?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
net: Detect and ignore netif_stop_queue() calls before register_netdev()
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / serial / pmac_zilog.c
blob5b9cde79e4eaf5c3f686f7b056952e04b1eef027
1 /*
2 * linux/drivers/serial/pmac_zilog.c
3 *
4 * Driver for PowerMac Z85c30 based ESCC cell found in the
5 * "macio" ASICs of various PowerMac models
6 *
7 * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
8 *
9 * Derived from drivers/macintosh/macserial.c by Paul Mackerras
10 * and drivers/serial/sunzilog.c by David S. Miller
11 *
12 * Hrm... actually, I ripped most of sunzilog (Thanks David !) and
13 * adapted special tweaks needed for us. I don't think it's worth
14 * merging back those though. The DMA code still has to get in
15 * and once done, I expect that driver to remain fairly stable in
16 * the long term, unless we change the driver model again...
17 *
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License as published by
20 * the Free Software Foundation; either version 2 of the License, or
21 * (at your option) any later version.
22 *
23 * This program is distributed in the hope that it will be useful,
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
27 *
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
31 *
32 * 2004-08-06 Harald Welte <laforge@gnumonks.org>
33 * - Enable BREAK interrupt
34 * - Add support for sysreq
35 *
36 * TODO: - Add DMA support
37 * - Defer port shutdown to a few seconds after close
38 * - maybe put something right into uap->clk_divisor
39 */
40
41 #undef DEBUG
42 #undef DEBUG_HARD
43 #undef USE_CTRL_O_SYSRQ
44
45 #include <linux/module.h>
46 #include <linux/tty.h>
47
48 #include <linux/tty_flip.h>
49 #include <linux/major.h>
50 #include <linux/string.h>
51 #include <linux/fcntl.h>
52 #include <linux/mm.h>
53 #include <linux/kernel.h>
54 #include <linux/delay.h>
55 #include <linux/init.h>
56 #include <linux/console.h>
57 #include <linux/adb.h>
58 #include <linux/pmu.h>
59 #include <linux/bitops.h>
60 #include <linux/sysrq.h>
61 #include <linux/mutex.h>
62 #include <asm/sections.h>
63 #include <asm/io.h>
64 #include <asm/irq.h>
65
66 #ifdef CONFIG_PPC_PMAC
67 #include <asm/prom.h>
68 #include <asm/machdep.h>
69 #include <asm/pmac_feature.h>
70 #include <asm/dbdma.h>
71 #include <asm/macio.h>
72 #else
73 #include <linux/platform_device.h>
74 #define of_machine_is_compatible(x) (0)
75 #endif
76
77 #if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
78 #define SUPPORT_SYSRQ
79 #endif
80
81 #include <linux/serial.h>
82 #include <linux/serial_core.h>
83
84 #include "pmac_zilog.h"
85
86 /* Not yet implemented */
87 #undef HAS_DBDMA
88
89 static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
90 MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
91 MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports.");
92 MODULE_LICENSE("GPL");
93
94 #ifdef CONFIG_SERIAL_PMACZILOG_TTYS
95 #define PMACZILOG_MAJOR TTY_MAJOR
96 #define PMACZILOG_MINOR 64
97 #define PMACZILOG_NAME "ttyS"
98 #else
99 #define PMACZILOG_MAJOR 204
100 #define PMACZILOG_MINOR 192
101 #define PMACZILOG_NAME "ttyPZ"
102 #endif
103
104
105 /*
106 * For the sake of early serial console, we can do a pre-probe
107 * (optional) of the ports at rather early boot time.
108 */
109 static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS];
110 static int pmz_ports_count;
111 static DEFINE_MUTEX(pmz_irq_mutex);
112
113 static struct uart_driver pmz_uart_reg = {
114 .owner = THIS_MODULE,
115 .driver_name = PMACZILOG_NAME,
116 .dev_name = PMACZILOG_NAME,
117 .major = PMACZILOG_MAJOR,
118 .minor = PMACZILOG_MINOR,
119 };
120
121
122 /*
123 * Load all registers to reprogram the port
124 * This function must only be called when the TX is not busy. The UART
125 * port lock must be held and local interrupts disabled.
126 */
127 static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
128 {
129 int i;
130
131 if (ZS_IS_ASLEEP(uap))
132 return;
133
134 /* Let pending transmits finish. */
135 for (i = 0; i < 1000; i++) {
136 unsigned char stat = read_zsreg(uap, R1);
137 if (stat & ALL_SNT)
138 break;
139 udelay(100);
140 }
141
142 ZS_CLEARERR(uap);
143 zssync(uap);
144 ZS_CLEARFIFO(uap);
145 zssync(uap);
146 ZS_CLEARERR(uap);
147
148 /* Disable all interrupts. */
149 write_zsreg(uap, R1,
150 regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
151
152 /* Set parity, sync config, stop bits, and clock divisor. */
153 write_zsreg(uap, R4, regs[R4]);
154
155 /* Set misc. TX/RX control bits. */
156 write_zsreg(uap, R10, regs[R10]);
157
158 /* Set TX/RX controls sans the enable bits. */
159 write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
160 write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
161
162 /* now set R7 "prime" on ESCC */
163 write_zsreg(uap, R15, regs[R15] | EN85C30);
164 write_zsreg(uap, R7, regs[R7P]);
165
166 /* make sure we use R7 "non-prime" on ESCC */
167 write_zsreg(uap, R15, regs[R15] & ~EN85C30);
168
169 /* Synchronous mode config. */
170 write_zsreg(uap, R6, regs[R6]);
171 write_zsreg(uap, R7, regs[R7]);
172
173 /* Disable baud generator. */
174 write_zsreg(uap, R14, regs[R14] & ~BRENAB);
175
176 /* Clock mode control. */
177 write_zsreg(uap, R11, regs[R11]);
178
179 /* Lower and upper byte of baud rate generator divisor. */
180 write_zsreg(uap, R12, regs[R12]);
181 write_zsreg(uap, R13, regs[R13]);
182
183 /* Now rewrite R14, with BRENAB (if set). */
184 write_zsreg(uap, R14, regs[R14]);
185
186 /* Reset external status interrupts. */
187 write_zsreg(uap, R0, RES_EXT_INT);
188 write_zsreg(uap, R0, RES_EXT_INT);
189
190 /* Rewrite R3/R5, this time without enables masked. */
191 write_zsreg(uap, R3, regs[R3]);
192 write_zsreg(uap, R5, regs[R5]);
193
194 /* Rewrite R1, this time without IRQ enabled masked. */
195 write_zsreg(uap, R1, regs[R1]);
196
197 /* Enable interrupts */
198 write_zsreg(uap, R9, regs[R9]);
199 }
200
201 /*
202 * We do like sunzilog to avoid disrupting pending Tx
203 * Reprogram the Zilog channel HW registers with the copies found in the
204 * software state struct. If the transmitter is busy, we defer this update
205 * until the next TX complete interrupt. Else, we do it right now.
206 *
207 * The UART port lock must be held and local interrupts disabled.
208 */
209 static void pmz_maybe_update_regs(struct uart_pmac_port *uap)
210 {
211 if (!ZS_REGS_HELD(uap)) {
212 if (ZS_TX_ACTIVE(uap)) {
213 uap->flags |= PMACZILOG_FLAG_REGS_HELD;
214 } else {
215 pmz_debug("pmz: maybe_update_regs: updating\n");
216 pmz_load_zsregs(uap, uap->curregs);
217 }
218 }
219 }
220
221 static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
222 {
223 struct tty_struct *tty = NULL;
224 unsigned char ch, r1, drop, error, flag;
225 int loops = 0;
226
227 /* The interrupt can be enabled when the port isn't open, typically
228 * that happens when using one port is open and the other closed (stale
229 * interrupt) or when one port is used as a console.
230 */
231 if (!ZS_IS_OPEN(uap)) {
232 pmz_debug("pmz: draining input\n");
233 /* Port is closed, drain input data */
234 for (;;) {
235 if ((++loops) > 1000)
236 goto flood;
237 (void)read_zsreg(uap, R1);
238 write_zsreg(uap, R0, ERR_RES);
239 (void)read_zsdata(uap);
240 ch = read_zsreg(uap, R0);
241 if (!(ch & Rx_CH_AV))
242 break;
243 }
244 return NULL;
245 }
246
247 /* Sanity check, make sure the old bug is no longer happening */
248 if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
249 WARN_ON(1);
250 (void)read_zsdata(uap);
251 return NULL;
252 }
253 tty = uap->port.state->port.tty;
254
255 while (1) {
256 error = 0;
257 drop = 0;
258
259 r1 = read_zsreg(uap, R1);
260 ch = read_zsdata(uap);
261
262 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
263 write_zsreg(uap, R0, ERR_RES);
264 zssync(uap);
265 }
266
267 ch &= uap->parity_mask;
268 if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) {
269 uap->flags &= ~PMACZILOG_FLAG_BREAK;
270 }
271
272 #if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE)
273 #ifdef USE_CTRL_O_SYSRQ
274 /* Handle the SysRq ^O Hack */
275 if (ch == '\x0f') {
276 uap->port.sysrq = jiffies + HZ*5;
277 goto next_char;
278 }
279 #endif /* USE_CTRL_O_SYSRQ */
280 if (uap->port.sysrq) {
281 int swallow;
282 spin_unlock(&uap->port.lock);
283 swallow = uart_handle_sysrq_char(&uap->port, ch);
284 spin_lock(&uap->port.lock);
285 if (swallow)
286 goto next_char;
287 }
288 #endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */
289
290 /* A real serial line, record the character and status. */
291 if (drop)
292 goto next_char;
293
294 flag = TTY_NORMAL;
295 uap->port.icount.rx++;
296
297 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) {
298 error = 1;
299 if (r1 & BRK_ABRT) {
300 pmz_debug("pmz: got break !\n");
301 r1 &= ~(PAR_ERR | CRC_ERR);
302 uap->port.icount.brk++;
303 if (uart_handle_break(&uap->port))
304 goto next_char;
305 }
306 else if (r1 & PAR_ERR)
307 uap->port.icount.parity++;
308 else if (r1 & CRC_ERR)
309 uap->port.icount.frame++;
310 if (r1 & Rx_OVR)
311 uap->port.icount.overrun++;
312 r1 &= uap->port.read_status_mask;
313 if (r1 & BRK_ABRT)
314 flag = TTY_BREAK;
315 else if (r1 & PAR_ERR)
316 flag = TTY_PARITY;
317 else if (r1 & CRC_ERR)
318 flag = TTY_FRAME;
319 }
320
321 if (uap->port.ignore_status_mask == 0xff ||
322 (r1 & uap->port.ignore_status_mask) == 0) {
323 tty_insert_flip_char(tty, ch, flag);
324 }
325 if (r1 & Rx_OVR)
326 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
327 next_char:
328 /* We can get stuck in an infinite loop getting char 0 when the
329 * line is in a wrong HW state, we break that here.
330 * When that happens, I disable the receive side of the driver.
331 * Note that what I've been experiencing is a real irq loop where
332 * I'm getting flooded regardless of the actual port speed.
333 * Something stange is going on with the HW
334 */
335 if ((++loops) > 1000)
336 goto flood;
337 ch = read_zsreg(uap, R0);
338 if (!(ch & Rx_CH_AV))
339 break;
340 }
341
342 return tty;
343 flood:
344 uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
345 write_zsreg(uap, R1, uap->curregs[R1]);
346 zssync(uap);
347 pmz_error("pmz: rx irq flood !\n");
348 return tty;
349 }
350
351 static void pmz_status_handle(struct uart_pmac_port *uap)
352 {
353 unsigned char status;
354
355 status = read_zsreg(uap, R0);
356 write_zsreg(uap, R0, RES_EXT_INT);
357 zssync(uap);
358
359 if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) {
360 if (status & SYNC_HUNT)
361 uap->port.icount.dsr++;
362
363 /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
364 * But it does not tell us which bit has changed, we have to keep
365 * track of this ourselves.
366 * The CTS input is inverted for some reason. -- paulus
367 */
368 if ((status ^ uap->prev_status) & DCD)
369 uart_handle_dcd_change(&uap->port,
370 (status & DCD));
371 if ((status ^ uap->prev_status) & CTS)
372 uart_handle_cts_change(&uap->port,
373 !(status & CTS));
374
375 wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
376 }
377
378 if (status & BRK_ABRT)
379 uap->flags |= PMACZILOG_FLAG_BREAK;
380
381 uap->prev_status = status;
382 }
383
384 static void pmz_transmit_chars(struct uart_pmac_port *uap)
385 {
386 struct circ_buf *xmit;
387
388 if (ZS_IS_ASLEEP(uap))
389 return;
390 if (ZS_IS_CONS(uap)) {
391 unsigned char status = read_zsreg(uap, R0);
392
393 /* TX still busy? Just wait for the next TX done interrupt.
394 *
395 * It can occur because of how we do serial console writes. It would
396 * be nice to transmit console writes just like we normally would for
397 * a TTY line. (ie. buffered and TX interrupt driven). That is not
398 * easy because console writes cannot sleep. One solution might be
399 * to poll on enough port->xmit space becomming free. -DaveM
400 */
401 if (!(status & Tx_BUF_EMP))
402 return;
403 }
404
405 uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE;
406
407 if (ZS_REGS_HELD(uap)) {
408 pmz_load_zsregs(uap, uap->curregs);
409 uap->flags &= ~PMACZILOG_FLAG_REGS_HELD;
410 }
411
412 if (ZS_TX_STOPPED(uap)) {
413 uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
414 goto ack_tx_int;
415 }
416
417 /* Under some circumstances, we see interrupts reported for
418 * a closed channel. The interrupt mask in R1 is clear, but
419 * R3 still signals the interrupts and we see them when taking
420 * an interrupt for the other channel (this could be a qemu
421 * bug but since the ESCC doc doesn't specify precsiely whether
422 * R3 interrup status bits are masked by R1 interrupt enable
423 * bits, better safe than sorry). --BenH.
424 */
425 if (!ZS_IS_OPEN(uap))
426 goto ack_tx_int;
427
428 if (uap->port.x_char) {
429 uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
430 write_zsdata(uap, uap->port.x_char);
431 zssync(uap);
432 uap->port.icount.tx++;
433 uap->port.x_char = 0;
434 return;
435 }
436
437 if (uap->port.state == NULL)
438 goto ack_tx_int;
439 xmit = &uap->port.state->xmit;
440 if (uart_circ_empty(xmit)) {
441 uart_write_wakeup(&uap->port);
442 goto ack_tx_int;
443 }
444 if (uart_tx_stopped(&uap->port))
445 goto ack_tx_int;
446
447 uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
448 write_zsdata(uap, xmit->buf[xmit->tail]);
449 zssync(uap);
450
451 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
452 uap->port.icount.tx++;
453
454 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
455 uart_write_wakeup(&uap->port);
456
457 return;
458
459 ack_tx_int:
460 write_zsreg(uap, R0, RES_Tx_P);
461 zssync(uap);
462 }
463
464 /* Hrm... we register that twice, fixme later.... */
465 static irqreturn_t pmz_interrupt(int irq, void *dev_id)
466 {
467 struct uart_pmac_port *uap = dev_id;
468 struct uart_pmac_port *uap_a;
469 struct uart_pmac_port *uap_b;
470 int rc = IRQ_NONE;
471 struct tty_struct *tty;
472 u8 r3;
473
474 uap_a = pmz_get_port_A(uap);
475 uap_b = uap_a->mate;
476
477 spin_lock(&uap_a->port.lock);
478 r3 = read_zsreg(uap_a, R3);
479
480 #ifdef DEBUG_HARD
481 pmz_debug("irq, r3: %x\n", r3);
482 #endif
483 /* Channel A */
484 tty = NULL;
485 if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
486 write_zsreg(uap_a, R0, RES_H_IUS);
487 zssync(uap_a);
488 if (r3 & CHAEXT)
489 pmz_status_handle(uap_a);
490 if (r3 & CHARxIP)
491 tty = pmz_receive_chars(uap_a);
492 if (r3 & CHATxIP)
493 pmz_transmit_chars(uap_a);
494 rc = IRQ_HANDLED;
495 }
496 spin_unlock(&uap_a->port.lock);
497 if (tty != NULL)
498 tty_flip_buffer_push(tty);
499
500 if (uap_b->node == NULL)
501 goto out;
502
503 spin_lock(&uap_b->port.lock);
504 tty = NULL;
505 if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
506 write_zsreg(uap_b, R0, RES_H_IUS);
507 zssync(uap_b);
508 if (r3 & CHBEXT)
509 pmz_status_handle(uap_b);
510 if (r3 & CHBRxIP)
511 tty = pmz_receive_chars(uap_b);
512 if (r3 & CHBTxIP)
513 pmz_transmit_chars(uap_b);
514 rc = IRQ_HANDLED;
515 }
516 spin_unlock(&uap_b->port.lock);
517 if (tty != NULL)
518 tty_flip_buffer_push(tty);
519
520 out:
521 #ifdef DEBUG_HARD
522 pmz_debug("irq done.\n");
523 #endif
524 return rc;
525 }
526
527 /*
528 * Peek the status register, lock not held by caller
529 */
530 static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
531 {
532 unsigned long flags;
533 u8 status;
534
535 spin_lock_irqsave(&uap->port.lock, flags);
536 status = read_zsreg(uap, R0);
537 spin_unlock_irqrestore(&uap->port.lock, flags);
538
539 return status;
540 }
541
542 /*
543 * Check if transmitter is empty
544 * The port lock is not held.
545 */
546 static unsigned int pmz_tx_empty(struct uart_port *port)
547 {
548 struct uart_pmac_port *uap = to_pmz(port);
549 unsigned char status;
550
551 if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
552 return TIOCSER_TEMT;
553
554 status = pmz_peek_status(to_pmz(port));
555 if (status & Tx_BUF_EMP)
556 return TIOCSER_TEMT;
557 return 0;
558 }
559
560 /*
561 * Set Modem Control (RTS & DTR) bits
562 * The port lock is held and interrupts are disabled.
563 * Note: Shall we really filter out RTS on external ports or
564 * should that be dealt at higher level only ?
565 */
566 static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
567 {
568 struct uart_pmac_port *uap = to_pmz(port);
569 unsigned char set_bits, clear_bits;
570
571 /* Do nothing for irda for now... */
572 if (ZS_IS_IRDA(uap))
573 return;
574 /* We get called during boot with a port not up yet */
575 if (ZS_IS_ASLEEP(uap) ||
576 !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
577 return;
578
579 set_bits = clear_bits = 0;
580
581 if (ZS_IS_INTMODEM(uap)) {
582 if (mctrl & TIOCM_RTS)
583 set_bits |= RTS;
584 else
585 clear_bits |= RTS;
586 }
587 if (mctrl & TIOCM_DTR)
588 set_bits |= DTR;
589 else
590 clear_bits |= DTR;
591
592 /* NOTE: Not subject to 'transmitter active' rule. */
593 uap->curregs[R5] |= set_bits;
594 uap->curregs[R5] &= ~clear_bits;
595 if (ZS_IS_ASLEEP(uap))
596 return;
597 write_zsreg(uap, R5, uap->curregs[R5]);
598 pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n",
599 set_bits, clear_bits, uap->curregs[R5]);
600 zssync(uap);
601 }
602
603 /*
604 * Get Modem Control bits (only the input ones, the core will
605 * or that with a cached value of the control ones)
606 * The port lock is held and interrupts are disabled.
607 */
608 static unsigned int pmz_get_mctrl(struct uart_port *port)
609 {
610 struct uart_pmac_port *uap = to_pmz(port);
611 unsigned char status;
612 unsigned int ret;
613
614 if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
615 return 0;
616
617 status = read_zsreg(uap, R0);
618
619 ret = 0;
620 if (status & DCD)
621 ret |= TIOCM_CAR;
622 if (status & SYNC_HUNT)
623 ret |= TIOCM_DSR;
624 if (!(status & CTS))
625 ret |= TIOCM_CTS;
626
627 return ret;
628 }
629
630 /*
631 * Stop TX side. Dealt like sunzilog at next Tx interrupt,
632 * though for DMA, we will have to do a bit more.
633 * The port lock is held and interrupts are disabled.
634 */
635 static void pmz_stop_tx(struct uart_port *port)
636 {
637 to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED;
638 }
639
640 /*
641 * Kick the Tx side.
642 * The port lock is held and interrupts are disabled.
643 */
644 static void pmz_start_tx(struct uart_port *port)
645 {
646 struct uart_pmac_port *uap = to_pmz(port);
647 unsigned char status;
648
649 pmz_debug("pmz: start_tx()\n");
650
651 uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
652 uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
653
654 if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
655 return;
656
657 status = read_zsreg(uap, R0);
658
659 /* TX busy? Just wait for the TX done interrupt. */
660 if (!(status & Tx_BUF_EMP))
661 return;
662
663 /* Send the first character to jump-start the TX done
664 * IRQ sending engine.
665 */
666 if (port->x_char) {
667 write_zsdata(uap, port->x_char);
668 zssync(uap);
669 port->icount.tx++;
670 port->x_char = 0;
671 } else {
672 struct circ_buf *xmit = &port->state->xmit;
673
674 write_zsdata(uap, xmit->buf[xmit->tail]);
675 zssync(uap);
676 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
677 port->icount.tx++;
678
679 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
680 uart_write_wakeup(&uap->port);
681 }
682 pmz_debug("pmz: start_tx() done.\n");
683 }
684
685 /*
686 * Stop Rx side, basically disable emitting of
687 * Rx interrupts on the port. We don't disable the rx
688 * side of the chip proper though
689 * The port lock is held.
690 */
691 static void pmz_stop_rx(struct uart_port *port)
692 {
693 struct uart_pmac_port *uap = to_pmz(port);
694
695 if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
696 return;
697
698 pmz_debug("pmz: stop_rx()()\n");
699
700 /* Disable all RX interrupts. */
701 uap->curregs[R1] &= ~RxINT_MASK;
702 pmz_maybe_update_regs(uap);
703
704 pmz_debug("pmz: stop_rx() done.\n");
705 }
706
707 /*
708 * Enable modem status change interrupts
709 * The port lock is held.
710 */
711 static void pmz_enable_ms(struct uart_port *port)
712 {
713 struct uart_pmac_port *uap = to_pmz(port);
714 unsigned char new_reg;
715
716 if (ZS_IS_IRDA(uap) || uap->node == NULL)
717 return;
718 new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
719 if (new_reg != uap->curregs[R15]) {
720 uap->curregs[R15] = new_reg;
721
722 if (ZS_IS_ASLEEP(uap))
723 return;
724 /* NOTE: Not subject to 'transmitter active' rule. */
725 write_zsreg(uap, R15, uap->curregs[R15]);
726 }
727 }
728
729 /*
730 * Control break state emission
731 * The port lock is not held.
732 */
733 static void pmz_break_ctl(struct uart_port *port, int break_state)
734 {
735 struct uart_pmac_port *uap = to_pmz(port);
736 unsigned char set_bits, clear_bits, new_reg;
737 unsigned long flags;
738
739 if (uap->node == NULL)
740 return;
741 set_bits = clear_bits = 0;
742
743 if (break_state)
744 set_bits |= SND_BRK;
745 else
746 clear_bits |= SND_BRK;
747
748 spin_lock_irqsave(&port->lock, flags);
749
750 new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits;
751 if (new_reg != uap->curregs[R5]) {
752 uap->curregs[R5] = new_reg;
753
754 /* NOTE: Not subject to 'transmitter active' rule. */
755 if (ZS_IS_ASLEEP(uap)) {
756 spin_unlock_irqrestore(&port->lock, flags);
757 return;
758 }
759 write_zsreg(uap, R5, uap->curregs[R5]);
760 }
761
762 spin_unlock_irqrestore(&port->lock, flags);
763 }
764
765 #ifdef CONFIG_PPC_PMAC
766
767 /*
768 * Turn power on or off to the SCC and associated stuff
769 * (port drivers, modem, IR port, etc.)
770 * Returns the number of milliseconds we should wait before
771 * trying to use the port.
772 */
773 static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
774 {
775 int delay = 0;
776 int rc;
777
778 if (state) {
779 rc = pmac_call_feature(
780 PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1);
781 pmz_debug("port power on result: %d\n", rc);
782 if (ZS_IS_INTMODEM(uap)) {
783 rc = pmac_call_feature(
784 PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1);
785 delay = 2500; /* wait for 2.5s before using */
786 pmz_debug("modem power result: %d\n", rc);
787 }
788 } else {
789 /* TODO: Make that depend on a timer, don't power down
790 * immediately
791 */
792 if (ZS_IS_INTMODEM(uap)) {
793 rc = pmac_call_feature(
794 PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0);
795 pmz_debug("port power off result: %d\n", rc);
796 }
797 pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0);
798 }
799 return delay;
800 }
801
802 #else
803
804 static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
805 {
806 return 0;
807 }
808
809 #endif /* !CONFIG_PPC_PMAC */
810
811 /*
812 * FixZeroBug....Works around a bug in the SCC receving channel.
813 * Inspired from Darwin code, 15 Sept. 2000 -DanM
814 *
815 * The following sequence prevents a problem that is seen with O'Hare ASICs
816 * (most versions -- also with some Heathrow and Hydra ASICs) where a zero
817 * at the input to the receiver becomes 'stuck' and locks up the receiver.
818 * This problem can occur as a result of a zero bit at the receiver input
819 * coincident with any of the following events:
820 *
821 * The SCC is initialized (hardware or software).
822 * A framing error is detected.
823 * The clocking option changes from synchronous or X1 asynchronous
824 * clocking to X16, X32, or X64 asynchronous clocking.
825 * The decoding mode is changed among NRZ, NRZI, FM0, or FM1.
826 *
827 * This workaround attempts to recover from the lockup condition by placing
828 * the SCC in synchronous loopback mode with a fast clock before programming
829 * any of the asynchronous modes.
830 */
831 static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap)
832 {
833 write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB);
834 zssync(uap);
835 udelay(10);
836 write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV);
837 zssync(uap);
838
839 write_zsreg(uap, 4, X1CLK | MONSYNC);
840 write_zsreg(uap, 3, Rx8);
841 write_zsreg(uap, 5, Tx8 | RTS);
842 write_zsreg(uap, 9, NV); /* Didn't we already do this? */
843 write_zsreg(uap, 11, RCBR | TCBR);
844 write_zsreg(uap, 12, 0);
845 write_zsreg(uap, 13, 0);
846 write_zsreg(uap, 14, (LOOPBAK | BRSRC));
847 write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB));
848 write_zsreg(uap, 3, Rx8 | RxENABLE);
849 write_zsreg(uap, 0, RES_EXT_INT);
850 write_zsreg(uap, 0, RES_EXT_INT);
851 write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */
852
853 /* The channel should be OK now, but it is probably receiving
854 * loopback garbage.
855 * Switch to asynchronous mode, disable the receiver,
856 * and discard everything in the receive buffer.
857 */
858 write_zsreg(uap, 9, NV);
859 write_zsreg(uap, 4, X16CLK | SB_MASK);
860 write_zsreg(uap, 3, Rx8);
861
862 while (read_zsreg(uap, 0) & Rx_CH_AV) {
863 (void)read_zsreg(uap, 8);
864 write_zsreg(uap, 0, RES_EXT_INT);
865 write_zsreg(uap, 0, ERR_RES);
866 }
867 }
868
869 /*
870 * Real startup routine, powers up the hardware and sets up
871 * the SCC. Returns a delay in ms where you need to wait before
872 * actually using the port, this is typically the internal modem
873 * powerup delay. This routine expect the lock to be taken.
874 */
875 static int __pmz_startup(struct uart_pmac_port *uap)
876 {
877 int pwr_delay = 0;
878
879 memset(&uap->curregs, 0, sizeof(uap->curregs));
880
881 /* Power up the SCC & underlying hardware (modem/irda) */
882 pwr_delay = pmz_set_scc_power(uap, 1);
883
884 /* Nice buggy HW ... */
885 pmz_fix_zero_bug_scc(uap);
886
887 /* Reset the channel */
888 uap->curregs[R9] = 0;
889 write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB);
890 zssync(uap);
891 udelay(10);
892 write_zsreg(uap, 9, 0);
893 zssync(uap);
894
895 /* Clear the interrupt registers */
896 write_zsreg(uap, R1, 0);
897 write_zsreg(uap, R0, ERR_RES);
898 write_zsreg(uap, R0, ERR_RES);
899 write_zsreg(uap, R0, RES_H_IUS);
900 write_zsreg(uap, R0, RES_H_IUS);
901
902 /* Setup some valid baud rate */
903 uap->curregs[R4] = X16CLK | SB1;
904 uap->curregs[R3] = Rx8;
905 uap->curregs[R5] = Tx8 | RTS;
906 if (!ZS_IS_IRDA(uap))
907 uap->curregs[R5] |= DTR;
908 uap->curregs[R12] = 0;
909 uap->curregs[R13] = 0;
910 uap->curregs[R14] = BRENAB;
911
912 /* Clear handshaking, enable BREAK interrupts */
913 uap->curregs[R15] = BRKIE;
914
915 /* Master interrupt enable */
916 uap->curregs[R9] |= NV | MIE;
917
918 pmz_load_zsregs(uap, uap->curregs);
919
920 /* Enable receiver and transmitter. */
921 write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE);
922 write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE);
923
924 /* Remember status for DCD/CTS changes */
925 uap->prev_status = read_zsreg(uap, R0);
926
927 return pwr_delay;
928 }
929
930 static void pmz_irda_reset(struct uart_pmac_port *uap)
931 {
932 uap->curregs[R5] |= DTR;
933 write_zsreg(uap, R5, uap->curregs[R5]);
934 zssync(uap);
935 mdelay(110);
936 uap->curregs[R5] &= ~DTR;
937 write_zsreg(uap, R5, uap->curregs[R5]);
938 zssync(uap);
939 mdelay(10);
940 }
941
942 /*
943 * This is the "normal" startup routine, using the above one
944 * wrapped with the lock and doing a schedule delay
945 */
946 static int pmz_startup(struct uart_port *port)
947 {
948 struct uart_pmac_port *uap = to_pmz(port);
949 unsigned long flags;
950 int pwr_delay = 0;
951
952 pmz_debug("pmz: startup()\n");
953
954 if (ZS_IS_ASLEEP(uap))
955 return -EAGAIN;
956 if (uap->node == NULL)
957 return -ENODEV;
958
959 mutex_lock(&pmz_irq_mutex);
960
961 uap->flags |= PMACZILOG_FLAG_IS_OPEN;
962
963 /* A console is never powered down. Else, power up and
964 * initialize the chip
965 */
966 if (!ZS_IS_CONS(uap)) {
967 spin_lock_irqsave(&port->lock, flags);
968 pwr_delay = __pmz_startup(uap);
969 spin_unlock_irqrestore(&port->lock, flags);
970 }
971
972 pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
973 if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
974 "SCC", uap)) {
975 pmz_error("Unable to register zs interrupt handler.\n");
976 pmz_set_scc_power(uap, 0);
977 mutex_unlock(&pmz_irq_mutex);
978 return -ENXIO;
979 }
980
981 mutex_unlock(&pmz_irq_mutex);
982
983 /* Right now, we deal with delay by blocking here, I'll be
984 * smarter later on
985 */
986 if (pwr_delay != 0) {
987 pmz_debug("pmz: delaying %d ms\n", pwr_delay);
988 msleep(pwr_delay);
989 }
990
991 /* IrDA reset is done now */
992 if (ZS_IS_IRDA(uap))
993 pmz_irda_reset(uap);
994
995 /* Enable interrupts emission from the chip */
996 spin_lock_irqsave(&port->lock, flags);
997 uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
998 if (!ZS_IS_EXTCLK(uap))
999 uap->curregs[R1] |= EXT_INT_ENAB;
1000 write_zsreg(uap, R1, uap->curregs[R1]);
1001 spin_unlock_irqrestore(&port->lock, flags);
1002
1003 pmz_debug("pmz: startup() done.\n");
1004
1005 return 0;
1006 }
1007
1008 static void pmz_shutdown(struct uart_port *port)
1009 {
1010 struct uart_pmac_port *uap = to_pmz(port);
1011 unsigned long flags;
1012
1013 pmz_debug("pmz: shutdown()\n");
1014
1015 if (uap->node == NULL)
1016 return;
1017
1018 mutex_lock(&pmz_irq_mutex);
1019
1020 /* Release interrupt handler */
1021 free_irq(uap->port.irq, uap);
1022
1023 spin_lock_irqsave(&port->lock, flags);
1024
1025 uap->flags &= ~PMACZILOG_FLAG_IS_OPEN;
1026
1027 if (!ZS_IS_OPEN(uap->mate))
1028 pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
1029
1030 /* Disable interrupts */
1031 if (!ZS_IS_ASLEEP(uap)) {
1032 uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
1033 write_zsreg(uap, R1, uap->curregs[R1]);
1034 zssync(uap);
1035 }
1036
1037 if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) {
1038 spin_unlock_irqrestore(&port->lock, flags);
1039 mutex_unlock(&pmz_irq_mutex);
1040 return;
1041 }
1042
1043 /* Disable receiver and transmitter. */
1044 uap->curregs[R3] &= ~RxENABLE;
1045 uap->curregs[R5] &= ~TxENABLE;
1046
1047 /* Disable all interrupts and BRK assertion. */
1048 uap->curregs[R5] &= ~SND_BRK;
1049 pmz_maybe_update_regs(uap);
1050
1051 /* Shut the chip down */
1052 pmz_set_scc_power(uap, 0);
1053
1054 spin_unlock_irqrestore(&port->lock, flags);
1055
1056 mutex_unlock(&pmz_irq_mutex);
1057
1058 pmz_debug("pmz: shutdown() done.\n");
1059 }
1060
1061 /* Shared by TTY driver and serial console setup. The port lock is held
1062 * and local interrupts are disabled.
1063 */
1064 static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
1065 unsigned int iflag, unsigned long baud)
1066 {
1067 int brg;
1068
1069 /* Switch to external clocking for IrDA high clock rates. That
1070 * code could be re-used for Midi interfaces with different
1071 * multipliers
1072 */
1073 if (baud >= 115200 && ZS_IS_IRDA(uap)) {
1074 uap->curregs[R4] = X1CLK;
1075 uap->curregs[R11] = RCTRxCP | TCTRxCP;
1076 uap->curregs[R14] = 0; /* BRG off */
1077 uap->curregs[R12] = 0;
1078 uap->curregs[R13] = 0;
1079 uap->flags |= PMACZILOG_FLAG_IS_EXTCLK;
1080 } else {
1081 switch (baud) {
1082 case ZS_CLOCK/16: /* 230400 */
1083 uap->curregs[R4] = X16CLK;
1084 uap->curregs[R11] = 0;
1085 uap->curregs[R14] = 0;
1086 break;
1087 case ZS_CLOCK/32: /* 115200 */
1088 uap->curregs[R4] = X32CLK;
1089 uap->curregs[R11] = 0;
1090 uap->curregs[R14] = 0;
1091 break;
1092 default:
1093 uap->curregs[R4] = X16CLK;
1094 uap->curregs[R11] = TCBR | RCBR;
1095 brg = BPS_TO_BRG(baud, ZS_CLOCK / 16);
1096 uap->curregs[R12] = (brg & 255);
1097 uap->curregs[R13] = ((brg >> 8) & 255);
1098 uap->curregs[R14] = BRENAB;
1099 }
1100 uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK;
1101 }
1102
1103 /* Character size, stop bits, and parity. */
1104 uap->curregs[3] &= ~RxN_MASK;
1105 uap->curregs[5] &= ~TxN_MASK;
1106
1107 switch (cflag & CSIZE) {
1108 case CS5:
1109 uap->curregs[3] |= Rx5;
1110 uap->curregs[5] |= Tx5;
1111 uap->parity_mask = 0x1f;
1112 break;
1113 case CS6:
1114 uap->curregs[3] |= Rx6;
1115 uap->curregs[5] |= Tx6;
1116 uap->parity_mask = 0x3f;
1117 break;
1118 case CS7:
1119 uap->curregs[3] |= Rx7;
1120 uap->curregs[5] |= Tx7;
1121 uap->parity_mask = 0x7f;
1122 break;
1123 case CS8:
1124 default:
1125 uap->curregs[3] |= Rx8;
1126 uap->curregs[5] |= Tx8;
1127 uap->parity_mask = 0xff;
1128 break;
1129 };
1130 uap->curregs[4] &= ~(SB_MASK);
1131 if (cflag & CSTOPB)
1132 uap->curregs[4] |= SB2;
1133 else
1134 uap->curregs[4] |= SB1;
1135 if (cflag & PARENB)
1136 uap->curregs[4] |= PAR_ENAB;
1137 else
1138 uap->curregs[4] &= ~PAR_ENAB;
1139 if (!(cflag & PARODD))
1140 uap->curregs[4] |= PAR_EVEN;
1141 else
1142 uap->curregs[4] &= ~PAR_EVEN;
1143
1144 uap->port.read_status_mask = Rx_OVR;
1145 if (iflag & INPCK)
1146 uap->port.read_status_mask |= CRC_ERR | PAR_ERR;
1147 if (iflag & (BRKINT | PARMRK))
1148 uap->port.read_status_mask |= BRK_ABRT;
1149
1150 uap->port.ignore_status_mask = 0;
1151 if (iflag & IGNPAR)
1152 uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
1153 if (iflag & IGNBRK) {
1154 uap->port.ignore_status_mask |= BRK_ABRT;
1155 if (iflag & IGNPAR)
1156 uap->port.ignore_status_mask |= Rx_OVR;
1157 }
1158
1159 if ((cflag & CREAD) == 0)
1160 uap->port.ignore_status_mask = 0xff;
1161 }
1162
1163
1164 /*
1165 * Set the irda codec on the imac to the specified baud rate.
1166 */
1167 static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
1168 {
1169 u8 cmdbyte;
1170 int t, version;
1171
1172 switch (*baud) {
1173 /* SIR modes */
1174 case 2400:
1175 cmdbyte = 0x53;
1176 break;
1177 case 4800:
1178 cmdbyte = 0x52;
1179 break;
1180 case 9600:
1181 cmdbyte = 0x51;
1182 break;
1183 case 19200:
1184 cmdbyte = 0x50;
1185 break;
1186 case 38400:
1187 cmdbyte = 0x4f;
1188 break;
1189 case 57600:
1190 cmdbyte = 0x4e;
1191 break;
1192 case 115200:
1193 cmdbyte = 0x4d;
1194 break;
1195 /* The FIR modes aren't really supported at this point, how
1196 * do we select the speed ? via the FCR on KeyLargo ?
1197 */
1198 case 1152000:
1199 cmdbyte = 0;
1200 break;
1201 case 4000000:
1202 cmdbyte = 0;
1203 break;
1204 default: /* 9600 */
1205 cmdbyte = 0x51;
1206 *baud = 9600;
1207 break;
1208 }
1209
1210 /* Wait for transmitter to drain */
1211 t = 10000;
1212 while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0
1213 || (read_zsreg(uap, R1) & ALL_SNT) == 0) {
1214 if (--t <= 0) {
1215 pmz_error("transmitter didn't drain\n");
1216 return;
1217 }
1218 udelay(10);
1219 }
1220
1221 /* Drain the receiver too */
1222 t = 100;
1223 (void)read_zsdata(uap);
1224 (void)read_zsdata(uap);
1225 (void)read_zsdata(uap);
1226 mdelay(10);
1227 while (read_zsreg(uap, R0) & Rx_CH_AV) {
1228 read_zsdata(uap);
1229 mdelay(10);
1230 if (--t <= 0) {
1231 pmz_error("receiver didn't drain\n");
1232 return;
1233 }
1234 }
1235
1236 /* Switch to command mode */
1237 uap->curregs[R5] |= DTR;
1238 write_zsreg(uap, R5, uap->curregs[R5]);
1239 zssync(uap);
1240 mdelay(1);
1241
1242 /* Switch SCC to 19200 */
1243 pmz_convert_to_zs(uap, CS8, 0, 19200);
1244 pmz_load_zsregs(uap, uap->curregs);
1245 mdelay(1);
1246
1247 /* Write get_version command byte */
1248 write_zsdata(uap, 1);
1249 t = 5000;
1250 while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
1251 if (--t <= 0) {
1252 pmz_error("irda_setup timed out on get_version byte\n");
1253 goto out;
1254 }
1255 udelay(10);
1256 }
1257 version = read_zsdata(uap);
1258
1259 if (version < 4) {
1260 pmz_info("IrDA: dongle version %d not supported\n", version);
1261 goto out;
1262 }
1263
1264 /* Send speed mode */
1265 write_zsdata(uap, cmdbyte);
1266 t = 5000;
1267 while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
1268 if (--t <= 0) {
1269 pmz_error("irda_setup timed out on speed mode byte\n");
1270 goto out;
1271 }
1272 udelay(10);
1273 }
1274 t = read_zsdata(uap);
1275 if (t != cmdbyte)
1276 pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
1277
1278 pmz_info("IrDA setup for %ld bps, dongle version: %d\n",
1279 *baud, version);
1280
1281 (void)read_zsdata(uap);
1282 (void)read_zsdata(uap);
1283 (void)read_zsdata(uap);
1284
1285 out:
1286 /* Switch back to data mode */
1287 uap->curregs[R5] &= ~DTR;
1288 write_zsreg(uap, R5, uap->curregs[R5]);
1289 zssync(uap);
1290
1291 (void)read_zsdata(uap);
1292 (void)read_zsdata(uap);
1293 (void)read_zsdata(uap);
1294 }
1295
1296
1297 static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios,
1298 struct ktermios *old)
1299 {
1300 struct uart_pmac_port *uap = to_pmz(port);
1301 unsigned long baud;
1302
1303 pmz_debug("pmz: set_termios()\n");
1304
1305 if (ZS_IS_ASLEEP(uap))
1306 return;
1307
1308 memcpy(&uap->termios_cache, termios, sizeof(struct ktermios));
1309
1310 /* XXX Check which revs of machines actually allow 1 and 4Mb speeds
1311 * on the IR dongle. Note that the IRTTY driver currently doesn't know
1312 * about the FIR mode and high speed modes. So these are unused. For
1313 * implementing proper support for these, we should probably add some
1314 * DMA as well, at least on the Rx side, which isn't a simple thing
1315 * at this point.
1316 */
1317 if (ZS_IS_IRDA(uap)) {
1318 /* Calc baud rate */
1319 baud = uart_get_baud_rate(port, termios, old, 1200, 4000000);
1320 pmz_debug("pmz: switch IRDA to %ld bauds\n", baud);
1321 /* Cet the irda codec to the right rate */
1322 pmz_irda_setup(uap, &baud);
1323 /* Set final baud rate */
1324 pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
1325 pmz_load_zsregs(uap, uap->curregs);
1326 zssync(uap);
1327 } else {
1328 baud = uart_get_baud_rate(port, termios, old, 1200, 230400);
1329 pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
1330 /* Make sure modem status interrupts are correctly configured */
1331 if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) {
1332 uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE;
1333 uap->flags |= PMACZILOG_FLAG_MODEM_STATUS;
1334 } else {
1335 uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE);
1336 uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS;
1337 }
1338
1339 /* Load registers to the chip */
1340 pmz_maybe_update_regs(uap);
1341 }
1342 uart_update_timeout(port, termios->c_cflag, baud);
1343
1344 pmz_debug("pmz: set_termios() done.\n");
1345 }
1346
1347 /* The port lock is not held. */
1348 static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
1349 struct ktermios *old)
1350 {
1351 struct uart_pmac_port *uap = to_pmz(port);
1352 unsigned long flags;
1353
1354 spin_lock_irqsave(&port->lock, flags);
1355
1356 /* Disable IRQs on the port */
1357 uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
1358 write_zsreg(uap, R1, uap->curregs[R1]);
1359
1360 /* Setup new port configuration */
1361 __pmz_set_termios(port, termios, old);
1362
1363 /* Re-enable IRQs on the port */
1364 if (ZS_IS_OPEN(uap)) {
1365 uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
1366 if (!ZS_IS_EXTCLK(uap))
1367 uap->curregs[R1] |= EXT_INT_ENAB;
1368 write_zsreg(uap, R1, uap->curregs[R1]);
1369 }
1370 spin_unlock_irqrestore(&port->lock, flags);
1371 }
1372
1373 static const char *pmz_type(struct uart_port *port)
1374 {
1375 struct uart_pmac_port *uap = to_pmz(port);
1376
1377 if (ZS_IS_IRDA(uap))
1378 return "Z85c30 ESCC - Infrared port";
1379 else if (ZS_IS_INTMODEM(uap))
1380 return "Z85c30 ESCC - Internal modem";
1381 return "Z85c30 ESCC - Serial port";
1382 }
1383
1384 /* We do not request/release mappings of the registers here, this
1385 * happens at early serial probe time.
1386 */
1387 static void pmz_release_port(struct uart_port *port)
1388 {
1389 }
1390
1391 static int pmz_request_port(struct uart_port *port)
1392 {
1393 return 0;
1394 }
1395
1396 /* These do not need to do anything interesting either. */
1397 static void pmz_config_port(struct uart_port *port, int flags)
1398 {
1399 }
1400
1401 /* We do not support letting the user mess with the divisor, IRQ, etc. */
1402 static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
1403 {
1404 return -EINVAL;
1405 }
1406
1407 #ifdef CONFIG_CONSOLE_POLL
1408
1409 static int pmz_poll_get_char(struct uart_port *port)
1410 {
1411 struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
1412
1413 while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0)
1414 udelay(5);
1415 return read_zsdata(uap);
1416 }
1417
1418 static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
1419 {
1420 struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
1421
1422 /* Wait for the transmit buffer to empty. */
1423 while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
1424 udelay(5);
1425 write_zsdata(uap, c);
1426 }
1427
1428 #endif /* CONFIG_CONSOLE_POLL */
1429
1430 static struct uart_ops pmz_pops = {
1431 .tx_empty = pmz_tx_empty,
1432 .set_mctrl = pmz_set_mctrl,
1433 .get_mctrl = pmz_get_mctrl,
1434 .stop_tx = pmz_stop_tx,
1435 .start_tx = pmz_start_tx,
1436 .stop_rx = pmz_stop_rx,
1437 .enable_ms = pmz_enable_ms,
1438 .break_ctl = pmz_break_ctl,
1439 .startup = pmz_startup,
1440 .shutdown = pmz_shutdown,
1441 .set_termios = pmz_set_termios,
1442 .type = pmz_type,
1443 .release_port = pmz_release_port,
1444 .request_port = pmz_request_port,
1445 .config_port = pmz_config_port,
1446 .verify_port = pmz_verify_port,
1447 #ifdef CONFIG_CONSOLE_POLL
1448 .poll_get_char = pmz_poll_get_char,
1449 .poll_put_char = pmz_poll_put_char,
1450 #endif
1451 };
1452
1453 #ifdef CONFIG_PPC_PMAC
1454
1455 /*
1456 * Setup one port structure after probing, HW is down at this point,
1457 * Unlike sunzilog, we don't need to pre-init the spinlock as we don't
1458 * register our console before uart_add_one_port() is called
1459 */
1460 static int __init pmz_init_port(struct uart_pmac_port *uap)
1461 {
1462 struct device_node *np = uap->node;
1463 const char *conn;
1464 const struct slot_names_prop {
1465 int count;
1466 char name[1];
1467 } *slots;
1468 int len;
1469 struct resource r_ports, r_rxdma, r_txdma;
1470
1471 /*
1472 * Request & map chip registers
1473 */
1474 if (of_address_to_resource(np, 0, &r_ports))
1475 return -ENODEV;
1476 uap->port.mapbase = r_ports.start;
1477 uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
1478
1479 uap->control_reg = uap->port.membase;
1480 uap->data_reg = uap->control_reg + 0x10;
1481
1482 /*
1483 * Request & map DBDMA registers
1484 */
1485 #ifdef HAS_DBDMA
1486 if (of_address_to_resource(np, 1, &r_txdma) == 0 &&
1487 of_address_to_resource(np, 2, &r_rxdma) == 0)
1488 uap->flags |= PMACZILOG_FLAG_HAS_DMA;
1489 #else
1490 memset(&r_txdma, 0, sizeof(struct resource));
1491 memset(&r_rxdma, 0, sizeof(struct resource));
1492 #endif
1493 if (ZS_HAS_DMA(uap)) {
1494 uap->tx_dma_regs = ioremap(r_txdma.start, 0x100);
1495 if (uap->tx_dma_regs == NULL) {
1496 uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
1497 goto no_dma;
1498 }
1499 uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100);
1500 if (uap->rx_dma_regs == NULL) {
1501 iounmap(uap->tx_dma_regs);
1502 uap->tx_dma_regs = NULL;
1503 uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
1504 goto no_dma;
1505 }
1506 uap->tx_dma_irq = irq_of_parse_and_map(np, 1);
1507 uap->rx_dma_irq = irq_of_parse_and_map(np, 2);
1508 }
1509 no_dma:
1510
1511 /*
1512 * Detect port type
1513 */
1514 if (of_device_is_compatible(np, "cobalt"))
1515 uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
1516 conn = of_get_property(np, "AAPL,connector", &len);
1517 if (conn && (strcmp(conn, "infrared") == 0))
1518 uap->flags |= PMACZILOG_FLAG_IS_IRDA;
1519 uap->port_type = PMAC_SCC_ASYNC;
1520 /* 1999 Powerbook G3 has slot-names property instead */
1521 slots = of_get_property(np, "slot-names", &len);
1522 if (slots && slots->count > 0) {
1523 if (strcmp(slots->name, "IrDA") == 0)
1524 uap->flags |= PMACZILOG_FLAG_IS_IRDA;
1525 else if (strcmp(slots->name, "Modem") == 0)
1526 uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
1527 }
1528 if (ZS_IS_IRDA(uap))
1529 uap->port_type = PMAC_SCC_IRDA;
1530 if (ZS_IS_INTMODEM(uap)) {
1531 struct device_node* i2c_modem =
1532 of_find_node_by_name(NULL, "i2c-modem");
1533 if (i2c_modem) {
1534 const char* mid =
1535 of_get_property(i2c_modem, "modem-id", NULL);
1536 if (mid) switch(*mid) {
1537 case 0x04 :
1538 case 0x05 :
1539 case 0x07 :
1540 case 0x08 :
1541 case 0x0b :
1542 case 0x0c :
1543 uap->port_type = PMAC_SCC_I2S1;
1544 }
1545 printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n",
1546 mid ? (*mid) : 0);
1547 of_node_put(i2c_modem);
1548 } else {
1549 printk(KERN_INFO "pmac_zilog: serial modem detected\n");
1550 }
1551 }
1552
1553 /*
1554 * Init remaining bits of "port" structure
1555 */
1556 uap->port.iotype = UPIO_MEM;
1557 uap->port.irq = irq_of_parse_and_map(np, 0);
1558 uap->port.uartclk = ZS_CLOCK;
1559 uap->port.fifosize = 1;
1560 uap->port.ops = &pmz_pops;
1561 uap->port.type = PORT_PMAC_ZILOG;
1562 uap->port.flags = 0;
1563
1564 /*
1565 * Fixup for the port on Gatwick for which the device-tree has
1566 * missing interrupts. Normally, the macio_dev would contain
1567 * fixed up interrupt info, but we use the device-tree directly
1568 * here due to early probing so we need the fixup too.
1569 */
1570 if (uap->port.irq == NO_IRQ &&
1571 np->parent && np->parent->parent &&
1572 of_device_is_compatible(np->parent->parent, "gatwick")) {
1573 /* IRQs on gatwick are offset by 64 */
1574 uap->port.irq = irq_create_mapping(NULL, 64 + 15);
1575 uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4);
1576 uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5);
1577 }
1578
1579 /* Setup some valid baud rate information in the register
1580 * shadows so we don't write crap there before baud rate is
1581 * first initialized.
1582 */
1583 pmz_convert_to_zs(uap, CS8, 0, 9600);
1584
1585 return 0;
1586 }
1587
1588 /*
1589 * Get rid of a port on module removal
1590 */
1591 static void pmz_dispose_port(struct uart_pmac_port *uap)
1592 {
1593 struct device_node *np;
1594
1595 np = uap->node;
1596 iounmap(uap->rx_dma_regs);
1597 iounmap(uap->tx_dma_regs);
1598 iounmap(uap->control_reg);
1599 uap->node = NULL;
1600 of_node_put(np);
1601 memset(uap, 0, sizeof(struct uart_pmac_port));
1602 }
1603
1604 /*
1605 * Called upon match with an escc node in the device-tree.
1606 */
1607 static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
1608 {
1609 int i;
1610
1611 /* Iterate the pmz_ports array to find a matching entry
1612 */
1613 for (i = 0; i < MAX_ZS_PORTS; i++)
1614 if (pmz_ports[i].node == mdev->ofdev.dev.of_node) {
1615 struct uart_pmac_port *uap = &pmz_ports[i];
1616
1617 uap->dev = mdev;
1618 dev_set_drvdata(&mdev->ofdev.dev, uap);
1619 if (macio_request_resources(uap->dev, "pmac_zilog"))
1620 printk(KERN_WARNING "%s: Failed to request resource"
1621 ", port still active\n",
1622 uap->node->name);
1623 else
1624 uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
1625 return 0;
1626 }
1627 return -ENODEV;
1628 }
1629
1630 /*
1631 * That one should not be called, macio isn't really a hotswap device,
1632 * we don't expect one of those serial ports to go away...
1633 */
1634 static int pmz_detach(struct macio_dev *mdev)
1635 {
1636 struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
1637
1638 if (!uap)
1639 return -ENODEV;
1640
1641 if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) {
1642 macio_release_resources(uap->dev);
1643 uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED;
1644 }
1645 dev_set_drvdata(&mdev->ofdev.dev, NULL);
1646 uap->dev = NULL;
1647
1648 return 0;
1649 }
1650
1651
1652 static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
1653 {
1654 struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
1655 struct uart_state *state;
1656 unsigned long flags;
1657
1658 if (uap == NULL) {
1659 printk("HRM... pmz_suspend with NULL uap\n");
1660 return 0;
1661 }
1662
1663 if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
1664 return 0;
1665
1666 pmz_debug("suspend, switching to state %d\n", pm_state.event);
1667
1668 state = pmz_uart_reg.state + uap->port.line;
1669
1670 mutex_lock(&pmz_irq_mutex);
1671 mutex_lock(&state->port.mutex);
1672
1673 spin_lock_irqsave(&uap->port.lock, flags);
1674
1675 if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) {
1676 /* Disable receiver and transmitter. */
1677 uap->curregs[R3] &= ~RxENABLE;
1678 uap->curregs[R5] &= ~TxENABLE;
1679
1680 /* Disable all interrupts and BRK assertion. */
1681 uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
1682 uap->curregs[R5] &= ~SND_BRK;
1683 pmz_load_zsregs(uap, uap->curregs);
1684 uap->flags |= PMACZILOG_FLAG_IS_ASLEEP;
1685 mb();
1686 }
1687
1688 spin_unlock_irqrestore(&uap->port.lock, flags);
1689
1690 if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate))
1691 if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
1692 pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
1693 disable_irq(uap->port.irq);
1694 }
1695
1696 if (ZS_IS_CONS(uap))
1697 uap->port.cons->flags &= ~CON_ENABLED;
1698
1699 /* Shut the chip down */
1700 pmz_set_scc_power(uap, 0);
1701
1702 mutex_unlock(&state->port.mutex);
1703 mutex_unlock(&pmz_irq_mutex);
1704
1705 pmz_debug("suspend, switching complete\n");
1706
1707 mdev->ofdev.dev.power.power_state = pm_state;
1708
1709 return 0;
1710 }
1711
1712
1713 static int pmz_resume(struct macio_dev *mdev)
1714 {
1715 struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
1716 struct uart_state *state;
1717 unsigned long flags;
1718 int pwr_delay = 0;
1719
1720 if (uap == NULL)
1721 return 0;
1722
1723 if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON)
1724 return 0;
1725
1726 pmz_debug("resume, switching to state 0\n");
1727
1728 state = pmz_uart_reg.state + uap->port.line;
1729
1730 mutex_lock(&pmz_irq_mutex);
1731 mutex_lock(&state->port.mutex);
1732
1733 spin_lock_irqsave(&uap->port.lock, flags);
1734 if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
1735 spin_unlock_irqrestore(&uap->port.lock, flags);
1736 goto bail;
1737 }
1738 pwr_delay = __pmz_startup(uap);
1739
1740 /* Take care of config that may have changed while asleep */
1741 __pmz_set_termios(&uap->port, &uap->termios_cache, NULL);
1742
1743 if (ZS_IS_OPEN(uap)) {
1744 /* Enable interrupts */
1745 uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
1746 if (!ZS_IS_EXTCLK(uap))
1747 uap->curregs[R1] |= EXT_INT_ENAB;
1748 write_zsreg(uap, R1, uap->curregs[R1]);
1749 }
1750
1751 spin_unlock_irqrestore(&uap->port.lock, flags);
1752
1753 if (ZS_IS_CONS(uap))
1754 uap->port.cons->flags |= CON_ENABLED;
1755
1756 /* Re-enable IRQ on the controller */
1757 if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
1758 pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
1759 enable_irq(uap->port.irq);
1760 }
1761
1762 bail:
1763 mutex_unlock(&state->port.mutex);
1764 mutex_unlock(&pmz_irq_mutex);
1765
1766 /* Right now, we deal with delay by blocking here, I'll be
1767 * smarter later on
1768 */
1769 if (pwr_delay != 0) {
1770 pmz_debug("pmz: delaying %d ms\n", pwr_delay);
1771 msleep(pwr_delay);
1772 }
1773
1774 pmz_debug("resume, switching complete\n");
1775
1776 mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON;
1777
1778 return 0;
1779 }
1780
1781 /*
1782 * Probe all ports in the system and build the ports array, we register
1783 * with the serial layer at this point, the macio-type probing is only
1784 * used later to "attach" to the sysfs tree so we get power management
1785 * events
1786 */
1787 static int __init pmz_probe(void)
1788 {
1789 struct device_node *node_p, *node_a, *node_b, *np;
1790 int count = 0;
1791 int rc;
1792
1793 /*
1794 * Find all escc chips in the system
1795 */
1796 node_p = of_find_node_by_name(NULL, "escc");
1797 while (node_p) {
1798 /*
1799 * First get channel A/B node pointers
1800 *
1801 * TODO: Add routines with proper locking to do that...
1802 */
1803 node_a = node_b = NULL;
1804 for (np = NULL; (np = of_get_next_child(node_p, np)) != NULL;) {
1805 if (strncmp(np->name, "ch-a", 4) == 0)
1806 node_a = of_node_get(np);
1807 else if (strncmp(np->name, "ch-b", 4) == 0)
1808 node_b = of_node_get(np);
1809 }
1810 if (!node_a && !node_b) {
1811 of_node_put(node_a);
1812 of_node_put(node_b);
1813 printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n",
1814 (!node_a) ? 'a' : 'b', node_p->full_name);
1815 goto next;
1816 }
1817
1818 /*
1819 * Fill basic fields in the port structures
1820 */
1821 pmz_ports[count].mate = &pmz_ports[count+1];
1822 pmz_ports[count+1].mate = &pmz_ports[count];
1823 pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
1824 pmz_ports[count].node = node_a;
1825 pmz_ports[count+1].node = node_b;
1826 pmz_ports[count].port.line = count;
1827 pmz_ports[count+1].port.line = count+1;
1828
1829 /*
1830 * Setup the ports for real
1831 */
1832 rc = pmz_init_port(&pmz_ports[count]);
1833 if (rc == 0 && node_b != NULL)
1834 rc = pmz_init_port(&pmz_ports[count+1]);
1835 if (rc != 0) {
1836 of_node_put(node_a);
1837 of_node_put(node_b);
1838 memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port));
1839 memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port));
1840 goto next;
1841 }
1842 count += 2;
1843 next:
1844 node_p = of_find_node_by_name(node_p, "escc");
1845 }
1846 pmz_ports_count = count;
1847
1848 return 0;
1849 }
1850
1851 #else
1852
1853 extern struct platform_device scc_a_pdev, scc_b_pdev;
1854
1855 static int __init pmz_init_port(struct uart_pmac_port *uap)
1856 {
1857 struct resource *r_ports;
1858 int irq;
1859
1860 r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
1861 irq = platform_get_irq(uap->node, 0);
1862 if (!r_ports || !irq)
1863 return -ENODEV;
1864
1865 uap->port.mapbase = r_ports->start;
1866 uap->port.membase = (unsigned char __iomem *) r_ports->start;
1867 uap->port.iotype = UPIO_MEM;
1868 uap->port.irq = irq;
1869 uap->port.uartclk = ZS_CLOCK;
1870 uap->port.fifosize = 1;
1871 uap->port.ops = &pmz_pops;
1872 uap->port.type = PORT_PMAC_ZILOG;
1873 uap->port.flags = 0;
1874
1875 uap->control_reg = uap->port.membase;
1876 uap->data_reg = uap->control_reg + 4;
1877 uap->port_type = 0;
1878
1879 pmz_convert_to_zs(uap, CS8, 0, 9600);
1880
1881 return 0;
1882 }
1883
1884 static int __init pmz_probe(void)
1885 {
1886 int err;
1887
1888 pmz_ports_count = 0;
1889
1890 pmz_ports[0].mate = &pmz_ports[1];
1891 pmz_ports[0].port.line = 0;
1892 pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
1893 pmz_ports[0].node = &scc_a_pdev;
1894 err = pmz_init_port(&pmz_ports[0]);
1895 if (err)
1896 return err;
1897 pmz_ports_count++;
1898
1899 pmz_ports[1].mate = &pmz_ports[0];
1900 pmz_ports[1].port.line = 1;
1901 pmz_ports[1].flags = 0;
1902 pmz_ports[1].node = &scc_b_pdev;
1903 err = pmz_init_port(&pmz_ports[1]);
1904 if (err)
1905 return err;
1906 pmz_ports_count++;
1907
1908 return 0;
1909 }
1910
1911 static void pmz_dispose_port(struct uart_pmac_port *uap)
1912 {
1913 memset(uap, 0, sizeof(struct uart_pmac_port));
1914 }
1915
1916 static int __init pmz_attach(struct platform_device *pdev)
1917 {
1918 int i;
1919
1920 for (i = 0; i < pmz_ports_count; i++)
1921 if (pmz_ports[i].node == pdev)
1922 return 0;
1923 return -ENODEV;
1924 }
1925
1926 static int __exit pmz_detach(struct platform_device *pdev)
1927 {
1928 return 0;
1929 }
1930
1931 #endif /* !CONFIG_PPC_PMAC */
1932
1933 #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
1934
1935 static void pmz_console_write(struct console *con, const char *s, unsigned int count);
1936 static int __init pmz_console_setup(struct console *co, char *options);
1937
1938 static struct console pmz_console = {
1939 .name = PMACZILOG_NAME,
1940 .write = pmz_console_write,
1941 .device = uart_console_device,
1942 .setup = pmz_console_setup,
1943 .flags = CON_PRINTBUFFER,
1944 .index = -1,
1945 .data = &pmz_uart_reg,
1946 };
1947
1948 #define PMACZILOG_CONSOLE &pmz_console
1949 #else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
1950 #define PMACZILOG_CONSOLE (NULL)
1951 #endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
1952
1953 /*
1954 * Register the driver, console driver and ports with the serial
1955 * core
1956 */
1957 static int __init pmz_register(void)
1958 {
1959 int i, rc;
1960
1961 pmz_uart_reg.nr = pmz_ports_count;
1962 pmz_uart_reg.cons = PMACZILOG_CONSOLE;
1963
1964 /*
1965 * Register this driver with the serial core
1966 */
1967 rc = uart_register_driver(&pmz_uart_reg);
1968 if (rc)
1969 return rc;
1970
1971 /*
1972 * Register each port with the serial core
1973 */
1974 for (i = 0; i < pmz_ports_count; i++) {
1975 struct uart_pmac_port *uport = &pmz_ports[i];
1976 /* NULL node may happen on wallstreet */
1977 if (uport->node != NULL)
1978 rc = uart_add_one_port(&pmz_uart_reg, &uport->port);
1979 if (rc)
1980 goto err_out;
1981 }
1982
1983 return 0;
1984 err_out:
1985 while (i-- > 0) {
1986 struct uart_pmac_port *uport = &pmz_ports[i];
1987 uart_remove_one_port(&pmz_uart_reg, &uport->port);
1988 }
1989 uart_unregister_driver(&pmz_uart_reg);
1990 return rc;
1991 }
1992
1993 #ifdef CONFIG_PPC_PMAC
1994
1995 static struct of_device_id pmz_match[] =
1996 {
1997 {
1998 .name = "ch-a",
1999 },
2000 {
2001 .name = "ch-b",
2002 },
2003 {},
2004 };
2005 MODULE_DEVICE_TABLE (of, pmz_match);
2006
2007 static struct macio_driver pmz_driver = {
2008 .driver = {
2009 .name = "pmac_zilog",
2010 .owner = THIS_MODULE,
2011 .of_match_table = pmz_match,
2012 },
2013 .probe = pmz_attach,
2014 .remove = pmz_detach,
2015 .suspend = pmz_suspend,
2016 .resume = pmz_resume,
2017 };
2018
2019 #else
2020
2021 static struct platform_driver pmz_driver = {
2022 .remove = __exit_p(pmz_detach),
2023 .driver = {
2024 .name = "scc",
2025 .owner = THIS_MODULE,
2026 },
2027 };
2028
2029 #endif /* !CONFIG_PPC_PMAC */
2030
2031 static int __init init_pmz(void)
2032 {
2033 int rc, i;
2034 printk(KERN_INFO "%s\n", version);
2035
2036 /*
2037 * First, we need to do a direct OF-based probe pass. We
2038 * do that because we want serial console up before the
2039 * macio stuffs calls us back, and since that makes it
2040 * easier to pass the proper number of channels to
2041 * uart_register_driver()
2042 */
2043 if (pmz_ports_count == 0)
2044 pmz_probe();
2045
2046 /*
2047 * Bail early if no port found
2048 */
2049 if (pmz_ports_count == 0)
2050 return -ENODEV;
2051
2052 /*
2053 * Now we register with the serial layer
2054 */
2055 rc = pmz_register();
2056 if (rc) {
2057 printk(KERN_ERR
2058 "pmac_zilog: Error registering serial device, disabling pmac_zilog.\n"
2059 "pmac_zilog: Did another serial driver already claim the minors?\n");
2060 /* effectively "pmz_unprobe()" */
2061 for (i=0; i < pmz_ports_count; i++)
2062 pmz_dispose_port(&pmz_ports[i]);
2063 return rc;
2064 }
2065
2066 /*
2067 * Then we register the macio driver itself
2068 */
2069 #ifdef CONFIG_PPC_PMAC
2070 return macio_register_driver(&pmz_driver);
2071 #else
2072 return platform_driver_probe(&pmz_driver, pmz_attach);
2073 #endif
2074 }
2075
2076 static void __exit exit_pmz(void)
2077 {
2078 int i;
2079
2080 #ifdef CONFIG_PPC_PMAC
2081 /* Get rid of macio-driver (detach from macio) */
2082 macio_unregister_driver(&pmz_driver);
2083 #else
2084 platform_driver_unregister(&pmz_driver);
2085 #endif
2086
2087 for (i = 0; i < pmz_ports_count; i++) {
2088 struct uart_pmac_port *uport = &pmz_ports[i];
2089 if (uport->node != NULL) {
2090 uart_remove_one_port(&pmz_uart_reg, &uport->port);
2091 pmz_dispose_port(uport);
2092 }
2093 }
2094 /* Unregister UART driver */
2095 uart_unregister_driver(&pmz_uart_reg);
2096 }
2097
2098 #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
2099
2100 static void pmz_console_putchar(struct uart_port *port, int ch)
2101 {
2102 struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
2103
2104 /* Wait for the transmit buffer to empty. */
2105 while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
2106 udelay(5);
2107 write_zsdata(uap, ch);
2108 }
2109
2110 /*
2111 * Print a string to the serial port trying not to disturb
2112 * any possible real use of the port...
2113 */
2114 static void pmz_console_write(struct console *con, const char *s, unsigned int count)
2115 {
2116 struct uart_pmac_port *uap = &pmz_ports[con->index];
2117 unsigned long flags;
2118
2119 if (ZS_IS_ASLEEP(uap))
2120 return;
2121 spin_lock_irqsave(&uap->port.lock, flags);
2122
2123 /* Turn of interrupts and enable the transmitter. */
2124 write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB);
2125 write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR);
2126
2127 uart_console_write(&uap->port, s, count, pmz_console_putchar);
2128
2129 /* Restore the values in the registers. */
2130 write_zsreg(uap, R1, uap->curregs[1]);
2131 /* Don't disable the transmitter. */
2132
2133 spin_unlock_irqrestore(&uap->port.lock, flags);
2134 }
2135
2136 /*
2137 * Setup the serial console
2138 */
2139 static int __init pmz_console_setup(struct console *co, char *options)
2140 {
2141 struct uart_pmac_port *uap;
2142 struct uart_port *port;
2143 int baud = 38400;
2144 int bits = 8;
2145 int parity = 'n';
2146 int flow = 'n';
2147 unsigned long pwr_delay;
2148
2149 /*
2150 * XServe's default to 57600 bps
2151 */
2152 if (of_machine_is_compatible("RackMac1,1")
2153 || of_machine_is_compatible("RackMac1,2")
2154 || of_machine_is_compatible("MacRISC4"))
2155 baud = 57600;
2156
2157 /*
2158 * Check whether an invalid uart number has been specified, and
2159 * if so, search for the first available port that does have
2160 * console support.
2161 */
2162 if (co->index >= pmz_ports_count)
2163 co->index = 0;
2164 uap = &pmz_ports[co->index];
2165 if (uap->node == NULL)
2166 return -ENODEV;
2167 port = &uap->port;
2168
2169 /*
2170 * Mark port as beeing a console
2171 */
2172 uap->flags |= PMACZILOG_FLAG_IS_CONS;
2173
2174 /*
2175 * Temporary fix for uart layer who didn't setup the spinlock yet
2176 */
2177 spin_lock_init(&port->lock);
2178
2179 /*
2180 * Enable the hardware
2181 */
2182 pwr_delay = __pmz_startup(uap);
2183 if (pwr_delay)
2184 mdelay(pwr_delay);
2185
2186 if (options)
2187 uart_parse_options(options, &baud, &parity, &bits, &flow);
2188
2189 return uart_set_options(port, co, baud, parity, bits, flow);
2190 }
2191
2192 static int __init pmz_console_init(void)
2193 {
2194 /* Probe ports */
2195 pmz_probe();
2196
2197 /* TODO: Autoprobe console based on OF */
2198 /* pmz_console.index = i; */
2199 register_console(&pmz_console);
2200
2201 return 0;
2202
2203 }
2204 console_initcall(pmz_console_init);
2205 #endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
2206
2207 module_init(init_pmz);
2208 module_exit(exit_pmz);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree