enic: Add wrapper routines for new fw devcmds for port profile handling
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / misc / ad525x_dpot.c
blob7cb911028d094ca4416382806191a5e3e4b68e82
1 /*
2 * ad525x_dpot: Driver for the Analog Devices digital potentiometers
3 * Copyright (c) 2009-2010 Analog Devices, Inc.
4 * Author: Michael Hennerich <hennerich@blackfin.uclinux.org>
6 * DEVID #Wipers #Positions Resistor Options (kOhm)
7 * AD5258 1 64 1, 10, 50, 100
8 * AD5259 1 256 5, 10, 50, 100
9 * AD5251 2 64 1, 10, 50, 100
10 * AD5252 2 256 1, 10, 50, 100
11 * AD5255 3 512 25, 250
12 * AD5253 4 64 1, 10, 50, 100
13 * AD5254 4 256 1, 10, 50, 100
14 * AD5160 1 256 5, 10, 50, 100
15 * AD5161 1 256 5, 10, 50, 100
16 * AD5162 2 256 2.5, 10, 50, 100
17 * AD5165 1 256 100
18 * AD5200 1 256 10, 50
19 * AD5201 1 33 10, 50
20 * AD5203 4 64 10, 100
21 * AD5204 4 256 10, 50, 100
22 * AD5206 6 256 10, 50, 100
23 * AD5207 2 256 10, 50, 100
24 * AD5231 1 1024 10, 50, 100
25 * AD5232 2 256 10, 50, 100
26 * AD5233 4 64 10, 50, 100
27 * AD5235 2 1024 25, 250
28 * AD5260 1 256 20, 50, 200
29 * AD5262 2 256 20, 50, 200
30 * AD5263 4 256 20, 50, 200
31 * AD5290 1 256 10, 50, 100
32 * AD5291 1 256 20, 50, 100 (20-TP)
33 * AD5292 1 1024 20, 50, 100 (20-TP)
34 * AD5293 1 1024 20, 50, 100
35 * AD7376 1 128 10, 50, 100, 1M
36 * AD8400 1 256 1, 10, 50, 100
37 * AD8402 2 256 1, 10, 50, 100
38 * AD8403 4 256 1, 10, 50, 100
39 * ADN2850 3 512 25, 250
40 * AD5241 1 256 10, 100, 1M
41 * AD5246 1 128 5, 10, 50, 100
42 * AD5247 1 128 5, 10, 50, 100
43 * AD5245 1 256 5, 10, 50, 100
44 * AD5243 2 256 2.5, 10, 50, 100
45 * AD5248 2 256 2.5, 10, 50, 100
46 * AD5242 2 256 20, 50, 200
47 * AD5280 1 256 20, 50, 200
48 * AD5282 2 256 20, 50, 200
49 * ADN2860 3 512 25, 250
50 * AD5273 1 64 1, 10, 50, 100 (OTP)
51 * AD5171 1 64 5, 10, 50, 100 (OTP)
52 * AD5170 1 256 2.5, 10, 50, 100 (OTP)
53 * AD5172 2 256 2.5, 10, 50, 100 (OTP)
54 * AD5173 2 256 2.5, 10, 50, 100 (OTP)
55 * AD5270 1 1024 20, 50, 100 (50-TP)
56 * AD5271 1 256 20, 50, 100 (50-TP)
57 * AD5272 1 1024 20, 50, 100 (50-TP)
58 * AD5274 1 256 20, 50, 100 (50-TP)
60 * See Documentation/misc-devices/ad525x_dpot.txt for more info.
62 * derived from ad5258.c
63 * Copyright (c) 2009 Cyber Switching, Inc.
64 * Author: Chris Verges <chrisv@cyberswitching.com>
66 * derived from ad5252.c
67 * Copyright (c) 2006 Michael Hennerich <hennerich@blackfin.uclinux.org>
69 * Licensed under the GPL-2 or later.
72 #include <linux/module.h>
73 #include <linux/device.h>
74 #include <linux/kernel.h>
75 #include <linux/init.h>
76 #include <linux/delay.h>
77 #include <linux/slab.h>
79 #define DRIVER_VERSION "0.2"
81 #include "ad525x_dpot.h"
84 * Client data (each client gets its own)
87 struct dpot_data {
88 struct ad_dpot_bus_data bdata;
89 struct mutex update_lock;
90 unsigned rdac_mask;
91 unsigned max_pos;
92 unsigned long devid;
93 unsigned uid;
94 unsigned feat;
95 unsigned wipers;
96 u16 rdac_cache[MAX_RDACS];
97 DECLARE_BITMAP(otp_en_mask, MAX_RDACS);
100 static inline int dpot_read_d8(struct dpot_data *dpot)
102 return dpot->bdata.bops->read_d8(dpot->bdata.client);
105 static inline int dpot_read_r8d8(struct dpot_data *dpot, u8 reg)
107 return dpot->bdata.bops->read_r8d8(dpot->bdata.client, reg);
110 static inline int dpot_read_r8d16(struct dpot_data *dpot, u8 reg)
112 return dpot->bdata.bops->read_r8d16(dpot->bdata.client, reg);
115 static inline int dpot_write_d8(struct dpot_data *dpot, u8 val)
117 return dpot->bdata.bops->write_d8(dpot->bdata.client, val);
120 static inline int dpot_write_r8d8(struct dpot_data *dpot, u8 reg, u16 val)
122 return dpot->bdata.bops->write_r8d8(dpot->bdata.client, reg, val);
125 static inline int dpot_write_r8d16(struct dpot_data *dpot, u8 reg, u16 val)
127 return dpot->bdata.bops->write_r8d16(dpot->bdata.client, reg, val);
130 static s32 dpot_read_spi(struct dpot_data *dpot, u8 reg)
132 unsigned ctrl = 0;
133 int value;
135 if (!(reg & (DPOT_ADDR_EEPROM | DPOT_ADDR_CMD))) {
137 if (dpot->feat & F_RDACS_WONLY)
138 return dpot->rdac_cache[reg & DPOT_RDAC_MASK];
139 if (dpot->uid == DPOT_UID(AD5291_ID) ||
140 dpot->uid == DPOT_UID(AD5292_ID) ||
141 dpot->uid == DPOT_UID(AD5293_ID)) {
143 value = dpot_read_r8d8(dpot,
144 DPOT_AD5291_READ_RDAC << 2);
146 if (dpot->uid == DPOT_UID(AD5291_ID))
147 value = value >> 2;
149 return value;
150 } else if (dpot->uid == DPOT_UID(AD5270_ID) ||
151 dpot->uid == DPOT_UID(AD5271_ID)) {
153 value = dpot_read_r8d8(dpot,
154 DPOT_AD5270_1_2_4_READ_RDAC << 2);
156 if (value < 0)
157 return value;
159 if (dpot->uid == DPOT_UID(AD5271_ID))
160 value = value >> 2;
162 return value;
165 ctrl = DPOT_SPI_READ_RDAC;
166 } else if (reg & DPOT_ADDR_EEPROM) {
167 ctrl = DPOT_SPI_READ_EEPROM;
170 if (dpot->feat & F_SPI_16BIT)
171 return dpot_read_r8d8(dpot, ctrl);
172 else if (dpot->feat & F_SPI_24BIT)
173 return dpot_read_r8d16(dpot, ctrl);
175 return -EFAULT;
178 static s32 dpot_read_i2c(struct dpot_data *dpot, u8 reg)
180 int value;
181 unsigned ctrl = 0;
182 switch (dpot->uid) {
183 case DPOT_UID(AD5246_ID):
184 case DPOT_UID(AD5247_ID):
185 return dpot_read_d8(dpot);
186 case DPOT_UID(AD5245_ID):
187 case DPOT_UID(AD5241_ID):
188 case DPOT_UID(AD5242_ID):
189 case DPOT_UID(AD5243_ID):
190 case DPOT_UID(AD5248_ID):
191 case DPOT_UID(AD5280_ID):
192 case DPOT_UID(AD5282_ID):
193 ctrl = ((reg & DPOT_RDAC_MASK) == DPOT_RDAC0) ?
194 0 : DPOT_AD5282_RDAC_AB;
195 return dpot_read_r8d8(dpot, ctrl);
196 case DPOT_UID(AD5170_ID):
197 case DPOT_UID(AD5171_ID):
198 case DPOT_UID(AD5273_ID):
199 return dpot_read_d8(dpot);
200 case DPOT_UID(AD5172_ID):
201 case DPOT_UID(AD5173_ID):
202 ctrl = ((reg & DPOT_RDAC_MASK) == DPOT_RDAC0) ?
203 0 : DPOT_AD5172_3_A0;
204 return dpot_read_r8d8(dpot, ctrl);
205 case DPOT_UID(AD5272_ID):
206 case DPOT_UID(AD5274_ID):
207 dpot_write_r8d8(dpot,
208 (DPOT_AD5270_1_2_4_READ_RDAC << 2), 0);
210 value = dpot_read_r8d16(dpot,
211 DPOT_AD5270_1_2_4_RDAC << 2);
213 if (value < 0)
214 return value;
216 * AD5272/AD5274 returns high byte first, however
217 * underling smbus expects low byte first.
219 value = swab16(value);
221 if (dpot->uid == DPOT_UID(AD5271_ID))
222 value = value >> 2;
223 return value;
224 default:
225 if ((reg & DPOT_REG_TOL) || (dpot->max_pos > 256))
226 return dpot_read_r8d16(dpot, (reg & 0xF8) |
227 ((reg & 0x7) << 1));
228 else
229 return dpot_read_r8d8(dpot, reg);
233 static s32 dpot_read(struct dpot_data *dpot, u8 reg)
235 if (dpot->feat & F_SPI)
236 return dpot_read_spi(dpot, reg);
237 else
238 return dpot_read_i2c(dpot, reg);
241 static s32 dpot_write_spi(struct dpot_data *dpot, u8 reg, u16 value)
243 unsigned val = 0;
245 if (!(reg & (DPOT_ADDR_EEPROM | DPOT_ADDR_CMD | DPOT_ADDR_OTP))) {
246 if (dpot->feat & F_RDACS_WONLY)
247 dpot->rdac_cache[reg & DPOT_RDAC_MASK] = value;
249 if (dpot->feat & F_AD_APPDATA) {
250 if (dpot->feat & F_SPI_8BIT) {
251 val = ((reg & DPOT_RDAC_MASK) <<
252 DPOT_MAX_POS(dpot->devid)) |
253 value;
254 return dpot_write_d8(dpot, val);
255 } else if (dpot->feat & F_SPI_16BIT) {
256 val = ((reg & DPOT_RDAC_MASK) <<
257 DPOT_MAX_POS(dpot->devid)) |
258 value;
259 return dpot_write_r8d8(dpot, val >> 8,
260 val & 0xFF);
261 } else
262 BUG();
263 } else {
264 if (dpot->uid == DPOT_UID(AD5291_ID) ||
265 dpot->uid == DPOT_UID(AD5292_ID) ||
266 dpot->uid == DPOT_UID(AD5293_ID)) {
268 dpot_write_r8d8(dpot, DPOT_AD5291_CTRLREG << 2,
269 DPOT_AD5291_UNLOCK_CMD);
271 if (dpot->uid == DPOT_UID(AD5291_ID))
272 value = value << 2;
274 return dpot_write_r8d8(dpot,
275 (DPOT_AD5291_RDAC << 2) |
276 (value >> 8), value & 0xFF);
277 } else if (dpot->uid == DPOT_UID(AD5270_ID) ||
278 dpot->uid == DPOT_UID(AD5271_ID)) {
279 dpot_write_r8d8(dpot,
280 DPOT_AD5270_1_2_4_CTRLREG << 2,
281 DPOT_AD5270_1_2_4_UNLOCK_CMD);
283 if (dpot->uid == DPOT_UID(AD5271_ID))
284 value = value << 2;
286 return dpot_write_r8d8(dpot,
287 (DPOT_AD5270_1_2_4_RDAC << 2) |
288 (value >> 8), value & 0xFF);
290 val = DPOT_SPI_RDAC | (reg & DPOT_RDAC_MASK);
292 } else if (reg & DPOT_ADDR_EEPROM) {
293 val = DPOT_SPI_EEPROM | (reg & DPOT_RDAC_MASK);
294 } else if (reg & DPOT_ADDR_CMD) {
295 switch (reg) {
296 case DPOT_DEC_ALL_6DB:
297 val = DPOT_SPI_DEC_ALL_6DB;
298 break;
299 case DPOT_INC_ALL_6DB:
300 val = DPOT_SPI_INC_ALL_6DB;
301 break;
302 case DPOT_DEC_ALL:
303 val = DPOT_SPI_DEC_ALL;
304 break;
305 case DPOT_INC_ALL:
306 val = DPOT_SPI_INC_ALL;
307 break;
309 } else if (reg & DPOT_ADDR_OTP) {
310 if (dpot->uid == DPOT_UID(AD5291_ID) ||
311 dpot->uid == DPOT_UID(AD5292_ID)) {
312 return dpot_write_r8d8(dpot,
313 DPOT_AD5291_STORE_XTPM << 2, 0);
314 } else if (dpot->uid == DPOT_UID(AD5270_ID) ||
315 dpot->uid == DPOT_UID(AD5271_ID)) {
316 return dpot_write_r8d8(dpot,
317 DPOT_AD5270_1_2_4_STORE_XTPM << 2, 0);
319 } else
320 BUG();
322 if (dpot->feat & F_SPI_16BIT)
323 return dpot_write_r8d8(dpot, val, value);
324 else if (dpot->feat & F_SPI_24BIT)
325 return dpot_write_r8d16(dpot, val, value);
327 return -EFAULT;
330 static s32 dpot_write_i2c(struct dpot_data *dpot, u8 reg, u16 value)
332 /* Only write the instruction byte for certain commands */
333 unsigned tmp = 0, ctrl = 0;
335 switch (dpot->uid) {
336 case DPOT_UID(AD5246_ID):
337 case DPOT_UID(AD5247_ID):
338 return dpot_write_d8(dpot, value);
339 break;
341 case DPOT_UID(AD5245_ID):
342 case DPOT_UID(AD5241_ID):
343 case DPOT_UID(AD5242_ID):
344 case DPOT_UID(AD5243_ID):
345 case DPOT_UID(AD5248_ID):
346 case DPOT_UID(AD5280_ID):
347 case DPOT_UID(AD5282_ID):
348 ctrl = ((reg & DPOT_RDAC_MASK) == DPOT_RDAC0) ?
349 0 : DPOT_AD5282_RDAC_AB;
350 return dpot_write_r8d8(dpot, ctrl, value);
351 break;
352 case DPOT_UID(AD5171_ID):
353 case DPOT_UID(AD5273_ID):
354 if (reg & DPOT_ADDR_OTP) {
355 tmp = dpot_read_d8(dpot);
356 if (tmp >> 6) /* Ready to Program? */
357 return -EFAULT;
358 ctrl = DPOT_AD5273_FUSE;
360 return dpot_write_r8d8(dpot, ctrl, value);
361 break;
362 case DPOT_UID(AD5172_ID):
363 case DPOT_UID(AD5173_ID):
364 ctrl = ((reg & DPOT_RDAC_MASK) == DPOT_RDAC0) ?
365 0 : DPOT_AD5172_3_A0;
366 if (reg & DPOT_ADDR_OTP) {
367 tmp = dpot_read_r8d16(dpot, ctrl);
368 if (tmp >> 14) /* Ready to Program? */
369 return -EFAULT;
370 ctrl |= DPOT_AD5170_2_3_FUSE;
372 return dpot_write_r8d8(dpot, ctrl, value);
373 break;
374 case DPOT_UID(AD5170_ID):
375 if (reg & DPOT_ADDR_OTP) {
376 tmp = dpot_read_r8d16(dpot, tmp);
377 if (tmp >> 14) /* Ready to Program? */
378 return -EFAULT;
379 ctrl = DPOT_AD5170_2_3_FUSE;
381 return dpot_write_r8d8(dpot, ctrl, value);
382 break;
383 case DPOT_UID(AD5272_ID):
384 case DPOT_UID(AD5274_ID):
385 dpot_write_r8d8(dpot, DPOT_AD5270_1_2_4_CTRLREG << 2,
386 DPOT_AD5270_1_2_4_UNLOCK_CMD);
388 if (reg & DPOT_ADDR_OTP)
389 return dpot_write_r8d8(dpot,
390 DPOT_AD5270_1_2_4_STORE_XTPM << 2, 0);
392 if (dpot->uid == DPOT_UID(AD5274_ID))
393 value = value << 2;
395 return dpot_write_r8d8(dpot, (DPOT_AD5270_1_2_4_RDAC << 2) |
396 (value >> 8), value & 0xFF);
397 break;
398 default:
399 if (reg & DPOT_ADDR_CMD)
400 return dpot_write_d8(dpot, reg);
402 if (dpot->max_pos > 256)
403 return dpot_write_r8d16(dpot, (reg & 0xF8) |
404 ((reg & 0x7) << 1), value);
405 else
406 /* All other registers require instruction + data bytes */
407 return dpot_write_r8d8(dpot, reg, value);
411 static s32 dpot_write(struct dpot_data *dpot, u8 reg, u16 value)
413 if (dpot->feat & F_SPI)
414 return dpot_write_spi(dpot, reg, value);
415 else
416 return dpot_write_i2c(dpot, reg, value);
419 /* sysfs functions */
421 static ssize_t sysfs_show_reg(struct device *dev,
422 struct device_attribute *attr,
423 char *buf, u32 reg)
425 struct dpot_data *data = dev_get_drvdata(dev);
426 s32 value;
428 if (reg & DPOT_ADDR_OTP_EN)
429 return sprintf(buf, "%s\n",
430 test_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask) ?
431 "enabled" : "disabled");
434 mutex_lock(&data->update_lock);
435 value = dpot_read(data, reg);
436 mutex_unlock(&data->update_lock);
438 if (value < 0)
439 return -EINVAL;
441 * Let someone else deal with converting this ...
442 * the tolerance is a two-byte value where the MSB
443 * is a sign + integer value, and the LSB is a
444 * decimal value. See page 18 of the AD5258
445 * datasheet (Rev. A) for more details.
448 if (reg & DPOT_REG_TOL)
449 return sprintf(buf, "0x%04x\n", value & 0xFFFF);
450 else
451 return sprintf(buf, "%u\n", value & data->rdac_mask);
454 static ssize_t sysfs_set_reg(struct device *dev,
455 struct device_attribute *attr,
456 const char *buf, size_t count, u32 reg)
458 struct dpot_data *data = dev_get_drvdata(dev);
459 unsigned long value;
460 int err;
462 if (reg & DPOT_ADDR_OTP_EN) {
463 if (!strncmp(buf, "enabled", sizeof("enabled")))
464 set_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask);
465 else
466 clear_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask);
468 return count;
471 if ((reg & DPOT_ADDR_OTP) &&
472 !test_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask))
473 return -EPERM;
475 err = strict_strtoul(buf, 10, &value);
476 if (err)
477 return err;
479 if (value > data->rdac_mask)
480 value = data->rdac_mask;
482 mutex_lock(&data->update_lock);
483 dpot_write(data, reg, value);
484 if (reg & DPOT_ADDR_EEPROM)
485 msleep(26); /* Sleep while the EEPROM updates */
486 else if (reg & DPOT_ADDR_OTP)
487 msleep(400); /* Sleep while the OTP updates */
488 mutex_unlock(&data->update_lock);
490 return count;
493 static ssize_t sysfs_do_cmd(struct device *dev,
494 struct device_attribute *attr,
495 const char *buf, size_t count, u32 reg)
497 struct dpot_data *data = dev_get_drvdata(dev);
499 mutex_lock(&data->update_lock);
500 dpot_write(data, reg, 0);
501 mutex_unlock(&data->update_lock);
503 return count;
506 /* ------------------------------------------------------------------------- */
508 #define DPOT_DEVICE_SHOW(_name, _reg) static ssize_t \
509 show_##_name(struct device *dev, \
510 struct device_attribute *attr, char *buf) \
512 return sysfs_show_reg(dev, attr, buf, _reg); \
515 #define DPOT_DEVICE_SET(_name, _reg) static ssize_t \
516 set_##_name(struct device *dev, \
517 struct device_attribute *attr, \
518 const char *buf, size_t count) \
520 return sysfs_set_reg(dev, attr, buf, count, _reg); \
523 #define DPOT_DEVICE_SHOW_SET(name, reg) \
524 DPOT_DEVICE_SHOW(name, reg) \
525 DPOT_DEVICE_SET(name, reg) \
526 static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, set_##name);
528 #define DPOT_DEVICE_SHOW_ONLY(name, reg) \
529 DPOT_DEVICE_SHOW(name, reg) \
530 static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, NULL);
532 DPOT_DEVICE_SHOW_SET(rdac0, DPOT_ADDR_RDAC | DPOT_RDAC0);
533 DPOT_DEVICE_SHOW_SET(eeprom0, DPOT_ADDR_EEPROM | DPOT_RDAC0);
534 DPOT_DEVICE_SHOW_ONLY(tolerance0, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC0);
535 DPOT_DEVICE_SHOW_SET(otp0, DPOT_ADDR_OTP | DPOT_RDAC0);
536 DPOT_DEVICE_SHOW_SET(otp0en, DPOT_ADDR_OTP_EN | DPOT_RDAC0);
538 DPOT_DEVICE_SHOW_SET(rdac1, DPOT_ADDR_RDAC | DPOT_RDAC1);
539 DPOT_DEVICE_SHOW_SET(eeprom1, DPOT_ADDR_EEPROM | DPOT_RDAC1);
540 DPOT_DEVICE_SHOW_ONLY(tolerance1, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC1);
541 DPOT_DEVICE_SHOW_SET(otp1, DPOT_ADDR_OTP | DPOT_RDAC1);
542 DPOT_DEVICE_SHOW_SET(otp1en, DPOT_ADDR_OTP_EN | DPOT_RDAC1);
544 DPOT_DEVICE_SHOW_SET(rdac2, DPOT_ADDR_RDAC | DPOT_RDAC2);
545 DPOT_DEVICE_SHOW_SET(eeprom2, DPOT_ADDR_EEPROM | DPOT_RDAC2);
546 DPOT_DEVICE_SHOW_ONLY(tolerance2, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC2);
547 DPOT_DEVICE_SHOW_SET(otp2, DPOT_ADDR_OTP | DPOT_RDAC2);
548 DPOT_DEVICE_SHOW_SET(otp2en, DPOT_ADDR_OTP_EN | DPOT_RDAC2);
550 DPOT_DEVICE_SHOW_SET(rdac3, DPOT_ADDR_RDAC | DPOT_RDAC3);
551 DPOT_DEVICE_SHOW_SET(eeprom3, DPOT_ADDR_EEPROM | DPOT_RDAC3);
552 DPOT_DEVICE_SHOW_ONLY(tolerance3, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC3);
553 DPOT_DEVICE_SHOW_SET(otp3, DPOT_ADDR_OTP | DPOT_RDAC3);
554 DPOT_DEVICE_SHOW_SET(otp3en, DPOT_ADDR_OTP_EN | DPOT_RDAC3);
556 DPOT_DEVICE_SHOW_SET(rdac4, DPOT_ADDR_RDAC | DPOT_RDAC4);
557 DPOT_DEVICE_SHOW_SET(eeprom4, DPOT_ADDR_EEPROM | DPOT_RDAC4);
558 DPOT_DEVICE_SHOW_ONLY(tolerance4, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC4);
559 DPOT_DEVICE_SHOW_SET(otp4, DPOT_ADDR_OTP | DPOT_RDAC4);
560 DPOT_DEVICE_SHOW_SET(otp4en, DPOT_ADDR_OTP_EN | DPOT_RDAC4);
562 DPOT_DEVICE_SHOW_SET(rdac5, DPOT_ADDR_RDAC | DPOT_RDAC5);
563 DPOT_DEVICE_SHOW_SET(eeprom5, DPOT_ADDR_EEPROM | DPOT_RDAC5);
564 DPOT_DEVICE_SHOW_ONLY(tolerance5, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC5);
565 DPOT_DEVICE_SHOW_SET(otp5, DPOT_ADDR_OTP | DPOT_RDAC5);
566 DPOT_DEVICE_SHOW_SET(otp5en, DPOT_ADDR_OTP_EN | DPOT_RDAC5);
568 static const struct attribute *dpot_attrib_wipers[] = {
569 &dev_attr_rdac0.attr,
570 &dev_attr_rdac1.attr,
571 &dev_attr_rdac2.attr,
572 &dev_attr_rdac3.attr,
573 &dev_attr_rdac4.attr,
574 &dev_attr_rdac5.attr,
575 NULL
578 static const struct attribute *dpot_attrib_eeprom[] = {
579 &dev_attr_eeprom0.attr,
580 &dev_attr_eeprom1.attr,
581 &dev_attr_eeprom2.attr,
582 &dev_attr_eeprom3.attr,
583 &dev_attr_eeprom4.attr,
584 &dev_attr_eeprom5.attr,
585 NULL
588 static const struct attribute *dpot_attrib_otp[] = {
589 &dev_attr_otp0.attr,
590 &dev_attr_otp1.attr,
591 &dev_attr_otp2.attr,
592 &dev_attr_otp3.attr,
593 &dev_attr_otp4.attr,
594 &dev_attr_otp5.attr,
595 NULL
598 static const struct attribute *dpot_attrib_otp_en[] = {
599 &dev_attr_otp0en.attr,
600 &dev_attr_otp1en.attr,
601 &dev_attr_otp2en.attr,
602 &dev_attr_otp3en.attr,
603 &dev_attr_otp4en.attr,
604 &dev_attr_otp5en.attr,
605 NULL
608 static const struct attribute *dpot_attrib_tolerance[] = {
609 &dev_attr_tolerance0.attr,
610 &dev_attr_tolerance1.attr,
611 &dev_attr_tolerance2.attr,
612 &dev_attr_tolerance3.attr,
613 &dev_attr_tolerance4.attr,
614 &dev_attr_tolerance5.attr,
615 NULL
618 /* ------------------------------------------------------------------------- */
620 #define DPOT_DEVICE_DO_CMD(_name, _cmd) static ssize_t \
621 set_##_name(struct device *dev, \
622 struct device_attribute *attr, \
623 const char *buf, size_t count) \
625 return sysfs_do_cmd(dev, attr, buf, count, _cmd); \
627 static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, NULL, set_##_name);
629 DPOT_DEVICE_DO_CMD(inc_all, DPOT_INC_ALL);
630 DPOT_DEVICE_DO_CMD(dec_all, DPOT_DEC_ALL);
631 DPOT_DEVICE_DO_CMD(inc_all_6db, DPOT_INC_ALL_6DB);
632 DPOT_DEVICE_DO_CMD(dec_all_6db, DPOT_DEC_ALL_6DB);
634 static struct attribute *ad525x_attributes_commands[] = {
635 &dev_attr_inc_all.attr,
636 &dev_attr_dec_all.attr,
637 &dev_attr_inc_all_6db.attr,
638 &dev_attr_dec_all_6db.attr,
639 NULL
642 static const struct attribute_group ad525x_group_commands = {
643 .attrs = ad525x_attributes_commands,
646 __devinit int ad_dpot_add_files(struct device *dev,
647 unsigned features, unsigned rdac)
649 int err = sysfs_create_file(&dev->kobj,
650 dpot_attrib_wipers[rdac]);
651 if (features & F_CMD_EEP)
652 err |= sysfs_create_file(&dev->kobj,
653 dpot_attrib_eeprom[rdac]);
654 if (features & F_CMD_TOL)
655 err |= sysfs_create_file(&dev->kobj,
656 dpot_attrib_tolerance[rdac]);
657 if (features & F_CMD_OTP) {
658 err |= sysfs_create_file(&dev->kobj,
659 dpot_attrib_otp_en[rdac]);
660 err |= sysfs_create_file(&dev->kobj,
661 dpot_attrib_otp[rdac]);
664 if (err)
665 dev_err(dev, "failed to register sysfs hooks for RDAC%d\n",
666 rdac);
668 return err;
671 inline void ad_dpot_remove_files(struct device *dev,
672 unsigned features, unsigned rdac)
674 sysfs_remove_file(&dev->kobj,
675 dpot_attrib_wipers[rdac]);
676 if (features & F_CMD_EEP)
677 sysfs_remove_file(&dev->kobj,
678 dpot_attrib_eeprom[rdac]);
679 if (features & F_CMD_TOL)
680 sysfs_remove_file(&dev->kobj,
681 dpot_attrib_tolerance[rdac]);
682 if (features & F_CMD_OTP) {
683 sysfs_remove_file(&dev->kobj,
684 dpot_attrib_otp_en[rdac]);
685 sysfs_remove_file(&dev->kobj,
686 dpot_attrib_otp[rdac]);
690 __devinit int ad_dpot_probe(struct device *dev,
691 struct ad_dpot_bus_data *bdata, const struct ad_dpot_id *id)
694 struct dpot_data *data;
695 int i, err = 0;
697 data = kzalloc(sizeof(struct dpot_data), GFP_KERNEL);
698 if (!data) {
699 err = -ENOMEM;
700 goto exit;
703 dev_set_drvdata(dev, data);
704 mutex_init(&data->update_lock);
706 data->bdata = *bdata;
707 data->devid = id->devid;
709 data->max_pos = 1 << DPOT_MAX_POS(data->devid);
710 data->rdac_mask = data->max_pos - 1;
711 data->feat = DPOT_FEAT(data->devid);
712 data->uid = DPOT_UID(data->devid);
713 data->wipers = DPOT_WIPERS(data->devid);
715 for (i = DPOT_RDAC0; i < MAX_RDACS; i++)
716 if (data->wipers & (1 << i)) {
717 err = ad_dpot_add_files(dev, data->feat, i);
718 if (err)
719 goto exit_remove_files;
720 /* power-up midscale */
721 if (data->feat & F_RDACS_WONLY)
722 data->rdac_cache[i] = data->max_pos / 2;
725 if (data->feat & F_CMD_INC)
726 err = sysfs_create_group(&dev->kobj, &ad525x_group_commands);
728 if (err) {
729 dev_err(dev, "failed to register sysfs hooks\n");
730 goto exit_free;
733 dev_info(dev, "%s %d-Position Digital Potentiometer registered\n",
734 id->name, data->max_pos);
736 return 0;
738 exit_remove_files:
739 for (i = DPOT_RDAC0; i < MAX_RDACS; i++)
740 if (data->wipers & (1 << i))
741 ad_dpot_remove_files(dev, data->feat, i);
743 exit_free:
744 kfree(data);
745 dev_set_drvdata(dev, NULL);
746 exit:
747 dev_err(dev, "failed to create client for %s ID 0x%lX\n",
748 id->name, id->devid);
749 return err;
751 EXPORT_SYMBOL(ad_dpot_probe);
753 __devexit int ad_dpot_remove(struct device *dev)
755 struct dpot_data *data = dev_get_drvdata(dev);
756 int i;
758 for (i = DPOT_RDAC0; i < MAX_RDACS; i++)
759 if (data->wipers & (1 << i))
760 ad_dpot_remove_files(dev, data->feat, i);
762 kfree(data);
764 return 0;
766 EXPORT_SYMBOL(ad_dpot_remove);
769 MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>, "
770 "Michael Hennerich <hennerich@blackfin.uclinux.org>");
771 MODULE_DESCRIPTION("Digital potentiometer driver");
772 MODULE_LICENSE("GPL");
773 MODULE_VERSION(DRIVER_VERSION);