic->dev;
642 unsigned long tmp;
643 struct buffAdd *ba;
644 struct config_param *config = &nic->config;
645 struct mac_info *mac_control = &nic->mac_control;
646 unsigned long long mem_allocated = 0;
647
648 /* Allocation and initialization of TXDLs in FIFOs */
649 size = 0;
650 for (i = 0; i < config->tx_fifo_num; i++) {
651 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
652
653 size += tx_cfg->fifo_len;
654 }
655 if (size > MAX_AVAILABLE_TXDS) {
656 DBG_PRINT(ERR_DBG,
657 "Too many TxDs requested: %d, max supported: %d\n",
658 size, MAX_AVAILABLE_TXDS);
659 return -EINVAL;
660 }
661
662 size = 0;
663 for (i = 0; i < config->tx_fifo_num; i++) {
664 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
665
666 size = tx_cfg->fifo_len;
667 /*
668 * Legal values are from 2 to 8192
669 */
670 if (size < 2) {
671 DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "
672 "Valid lengths are 2 through 8192\n",
673 i, size);
674 return -EINVAL;
675 }
676 }
677
678 lst_size = (sizeof(struct TxD) * config->max_txds);
679 lst_per_page = PAGE_SIZE / lst_size;
680
681 for (i = 0; i < config->tx_fifo_num; i++) {
682 struct fifo_info *fifo = &mac_control->fifos[i];
683 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
684 int fifo_len = tx_cfg->fifo_len;
685 int list_holder_size = fifo_len * sizeof(struct list_info_hold);
686
687 fifo->list_info = kzalloc(list_holder_size, GFP_KERNEL);
688 if (!fifo->list_info) {
689 DBG_PRINT(INFO_DBG, "Malloc failed for list_info\n");
690 return -ENOMEM;
691 }
692 mem_allocated += list_holder_size;
693 }
694 for (i = 0; i < config->tx_fifo_num; i++) {
695 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
696 lst_per_page);
697 struct fifo_info *fifo = &mac_control->fifos[i];
698 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
699
700 fifo->tx_curr_put_info.offset = 0;
701 fifo->tx_curr_put_info.fifo_len = tx_cfg->fifo_len - 1;
702 fifo->tx_curr_get_info.offset = 0;
703 fifo->tx_curr_get_info.fifo_len = tx_cfg->fifo_len - 1;
704 fifo->fifo_no = i;
705 fifo->nic = nic;
706 fifo->max_txds = MAX_SKB_FRAGS + 2;
707 fifo->dev = dev;
708
709 for (j = 0; j < page_num; j++) {
710 int k = 0;
711 dma_addr_t tmp_p;
712 void *tmp_v;
713 tmp_v = pci_alloc_consistent(nic->pdev,
714 PAGE_SIZE, &tmp_p);
715 if (!tmp_v) {
716 DBG_PRINT(INFO_DBG,
717 "pci_alloc_consistent failed for TxDL\n");
718 return -ENOMEM;
719 }
720 /* If we got a zero DMA address(can happen on
721 * certain platforms like PPC), reallocate.
722 * Store virtual address of page we don't want,
723 * to be freed later.
724 */
725 if (!tmp_p) {
726 mac_control->zerodma_virt_addr = tmp_v;
727 DBG_PRINT(INIT_DBG,
728 "%s: Zero DMA address for TxDL. "
729 "Virtual address %p\n",
730 dev->name, tmp_v);
731 tmp_v = pci_alloc_consistent(nic->pdev,
732 PAGE_SIZE, &tmp_p);
733 if (!tmp_v) {
734 DBG_PRINT(INFO_DBG,
735 "pci_alloc_consistent failed for TxDL\n");
736 return -ENOMEM;
737 }
738 mem_allocated += PAGE_SIZE;
739 }
740 while (k < lst_per_page) {
741 int l = (j * lst_per_page) + k;
742 if (l == tx_cfg->fifo_len)
743 break;
744 fifo->list_info[l].list_virt_addr =
745 tmp_v + (k * lst_size);
746 fifo->list_info[l].list_phy_addr =
747 tmp_p + (k * lst_size);
748 k++;
749 }
750 }
751 }
752
753 for (i = 0; i < config->tx_fifo_num; i++) {
754 struct fifo_info *fifo = &mac_control->fifos[i];
755 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
756
757 size = tx_cfg->fifo_len;
758 fifo->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL);
759 if (!fifo->ufo_in_band_v)
760 return -ENOMEM;
761 mem_allocated += (size * sizeof(u64));
762 }
763
764 /* Allocation and initialization of RXDs in Rings */
765 size = 0;
766 for (i = 0; i < config->rx_ring_num; i++) {
767 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
768 struct ring_info *ring = &mac_control->rings[i];
769
770 if (rx_cfg->num_rxd % (rxd_count[nic->rxd_mode] + 1)) {
771 DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "
772 "multiple of RxDs per Block\n",
773 dev->name, i);
774 return FAILURE;
775 }
776 size += rx_cfg->num_rxd;
777 ring->block_count = rx_cfg->num_rxd /
778 (rxd_count[nic->rxd_mode] + 1);
779 ring->pkt_cnt = rx_cfg->num_rxd - ring->block_count;
780 }
781 if (nic->rxd_mode == RXD_MODE_1)
782 size = (size * (sizeof(struct RxD1)));
783 else
784 size = (size * (sizeof(struct RxD3)));
785
786 for (i = 0; i < config->rx_ring_num; i++) {
787 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
788 struct ring_info *ring = &mac_control->rings[i];
789
790 ring->rx_curr_get_info.block_index = 0;
791 ring->rx_curr_get_info.offset = 0;
792 ring->rx_curr_get_info.ring_len = rx_cfg->num_rxd - 1;
793 ring->rx_curr_put_info.block_index = 0;
794 ring->rx_curr_put_info.offset = 0;
795 ring->rx_curr_put_info.ring_len = rx_cfg->num_rxd - 1;
796 ring->nic = nic;
797 ring->ring_no = i;
798 ring->lro = lro_enable;
799
800 blk_cnt = rx_cfg->num_rxd / (rxd_count[nic->rxd_mode] + 1);
801 /* Allocating all the Rx blocks */
802 for (j = 0; j < blk_cnt; j++) {
803 struct rx_block_info *rx_blocks;
804 int l;
805
806 rx_blocks = &ring->rx_blocks[j];
807 size = SIZE_OF_BLOCK; /* size is always page size */
808 tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
809 &tmp_p_addr);
810 if (tmp_v_addr == NULL) {
811 /*
812 * In case of failure, free_shared_mem()
813 * is called, which should free any
814 * memory that was alloced till the
815 * failure happened.
816 */
817 rx_blocks->block_virt_addr = tmp_v_addr;
818 return -ENOMEM;
819 }
820 mem_allocated += size;
821 memset(tmp_v_addr, 0, size);
822
823 size = sizeof(struct rxd_info) *
824 rxd_count[nic->rxd_mode];
825 rx_blocks->block_virt_addr = tmp_v_addr;
826 rx_blocks->block_dma_addr = tmp_p_addr;
827 rx_blocks->rxds = kmalloc(size, GFP_KERNEL);
828 if (!rx_blocks->rxds)
829 return -ENOMEM;
830 mem_allocated += size;
831 for (l = 0; l < rxd_count[nic->rxd_mode]; l++) {
832 rx_blocks->rxds[l].virt_addr =
833 rx_blocks->block_virt_addr +
834 (rxd_size[nic->rxd_mode] * l);
835 rx_blocks->rxds[l].dma_addr =
836 rx_blocks->block_dma_addr +
837 (rxd_size[nic->rxd_mode] * l);
838 }
839 }
840 /* Interlinking all Rx Blocks */
841 for (j = 0; j < blk_cnt; j++) {
842 int next = (j + 1) % blk_cnt;
843 tmp_v_addr = ring->rx_blocks[j].block_virt_addr;
844 tmp_v_addr_next = ring->rx_blocks[next].block_virt_addr;
845 tmp_p_addr = ring->rx_blocks[j].block_dma_addr;
846 tmp_p_addr_next = ring->rx_blocks[next].block_dma_addr;
847
848 pre_rxd_blk = (struct RxD_block *)tmp_v_addr;
849 pre_rxd_blk->reserved_2_pNext_RxD_block =
850 (unsigned long)tmp_v_addr_next;
851 pre_rxd_blk->pNext_RxD_Blk_physical =
852 (u64)tmp_p_addr_next;
853 }
854 }
855 if (nic->rxd_mode == RXD_MODE_3B) {
856 /*
857 * Allocation of Storages for buffer addresses in 2BUFF mode
858 * and the buffers as well.
859 */
860 for (i = 0; i < config->rx_ring_num; i++) {
861 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
862 struct ring_info *ring = &mac_control->rings[i];
863
864 blk_cnt = rx_cfg->num_rxd /
865 (rxd_count[nic->rxd_mode] + 1);
866 size = sizeof(struct buffAdd *) * blk_cnt;
867 ring->ba = kmalloc(size, GFP_KERNEL);
868 if (!ring->ba)
869 return -ENOMEM;
870 mem_allocated += size;
871 for (j = 0; j < blk_cnt; j++) {
872 int k = 0;
873
874 size = sizeof(struct buffAdd) *
875 (rxd_count[nic->rxd_mode] + 1);
876 ring->ba[j] = kmalloc(size, GFP_KERNEL);
877 if (!ring->ba[j])
878 return -ENOMEM;
879 mem_allocated += size;
880 while (k != rxd_count[nic->rxd_mode]) {
881 ba = &ring->ba[j][k];
882 size = BUF0_LEN + ALIGN_SIZE;
883 ba->ba_0_org = kmalloc(size, GFP_KERNEL);
884 if (!ba->ba_0_org)
885 return -ENOMEM;
886 mem_allocated += size;
887 tmp = (unsigned long)ba->ba_0_org;
888 tmp += ALIGN_SIZE;
889 tmp &= ~((unsigned long)ALIGN_SIZE);
890 ba->ba_0 = (void *)tmp;
891
892 size = BUF1_LEN + ALIGN_SIZE;
893 ba->ba_1_org = kmalloc(size, GFP_KERNEL);
894 if (!ba->ba_1_org)
895 return -ENOMEM;
896 mem_allocated += size;
897 tmp = (unsigned long)ba->ba_1_org;
898 tmp += ALIGN_SIZE;
899 tmp &= ~((unsigned long)ALIGN_SIZE);
900 ba->ba_1 = (void *)tmp;
901 k++;
902 }
903 }
904 }
905 }
906
907 /* Allocation and initialization of Statistics block */
908 size = sizeof(struct stat_block);
909 mac_control->stats_mem =
910 pci_alloc_consistent(nic->pdev, size,
911 &mac_control->stats_mem_phy);
912
913 if (!mac_control->stats_mem) {
914 /*
915 * In case of failure, free_shared_mem() is called, which
916 * should free any memory that was alloced till the
917 * failure happened.
918 */
919 return -ENOMEM;
920 }
921 mem_allocated += size;
922 mac_control->stats_mem_sz = size;
923
924 tmp_v_addr = mac_control->stats_mem;
925 mac_control->stats_info = (struct stat_block *)tmp_v_addr;
926 memset(tmp_v_addr, 0, size);
927 DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n",
928 dev_name(&nic->pdev->dev), (unsigned long long)tmp_p_addr);
929 mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
930 return SUCCESS;
931 }
932
933 /**
934 * free_shared_mem - Free the allocated Memory
935 * @nic: Device private variable.
936 * Description: This function is to free all memory locations allocated by
937 * the init_shared_mem() function and return it to the kernel.
938 */
939
940 static void free_shared_mem(struct s2io_nic *nic)
941 {
942 int i, j, blk_cnt, size;
943 void *tmp_v_addr;
944 dma_addr_t tmp_p_addr;
945 int lst_size, lst_per_page;
946 struct net_device *dev;
947 int page_num = 0;
948 struct config_param *config;
949 struct mac_info *mac_control;
950 struct stat_block *stats;
951 struct swStat *swstats;
952
953 if (!nic)
954 return;
955
956 dev = nic->dev;
957
958 config = &nic->config;
959 mac_control = &nic->mac_control;
960 stats = mac_control->stats_info;
961 swstats = &stats->sw_stat;
962
963 lst_size = sizeof(struct TxD) * config->max_txds;
964 lst_per_page = PAGE_SIZE / lst_size;
965
966 for (i = 0; i < config->tx_fifo_num; i++) {
967 struct fifo_info *fifo = &mac_control->fifos[i];
968 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
969
970 page_num = TXD_MEM_PAGE_CNT(tx_cfg->fifo_len, lst_per_page);
971 for (j = 0; j < page_num; j++) {
972 int mem_blks = (j * lst_per_page);
973 struct list_info_hold *fli;
974
975 if (!fifo->list_info)
976 return;
977
978 fli = &fifo->list_info[mem_blks];
979 if (!fli->list_virt_addr)
980 break;
981 pci_free_consistent(nic->pdev, PAGE_SIZE,
982 fli->list_virt_addr,
983 fli->list_phy_addr);
984 swstats->mem_freed += PAGE_SIZE;
985 }
986 /* If we got a zero DMA address during allocation,
987 * free the page now
988 */
989 if (mac_control->zerodma_virt_addr) {
990 pci_free_consistent(nic->pdev, PAGE_SIZE,
991 mac_control->zerodma_virt_addr,
992 (dma_addr_t)0);
993 DBG_PRINT(INIT_DBG,
994 "%s: Freeing TxDL with zero DMA address. "
995 "Virtual address %p\n",
996 dev->name, mac_control->zerodma_virt_addr);
997 swstats->mem_freed += PAGE_SIZE;
998 }
999 kfree(fifo->list_info);
1000 swstats->mem_freed += tx_cfg->fifo_len *
1001 sizeof(struct list_info_hold);
1002 }
1003
1004 size = SIZE_OF_BLOCK;
1005 for (i = 0; i < config->rx_ring_num; i++) {
1006 struct ring_info *ring = &mac_control->rings[i];
1007
1008 blk_cnt = ring->block_count;
1009 for (j = 0; j < blk_cnt; j++) {
1010 tmp_v_addr = ring->rx_blocks[j].block_virt_addr;
1011 tmp_p_addr = ring->rx_blocks[j].block_dma_addr;
1012 if (tmp_v_addr == NULL)
1013 break;
1014 pci_free_consistent(nic->pdev, size,
1015 tmp_v_addr, tmp_p_addr);
1016 swstats->mem_freed += size;
1017 kfree(ring->rx_blocks[j].rxds);
1018 swstats->mem_freed += sizeof(struct rxd_info) *
1019 rxd_count[nic->rxd_mode];
1020 }
1021 }
1022
1023 if (nic->rxd_mode == RXD_MODE_3B) {
1024 /* Freeing buffer storage addresses in 2BUFF mode. */
1025 for (i = 0; i < config->rx_ring_num; i++) {
1026 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
1027 struct ring_info *ring = &mac_control->rings[i];
1028
1029 blk_cnt = rx_cfg->num_rxd /
1030 (rxd_count[nic->rxd_mode] + 1);
1031 for (j = 0; j < blk_cnt; j++) {
1032 int k = 0;
1033 if (!ring->ba[j])
1034 continue;
1035 while (k != rxd_count[nic->rxd_mode]) {
1036 struct buffAdd *ba = &ring->ba[j][k];
1037 kfree(ba->ba_0_org);
1038 swstats->mem_freed +=
1039 BUF0_LEN + ALIGN_SIZE;
1040 kfree(ba->ba_1_org);
1041 swstats->mem_freed +=
1042 BUF1_LEN + ALIGN_SIZE;
1043 k++;
1044 }
1045 kfree(ring->ba[j]);
1046 swstats->mem_freed += sizeof(struct buffAdd) *
1047 (rxd_count[nic->rxd_mode] + 1);
1048 }
1049 kfree(ring->ba);
1050 swstats->mem_freed += sizeof(struct buffAdd *) *
1051 blk_cnt;
1052 }
1053 }
1054
1055 for (i = 0; i < nic->config.tx_fifo_num; i++) {
1056 struct fifo_info *fifo = &mac_control->fifos[i];
1057 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
1058
1059 if (fifo->ufo_in_band_v) {
1060 swstats->mem_freed += tx_cfg->fifo_len *
1061 sizeof(u64);
1062 kfree(fifo->ufo_in_band_v);
1063 }
1064 }
1065
1066 if (mac_control->stats_mem) {
1067 swstats->mem_freed += mac_control->stats_mem_sz;
1068 pci_free_consistent(nic->pdev,
1069 mac_control->stats_mem_sz,
1070 mac_control->stats_mem,
1071 mac_control->stats_mem_phy);
1072 }
1073 }
1074
1075 /**
1076 * s2io_verify_pci_mode -
1077 */
1078
1079 static int s2io_verify_pci_mode(struct s2io_nic *nic)
1080 {
1081 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1082 register u64 val64 = 0;
1083 int mode;
1084
1085 val64 = readq(&bar0->pci_mode);
1086 mode = (u8)GET_PCI_MODE(val64);
1087
1088 if (val64 & PCI_MODE_UNKNOWN_MODE)
1089 return -1; /* Unknown PCI mode */
1090 return mode;
1091 }
1092
1093 #define NEC_VENID 0x1033
1094 #define NEC_DEVID 0x0125
1095 static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev)
1096 {
1097 struct pci_dev *tdev = NULL;
1098 while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
1099 if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
1100 if (tdev->bus == s2io_pdev->bus->parent) {
1101 pci_dev_put(tdev);
1102 return 1;
1103 }
1104 }
1105 }
1106 return 0;
1107 }
1108
1109 static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266};
1110 /**
1111 * s2io_print_pci_mode -
1112 */
1113 static int s2io_print_pci_mode(struct s2io_nic *nic)
1114 {
1115 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1116 register u64 val64 = 0;
1117 int mode;
1118 struct config_param *config = &nic->config;
1119 const char *pcimode;
1120
1121 val64 = readq(&bar0->pci_mode);
1122 mode = (u8)GET_PCI_MODE(val64);
1123
1124 if (val64 & PCI_MODE_UNKNOWN_MODE)
1125 return -1; /* Unknown PCI mode */
1126
1127 config->bus_speed = bus_speed[mode];
1128
1129 if (s2io_on_nec_bridge(nic->pdev)) {
1130 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
1131 nic->dev->name);
1132 return mode;
1133 }
1134
1135 switch (mode) {
1136 case PCI_MODE_PCI_33:
1137 pcimode = "33MHz PCI bus";
1138 break;
1139 case PCI_MODE_PCI_66:
1140 pcimode = "66MHz PCI bus";
1141 break;
1142 case PCI_MODE_PCIX_M1_66:
1143 pcimode = "66MHz PCIX(M1) bus";
1144 break;
1145 case PCI_MODE_PCIX_M1_100:
1146 pcimode = "100MHz PCIX(M1) bus";
1147 break;
1148 case PCI_MODE_PCIX_M1_133:
1149 pcimode = "133MHz PCIX(M1) bus";
1150 break;
1151 case PCI_MODE_PCIX_M2_66:
1152 pcimode = "133MHz PCIX(M2) bus";
1153 break;
1154 case PCI_MODE_PCIX_M2_100:
1155 pcimode = "200MHz PCIX(M2) bus";
1156 break;
1157 case PCI_MODE_PCIX_M2_133:
1158 pcimode = "266MHz PCIX(M2) bus";
1159 break;
1160 default:
1161 pcimode = "unsupported bus!";
1162 mode = -1;
1163 }
1164
1165 DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",
1166 nic->dev->name, val64 & PCI_MODE_32_BITS ? 32 : 64, pcimode);
1167
1168 return mode;
1169 }
1170
1171 /**
1172 * init_tti - Initialization transmit traffic interrupt scheme
1173 * @nic: device private variable
1174 * @link: link status (UP/DOWN) used to enable/disable continuous
1175 * transmit interrupts
1176 * Description: The function configures transmit traffic interrupts
1177 * Return Value: SUCCESS on success and
1178 * '-1' on failure
1179 */
1180
1181 static int init_tti(struct s2io_nic *nic, int link)
1182 {
1183 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1184 register u64 val64 = 0;
1185 int i;
1186 struct config_param *config = &nic->config;
1187
1188 for (i = 0; i < config->tx_fifo_num; i++) {
1189 /*
1190 * TTI Initialization. Default Tx timer gets us about
1191 * 250 interrupts per sec. Continuous interrupts are enabled
1192 * by default.
1193 */
1194 if (nic->device_type == XFRAME_II_DEVICE) {
1195 int count = (nic->config.bus_speed * 125)/2;
1196 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
1197 } else
1198 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
1199
1200 val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
1201 TTI_DATA1_MEM_TX_URNG_B(0x10) |
1202 TTI_DATA1_MEM_TX_URNG_C(0x30) |
1203 TTI_DATA1_MEM_TX_TIMER_AC_EN;
1204 if (i == 0)
1205 if (use_continuous_tx_intrs && (link == LINK_UP))
1206 val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
1207 writeq(val64, &bar0->tti_data1_mem);
1208
1209 if (nic->config.intr_type == MSI_X) {
1210 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1211 TTI_DATA2_MEM_TX_UFC_B(0x100) |
1212 TTI_DATA2_MEM_TX_UFC_C(0x200) |
1213 TTI_DATA2_MEM_TX_UFC_D(0x300);
1214 } else {
1215 if ((nic->config.tx_steering_type ==
1216 TX_DEFAULT_STEERING) &&
1217 (config->tx_fifo_num > 1) &&
1218 (i >= nic->udp_fifo_idx) &&
1219 (i < (nic->udp_fifo_idx +
1220 nic->total_udp_fifos)))
1221 val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
1222 TTI_DATA2_MEM_TX_UFC_B(0x80) |
1223 TTI_DATA2_MEM_TX_UFC_C(0x100) |
1224 TTI_DATA2_MEM_TX_UFC_D(0x120);
1225 else
1226 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1227 TTI_DATA2_MEM_TX_UFC_B(0x20) |
1228 TTI_DATA2_MEM_TX_UFC_C(0x40) |
1229 TTI_DATA2_MEM_TX_UFC_D(0x80);
1230 }
1231
1232 writeq(val64, &bar0->tti_data2_mem);
1233
1234 val64 = TTI_CMD_MEM_WE |
1235 TTI_CMD_MEM_STROBE_NEW_CMD |
1236 TTI_CMD_MEM_OFFSET(i);
1237 writeq(val64, &bar0->tti_command_mem);
1238
1239 if (wait_for_cmd_complete(&bar0->tti_command_mem,
1240 TTI_CMD_MEM_STROBE_NEW_CMD,
1241 S2IO_BIT_RESET) != SUCCESS)
1242 return FAILURE;
1243 }
1244
1245 return SUCCESS;
1246 }
1247
1248 /**
1249 * init_nic - Initialization of hardware
1250 * @nic: device private variable
1251 * Description: The function sequentially configures every block
1252 * of the H/W from their reset values.
1253 * Return Value: SUCCESS on success and
1254 * '-1' on failure (endian settings incorrect).
1255 */
1256
1257 static int init_nic(struct s2io_nic *nic)
1258 {
1259 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1260 struct net_device *dev = nic->dev;
1261 register u64 val64 = 0;
1262 void __iomem *add;
1263 u32 time;
1264 int i, j;
1265 int dtx_cnt = 0;
1266 unsigned long long mem_share;
1267 int mem_size;
1268 struct config_param *config = &nic->config;
1269 struct mac_info *mac_control = &nic->mac_control;
1270
1271 /* to set the swapper controle on the card */
1272 if (s2io_set_swapper(nic)) {
1273 DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");
1274 return -EIO;
1275 }
1276
1277 /*
1278 * Herc requires EOI to be removed from reset before XGXS, so..
1279 */
1280 if (nic->device_type & XFRAME_II_DEVICE) {
1281 val64 = 0xA500000000ULL;
1282 writeq(val64, &bar0->sw_reset);
1283 msleep(500);
1284 val64 = readq(&bar0->sw_reset);
1285 }
1286
1287 /* Remove XGXS from reset state */
1288 val64 = 0;
1289 writeq(val64, &bar0->sw_reset);
1290 msleep(500);
1291 val64 = readq(&bar0->sw_reset);
1292
1293 /* Ensure that it's safe to access registers by checking
1294 * RIC_RUNNING bit is reset. Check is valid only for XframeII.
1295 */
1296 if (nic->device_type == XFRAME_II_DEVICE) {
1297 for (i = 0; i < 50; i++) {
1298 val64 = readq(&bar0->adapter_status);
1299 if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
1300 break;
1301 msleep(10);
1302 }
1303 if (i == 50)
1304 return -ENODEV;
1305 }
1306
1307 /* Enable Receiving broadcasts */
1308 add = &bar0->mac_cfg;
1309 val64 = readq(&bar0->mac_cfg);
1310 val64 |= MAC_RMAC_BCAST_ENABLE;
1311 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1312 writel((u32)val64, add);
1313 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1314 writel((u32) (val64 >> 32), (add + 4));
1315
1316 /* Read registers in all blocks */
1317 val64 = readq(&bar0->mac_int_mask);
1318 val64 = readq(&bar0->mc_int_mask);
1319 val64 = readq(&bar0->xgxs_int_mask);
1320
1321 /* Set MTU */
1322 val64 = dev->mtu;
1323 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
1324
1325 if (nic->device_type & XFRAME_II_DEVICE) {
1326 while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
1327 SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
1328 &bar0->dtx_control, UF);
1329 if (dtx_cnt & 0x1)
1330 msleep(1); /* Necessary!! */
1331 dtx_cnt++;
1332 }
1333 } else {
1334 while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
1335 SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
1336 &bar0->dtx_control, UF);
1337 val64 = readq(&bar0->dtx_control);
1338 dtx_cnt++;
1339 }
1340 }
1341
1342 /* Tx DMA Initialization */
1343 val64 = 0;
1344 writeq(val64, &bar0->tx_fifo_partition_0);
1345 writeq(val64, &bar0->tx_fifo_partition_1);
1346 writeq(val64, &bar0->tx_fifo_partition_2);
1347 writeq(val64, &bar0->tx_fifo_partition_3);
1348
1349 for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
1350 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
1351
1352 val64 |= vBIT(tx_cfg->fifo_len - 1, ((j * 32) + 19), 13) |
1353 vBIT(tx_cfg->fifo_priority, ((j * 32) + 5), 3);
1354
1355 if (i == (config->tx_fifo_num - 1)) {
1356 if (i % 2 == 0)
1357 i++;
1358 }
1359
1360 switch (i) {
1361 case 1:
1362 writeq(val64, &bar0->tx_fifo_partition_0);
1363 val64 = 0;
1364 j = 0;
1365 break;
1366 case 3:
1367 writeq(val64, &bar0->tx_fifo_partition_1);
1368 val64 = 0;
1369 j = 0;
1370 break;
1371 case 5:
1372 writeq(val64, &bar0->tx_fifo_partition_2);
1373 val64 = 0;
1374 j = 0;
1375 break;
1376 case 7:
1377 writeq(val64, &bar0->tx_fifo_partition_3);
1378 val64 = 0;
1379 j = 0;
1380 break;
1381 default:
1382 j++;
1383 break;
1384 }
1385 }
1386
1387 /*
1388 * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
1389 * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
1390 */
1391 if ((nic->device_type == XFRAME_I_DEVICE) && (nic->pdev->revision < 4))
1392 writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
1393
1394 val64 = readq(&bar0->tx_fifo_partition_0);
1395 DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
1396 &bar0->tx_fifo_partition_0, (unsigned long long)val64);
1397
1398 /*
1399 * Initialization of Tx_PA_CONFIG register to ignore packet
1400 * integrity checking.
1401 */
1402 val64 = readq(&bar0->tx_pa_cfg);
1403 val64 |= TX_PA_CFG_IGNORE_FRM_ERR |
1404 TX_PA_CFG_IGNORE_SNAP_OUI |
1405 TX_PA_CFG_IGNORE_LLC_CTRL |
1406 TX_PA_CFG_IGNORE_L2_ERR;
1407 writeq(val64, &bar0->tx_pa_cfg);
1408
1409 /* Rx DMA intialization. */
1410 val64 = 0;
1411 for (i = 0; i < config->rx_ring_num; i++) {
1412 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
1413
1414 val64 |= vBIT(rx_cfg->ring_priority, (5 + (i * 8)), 3);
1415 }
1416 writeq(val64, &bar0->rx_queue_priority);
1417
1418 /*
1419 * Allocating equal share of memory to all the
1420 * configured Rings.
1421 */
1422 val64 = 0;
1423 if (nic->device_type & XFRAME_II_DEVICE)
1424 mem_size = 32;
1425 else
1426 mem_size = 64;
1427
1428 for (i = 0; i < config->rx_ring_num; i++) {
1429 switch (i) {
1430 case 0:
1431 mem_share = (mem_size / config->rx_ring_num +
1432 mem_size % config->rx_ring_num);
1433 val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
1434 continue;
1435 case 1:
1436 mem_share = (mem_size / config->rx_ring_num);
1437 val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
1438 continue;
1439 case 2:
1440 mem_share = (mem_size / config->rx_ring_num);
1441 val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
1442 continue;
1443 case 3:
1444 mem_share = (mem_size / config->rx_ring_num);
1445 val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
1446 continue;
1447 case 4:
1448 mem_share = (mem_size / config->rx_ring_num);
1449 val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
1450 continue;
1451 case 5:
1452 mem_share = (mem_size / config->rx_ring_num);
1453 val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
1454 continue;
1455 case 6:
1456 mem_share = (mem_size / config->rx_ring_num);
1457 val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
1458 continue;
1459 case 7:
1460 mem_share = (mem_size / config->rx_ring_num);
1461 val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
1462 continue;
1463 }
1464 }
1465 writeq(val64, &bar0->rx_queue_cfg);
1466
1467 /*
1468 * Filling Tx round robin registers
1469 * as per the number of FIFOs for equal scheduling priority
1470 */
1471 switch (config->tx_fifo_num) {
1472 case 1:
1473 val64 = 0x0;
1474 writeq(val64, &bar0->tx_w_round_robin_0);
1475 writeq(val64, &bar0->tx_w_round_robin_1);
1476 writeq(val64, &bar0->tx_w_round_robin_2);
1477 writeq(val64, &bar0->tx_w_round_robin_3);
1478 writeq(val64, &bar0->tx_w_round_robin_4);
1479 break;
1480 case 2:
1481 val64 = 0x0001000100010001ULL;
1482 writeq(val64, &bar0->tx_w_round_robin_0);
1483 writeq(val64, &bar0->tx_w_round_robin_1);
1484 writeq(val64, &bar0->tx_w_round_robin_2);
1485 writeq(val64, &bar0->tx_w_round_robin_3);
1486 val64 = 0x0001000100000000ULL;
1487 writeq(val64, &bar0->tx_w_round_robin_4);
1488 break;
1489 case 3:
1490 val64 = 0x0001020001020001ULL;
1491 writeq(val64, &bar0->tx_w_round_robin_0);
1492 val64 = 0x0200010200010200ULL;
1493 writeq(val64, &bar0->tx_w_round_robin_1);
1494 val64 = 0x0102000102000102ULL;
1495 writeq(val64, &bar0->tx_w_round_robin_2);
1496 val64 = 0x0001020001020001ULL;
1497 writeq(val64, &bar0->tx_w_round_robin_3);
1498 val64 = 0x0200010200000000ULL;
1499 writeq(val64, &bar0->tx_w_round_robin_4);
1500 break;
1501 case 4:
1502 val64 = 0x0001020300010203ULL;
1503 writeq(val64, &bar0->tx_w_round_robin_0);
1504 writeq(val64, &bar0->tx_w_round_robin_1);
1505 writeq(val64, &bar0->tx_w_round_robin_2);
1506 writeq(val64, &bar0->tx_w_round_robin_3);
1507 val64 = 0x0001020300000000ULL;
1508 writeq(val64, &bar0->tx_w_round_robin_4);
1509 break;
1510 case 5:
1511 val64 = 0x0001020304000102ULL;
1512 writeq(val64, &bar0->tx_w_round_robin_0);
1513 val64 = 0x0304000102030400ULL;
1514 writeq(val64, &bar0->tx_w_round_robin_1);
1515 val64 = 0x0102030400010203ULL;
1516 writeq(val64, &bar0->tx_w_round_robin_2);
1517 val64 = 0x0400010203040001ULL;
1518 writeq(val64, &bar0->tx_w_round_robin_3);
1519 val64 = 0x0203040000000000ULL;
1520 writeq(val64, &bar0->tx_w_round_robin_4);
1521 break;
1522 case 6:
1523 val64 = 0x0001020304050001ULL;
1524 writeq(val64, &bar0->tx_w_round_robin_0);
1525 val64 = 0x0203040500010203ULL;
1526 writeq(val64, &bar0->tx_w_round_robin_1);
1527 val64 = 0x0405000102030405ULL;
1528 writeq(val64, &bar0->tx_w_round_robin_2);
1529 val64 = 0x0001020304050001ULL;
1530 writeq(val64, &bar0->tx_w_round_robin_3);
1531 val64 = 0x0203040500000000ULL;
1532 writeq(val64, &bar0->tx_w_round_robin_4);
1533 break;
1534 case 7:
1535 val64 = 0x0001020304050600ULL;
1536 writeq(val64, &bar0->tx_w_round_robin_0);
1537 val64 = 0x0102030405060001ULL;
1538 writeq(val64, &bar0->tx_w_round_robin_1);
1539 val64 = 0x0203040506000102ULL;
1540 writeq(val64, &bar0->tx_w_round_robin_2);
1541 val64 = 0x0304050600010203ULL;
1542 writeq(val64, &bar0->tx_w_round_robin_3);
1543 val64 = 0x0405060000000000ULL;
1544 writeq(val64, &bar0->tx_w_round_robin_4);
1545 break;
1546 case 8:
1547 val64 = 0x0001020304050607ULL;
1548 writeq(val64, &bar0->tx_w_round_robin_0);
1549 writeq(val64, &bar0->tx_w_round_robin_1);
1550 writeq(val64, &bar0->tx_w_round_robin_2);
1551 writeq(val64, &bar0->tx_w_round_robin_3);
1552 val64 = 0x0001020300000000ULL;
1553 writeq(val64, &bar0->tx_w_round_robin_4);
1554 break;
1555 }
1556
1557 /* Enable all configured Tx FIFO partitions */
1558 val64 = readq(&bar0->tx_fifo_partition_0);
1559 val64 |= (TX_FIFO_PARTITION_EN);
1560 writeq(val64, &bar0->tx_fifo_partition_0);
1561
1562 /* Filling the Rx round robin registers as per the
1563 * number of Rings and steering based on QoS with
1564 * equal priority.
1565 */
1566 switch (config->rx_ring_num) {
1567 case 1:
1568 val64 = 0x0;
1569 writeq(val64, &bar0->rx_w_round_robin_0);
1570 writeq(val64, &bar0->rx_w_round_robin_1);
1571 writeq(val64, &bar0->rx_w_round_robin_2);
1572 writeq(val64, &bar0->rx_w_round_robin_3);
1573 writeq(val64, &bar0->rx_w_round_robin_4);
1574
1575 val64 = 0x8080808080808080ULL;
1576 writeq(val64, &bar0->rts_qos_steering);
1577 break;
1578 case 2:
1579 val64 = 0x0001000100010001ULL;
1580 writeq(val64, &bar0->rx_w_round_robin_0);
1581 writeq(val64, &bar0->rx_w_round_robin_1);
1582 writeq(val64, &bar0->rx_w_round_robin_2);
1583 writeq(val64, &bar0->rx_w_round_robin_3);
1584 val64 = 0x0001000100000000ULL;
1585 writeq(val64, &bar0->rx_w_round_robin_4);
1586
1587 val64 = 0x8080808040404040ULL;
1588 writeq(val64, &bar0->rts_qos_steering);
1589 break;
1590 case 3:
1591 val64 = 0x0001020001020001ULL;
1592 writeq(val64, &bar0->rx_w_round_robin_0);
1593 val64 = 0x0200010200010200ULL;
1594 writeq(val64, &bar0->rx_w_round_robin_1);
1595 val64 = 0x0102000102000102ULL;
1596 writeq(val64, &bar0->rx_w_round_robin_2);
1597 val64 = 0x0001020001020001ULL;
1598 writeq(val64, &bar0->rx_w_round_robin_3);
1599 val64 = 0x0200010200000000ULL;
1600 writeq(val64, &bar0->rx_w_round_robin_4);
1601
1602 val64 = 0x8080804040402020ULL;
1603 writeq(val64, &bar0->rts_qos_steering);
1604 break;
1605 case 4:
1606 val64 = 0x0001020300010203ULL;
1607 writeq(val64, &bar0->rx_w_round_robin_0);
1608 writeq(val64, &bar0->rx_w_round_robin_1);
1609 writeq(val64, &bar0->rx_w_round_robin_2);
1610 writeq(val64, &bar0->rx_w_round_robin_3);
1611 val64 = 0x0001020300000000ULL;
1612 writeq(val64, &bar0->rx_w_round_robin_4);
1613
1614 val64 = 0x8080404020201010ULL;
1615 writeq(val64, &bar0->rts_qos_steering);
1616 break;
1617 case 5:
1618 val64 = 0x0001020304000102ULL;
1619 writeq(val64, &bar0->rx_w_round_robin_0);
1620 val64 = 0x0304000102030400ULL;
1621 writeq(val64, &bar0->rx_w_round_robin_1);
1622 val64 = 0x0102030400010203ULL;
1623 writeq(val64, &bar0->rx_w_round_robin_2);
1624 val64 = 0x0400010203040001ULL;
1625 writeq(val64, &bar0->rx_w_round_robin_3);
1626 val64 = 0x0203040000000000ULL;
1627 writeq(val64, &bar0->rx_w_round_robin_4);
1628
1629 val64 = 0x8080404020201008ULL;
1630 writeq(val64, &bar0->rts_qos_steering);
1631 break;
1632 case 6:
1633 val64 = 0x0001020304050001ULL;
1634 writeq(val64, &bar0->rx_w_round_robin_0);
1635 val64 = 0x0203040500010203ULL;
1636 writeq(val64, &bar0->rx_w_round_robin_1);
1637 val64 = 0x0405000102030405ULL;
1638 writeq(val64, &bar0->rx_w_round_robin_2);
1639 val64 = 0x0001020304050001ULL;
1640 writeq(val64, &bar0->rx_w_round_robin_3);
1641 val64 = 0x0203040500000000ULL;
1642 writeq(val64, &bar0->rx_w_round_robin_4);
1643
1644 val64 = 0x8080404020100804ULL;
1645 writeq(val64, &bar0->rts_qos_steering);
1646 break;
1647 case 7:
1648 val64 = 0x0001020304050600ULL;
1649 writeq(val64, &bar0->rx_w_round_robin_0);
1650 val64 = 0x0102030405060001ULL;
1651 writeq(val64, &bar0->rx_w_round_robin_1);
1652 val64 = 0x0203040506000102ULL;
1653 writeq(val64, &bar0->rx_w_round_robin_2);
1654 val64 = 0x0304050600010203ULL;
1655 writeq(val64, &bar0->rx_w_round_robin_3);
1656 val64 = 0x0405060000000000ULL;
1657 writeq(val64, &bar0->rx_w_round_robin_4);
1658
1659 val64 = 0x8080402010080402ULL;
1660 writeq(val64, &bar0->rts_qos_steering);
1661 break;
1662 case 8:
1663 val64 = 0x0001020304050607ULL;
1664 writeq(val64, &bar0->rx_w_round_robin_0);
1665 writeq(val64, &bar0->rx_w_round_robin_1);
1666 writeq(val64, &bar0->rx_w_round_robin_2);
1667 writeq(val64, &bar0->rx_w_round_robin_3);
1668 val64 = 0x0001020300000000ULL;
1669 writeq(val64, &bar0->rx_w_round_robin_4);
1670
1671 val64 = 0x8040201008040201ULL;
1672 writeq(val64, &bar0->rts_qos_steering);
1673 break;
1674 }
1675
1676 /* UDP Fix */
1677 val64 = 0;
1678 for (i = 0; i < 8; i++)
1679 writeq(val64, &bar0->rts_frm_len_n[i]);
1680
1681 /* Set the default rts frame length for the rings configured */
1682 val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
1683 for (i = 0 ; i < config->rx_ring_num ; i++)
1684 writeq(val64, &bar0->rts_frm_len_n[i]);
1685
1686 /* Set the frame length for the configured rings
1687 * desired by the user
1688 */
1689 for (i = 0; i < config->rx_ring_num; i++) {
1690 /* If rts_frm_len[i] == 0 then it is assumed that user not
1691 * specified frame length steering.
1692 * If the user provides the frame length then program
1693 * the rts_frm_len register for those values or else
1694 * leave it as it is.
1695 */
1696 if (rts_frm_len[i] != 0) {
1697 writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
1698 &bar0->rts_frm_len_n[i]);
1699 }
1700 }
1701
1702 /* Disable differentiated services steering logic */
1703 for (i = 0; i < 64; i++) {
1704 if (rts_ds_steer(nic, i, 0) == FAILURE) {
1705 DBG_PRINT(ERR_DBG,
1706 "%s: rts_ds_steer failed on codepoint %d\n",
1707 dev->name, i);
1708 return -ENODEV;
1709 }
1710 }
1711
1712 /* Program statistics memory */
1713 writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
1714
1715 if (nic->device_type == XFRAME_II_DEVICE) {
1716 val64 = STAT_BC(0x320);
1717 writeq(val64, &bar0->stat_byte_cnt);
1718 }
1719
1720 /*
1721 * Initializing the sampling rate for the device to calculate the
1722 * bandwidth utilization.
1723 */
1724 val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
1725 MAC_RX_LINK_UTIL_VAL(rmac_util_period);
1726 writeq(val64, &bar0->mac_link_util);
1727
1728 /*
1729 * Initializing the Transmit and Receive Traffic Interrupt
1730 * Scheme.
1731 */
1732
1733 /* Initialize TTI */
1734 if (SUCCESS != init_tti(nic, nic->last_link_state))
1735 return -ENODEV;
1736
1737 /* RTI Initialization */
1738 if (nic->device_type == XFRAME_II_DEVICE) {
1739 /*
1740 * Programmed to generate Apprx 500 Intrs per
1741 * second
1742 */
1743 int count = (nic->config.bus_speed * 125)/4;
1744 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
1745 } else
1746 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
1747 val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
1748 RTI_DATA1_MEM_RX_URNG_B(0x10) |
1749 RTI_DATA1_MEM_RX_URNG_C(0x30) |
1750 RTI_DATA1_MEM_RX_TIMER_AC_EN;
1751
1752 writeq(val64, &bar0->rti_data1_mem);
1753
1754 val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
1755 RTI_DATA2_MEM_RX_UFC_B(0x2) ;
1756 if (nic->config.intr_type == MSI_X)
1757 val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) |
1758 RTI_DATA2_MEM_RX_UFC_D(0x40));
1759 else
1760 val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) |
1761 RTI_DATA2_MEM_RX_UFC_D(0x80));
1762 writeq(val64, &bar0->rti_data2_mem);
1763
1764 for (i = 0; i < config->rx_ring_num; i++) {
1765 val64 = RTI_CMD_MEM_WE |
1766 RTI_CMD_MEM_STROBE_NEW_CMD |
1767 RTI_CMD_MEM_OFFSET(i);
1768 writeq(val64, &bar0->rti_command_mem);
1769
1770 /*
1771 * Once the operation completes, the Strobe bit of the
1772 * command register will be reset. We poll for this
1773 * particular condition. We wait for a maximum of 500ms
1774 * for the operation to complete, if it's not complete
1775 * by then we return error.
1776 */
1777 time = 0;
1778 while (true) {
1779 val64 = readq(&bar0->rti_command_mem);
1780 if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
1781 break;
1782
1783 if (time > 10) {
1784 DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",
1785 dev->name);
1786 return -ENODEV;
1787 }
1788 time++;
1789 msleep(50);
1790 }
1791 }
1792
1793 /*
1794 * Initializing proper values as Pause threshold into all
1795 * the 8 Queues on Rx side.
1796 */
1797 writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
1798 writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
1799
1800 /* Disable RMAC PAD STRIPPING */
1801 add = &bar0->mac_cfg;
1802 val64 = readq(&bar0->mac_cfg);
1803 val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
1804 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1805 writel((u32) (val64), add);
1806 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1807 writel((u32) (val64 >> 32), (add + 4));
1808 val64 = readq(&bar0->mac_cfg);
1809
1810 /* Enable FCS stripping by adapter */
1811 add = &bar0->mac_cfg;
1812 val64 = readq(&bar0->mac_cfg);
1813 val64 |= MAC_CFG_RMAC_STRIP_FCS;
1814 if (nic->device_type == XFRAME_II_DEVICE)
1815 writeq(val64, &bar0->mac_cfg);
1816 else {
1817 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1818 writel((u32) (val64), add);
1819 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1820 writel((u32) (val64 >> 32), (add + 4));
1821 }
1822
1823 /*
1824 * Set the time value to be inserted in the pause frame
1825 * generated by xena.
1826 */
1827 val64 = readq(&bar0->rmac_pause_cfg);
1828 val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
1829 val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
1830 writeq(val64, &bar0->rmac_pause_cfg);
1831
1832 /*
1833 * Set the Threshold Limit for Generating the pause frame
1834 * If the amount of data in any Queue exceeds ratio of
1835 * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
1836 * pause frame is generated
1837 */
1838 val64 = 0;
1839 for (i = 0; i < 4; i++) {
1840 val64 |= (((u64)0xFF00 |
1841 nic->mac_control.mc_pause_threshold_q0q3)
1842 << (i * 2 * 8));
1843 }
1844 writeq(val64, &bar0->mc_pause_thresh_q0q3);
1845
1846 val64 = 0;
1847 for (i = 0; i < 4; i++) {
1848 val64 |= (((u64)0xFF00 |
1849 nic->mac_control.mc_pause_threshold_q4q7)
1850 << (i * 2 * 8));
1851 }
1852 writeq(val64, &bar0->mc_pause_thresh_q4q7);
1853
1854 /*
1855 * TxDMA will stop Read request if the number of read split has
1856 * exceeded the limit pointed by shared_splits
1857 */
1858 val64 = readq(&bar0->pic_control);
1859 val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
1860 writeq(val64, &bar0->pic_control);
1861
1862 if (nic->config.bus_speed == 266) {
1863 writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout);
1864 writeq(0x0, &bar0->read_retry_delay);
1865 writeq(0x0, &bar0->write_retry_delay);
1866 }
1867
1868 /*
1869 * Programming the Herc to split every write transaction
1870 * that does not start on an ADB to reduce disconnects.
1871 */
1872 if (nic->device_type == XFRAME_II_DEVICE) {
1873 val64 = FAULT_BEHAVIOUR | EXT_REQ_EN |
1874 MISC_LINK_STABILITY_PRD(3);
1875 writeq(val64, &bar0->misc_control);
1876 val64 = readq(&bar0->pic_control2);
1877 val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15));
1878 writeq(val64, &bar0->pic_control2);
1879 }
1880 if (strstr(nic->product_name, "CX4")) {
1881 val64 = TMAC_AVG_IPG(0x17);
1882 writeq(val64, &bar0->tmac_avg_ipg);
1883 }
1884
1885 return SUCCESS;
1886 }
1887 #define LINK_UP_DOWN_INTERRUPT 1
1888 #define MAC_RMAC_ERR_TIMER 2
1889
1890 static int s2io_link_fault_indication(struct s2io_nic *nic)
1891 {
1892 if (nic->device_type == XFRAME_II_DEVICE)
1893 return LINK_UP_DOWN_INTERRUPT;
1894 else
1895 return MAC_RMAC_ERR_TIMER;
1896 }
1897
1898 /**
1899 * do_s2io_write_bits - update alarm bits in alarm register
1900 * @value: alarm bits
1901 * @flag: interrupt status
1902 * @addr: address value
1903 * Description: update alarm bits in alarm register
1904 * Return Value:
1905 * NONE.
1906 */
1907 static void do_s2io_write_bits(u64 value, int flag, void __iomem *addr)
1908 {
1909 u64 temp64;
1910
1911 temp64 = readq(addr);
1912
1913 if (flag == ENABLE_INTRS)
1914 temp64 &= ~((u64)value);
1915 else
1916 temp64 |= ((u64)value);
1917 writeq(temp64, addr);
1918 }
1919
1920 static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag)
1921 {
1922 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1923 register u64 gen_int_mask = 0;
1924 u64 interruptible;
1925
1926 writeq(DISABLE_ALL_INTRS, &bar0->general_int_mask);
1927 if (mask & TX_DMA_INTR) {
1928 gen_int_mask |= TXDMA_INT_M;
1929
1930 do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT |
1931 TXDMA_PCC_INT | TXDMA_TTI_INT |
1932 TXDMA_LSO_INT | TXDMA_TPA_INT |
1933 TXDMA_SM_INT, flag, &bar0->txdma_int_mask);
1934
1935 do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
1936 PFC_MISC_0_ERR | PFC_MISC_1_ERR |
1937 PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag,
1938 &bar0->pfc_err_mask);
1939
1940 do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
1941 TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR |
1942 TDA_PCIX_ERR, flag, &bar0->tda_err_mask);
1943
1944 do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR |
1945 PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
1946 PCC_N_SERR | PCC_6_COF_OV_ERR |
1947 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
1948 PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR |
1949 PCC_TXB_ECC_SG_ERR,
1950 flag, &bar0->pcc_err_mask);
1951
1952 do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR |
1953 TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask);
1954
1955 do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT |
1956 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM |
1957 LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
1958 flag, &bar0->lso_err_mask);
1959
1960 do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP,
1961 flag, &bar0->tpa_err_mask);
1962
1963 do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask);
1964 }
1965
1966 if (mask & TX_MAC_INTR) {
1967 gen_int_mask |= TXMAC_INT_M;
1968 do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag,
1969 &bar0->mac_int_mask);
1970 do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR |
1971 TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
1972 TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
1973 flag, &bar0->mac_tmac_err_mask);
1974 }
1975
1976 if (mask & TX_XGXS_INTR) {
1977 gen_int_mask |= TXXGXS_INT_M;
1978 do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag,
1979 &bar0->xgxs_int_mask);
1980 do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR |
1981 TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
1982 flag, &bar0->xgxs_txgxs_err_mask);
1983 }
1984
1985 if (mask & RX_DMA_INTR) {
1986 gen_int_mask |= RXDMA_INT_M;
1987 do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M |
1988 RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M,
1989 flag, &bar0->rxdma_int_mask);
1990 do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR |
1991 RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM |
1992 RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR |
1993 RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask);
1994 do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn |
1995 PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn |
1996 PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag,
1997 &bar0->prc_pcix_err_mask);
1998 do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR |
1999 RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag,
2000 &bar0->rpa_err_mask);
2001 do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR |
2002 RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM |
2003 RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR |
2004 RDA_FRM_ECC_SG_ERR |
2005 RDA_MISC_ERR|RDA_PCIX_ERR,
2006 flag, &bar0->rda_err_mask);
2007 do_s2io_write_bits(RTI_SM_ERR_ALARM |
2008 RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
2009 flag, &bar0->rti_err_mask);
2010 }
2011
2012 if (mask & RX_MAC_INTR) {
2013 gen_int_mask |= RXMAC_INT_M;
2014 do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag,
2015 &bar0->mac_int_mask);
2016 interruptible = (RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR |
2017 RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR |
2018 RMAC_DOUBLE_ECC_ERR);
2019 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER)
2020 interruptible |= RMAC_LINK_STATE_CHANGE_INT;
2021 do_s2io_write_bits(interruptible,
2022 flag, &bar0->mac_rmac_err_mask);
2023 }
2024
2025 if (mask & RX_XGXS_INTR) {
2026 gen_int_mask |= RXXGXS_INT_M;
2027 do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag,
2028 &bar0->xgxs_int_mask);
2029 do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag,
2030 &bar0->xgxs_rxgxs_err_mask);
2031 }
2032
2033 if (mask & MC_INTR) {
2034 gen_int_mask |= MC_INT_M;
2035 do_s2io_write_bits(MC_INT_MASK_MC_INT,
2036 flag, &bar0->mc_int_mask);
2037 do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG |
2038 MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag,
2039 &bar0->mc_err_mask);
2040 }
2041 nic->general_int_mask = gen_int_mask;
2042
2043 /* Remove this line when alarm interrupts are enabled */
2044 nic->general_int_mask = 0;
2045 }
2046
2047 /**
2048 * en_dis_able_nic_intrs - Enable or Disable the interrupts
2049 * @nic: device private variable,
2050 * @mask: A mask indicating which Intr block must be modified and,
2051 * @flag: A flag indicating whether to enable or disable the Intrs.
2052 * Description: This function will either disable or enable the interrupts
2053 * depending on the flag argument. The mask argument can be used to
2054 * enable/disable any Intr block.
2055 * Return Value: NONE.
2056 */
2057
2058 static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
2059 {
2060 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2061 register u64 temp64 = 0, intr_mask = 0;
2062
2063 intr_mask = nic->general_int_mask;
2064
2065 /* Top level interrupt classification */
2066 /* PIC Interrupts */
2067 if (mask & TX_PIC_INTR) {
2068 /* Enable PIC Intrs in the general intr mask register */
2069 intr_mask |= TXPIC_INT_M;
2070 if (flag == ENABLE_INTRS) {
2071 /*
2072 * If Hercules adapter enable GPIO otherwise
2073 * disable all PCIX, Flash, MDIO, IIC and GPIO
2074 * interrupts for now.
2075 * TODO
2076 */
2077 if (s2io_link_fault_indication(nic) ==
2078 LINK_UP_DOWN_INTERRUPT) {
2079 do_s2io_write_bits(PIC_INT_GPIO, flag,
2080 &bar0->pic_int_mask);
2081 do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag,
2082 &bar0->gpio_int_mask);
2083 } else
2084 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2085 } else if (flag == DISABLE_INTRS) {
2086 /*
2087 * Disable PIC Intrs in the general
2088 * intr mask register
2089 */
2090 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2091 }
2092 }
2093
2094 /* Tx traffic interrupts */
2095 if (mask & TX_TRAFFIC_INTR) {
2096 intr_mask |= TXTRAFFIC_INT_M;
2097 if (flag == ENABLE_INTRS) {
2098 /*
2099 * Enable all the Tx side interrupts
2100 * writing 0 Enables all 64 TX interrupt levels
2101 */
2102 writeq(0x0, &bar0->tx_traffic_mask);
2103 } else if (flag == DISABLE_INTRS) {
2104 /*
2105 * Disable Tx Traffic Intrs in the general intr mask
2106 * register.
2107 */
2108 writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
2109 }
2110 }
2111
2112 /* Rx traffic interrupts */
2113 if (mask & RX_TRAFFIC_INTR) {
2114 intr_mask |= RXTRAFFIC_INT_M;
2115 if (flag == ENABLE_INTRS) {
2116 /* writing 0 Enables all 8 RX interrupt levels */
2117 writeq(0x0, &bar0->rx_traffic_mask);
2118 } else if (flag == DISABLE_INTRS) {
2119 /*
2120 * Disable Rx Traffic Intrs in the general intr mask
2121 * register.
2122 */
2123 writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
2124 }
2125 }
2126
2127 temp64 = readq(&bar0->general_int_mask);
2128 if (flag == ENABLE_INTRS)
2129 temp64 &= ~((u64)intr_mask);
2130 else
2131 temp64 = DISABLE_ALL_INTRS;
2132 writeq(temp64, &bar0->general_int_mask);
2133
2134 nic->general_int_mask = readq(&bar0->general_int_mask);
2135 }
2136
2137 /**
2138 * verify_pcc_quiescent- Checks for PCC quiescent state
2139 * Return: 1 If PCC is quiescence
2140 * 0 If PCC is not quiescence
2141 */
2142 static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
2143 {
2144 int ret = 0, herc;
2145 struct XENA_dev_config __iomem *bar0 = sp->bar0;
2146 u64 val64 = readq(&bar0->adapter_status);
2147
2148 herc = (sp->device_type == XFRAME_II_DEVICE);
2149
2150 if (flag == false) {
2151 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2152 if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
2153 ret = 1;
2154 } else {
2155 if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2156 ret = 1;
2157 }
2158 } else {
2159 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2160 if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
2161 ADAPTER_STATUS_RMAC_PCC_IDLE))
2162 ret = 1;
2163 } else {
2164 if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
2165 ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2166 ret = 1;
2167 }
2168 }
2169
2170 return ret;
2171 }
2172 /**
2173 * verify_xena_quiescence - Checks whether the H/W is ready
2174 * Description: Returns whether the H/W is ready to go or not. Depending
2175 * on whether adapter enable bit was written or not the comparison
2176 * differs and the calling function passes the input argument flag to
2177 * indicate this.
2178 * Return: 1 If xena is quiescence
2179 * 0 If Xena is not quiescence
2180 */
2181
2182 static int verify_xena_quiescence(struct s2io_nic *sp)
2183 {
2184 int mode;
2185 struct XENA_dev_config __iomem *bar0 = sp->bar0;
2186 u64 val64 = readq(&bar0->adapter_status);
2187 mode = s2io_verify_pci_mode(sp);
2188
2189 if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
2190 DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");
2191 return 0;
2192 }
2193 if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
2194 DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");
2195 return 0;
2196 }
2197 if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
2198 DBG_PRINT(ERR_DBG, "PFC is not ready!\n");
2199 return 0;
2200 }
2201 if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
2202 DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");
2203 return 0;
2204 }
2205 if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
2206 DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");
2207 return 0;
2208 }
2209 if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
2210 DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");
2211 return 0;
2212 }
2213 if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
2214 DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");
2215 return 0;
2216 }
2217 if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
2218 DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");
2219 return 0;
2220 }
2221
2222 /*
2223 * In PCI 33 mode, the P_PLL is not used, and therefore,
2224 * the the P_PLL_LOCK bit in the adapter_status register will
2225 * not be asserted.
2226 */
2227 if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
2228 sp->device_type == XFRAME_II_DEVICE &&
2229 mode != PCI_MODE_PCI_33) {
2230 DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");
2231 return 0;
2232 }
2233 if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
2234 ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
2235 DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");
2236 return 0;
2237 }
2238 return 1;
2239 }
2240
2241 /**
2242 * fix_mac_address - Fix for Mac addr problem on Alpha platforms
2243 * @sp: Pointer to device specifc structure
2244 * Description :
2245 * New procedure to clear mac address reading problems on Alpha platforms
2246 *
2247 */
2248
2249 static void fix_mac_address(struct s2io_nic *sp)
2250 {
2251 struct XENA_dev_config __iomem *bar0 = sp->bar0;
2252 u64 val64;
2253 int i = 0;
2254
2255 while (fix_mac[i] != END_SIGN) {
2256 writeq(fix_mac[i++], &bar0->gpio_control);
2257 udelay(10);
2258 val64 = readq(&bar0->gpio_control);
2259 }
2260 }
2261
2262 /**
2263 * start_nic - Turns the device on
2264 * @nic : device private variable.
2265 * Description:
2266 * This function actually turns the device on. Before this function is
2267 * called,all Registers are configured from their reset states
2268 * and shared memory is allocated but the NIC is still quiescent. On
2269 * calling this function, the device interrupts are cleared and the NIC is
2270 * literally switched on by writing into the adapter control register.
2271 * Return Value:
2272 * SUCCESS on success and -1 on failure.
2273 */
2274
2275 static int start_nic(struct s2io_nic *nic)
2276 {
2277 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2278 struct net_device *dev = nic->dev;
2279 register u64 val64 = 0;
2280 u16 subid, i;
2281 struct config_param *config = &nic->config;
2282 struct mac_info *mac_control = &nic->mac_control;
2283
2284 /* PRC Initialization and configuration */
2285 for (i = 0; i < config->rx_ring_num; i++) {
2286 struct ring_info *ring = &mac_control->rings[i];
2287
2288 writeq((u64)ring->rx_blocks[0].block_dma_addr,
2289 &bar0->prc_rxd0_n[i]);
2290
2291 val64 = readq(&bar0->prc_ctrl_n[i]);
2292 if (nic->rxd_mode == RXD_MODE_1)
2293 val64 |= PRC_CTRL_RC_ENABLED;
2294 else
2295 val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
2296 if (nic->device_type == XFRAME_II_DEVICE)
2297 val64 |= PRC_CTRL_GROUP_READS;
2298 val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
2299 val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
2300 writeq(val64, &bar0->prc_ctrl_n[i]);
2301 }
2302
2303 if (nic->rxd_mode == RXD_MODE_3B) {
2304 /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
2305 val64 = readq(&bar0->rx_pa_cfg);
2306 val64 |= RX_PA_CFG_IGNORE_L2_ERR;
2307 writeq(val64, &bar0->rx_pa_cfg);
2308 }
2309
2310 if (vlan_tag_strip == 0) {
2311 val64 = readq(&bar0->rx_pa_cfg);
2312 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
2313 writeq(val64, &bar0->rx_pa_cfg);
2314 nic->vlan_strip_flag = 0;
2315 }
2316
2317 /*
2318 * Enabling MC-RLDRAM. After enabling the device, we timeout
2319 * for around 100ms, which is approximately the time required
2320 * for the device to be ready for operation.
2321 */
2322 val64 = readq(&bar0->mc_rldram_mrs);
2323 val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
2324 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
2325 val64 = readq(&bar0->mc_rldram_mrs);
2326
2327 msleep(100); /* Delay by around 100 ms. */
2328
2329 /* Enabling ECC Protection. */
2330 val64 = readq(&bar0->adapter_control);
2331 val64 &= ~ADAPTER_ECC_EN;
2332 writeq(val64, &bar0->adapter_control);
2333
2334 /*
2335 * Verify if the device is ready to be enabled, if so enable
2336 * it.
2337 */
2338 val64 = readq(&bar0->adapter_status);
2339 if (!verify_xena_quiescence(nic)) {
2340 DBG_PRINT(ERR_DBG, "%s: device is not ready, "
2341 "Adapter status reads: 0x%llx\n",
2342 dev->name, (unsigned long long)val64);
2343 return FAILURE;
2344 }
2345
2346 /*
2347 * With some switches, link might be already up at this point.
2348 * Because of this weird behavior, when we enable laser,
2349 * we may not get link. We need to handle this. We cannot
2350 * figure out which switch is misbehaving. So we are forced to
2351 * make a global change.
2352 */
2353
2354 /* Enabling Laser. */
2355 val64 = readq(&bar0->adapter_control);
2356 val64 |= ADAPTER_EOI_TX_ON;
2357 writeq(val64, &bar0->adapter_control);
2358
2359 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
2360 /*
2361 * Dont see link state interrupts initally on some switches,
2362 * so directly scheduling the link state task here.
2363 */
2364 schedule_work(&nic->set_link_task);
2365 }
2366 /* SXE-002: Initialize link and activity LED */
2367 subid = nic->pdev->subsystem_device;
2368 if (((subid & 0xFF) >= 0x07) &&
2369 (nic->device_type == XFRAME_I_DEVICE)) {
2370 val64 = readq(&bar0->gpio_control);
2371 val64 |= 0x0000800000000000ULL;
2372 writeq(val64, &bar0->gpio_control);
2373 val64 = 0x0411040400000000ULL;
2374 writeq(val64, (void __iomem *)bar0 + 0x2700);
2375 }
2376
2377 return SUCCESS;
2378 }
2379 /**
2380 * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
2381 */
2382 static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data,
2383 struct TxD *txdlp, int get_off)
2384 {
2385 struct s2io_nic *nic = fifo_data->nic;
2386 struct sk_buff *skb;
2387 struct TxD *txds;
2388 u16 j, frg_cnt;
2389
2390 txds = txdlp;
2391 if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) {
2392 pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer,
2393 sizeof(u64), PCI_DMA_TODEVICE);
2394 txds++;
2395 }
2396
2397 skb = (struct sk_buff *)((unsigned long)txds->Host_Control);
2398 if (!skb) {
2399 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
2400 return NULL;
2401 }
2402 pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer,
2403 skb_headlen(skb), PCI_DMA_TODEVICE);
2404 frg_cnt = skb_shinfo(skb)->nr_frags;
2405 if (frg_cnt) {
2406 txds++;
2407 for (j = 0; j < frg_cnt; j++, txds++) {
2408 skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
2409 if (!txds->Buffer_Pointer)
2410 break;
2411 pci_unmap_page(nic->pdev,
2412 (dma_addr_t)txds->Buffer_Pointer,
2413 frag->size, PCI_DMA_TODEVICE);
2414 }
2415 }
2416 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
2417 return skb;
2418 }
2419
2420 /**
2421 * free_tx_buffers - Free all queued Tx buffers
2422 * @nic : device private variable.
2423 * Description:
2424 * Free all queued Tx buffers.
2425 * Return Value: void
2426 */
2427
2428 static void free_tx_buffers(struct s2io_nic *nic)
2429 {
2430 struct net_device *dev = nic->dev;
2431 struct sk_buff *skb;
2432 struct TxD *txdp;
2433 int i, j;
2434 int cnt = 0;
2435 struct config_param *config = &nic->config;
2436 struct mac_info *mac_control = &nic->mac_control;
2437 struct stat_block *stats = mac_control->stats_info;
2438 struct swStat *swstats = &stats->sw_stat;
2439
2440 for (i = 0; i < config->tx_fifo_num; i++) {
2441 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
2442 struct fifo_info *fifo = &mac_control->fifos[i];
2443 unsigned long flags;
2444
2445 spin_lock_irqsave(&fifo->tx_lock, flags);
2446 for (j = 0; j < tx_cfg->fifo_len; j++) {
2447 txdp = (struct TxD *)fifo->list_info[j].list_virt_addr;
2448 skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
2449 if (skb) {
2450 swstats->mem_freed += skb->truesize;
2451 dev_kfree_skb(skb);
2452 cnt++;
2453 }
2454 }
2455 DBG_PRINT(INTR_DBG,
2456 "%s: forcibly freeing %d skbs on FIFO%d\n",
2457 dev->name, cnt, i);
2458 fifo->tx_curr_get_info.offset = 0;
2459 fifo->tx_curr_put_info.offset = 0;
2460 spin_unlock_irqrestore(&fifo->tx_lock, flags);
2461 }
2462 }
2463
2464 /**
2465 * stop_nic - To stop the nic
2466 * @nic ; device private variable.
2467 * Description:
2468 * This function does exactly the opposite of what the start_nic()
2469 * function does. This function is called to stop the device.
2470 * Return Value:
2471 * void.
2472 */
2473
2474 static void stop_nic(struct s2io_nic *nic)
2475 {
2476 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2477 register u64 val64 = 0;
2478 u16 interruptible;
2479
2480 /* Disable all interrupts */
2481 en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS);
2482 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
2483 interruptible |= TX_PIC_INTR;
2484 en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
2485
2486 /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
2487 val64 = readq(&bar0->adapter_control);
2488 val64 &= ~(ADAPTER_CNTL_EN);
2489 writeq(val64, &bar0->adapter_control);
2490 }
2491
2492 /**
2493 * fill_rx_buffers - Allocates the Rx side skbs
2494 * @ring_info: per ring structure
2495 * @from_card_up: If this is true, we will map the buffer to get
2496 * the dma address for buf0 and buf1 to give it to the card.
2497 * Else we will sync the already mapped buffer to give it to the card.
2498 * Description:
2499 * The function allocates Rx side skbs and puts the physical
2500 * address of these buffers into the RxD buffer pointers, so that the NIC
2501 * can DMA the received frame into these locations.
2502 * The NIC supports 3 receive modes, viz
2503 * 1. single buffer,
2504 * 2. three buffer and
2505 * 3. Five buffer modes.
2506 * Each mode defines how many fragments the received frame will be split
2507 * up into by the NIC. The frame is split into L3 header, L4 Header,
2508 * L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
2509 * is split into 3 fragments. As of now only single buffer mode is
2510 * supported.
2511 * Return Value:
2512 * SUCCESS on success or an appropriate -ve value on failure.
2513 */
2514 static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring,
2515 int from_card_up)
2516 {
2517 struct sk_buff *skb;
2518 struct RxD_t *rxdp;
2519 int off, size, block_no, block_no1;
2520 u32 alloc_tab = 0;
2521 u32 alloc_cnt;
2522 u64 tmp;
2523 struct buffAdd *ba;
2524 struct RxD_t *first_rxdp = NULL;
2525 u64 Buffer0_ptr = 0, Buffer1_ptr = 0;
2526 int rxd_index = 0;
2527 struct RxD1 *rxdp1;
2528 struct RxD3 *rxdp3;
2529 struct swStat *swstats = &ring->nic->mac_control.stats_info->sw_stat;
2530
2531 alloc_cnt = ring->pkt_cnt - ring->rx_bufs_left;
2532
2533 block_no1 = ring->rx_curr_get_info.block_index;
2534 while (alloc_tab < alloc_cnt) {
2535 block_no = ring->rx_curr_put_info.block_index;
2536
2537 off = ring->rx_curr_put_info.offset;
2538
2539 rxdp = ring->rx_blocks[block_no].rxds[off].virt_addr;
2540
2541 rxd_index = off + 1;
2542 if (block_no)
2543 rxd_index += (block_no * ring->rxd_count);
2544
2545 if ((block_no == block_no1) &&
2546 (off == ring->rx_curr_get_info.offset) &&
2547 (rxdp->Host_Control)) {
2548 DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n",
2549 ring->dev->name);
2550 goto end;
2551 }
2552 if (off && (off == ring->rxd_count)) {
2553 ring->rx_curr_put_info.block_index++;
2554 if (ring->rx_curr_put_info.block_index ==
2555 ring->block_count)
2556 ring->rx_curr_put_info.block_index = 0;
2557 block_no = ring->rx_curr_put_info.block_index;
2558 off = 0;
2559 ring->rx_curr_put_info.offset = off;
2560 rxdp = ring->rx_blocks[block_no].block_virt_addr;
2561 DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
2562 ring->dev->name, rxdp);
2563
2564 }
2565
2566 if ((rxdp->Control_1 & RXD_OWN_XENA) &&
2567 ((ring->rxd_mode == RXD_MODE_3B) &&
2568 (rxdp->Control_2 & s2BIT(0)))) {
2569 ring->rx_curr_put_info.offset = off;
2570 goto end;
2571 }
2572 /* calculate size of skb based on ring mode */
2573 size = ring->mtu +
2574 HEADER_ETHERNET_II_802_3_SIZE +
2575 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
2576 if (ring->rxd_mode == RXD_MODE_1)
2577 size += NET_IP_ALIGN;
2578 else
2579 size = ring->mtu + ALIGN_SIZE + BUF0_LEN + 4;
2580
2581 /* allocate skb */
2582 skb = dev_alloc_skb(size);
2583 if (!skb) {
2584 DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n",
2585 ring->dev->name);
2586 if (first_rxdp) {
2587 wmb();
2588 first_rxdp->Control_1 |= RXD_OWN_XENA;
2589 }
2590 swstats->mem_alloc_fail_cnt++;
2591
2592 return -ENOMEM ;
2593 }
2594 swstats->mem_allocated += skb->truesize;
2595
2596 if (ring->rxd_mode == RXD_MODE_1) {
2597 /* 1 buffer mode - normal operation mode */
2598 rxdp1 = (struct RxD1 *)rxdp;
2599 memset(rxdp, 0, sizeof(struct RxD1));
2600 skb_reserve(skb, NET_IP_ALIGN);
2601 rxdp1->Buffer0_ptr =
2602 pci_map_single(ring->pdev, skb->data,
2603 size - NET_IP_ALIGN,
2604 PCI_DMA_FROMDEVICE);
2605 if (pci_dma_mapping_error(nic->pdev,
2606 rxdp1->Buffer0_ptr))
2607 goto pci_map_failed;
2608
2609 rxdp->Control_2 =
2610 SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
2611 rxdp->Host_Control = (unsigned long)skb;
2612 } else if (ring->rxd_mode == RXD_MODE_3B) {
2613 /*
2614 * 2 buffer mode -
2615 * 2 buffer mode provides 128
2616 * byte aligned receive buffers.
2617 */
2618
2619 rxdp3 = (struct RxD3 *)rxdp;
2620 /* save buffer pointers to avoid frequent dma mapping */
2621 Buffer0_ptr = rxdp3->Buffer0_ptr;
2622 Buffer1_ptr = rxdp3->Buffer1_ptr;
2623 memset(rxdp, 0, sizeof(struct RxD3));
2624 /* restore the buffer pointers for dma sync*/
2625 rxdp3->Buffer0_ptr = Buffer0_ptr;
2626 rxdp3->Buffer1_ptr = Buffer1_ptr;
2627
2628 ba = &ring->ba[block_no][off];
2629 skb_reserve(skb, BUF0_LEN);
2630 tmp = (u64)(unsigned long)skb->data;
2631 tmp += ALIGN_SIZE;
2632 tmp &= ~ALIGN_SIZE;
2633 skb->data = (void *) (unsigned long)tmp;
2634 skb_reset_tail_pointer(skb);
2635
2636 if (from_card_up) {
2637 rxdp3->Buffer0_ptr =
2638 pci_map_single(ring->pdev, ba->ba_0,
2639 BUF0_LEN,
2640 PCI_DMA_FROMDEVICE);
2641 if (pci_dma_mapping_error(nic->pdev,
2642 rxdp3->Buffer0_ptr))
2643 goto pci_map_failed;
2644 } else
2645 pci_dma_sync_single_for_device(ring->pdev,
2646 (dma_addr_t)rxdp3->Buffer0_ptr,
2647 BUF0_LEN,
2648 PCI_DMA_FROMDEVICE);
2649
2650 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
2651 if (ring->rxd_mode == RXD_MODE_3B) {
2652 /* Two buffer mode */
2653
2654 /*
2655 * Buffer2 will have L3/L4 header plus
2656 * L4 payload
2657 */
2658 rxdp3->Buffer2_ptr = pci_map_single(ring->pdev,
2659 skb->data,
2660 ring->mtu + 4,
2661 PCI_DMA_FROMDEVICE);
2662
2663 if (pci_dma_mapping_error(nic->pdev,
2664 rxdp3->Buffer2_ptr))
2665 goto pci_map_failed;
2666
2667 if (from_card_up) {
2668 rxdp3->Buffer1_ptr =
2669 pci_map_single(ring->pdev,
2670 ba->ba_1,
2671 BUF1_LEN,
2672 PCI_DMA_FROMDEVICE);
2673
2674 if (pci_dma_mapping_error(nic->pdev,
2675 rxdp3->Buffer1_ptr)) {
2676 pci_unmap_single(ring->pdev,
2677 (dma_addr_t)(unsigned long)
2678 skb->data,
2679 ring->mtu + 4,
2680 PCI_DMA_FROMDEVICE);
2681 goto pci_map_failed;
2682 }
2683 }
2684 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
2685 rxdp->Control_2 |= SET_BUFFER2_SIZE_3
2686 (ring->mtu + 4);
2687 }
2688 rxdp->Control_2 |= s2BIT(0);
2689 rxdp->Host_Control = (unsigned long) (skb);
2690 }
2691 if (alloc_tab & ((1 << rxsync_frequency) - 1))
2692 rxdp->Control_1 |= RXD_OWN_XENA;
2693 off++;
2694 if (off == (ring->rxd_count + 1))
2695 off = 0;
2696 ring->rx_curr_put_info.offset = off;
2697
2698 rxdp->Control_2 |= SET_RXD_MARKER;
2699 if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
2700 if (first_rxdp) {
2701 wmb();
2702 first_rxdp->Control_1 |= RXD_OWN_XENA;
2703 }
2704 first_rxdp = rxdp;
2705 }
2706 ring->rx_bufs_left += 1;
2707 alloc_tab++;
2708 }
2709
2710 end:
2711 /* Transfer ownership of first descriptor to adapter just before
2712 * exiting. Before that, use memory barrier so that ownership
2713 * and other fields are seen by adapter correctly.
2714 */
2715 if (first_rxdp) {
2716 wmb();
2717 first_rxdp->Control_1 |= RXD_OWN_XENA;
2718 }
2719
2720 return SUCCESS;
2721
2722 pci_map_failed:
2723 swstats->pci_map_fail_cnt++;
2724 swstats->mem_freed += skb->truesize;
2725 dev_kfree_skb_irq(skb);
2726 return -ENOMEM;
2727 }
2728
2729 static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
2730 {
2731 struct net_device *dev = sp->dev;
2732 int j;
2733 struct sk_buff *skb;
2734 struct RxD_t *rxdp;
2735 struct buffAdd *ba;
2736 struct RxD1 *rxdp1;
2737 struct RxD3 *rxdp3;
2738 struct mac_info *mac_control = &sp->mac_control;
2739 struct stat_block *stats = mac_control->stats_info;
2740 struct swStat *swstats = &stats->sw_stat;
2741
2742 for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
2743 rxdp = mac_control->rings[ring_no].
2744 rx_blocks[blk].rxds[j].virt_addr;
2745 skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control);
2746 if (!skb)
2747 continue;
2748 if (sp->rxd_mode == RXD_MODE_1) {
2749 rxdp1 = (struct RxD1 *)rxdp;
2750 pci_unmap_single(sp->pdev,
2751 (dma_addr_t)rxdp1->Buffer0_ptr,
2752 dev->mtu +
2753 HEADER_ETHERNET_II_802_3_SIZE +
2754 HEADER_802_2_SIZE + HEADER_SNAP_SIZE,
2755 PCI_DMA_FROMDEVICE);
2756 memset(rxdp, 0, sizeof(struct RxD1));
2757 } else if (sp->rxd_mode == RXD_MODE_3B) {
2758 rxdp3 = (struct RxD3 *)rxdp;
2759 ba = &mac_control->rings[ring_no].ba[blk][j];
2760 pci_unmap_single(sp->pdev,
2761 (dma_addr_t)rxdp3->Buffer0_ptr,
2762 BUF0_LEN,
2763 PCI_DMA_FROMDEVICE);
2764 pci_unmap_single(sp->pdev,
2765 (dma_addr_t)rxdp3->Buffer1_ptr,
2766 BUF1_LEN,
2767 PCI_DMA_FROMDEVICE);
2768 pci_unmap_single(sp->pdev,
2769 (dma_addr_t)rxdp3->Buffer2_ptr,
2770 dev->mtu + 4,
2771 PCI_DMA_FROMDEVICE);
2772 memset(rxdp, 0, sizeof(struct RxD3));
2773 }
2774 swstats->mem_freed += skb->truesize;
2775 dev_kfree_skb(skb);
2776 mac_control->rings[ring_no].rx_bufs_left -= 1;
2777 }
2778 }
2779
2780 /**
2781 * free_rx_buffers - Frees all Rx buffers
2782 * @sp: device private variable.
2783 * Description:
2784 * This function will free all Rx buffers allocated by host.
2785 * Return Value:
2786 * NONE.
2787 */
2788
2789 static void free_rx_buffers(struct s2io_nic *sp)
2790 {
2791 struct net_device *dev = sp->dev;
2792 int i, blk = 0, buf_cnt = 0;
2793 struct config_param *config = &sp->config;
2794 struct mac_info *mac_control = &sp->mac_control;
2795
2796 for (i = 0; i < config->rx_ring_num; i++) {
2797 struct ring_info *ring = &mac_control->rings[i];
2798
2799 for (blk = 0; blk < rx_ring_sz[i]; blk++)
2800 free_rxd_blk(sp, i, blk);
2801
2802 ring->rx_curr_put_info.block_index = 0;
2803 ring->rx_curr_get_info.block_index = 0;
2804 ring->rx_curr_put_info.offset = 0;
2805 ring->rx_curr_get_info.offset = 0;
2806 ring->rx_bufs_left = 0;
2807 DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n",
2808 dev->name, buf_cnt, i);
2809 }
2810 }
2811
2812 static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
2813 {
2814 if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
2815 DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n",
2816 ring->dev->name);
2817 }
2818 return 0;
2819 }
2820
2821 /**
2822 * s2io_poll - Rx interrupt handler for NAPI support
2823 * @napi : pointer to the napi structure.
2824 * @budget : The number of packets that were budgeted to be processed
2825 * during one pass through the 'Poll" function.
2826 * Description:
2827 * Comes into picture only if NAPI support has been incorporated. It does
2828 * the same thing that rx_intr_handler does, but not in a interrupt context
2829 * also It will process only a given number of packets.
2830 * Return value:
2831 * 0 on success and 1 if there are No Rx packets to be processed.
2832 */
2833
2834 static int s2io_poll_msix(struct napi_struct *napi, int budget)
2835 {
2836 struct ring_info *ring = container_of(napi, struct ring_info, napi);
2837 struct net_device *dev = ring->dev;
2838 int pkts_processed = 0;
2839 u8 __iomem *addr = NULL;
2840 u8 val8 = 0;
2841 struct s2io_nic *nic = netdev_priv(dev);
2842 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2843 int budget_org = budget;
2844
2845 if (unlikely(!is_s2io_card_up(nic)))
2846 return 0;
2847
2848 pkts_processed = rx_intr_handler(ring, budget);
2849 s2io_chk_rx_buffers(nic, ring);
2850
2851 if (pkts_processed < budget_org) {
2852 napi_complete(napi);
2853 /*Re Enable MSI-Rx Vector*/
2854 addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
2855 addr += 7 - ring->ring_no;
2856 val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
2857 writeb(val8, addr);
2858 val8 = readb(addr);
2859 }
2860 return pkts_processed;
2861 }
2862
2863 static int s2io_poll_inta(struct napi_struct *napi, int budget)
2864 {
2865 struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
2866 int pkts_processed = 0;
2867 int ring_pkts_processed, i;
2868 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2869 int budget_org = budget;
2870 struct config_param *config = &nic->config;
2871 struct mac_info *mac_control = &nic->mac_control;
2872
2873 if (unlikely(!is_s2io_card_up(nic)))
2874 return 0;
2875
2876 for (i = 0; i < config->rx_ring_num; i++) {
2877 struct ring_info *ring = &mac_control->rings[i];
2878 ring_pkts_processed = rx_intr_handler(ring, budget);
2879 s2io_chk_rx_buffers(nic, ring);
2880 pkts_processed += ring_pkts_processed;
2881 budget -= ring_pkts_processed;
2882 if (budget <= 0)
2883 break;
2884 }
2885 if (pkts_processed < budget_org) {
2886 napi_complete(napi);
2887 /* Re enable the Rx interrupts for the ring */
2888 writeq(0, &bar0->rx_traffic_mask);
2889 readl(&bar0->rx_traffic_mask);
2890 }
2891 return pkts_processed;
2892 }
2893
2894 #ifdef CONFIG_NET_POLL_CONTROLLER
2895 /**
2896 * s2io_netpoll - netpoll event handler entry point
2897 * @dev : pointer to the device structure.
2898 * Description:
2899 * This function will be called by upper layer to check for events on the
2900 * interface in situations where interrupts are disabled. It is used for
2901 * specific in-kernel networking tasks, such as remote consoles and kernel
2902 * debugging over the network (example netdump in RedHat).
2903 */
2904 static void s2io_netpoll(struct net_device *dev)
2905 {
2906 struct s2io_nic *nic = netdev_priv(dev);
2907 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2908 u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
2909 int i;
2910 struct config_param *config = &nic->config;
2911 struct mac_info *mac_control = &nic->mac_control;
2912
2913 if (pci_channel_offline(nic->pdev))
2914 return;
2915
2916 disable_irq(dev->irq);
2917
2918 writeq(val64, &bar0->rx_traffic_int);
2919 writeq(val64, &bar0->tx_traffic_int);
2920
2921 /* we need to free up the transmitted skbufs or else netpoll will
2922 * run out of skbs and will fail and eventually netpoll application such
2923 * as netdump will fail.
2924 */
2925 for (i = 0; i < config->tx_fifo_num; i++)
2926 tx_intr_handler(&mac_control->fifos[i]);
2927
2928 /* check for received packet and indicate up to network */
2929 for (i = 0; i < config->rx_ring_num; i++) {
2930 struct ring_info *ring = &mac_control->rings[i];
2931
2932 rx_intr_handler(ring, 0);
2933 }
2934
2935 for (i = 0; i < config->rx_ring_num; i++) {
2936 struct ring_info *ring = &mac_control->rings[i];
2937
2938 if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
2939 DBG_PRINT(INFO_DBG,
2940 "%s: Out of memory in Rx Netpoll!!\n",
2941 dev->name);
2942 break;
2943 }
2944 }
2945 enable_irq(dev->irq);
2946 }
2947 #endif
2948
2949 /**
2950 * rx_intr_handler - Rx interrupt handler
2951 * @ring_info: per ring structure.
2952 * @budget: budget for napi processing.
2953 * Description:
2954 * If the interrupt is because of a received frame or if the
2955 * receive ring contains fresh as yet un-processed frames,this function is
2956 * called. It picks out the RxD at which place the last Rx processing had
2957 * stopped and sends the skb to the OSM's Rx handler and then increments
2958 * the offset.
2959 * Return Value:
2960 * No. of napi packets processed.
2961 */
2962 static int rx_intr_handler(struct ring_info *ring_data, int budget)
2963 {
2964 int get_block, put_block;
2965 struct rx_curr_get_info get_info, put_info;
2966 struct RxD_t *rxdp;
2967 struct sk_buff *skb;
2968 int pkt_cnt = 0, napi_pkts = 0;
2969 int i;
2970 struct RxD1 *rxdp1;
2971 struct RxD3 *rxdp3;
2972
2973 get_info = ring_data->rx_curr_get_info;
2974 get_block = get_info.block_index;
2975 memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
2976 put_block = put_info.block_index;
2977 rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
2978
2979 while (RXD_IS_UP2DT(rxdp)) {
2980 /*
2981 * If your are next to put index then it's
2982 * FIFO full condition
2983 */
2984 if ((get_block == put_block) &&
2985 (get_info.offset + 1) == put_info.offset) {
2986 DBG_PRINT(INTR_DBG, "%s: Ring Full\n",
2987 ring_data->dev->name);
2988 break;
2989 }
2990 skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control);
2991 if (skb == NULL) {
2992 DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",
2993 ring_data->dev->name);
2994 return 0;
2995 }
2996 if (ring_data->rxd_mode == RXD_MODE_1) {
2997 rxdp1 = (struct RxD1 *)rxdp;
2998 pci_unmap_single(ring_data->pdev, (dma_addr_t)
2999 rxdp1->Buffer0_ptr,
3000 ring_data->mtu +
3001 HEADER_ETHERNET_II_802_3_SIZE +
3002 HEADER_802_2_SIZE +
3003 HEADER_SNAP_SIZE,
3004 PCI_DMA_FROMDEVICE);
3005 } else if (ring_data->rxd_mode == RXD_MODE_3B) {
3006 rxdp3 = (struct RxD3 *)rxdp;
3007 pci_dma_sync_single_for_cpu(ring_data->pdev,
3008 (dma_addr_t)rxdp3->Buffer0_ptr,
3009 BUF0_LEN,
3010 PCI_DMA_FROMDEVICE);
3011 pci_unmap_single(ring_data->pdev,
3012 (dma_addr_t)rxdp3->Buffer2_ptr,
3013 ring_data->mtu + 4,
3014 PCI_DMA_FROMDEVICE);
3015 }
3016 prefetch(skb->data);
3017 rx_osm_handler(ring_data, rxdp);
3018 get_info.offset++;
3019 ring_data->rx_curr_get_info.offset = get_info.offset;
3020 rxdp = ring_data->rx_blocks[get_block].
3021 rxds[get_info.offset].virt_addr;
3022 if (get_info.offset == rxd_count[ring_data->rxd_mode]) {
3023 get_info.offset = 0;
3024 ring_data->rx_curr_get_info.offset = get_info.offset;
3025 get_block++;
3026 if (get_block == ring_data->block_count)
3027 get_block = 0;
3028 ring_data->rx_curr_get_info.block_index = get_block;
3029 rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
3030 }
3031
3032 if (ring_data->nic->config.napi) {
3033 budget--;
3034 napi_pkts++;
3035 if (!budget)
3036 break;
3037 }
3038 pkt_cnt++;
3039 if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
3040 break;
3041 }
3042 if (ring_data->lro) {
3043 /* Clear all LRO sessions before exiting */
3044 for (i = 0; i < MAX_LRO_SESSIONS; i++) {
3045 struct lro *lro = &ring_data->lro0_n[i];
3046 if (lro->in_use) {
3047 update_L3L4_header(ring_data->nic, lro);
3048 queue_rx_frame(lro->parent, lro->vlan_tag);
3049 clear_lro_session(lro);
3050 }
3051 }
3052 }
3053 return napi_pkts;
3054 }
3055
3056 /**
3057 * tx_intr_handler - Transmit interrupt handler
3058 * @nic : device private variable
3059 * Description:
3060 * If an interrupt was raised to indicate DMA complete of the
3061 * Tx packet, this function is called. It identifies the last TxD
3062 * whose buffer was freed and frees all skbs whose data have already
3063 * DMA'ed into the NICs internal memory.
3064 * Return Value:
3065 * NONE
3066 */
3067
3068 static void tx_intr_handler(struct fifo_info *fifo_data)
3069 {
3070 struct s2io_nic *nic = fifo_data->nic;
3071 struct tx_curr_get_info get_info, put_info;
3072 struct sk_buff *skb = NULL;
3073 struct TxD *txdlp;
3074 int pkt_cnt = 0;
3075 unsigned long flags = 0;
3076 u8 err_mask;
3077 struct stat_block *stats = nic->mac_control.stats_info;
3078 struct swStat *swstats = &stats->sw_stat;
3079
3080 if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags))
3081 return;
3082
3083 get_info = fifo_data->tx_curr_get_info;
3084 memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
3085 txdlp = (struct TxD *)
3086 fifo_data->list_info[get_info.offset].list_virt_addr;
3087 while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
3088 (get_info.offset != put_info.offset) &&
3089 (txdlp->Host_Control)) {
3090 /* Check for TxD errors */
3091 if (txdlp->Control_1 & TXD_T_CODE) {
3092 unsigned long long err;
3093 err = txdlp->Control_1 & TXD_T_CODE;
3094 if (err & 0x1) {
3095 swstats->parity_err_cnt++;
3096 }
3097
3098 /* update t_code statistics */
3099 err_mask = err >> 48;
3100 switch (err_mask) {
3101 case 2:
3102 swstats->tx_buf_abort_cnt++;
3103 break;
3104
3105 case 3:
3106 swstats->tx_desc_abort_cnt++;
3107 break;
3108
3109 case 7:
3110 swstats->tx_parity_err_cnt++;
3111 break;
3112
3113 case 10:
3114 swstats->tx_link_loss_cnt++;
3115 break;
3116
3117 case 15:
3118 swstats->tx_list_proc_err_cnt++;
3119 break;
3120 }
3121 }
3122
3123 skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
3124 if (skb == NULL) {
3125 spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3126 DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",
3127 __func__);
3128 return;
3129 }
3130 pkt_cnt++;
3131
3132 /* Updating the statistics block */
3133 nic->dev->stats.tx_bytes += skb->len;
3134 swstats->mem_freed += skb->truesize;
3135 dev_kfree_skb_irq(skb);
3136
3137 get_info.offset++;
3138 if (get_info.offset == get_info.fifo_len + 1)
3139 get_info.offset = 0;
3140 txdlp = (struct TxD *)
3141 fifo_data->list_info[get_info.offset].list_virt_addr;
3142 fifo_data->tx_curr_get_info.offset = get_info.offset;
3143 }
3144
3145 s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq);
3146
3147 spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3148 }
3149
3150 /**
3151 * s2io_mdio_write - Function to write in to MDIO registers
3152 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3153 * @addr : address value
3154 * @value : data value
3155 * @dev : pointer to net_device structure
3156 * Description:
3157 * This function is used to write values to the MDIO registers
3158 * NONE
3159 */
3160 static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value,
3161 struct net_device *dev)
3162 {
3163 u64 val64;
3164 struct s2io_nic *sp = netdev_priv(dev);
3165 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3166
3167 /* address transaction */
3168 val64 = MDIO_MMD_INDX_ADDR(addr) |
3169 MDIO_MMD_DEV_ADDR(mmd_type) |
3170 MDIO_MMS_PRT_ADDR(0x0);
3171 writeq(val64, &bar0->mdio_control);
3172 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3173 writeq(val64, &bar0->mdio_control);
3174 udelay(100);
3175
3176 /* Data transaction */
3177 val64 = MDIO_MMD_INDX_ADDR(addr) |
3178 MDIO_MMD_DEV_ADDR(mmd_type) |
3179 MDIO_MMS_PRT_ADDR(0x0) |
3180 MDIO_MDIO_DATA(value) |
3181 MDIO_OP(MDIO_OP_WRITE_TRANS);
3182 writeq(val64, &bar0->mdio_control);
3183 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3184 writeq(val64, &bar0->mdio_control);
3185 udelay(100);
3186
3187 val64 = MDIO_MMD_INDX_ADDR(addr) |
3188 MDIO_MMD_DEV_ADDR(mmd_type) |
3189 MDIO_MMS_PRT_ADDR(0x0) |
3190 MDIO_OP(MDIO_OP_READ_TRANS);
3191 writeq(val64, &bar0->mdio_control);
3192 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3193 writeq(val64, &bar0->mdio_control);
3194 udelay(100);
3195 }
3196
3197 /**
3198 * s2io_mdio_read - Function to write in to MDIO registers
3199 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3200 * @addr : address value
3201 * @dev : pointer to net_device structure
3202 * Description:
3203 * This function is used to read values to the MDIO registers
3204 * NONE
3205 */
3206 static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
3207 {
3208 u64 val64 = 0x0;
3209 u64 rval64 = 0x0;
3210 struct s2io_nic *sp = netdev_priv(dev);
3211 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3212
3213 /* address transaction */
3214 val64 = val64 | (MDIO_MMD_INDX_ADDR(addr)
3215 | MDIO_MMD_DEV_ADDR(mmd_type)
3216 | MDIO_MMS_PRT_ADDR(0x0));
3217 writeq(val64, &bar0->mdio_control);
3218 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3219 writeq(val64, &bar0->mdio_control);
3220 udelay(100);
3221
3222 /* Data transaction */
3223 val64 = MDIO_MMD_INDX_ADDR(addr) |
3224 MDIO_MMD_DEV_ADDR(mmd_type) |
3225 MDIO_MMS_PRT_ADDR(0x0) |
3226 MDIO_OP(MDIO_OP_READ_TRANS);
3227 writeq(val64, &bar0->mdio_control);
3228 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3229 writeq(val64, &bar0->mdio_control);
3230 udelay(100);
3231
3232 /* Read the value from regs */
3233 rval64 = readq(&bar0->mdio_control);
3234 rval64 = rval64 & 0xFFFF0000;
3235 rval64 = rval64 >> 16;
3236 return rval64;
3237 }
3238
3239 /**
3240 * s2io_chk_xpak_counter - Function to check the status of the xpak counters
3241 * @counter : counter value to be updated
3242 * @flag : flag to indicate the status
3243 * @type : counter type
3244 * Description:
3245 * This function is to check the status of the xpak counters value
3246 * NONE
3247 */
3248
3249 static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index,
3250 u16 flag, u16 type)
3251 {
3252 u64 mask = 0x3;
3253 u64 val64;
3254 int i;
3255 for (i = 0; i < index; i++)
3256 mask = mask << 0x2;
3257
3258 if (flag > 0) {
3259 *counter = *counter + 1;
3260 val64 = *regs_stat & mask;
3261 val64 = val64 >> (index * 0x2);
3262 val64 = val64 + 1;
3263 if (val64 == 3) {
3264 switch (type) {
3265 case 1:
3266 DBG_PRINT(ERR_DBG,
3267 "Take Xframe NIC out of service.\n");
3268 DBG_PRINT(ERR_DBG,
3269 "Excessive temperatures may result in premature transceiver failure.\n");
3270 break;
3271 case 2:
3272 DBG_PRINT(ERR_DBG,
3273 "Take Xframe NIC out of service.\n");
3274 DBG_PRINT(ERR_DBG,
3275 "Excessive bias currents may indicate imminent laser diode failure.\n");
3276 break;
3277 case 3:
3278 DBG_PRINT(ERR_DBG,
3279 "Take Xframe NIC out of service.\n");
3280 DBG_PRINT(ERR_DBG,
3281 "Excessive laser output power may saturate far-end receiver.\n");
3282 break;
3283 default:
3284 DBG_PRINT(ERR_DBG,
3285 "Incorrect XPAK Alarm type\n");
3286 }
3287 val64 = 0x0;
3288 }
3289 val64 = val64 << (index * 0x2);
3290 *regs_stat = (*regs_stat & (~mask)) | (val64);
3291
3292 } else {
3293 *regs_stat = *regs_stat & (~mask);
3294 }
3295 }
3296
3297 /**
3298 * s2io_updt_xpak_counter - Function to update the xpak counters
3299 * @dev : pointer to net_device struct
3300 * Description:
3301 * This function is to upate the status of the xpak counters value
3302 * NONE
3303 */
3304 static void s2io_updt_xpak_counter(struct net_device *dev)
3305 {
3306 u16 flag = 0x0;
3307 u16 type = 0x0;
3308 u16 val16 = 0x0;
3309 u64 val64 = 0x0;
3310 u64 addr = 0x0;
3311
3312 struct s2io_nic *sp = netdev_priv(dev);
3313 struct stat_block *stats = sp->mac_control.stats_info;
3314 struct xpakStat *xstats = &stats->xpak_stat;
3315
3316 /* Check the communication with the MDIO slave */
3317 addr = MDIO_CTRL1;
3318 val64 = 0x0;
3319 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
3320 if ((val64 == 0xFFFF) || (val64 == 0x0000)) {
3321 DBG_PRINT(ERR_DBG,
3322 "ERR: MDIO slave access failed - Returned %llx\n",
3323 (unsigned long long)val64);
3324 return;
3325 }
3326
3327 /* Check for the expected value of control reg 1 */
3328 if (val64 != MDIO_CTRL1_SPEED10G) {
3329 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "
3330 "Returned: %llx- Expected: 0x%x\n",
3331 (unsigned long long)val64, MDIO_CTRL1_SPEED10G);
3332 return;
3333 }
3334
3335 /* Loading the DOM register to MDIO register */
3336 addr = 0xA100;
3337 s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev);
3338 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
3339
3340 /* Reading the Alarm flags */
3341 addr = 0xA070;
3342 val64 = 0x0;
3343 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
3344
3345 flag = CHECKBIT(val64, 0x7);
3346 type = 1;
3347 s2io_chk_xpak_counter(&xstats->alarm_transceiver_temp_high,
3348 &xstats->xpak_regs_stat,
3349 0x0, flag, type);
3350
3351 if (CHECKBIT(val64, 0x6))
3352 xstats->alarm_transceiver_temp_low++;
3353
3354 flag = CHECKBIT(val64, 0x3);
3355 type = 2;
3356 s2io_chk_xpak_counter(&xstats->alarm_laser_bias_current_high,
3357 &xstats->xpak_regs_stat,
3358 0x2, flag, type);
3359
3360 if (CHECKBIT(val64, 0x2))
3361 xstats->alarm_laser_bias_current_low++;
3362
3363 flag = CHECKBIT(val64, 0x1);
3364 type = 3;
3365 s2io_chk_xpak_counter(&xstats->alarm_laser_output_power_high,
3366 &xstats->xpak_regs_stat,
3367 0x4, flag, type);
3368
3369 if (CHECKBIT(val64, 0x0))
3370 xstats->alarm_laser_output_power_low++;
3371
3372 /* Reading the Warning flags */
3373 addr = 0xA074;
3374 val64 = 0x0;
3375 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
3376
3377 if (CHECKBIT(val64, 0x7))
3378 xstats->warn_transceiver_temp_high++;
3379
3380 if (CHECKBIT(val64, 0x6))
3381 xstats->warn_transceiver_temp_low++;
3382
3383 if (CHECKBIT(val64, 0x3))
3384 xstats->warn_laser_bias_current_high++;
3385
3386 if (CHECKBIT(val64, 0x2))
3387 xstats->warn_laser_bias_current_low++;
3388
3389 if (CHECKBIT(val64, 0x1))
3390 xstats->warn_laser_output_power_high++;
3391
3392 if (CHECKBIT(val64, 0x0))
3393 xstats->warn_laser_output_power_low++;
3394 }
3395
3396 /**
3397 * wait_for_cmd_complete - waits for a command to complete.
3398 * @sp : private member of the device structure, which is a pointer to the
3399 * s2io_nic structure.
3400 * Description: Function that waits for a command to Write into RMAC
3401 * ADDR DATA registers to be completed and returns either success or
3402 * error depending on whether the command was complete or not.
3403 * Return value:
3404 * SUCCESS on success and FAILURE on failure.
3405 */
3406
3407 static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
3408 int bit_state)
3409 {
3410 int ret = FAILURE, cnt = 0, delay = 1;
3411 u64 val64;
3412
3413 if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET))
3414 return FAILURE;
3415
3416 do {
3417 val64 = readq(addr);
3418 if (bit_state == S2IO_BIT_RESET) {
3419 if (!(val64 & busy_bit)) {
3420 ret = SUCCESS;
3421 break;
3422 }
3423 } else {
3424 if (val64 & busy_bit) {
3425 ret = SUCCESS;
3426 break;
3427 }
3428 }
3429
3430 if (in_interrupt())
3431 mdelay(delay);
3432 else
3433 msleep(delay);
3434
3435 if (++cnt >= 10)
3436 delay = 50;
3437 } while (cnt < 20);
3438 return ret;
3439 }
3440 /*
3441 * check_pci_device_id - Checks if the device id is supported
3442 * @id : device id
3443 * Description: Function to check if the pci device id is supported by driver.
3444 * Return value: Actual device id if supported else PCI_ANY_ID
3445 */
3446 static u16 check_pci_device_id(u16 id)
3447 {
3448 switch (id) {
3449 case PCI_DEVICE_ID_HERC_WIN:
3450 case PCI_DEVICE_ID_HERC_UNI:
3451 return XFRAME_II_DEVICE;
3452 case PCI_DEVICE_ID_S2IO_UNI:
3453 case PCI_DEVICE_ID_S2IO_WIN:
3454 return XFRAME_I_DEVICE;
3455 default:
3456 return PCI_ANY_ID;
3457 }
3458 }
3459
3460 /**
3461 * s2io_reset - Resets the card.
3462 * @sp : private member of the device structure.
3463 * Description: Function to Reset the card. This function then also
3464 * restores the previously saved PCI configuration space registers as
3465 * the card reset also resets the configuration space.
3466 * Return value:
3467 * void.
3468 */
3469
3470 static void s2io_reset(struct s2io_nic *sp)
3471 {
3472 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3473 u64 val64;
3474 u16 subid, pci_cmd;
3475 int i;
3476 u16 val16;
3477 unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
3478 unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
3479 struct stat_block *stats;
3480 struct swStat *swstats;
3481
3482 DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
3483 __func__, pci_name(sp->pdev));
3484
3485 /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
3486 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
3487
3488 val64 = SW_RESET_ALL;
3489 writeq(val64, &bar0->sw_reset);
3490 if (strstr(sp->product_name, "CX4"))
3491 msleep(750);
3492 msleep(250);
3493 for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
3494
3495 /* Restore the PCI state saved during initialization. */
3496 pci_restore_state(sp->pdev);
3497 pci_save_state(sp->pdev);
3498 pci_read_config_word(sp->pdev, 0x2, &val16);
3499 if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
3500 break;
3501 msleep(200);
3502 }
3503
3504 if (check_pci_device_id(val16) == (u16)PCI_ANY_ID)
3505 DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);
3506
3507 pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
3508
3509 s2io_init_pci(sp);
3510
3511 /* Set swapper to enable I/O register access */
3512 s2io_set_swapper(sp);
3513
3514 /* restore mac_addr entries */
3515 do_s2io_restore_unicast_mc(sp);
3516
3517 /* Restore the MSIX table entries from local variables */
3518 restore_xmsi_data(sp);
3519
3520 /* Clear certain PCI/PCI-X fields after reset */
3521 if (sp->device_type == XFRAME_II_DEVICE) {
3522 /* Clear "detected parity error" bit */
3523 pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
3524
3525 /* Clearing PCIX Ecc status register */
3526 pci_write_config_dword(sp->pdev, 0x68, 0x7C);
3527
3528 /* Clearing PCI_STATUS error reflected here */
3529 writeq(s2BIT(62), &bar0->txpic_int_reg);
3530 }
3531
3532 /* Reset device statistics maintained by OS */
3533 memset(&sp->stats, 0, sizeof(struct net_device_stats));
3534
3535 stats = sp->mac_control.stats_info;
3536 swstats = &stats->sw_stat;
3537
3538 /* save link up/down time/cnt, reset/memory/watchdog cnt */
3539 up_cnt = swstats->link_up_cnt;
3540 down_cnt = swstats->link_down_cnt;
3541 up_time = swstats->link_up_time;
3542 down_time = swstats->link_down_time;
3543 reset_cnt = swstats->soft_reset_cnt;
3544 mem_alloc_cnt = swstats->mem_allocated;
3545 mem_free_cnt = swstats->mem_freed;
3546 watchdog_cnt = swstats->watchdog_timer_cnt;
3547
3548 memset(stats, 0, sizeof(struct stat_block));
3549
3550 /* restore link up/down time/cnt, reset/memory/watchdog cnt */
3551 swstats->link_up_cnt = up_cnt;
3552 swstats->link_down_cnt = down_cnt;
3553 swstats->link_up_time = up_time;
3554 swstats->link_down_time = down_time;
3555 swstats->soft_reset_cnt = reset_cnt;
3556 swstats->mem_allocated = mem_alloc_cnt;
3557 swstats->mem_freed = mem_free_cnt;
3558 swstats->watchdog_timer_cnt = watchdog_cnt;
3559
3560 /* SXE-002: Configure link and activity LED to turn it off */
3561 subid = sp->pdev->subsystem_device;
3562 if (((subid & 0xFF) >= 0x07) &&
3563 (sp->device_type == XFRAME_I_DEVICE)) {
3564 val64 = readq(&bar0->gpio_control);
3565 val64 |= 0x0000800000000000ULL;
3566 writeq(val64, &bar0->gpio_control);
3567 val64 = 0x0411040400000000ULL;
3568 writeq(val64, (void __iomem *)bar0 + 0x2700);
3569 }
3570
3571 /*
3572 * Clear spurious ECC interrupts that would have occured on
3573 * XFRAME II cards after reset.
3574 */
3575 if (sp->device_type == XFRAME_II_DEVICE) {
3576 val64 = readq(&bar0->pcc_err_reg);
3577 writeq(val64, &bar0->pcc_err_reg);
3578 }
3579
3580 sp->device_enabled_once = false;
3581 }
3582
3583 /**
3584 * s2io_set_swapper - to set the swapper controle on the card
3585 * @sp : private member of the device structure,
3586 * pointer to the s2io_nic structure.
3587 * Description: Function to set the swapper control on the card
3588 * correctly depending on the 'endianness' of the system.
3589 * Return value:
3590 * SUCCESS on success and FAILURE on failure.
3591 */
3592
3593 static int s2io_set_swapper(struct s2io_nic *sp)
3594 {
3595 struct net_device *dev = sp->dev;
3596 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3597 u64 val64, valt, valr;
3598
3599 /*
3600 * Set proper endian settings and verify the same by reading
3601 * the PIF Feed-back register.
3602 */
3603
3604 val64 = readq(&bar0->pif_rd_swapper_fb);
3605 if (val64 != 0x0123456789ABCDEFULL) {
3606 int i = 0;
3607 u64 value[] = { 0xC30000C3C30000C3ULL, /* FE=1, SE=1 */
3608 0x8100008181000081ULL, /* FE=1, SE=0 */
3609 0x4200004242000042ULL, /* FE=0, SE=1 */
3610 0}; /* FE=0, SE=0 */
3611
3612 while (i < 4) {
3613 writeq(value[i], &bar0->swapper_ctrl);
3614 val64 = readq(&bar0->pif_rd_swapper_fb);
3615 if (val64 == 0x0123456789ABCDEFULL)
3616 break;
3617 i++;
3618 }
3619 if (i == 4) {
3620 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "
3621 "feedback read %llx\n",
3622 dev->name, (unsigned long long)val64);
3623 return FAILURE;
3624 }
3625 valr = value[i];
3626 } else {
3627 valr = readq(&bar0->swapper_ctrl);
3628 }
3629
3630 valt = 0x0123456789ABCDEFULL;
3631 writeq(valt, &bar0->xmsi_address);
3632 val64 = readq(&bar0->xmsi_address);
3633
3634 if (val64 != valt) {
3635 int i = 0;
3636 u64 value[] = { 0x00C3C30000C3C300ULL, /* FE=1, SE=1 */
3637 0x0081810000818100ULL, /* FE=1, SE=0 */
3638 0x0042420000424200ULL, /* FE=0, SE=1 */
3639 0}; /* FE=0, SE=0 */
3640
3641 while (i < 4) {
3642 writeq((value[i] | valr), &bar0->swapper_ctrl);
3643 writeq(valt, &bar0->xmsi_address);
3644 val64 = readq(&bar0->xmsi_address);
3645 if (val64 == valt)
3646 break;
3647 i++;
3648 }
3649 if (i == 4) {
3650 unsigned long long x = val64;
3651 DBG_PRINT(ERR_DBG,
3652 "Write failed, Xmsi_addr reads:0x%llx\n", x);
3653 return FAILURE;
3654 }
3655 }
3656 val64 = readq(&bar0->swapper_ctrl);
3657 val64 &= 0xFFFF000000000000ULL;
3658
3659 #ifdef __BIG_ENDIAN
3660 /*
3661 * The device by default set to a big endian format, so a
3662 * big endian driver need not set anything.
3663 */
3664 val64 |= (SWAPPER_CTRL_TXP_FE |
3665 SWAPPER_CTRL_TXP_SE |
3666 SWAPPER_CTRL_TXD_R_FE |
3667 SWAPPER_CTRL_TXD_W_FE |
3668 SWAPPER_CTRL_TXF_R_FE |
3669 SWAPPER_CTRL_RXD_R_FE |
3670 SWAPPER_CTRL_RXD_W_FE |
3671 SWAPPER_CTRL_RXF_W_FE |
3672 SWAPPER_CTRL_XMSI_FE |
3673 SWAPPER_CTRL_STATS_FE |
3674 SWAPPER_CTRL_STATS_SE);
3675 if (sp->config.intr_type == INTA)
3676 val64 |= SWAPPER_CTRL_XMSI_SE;
3677 writeq(val64, &bar0->swapper_ctrl);
3678 #else
3679 /*
3680 * Initially we enable all bits to make it accessible by the
3681 * driver, then we selectively enable only those bits that
3682 * we want to set.
3683 */
3684 val64 |= (SWAPPER_CTRL_TXP_FE |
3685 SWAPPER_CTRL_TXP_SE |
3686 SWAPPER_CTRL_TXD_R_FE |
3687 SWAPPER_CTRL_TXD_R_SE |
3688 SWAPPER_CTRL_TXD_W_FE |
3689 SWAPPER_CTRL_TXD_W_SE |
3690 SWAPPER_CTRL_TXF_R_FE |
3691 SWAPPER_CTRL_RXD_R_FE |
3692 SWAPPER_CTRL_RXD_R_SE |
3693 SWAPPER_CTRL_RXD_W_FE |
3694 SWAPPER_CTRL_RXD_W_SE |
3695 SWAPPER_CTRL_RXF_W_FE |
3696 SWAPPER_CTRL_XMSI_FE |
3697 SWAPPER_CTRL_STATS_FE |
3698 SWAPPER_CTRL_STATS_SE);
3699 if (sp->config.intr_type == INTA)
3700 val64 |= SWAPPER_CTRL_XMSI_SE;
3701 writeq(val64, &bar0->swapper_ctrl);
3702 #endif
3703 val64 = readq(&bar0->swapper_ctrl);
3704
3705 /*
3706 * Verifying if endian settings are accurate by reading a
3707 * feedback register.
3708 */
3709 val64 = readq(&bar0->pif_rd_swapper_fb);
3710 if (val64 != 0x0123456789ABCDEFULL) {
3711 /* Endian settings are incorrect, calls for another dekko. */
3712 DBG_PRINT(ERR_DBG,
3713 "%s: Endian settings are wrong, feedback read %llx\n",
3714 dev->name, (unsigned long long)val64);
3715 return FAILURE;
3716 }
3717
3718 return SUCCESS;
3719 }
3720
3721 static int wait_for_msix_trans(struct s2io_nic *nic, int i)
3722 {
3723 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3724 u64 val64;
3725 int ret = 0, cnt = 0;
3726
3727 do {
3728 val64 = readq(&bar0->xmsi_access);
3729 if (!(val64 & s2BIT(15)))
3730 break;
3731 mdelay(1);
3732 cnt++;
3733 } while (cnt < 5);
3734 if (cnt == 5) {
3735 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
3736 ret = 1;
3737 }
3738
3739 return ret;
3740 }
3741
3742 static void restore_xmsi_data(struct s2io_nic *nic)
3743 {
3744 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3745 u64 val64;
3746 int i, msix_index;
3747
3748 if (nic->device_type == XFRAME_I_DEVICE)
3749 return;
3750
3751 for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
3752 msix_index = (i) ? ((i-1) * 8 + 1) : 0;
3753 writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
3754 writeq(nic->msix_info[i].data, &bar0->xmsi_data);
3755 val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
3756 writeq(val64, &bar0->xmsi_access);
3757 if (wait_for_msix_trans(nic, msix_index)) {
3758 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
3759 __func__, msix_index);
3760 continue;
3761 }
3762 }
3763 }
3764
3765 static void store_xmsi_data(struct s2io_nic *nic)
3766 {
3767 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3768 u64 val64, addr, data;
3769 int i, msix_index;
3770
3771 if (nic->device_type == XFRAME_I_DEVICE)
3772 return;
3773
3774 /* Store and display */
3775 for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
3776 msix_index = (i) ? ((i-1) * 8 + 1) : 0;
3777 val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
3778 writeq(val64, &bar0->xmsi_access);
3779 if (wait_for_msix_trans(nic, msix_index)) {
3780 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
3781 __func__, msix_index);
3782 continue;
3783 }
3784 addr = readq(&bar0->xmsi_address);
3785 data = readq(&bar0->xmsi_data);
3786 if (addr && data) {
3787 nic->msix_info[i].addr = addr;
3788 nic->msix_info[i].data = data;
3789 }
3790 }
3791 }
3792
3793 static int s2io_enable_msi_x(struct s2io_nic *nic)
3794 {
3795 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3796 u64 rx_mat;
3797 u16 msi_control; /* Temp variable */
3798 int ret, i, j, msix_indx = 1;
3799 int size;
3800 struct stat_block *stats = nic->mac_control.stats_info;
3801 struct swStat *swstats = &stats->sw_stat;
3802
3803 size = nic->num_entries * sizeof(struct msix_entry);
3804 nic->entries = kzalloc(size, GFP_KERNEL);
3805 if (!nic->entries) {
3806 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3807 __func__);
3808 swstats->mem_alloc_fail_cnt++;
3809 return -ENOMEM;
3810 }
3811 swstats->mem_allocated += size;
3812
3813 size = nic->num_entries * sizeof(struct s2io_msix_entry);
3814 nic->s2io_entries = kzalloc(size, GFP_KERNEL);
3815 if (!nic->s2io_entries) {
3816 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3817 __func__);
3818 swstats->mem_alloc_fail_cnt++;
3819 kfree(nic->entries);
3820 swstats->mem_freed
3821 += (nic->num_entries * sizeof(struct msix_entry));
3822 return -ENOMEM;
3823 }
3824 swstats->mem_allocated += size;
3825
3826 nic->entries[0].entry = 0;
3827 nic->s2io_entries[0].entry = 0;
3828 nic->s2io_entries[0].in_use = MSIX_FLG;
3829 nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
3830 nic->s2io_entries[0].arg = &nic->mac_control.fifos;
3831
3832 for (i = 1; i < nic->num_entries; i++) {
3833 nic->entries[i].entry = ((i - 1) * 8) + 1;
3834 nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
3835 nic->s2io_entries[i].arg = NULL;
3836 nic->s2io_entries[i].in_use = 0;
3837 }
3838
3839 rx_mat = readq(&bar0->rx_mat);
3840 for (j = 0; j < nic->config.rx_ring_num; j++) {
3841 rx_mat |= RX_MAT_SET(j, msix_indx);
3842 nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
3843 nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
3844 nic->s2io_entries[j+1].in_use = MSIX_FLG;
3845 msix_indx += 8;
3846 }
3847 writeq(rx_mat, &bar0->rx_mat);
3848 readq(&bar0->rx_mat);
3849
3850 ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
3851 /* We fail init if error or we get less vectors than min required */
3852 if (ret) {
3853 DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");
3854 kfree(nic->entries);
3855 swstats->mem_freed += nic->num_entries *
3856 sizeof(struct msix_entry);
3857 kfree(nic->s2io_entries);
3858 swstats->mem_freed += nic->num_entries *
3859 sizeof(struct s2io_msix_entry);
3860 nic->entries = NULL;
3861 nic->s2io_entries = NULL;
3862 return -ENOMEM;
3863 }
3864
3865 /*
3866 * To enable MSI-X, MSI also needs to be enabled, due to a bug
3867 * in the herc NIC. (Temp change, needs to be removed later)
3868 */
3869 pci_read_config_word(nic->pdev, 0x42, &msi_control);
3870 msi_control |= 0x1; /* Enable MSI */
3871 pci_write_config_word(nic->pdev, 0x42, msi_control);
3872
3873 return 0;
3874 }
3875
3876 /* Handle software interrupt used during MSI(X) test */
3877 static irqreturn_t s2io_test_intr(int irq, void *dev_id)
3878 {
3879 struct s2io_nic *sp = dev_id;
3880
3881 sp->msi_detected = 1;
3882 wake_up(&sp->msi_wait);
3883
3884 return IRQ_HANDLED;
3885 }
3886
3887 /* Test interrupt path by forcing a a software IRQ */
3888 static int s2io_test_msi(struct s2io_nic *sp)
3889 {
3890 struct pci_dev *pdev = sp->pdev;
3891 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3892 int err;
3893 u64 val64, saved64;
3894
3895 err = request_irq(sp->entries[1].vector, s2io_test_intr, 0,
3896 sp->name, sp);
3897 if (err) {
3898 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
3899 sp->dev->name, pci_name(pdev), pdev->irq);
3900 return err;
3901 }
3902
3903 init_waitqueue_head(&sp->msi_wait);
3904 sp->msi_detected = 0;
3905
3906 saved64 = val64 = readq(&bar0->scheduled_int_ctrl);
3907 val64 |= SCHED_INT_CTRL_ONE_SHOT;
3908 val64 |= SCHED_INT_CTRL_TIMER_EN;
3909 val64 |= SCHED_INT_CTRL_INT2MSI(1);
3910 writeq(val64, &bar0->scheduled_int_ctrl);
3911
3912 wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10);
3913
3914 if (!sp->msi_detected) {
3915 /* MSI(X) test failed, go back to INTx mode */
3916 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
3917 "using MSI(X) during test\n",
3918 sp->dev->name, pci_name(pdev));
3919
3920 err = -EOPNOTSUPP;
3921 }
3922
3923 free_irq(sp->entries[1].vector, sp);
3924
3925 writeq(saved64, &bar0->scheduled_int_ctrl);
3926
3927 return err;
3928 }
3929
3930 static void remove_msix_isr(struct s2io_nic *sp)
3931 {
3932 int i;
3933 u16 msi_control;
3934
3935 for (i = 0; i < sp->num_entries; i++) {
3936 if (sp->s2io_entries[i].in_use == MSIX_REGISTERED_SUCCESS) {
3937 int vector = sp->entries[i].vector;
3938 void *arg = sp->s2io_entries[i].arg;
3939 free_irq(vector, arg);
3940 }
3941 }
3942
3943 kfree(sp->entries);
3944 kfree(sp->s2io_entries);
3945 sp->entries = NULL;
3946 sp->s2io_entries = NULL;
3947
3948 pci_read_config_word(sp->pdev, 0x42, &msi_control);
3949 msi_control &= 0xFFFE; /* Disable MSI */
3950 pci_write_config_word(sp->pdev, 0x42, msi_control);
3951
3952 pci_disable_msix(sp->pdev);
3953 }
3954
3955 static void remove_inta_isr(struct s2io_nic *sp)
3956 {
3957 struct net_device *dev = sp->dev;
3958
3959 free_irq(sp->pdev->irq, dev);
3960 }
3961
3962 /* ********************************************************* *
3963 * Functions defined below concern the OS part of the driver *
3964 * ********************************************************* */
3965
3966 /**
3967 * s2io_open - open entry point of the driver
3968 * @dev : pointer to the device structure.
3969 * Description:
3970 * This function is the open entry point of the driver. It mainly calls a
3971 * function to allocate Rx buffers and inserts them into the buffer
3972 * descriptors and then enables the Rx part of the NIC.
3973 * Return value:
3974 * 0 on success and an appropriate (-)ve integer as defined in errno.h
3975 * file on failure.
3976 */
3977
3978 static int s2io_open(struct net_device *dev)
3979 {
3980 struct s2io_nic *sp = netdev_priv(dev);
3981 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
3982 int err = 0;
3983
3984 /*
3985 * Make sure you have link off by default every time
3986 * Nic is initialized
3987 */
3988 netif_carrier_off(dev);
3989 sp->last_link_state = 0;
3990
3991 /* Initialize H/W and enable interrupts */
3992 err = s2io_card_up(sp);
3993 if (err) {
3994 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
3995 dev->name);
3996 goto hw_init_failed;
3997 }
3998
3999 if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) {
4000 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
4001 s2io_card_down(sp);
4002 err = -ENODEV;
4003 goto hw_init_failed;
4004 }
4005 s2io_start_all_tx_queue(sp);
4006 return 0;
4007
4008 hw_init_failed:
4009 if (sp->config.intr_type == MSI_X) {
4010 if (sp->entries) {
4011 kfree(sp->entries);
4012 swstats->mem_freed += sp->num_entries *
4013 sizeof(struct msix_entry);
4014 }
4015 if (sp->s2io_entries) {
4016 kfree(sp->s2io_entries);
4017 swstats->mem_freed += sp->num_entries *
4018 sizeof(struct s2io_msix_entry);
4019 }
4020 }
4021 return err;
4022 }
4023
4024 /**
4025 * s2io_close -close entry point of the driver
4026 * @dev : device pointer.
4027 * Description:
4028 * This is the stop entry point of the driver. It needs to undo exactly
4029 * whatever was done by the open entry point,thus it's usually referred to
4030 * as the close function.Among other things this function mainly stops the
4031 * Rx side of the NIC and frees all the Rx buffers in the Rx rings.
4032 * Return value:
4033 * 0 on success and an appropriate (-)ve integer as defined in errno.h
4034 * file on failure.
4035 */
4036
4037 static int s2io_close(struct net_device *dev)
4038 {
4039 struct s2io_nic *sp = netdev_priv(dev);
4040 struct config_param *config = &sp->config;
4041 u64 tmp64;
4042 int offset;
4043
4044 /* Return if the device is already closed *
4045 * Can happen when s2io_card_up failed in change_mtu *
4046 */
4047 if (!is_s2io_card_up(sp))
4048 return 0;
4049
4050 s2io_stop_all_tx_queue(sp);
4051 /* delete all populated mac entries */
4052 for (offset = 1; offset < config->max_mc_addr; offset++) {
4053 tmp64 = do_s2io_read_unicast_mc(sp, offset);
4054 if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
4055 do_s2io_delete_unicast_mc(sp, tmp64);
4056 }
4057
4058 s2io_card_down(sp);
4059
4060 return 0;
4061 }
4062
4063 /**
4064 * s2io_xmit - Tx entry point of te driver
4065 * @skb : the socket buffer containing the Tx data.
4066 * @dev : device pointer.
4067 * Description :
4068 * This function is the Tx entry point of the driver. S2IO NIC supports
4069 * certain protocol assist features on Tx side, namely CSO, S/G, LSO.
4070 * NOTE: when device cant queue the pkt,just the trans_start variable will
4071 * not be upadted.
4072 * Return value:
4073 * 0 on success & 1 on failure.
4074 */
4075
4076 static netdev_tx_t s2io_xmit(struct sk_buff *skb, struct net_device *dev)
4077 {
4078 struct s2io_nic *sp = netdev_priv(dev);
4079 u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
4080 register u64 val64;
4081 struct TxD *txdp;
4082 struct TxFIFO_element __iomem *tx_fifo;
4083 unsigned long flags = 0;
4084 u16 vlan_tag = 0;
4085 struct fifo_info *fifo = NULL;
4086 int do_spin_lock = 1;
4087 int offload_type;
4088 int enable_per_list_interrupt = 0;
4089 struct config_param *config = &sp->config;
4090 struct mac_info *mac_control = &sp->mac_control;
4091 struct stat_block *stats = mac_control->stats_info;
4092 struct swStat *swstats = &stats->sw_stat;
4093
4094 DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
4095
4096 if (unlikely(skb->len <= 0)) {
4097 DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name);
4098 dev_kfree_skb_any(skb);
4099 return NETDEV_TX_OK;
4100 }
4101
4102 if (!is_s2io_card_up(sp)) {
4103 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
4104 dev->name);
4105 dev_kfree_skb(skb);
4106 return NETDEV_TX_OK;
4107 }
4108
4109 queue = 0;
4110 if (sp->vlgrp && vlan_tx_tag_present(skb))
4111 vlan_tag = vlan_tx_tag_get(skb);
4112 if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) {
4113 if (skb->protocol == htons(ETH_P_IP)) {
4114 struct iphdr *ip;
4115 struct tcphdr *th;
4116 ip = ip_hdr(skb);
4117
4118 if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
4119 th = (struct tcphdr *)(((unsigned char *)ip) +
4120 ip->ihl*4);
4121
4122 if (ip->protocol == IPPROTO_TCP) {
4123 queue_len = sp->total_tcp_fifos;
4124 queue = (ntohs(th->source) +
4125 ntohs(th->dest)) &
4126 sp->fifo_selector[queue_len - 1];
4127 if (queue >= queue_len)
4128 queue = queue_len - 1;
4129 } else if (ip->protocol == IPPROTO_UDP) {
4130 queue_len = sp->total_udp_fifos;
4131 queue = (ntohs(th->source) +
4132 ntohs(th->dest)) &
4133 sp->fifo_selector[queue_len - 1];
4134 if (queue >= queue_len)
4135 queue = queue_len - 1;
4136 queue += sp->udp_fifo_idx;
4137 if (skb->len > 1024)
4138 enable_per_list_interrupt = 1;
4139 do_spin_lock = 0;
4140 }
4141 }
4142 }
4143 } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
4144 /* get fifo number based on skb->priority value */
4145 queue = config->fifo_mapping
4146 [skb->priority & (MAX_TX_FIFOS - 1)];
4147 fifo = &mac_control->fifos[queue];
4148
4149 if (do_spin_lock)
4150 spin_lock_irqsave(&fifo->tx_lock, flags);
4151 else {
4152 if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
4153 return NETDEV_TX_LOCKED;
4154 }
4155
4156 if (sp->config.multiq) {
4157 if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
4158 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4159 return NETDEV_TX_BUSY;
4160 }
4161 } else if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
4162 if (netif_queue_stopped(dev)) {
4163 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4164 return NETDEV_TX_BUSY;
4165 }
4166 }
4167
4168 put_off = (u16)fifo->tx_curr_put_info.offset;
4169 get_off = (u16)fifo->tx_curr_get_info.offset;
4170 txdp = (struct TxD *)fifo->list_info[put_off].list_virt_addr;
4171
4172 queue_len = fifo->tx_curr_put_info.fifo_len + 1;
4173 /* Avoid "put" pointer going beyond "get" pointer */
4174 if (txdp->Host_Control ||
4175 ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4176 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
4177 s2io_stop_tx_queue(sp, fifo->fifo_no);
4178 dev_kfree_skb(skb);
4179 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4180 return NETDEV_TX_OK;
4181 }
4182
4183 offload_type = s2io_offload_type(skb);
4184 if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
4185 txdp->Control_1 |= TXD_TCP_LSO_EN;
4186 txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
4187 }
4188 if (skb->ip_summed == CHECKSUM_PARTIAL) {
4189 txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN |
4190 TXD_TX_CKO_TCP_EN |
4191 TXD_TX_CKO_UDP_EN);
4192 }
4193 txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
4194 txdp->Control_1 |= TXD_LIST_OWN_XENA;
4195 txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no);
4196 if (enable_per_list_interrupt)
4197 if (put_off & (queue_len >> 5))
4198 txdp->Control_2 |= TXD_INT_TYPE_PER_LIST;
4199 if (vlan_tag) {
4200 txdp->Control_2 |= TXD_VLAN_ENABLE;
4201 txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
4202 }
4203
4204 frg_len = skb_headlen(skb);
4205 if (offload_type == SKB_GSO_UDP) {
4206 int ufo_size;
4207
4208 ufo_size = s2io_udp_mss(skb);
4209 ufo_size &= ~7;
4210 txdp->Control_1 |= TXD_UFO_EN;
4211 txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
4212 txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
4213 #ifdef __BIG_ENDIAN
4214 /* both variants do cpu_to_be64(be32_to_cpu(...)) */
4215 fifo->ufo_in_band_v[put_off] =
4216 (__force u64)skb_shinfo(skb)->ip6_frag_id;
4217 #else
4218 fifo->ufo_in_band_v[put_off] =
4219 (__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
4220 #endif
4221 txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v;
4222 txdp->Buffer_Pointer = pci_map_single(sp->pdev,
4223 fifo->ufo_in_band_v,
4224 sizeof(u64),
4225 PCI_DMA_TODEVICE);
4226 if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
4227 goto pci_map_failed;
4228 txdp++;
4229 }
4230
4231 txdp->Buffer_Pointer = pci_map_single(sp->pdev, skb->data,
4232 frg_len, PCI_DMA_TODEVICE);
4233 if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
4234 goto pci_map_failed;
4235
4236 txdp->Host_Control = (unsigned long)skb;
4237 txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
4238 if (offload_type == SKB_GSO_UDP)
4239 txdp->Control_1 |= TXD_UFO_EN;
4240
4241 frg_cnt = skb_shinfo(skb)->nr_frags;
4242 /* For fragmented SKB. */
4243 for (i = 0; i < frg_cnt; i++) {
4244 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
4245 /* A '0' length fragment will be ignored */
4246 if (!frag->size)
4247 continue;
4248 txdp++;
4249 txdp->Buffer_Pointer = (u64)pci_map_page(sp->pdev, frag->page,
4250 frag->page_offset,
4251 frag->size,
4252 PCI_DMA_TODEVICE);
4253 txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
4254 if (offload_type == SKB_GSO_UDP)
4255 txdp->Control_1 |= TXD_UFO_EN;
4256 }
4257 txdp->Control_1 |= TXD_GATHER_CODE_LAST;
4258
4259 if (offload_type == SKB_GSO_UDP)
4260 frg_cnt++; /* as Txd0 was used for inband header */
4261
4262 tx_fifo = mac_control->tx_FIFO_start[queue];
4263 val64 = fifo->list_info[put_off].list_phy_addr;
4264 writeq(val64, &tx_fifo->TxDL_Pointer);
4265
4266 val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
4267 TX_FIFO_LAST_LIST);
4268 if (offload_type)
4269 val64 |= TX_FIFO_SPECIAL_FUNC;
4270
4271 writeq(val64, &tx_fifo->List_Control);
4272
4273 mmiowb();
4274
4275 put_off++;
4276 if (put_off == fifo->tx_curr_put_info.fifo_len + 1)
4277 put_off = 0;
4278 fifo->tx_curr_put_info.offset = put_off;
4279
4280 /* Avoid "put" pointer going beyond "get" pointer */
4281 if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4282 swstats->fifo_full_cnt++;
4283 DBG_PRINT(TX_DBG,
4284 "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
4285 put_off, get_off);
4286 s2io_stop_tx_queue(sp, fifo->fifo_no);
4287 }
4288 swstats->mem_allocated += skb->truesize;
4289 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4290
4291 if (sp->config.intr_type == MSI_X)
4292 tx_intr_handler(fifo);
4293
4294 return NETDEV_TX_OK;
4295
4296 pci_map_failed:
4297 swstats->pci_map_fail_cnt++;
4298 s2io_stop_tx_queue(sp, fifo->fifo_no);
4299 swstats->mem_freed += skb->truesize;
4300 dev_kfree_skb(skb);
4301 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4302 return NETDEV_TX_OK;
4303 }
4304
4305 static void
4306 s2io_alarm_handle(unsigned long data)
4307 {
4308 struct s2io_nic *sp = (struct s2io_nic *)data;
4309 struct net_device *dev = sp->dev;
4310
4311 s2io_handle_errors(dev);
4312 mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
4313 }
4314
4315 static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
4316 {
4317 struct ring_info *ring = (struct ring_info *)dev_id;
4318 struct s2io_nic *sp = ring->nic;
4319 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4320
4321 if (unlikely(!is_s2io_card_up(sp)))
4322 return IRQ_HANDLED;
4323
4324 if (sp->config.napi) {
4325 u8 __iomem *addr = NULL;
4326 u8 val8 = 0;
4327
4328 addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
4329 addr += (7 - ring->ring_no);
4330 val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
4331 writeb(val8, addr);
4332 val8 = readb(addr);
4333 napi_schedule(&ring->napi);
4334 } else {
4335 rx_intr_handler(ring, 0);
4336 s2io_chk_rx_buffers(sp, ring);
4337 }
4338
4339 return IRQ_HANDLED;
4340 }
4341
4342 static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
4343 {
4344 int i;
4345 struct fifo_info *fifos = (struct fifo_info *)dev_id;
4346 struct s2io_nic *sp = fifos->nic;
4347 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4348 struct config_param *config = &sp->config;
4349 u64 reason;
4350
4351 if (unlikely(!is_s2io_card_up(sp)))
4352 return IRQ_NONE;
4353
4354 reason = readq(&bar0->general_int_status);
4355 if (unlikely(reason == S2IO_MINUS_ONE))
4356 /* Nothing much can be done. Get out */
4357 return IRQ_HANDLED;
4358
4359 if (reason & (GEN_INTR_TXPIC | GEN_INTR_TXTRAFFIC)) {
4360 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4361
4362 if (reason & GEN_INTR_TXPIC)
4363 s2io_txpic_intr_handle(sp);
4364
4365 if (reason & GEN_INTR_TXTRAFFIC)
4366 writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4367
4368 for (i = 0; i < config->tx_fifo_num; i++)
4369 tx_intr_handler(&fifos[i]);
4370
4371 writeq(sp->general_int_mask, &bar0->general_int_mask);
4372 readl(&bar0->general_int_status);
4373 return IRQ_HANDLED;
4374 }
4375 /* The interrupt was not raised by us */
4376 return IRQ_NONE;
4377 }
4378
4379 static void s2io_txpic_intr_handle(struct s2io_nic *sp)
4380 {
4381 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4382 u64 val64;
4383
4384 val64 = readq(&bar0->pic_int_status);
4385 if (val64 & PIC_INT_GPIO) {
4386 val64 = readq(&bar0->gpio_int_reg);
4387 if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
4388 (val64 & GPIO_INT_REG_LINK_UP)) {
4389 /*
4390 * This is unstable state so clear both up/down
4391 * interrupt and adapter to re-evaluate the link state.
4392 */
4393 val64 |= GPIO_INT_REG_LINK_DOWN;
4394 val64 |= GPIO_INT_REG_LINK_UP;
4395 writeq(val64, &bar0->gpio_int_reg);
4396 val64 = readq(&bar0->gpio_int_mask);
4397 val64 &= ~(GPIO_INT_MASK_LINK_UP |
4398 GPIO_INT_MASK_LINK_DOWN);
4399 writeq(val64, &bar0->gpio_int_mask);
4400 } else if (val64 & GPIO_INT_REG_LINK_UP) {
4401 val64 = readq(&bar0->adapter_status);
4402 /* Enable Adapter */
4403 val64 = readq(&bar0->adapter_control);
4404 val64 |= ADAPTER_CNTL_EN;
4405 writeq(val64, &bar0->adapter_control);
4406 val64 |= ADAPTER_LED_ON;
4407 writeq(val64, &bar0->adapter_control);
4408 if (!sp->device_enabled_once)
4409 sp->device_enabled_once = 1;
4410
4411 s2io_link(sp, LINK_UP);
4412 /*
4413 * unmask link down interrupt and mask link-up
4414 * intr
4415 */
4416 val64 = readq(&bar0->gpio_int_mask);
4417 val64 &= ~GPIO_INT_MASK_LINK_DOWN;
4418 val64 |= GPIO_INT_MASK_LINK_UP;
4419 writeq(val64, &bar0->gpio_int_mask);
4420
4421 } else if (val64 & GPIO_INT_REG_LINK_DOWN) {
4422 val64 = readq(&bar0->adapter_status);
4423 s2io_link(sp, LINK_DOWN);
4424 /* Link is down so unmaks link up interrupt */
4425 val64 = readq(&bar0->gpio_int_mask);
4426 val64 &= ~GPIO_INT_MASK_LINK_UP;
4427 val64 |= GPIO_INT_MASK_LINK_DOWN;
4428 writeq(val64, &bar0->gpio_int_mask);
4429
4430 /* turn off LED */
4431 val64 = readq(&bar0->adapter_control);
4432 val64 = val64 & (~ADAPTER_LED_ON);
4433 writeq(val64, &bar0->adapter_control);
4434 }
4435 }
4436 val64 = readq(&bar0->gpio_int_mask);
4437 }
4438
4439 /**
4440 * do_s2io_chk_alarm_bit - Check for alarm and incrment the counter
4441 * @value: alarm bits
4442 * @addr: address value
4443 * @cnt: counter variable
4444 * Description: Check for alarm and increment the counter
4445 * Return Value:
4446 * 1 - if alarm bit set
4447 * 0 - if alarm bit is not set
4448 */
4449 static int do_s2io_chk_alarm_bit(u64 value, void __iomem *addr,
4450 unsigned long long *cnt)
4451 {
4452 u64 val64;
4453 val64 = readq(addr);
4454 if (val64 & value) {
4455 writeq(val64, addr);
4456 (*cnt)++;
4457 return 1;
4458 }
4459 return 0;
4460
4461 }
4462
4463 /**
4464 * s2io_handle_errors - Xframe error indication handler
4465 * @nic: device private variable
4466 * Description: Handle alarms such as loss of link, single or
4467 * double ECC errors, critical and serious errors.
4468 * Return Value:
4469 * NONE
4470 */
4471 static void s2io_handle_errors(void *dev_id)
4472 {
4473 struct net_device *dev = (struct net_device *)dev_id;
4474 struct s2io_nic *sp = netdev_priv(dev);
4475 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4476 u64 temp64 = 0, val64 = 0;
4477 int i = 0;
4478
4479 struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat;
4480 struct xpakStat *stats = &sp->mac_control.stats_info->xpak_stat;
4481
4482 if (!is_s2io_card_up(sp))
4483 return;
4484
4485 if (pci_channel_offline(sp->pdev))
4486 return;
4487
4488 memset(&sw_stat->ring_full_cnt, 0,
4489 sizeof(sw_stat->ring_full_cnt));
4490
4491 /* Handling the XPAK counters update */
4492 if (stats->xpak_timer_count < 72000) {
4493 /* waiting for an hour */
4494 stats->xpak_timer_count++;
4495 } else {
4496 s2io_updt_xpak_counter(dev);
4497 /* reset the count to zero */
4498 stats->xpak_timer_count = 0;
4499 }
4500
4501 /* Handling link status change error Intr */
4502 if (s2io_link_fault_indication(sp) == MAC_RMAC_ERR_TIMER) {
4503 val64 = readq(&bar0->mac_rmac_err_reg);
4504 writeq(val64, &bar0->mac_rmac_err_reg);
4505 if (val64 & RMAC_LINK_STATE_CHANGE_INT)
4506 schedule_work(&sp->set_link_task);
4507 }
4508
4509 /* In case of a serious error, the device will be Reset. */
4510 if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source,
4511 &sw_stat->serious_err_cnt))
4512 goto reset;
4513
4514 /* Check for data parity error */
4515 if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg,
4516 &sw_stat->parity_err_cnt))
4517 goto reset;
4518
4519 /* Check for ring full counter */
4520 if (sp->device_type == XFRAME_II_DEVICE) {
4521 val64 = readq(&bar0->ring_bump_counter1);
4522 for (i = 0; i < 4; i++) {
4523 temp64 = (val64 & vBIT(0xFFFF, (i*16), 16));
4524 temp64 >>= 64 - ((i+1)*16);
4525 sw_stat->ring_full_cnt[i] += temp64;
4526 }
4527
4528 val64 = readq(&bar0->ring_bump_counter2);
4529 for (i = 0; i < 4; i++) {
4530 temp64 = (val64 & vBIT(0xFFFF, (i*16), 16));
4531 temp64 >>= 64 - ((i+1)*16);
4532 sw_stat->ring_full_cnt[i+4] += temp64;
4533 }
4534 }
4535
4536 val64 = readq(&bar0->txdma_int_status);
4537 /*check for pfc_err*/
4538 if (val64 & TXDMA_PFC_INT) {
4539 if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
4540 PFC_MISC_0_ERR | PFC_MISC_1_ERR |
4541 PFC_PCIX_ERR,
4542 &bar0->pfc_err_reg,
4543 &sw_stat->pfc_err_cnt))
4544 goto reset;
4545 do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR,
4546 &bar0->pfc_err_reg,
4547 &sw_stat->pfc_err_cnt);
4548 }
4549
4550 /*check for tda_err*/
4551 if (val64 & TXDMA_TDA_INT) {
4552 if (do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR |
4553 TDA_SM0_ERR_ALARM |
4554 TDA_SM1_ERR_ALARM,
4555 &bar0->tda_err_reg,
4556 &sw_stat->tda_err_cnt))
4557 goto reset;
4558 do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR,
4559 &bar0->tda_err_reg,
4560 &sw_stat->tda_err_cnt);
4561 }
4562 /*check for pcc_err*/
4563 if (val64 & TXDMA_PCC_INT) {
4564 if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
4565 PCC_N_SERR | PCC_6_COF_OV_ERR |
4566 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
4567 PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR |
4568 PCC_TXB_ECC_DB_ERR,
4569 &bar0->pcc_err_reg,
4570 &sw_stat->pcc_err_cnt))
4571 goto reset;
4572 do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR,
4573 &bar0->pcc_err_reg,
4574 &sw_stat->pcc_err_cnt);
4575 }
4576
4577 /*check for tti_err*/
4578 if (val64 & TXDMA_TTI_INT) {
4579 if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM,
4580 &bar0->tti_err_reg,
4581 &sw_stat->tti_err_cnt))
4582 goto reset;
4583 do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR,
4584 &bar0->tti_err_reg,
4585 &sw_stat->tti_err_cnt);
4586 }
4587
4588 /*check for lso_err*/
4589 if (val64 & TXDMA_LSO_INT) {
4590 if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT |
4591 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM,
4592 &bar0->lso_err_reg,
4593 &sw_stat->lso_err_cnt))
4594 goto reset;
4595 do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
4596 &bar0->lso_err_reg,
4597 &sw_stat->lso_err_cnt);
4598 }
4599
4600 /*check for tpa_err*/
4601 if (val64 & TXDMA_TPA_INT) {
4602 if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM,
4603 &bar0->tpa_err_reg,
4604 &sw_stat->tpa_err_cnt))
4605 goto reset;
4606 do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP,
4607 &bar0->tpa_err_reg,
4608 &sw_stat->tpa_err_cnt);
4609 }
4610
4611 /*check for sm_err*/
4612 if (val64 & TXDMA_SM_INT) {
4613 if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM,
4614 &bar0->sm_err_reg,
4615 &sw_stat->sm_err_cnt))
4616 goto reset;
4617 }
4618
4619 val64 = readq(&bar0->mac_int_status);
4620 if (val64 & MAC_INT_STATUS_TMAC_INT) {
4621 if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR,
4622 &bar0->mac_tmac_err_reg,
4623 &sw_stat->mac_tmac_err_cnt))
4624 goto reset;
4625 do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
4626 TMAC_DESC_ECC_SG_ERR |
4627 TMAC_DESC_ECC_DB_ERR,
4628 &bar0->mac_tmac_err_reg,
4629 &sw_stat->mac_tmac_err_cnt);
4630 }
4631
4632 val64 = readq(&bar0->xgxs_int_status);
4633 if (val64 & XGXS_INT_STATUS_TXGXS) {
4634 if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR,
4635 &bar0->xgxs_txgxs_err_reg,
4636 &sw_stat->xgxs_txgxs_err_cnt))
4637 goto reset;
4638 do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
4639 &bar0->xgxs_txgxs_err_reg,
4640 &sw_stat->xgxs_txgxs_err_cnt);
4641 }
4642
4643 val64 = readq(&bar0->rxdma_int_status);
4644 if (val64 & RXDMA_INT_RC_INT_M) {
4645 if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR |
4646 RC_FTC_ECC_DB_ERR |
4647 RC_PRCn_SM_ERR_ALARM |
4648 RC_FTC_SM_ERR_ALARM,
4649 &bar0->rc_err_reg,
4650 &sw_stat->rc_err_cnt))
4651 goto reset;
4652 do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR |
4653 RC_FTC_ECC_SG_ERR |
4654 RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg,
4655 &sw_stat->rc_err_cnt);
4656 if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn |
4657 PRC_PCI_AB_WR_Rn |
4658 PRC_PCI_AB_F_WR_Rn,
4659 &bar0->prc_pcix_err_reg,
4660 &sw_stat->prc_pcix_err_cnt))
4661 goto reset;
4662 do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn |
4663 PRC_PCI_DP_WR_Rn |
4664 PRC_PCI_DP_F_WR_Rn,
4665 &bar0->prc_pcix_err_reg,
4666 &sw_stat->prc_pcix_err_cnt);
4667 }
4668
4669 if (val64 & RXDMA_INT_RPA_INT_M) {
4670 if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR,
4671 &bar0->rpa_err_reg,
4672 &sw_stat->rpa_err_cnt))
4673 goto reset;
4674 do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR,
4675 &bar0->rpa_err_reg,
4676 &sw_stat->rpa_err_cnt);
4677 }
4678
4679 if (val64 & RXDMA_INT_RDA_INT_M) {
4680 if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR |
4681 RDA_FRM_ECC_DB_N_AERR |
4682 RDA_SM1_ERR_ALARM |
4683 RDA_SM0_ERR_ALARM |
4684 RDA_RXD_ECC_DB_SERR,
4685 &bar0->rda_err_reg,
4686 &sw_stat->rda_err_cnt))
4687 goto reset;
4688 do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR |
4689 RDA_FRM_ECC_SG_ERR |
4690 RDA_MISC_ERR |
4691 RDA_PCIX_ERR,
4692 &bar0->rda_err_reg,
4693 &sw_stat->rda_err_cnt);
4694 }
4695
4696 if (val64 & RXDMA_INT_RTI_INT_M) {
4697 if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM,
4698 &bar0->rti_err_reg,
4699 &sw_stat->rti_err_cnt))
4700 goto reset;
4701 do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
4702 &bar0->rti_err_reg,
4703 &sw_stat->rti_err_cnt);
4704 }
4705
4706 val64 = readq(&bar0->mac_int_status);
4707 if (val64 & MAC_INT_STATUS_RMAC_INT) {
4708 if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR,
4709 &bar0->mac_rmac_err_reg,
4710 &sw_stat->mac_rmac_err_cnt))
4711 goto reset;
4712 do_s2io_chk_alarm_bit(RMAC_UNUSED_INT |
4713 RMAC_SINGLE_ECC_ERR |
4714 RMAC_DOUBLE_ECC_ERR,
4715 &bar0->mac_rmac_err_reg,
4716 &sw_stat->mac_rmac_err_cnt);
4717 }
4718
4719 val64 = readq(&bar0->xgxs_int_status);
4720 if (val64 & XGXS_INT_STATUS_RXGXS) {
4721 if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR,
4722 &bar0->xgxs_rxgxs_err_reg,
4723 &sw_stat->xgxs_rxgxs_err_cnt))
4724 goto reset;
4725 }
4726
4727 val64 = readq(&bar0->mc_int_status);
4728 if (val64 & MC_INT_STATUS_MC_INT) {
4729 if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR,
4730 &bar0->mc_err_reg,
4731 &sw_stat->mc_err_cnt))
4732 goto reset;
4733
4734 /* Handling Ecc errors */
4735 if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
4736 writeq(val64, &bar0->mc_err_reg);
4737 if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
4738 sw_stat->double_ecc_errs++;
4739 if (sp->device_type != XFRAME_II_DEVICE) {
4740 /*
4741 * Reset XframeI only if critical error
4742 */
4743 if (val64 &
4744 (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
4745 MC_ERR_REG_MIRI_ECC_DB_ERR_1))
4746 goto reset;
4747 }
4748 } else
4749 sw_stat->single_ecc_errs++;
4750 }
4751 }
4752 return;
4753
4754 reset:
4755 s2io_stop_all_tx_queue(sp);
4756 schedule_work(&sp->rst_timer_task);
4757 sw_stat->soft_reset_cnt++;
4758 }
4759
4760 /**
4761 * s2io_isr - ISR handler of the device .
4762 * @irq: the irq of the device.
4763 * @dev_id: a void pointer to the dev structure of the NIC.
4764 * Description: This function is the ISR handler of the device. It
4765 * identifies the reason for the interrupt and calls the relevant
4766 * service routines. As a contongency measure, this ISR allocates the
4767 * recv buffers, if their numbers are below the panic value which is
4768 * presently set to 25% of the original number of rcv buffers allocated.
4769 * Return value:
4770 * IRQ_HANDLED: will be returned if IRQ was handled by this routine
4771 * IRQ_NONE: will be returned if interrupt is not from our device
4772 */
4773 static irqreturn_t s2io_isr(int irq, void *dev_id)
4774 {
4775 struct net_device *dev = (struct net_device *)dev_id;
4776 struct s2io_nic *sp = netdev_priv(dev);
4777 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4778 int i;
4779 u64 reason = 0;
4780 struct mac_info *mac_control;
4781 struct config_param *config;
4782
4783 /* Pretend we handled any irq's from a disconnected card */
4784 if (pci_channel_offline(sp->pdev))
4785 return IRQ_NONE;
4786
4787 if (!is_s2io_card_up(sp))
4788 return IRQ_NONE;
4789
4790 config = &sp->config;
4791 mac_control = &sp->mac_control;
4792
4793 /*
4794 * Identify the cause for interrupt and call the appropriate
4795 * interrupt handler. Causes for the interrupt could be;
4796 * 1. Rx of packet.
4797 * 2. Tx complete.
4798 * 3. Link down.
4799 */
4800 reason = readq(&bar0->general_int_status);
4801
4802 if (unlikely(reason == S2IO_MINUS_ONE))
4803 return IRQ_HANDLED; /* Nothing much can be done. Get out */
4804
4805 if (reason &
4806 (GEN_INTR_RXTRAFFIC | GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC)) {
4807 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4808
4809 if (config->napi) {
4810 if (reason & GEN_INTR_RXTRAFFIC) {
4811 napi_schedule(&sp->napi);
4812 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
4813 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4814 readl(&bar0->rx_traffic_int);
4815 }
4816 } else {
4817 /*
4818 * rx_traffic_int reg is an R1 register, writing all 1's
4819 * will ensure that the actual interrupt causing bit
4820 * get's cleared and hence a read can be avoided.
4821 */
4822 if (reason & GEN_INTR_RXTRAFFIC)
4823 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4824
4825 for (i = 0; i < config->rx_ring_num; i++) {
4826 struct ring_info *ring = &mac_control->rings[i];
4827
4828 rx_intr_handler(ring, 0);
4829 }
4830 }
4831
4832 /*
4833 * tx_traffic_int reg is an R1 register, writing all 1's
4834 * will ensure that the actual interrupt causing bit get's
4835 * cleared and hence a read can be avoided.
4836 */
4837 if (reason & GEN_INTR_TXTRAFFIC)
4838 writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4839
4840 for (i = 0; i < config->tx_fifo_num; i++)
4841 tx_intr_handler(&mac_control->fifos[i]);
4842
4843 if (reason & GEN_INTR_TXPIC)
4844 s2io_txpic_intr_handle(sp);
4845
4846 /*
4847 * Reallocate the buffers from the interrupt handler itself.
4848 */
4849 if (!config->napi) {
4850 for (i = 0; i < config->rx_ring_num; i++) {
4851 struct ring_info *ring = &mac_control->rings[i];
4852
4853 s2io_chk_rx_buffers(sp, ring);
4854 }
4855 }
4856 writeq(sp->general_int_mask, &bar0->general_int_mask);
4857 readl(&bar0->general_int_status);
4858
4859 return IRQ_HANDLED;
4860
4861 } else if (!reason) {
4862 /* The interrupt was not raised by us */
4863 return IRQ_NONE;
4864 }
4865
4866 return IRQ_HANDLED;
4867 }
4868
4869 /**
4870 * s2io_updt_stats -
4871 */
4872 static void s2io_updt_stats(struct s2io_nic *sp)
4873 {
4874 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4875 u64 val64;
4876 int cnt = 0;
4877
4878 if (is_s2io_card_up(sp)) {
4879 /* Apprx 30us on a 133 MHz bus */
4880 val64 = SET_UPDT_CLICKS(10) |
4881 STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
4882 writeq(val64, &bar0->stat_cfg);
4883 do {
4884 udelay(100);
4885 val64 = readq(&bar0->stat_cfg);
4886 if (!(val64 & s2BIT(0)))
4887 break;
4888 cnt++;
4889 if (cnt == 5)
4890 break; /* Updt failed */
4891 } while (1);
4892 }
4893 }
4894
4895 /**
4896 * s2io_get_stats - Updates the device statistics structure.
4897 * @dev : pointer to the device structure.
4898 * Description:
4899 * This function updates the device statistics structure in the s2io_nic
4900 * structure and returns a pointer to the same.
4901 * Return value:
4902 * pointer to the updated net_device_stats structure.
4903 */
4904
4905 static struct net_device_stats *s2io_get_stats(struct net_device *dev)
4906 {
4907 struct s2io_nic *sp = netdev_priv(dev);
4908 struct config_param *config = &sp->config;
4909 struct mac_info *mac_control = &sp->mac_control;
4910 struct stat_block *stats = mac_control->stats_info;
4911 int i;
4912
4913 /* Configure Stats for immediate updt */
4914 s2io_updt_stats(sp);
4915
4916 /* Using sp->stats as a staging area, because reset (due to mtu
4917 change, for example) will clear some hardware counters */
4918 dev->stats.tx_packets += le32_to_cpu(stats->tmac_frms) -
4919 sp->stats.tx_packets;
4920 sp->stats.tx_packets = le32_to_cpu(stats->tmac_frms);
4921
4922 dev->stats.tx_errors += le32_to_cpu(stats->tmac_any_err_frms) -
4923 sp->stats.tx_errors;
4924 sp->stats.tx_errors = le32_to_cpu(stats->tmac_any_err_frms);
4925
4926 dev->stats.rx_errors += le64_to_cpu(stats->rmac_drop_frms) -
4927 sp->stats.rx_errors;
4928 sp->stats.rx_errors = le64_to_cpu(stats->rmac_drop_frms);
4929
4930 dev->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms) -
4931 sp->stats.multicast;
4932 sp->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms);
4933
4934 dev->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms) -
4935 sp->stats.rx_length_errors;
4936 sp->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms);
4937
4938 /* collect per-ring rx_packets and rx_bytes */
4939 dev->stats.rx_packets = dev->stats.rx_bytes = 0;
4940 for (i = 0; i < config->rx_ring_num; i++) {
4941 struct ring_info *ring = &mac_control->rings[i];
4942
4943 dev->stats.rx_packets += ring->rx_packets;
4944 dev->stats.rx_bytes += ring->rx_bytes;
4945 }
4946
4947 return &dev->stats;
4948 }
4949
4950 /**
4951 * s2io_set_multicast - entry point for multicast address enable/disable.
4952 * @dev : pointer to the device structure
4953 * Description:
4954 * This function is a driver entry point which gets called by the kernel
4955 * whenever multicast addresses must be enabled/disabled. This also gets
4956 * called to set/reset promiscuous mode. Depending on the deivce flag, we
4957 * determine, if multicast address must be enabled or if promiscuous mode
4958 * is to be disabled etc.
4959 * Return value:
4960 * void.
4961 */
4962
4963 static void s2io_set_multicast(struct net_device *dev)
4964 {
4965 int i, j, prev_cnt;
4966 struct netdev_hw_addr *ha;
4967 struct s2io_nic *sp = netdev_priv(dev);
4968 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4969 u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
4970 0xfeffffffffffULL;
4971 u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
4972 void __iomem *add;
4973 struct config_param *config = &sp->config;
4974
4975 if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
4976 /* Enable all Multicast addresses */
4977 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
4978 &bar0->rmac_addr_data0_mem);
4979 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
4980 &bar0->rmac_addr_data1_mem);
4981 val64 = RMAC_ADDR_CMD_MEM_WE |
4982 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4983 RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
4984 writeq(val64, &bar0->rmac_addr_cmd_mem);
4985 /* Wait till command completes */
4986 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4987 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4988 S2IO_BIT_RESET);
4989
4990 sp->m_cast_flg = 1;
4991 sp->all_multi_pos = config->max_mc_addr - 1;
4992 } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
4993 /* Disable all Multicast addresses */
4994 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
4995 &bar0->rmac_addr_data0_mem);
4996 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
4997 &bar0->rmac_addr_data1_mem);
4998 val64 = RMAC_ADDR_CMD_MEM_WE |
4999 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5000 RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
5001 writeq(val64, &bar0->rmac_addr_cmd_mem);
5002 /* Wait till command completes */
5003 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5004 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5005 S2IO_BIT_RESET);
5006
5007 sp->m_cast_flg = 0;
5008 sp->all_multi_pos = 0;
5009 }
5010
5011 if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
5012 /* Put the NIC into promiscuous mode */
5013 add = &bar0->mac_cfg;
5014 val64 = readq(&bar0->mac_cfg);
5015 val64 |= MAC_CFG_RMAC_PROM_ENABLE;
5016
5017 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5018 writel((u32)val64, add);
5019 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5020 writel((u32) (val64 >> 32), (add + 4));
5021
5022 if (vlan_tag_strip != 1) {
5023 val64 = readq(&bar0->rx_pa_cfg);
5024 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
5025 writeq(val64, &bar0->rx_pa_cfg);
5026 sp->vlan_strip_flag = 0;
5027 }
5028
5029 val64 = readq(&bar0->mac_cfg);
5030 sp->promisc_flg = 1;
5031 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
5032 dev->name);
5033 } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
5034 /* Remove the NIC from promiscuous mode */
5035 add = &bar0->mac_cfg;
5036 val64 = readq(&bar0->mac_cfg);
5037 val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
5038
5039 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5040 writel((u32)val64, add);
5041 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5042 writel((u32) (val64 >> 32), (add + 4));
5043
5044 if (vlan_tag_strip != 0) {
5045 val64 = readq(&bar0->rx_pa_cfg);
5046 val64 |= RX_PA_CFG_STRIP_VLAN_TAG;
5047 writeq(val64, &bar0->rx_pa_cfg);
5048 sp->vlan_strip_flag = 1;
5049 }
5050
5051 val64 = readq(&bar0->mac_cfg);
5052 sp->promisc_flg = 0;
5053 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name);
5054 }
5055
5056 /* Update individual M_CAST address list */
5057 if ((!sp->m_cast_flg) && netdev_mc_count(dev)) {
5058 if (netdev_mc_count(dev) >
5059 (config->max_mc_addr - config->max_mac_addr)) {
5060 DBG_PRINT(ERR_DBG,
5061 "%s: No more Rx filters can be added - "
5062 "please enable ALL_MULTI instead\n",
5063 dev->name);
5064 return;
5065 }
5066
5067 prev_cnt = sp->mc_addr_count;
5068 sp->mc_addr_count = netdev_mc_count(dev);
5069
5070 /* Clear out the previous list of Mc in the H/W. */
5071 for (i = 0; i < prev_cnt; i++) {
5072 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
5073 &bar0->rmac_addr_data0_mem);
5074 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5075 &bar0->rmac_addr_data1_mem);
5076 val64 = RMAC_ADDR_CMD_MEM_WE |
5077 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5078 RMAC_ADDR_CMD_MEM_OFFSET
5079 (config->mc_start_offset + i);
5080 writeq(val64, &bar0->rmac_addr_cmd_mem);
5081
5082 /* Wait for command completes */
5083 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5084 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5085 S2IO_BIT_RESET)) {
5086 DBG_PRINT(ERR_DBG,
5087 "%s: Adding Multicasts failed\n",
5088 dev->name);
5089 return;
5090 }
5091 }
5092
5093 /* Create the new Rx filter list and update the same in H/W. */
5094 i = 0;
5095 netdev_for_each_mc_addr(ha, dev) {
5096 memcpy(sp->usr_addrs[i].addr, ha->addr,
5097 ETH_ALEN);
5098 mac_addr = 0;
5099 for (j = 0; j < ETH_ALEN; j++) {
5100 mac_addr |= ha->addr[j];
5101 mac_addr <<= 8;
5102 }
5103 mac_addr >>= 8;
5104 writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
5105 &bar0->rmac_addr_data0_mem);
5106 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5107 &bar0->rmac_addr_data1_mem);
5108 val64 = RMAC_ADDR_CMD_MEM_WE |
5109 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5110 RMAC_ADDR_CMD_MEM_OFFSET
5111 (i + config->mc_start_offset);
5112 writeq(val64, &bar0->rmac_addr_cmd_mem);
5113
5114 /* Wait for command completes */
5115 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5116 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5117 S2IO_BIT_RESET)) {
5118 DBG_PRINT(ERR_DBG,
5119 "%s: Adding Multicasts failed\n",
5120 dev->name);
5121 return;
5122 }
5123 i++;
5124 }
5125 }
5126 }
5127
5128 /* read from CAM unicast & multicast addresses and store it in
5129 * def_mac_addr structure
5130 */
5131 static void do_s2io_store_unicast_mc(struct s2io_nic *sp)
5132 {
5133 int offset;
5134 u64 mac_addr = 0x0;
5135 struct config_param *config = &sp->config;
5136
5137 /* store unicast & multicast mac addresses */
5138 for (offset = 0; offset < config->max_mc_addr; offset++) {
5139 mac_addr = do_s2io_read_unicast_mc(sp, offset);
5140 /* if read fails disable the entry */
5141 if (mac_addr == FAILURE)
5142 mac_addr = S2IO_DISABLE_MAC_ENTRY;
5143 do_s2io_copy_mac_addr(sp, offset, mac_addr);
5144 }
5145 }
5146
5147 /* restore unicast & multicast MAC to CAM from def_mac_addr structure */
5148 static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
5149 {
5150 int offset;
5151 struct config_param *config = &sp->config;
5152 /* restore unicast mac address */
5153 for (offset = 0; offset < config->max_mac_addr; offset++)
5154 do_s2io_prog_unicast(sp->dev,
5155 sp->def_mac_addr[offset].mac_addr);
5156
5157 /* restore multicast mac address */
5158 for (offset = config->mc_start_offset;
5159 offset < config->max_mc_addr; offset++)
5160 do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
5161 }
5162
5163 /* add a multicast MAC address to CAM */
5164 static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
5165 {
5166 int i;
5167 u64 mac_addr = 0;
5168 struct config_param *config = &sp->config;
5169
5170 for (i = 0; i < ETH_ALEN; i++) {
5171 mac_addr <<= 8;
5172 mac_addr |= addr[i];
5173 }
5174 if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
5175 return SUCCESS;
5176
5177 /* check if the multicast mac already preset in CAM */
5178 for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
5179 u64 tmp64;
5180 tmp64 = do_s2io_read_unicast_mc(sp, i);
5181 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5182 break;
5183
5184 if (tmp64 == mac_addr)
5185 return SUCCESS;
5186 }
5187 if (i == config->max_mc_addr) {
5188 DBG_PRINT(ERR_DBG,
5189 "CAM full no space left for multicast MAC\n");
5190 return FAILURE;
5191 }
5192 /* Update the internal structure with this new mac address */
5193 do_s2io_copy_mac_addr(sp, i, mac_addr);
5194
5195 return do_s2io_add_mac(sp, mac_addr, i);
5196 }
5197
5198 /* add MAC address to CAM */
5199 static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
5200 {
5201 u64 val64;
5202 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5203
5204 writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr),
5205 &bar0->rmac_addr_data0_mem);
5206
5207 val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5208 RMAC_ADDR_CMD_MEM_OFFSET(off);
5209 writeq(val64, &bar0->rmac_addr_cmd_mem);
5210
5211 /* Wait till command completes */
5212 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5213 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5214 S2IO_BIT_RESET)) {
5215 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
5216 return FAILURE;
5217 }
5218 return SUCCESS;
5219 }
5220 /* deletes a specified unicast/multicast mac entry from CAM */
5221 static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
5222 {
5223 int offset;
5224 u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
5225 struct config_param *config = &sp->config;
5226
5227 for (offset = 1;
5228 offset < config->max_mc_addr; offset++) {
5229 tmp64 = do_s2io_read_unicast_mc(sp, offset);
5230 if (tmp64 == addr) {
5231 /* disable the entry by writing 0xffffffffffffULL */
5232 if (do_s2io_add_mac(sp, dis_addr, offset) == FAILURE)
5233 return FAILURE;
5234 /* store the new mac list from CAM */
5235 do_s2io_store_unicast_mc(sp);
5236 return SUCCESS;
5237 }
5238 }
5239 DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
5240 (unsigned long long)addr);
5241 return FAILURE;
5242 }
5243
5244 /* read mac entries from CAM */
5245 static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
5246 {
5247 u64 tmp64 = 0xffffffffffff0000ULL, val64;
5248 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5249
5250 /* read mac addr */
5251 val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5252 RMAC_ADDR_CMD_MEM_OFFSET(offset);
5253 writeq(val64, &bar0->rmac_addr_cmd_mem);
5254
5255 /* Wait till command completes */
5256 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5257 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5258 S2IO_BIT_RESET)) {
5259 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
5260 return FAILURE;
5261 }
5262 tmp64 = readq(&bar0->rmac_addr_data0_mem);
5263
5264 return tmp64 >> 16;
5265 }
5266
5267 /**
5268 * s2io_set_mac_addr driver entry point
5269 */
5270
5271 static int s2io_set_mac_addr(struct net_device *dev, void *p)
5272 {
5273 struct sockaddr *addr = p;
5274
5275 if (!is_valid_ether_addr(addr->sa_data))
5276 return -EINVAL;
5277
5278 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
5279
5280 /* store the MAC address in CAM */
5281 return do_s2io_prog_unicast(dev, dev->dev_addr);
5282 }
5283 /**
5284 * do_s2io_prog_unicast - Programs the Xframe mac address
5285 * @dev : pointer to the device structure.
5286 * @addr: a uchar pointer to the new mac address which is to be set.
5287 * Description : This procedure will program the Xframe to receive
5288 * frames with new Mac Address
5289 * Return value: SUCCESS on success and an appropriate (-)ve integer
5290 * as defined in errno.h file on failure.
5291 */
5292
5293 static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
5294 {
5295 struct s2io_nic *sp = netdev_priv(dev);
5296 register u64 mac_addr = 0, perm_addr = 0;
5297 int i;
5298 u64 tmp64;
5299 struct config_param *config = &sp->config;
5300
5301 /*
5302 * Set the new MAC address as the new unicast filter and reflect this
5303 * change on the device address registered with the OS. It will be
5304 * at offset 0.
5305 */
5306 for (i = 0; i < ETH_ALEN; i++) {
5307 mac_addr <<= 8;
5308 mac_addr |= addr[i];
5309 perm_addr <<= 8;
5310 perm_addr |= sp->def_mac_addr[0].mac_addr[i];
5311 }
5312
5313 /* check if the dev_addr is different than perm_addr */
5314 if (mac_addr == perm_addr)
5315 return SUCCESS;
5316
5317 /* check if the mac already preset in CAM */
5318 for (i = 1; i < config->max_mac_addr; i++) {
5319 tmp64 = do_s2io_read_unicast_mc(sp, i);
5320 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5321 break;
5322
5323 if (tmp64 == mac_addr) {
5324 DBG_PRINT(INFO_DBG,
5325 "MAC addr:0x%llx already present in CAM\n",
5326 (unsigned long long)mac_addr);
5327 return SUCCESS;
5328 }
5329 }
5330 if (i == config->max_mac_addr) {
5331 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
5332 return FAILURE;
5333 }
5334 /* Update the internal structure with this new mac address */
5335 do_s2io_copy_mac_addr(sp, i, mac_addr);
5336
5337 return do_s2io_add_mac(sp, mac_addr, i);
5338 }
5339
5340 /**
5341 * s2io_ethtool_sset - Sets different link parameters.
5342 * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
5343 * @info: pointer to the structure with parameters given by ethtool to set
5344 * link information.
5345 * Description:
5346 * The function sets different link parameters provided by the user onto
5347 * the NIC.
5348 * Return value:
5349 * 0 on success.
5350 */
5351
5352 static int s2io_ethtool_sset(struct net_device *dev,
5353 struct ethtool_cmd *info)
5354 {
5355 struct s2io_nic *sp = netdev_priv(dev);
5356 if ((info->autoneg == AUTONEG_ENABLE) ||
5357 (info->speed != SPEED_10000) ||
5358 (info->duplex != DUPLEX_FULL))
5359 return -EINVAL;
5360 else {
5361 s2io_close(sp->dev);
5362 s2io_open(sp->dev);
5363 }
5364
5365 return 0;
5366 }
5367
5368 /**
5369 * s2io_ethtol_gset - Return link specific information.
5370 * @sp : private member of the device structure, pointer to the
5371 * s2io_nic structure.
5372 * @info : pointer to the structure with parameters given by ethtool
5373 * to return link information.
5374 * Description:
5375 * Returns link specific information like speed, duplex etc.. to ethtool.
5376 * Return value :
5377 * return 0 on success.
5378 */
5379
5380 static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
5381 {
5382 struct s2io_nic *sp = netdev_priv(dev);
5383 info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5384 info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5385 info->port = PORT_FIBRE;
5386
5387 /* info->transceiver */
5388 info->transceiver = XCVR_EXTERNAL;
5389
5390 if (netif_carrier_ok(sp->dev)) {
5391 info->speed = 10000;
5392 info->duplex = DUPLEX_FULL;
5393 } else {
5394 info->speed = -1;
5395 info->duplex = -1;
5396 }
5397
5398 info->autoneg = AUTONEG_DISABLE;
5399 return 0;
5400 }
5401
5402 /**
5403 * s2io_ethtool_gdrvinfo - Returns driver specific information.
5404 * @sp : private member of the device structure, which is a pointer to the
5405 * s2io_nic structure.
5406 * @info : pointer to the structure with parameters given by ethtool to
5407 * return driver information.
5408 * Description:
5409 * Returns driver specefic information like name, version etc.. to ethtool.
5410 * Return value:
5411 * void
5412 */
5413
5414 static void s2io_ethtool_gdrvinfo(struct net_device *dev,
5415 struct ethtool_drvinfo *info)
5416 {
5417 struct s2io_nic *sp = netdev_priv(dev);
5418
5419 strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
5420 strncpy(info->version, s2io_driver_version, sizeof(info->version));
5421 strncpy(info->fw_version, "", sizeof(info->fw_version));
5422 strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
5423 info->regdump_len = XENA_REG_SPACE;
5424 info->eedump_len = XENA_EEPROM_SPACE;
5425 }
5426
5427 /**
5428 * s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
5429 * @sp: private member of the device structure, which is a pointer to the
5430 * s2io_nic structure.
5431 * @regs : pointer to the structure with parameters given by ethtool for
5432 * dumping the registers.
5433 * @reg_space: The input argumnet into which all the registers are dumped.
5434 * Description:
5435 * Dumps the entire register space of xFrame NIC into the user given
5436 * buffer area.
5437 * Return value :
5438 * void .
5439 */
5440
5441 static void s2io_ethtool_gregs(struct net_device *dev,
5442 struct ethtool_regs *regs, void *space)
5443 {
5444 int i;
5445 u64 reg;
5446 u8 *reg_space = (u8 *)space;
5447 struct s2io_nic *sp = netdev_priv(dev);
5448
5449 regs->len = XENA_REG_SPACE;
5450 regs->version = sp->pdev->subsystem_device;
5451
5452 for (i = 0; i < regs->len; i += 8) {
5453 reg = readq(sp->bar0 + i);
5454 memcpy((reg_space + i), &reg, 8);
5455 }
5456 }
5457
5458 /**
5459 * s2io_phy_id - timer function that alternates adapter LED.
5460 * @data : address of the private member of the device structure, which
5461 * is a pointer to the s2io_nic structure, provided as an u32.
5462 * Description: This is actually the timer function that alternates the
5463 * adapter LED bit of the adapter control bit to set/reset every time on
5464 * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
5465 * once every second.
5466 */
5467 static void s2io_phy_id(unsigned long data)
5468 {
5469 struct s2io_nic *sp = (struct s2io_nic *)data;
5470 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5471 u64 val64 = 0;
5472 u16 subid;
5473
5474 subid = sp->pdev->subsystem_device;
5475 if ((sp->device_type == XFRAME_II_DEVICE) ||
5476 ((subid & 0xFF) >= 0x07)) {
5477 val64 = readq(&bar0->gpio_control);
5478 val64 ^= GPIO_CTRL_GPIO_0;
5479 writeq(val64, &bar0->gpio_control);
5480 } else {
5481 val64 = readq(&bar0->adapter_control);
5482 val64 ^= ADAPTER_LED_ON;
5483 writeq(val64, &bar0->adapter_control);
5484 }
5485
5486 mod_timer(&sp->id_timer, jiffies + HZ / 2);
5487 }
5488
5489 /**
5490 * s2io_ethtool_idnic - To physically identify the nic on the system.
5491 * @sp : private member of the device structure, which is a pointer to the
5492 * s2io_nic structure.
5493 * @id : pointer to the structure with identification parameters given by
5494 * ethtool.
5495 * Description: Used to physically identify the NIC on the system.
5496 * The Link LED will blink for a time specified by the user for
5497 * identification.
5498 * NOTE: The Link has to be Up to be able to blink the LED. Hence
5499 * identification is possible only if it's link is up.
5500 * Return value:
5501 * int , returns 0 on success
5502 */
5503
5504 static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
5505 {
5506 u64 val64 = 0, last_gpio_ctrl_val;
5507 struct s2io_nic *sp = netdev_priv(dev);
5508 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5509 u16 subid;
5510
5511 subid = sp->pdev->subsystem_device;
5512 last_gpio_ctrl_val = readq(&bar0->gpio_control);
5513 if ((sp->device_type == XFRAME_I_DEVICE) && ((subid & 0xFF) < 0x07)) {
5514 val64 = readq(&bar0->adapter_control);
5515 if (!(val64 & ADAPTER_CNTL_EN)) {
5516 pr_err("Adapter Link down, cannot blink LED\n");
5517 return -EFAULT;
5518 }
5519 }
5520 if (sp->id_timer.function == NULL) {
5521 init_timer(&sp->id_timer);
5522 sp->id_timer.function = s2io_phy_id;
5523 sp->id_timer.data = (unsigned long)sp;
5524 }
5525 mod_timer(&sp->id_timer, jiffies);
5526 if (data)
5527 msleep_interruptible(data * HZ);
5528 else
5529 msleep_interruptible(MAX_FLICKER_TIME);
5530 del_timer_sync(&sp->id_timer);
5531
5532 if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
5533 writeq(last_gpio_ctrl_val, &bar0->gpio_control);
5534 last_gpio_ctrl_val = readq(&bar0->gpio_control);
5535 }
5536
5537 return 0;
5538 }
5539
5540 static void s2io_ethtool_gringparam(struct net_device *dev,
5541 struct ethtool_ringparam *ering)
5542 {
5543 struct s2io_nic *sp = netdev_priv(dev);
5544 int i, tx_desc_count = 0, rx_desc_count = 0;
5545
5546 if (sp->rxd_mode == RXD_MODE_1)
5547 ering->rx_max_pending = MAX_RX_DESC_1;
5548 else if (sp->rxd_mode == RXD_MODE_3B)
5549 ering->rx_max_pending = MAX_RX_DESC_2;
5550
5551 ering->tx_max_pending = MAX_TX_DESC;
5552 for (i = 0 ; i < sp->config.tx_fifo_num ; i++)
5553 tx_desc_count += sp->config.tx_cfg[i].fifo_len;
5554
5555 DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds);
5556 ering->tx_pending = tx_desc_count;
5557 rx_desc_count = 0;
5558 for (i = 0 ; i < sp->config.rx_ring_num ; i++)
5559 rx_desc_count += sp->config.rx_cfg[i].num_rxd;
5560
5561 ering->rx_pending = rx_desc_count;
5562
5563 ering->rx_mini_max_pending = 0;
5564 ering->rx_mini_pending = 0;
5565 if (sp->rxd_mode == RXD_MODE_1)
5566 ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
5567 else if (sp->rxd_mode == RXD_MODE_3B)
5568 ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
5569 ering->rx_jumbo_pending = rx_desc_count;
5570 }
5571
5572 /**
5573 * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
5574 * @sp : private member of the device structure, which is a pointer to the
5575 * s2io_nic structure.
5576 * @ep : pointer to the structure with pause parameters given by ethtool.
5577 * Description:
5578 * Returns the Pause frame generation and reception capability of the NIC.
5579 * Return value:
5580 * void
5581 */
5582 static void s2io_ethtool_getpause_data(struct net_device *dev,
5583 struct ethtool_pauseparam *ep)
5584 {
5585 u64 val64;
5586 struct s2io_nic *sp = netdev_priv(dev);
5587 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5588
5589 val64 = readq(&bar0->rmac_pause_cfg);
5590 if (val64 & RMAC_PAUSE_GEN_ENABLE)
5591 ep->tx_pause = true;
5592 if (val64 & RMAC_PAUSE_RX_ENABLE)
5593 ep->rx_pause = true;
5594 ep->autoneg = false;
5595 }
5596
5597 /**
5598 * s2io_ethtool_setpause_data - set/reset pause frame generation.
5599 * @sp : private member of the device structure, which is a pointer to the
5600 * s2io_nic structure.
5601 * @ep : pointer to the structure with pause parameters given by ethtool.
5602 * Description:
5603 * It can be used to set or reset Pause frame generation or reception
5604 * support of the NIC.
5605 * Return value:
5606 * int, returns 0 on Success
5607 */
5608
5609 static int s2io_ethtool_setpause_data(struct net_device *dev,
5610 struct ethtool_pauseparam *ep)
5611 {
5612 u64 val64;
5613 struct s2io_nic *sp = netdev_priv(dev);
5614 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5615
5616 val64 = readq(&bar0->rmac_pause_cfg);
5617 if (ep->tx_pause)
5618 val64 |= RMAC_PAUSE_GEN_ENABLE;
5619 else
5620 val64 &= ~RMAC_PAUSE_GEN_ENABLE;
5621 if (ep->rx_pause)
5622 val64 |= RMAC_PAUSE_RX_ENABLE;
5623 else
5624 val64 &= ~RMAC_PAUSE_RX_ENABLE;
5625 writeq(val64, &bar0->rmac_pause_cfg);
5626 return 0;
5627 }
5628
5629 /**
5630 * read_eeprom - reads 4 bytes of data from user given offset.
5631 * @sp : private member of the device structure, which is a pointer to the
5632 * s2io_nic structure.
5633 * @off : offset at which the data must be written
5634 * @data : Its an output parameter where the data read at the given
5635 * offset is stored.
5636 * Description:
5637 * Will read 4 bytes of data from the user given offset and return the
5638 * read data.
5639 * NOTE: Will allow to read only part of the EEPROM visible through the
5640 * I2C bus.
5641 * Return value:
5642 * -1 on failure and 0 on success.
5643 */
5644
5645 #define S2IO_DEV_ID 5
5646 static int read_eeprom(struct s2io_nic *sp, int off, u64 *data)
5647 {
5648 int ret = -1;
5649 u32 exit_cnt = 0;
5650 u64 val64;
5651 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5652
5653 if (sp->device_type == XFRAME_I_DEVICE) {
5654 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) |
5655 I2C_CONTROL_ADDR(off) |
5656 I2C_CONTROL_BYTE_CNT(0x3) |
5657 I2C_CONTROL_READ |
5658 I2C_CONTROL_CNTL_START;
5659 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5660
5661 while (exit_cnt < 5) {
5662 val64 = readq(&bar0->i2c_control);
5663 if (I2C_CONTROL_CNTL_END(val64)) {
5664 *data = I2C_CONTROL_GET_DATA(val64);
5665 ret = 0;
5666 break;
5667 }
5668 msleep(50);
5669 exit_cnt++;
5670 }
5671 }
5672
5673 if (sp->device_type == XFRAME_II_DEVICE) {
5674 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5675 SPI_CONTROL_BYTECNT(0x3) |
5676 SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
5677 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5678 val64 |= SPI_CONTROL_REQ;
5679 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5680 while (exit_cnt < 5) {
5681 val64 = readq(&bar0->spi_control);
5682 if (val64 & SPI_CONTROL_NACK) {
5683 ret = 1;
5684 break;
5685 } else if (val64 & SPI_CONTROL_DONE) {
5686 *data = readq(&bar0->spi_data);
5687 *data &= 0xffffff;
5688 ret = 0;
5689 break;
5690 }
5691 msleep(50);
5692 exit_cnt++;
5693 }
5694 }
5695 return ret;
5696 }
5697
5698 /**
5699 * write_eeprom - actually writes the relevant part of the data value.
5700 * @sp : private member of the device structure, which is a pointer to the
5701 * s2io_nic structure.
5702 * @off : offset at which the data must be written
5703 * @data : The data that is to be written
5704 * @cnt : Number of bytes of the data that are actually to be written into
5705 * the Eeprom. (max of 3)
5706 * Description:
5707 * Actually writes the relevant part of the data value into the Eeprom
5708 * through the I2C bus.
5709 * Return value:
5710 * 0 on success, -1 on failure.
5711 */
5712
5713 static int write_eeprom(struct s2io_nic *sp, int off, u64 data, int cnt)
5714 {
5715 int exit_cnt = 0, ret = -1;
5716 u64 val64;
5717 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5718
5719 if (sp->device_type == XFRAME_I_DEVICE) {
5720 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) |
5721 I2C_CONTROL_ADDR(off) |
5722 I2C_CONTROL_BYTE_CNT(cnt) |
5723 I2C_CONTROL_SET_DATA((u32)data) |
5724 I2C_CONTROL_CNTL_START;
5725 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5726
5727 while (exit_cnt < 5) {
5728 val64 = readq(&bar0->i2c_control);
5729 if (I2C_CONTROL_CNTL_END(val64)) {
5730 if (!(val64 & I2C_CONTROL_NACK))
5731 ret = 0;
5732 break;
5733 }
5734 msleep(50);
5735 exit_cnt++;
5736 }
5737 }
5738
5739 if (sp->device_type == XFRAME_II_DEVICE) {
5740 int write_cnt = (cnt == 8) ? 0 : cnt;
5741 writeq(SPI_DATA_WRITE(data, (cnt << 3)), &bar0->spi_data);
5742
5743 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5744 SPI_CONTROL_BYTECNT(write_cnt) |
5745 SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
5746 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5747 val64 |= SPI_CONTROL_REQ;
5748 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5749 while (exit_cnt < 5) {
5750 val64 = readq(&bar0->spi_control);
5751 if (val64 & SPI_CONTROL_NACK) {
5752 ret = 1;
5753 break;
5754 } else if (val64 & SPI_CONTROL_DONE) {
5755 ret = 0;
5756 break;
5757 }
5758 msleep(50);
5759 exit_cnt++;
5760 }
5761 }
5762 return ret;
5763 }
5764 static void s2io_vpd_read(struct s2io_nic *nic)
5765 {
5766 u8 *vpd_data;
5767 u8 data;
5768 int i = 0, cnt, fail = 0;
5769 int vpd_addr = 0x80;
5770 struct swStat *swstats = &nic->mac_control.stats_info->sw_stat;
5771
5772 if (nic->device_type == XFRAME_II_DEVICE) {
5773 strcpy(nic->product_name, "Xframe II 10GbE network adapter");
5774 vpd_addr = 0x80;
5775 } else {
5776 strcpy(nic->product_name, "Xframe I 10GbE network adapter");
5777 vpd_addr = 0x50;
5778 }
5779 strcpy(nic->serial_num, "NOT AVAILABLE");
5780
5781 vpd_data = kmalloc(256, GFP_KERNEL);
5782 if (!vpd_data) {
5783 swstats->mem_alloc_fail_cnt++;
5784 return;
5785 }
5786 swstats->mem_allocated += 256;
5787
5788 for (i = 0; i < 256; i += 4) {
5789 pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
5790 pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data);
5791 pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
5792 for (cnt = 0; cnt < 5; cnt++) {
5793 msleep(2);
5794 pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
5795 if (data == 0x80)
5796 break;
5797 }
5798 if (cnt >= 5) {
5799 DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
5800 fail = 1;
5801 break;
5802 }
5803 pci_read_config_dword(nic->pdev, (vpd_addr + 4),
5804 (u32 *)&vpd_data[i]);
5805 }
5806
5807 if (!fail) {
5808 /* read serial number of adapter */
5809 for (cnt = 0; cnt < 256; cnt++) {
5810 if ((vpd_data[cnt] == 'S') &&
5811 (vpd_data[cnt+1] == 'N') &&
5812 (vpd_data[cnt+2] < VPD_STRING_LEN)) {
5813 memset(nic->serial_num, 0, VPD_STRING_LEN);
5814 memcpy(nic->serial_num, &vpd_data[cnt + 3],
5815 vpd_data[cnt+2]);
5816 break;
5817 }
5818 }
5819 }
5820
5821 if ((!fail) && (vpd_data[1] < VPD_STRING_LEN))
5822 memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
5823 kfree(vpd_data);
5824 swstats->mem_freed += 256;
5825 }
5826
5827 /**
5828 * s2io_ethtool_geeprom - reads the value stored in the Eeprom.
5829 * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
5830 * @eeprom : pointer to the user level structure provided by ethtool,
5831 * containing all relevant information.
5832 * @data_buf : user defined value to be written into Eeprom.
5833 * Description: Reads the values stored in the Eeprom at given offset
5834 * for a given length. Stores these values int the input argument data
5835 * buffer 'data_buf' and returns these to the caller (ethtool.)
5836 * Return value:
5837 * int 0 on success
5838 */
5839
5840 static int s2io_ethtool_geeprom(struct net_device *dev,
5841 struct ethtool_eeprom *eeprom, u8 * data_buf)
5842 {
5843 u32 i, valid;
5844 u64 data;
5845 struct s2io_nic *sp = netdev_priv(dev);
5846
5847 eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
5848
5849 if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
5850 eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
5851
5852 for (i = 0; i < eeprom->len; i += 4) {
5853 if (read_eeprom(sp, (eeprom->offset + i), &data)) {
5854 DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
5855 return -EFAULT;
5856 }
5857 valid = INV(data);
5858 memcpy((data_buf + i), &valid, 4);
5859 }
5860 return 0;
5861 }
5862
5863 /**
5864 * s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
5865 * @sp : private member of the device structure, which is a pointer to the
5866 * s2io_nic structure.
5867 * @eeprom : pointer to the user level structure provided by ethtool,
5868 * containing all relevant information.
5869 * @data_buf ; user defined value to be written into Eeprom.
5870 * Description:
5871 * Tries to write the user provided value in the Eeprom, at the offset
5872 * given by the user.
5873 * Return value:
5874 * 0 on success, -EFAULT on failure.
5875 */
5876
5877 static int s2io_ethtool_seeprom(struct net_device *dev,
5878 struct ethtool_eeprom *eeprom,
5879 u8 *data_buf)
5880 {
5881 int len = eeprom->len, cnt = 0;
5882 u64 valid = 0, data;
5883 struct s2io_nic *sp = netdev_priv(dev);
5884
5885 if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
5886 DBG_PRINT(ERR_DBG,
5887 "ETHTOOL_WRITE_EEPROM Err: "
5888 "Magic value is wrong, it is 0x%x should be 0x%x\n",
5889 (sp->pdev->vendor | (sp->pdev->device << 16)),
5890 eeprom->magic);
5891 return -EFAULT;
5892 }
5893
5894 while (len) {
5895 data = (u32)data_buf[cnt] & 0x000000FF;
5896 if (data)
5897 valid = (u32)(data << 24);
5898 else
5899 valid = data;
5900
5901 if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
5902 DBG_PRINT(ERR_DBG,
5903 "ETHTOOL_WRITE_EEPROM Err: "
5904 "Cannot write into the specified offset\n");
5905 return -EFAULT;
5906 }
5907 cnt++;
5908 len--;
5909 }
5910
5911 return 0;
5912 }
5913
5914 /**
5915 * s2io_register_test - reads and writes into all clock domains.
5916 * @sp : private member of the device structure, which is a pointer to the
5917 * s2io_nic structure.
5918 * @data : variable that returns the result of each of the test conducted b
5919 * by the driver.
5920 * Description:
5921 * Read and write into all clock domains. The NIC has 3 clock domains,
5922 * see that registers in all the three regions are accessible.
5923 * Return value:
5924 * 0 on success.
5925 */
5926
5927 static int s2io_register_test(struct s2io_nic *sp, uint64_t *data)
5928 {
5929 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5930 u64 val64 = 0, exp_val;
5931 int fail = 0;
5932
5933 val64 = readq(&bar0->pif_rd_swapper_fb);
5934 if (val64 != 0x123456789abcdefULL) {
5935 fail = 1;
5936 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1);
5937 }
5938
5939 val64 = readq(&bar0->rmac_pause_cfg);
5940 if (val64 != 0xc000ffff00000000ULL) {
5941 fail = 1;
5942 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2);
5943 }
5944
5945 val64 = readq(&bar0->rx_queue_cfg);
5946 if (sp->device_type == XFRAME_II_DEVICE)
5947 exp_val = 0x0404040404040404ULL;
5948 else
5949 exp_val = 0x0808080808080808ULL;
5950 if (val64 != exp_val) {
5951 fail = 1;
5952 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3);
5953 }
5954
5955 val64 = readq(&bar0->xgxs_efifo_cfg);
5956 if (val64 != 0x000000001923141EULL) {
5957 fail = 1;
5958 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4);
5959 }
5960
5961 val64 = 0x5A5A5A5A5A5A5A5AULL;
5962 writeq(val64, &bar0->xmsi_data);
5963 val64 = readq(&bar0->xmsi_data);
5964 if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
5965 fail = 1;
5966 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);
5967 }
5968
5969 val64 = 0xA5A5A5A5A5A5A5A5ULL;
5970 writeq(val64, &bar0->xmsi_data);
5971 val64 = readq(&bar0->xmsi_data);
5972 if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
5973 fail = 1;
5974 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);
5975 }
5976
5977 *data = fail;
5978 return fail;
5979 }
5980
5981 /**
5982 * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
5983 * @sp : private member of the device structure, which is a pointer to the
5984 * s2io_nic structure.
5985 * @data:variable that returns the result of each of the test conducted by
5986 * the driver.
5987 * Description:
5988 * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
5989 * register.
5990 * Return value:
5991 * 0 on success.
5992 */
5993
5994 static int s2io_eeprom_test(struct s2io_nic *sp, uint64_t *data)
5995 {
5996 int fail = 0;
5997 u64 ret_data, org_4F0, org_7F0;
5998 u8 saved_4F0 = 0, saved_7F0 = 0;
5999 struct net_device *dev = sp->dev;
6000
6001 /* Test Write Error at offset 0 */
6002 /* Note that SPI interface allows write access to all areas
6003 * of EEPROM. Hence doing all negative testing only for Xframe I.
6004 */
6005 if (sp->device_type == XFRAME_I_DEVICE)
6006 if (!write_eeprom(sp, 0, 0, 3))
6007 fail = 1;
6008
6009 /* Save current values at offsets 0x4F0 and 0x7F0 */
6010 if (!read_eeprom(sp, 0x4F0, &org_4F0))
6011 saved_4F0 = 1;
6012 if (!read_eeprom(sp, 0x7F0, &org_7F0))
6013 saved_7F0 = 1;
6014
6015 /* Test Write at offset 4f0 */
6016 if (write_eeprom(sp, 0x4F0, 0x012345, 3))
6017 fail = 1;
6018 if (read_eeprom(sp, 0x4F0, &ret_data))
6019 fail = 1;
6020
6021 if (ret_data != 0x012345) {
6022 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
6023 "Data written %llx Data read %llx\n",
6024 dev->name, (unsigned long long)0x12345,
6025 (unsigned long long)ret_data);
6026 fail = 1;
6027 }
6028
6029 /* Reset the EEPROM data go FFFF */
6030 write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
6031
6032 /* Test Write Request Error at offset 0x7c */
6033 if (sp->device_type == XFRAME_I_DEVICE)
6034 if (!write_eeprom(sp, 0x07C, 0, 3))
6035 fail = 1;
6036
6037 /* Test Write Request at offset 0x7f0 */
6038 if (write_eeprom(sp, 0x7F0, 0x012345, 3))
6039 fail = 1;
6040 if (read_eeprom(sp, 0x7F0, &ret_data))
6041 fail = 1;
6042
6043 if (ret_data != 0x012345) {
6044 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
6045 "Data written %llx Data read %llx\n",
6046 dev->name, (unsigned long long)0x12345,
6047 (unsigned long long)ret_data);
6048 fail = 1;
6049 }
6050
6051 /* Reset the EEPROM data go FFFF */
6052 write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
6053
6054 if (sp->device_type == XFRAME_I_DEVICE) {
6055 /* Test Write Error at offset 0x80 */
6056 if (!write_eeprom(sp, 0x080, 0, 3))
6057 fail = 1;
6058
6059 /* Test Write Error at offset 0xfc */
6060 if (!write_eeprom(sp, 0x0FC, 0, 3))
6061 fail = 1;
6062
6063 /* Test Write Error at offset 0x100 */
6064 if (!write_eeprom(sp, 0x100, 0, 3))
6065 fail = 1;
6066
6067 /* Test Write Error at offset 4ec */
6068 if (!write_eeprom(sp, 0x4EC, 0, 3))
6069 fail = 1;
6070 }
6071
6072 /* Restore values at offsets 0x4F0 and 0x7F0 */
6073 if (saved_4F0)
6074 write_eeprom(sp, 0x4F0, org_4F0, 3);
6075 if (saved_7F0)
6076 write_eeprom(sp, 0x7F0, org_7F0, 3);
6077
6078 *data = fail;
6079 return fail;
6080 }
6081
6082 /**
6083 * s2io_bist_test - invokes the MemBist test of the card .
6084 * @sp : private member of the device structure, which is a pointer to the
6085 * s2io_nic structure.
6086 * @data:variable that returns the result of each of the test conducted by
6087 * the driver.
6088 * Description:
6089 * This invokes the MemBist test of the card. We give around
6090 * 2 secs time for the Test to complete. If it's still not complete
6091 * within this peiod, we consider that the test failed.
6092 * Return value:
6093 * 0 on success and -1 on failure.
6094 */
6095
6096 static int s2io_bist_test(struct s2io_nic *sp, uint64_t *data)
6097 {
6098 u8 bist = 0;
6099 int cnt = 0, ret = -1;
6100
6101 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6102 bist |= PCI_BIST_START;
6103 pci_write_config_word(sp->pdev, PCI_BIST, bist);
6104
6105 while (cnt < 20) {
6106 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6107 if (!(bist & PCI_BIST_START)) {
6108 *data = (bist & PCI_BIST_CODE_MASK);
6109 ret = 0;
6110 break;
6111 }
6112 msleep(100);
6113 cnt++;
6114 }
6115
6116 return ret;
6117 }
6118
6119 /**
6120 * s2io-link_test - verifies the link state of the nic
6121 * @sp ; private member of the device structure, which is a pointer to the
6122 * s2io_nic structure.
6123 * @data: variable that returns the result of each of the test conducted by
6124 * the driver.
6125 * Description:
6126 * The function verifies the link state of the NIC and updates the input
6127 * argument 'data' appropriately.
6128 * Return value:
6129 * 0 on success.
6130 */
6131
6132 static int s2io_link_test(struct s2io_nic *sp, uint64_t *data)
6133 {
6134 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6135 u64 val64;
6136
6137 val64 = readq(&bar0->adapter_status);
6138 if (!(LINK_IS_UP(val64)))
6139 *data = 1;
6140 else
6141 *data = 0;
6142
6143 return *data;
6144 }
6145
6146 /**
6147 * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
6148 * @sp - private member of the device structure, which is a pointer to the
6149 * s2io_nic structure.
6150 * @data - variable that returns the result of each of the test
6151 * conducted by the driver.
6152 * Description:
6153 * This is one of the offline test that tests the read and write
6154 * access to the RldRam chip on the NIC.
6155 * Return value:
6156 * 0 on success.
6157 */
6158
6159 static int s2io_rldram_test(struct s2io_nic *sp, uint64_t *data)
6160 {
6161 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6162 u64 val64;
6163 int cnt, iteration = 0, test_fail = 0;
6164
6165 val64 = readq(&bar0->adapter_control);
6166 val64 &= ~ADAPTER_ECC_EN;
6167 writeq(val64, &bar0->adapter_control);
6168
6169 val64 = readq(&bar0->mc_rldram_test_ctrl);
6170 val64 |= MC_RLDRAM_TEST_MODE;
6171 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6172
6173 val64 = readq(&bar0->mc_rldram_mrs);
6174 val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
6175 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6176
6177 val64 |= MC_RLDRAM_MRS_ENABLE;
6178 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6179
6180 while (iteration < 2) {
6181 val64 = 0x55555555aaaa0000ULL;
6182 if (iteration == 1)
6183 val64 ^= 0xFFFFFFFFFFFF0000ULL;
6184 writeq(val64, &bar0->mc_rldram_test_d0);
6185
6186 val64 = 0xaaaa5a5555550000ULL;
6187 if (iteration == 1)
6188 val64 ^= 0xFFFFFFFFFFFF0000ULL;
6189 writeq(val64, &bar0->mc_rldram_test_d1);
6190
6191 val64 = 0x55aaaaaaaa5a0000ULL;
6192 if (iteration == 1)
6193 val64 ^= 0xFFFFFFFFFFFF0000ULL;
6194 writeq(val64, &bar0->mc_rldram_test_d2);
6195
6196 val64 = (u64) (0x0000003ffffe0100ULL);
6197 writeq(val64, &bar0->mc_rldram_test_add);
6198
6199 val64 = MC_RLDRAM_TEST_MODE |
6200 MC_RLDRAM_TEST_WRITE |
6201 MC_RLDRAM_TEST_GO;
6202 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6203
6204 for (cnt = 0; cnt < 5; cnt++) {
6205 val64 = readq(&bar0->mc_rldram_test_ctrl);
6206 if (val64 & MC_RLDRAM_TEST_DONE)
6207 break;
6208 msleep(200);
6209 }
6210
6211 if (cnt == 5)
6212 break;
6213
6214 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
6215 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6216
6217 for (cnt = 0; cnt < 5; cnt++) {
6218 val64 = readq(&bar0->mc_rldram_test_ctrl);
6219 if (val64 & MC_RLDRAM_TEST_DONE)
6220 break;
6221 msleep(500);
6222 }
6223
6224 if (cnt == 5)
6225 break;
6226
6227 val64 = readq(&bar0->mc_rldram_test_ctrl);
6228 if (!(val64 & MC_RLDRAM_TEST_PASS))
6229 test_fail = 1;
6230
6231 iteration++;
6232 }
6233
6234 *data = test_fail;
6235
6236 /* Bring the adapter out of test mode */
6237 SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
6238
6239 return test_fail;
6240 }
6241
6242 /**
6243 * s2io_ethtool_test - conducts 6 tsets to determine the health of card.
6244 * @sp : private member of the device structure, which is a pointer to the
6245 * s2io_nic structure.
6246 * @ethtest : pointer to a ethtool command specific structure that will be
6247 * returned to the user.
6248 * @data : variable that returns the result of each of the test
6249 * conducted by the driver.
6250 * Description:
6251 * This function conducts 6 tests ( 4 offline and 2 online) to determine
6252 * the health of the card.
6253 * Return value:
6254 * void
6255 */
6256
6257 static void s2io_ethtool_test(struct net_device *dev,
6258 struct ethtool_test *ethtest,
6259 uint64_t *data)
6260 {
6261 struct s2io_nic *sp = netdev_priv(dev);
6262 int orig_state = netif_running(sp->dev);
6263
6264 if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
6265 /* Offline Tests. */
6266 if (orig_state)
6267 s2io_close(sp->dev);
6268
6269 if (s2io_register_test(sp, &data[0]))
6270 ethtest->flags |= ETH_TEST_FL_FAILED;
6271
6272 s2io_reset(sp);
6273
6274 if (s2io_rldram_test(sp, &data[3]))
6275 ethtest->flags |= ETH_TEST_FL_FAILED;
6276
6277 s2io_reset(sp);
6278
6279 if (s2io_eeprom_test(sp, &data[1]))
6280 ethtest->flags |= ETH_TEST_FL_FAILED;
6281
6282 if (s2io_bist_test(sp, &data[4]))
6283 ethtest->flags |= ETH_TEST_FL_FAILED;
6284
6285 if (orig_state)
6286 s2io_open(sp->dev);
6287
6288 data[2] = 0;
6289 } else {
6290 /* Online Tests. */
6291 if (!orig_state) {
6292 DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",
6293 dev->name);
6294 data[0] = -1;
6295 data[1] = -1;
6296 data[2] = -1;
6297 data[3] = -1;
6298 data[4] = -1;
6299 }
6300
6301 if (s2io_link_test(sp, &data[2]))
6302 ethtest->flags |= ETH_TEST_FL_FAILED;
6303
6304 data[0] = 0;
6305 data[1] = 0;
6306 data[3] = 0;
6307 data[4] = 0;
6308 }
6309 }
6310
6311 static void s2io_get_ethtool_stats(struct net_device *dev,
6312 struct ethtool_stats *estats,
6313 u64 *tmp_stats)
6314 {
6315 int i = 0, k;
6316 struct s2io_nic *sp = netdev_priv(dev);
6317 struct stat_block *stats = sp->mac_control.stats_info;
6318 struct swStat *swstats = &stats->sw_stat;
6319 struct xpakStat *xstats = &stats->xpak_stat;
6320
6321 s2io_updt_stats(sp);
6322 tmp_stats[i++] =
6323 (u64)le32_to_cpu(stats->tmac_frms_oflow) << 32 |
6324 le32_to_cpu(stats->tmac_frms);
6325 tmp_stats[i++] =
6326 (u64)le32_to_cpu(stats->tmac_data_octets_oflow) << 32 |
6327 le32_to_cpu(stats->tmac_data_octets);
6328 tmp_stats[i++] = le64_to_cpu(stats->tmac_drop_frms);
6329 tmp_stats[i++] =
6330 (u64)le32_to_cpu(stats->tmac_mcst_frms_oflow) << 32 |
6331 le32_to_cpu(stats->tmac_mcst_frms);
6332 tmp_stats[i++] =
6333 (u64)le32_to_cpu(stats->tmac_bcst_frms_oflow) << 32 |
6334 le32_to_cpu(stats->tmac_bcst_frms);
6335 tmp_stats[i++] = le64_to_cpu(stats->tmac_pause_ctrl_frms);
6336 tmp_stats[i++] =
6337 (u64)le32_to_cpu(stats->tmac_ttl_octets_oflow) << 32 |
6338 le32_to_cpu(stats->tmac_ttl_octets);
6339 tmp_stats[i++] =
6340 (u64)le32_to_cpu(stats->tmac_ucst_frms_oflow) << 32 |
6341 le32_to_cpu(stats->tmac_ucst_frms);
6342 tmp_stats[i++] =
6343 (u64)le32_to_cpu(stats->tmac_nucst_frms_oflow) << 32 |
6344 le32_to_cpu(stats->tmac_nucst_frms);
6345 tmp_stats[i++] =
6346 (u64)le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 |
6347 le32_to_cpu(stats->tmac_any_err_frms);
6348 tmp_stats[i++] = le64_to_cpu(stats->tmac_ttl_less_fb_octets);
6349 tmp_stats[i++] = le64_to_cpu(stats->tmac_vld_ip_octets);
6350 tmp_stats[i++] =
6351 (u64)le32_to_cpu(stats->tmac_vld_ip_oflow) << 32 |
6352 le32_to_cpu(stats->tmac_vld_ip);
6353 tmp_stats[i++] =
6354 (u64)le32_to_cpu(stats->tmac_drop_ip_oflow) << 32 |
6355 le32_to_cpu(stats->tmac_drop_ip);
6356 tmp_stats[i++] =
6357 (u64)le32_to_cpu(stats->tmac_icmp_oflow) << 32 |
6358 le32_to_cpu(stats->tmac_icmp);
6359 tmp_stats[i++] =
6360 (u64)le32_to_cpu(stats->tmac_rst_tcp_oflow) << 32 |
6361 le32_to_cpu(stats->tmac_rst_tcp);
6362 tmp_stats[i++] = le64_to_cpu(stats->tmac_tcp);
6363 tmp_stats[i++] = (u64)le32_to_cpu(stats->tmac_udp_oflow) << 32 |
6364 le32_to_cpu(stats->tmac_udp);
6365 tmp_stats[i++] =
6366 (u64)le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 |
6367 le32_to_cpu(stats->rmac_vld_frms);
6368 tmp_stats[i++] =
6369 (u64)le32_to_cpu(stats->rmac_data_octets_oflow) << 32 |
6370 le32_to_cpu(stats->rmac_data_octets);
6371 tmp_stats[i++] = le64_to_cpu(stats->rmac_fcs_err_frms);
6372 tmp_stats[i++] = le64_to_cpu(stats->rmac_drop_frms);
6373 tmp_stats[i++] =
6374 (u64)le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 |
6375 le32_to_cpu(stats->rmac_vld_mcst_frms);
6376 tmp_stats[i++] =
6377 (u64)le32_to_cpu(stats->rmac_vld_bcst_frms_oflow) << 32 |
6378 le32_to_cpu(stats->rmac_vld_bcst_frms);
6379 tmp_stats[i++] = le32_to_cpu(stats->rmac_in_rng_len_err_frms);
6380 tmp_stats[i++] = le32_to_cpu(stats->rmac_out_rng_len_err_frms);
6381 tmp_stats[i++] = le64_to_cpu(stats->rmac_long_frms);
6382 tmp_stats[i++] = le64_to_cpu(stats->rmac_pause_ctrl_frms);
6383 tmp_stats[i++] = le64_to_cpu(stats->rmac_unsup_ctrl_frms);
6384 tmp_stats[i++] =
6385 (u64)le32_to_cpu(stats->rmac_ttl_octets_oflow) << 32 |
6386 le32_to_cpu(stats->rmac_ttl_octets);
6387 tmp_stats[i++] =
6388 (u64)le32_to_cpu(stats->rmac_accepted_ucst_frms_oflow) << 32
6389 | le32_to_cpu(stats->rmac_accepted_ucst_frms);
6390 tmp_stats[i++] =
6391 (u64)le32_to_cpu(stats->rmac_accepted_nucst_frms_oflow)
6392 << 32 | le32_to_cpu(stats->rmac_accepted_nucst_frms);
6393 tmp_stats[i++] =
6394 (u64)le32_to_cpu(stats->rmac_discarded_frms_oflow) << 32 |
6395 le32_to_cpu(stats->rmac_discarded_frms);
6396 tmp_stats[i++] =
6397 (u64)le32_to_cpu(stats->rmac_drop_events_oflow)
6398 << 32 | le32_to_cpu(stats->rmac_drop_events);
6399 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_less_fb_octets);
6400 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_frms);
6401 tmp_stats[i++] =
6402 (u64)le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 |
6403 le32_to_cpu(stats->rmac_usized_frms);
6404 tmp_stats[i++] =
6405 (u64)le32_to_cpu(stats->rmac_osized_frms_oflow) << 32 |
6406 le32_to_cpu(stats->rmac_osized_frms);
6407 tmp_stats[i++] =
6408 (u64)le32_to_cpu(stats->rmac_frag_frms_oflow) << 32 |
6409 le32_to_cpu(stats->rmac_frag_frms);
6410 tmp_stats[i++] =
6411 (u64)le32_to_cpu(stats->rmac_jabber_frms_oflow) << 32 |
6412 le32_to_cpu(stats->rmac_jabber_frms);
6413 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_64_frms);
6414 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_65_127_frms);
6415 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_128_255_frms);
6416 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_256_511_frms);
6417 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_512_1023_frms);
6418 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_1024_1518_frms);
6419 tmp_stats[i++] =
6420 (u64)le32_to_cpu(stats->rmac_ip_oflow) << 32 |
6421 le32_to_cpu(stats->rmac_ip);
6422 tmp_stats[i++] = le64_to_cpu(stats->rmac_ip_octets);
6423 tmp_stats[i++] = le32_to_cpu(stats->rmac_hdr_err_ip);
6424 tmp_stats[i++] =
6425 (u64)le32_to_cpu(stats->rmac_drop_ip_oflow) << 32 |
6426 le32_to_cpu(stats->rmac_drop_ip);
6427 tmp_stats[i++] =
6428 (u64)le32_to_cpu(stats->rmac_icmp_oflow) << 32 |
6429 le32_to_cpu(stats->rmac_icmp);
6430 tmp_stats[i++] = le64_to_cpu(stats->rmac_tcp);
6431 tmp_stats[i++] =
6432 (u64)le32_to_cpu(stats->rmac_udp_oflow) << 32 |
6433 le32_to_cpu(stats->rmac_udp);
6434 tmp_stats[i++] =
6435 (u64)le32_to_cpu(stats->rmac_err_drp_udp_oflow) << 32 |
6436 le32_to_cpu(stats->rmac_err_drp_udp);
6437 tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_err_sym);
6438 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q0);
6439 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q1);
6440 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q2);
6441 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q3);
6442 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q4);
6443 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q5);
6444 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q6);
6445 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q7);
6446 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q0);
6447 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q1);
6448 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q2);
6449 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q3);
6450 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q4);
6451 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q5);
6452 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q6);
6453 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q7);
6454 tmp_stats[i++] =
6455 (u64)le32_to_cpu(stats->rmac_pause_cnt_oflow) << 32 |
6456 le32_to_cpu(stats->rmac_pause_cnt);
6457 tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_data_err_cnt);
6458 tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_ctrl_err_cnt);
6459 tmp_stats[i++] =
6460 (u64)le32_to_cpu(stats->rmac_accepted_ip_oflow) << 32 |
6461 le32_to_cpu(stats->rmac_accepted_ip);
6462 tmp_stats[i++] = le32_to_cpu(stats->rmac_err_tcp);
6463 tmp_stats[i++] = le32_to_cpu(stats->rd_req_cnt);
6464 tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_cnt);
6465 tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_rtry_cnt);
6466 tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_cnt);
6467 tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_rd_ack_cnt);
6468 tmp_stats[i++] = le32_to_cpu(stats->wr_req_cnt);
6469 tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_cnt);
6470 tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_rtry_cnt);
6471 tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_cnt);
6472 tmp_stats[i++] = le32_to_cpu(stats->wr_disc_cnt);
6473 tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_wr_ack_cnt);
6474 tmp_stats[i++] = le32_to_cpu(stats->txp_wr_cnt);
6475 tmp_stats[i++] = le32_to_cpu(stats->txd_rd_cnt);
6476 tmp_stats[i++] = le32_to_cpu(stats->txd_wr_cnt);
6477 tmp_stats[i++] = le32_to_cpu(stats->rxd_rd_cnt);
6478 tmp_stats[i++] = le32_to_cpu(stats->rxd_wr_cnt);
6479 tmp_stats[i++] = le32_to_cpu(stats->txf_rd_cnt);
6480 tmp_stats[i++] = le32_to_cpu(stats->rxf_wr_cnt);
6481
6482 /* Enhanced statistics exist only for Hercules */
6483 if (sp->device_type == XFRAME_II_DEVICE) {
6484 tmp_stats[i++] =
6485 le64_to_cpu(stats->rmac_ttl_1519_4095_frms);
6486 tmp_stats[i++] =
6487 le64_to_cpu(stats->rmac_ttl_4096_8191_frms);
6488 tmp_stats[i++] =
6489 le64_to_cpu(stats->rmac_ttl_8192_max_frms);
6490 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_gt_max_frms);
6491 tmp_stats[i++] = le64_to_cpu(stats->rmac_osized_alt_frms);
6492 tmp_stats[i++] = le64_to_cpu(stats->rmac_jabber_alt_frms);
6493 tmp_stats[i++] = le64_to_cpu(stats->rmac_gt_max_alt_frms);
6494 tmp_stats[i++] = le64_to_cpu(stats->rmac_vlan_frms);
6495 tmp_stats[i++] = le32_to_cpu(stats->rmac_len_discard);
6496 tmp_stats[i++] = le32_to_cpu(stats->rmac_fcs_discard);
6497 tmp_stats[i++] = le32_to_cpu(stats->rmac_pf_discard);
6498 tmp_stats[i++] = le32_to_cpu(stats->rmac_da_discard);
6499 tmp_stats[i++] = le32_to_cpu(stats->rmac_red_discard);
6500 tmp_stats[i++] = le32_to_cpu(stats->rmac_rts_discard);
6501 tmp_stats[i++] = le32_to_cpu(stats->rmac_ingm_full_discard);
6502 tmp_stats[i++] = le32_to_cpu(stats->link_fault_cnt);
6503 }
6504
6505 tmp_stats[i++] = 0;
6506 tmp_stats[i++] = swstats->single_ecc_errs;
6507 tmp_stats[i++] = swstats->double_ecc_errs;
6508 tmp_stats[i++] = swstats->parity_err_cnt;
6509 tmp_stats[i++] = swstats->serious_err_cnt;
6510 tmp_stats[i++] = swstats->soft_reset_cnt;
6511 tmp_stats[i++] = swstats->fifo_full_cnt;
6512 for (k = 0; k < MAX_RX_RINGS; k++)
6513 tmp_stats[i++] = swstats->ring_full_cnt[k];
6514 tmp_stats[i++] = xstats->alarm_transceiver_temp_high;
6515 tmp_stats[i++] = xstats->alarm_transceiver_temp_low;
6516 tmp_stats[i++] = xstats->alarm_laser_bias_current_high;
6517 tmp_stats[i++] = xstats->alarm_laser_bias_current_low;
6518 tmp_stats[i++] = xstats->alarm_laser_output_power_high;
6519 tmp_stats[i++] = xstats->alarm_laser_output_power_low;
6520 tmp_stats[i++] = xstats->warn_transceiver_temp_high;
6521 tmp_stats[i++] = xstats->warn_transceiver_temp_low;
6522 tmp_stats[i++] = xstats->warn_laser_bias_current_high;
6523 tmp_stats[i++] = xstats->warn_laser_bias_current_low;
6524 tmp_stats[i++] = xstats->warn_laser_output_power_high;
6525 tmp_stats[i++] = xstats->warn_laser_output_power_low;
6526 tmp_stats[i++] = swstats->clubbed_frms_cnt;
6527 tmp_stats[i++] = swstats->sending_both;
6528 tmp_stats[i++] = swstats->outof_sequence_pkts;
6529 tmp_stats[i++] = swstats->flush_max_pkts;
6530 if (swstats->num_aggregations) {
6531 u64 tmp = swstats->sum_avg_pkts_aggregated;
6532 int count = 0;
6533 /*
6534 * Since 64-bit divide does not work on all platforms,
6535 * do repeated subtraction.
6536 */
6537 while (tmp >= swstats->num_aggregations) {
6538 tmp -= swstats->num_aggregations;
6539 count++;
6540 }
6541 tmp_stats[i++] = count;
6542 } else
6543 tmp_stats[i++] = 0;
6544 tmp_stats[i++] = swstats->mem_alloc_fail_cnt;
6545 tmp_stats[i++] = swstats->pci_map_fail_cnt;
6546 tmp_stats[i++] = swstats->watchdog_timer_cnt;
6547 tmp_stats[i++] = swstats->mem_allocated;
6548 tmp_stats[i++] = swstats->mem_freed;
6549 tmp_stats[i++] = swstats->link_up_cnt;
6550 tmp_stats[i++] = swstats->link_down_cnt;
6551 tmp_stats[i++] = swstats->link_up_time;
6552 tmp_stats[i++] = swstats->link_down_time;
6553
6554 tmp_stats[i++] = swstats->tx_buf_abort_cnt;
6555 tmp_stats[i++] = swstats->tx_desc_abort_cnt;
6556 tmp_stats[i++] = swstats->tx_parity_err_cnt;
6557 tmp_stats[i++] = swstats->tx_link_loss_cnt;
6558 tmp_stats[i++] = swstats->tx_list_proc_err_cnt;
6559
6560 tmp_stats[i++] = swstats->rx_parity_err_cnt;
6561 tmp_stats[i++] = swstats->rx_abort_cnt;
6562 tmp_stats[i++] = swstats->rx_parity_abort_cnt;
6563 tmp_stats[i++] = swstats->rx_rda_fail_cnt;
6564 tmp_stats[i++] = swstats->rx_unkn_prot_cnt;
6565 tmp_stats[i++] = swstats->rx_fcs_err_cnt;
6566 tmp_stats[i++] = swstats->rx_buf_size_err_cnt;
6567 tmp_stats[i++] = swstats->rx_rxd_corrupt_cnt;
6568 tmp_stats[i++] = swstats->rx_unkn_err_cnt;
6569 tmp_stats[i++] = swstats->tda_err_cnt;
6570 tmp_stats[i++] = swstats->pfc_err_cnt;
6571 tmp_stats[i++] = swstats->pcc_err_cnt;
6572 tmp_stats[i++] = swstats->tti_err_cnt;
6573 tmp_stats[i++] = swstats->tpa_err_cnt;
6574 tmp_stats[i++] = swstats->sm_err_cnt;
6575 tmp_stats[i++] = swstats->lso_err_cnt;
6576 tmp_stats[i++] = swstats->mac_tmac_err_cnt;
6577 tmp_stats[i++] = swstats->mac_rmac_err_cnt;
6578 tmp_stats[i++] = swstats->xgxs_txgxs_err_cnt;
6579 tmp_stats[i++] = swstats->xgxs_rxgxs_err_cnt;
6580 tmp_stats[i++] = swstats->rc_err_cnt;
6581 tmp_stats[i++] = swstats->prc_pcix_err_cnt;
6582 tmp_stats[i++] = swstats->rpa_err_cnt;
6583 tmp_stats[i++] = swstats->rda_err_cnt;
6584 tmp_stats[i++] = swstats->rti_err_cnt;
6585 tmp_stats[i++] = swstats->mc_err_cnt;
6586 }
6587
6588 static int s2io_ethtool_get_regs_len(struct net_device *dev)
6589 {
6590 return XENA_REG_SPACE;
6591 }
6592
6593
6594 static u32 s2io_ethtool_get_rx_csum(struct net_device *dev)
6595 {
6596 struct s2io_nic *sp = netdev_priv(dev);
6597
6598 return sp->rx_csum;
6599 }
6600
6601 static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
6602 {
6603 struct s2io_nic *sp = netdev_priv(dev);
6604
6605 if (data)
6606 sp->rx_csum = 1;
6607 else
6608 sp->rx_csum = 0;
6609
6610 return 0;
6611 }
6612
6613 static int s2io_get_eeprom_len(struct net_device *dev)
6614 {
6615 return XENA_EEPROM_SPACE;
6616 }
6617
6618 static int s2io_get_sset_count(struct net_device *dev, int sset)
6619 {
6620 struct s2io_nic *sp = netdev_priv(dev);
6621
6622 switch (sset) {
6623 case ETH_SS_TEST:
6624 return S2IO_TEST_LEN;
6625 case ETH_SS_STATS:
6626 switch (sp->device_type) {
6627 case XFRAME_I_DEVICE:
6628 return XFRAME_I_STAT_LEN;
6629 case XFRAME_II_DEVICE:
6630 return XFRAME_II_STAT_LEN;
6631 default:
6632 return 0;
6633 }
6634 default:
6635 return -EOPNOTSUPP;
6636 }
6637 }
6638
6639 static void s2io_ethtool_get_strings(struct net_device *dev,
6640 u32 stringset, u8 *data)
6641 {
6642 int stat_size = 0;
6643 struct s2io_nic *sp = netdev_priv(dev);
6644
6645 switch (stringset) {
6646 case ETH_SS_TEST:
6647 memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
6648 break;
6649 case ETH_SS_STATS:
6650 stat_size = sizeof(ethtool_xena_stats_keys);
6651 memcpy(data, &ethtool_xena_stats_keys, stat_size);
6652 if (sp->device_type == XFRAME_II_DEVICE) {
6653 memcpy(data + stat_size,
6654 &ethtool_enhanced_stats_keys,
6655 sizeof(ethtool_enhanced_stats_keys));
6656 stat_size += sizeof(ethtool_enhanced_stats_keys);
6657 }
6658
6659 memcpy(data + stat_size, &ethtool_driver_stats_keys,
6660 sizeof(ethtool_driver_stats_keys));
6661 }
6662 }
6663
6664 static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
6665 {
6666 if (data)
6667 dev->features |= NETIF_F_IP_CSUM;
6668 else
6669 dev->features &= ~NETIF_F_IP_CSUM;
6670
6671 return 0;
6672 }
6673
6674 static u32 s2io_ethtool_op_get_tso(struct net_device *dev)
6675 {
6676 return (dev->features & NETIF_F_TSO) != 0;
6677 }
6678 static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data)
6679 {
6680 if (data)
6681 dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
6682 else
6683 dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
6684
6685 return 0;
6686 }
6687
6688 static const struct ethtool_ops netdev_ethtool_ops = {
6689 .get_settings = s2io_ethtool_gset,
6690 .set_settings = s2io_ethtool_sset,
6691 .get_drvinfo = s2io_ethtool_gdrvinfo,
6692 .get_regs_len = s2io_ethtool_get_regs_len,
6693 .get_regs = s2io_ethtool_gregs,
6694 .get_link = ethtool_op_get_link,
6695 .get_eeprom_len = s2io_get_eeprom_len,
6696 .get_eeprom = s2io_ethtool_geeprom,
6697 .set_eeprom = s2io_ethtool_seeprom,
6698 .get_ringparam = s2io_ethtool_gringparam,
6699 .get_pauseparam = s2io_ethtool_getpause_data,
6700 .set_pauseparam = s2io_ethtool_setpause_data,
6701 .get_rx_csum = s2io_ethtool_get_rx_csum,
6702 .set_rx_csum = s2io_ethtool_set_rx_csum,
6703 .set_tx_csum = s2io_ethtool_op_set_tx_csum,
6704 .set_sg = ethtool_op_set_sg,
6705 .get_tso = s2io_ethtool_op_get_tso,
6706 .set_tso = s2io_ethtool_op_set_tso,
6707 .set_ufo = ethtool_op_set_ufo,
6708 .self_test = s2io_ethtool_test,
6709 .get_strings = s2io_ethtool_get_strings,
6710 .phys_id = s2io_ethtool_idnic,
6711 .get_ethtool_stats = s2io_get_ethtool_stats,
6712 .get_sset_count = s2io_get_sset_count,
6713 };
6714
6715 /**
6716 * s2io_ioctl - Entry point for the Ioctl
6717 * @dev : Device pointer.
6718 * @ifr : An IOCTL specefic structure, that can contain a pointer to
6719 * a proprietary structure used to pass information to the driver.
6720 * @cmd : This is used to distinguish between the different commands that
6721 * can be passed to the IOCTL functions.
6722 * Description:
6723 * Currently there are no special functionality supported in IOCTL, hence
6724 * function always return EOPNOTSUPPORTED
6725 */
6726
6727 static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
6728 {
6729 return -EOPNOTSUPP;
6730 }
6731
6732 /**
6733 * s2io_change_mtu - entry point to change MTU size for the device.
6734 * @dev : device pointer.
6735 * @new_mtu : the new MTU size for the device.
6736 * Description: A driver entry point to change MTU size for the device.
6737 * Before changing the MTU the device must be stopped.
6738 * Return value:
6739 * 0 on success and an appropriate (-)ve integer as defined in errno.h
6740 * file on failure.
6741 */
6742
6743 static int s2io_change_mtu(struct net_device *dev, int new_mtu)
6744 {
6745 struct s2io_nic *sp = netdev_priv(dev);
6746 int ret = 0;
6747
6748 if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
6749 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", dev->name);
6750 return -EPERM;
6751 }
6752
6753 dev->mtu = new_mtu;
6754 if (netif_running(dev)) {
6755 s2io_stop_all_tx_queue(sp);
6756 s2io_card_down(sp);
6757 ret = s2io_card_up(sp);
6758 if (ret) {
6759 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
6760 __func__);
6761 return ret;
6762 }
6763 s2io_wake_all_tx_queue(sp);
6764 } else { /* Device is down */
6765 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6766 u64 val64 = new_mtu;
6767
6768 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
6769 }
6770
6771 return ret;
6772 }
6773
6774 /**
6775 * s2io_set_link - Set the LInk status
6776 * @data: long pointer to device private structue
6777 * Description: Sets the link status for the adapter
6778 */
6779
6780 static void s2io_set_link(struct work_struct *work)
6781 {
6782 struct s2io_nic *nic = container_of(work, struct s2io_nic,
6783 set_link_task);
6784 struct net_device *dev = nic->dev;
6785 struct XENA_dev_config __iomem *bar0 = nic->bar0;
6786 register u64 val64;
6787 u16 subid;
6788
6789 rtnl_lock();
6790
6791 if (!netif_running(dev))
6792 goto out_unlock;
6793
6794 if (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(nic->state))) {
6795 /* The card is being reset, no point doing anything */
6796 goto out_unlock;
6797 }
6798
6799 subid = nic->pdev->subsystem_device;
6800 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
6801 /*
6802 * Allow a small delay for the NICs self initiated
6803 * cleanup to complete.
6804 */
6805 msleep(100);
6806 }
6807
6808 val64 = readq(&bar0->adapter_status);
6809 if (LINK_IS_UP(val64)) {
6810 if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) {
6811 if (verify_xena_quiescence(nic)) {
6812 val64 = readq(&bar0->adapter_control);
6813 val64 |= ADAPTER_CNTL_EN;
6814 writeq(val64, &bar0->adapter_control);
6815 if (CARDS_WITH_FAULTY_LINK_INDICATORS(
6816 nic->device_type, subid)) {
6817 val64 = readq(&bar0->gpio_control);
6818 val64 |= GPIO_CTRL_GPIO_0;
6819 writeq(val64, &bar0->gpio_control);
6820 val64 = readq(&bar0->gpio_control);
6821 } else {
6822 val64 |= ADAPTER_LED_ON;
6823 writeq(val64, &bar0->adapter_control);
6824 }
6825 nic->device_enabled_once = true;
6826 } else {
6827 DBG_PRINT(ERR_DBG,
6828 "%s: Error: device is not Quiescent\n",
6829 dev->name);
6830 s2io_stop_all_tx_queue(nic);
6831 }
6832 }
6833 val64 = readq(&bar0->adapter_control);
6834 val64 |= ADAPTER_LED_ON;
6835 writeq(val64, &bar0->adapter_control);
6836 s2io_link(nic, LINK_UP);
6837 } else {
6838 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
6839 subid)) {
6840 val64 = readq(&bar0->gpio_control);
6841 val64 &= ~GPIO_CTRL_GPIO_0;
6842 writeq(val64, &bar0->gpio_control);
6843 val64 = readq(&bar0->gpio_control);
6844 }
6845 /* turn off LED */
6846 val64 = readq(&bar0->adapter_control);
6847 val64 = val64 & (~ADAPTER_LED_ON);
6848 writeq(val64, &bar0->adapter_control);
6849 s2io_link(nic, LINK_DOWN);
6850 }
6851 clear_bit(__S2IO_STATE_LINK_TASK, &(nic->state));
6852
6853 out_unlock:
6854 rtnl_unlock();
6855 }
6856
6857 static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
6858 struct buffAdd *ba,
6859 struct sk_buff **skb, u64 *temp0, u64 *temp1,
6860 u64 *temp2, int size)
6861 {
6862 struct net_device *dev = sp->dev;
6863 struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
6864
6865 if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) {
6866 struct RxD1 *rxdp1 = (struct RxD1 *)rxdp;
6867 /* allocate skb */
6868 if (*skb) {
6869 DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
6870 /*
6871 * As Rx frame are not going to be processed,
6872 * using same mapped address for the Rxd
6873 * buffer pointer
6874 */
6875 rxdp1->Buffer0_ptr = *temp0;
6876 } else {
6877 *skb = dev_alloc_skb(size);
6878 if (!(*skb)) {
6879 DBG_PRINT(INFO_DBG,
6880 "%s: Out of memory to allocate %s\n",
6881 dev->name, "1 buf mode SKBs");
6882 stats->mem_alloc_fail_cnt++;
6883 return -ENOMEM ;
6884 }
6885 stats->mem_allocated += (*skb)->truesize;
6886 /* storing the mapped addr in a temp variable
6887 * such it will be used for next rxd whose
6888 * Host Control is NULL
6889 */
6890 rxdp1->Buffer0_ptr = *temp0 =
6891 pci_map_single(sp->pdev, (*skb)->data,
6892 size - NET_IP_ALIGN,
6893 PCI_DMA_FROMDEVICE);
6894 if (pci_dma_mapping_error(sp->pdev, rxdp1->Buffer0_ptr))
6895 goto memalloc_failed;
6896 rxdp->Host_Control = (unsigned long) (*skb);
6897 }
6898 } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
6899 struct RxD3 *rxdp3 = (struct RxD3 *)rxdp;
6900 /* Two buffer Mode */
6901 if (*skb) {
6902 rxdp3->Buffer2_ptr = *temp2;
6903 rxdp3->Buffer0_ptr = *temp0;
6904 rxdp3->Buffer1_ptr = *temp1;
6905 } else {
6906 *skb = dev_alloc_skb(size);
6907 if (!(*skb)) {
6908 DBG_PRINT(INFO_DBG,
6909 "%s: Out of memory to allocate %s\n",
6910 dev->name,
6911 "2 buf mode SKBs");
6912 stats->mem_alloc_fail_cnt++;
6913 return -ENOMEM;
6914 }
6915 stats->mem_allocated += (*skb)->truesize;
6916 rxdp3->Buffer2_ptr = *temp2 =
6917 pci_map_single(sp->pdev, (*skb)->data,
6918 dev->mtu + 4,
6919 PCI_DMA_FROMDEVICE);
6920 if (pci_dma_mapping_error(sp->pdev, rxdp3->Buffer2_ptr))
6921 goto memalloc_failed;
6922 rxdp3->Buffer0_ptr = *temp0 =
6923 pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
6924 PCI_DMA_FROMDEVICE);
6925 if (pci_dma_mapping_error(sp->pdev,
6926 rxdp3->Buffer0_ptr)) {
6927 pci_unmap_single(sp->pdev,
6928 (dma_addr_t)rxdp3->Buffer2_ptr,
6929 dev->mtu + 4,
6930 PCI_DMA_FROMDEVICE);
6931 goto memalloc_failed;
6932 }
6933 rxdp->Host_Control = (unsigned long) (*skb);
6934
6935 /* Buffer-1 will be dummy buffer not used */
6936 rxdp3->Buffer1_ptr = *temp1 =
6937 pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
6938 PCI_DMA_FROMDEVICE);
6939 if (pci_dma_mapping_error(sp->pdev,
6940 rxdp3->Buffer1_ptr)) {
6941 pci_unmap_single(sp->pdev,
6942 (dma_addr_t)rxdp3->Buffer0_ptr,
6943 BUF0_LEN, PCI_DMA_FROMDEVICE);
6944 pci_unmap_single(sp->pdev,
6945 (dma_addr_t)rxdp3->Buffer2_ptr,
6946 dev->mtu + 4,
6947 PCI_DMA_FROMDEVICE);
6948 goto memalloc_failed;
6949 }
6950 }
6951 }
6952 return 0;
6953
6954 memalloc_failed:
6955 stats->pci_map_fail_cnt++;
6956 stats->mem_freed += (*skb)->truesize;
6957 dev_kfree_skb(*skb);
6958 return -ENOMEM;
6959 }
6960
6961 static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
6962 int size)
6963 {
6964 struct net_device *dev = sp->dev;
6965 if (sp->rxd_mode == RXD_MODE_1) {
6966 rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
6967 } else if (sp->rxd_mode == RXD_MODE_3B) {
6968 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
6969 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
6970 rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu + 4);
6971 }
6972 }
6973
6974 static int rxd_owner_bit_reset(struct s2io_nic *sp)
6975 {
6976 int i, j, k, blk_cnt = 0, size;
6977 struct config_param *config = &sp->config;
6978 struct mac_info *mac_control = &sp->mac_control;
6979 struct net_device *dev = sp->dev;
6980 struct RxD_t *rxdp = NULL;
6981 struct sk_buff *skb = NULL;
6982 struct buffAdd *ba = NULL;
6983 u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
6984
6985 /* Calculate the size based on ring mode */
6986 size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
6987 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
6988 if (sp->rxd_mode == RXD_MODE_1)
6989 size += NET_IP_ALIGN;
6990 else if (sp->rxd_mode == RXD_MODE_3B)
6991 size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
6992
6993 for (i = 0; i < config->rx_ring_num; i++) {
6994 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
6995 struct ring_info *ring = &mac_control->rings[i];
6996
6997 blk_cnt = rx_cfg->num_rxd / (rxd_count[sp->rxd_mode] + 1);
6998
6999 for (j = 0; j < blk_cnt; j++) {
7000 for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
7001 rxdp = ring->rx_blocks[j].rxds[k].virt_addr;
7002 if (sp->rxd_mode == RXD_MODE_3B)
7003 ba = &ring->ba[j][k];
7004 if (set_rxd_buffer_pointer(sp, rxdp, ba, &skb,
7005 (u64 *)&temp0_64,
7006 (u64 *)&temp1_64,
7007 (u64 *)&temp2_64,
7008 size) == -ENOMEM) {
7009 return 0;
7010 }
7011
7012 set_rxd_buffer_size(sp, rxdp, size);
7013 wmb();
7014 /* flip the Ownership bit to Hardware */
7015 rxdp->Control_1 |= RXD_OWN_XENA;
7016 }
7017 }
7018 }
7019 return 0;
7020
7021 }
7022
7023 static int s2io_add_isr(struct s2io_nic *sp)
7024 {
7025 int ret = 0;
7026 struct net_device *dev = sp->dev;
7027 int err = 0;
7028
7029 if (sp->config.intr_type == MSI_X)
7030 ret = s2io_enable_msi_x(sp);
7031 if (ret) {
7032 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
7033 sp->config.intr_type = INTA;
7034 }
7035
7036 /*
7037 * Store the values of the MSIX table in
7038 * the struct s2io_nic structure
7039 */
7040 store_xmsi_data(sp);
7041
7042 /* After proper initialization of H/W, register ISR */
7043 if (sp->config.intr_type == MSI_X) {
7044 int i, msix_rx_cnt = 0;
7045
7046 for (i = 0; i < sp->num_entries; i++) {
7047 if (sp->s2io_entries[i].in_use == MSIX_FLG) {
7048 if (sp->s2io_entries[i].type ==
7049 MSIX_RING_TYPE) {
7050 sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
7051 dev->name, i);
7052 err = request_irq(sp->entries[i].vector,
7053 s2io_msix_ring_handle,
7054 0,
7055 sp->desc[i],
7056 sp->s2io_entries[i].arg);
7057 } else if (sp->s2io_entries[i].type ==
7058 MSIX_ALARM_TYPE) {
7059 sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
7060 dev->name, i);
7061 err = request_irq(sp->entries[i].vector,
7062 s2io_msix_fifo_handle,
7063 0,
7064 sp->desc[i],
7065 sp->s2io_entries[i].arg);
7066
7067 }
7068 /* if either data or addr is zero print it. */
7069 if (!(sp->msix_info[i].addr &&
7070 sp->msix_info[i].data)) {
7071 DBG_PRINT(ERR_DBG,
7072 "%s @Addr:0x%llx Data:0x%llx\n",
7073 sp->desc[i],
7074 (unsigned long long)
7075 sp->msix_info[i].addr,
7076 (unsigned long long)
7077 ntohl(sp->msix_info[i].data));
7078 } else
7079 msix_rx_cnt++;
7080 if (err) {
7081 remove_msix_isr(sp);
7082
7083 DBG_PRINT(ERR_DBG,
7084 "%s:MSI-X-%d registration "
7085 "failed\n", dev->name, i);
7086
7087 DBG_PRINT(ERR_DBG,
7088 "%s: Defaulting to INTA\n",
7089 dev->name);
7090 sp->config.intr_type = INTA;
7091 break;
7092 }
7093 sp->s2io_entries[i].in_use =
7094 MSIX_REGISTERED_SUCCESS;
7095 }
7096 }
7097 if (!err) {
7098 pr_info("MSI-X-RX %d entries enabled\n", --msix_rx_cnt);
7099 DBG_PRINT(INFO_DBG,
7100 "MSI-X-TX entries enabled through alarm vector\n");
7101 }
7102 }
7103 if (sp->config.intr_type == INTA) {
7104 err = request_irq((int)sp->pdev->irq, s2io_isr, IRQF_SHARED,
7105 sp->name, dev);
7106 if (err) {
7107 DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
7108 dev->name);
7109 return -1;
7110 }
7111 }
7112 return 0;
7113 }
7114
7115 static void s2io_rem_isr(struct s2io_nic *sp)
7116 {
7117 if (sp->config.intr_type == MSI_X)
7118 remove_msix_isr(sp);
7119 else
7120 remove_inta_isr(sp);
7121 }
7122
7123 static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
7124 {
7125 int cnt = 0;
7126 struct XENA_dev_config __iomem *bar0 = sp->bar0;
7127 register u64 val64 = 0;
7128 struct config_param *config;
7129 config = &sp->config;
7130
7131 if (!is_s2io_card_up(sp))
7132 return;
7133
7134 del_timer_sync(&sp->alarm_timer);
7135 /* If s2io_set_link task is executing, wait till it completes. */
7136 while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state)))
7137 msleep(50);
7138 clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
7139
7140 /* Disable napi */
7141 if (sp->config.napi) {
7142 int off = 0;
7143 if (config->intr_type == MSI_X) {
7144 for (; off < sp->config.rx_ring_num; off++)
7145 napi_disable(&sp->mac_control.rings[off].napi);
7146 }
7147 else
7148 napi_disable(&sp->napi);
7149 }
7150
7151 /* disable Tx and Rx traffic on the NIC */
7152 if (do_io)
7153 stop_nic(sp);
7154
7155 s2io_rem_isr(sp);
7156
7157 /* stop the tx queue, indicate link down */
7158 s2io_link(sp, LINK_DOWN);
7159
7160 /* Check if the device is Quiescent and then Reset the NIC */
7161 while (do_io) {
7162 /* As per the HW requirement we need to replenish the
7163 * receive buffer to avoid the ring bump. Since there is
7164 * no intention of processing the Rx frame at this pointwe are
7165 * just settting the ownership bit of rxd in Each Rx
7166 * ring to HW and set the appropriate buffer size
7167 * based on the ring mode
7168 */
7169 rxd_owner_bit_reset(sp);
7170
7171 val64 = readq(&bar0->adapter_status);
7172 if (verify_xena_quiescence(sp)) {
7173 if (verify_pcc_quiescent(sp, sp->device_enabled_once))
7174 break;
7175 }
7176
7177 msleep(50);
7178 cnt++;
7179 if (cnt == 10) {
7180 DBG_PRINT(ERR_DBG, "Device not Quiescent - "
7181 "adapter status reads 0x%llx\n",
7182 (unsigned long long)val64);
7183 break;
7184 }
7185 }
7186 if (do_io)
7187 s2io_reset(sp);
7188
7189 /* Free all Tx buffers */
7190 free_tx_buffers(sp);
7191
7192 /* Free all Rx buffers */
7193 free_rx_buffers(sp);
7194
7195 clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
7196 }
7197
7198 static void s2io_card_down(struct s2io_nic *sp)
7199 {
7200 do_s2io_card_down(sp, 1);
7201 }
7202
7203 static int s2io_card_up(struct s2io_nic *sp)
7204 {
7205 int i, ret = 0;
7206 struct config_param *config;
7207 struct mac_info *mac_control;
7208 struct net_device *dev = (struct net_device *)sp->dev;
7209 u16 interruptible;
7210
7211 /* Initialize the H/W I/O registers */
7212 ret = init_nic(sp);
7213 if (ret != 0) {
7214 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
7215 dev->name);
7216 if (ret != -EIO)
7217 s2io_reset(sp);
7218 return ret;
7219 }
7220
7221 /*
7222 * Initializing the Rx buffers. For now we are considering only 1
7223 * Rx ring and initializing buffers into 30 Rx blocks
7224 */
7225 config = &sp->config;
7226 mac_control = &sp->mac_control;
7227
7228 for (i = 0; i < config->rx_ring_num; i++) {
7229 struct ring_info *ring = &mac_control->rings[i];
7230
7231 ring->mtu = dev->mtu;
7232 ret = fill_rx_buffers(sp, ring, 1);
7233 if (ret) {
7234 DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
7235 dev->name);
7236 s2io_reset(sp);
7237 free_rx_buffers(sp);
7238 return -ENOMEM;
7239 }
7240 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
7241 ring->rx_bufs_left);
7242 }
7243
7244 /* Initialise napi */
7245 if (config->napi) {
7246 if (config->intr_type == MSI_X) {
7247 for (i = 0; i < sp->config.rx_ring_num; i++)
7248 napi_enable(&sp->mac_control.rings[i].napi);
7249 } else {
7250 napi_enable(&sp->napi);
7251 }
7252 }
7253
7254 /* Maintain the state prior to the open */
7255 if (sp->promisc_flg)
7256 sp->promisc_flg = 0;
7257 if (sp->m_cast_flg) {
7258 sp->m_cast_flg = 0;
7259 sp->all_multi_pos = 0;
7260 }
7261
7262 /* Setting its receive mode */
7263 s2io_set_multicast(dev);
7264
7265 if (sp->lro) {
7266 /* Initialize max aggregatable pkts per session based on MTU */
7267 sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
7268 /* Check if we can use (if specified) user provided value */
7269 if (lro_max_pkts < sp->lro_max_aggr_per_sess)
7270 sp->lro_max_aggr_per_sess = lro_max_pkts;
7271 }
7272
7273 /* Enable Rx Traffic and interrupts on the NIC */
7274 if (start_nic(sp)) {
7275 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
7276 s2io_reset(sp);
7277 free_rx_buffers(sp);
7278 return -ENODEV;
7279 }
7280
7281 /* Add interrupt service routine */
7282 if (s2io_add_isr(sp) != 0) {
7283 if (sp->config.intr_type == MSI_X)
7284 s2io_rem_isr(sp);
7285 s2io_reset(sp);
7286 free_rx_buffers(sp);
7287 return -ENODEV;
7288 }
7289
7290 S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
7291
7292 set_bit(__S2IO_STATE_CARD_UP, &sp->state);
7293
7294 /* Enable select interrupts */
7295 en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
7296 if (sp->config.intr_type != INTA) {
7297 interruptible = TX_TRAFFIC_INTR | TX_PIC_INTR;
7298 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
7299 } else {
7300 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
7301 interruptible |= TX_PIC_INTR;
7302 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
7303 }
7304
7305 return 0;
7306 }
7307
7308 /**
7309 * s2io_restart_nic - Resets the NIC.
7310 * @data : long pointer to the device private structure
7311 * Description:
7312 * This function is scheduled to be run by the s2io_tx_watchdog
7313 * function after 0.5 secs to reset the NIC. The idea is to reduce
7314 * the run time of the watch dog routine which is run holding a
7315 * spin lock.
7316 */
7317
7318 static void s2io_restart_nic(struct work_struct *work)
7319 {
7320 struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task);
7321 struct net_device *dev = sp->dev;
7322
7323 rtnl_lock();
7324
7325 if (!netif_running(dev))
7326 goto out_unlock;
7327
7328 s2io_card_down(sp);
7329 if (s2io_card_up(sp)) {
7330 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);
7331 }
7332 s2io_wake_all_tx_queue(sp);
7333 DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);
7334 out_unlock:
7335 rtnl_unlock();
7336 }
7337
7338 /**
7339 * s2io_tx_watchdog - Watchdog for transmit side.
7340 * @dev : Pointer to net device structure
7341 * Description:
7342 * This function is triggered if the Tx Queue is stopped
7343 * for a pre-defined amount of time when the Interface is still up.
7344 * If the Interface is jammed in such a situation, the hardware is
7345 * reset (by s2io_close) and restarted again (by s2io_open) to
7346 * overcome any problem that might have been caused in the hardware.
7347 * Return value:
7348 * void
7349 */
7350
7351 static void s2io_tx_watchdog(struct net_device *dev)
7352 {
7353 struct s2io_nic *sp = netdev_priv(dev);
7354 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
7355
7356 if (netif_carrier_ok(dev)) {
7357 swstats->watchdog_timer_cnt++;
7358 schedule_work(&sp->rst_timer_task);
7359 swstats->soft_reset_cnt++;
7360 }
7361 }
7362
7363 /**
7364 * rx_osm_handler - To perform some OS related operations on SKB.
7365 * @sp: private member of the device structure,pointer to s2io_nic structure.
7366 * @skb : the socket buffer pointer.
7367 * @len : length of the packet
7368 * @cksum : FCS checksum of the frame.
7369 * @ring_no : the ring from which this RxD was extracted.
7370 * Description:
7371 * This function is called by the Rx interrupt serivce routine to perform
7372 * some OS related operations on the SKB before passing it to the upper
7373 * layers. It mainly checks if the checksum is OK, if so adds it to the
7374 * SKBs cksum variable, increments the Rx packet count and passes the SKB
7375 * to the upper layer. If the checksum is wrong, it increments the Rx
7376 * packet error count, frees the SKB and returns error.
7377 * Return value:
7378 * SUCCESS on success and -1 on failure.
7379 */
7380 static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
7381 {
7382 struct s2io_nic *sp = ring_data->nic;
7383 struct net_device *dev = (struct net_device *)ring_data->dev;
7384 struct sk_buff *skb = (struct sk_buff *)
7385 ((unsigned long)rxdp->Host_Control);
7386 int ring_no = ring_data->ring_no;
7387 u16 l3_csum, l4_csum;
7388 unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
7389 struct lro *uninitialized_var(lro);
7390 u8 err_mask;
7391 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
7392
7393 skb->dev = dev;
7394
7395 if (err) {
7396 /* Check for parity error */
7397 if (err & 0x1)
7398 swstats->parity_err_cnt++;
7399
7400 err_mask = err >> 48;
7401 switch (err_mask) {
7402 case 1:
7403 swstats->rx_parity_err_cnt++;
7404 break;
7405
7406 case 2:
7407 swstats->rx_abort_cnt++;
7408 break;
7409
7410 case 3:
7411 swstats->rx_parity_abort_cnt++;
7412 break;
7413
7414 case 4:
7415 swstats->rx_rda_fail_cnt++;
7416 break;
7417
7418 case 5:
7419 swstats->rx_unkn_prot_cnt++;
7420 break;
7421
7422 case 6:
7423 swstats->rx_fcs_err_cnt++;
7424 break;
7425
7426 case 7:
7427 swstats->rx_buf_size_err_cnt++;
7428 break;
7429
7430 case 8:
7431 swstats->rx_rxd_corrupt_cnt++;
7432 break;
7433
7434 case 15:
7435 swstats->rx_unkn_err_cnt++;
7436 break;
7437 }
7438 /*
7439 * Drop the packet if bad transfer code. Exception being
7440 * 0x5, which could be due to unsupported IPv6 extension header.
7441 * In this case, we let stack handle the packet.
7442 * Note that in this case, since checksum will be incorrect,
7443 * stack will validate the same.
7444 */
7445 if (err_mask != 0x5) {
7446 DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
7447 dev->name, err_mask);
7448 dev->stats.rx_crc_errors++;
7449 swstats->mem_freed
7450 += skb->truesize;
7451 dev_kfree_skb(skb);
7452 ring_data->rx_bufs_left -= 1;
7453 rxdp->Host_Control = 0;
7454 return 0;
7455 }
7456 }
7457
7458 /* Updating statistics */
7459 ring_data->rx_packets++;
7460 rxdp->Host_Control = 0;
7461 if (sp->rxd_mode == RXD_MODE_1) {
7462 int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
7463
7464 ring_data->rx_bytes += len;
7465 skb_put(skb, len);
7466
7467 } else if (sp->rxd_mode == RXD_MODE_3B) {
7468 int get_block = ring_data->rx_curr_get_info.block_index;
7469 int get_off = ring_data->rx_curr_get_info.offset;
7470 int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2);
7471 int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
7472 unsigned char *buff = skb_push(skb, buf0_len);
7473
7474 struct buffAdd *ba = &ring_data->ba[get_block][get_off];
7475 ring_data->rx_bytes += buf0_len + buf2_len;
7476 memcpy(buff, ba->ba_0, buf0_len);
7477 skb_put(skb, buf2_len);
7478 }
7479
7480 if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
7481 ((!ring_data->lro) ||
7482 (ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
7483 (sp->rx_csum)) {
7484 l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
7485 l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
7486 if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
7487 /*
7488 * NIC verifies if the Checksum of the received
7489 * frame is Ok or not and accordingly returns
7490 * a flag in the RxD.
7491 */
7492 skb->ip_summed = CHECKSUM_UNNECESSARY;
7493 if (ring_data->lro) {
7494 u32 tcp_len;
7495 u8 *tcp;
7496 int ret = 0;
7497
7498 ret = s2io_club_tcp_session(ring_data,
7499 skb->data, &tcp,
7500 &tcp_len, &lro,
7501 rxdp, sp);
7502 switch (ret) {
7503 case 3: /* Begin anew */
7504 lro->parent = skb;
7505 goto aggregate;
7506 case 1: /* Aggregate */
7507 lro_append_pkt(sp, lro, skb, tcp_len);
7508 goto aggregate;
7509 case 4: /* Flush session */
7510 lro_append_pkt(sp, lro, skb, tcp_len);
7511 queue_rx_frame(lro->parent,
7512 lro->vlan_tag);
7513 clear_lro_session(lro);
7514 swstats->flush_max_pkts++;
7515 goto aggregate;
7516 case 2: /* Flush both */
7517 lro->parent->data_len = lro->frags_len;
7518 swstats->sending_both++;
7519 queue_rx_frame(lro->parent,
7520 lro->vlan_tag);
7521 clear_lro_session(lro);
7522 goto send_up;
7523 case 0: /* sessions exceeded */
7524 case -1: /* non-TCP or not L2 aggregatable */
7525 case 5: /*
7526 * First pkt in session not
7527 * L3/L4 aggregatable
7528 */
7529 break;
7530 default:
7531 DBG_PRINT(ERR_DBG,
7532 "%s: Samadhana!!\n",
7533 __func__);
7534 BUG();
7535 }
7536 }
7537 } else {
7538 /*
7539 * Packet with erroneous checksum, let the
7540 * upper layers deal with it.
7541 */
7542 skb->ip_summed = CHECKSUM_NONE;
7543 }
7544 } else
7545 skb->ip_summed = CHECKSUM_NONE;
7546
7547 swstats->mem_freed += skb->truesize;
7548 send_up:
7549 skb_record_rx_queue(skb, ring_no);
7550 queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
7551 aggregate:
7552 sp->mac_control.rings[ring_no].rx_bufs_left -= 1;
7553 return SUCCESS;
7554 }
7555
7556 /**
7557 * s2io_link - stops/starts the Tx queue.
7558 * @sp : private member of the device structure, which is a pointer to the
7559 * s2io_nic structure.
7560 * @link : inidicates whether link is UP/DOWN.
7561 * Description:
7562 * This function stops/starts the Tx queue depending on whether the link
7563 * status of the NIC is is down or up. This is called by the Alarm
7564 * interrupt handler whenever a link change interrupt comes up.
7565 * Return value:
7566 * void.
7567 */
7568
7569 static void s2io_link(struct s2io_nic *sp, int link)
7570 {
7571 struct net_device *dev = (struct net_device *)sp->dev;
7572 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
7573
7574 if (link != sp->last_link_state) {
7575 init_tti(sp, link);
7576 if (link == LINK_DOWN) {
7577 DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
7578 s2io_stop_all_tx_queue(sp);
7579 netif_carrier_off(dev);
7580 if (swstats->link_up_cnt)
7581 swstats->link_up_time =
7582 jiffies - sp->start_time;
7583 swstats->link_down_cnt++;
7584 } else {
7585 DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
7586 if (swstats->link_down_cnt)
7587 swstats->link_down_time =
7588 jiffies - sp->start_time;
7589 swstats->link_up_cnt++;
7590 netif_carrier_on(dev);
7591 s2io_wake_all_tx_queue(sp);
7592 }
7593 }
7594 sp->last_link_state = link;
7595 sp->start_time = jiffies;
7596 }
7597
7598 /**
7599 * s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
7600 * @sp : private member of the device structure, which is a pointer to the
7601 * s2io_nic structure.
7602 * Description:
7603 * This function initializes a few of the PCI and PCI-X configuration registers
7604 * with recommended values.
7605 * Return value:
7606 * void
7607 */
7608
7609 static void s2io_init_pci(struct s2io_nic *sp)
7610 {
7611 u16 pci_cmd = 0, pcix_cmd = 0;
7612
7613 /* Enable Data Parity Error Recovery in PCI-X command register. */
7614 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7615 &(pcix_cmd));
7616 pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7617 (pcix_cmd | 1));
7618 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7619 &(pcix_cmd));
7620
7621 /* Set the PErr Response bit in PCI command register. */
7622 pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7623 pci_write_config_word(sp->pdev, PCI_COMMAND,
7624 (pci_cmd | PCI_COMMAND_PARITY));
7625 pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7626 }
7627
7628 static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
7629 u8 *dev_multiq)
7630 {
7631 if ((tx_fifo_num > MAX_TX_FIFOS) || (tx_fifo_num < 1)) {
7632 DBG_PRINT(ERR_DBG, "Requested number of tx fifos "
7633 "(%d) not supported\n", tx_fifo_num);
7634
7635 if (tx_fifo_num < 1)
7636 tx_fifo_num = 1;
7637 else
7638 tx_fifo_num = MAX_TX_FIFOS;
7639
7640 DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);
7641 }
7642
7643 if (multiq)
7644 *dev_multiq = multiq;
7645
7646 if (tx_steering_type && (1 == tx_fifo_num)) {
7647 if (tx_steering_type != TX_DEFAULT_STEERING)
7648 DBG_PRINT(ERR_DBG,
7649 "Tx steering is not supported with "
7650 "one fifo. Disabling Tx steering.\n");
7651 tx_steering_type = NO_STEERING;
7652 }
7653
7654 if ((tx_steering_type < NO_STEERING) ||
7655 (tx_steering_type > TX_DEFAULT_STEERING)) {
7656 DBG_PRINT(ERR_DBG,
7657 "Requested transmit steering not supported\n");
7658 DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");
7659 tx_steering_type = NO_STEERING;
7660 }
7661
7662 if (rx_ring_num > MAX_RX_RINGS) {
7663 DBG_PRINT(ERR_DBG,
7664 "Requested number of rx rings not supported\n");
7665 DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",
7666 MAX_RX_RINGS);
7667 rx_ring_num = MAX_RX_RINGS;
7668 }
7669
7670 if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
7671 DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "
7672 "Defaulting to INTA\n");
7673 *dev_intr_type = INTA;
7674 }
7675
7676 if ((*dev_intr_type == MSI_X) &&
7677 ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
7678 (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
7679 DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "
7680 "Defaulting to INTA\n");
7681 *dev_intr_type = INTA;
7682 }
7683
7684 if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) {
7685 DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");
7686 DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");
7687 rx_ring_mode = 1;
7688 }
7689 return SUCCESS;
7690 }
7691
7692 /**
7693 * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
7694 * or Traffic class respectively.
7695 * @nic: device private variable
7696 * Description: The function configures the receive steering to
7697 * desired receive ring.
7698 * Return Value: SUCCESS on success and
7699 * '-1' on failure (endian settings incorrect).
7700 */
7701 static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring)
7702 {
7703 struct XENA_dev_config __iomem *bar0 = nic->bar0;
7704 register u64 val64 = 0;
7705
7706 if (ds_codepoint > 63)
7707 return FAILURE;
7708
7709 val64 = RTS_DS_MEM_DATA(ring);
7710 writeq(val64, &bar0->rts_ds_mem_data);
7711
7712 val64 = RTS_DS_MEM_CTRL_WE |
7713 RTS_DS_MEM_CTRL_STROBE_NEW_CMD |
7714 RTS_DS_MEM_CTRL_OFFSET(ds_codepoint);
7715
7716 writeq(val64, &bar0->rts_ds_mem_ctrl);
7717
7718 return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl,
7719 RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
7720 S2IO_BIT_RESET);
7721 }
7722
7723 static const struct net_device_ops s2io_netdev_ops = {
7724 .ndo_open = s2io_open,
7725 .ndo_stop = s2io_close,
7726 .ndo_get_stats = s2io_get_stats,
7727 .ndo_start_xmit = s2io_xmit,
7728 .ndo_validate_addr = eth_validate_addr,
7729 .ndo_set_multicast_list = s2io_set_multicast,
7730 .ndo_do_ioctl = s2io_ioctl,
7731 .ndo_set_mac_address = s2io_set_mac_addr,
7732 .ndo_change_mtu = s2io_change_mtu,
7733 .ndo_vlan_rx_register = s2io_vlan_rx_register,
7734 .ndo_vlan_rx_kill_vid = s2io_vlan_rx_kill_vid,
7735 .ndo_tx_timeout = s2io_tx_watchdog,
7736 #ifdef CONFIG_NET_POLL_CONTROLLER
7737 .ndo_poll_controller = s2io_netpoll,
7738 #endif
7739 };
7740
7741 /**
7742 * s2io_init_nic - Initialization of the adapter .
7743 * @pdev : structure containing the PCI related information of the device.
7744 * @pre: List of PCI devices supported by the driver listed in s2io_tbl.
7745 * Description:
7746 * The function initializes an adapter identified by the pci_dec structure.
7747 * All OS related initialization including memory and device structure and
7748 * initlaization of the device private variable is done. Also the swapper
7749 * control register is initialized to enable read and write into the I/O
7750 * registers of the device.
7751 * Return value:
7752 * returns 0 on success and negative on failure.
7753 */
7754
7755 static int __devinit
7756 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
7757 {
7758 struct s2io_nic *sp;
7759 struct net_device *dev;
7760 int i, j, ret;
7761 int dma_flag = false;
7762 u32 mac_up, mac_down;
7763 u64 val64 = 0, tmp64 = 0;
7764 struct XENA_dev_config __iomem *bar0 = NULL;
7765 u16 subid;
7766 struct config_param *config;
7767 struct mac_info *mac_control;
7768 int mode;
7769 u8 dev_intr_type = intr_type;
7770 u8 dev_multiq = 0;
7771
7772 ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq);
7773 if (ret)
7774 return ret;
7775
7776 ret = pci_enable_device(pdev);
7777 if (ret) {
7778 DBG_PRINT(ERR_DBG,
7779 "%s: pci_enable_device failed\n", __func__);
7780 return ret;
7781 }
7782
7783 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
7784 DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__);
7785 dma_flag = true;
7786 if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
7787 DBG_PRINT(ERR_DBG,
7788 "Unable to obtain 64bit DMA "
7789 "for consistent allocations\n");
7790 pci_disable_device(pdev);
7791 return -ENOMEM;
7792 }
7793 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
7794 DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__);
7795 } else {
7796 pci_disable_device(pdev);
7797 return -ENOMEM;
7798 }
7799 ret = pci_request_regions(pdev, s2io_driver_name);
7800 if (ret) {
7801 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",
7802 __func__, ret);
7803 pci_disable_device(pdev);
7804 return -ENODEV;
7805 }
7806 if (dev_multiq)
7807 dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
7808 else
7809 dev = alloc_etherdev(sizeof(struct s2io_nic));
7810 if (dev == NULL) {
7811 DBG_PRINT(ERR_DBG, "Device allocation failed\n");
7812 pci_disable_device(pdev);
7813 pci_release_regions(pdev);
7814 return -ENODEV;
7815 }
7816
7817 pci_set_master(pdev);
7818 pci_set_drvdata(pdev, dev);
7819 SET_NETDEV_DEV(dev, &pdev->dev);
7820
7821 /* Private member variable initialized to s2io NIC structure */
7822 sp = netdev_priv(dev);
7823 memset(sp, 0, sizeof(struct s2io_nic));
7824 sp->dev = dev;
7825 sp->pdev = pdev;
7826 sp->high_dma_flag = dma_flag;
7827 sp->device_enabled_once = false;
7828 if (rx_ring_mode == 1)
7829 sp->rxd_mode = RXD_MODE_1;
7830 if (rx_ring_mode == 2)
7831 sp->rxd_mode = RXD_MODE_3B;
7832
7833 sp->config.intr_type = dev_intr_type;
7834
7835 if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
7836 (pdev->device == PCI_DEVICE_ID_HERC_UNI))
7837 sp->device_type = XFRAME_II_DEVICE;
7838 else
7839 sp->device_type = XFRAME_I_DEVICE;
7840
7841 sp->lro = lro_enable;
7842
7843 /* Initialize some PCI/PCI-X fields of the NIC. */
7844 s2io_init_pci(sp);
7845
7846 /*
7847 * Setting the device configuration parameters.
7848 * Most of these parameters can be specified by the user during
7849 * module insertion as they are module loadable parameters. If
7850 * these parameters are not not specified during load time, they
7851 * are initialized with default values.
7852 */
7853 config = &sp->config;
7854 mac_control = &sp->mac_control;
7855
7856 config->napi = napi;
7857 config->tx_steering_type = tx_steering_type;
7858
7859 /* Tx side parameters. */
7860 if (config->tx_steering_type == TX_PRIORITY_STEERING)
7861 config->tx_fifo_num = MAX_TX_FIFOS;
7862 else
7863 config->tx_fifo_num = tx_fifo_num;
7864
7865 /* Initialize the fifos used for tx steering */
7866 if (config->tx_fifo_num < 5) {
7867 if (config->tx_fifo_num == 1)
7868 sp->total_tcp_fifos = 1;
7869 else
7870 sp->total_tcp_fifos = config->tx_fifo_num - 1;
7871 sp->udp_fifo_idx = config->tx_fifo_num - 1;
7872 sp->total_udp_fifos = 1;
7873 sp->other_fifo_idx = sp->total_tcp_fifos - 1;
7874 } else {
7875 sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
7876 FIFO_OTHER_MAX_NUM);
7877 sp->udp_fifo_idx = sp->total_tcp_fifos;
7878 sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
7879 sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
7880 }
7881
7882 config->multiq = dev_multiq;
7883 for (i = 0; i < config->tx_fifo_num; i++) {
7884 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
7885
7886 tx_cfg->fifo_len = tx_fifo_len[i];
7887 tx_cfg->fifo_priority = i;
7888 }
7889
7890 /* mapping the QoS priority to the configured fifos */
7891 for (i = 0; i < MAX_TX_FIFOS; i++)
7892 config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i];
7893
7894 /* map the hashing selector table to the configured fifos */
7895 for (i = 0; i < config->tx_fifo_num; i++)
7896 sp->fifo_selector[i] = fifo_selector[i];
7897
7898
7899 config->tx_intr_type = TXD_INT_TYPE_UTILZ;
7900 for (i = 0; i < config->tx_fifo_num; i++) {
7901 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
7902
7903 tx_cfg->f_no_snoop = (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
7904 if (tx_cfg->fifo_len < 65) {
7905 config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
7906 break;
7907 }
7908 }
7909 /* + 2 because one Txd for skb->data and one Txd for UFO */
7910 config->max_txds = MAX_SKB_FRAGS + 2;
7911
7912 /* Rx side parameters. */
7913 config->rx_ring_num = rx_ring_num;
7914 for (i = 0; i < config->rx_ring_num; i++) {
7915 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
7916 struct ring_info *ring = &mac_control->rings[i];
7917
7918 rx_cfg->num_rxd = rx_ring_sz[i] * (rxd_count[sp->rxd_mode] + 1);
7919 rx_cfg->ring_priority = i;
7920 ring->rx_bufs_left = 0;
7921 ring->rxd_mode = sp->rxd_mode;
7922 ring->rxd_count = rxd_count[sp->rxd_mode];
7923 ring->pdev = sp->pdev;
7924 ring->dev = sp->dev;
7925 }
7926
7927 for (i = 0; i < rx_ring_num; i++) {
7928 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
7929
7930 rx_cfg->ring_org = RING_ORG_BUFF1;
7931 rx_cfg->f_no_snoop = (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
7932 }
7933
7934 /* Setting Mac Control parameters */
7935 mac_control->rmac_pause_time = rmac_pause_time;
7936 mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
7937 mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
7938
7939
7940 /* initialize the shared memory used by the NIC and the host */
7941 if (init_shared_mem(sp)) {
7942 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);
7943 ret = -ENOMEM;
7944 goto mem_alloc_failed;
7945 }
7946
7947 sp->bar0 = pci_ioremap_bar(pdev, 0);
7948 if (!sp->bar0) {
7949 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
7950 dev->name);
7951 ret = -ENOMEM;
7952 goto bar0_remap_failed;
7953 }
7954
7955 sp->bar1 = pci_ioremap_bar(pdev, 2);
7956 if (!sp->bar1) {
7957 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
7958 dev->name);
7959 ret = -ENOMEM;
7960 goto bar1_remap_failed;
7961 }
7962
7963 dev->irq = pdev->irq;
7964 dev->base_addr = (unsigned long)sp->bar0;
7965
7966 /* Initializing the BAR1 address as the start of the FIFO pointer. */
7967 for (j = 0; j < MAX_TX_FIFOS; j++) {
7968 mac_control->tx_FIFO_start[j] =
7969 (struct TxFIFO_element __iomem *)
7970 (sp->bar1 + (j * 0x00020000));
7971 }
7972
7973 /* Driver entry points */
7974 dev->netdev_ops = &s2io_netdev_ops;
7975 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
7976 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
7977
7978 dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
7979 if (sp->high_dma_flag == true)
7980 dev->features |= NETIF_F_HIGHDMA;
7981 dev->features |= NETIF_F_TSO;
7982 dev->features |= NETIF_F_TSO6;
7983 if ((sp->device_type & XFRAME_II_DEVICE) && (ufo)) {
7984 dev->features |= NETIF_F_UFO;
7985 dev->features |= NETIF_F_HW_CSUM;
7986 }
7987 dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
7988 INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
7989 INIT_WORK(&sp->set_link_task, s2io_set_link);
7990
7991 pci_save_state(sp->pdev);
7992
7993 /* Setting swapper control on the NIC, for proper reset operation */
7994 if (s2io_set_swapper(sp)) {
7995 DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",
7996 dev->name);
7997 ret = -EAGAIN;
7998 goto set_swap_failed;
7999 }
8000
8001 /* Verify if the Herc works on the slot its placed into */
8002 if (sp->device_type & XFRAME_II_DEVICE) {
8003 mode = s2io_verify_pci_mode(sp);
8004 if (mode < 0) {
8005 DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",
8006 __func__);
8007 ret = -EBADSLT;
8008 goto set_swap_failed;
8009 }
8010 }
8011
8012 if (sp->config.intr_type == MSI_X) {
8013 sp->num_entries = config->rx_ring_num + 1;
8014 ret = s2io_enable_msi_x(sp);
8015
8016 if (!ret) {
8017 ret = s2io_test_msi(sp);
8018 /* rollback MSI-X, will re-enable during add_isr() */
8019 remove_msix_isr(sp);
8020 }
8021 if (ret) {
8022
8023 DBG_PRINT(ERR_DBG,
8024 "MSI-X requested but failed to enable\n");
8025 sp->config.intr_type = INTA;
8026 }
8027 }
8028
8029 if (config->intr_type == MSI_X) {
8030 for (i = 0; i < config->rx_ring_num ; i++) {
8031 struct ring_info *ring = &mac_control->rings[i];
8032
8033 netif_napi_add(dev, &ring->napi, s2io_poll_msix, 64);
8034 }
8035 } else {
8036 netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
8037 }
8038
8039 /* Not needed for Herc */
8040 if (sp->device_type & XFRAME_I_DEVICE) {
8041 /*
8042 * Fix for all "FFs" MAC address problems observed on
8043 * Alpha platforms
8044 */
8045 fix_mac_address(sp);
8046 s2io_reset(sp);
8047 }
8048
8049 /*
8050 * MAC address initialization.
8051 * For now only one mac address will be read and used.
8052 */
8053 bar0 = sp->bar0;
8054 val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
8055 RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
8056 writeq(val64, &bar0->rmac_addr_cmd_mem);
8057 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
8058 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
8059 S2IO_BIT_RESET);
8060 tmp64 = readq(&bar0->rmac_addr_data0_mem);
8061 mac_down = (u32)tmp64;
8062 mac_up = (u32) (tmp64 >> 32);
8063
8064 sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
8065 sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
8066 sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
8067 sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
8068 sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
8069 sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
8070
8071 /* Set the factory defined MAC address initially */
8072 dev->addr_len = ETH_ALEN;
8073 memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
8074 memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
8075
8076 /* initialize number of multicast & unicast MAC entries variables */
8077 if (sp->device_type == XFRAME_I_DEVICE) {
8078 config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
8079 config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
8080 config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
8081 } else if (sp->device_type == XFRAME_II_DEVICE) {
8082 config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
8083 config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
8084 config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
8085 }
8086
8087 /* store mac addresses from CAM to s2io_nic structure */
8088 do_s2io_store_unicast_mc(sp);
8089
8090 /* Configure MSIX vector for number of rings configured plus one */
8091 if ((sp->device_type == XFRAME_II_DEVICE) &&
8092 (config->intr_type == MSI_X))
8093 sp->num_entries = config->rx_ring_num + 1;
8094
8095 /* Store the values of the MSIX table in the s2io_nic structure */
8096 store_xmsi_data(sp);
8097 /* reset Nic and bring it to known state */
8098 s2io_reset(sp);
8099
8100 /*
8101 * Initialize link state flags
8102 * and the card state parameter
8103 */
8104 sp->state = 0;
8105
8106 /* Initialize spinlocks */
8107 for (i = 0; i < sp->config.tx_fifo_num; i++) {
8108 struct fifo_info *fifo = &mac_control->fifos[i];
8109
8110 spin_lock_init(&fifo->tx_lock);
8111 }
8112
8113 /*
8114 * SXE-002: Configure link and activity LED to init state
8115 * on driver load.
8116 */
8117 subid = sp->pdev->subsystem_device;
8118 if ((subid & 0xFF) >= 0x07) {
8119 val64 = readq(&bar0->gpio_control);
8120 val64 |= 0x0000800000000000ULL;
8121 writeq(val64, &bar0->gpio_control);
8122 val64 = 0x0411040400000000ULL;
8123 writeq(val64, (void __iomem *)bar0 + 0x2700);
8124 val64 = readq(&bar0->gpio_control);
8125 }
8126
8127 sp->rx_csum = 1; /* Rx chksum verify enabled by default */
8128
8129 if (register_netdev(dev)) {
8130 DBG_PRINT(ERR_DBG, "Device registration failed\n");
8131 ret = -ENODEV;
8132 goto register_failed;
8133 }
8134 s2io_vpd_read(sp);
8135 DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
8136 DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,
8137 sp->product_name, pdev->revision);
8138 DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
8139 s2io_driver_version);
8140 DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);
8141 DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);
8142 if (sp->device_type & XFRAME_II_DEVICE) {
8143 mode = s2io_print_pci_mode(sp);
8144 if (mode < 0) {
8145 ret = -EBADSLT;
8146 unregister_netdev(dev);
8147 goto set_swap_failed;
8148 }
8149 }
8150 switch (sp->rxd_mode) {
8151 case RXD_MODE_1:
8152 DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
8153 dev->name);
8154 break;
8155 case RXD_MODE_3B:
8156 DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
8157 dev->name);
8158 break;
8159 }
8160
8161 switch (sp->config.napi) {
8162 case 0:
8163 DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
8164 break;
8165 case 1:
8166 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
8167 break;
8168 }
8169
8170 DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
8171 sp->config.tx_fifo_num);
8172
8173 DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,
8174 sp->config.rx_ring_num);
8175
8176 switch (sp->config.intr_type) {
8177 case INTA:
8178 DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
8179 break;
8180 case MSI_X:
8181 DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
8182 break;
8183 }
8184 if (sp->config.multiq) {
8185 for (i = 0; i < sp->config.tx_fifo_num; i++) {
8186 struct fifo_info *fifo = &mac_control->fifos[i];
8187
8188 fifo->multiq = config->multiq;
8189 }
8190 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
8191 dev->name);
8192 } else
8193 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
8194 dev->name);
8195
8196 switch (sp->config.tx_steering_type) {
8197 case NO_STEERING:
8198 DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",
8199 dev->name);
8200 break;
8201 case TX_PRIORITY_STEERING:
8202 DBG_PRINT(ERR_DBG,
8203 "%s: Priority steering enabled for transmit\n",
8204 dev->name);
8205 break;
8206 case TX_DEFAULT_STEERING:
8207 DBG_PRINT(ERR_DBG,
8208 "%s: Default steering enabled for transmit\n",
8209 dev->name);
8210 }
8211
8212 if (sp->lro)
8213 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
8214 dev->name);
8215 if (ufo)
8216 DBG_PRINT(ERR_DBG,
8217 "%s: UDP Fragmentation Offload(UFO) enabled\n",
8218 dev->name);
8219 /* Initialize device name */
8220 sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
8221
8222 if (vlan_tag_strip)
8223 sp->vlan_strip_flag = 1;
8224 else
8225 sp->vlan_strip_flag = 0;
8226
8227 /*
8228 * Make Link state as off at this point, when the Link change
8229 * interrupt comes the state will be automatically changed to
8230 * the right state.
8231 */
8232 netif_carrier_off(dev);
8233
8234 return 0;
8235
8236 register_failed:
8237 set_swap_failed:
8238 iounmap(sp->bar1);
8239 bar1_remap_failed:
8240 iounmap(sp->bar0);
8241 bar0_remap_failed:
8242 mem_alloc_failed:
8243 free_shared_mem(sp);
8244 pci_disable_device(pdev);
8245 pci_release_regions(pdev);
8246 pci_set_drvdata(pdev, NULL);
8247 free_netdev(dev);
8248
8249 return ret;
8250 }
8251
8252 /**
8253 * s2io_rem_nic - Free the PCI device
8254 * @pdev: structure containing the PCI related information of the device.
8255 * Description: This function is called by the Pci subsystem to release a
8256 * PCI device and free up all resource held up by the device. This could
8257 * be in response to a Hot plug event or when the driver is to be removed
8258 * from memory.
8259 */
8260
8261 static void __devexit s2io_rem_nic(struct pci_dev *pdev)
8262 {
8263 struct net_device *dev =
8264 (struct net_device *)pci_get_drvdata(pdev);
8265 struct s2io_nic *sp;
8266
8267 if (dev == NULL) {
8268 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
8269 return;
8270 }
8271
8272 flush_scheduled_work();
8273
8274 sp = netdev_priv(dev);
8275 unregister_netdev(dev);
8276
8277 free_shared_mem(sp);
8278 iounmap(sp->bar0);
8279 iounmap(sp->bar1);
8280 pci_release_regions(pdev);
8281 pci_set_drvdata(pdev, NULL);
8282 free_netdev(dev);
8283 pci_disable_device(pdev);
8284 }
8285
8286 /**
8287 * s2io_starter - Entry point for the driver
8288 * Description: This function is the entry point for the driver. It verifies
8289 * the module loadable parameters and initializes PCI configuration space.
8290 */
8291
8292 static int __init s2io_starter(void)
8293 {
8294 return pci_register_driver(&s2io_driver);
8295 }
8296
8297 /**
8298 * s2io_closer - Cleanup routine for the driver
8299 * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
8300 */
8301
8302 static __exit void s2io_closer(void)
8303 {
8304 pci_unregister_driver(&s2io_driver);
8305 DBG_PRINT(INIT_DBG, "cleanup done\n");
8306 }
8307
8308 module_init(s2io_starter);
8309 module_exit(s2io_closer);
8310
8311 static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
8312 struct tcphdr **tcp, struct RxD_t *rxdp,
8313 struct s2io_nic *sp)
8314 {
8315 int ip_off;
8316 u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
8317
8318 if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
8319 DBG_PRINT(INIT_DBG,
8320 "%s: Non-TCP frames not supported for LRO\n",
8321 __func__);
8322 return -1;
8323 }
8324
8325 /* Checking for DIX type or DIX type with VLAN */
8326 if ((l2_type == 0) || (l2_type == 4)) {
8327 ip_off = HEADER_ETHERNET_II_802_3_SIZE;
8328 /*
8329 * If vlan stripping is disabled and the frame is VLAN tagged,
8330 * shift the offset by the VLAN header size bytes.
8331 */
8332 if ((!sp->vlan_strip_flag) &&
8333 (rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
8334 ip_off += HEADER_VLAN_SIZE;
8335 } else {
8336 /* LLC, SNAP etc are considered non-mergeable */
8337 return -1;
8338 }
8339
8340 *ip = (struct iphdr *)((u8 *)buffer + ip_off);
8341 ip_len = (u8)((*ip)->ihl);
8342 ip_len <<= 2;
8343 *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len);
8344
8345 return 0;
8346 }
8347
8348 static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
8349 struct tcphdr *tcp)
8350 {
8351 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8352 if ((lro->iph->saddr != ip->saddr) ||
8353 (lro->iph->daddr != ip->daddr) ||
8354 (lro->tcph->source != tcp->source) ||
8355 (lro->tcph->dest != tcp->dest))
8356 return -1;
8357 return 0;
8358 }
8359
8360 static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
8361 {
8362 return ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2);
8363 }
8364
8365 static void initiate_new_session(struct lro *lro, u8 *l2h,
8366 struct iphdr *ip, struct tcphdr *tcp,
8367 u32 tcp_pyld_len, u16 vlan_tag)
8368 {
8369 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8370 lro->l2h = l2h;
8371 lro->iph = ip;
8372 lro->tcph = tcp;
8373 lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
8374 lro->tcp_ack = tcp->ack_seq;
8375 lro->sg_num = 1;
8376 lro->total_len = ntohs(ip->tot_len);
8377 lro->frags_len = 0;
8378 lro->vlan_tag = vlan_tag;
8379 /*
8380 * Check if we saw TCP timestamp.
8381 * Other consistency checks have already been done.
8382 */
8383 if (tcp->doff == 8) {
8384 __be32 *ptr;
8385 ptr = (__be32 *)(tcp+1);
8386 lro->saw_ts = 1;
8387 lro->cur_tsval = ntohl(*(ptr+1));
8388 lro->cur_tsecr = *(ptr+2);
8389 }
8390 lro->in_use = 1;
8391 }
8392
8393 static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro)
8394 {
8395 struct iphdr *ip = lro->iph;
8396 struct tcphdr *tcp = lro->tcph;
8397 __sum16 nchk;
8398 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
8399
8400 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8401
8402 /* Update L3 header */
8403 ip->tot_len = htons(lro->total_len);
8404 ip->check = 0;
8405 nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl);
8406 ip->check = nchk;
8407
8408 /* Update L4 header */
8409 tcp->ack_seq = lro->tcp_ack;
8410 tcp->window = lro->window;
8411
8412 /* Update tsecr field if this session has timestamps enabled */
8413 if (lro->saw_ts) {
8414 __be32 *ptr = (__be32 *)(tcp + 1);
8415 *(ptr+2) = lro->cur_tsecr;
8416 }
8417
8418 /* Update counters required for calculation of
8419 * average no. of packets aggregated.
8420 */
8421 swstats->sum_avg_pkts_aggregated += lro->sg_num;
8422 swstats->num_aggregations++;
8423 }
8424
8425 static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
8426 struct tcphdr *tcp, u32 l4_pyld)
8427 {
8428 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8429 lro->total_len += l4_pyld;
8430 lro->frags_len += l4_pyld;
8431 lro->tcp_next_seq += l4_pyld;
8432 lro->sg_num++;
8433
8434 /* Update ack seq no. and window ad(from this pkt) in LRO object */
8435 lro->tcp_ack = tcp->ack_seq;
8436 lro->window = tcp->window;
8437
8438 if (lro->saw_ts) {
8439 __be32 *ptr;
8440 /* Update tsecr and tsval from this packet */
8441 ptr = (__be32 *)(tcp+1);
8442 lro->cur_tsval = ntohl(*(ptr+1));
8443 lro->cur_tsecr = *(ptr + 2);
8444 }
8445 }
8446
8447 static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip,
8448 struct tcphdr *tcp, u32 tcp_pyld_len)
8449 {
8450 u8 *ptr;
8451
8452 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8453
8454 if (!tcp_pyld_len) {
8455 /* Runt frame or a pure ack */
8456 return -1;
8457 }
8458
8459 if (ip->ihl != 5) /* IP has options */
8460 return -1;
8461
8462 /* If we see CE codepoint in IP header, packet is not mergeable */
8463 if (INET_ECN_is_ce(ipv4_get_dsfield(ip)))
8464 return -1;
8465
8466 /* If we see ECE or CWR flags in TCP header, packet is not mergeable */
8467 if (tcp->urg || tcp->psh || tcp->rst ||
8468 tcp->syn || tcp->fin ||
8469 tcp->ece || tcp->cwr || !tcp->ack) {
8470 /*
8471 * Currently recognize only the ack control word and
8472 * any other control field being set would result in
8473 * flushing the LRO session
8474 */
8475 return -1;
8476 }
8477
8478 /*
8479 * Allow only one TCP timestamp option. Don't aggregate if
8480 * any other options are detected.
8481 */
8482 if (tcp->doff != 5 && tcp->doff != 8)
8483 return -1;
8484
8485 if (tcp->doff == 8) {
8486 ptr = (u8 *)(tcp + 1);
8487 while (*ptr == TCPOPT_NOP)
8488 ptr++;
8489 if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP)
8490 return -1;
8491
8492 /* Ensure timestamp value increases monotonically */
8493 if (l_lro)
8494 if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2))))
8495 return -1;
8496
8497 /* timestamp echo reply should be non-zero */
8498 if (*((__be32 *)(ptr+6)) == 0)
8499 return -1;
8500 }
8501
8502 return 0;
8503 }
8504
8505 static int s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer,
8506 u8 **tcp, u32 *tcp_len, struct lro **lro,
8507 struct RxD_t *rxdp, struct s2io_nic *sp)
8508 {
8509 struct iphdr *ip;
8510 struct tcphdr *tcph;
8511 int ret = 0, i;
8512 u16 vlan_tag = 0;
8513 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
8514
8515 ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
8516 rxdp, sp);
8517 if (ret)
8518 return ret;
8519
8520 DBG_PRINT(INFO_DBG, "IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr);
8521
8522 vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2);
8523 tcph = (struct tcphdr *)*tcp;
8524 *tcp_len = get_l4_pyld_length(ip, tcph);
8525 for (i = 0; i < MAX_LRO_SESSIONS; i++) {
8526 struct lro *l_lro = &ring_data->lro0_n[i];
8527 if (l_lro->in_use) {
8528 if (check_for_socket_match(l_lro, ip, tcph))
8529 continue;
8530 /* Sock pair matched */
8531 *lro = l_lro;
8532
8533 if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
8534 DBG_PRINT(INFO_DBG, "%s: Out of sequence. "
8535 "expected 0x%x, actual 0x%x\n",
8536 __func__,
8537 (*lro)->tcp_next_seq,
8538 ntohl(tcph->seq));
8539
8540 swstats->outof_sequence_pkts++;
8541 ret = 2;
8542 break;
8543 }
8544
8545 if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,
8546 *tcp_len))
8547 ret = 1; /* Aggregate */
8548 else
8549 ret = 2; /* Flush both */
8550 break;
8551 }
8552 }
8553
8554 if (ret == 0) {
8555 /* Before searching for available LRO objects,
8556 * check if the pkt is L3/L4 aggregatable. If not
8557 * don't create new LRO session. Just send this
8558 * packet up.
8559 */
8560 if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len))
8561 return 5;
8562
8563 for (i = 0; i < MAX_LRO_SESSIONS; i++) {
8564 struct lro *l_lro = &ring_data->lro0_n[i];
8565 if (!(l_lro->in_use)) {
8566 *lro = l_lro;
8567 ret = 3; /* Begin anew */
8568 break;
8569 }
8570 }
8571 }
8572
8573 if (ret == 0) { /* sessions exceeded */
8574 DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n",
8575 __func__);
8576 *lro = NULL;
8577 return ret;
8578 }
8579
8580 switch (ret) {
8581 case 3:
8582 initiate_new_session(*lro, buffer, ip, tcph, *tcp_len,
8583 vlan_tag);
8584 break;
8585 case 2:
8586 update_L3L4_header(sp, *lro);
8587 break;
8588 case 1:
8589 aggregate_new_rx(*lro, ip, tcph, *tcp_len);
8590 if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
8591 update_L3L4_header(sp, *lro);
8592 ret = 4; /* Flush the LRO */
8593 }
8594 break;
8595 default:
8596 DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);
8597 break;
8598 }
8599
8600 return ret;
8601 }
8602
8603 static void clear_lro_session(struct lro *lro)
8604 {
8605 static u16 lro_struct_size = sizeof(struct lro);
8606
8607 memset(lro, 0, lro_struct_size);
8608 }
8609
8610 static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag)
8611 {
8612 struct net_device *dev = skb->dev;
8613 struct s2io_nic *sp = netdev_priv(dev);
8614
8615 skb->protocol = eth_type_trans(skb, dev);
8616 if (sp->vlgrp && vlan_tag && (sp->vlan_strip_flag)) {
8617 /* Queueing the vlan frame to the upper layer */
8618 if (sp->config.napi)
8619 vlan_hwaccel_receive_skb(skb, sp->vlgrp, vlan_tag);
8620 else
8621 vlan_hwaccel_rx(skb, sp->vlgrp, vlan_tag);
8622 } else {
8623 if (sp->config.napi)
8624 netif_receive_skb(skb);
8625 else
8626 netif_rx(skb);
8627 }
8628 }
8629
8630 static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
8631 struct sk_buff *skb, u32 tcp_len)
8632 {
8633 struct sk_buff *first = lro->parent;
8634 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
8635
8636 first->len += tcp_len;
8637 first->data_len = lro->frags_len;
8638 skb_pull(skb, (skb->len - tcp_len));
8639 if (skb_shinfo(first)->frag_list)
8640 lro->last_frag->next = skb;
8641 else
8642 skb_shinfo(first)->frag_list = skb;
8643 first->truesize += skb->truesize;
8644 lro->last_frag = skb;
8645 swstats->clubbed_frms_cnt++;
8646 }
8647
8648 /**
8649 * s2io_io_error_detected - called when PCI error is detected
8650 * @pdev: Pointer to PCI device
8651 * @state: The current pci connection state
8652 *
8653 * This function is called after a PCI bus error affecting
8654 * this device has been detected.
8655 */
8656 static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
8657 pci_channel_state_t state)
8658 {
8659 struct net_device *netdev = pci_get_drvdata(pdev);
8660 struct s2io_nic *sp = netdev_priv(netdev);
8661
8662 netif_device_detach(netdev);
8663
8664 if (state == pci_channel_io_perm_failure)
8665 return PCI_ERS_RESULT_DISCONNECT;
8666
8667 if (netif_running(netdev)) {
8668 /* Bring down the card, while avoiding PCI I/O */
8669 do_s2io_card_down(sp, 0);
8670 }
8671 pci_disable_device(pdev);
8672
8673 return PCI_ERS_RESULT_NEED_RESET;
8674 }
8675
8676 /**
8677 * s2io_io_slot_reset - called after the pci bus has been reset.
8678 * @pdev: Pointer to PCI device
8679 *
8680 * Restart the card from scratch, as if from a cold-boot.
8681 * At this point, the card has exprienced a hard reset,
8682 * followed by fixups by BIOS, and has its config space
8683 * set up identically to what it was at cold boot.
8684 */
8685 static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
8686 {
8687 struct net_device *netdev = pci_get_drvdata(pdev);
8688 struct s2io_nic *sp = netdev_priv(netdev);
8689
8690 if (pci_enable_device(pdev)) {
8691 pr_err("Cannot re-enable PCI device after reset.\n");
8692 return PCI_ERS_RESULT_DISCONNECT;
8693 }
8694
8695 pci_set_master(pdev);
8696 s2io_reset(sp);
8697
8698 return PCI_ERS_RESULT_RECOVERED;
8699 }
8700
8701 /**
8702 * s2io_io_resume - called when traffic can start flowing again.
8703 * @pdev: Pointer to PCI device
8704 *
8705 * This callback is called when the error recovery driver tells
8706 * us that its OK to resume normal operation.
8707 */
8708 static void s2io_io_resume(struct pci_dev *pdev)
8709 {
8710 struct net_device *netdev = pci_get_drvdata(pdev);
8711 struct s2io_nic *sp = netdev_priv(netdev);
8712
8713 if (netif_running(netdev)) {
8714 if (s2io_card_up(sp)) {
8715 pr_err("Can't bring device back up after reset.\n");
8716 return;
8717 }
8718
8719 if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
8720 s2io_card_down(sp);
8721 pr_err("Can't restore mac addr after reset.\n");
8722 return;
8723 }
8724 }
8725
8726 netif_device_attach(netdev);
8727 netif_tx_wake_all_queues(netdev);
8728 }
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree