iwlwifi: remove apm_ops.stop
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / iwlwifi / iwl-1000.c
blobdb540910b1104d42b5d20d15e542c3fc5da7649c
1 /******************************************************************************
3 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/delay.h>
33 #include <linux/skbuff.h>
34 #include <linux/netdevice.h>
35 #include <linux/wireless.h>
36 #include <net/mac80211.h>
37 #include <linux/etherdevice.h>
38 #include <asm/unaligned.h>
40 #include "iwl-eeprom.h"
41 #include "iwl-dev.h"
42 #include "iwl-core.h"
43 #include "iwl-io.h"
44 #include "iwl-sta.h"
45 #include "iwl-agn.h"
46 #include "iwl-helpers.h"
47 #include "iwl-agn-hw.h"
48 #include "iwl-agn-led.h"
49 #include "iwl-agn-debugfs.h"
51 /* Highest firmware API version supported */
52 #define IWL1000_UCODE_API_MAX 3
53 #define IWL100_UCODE_API_MAX 5
55 /* Lowest firmware API version supported */
56 #define IWL1000_UCODE_API_MIN 1
57 #define IWL100_UCODE_API_MIN 5
59 #define IWL1000_FW_PRE "iwlwifi-1000-"
60 #define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
61 #define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api)
63 #define IWL100_FW_PRE "iwlwifi-100-"
64 #define _IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE #api ".ucode"
65 #define IWL100_MODULE_FIRMWARE(api) _IWL100_MODULE_FIRMWARE(api)
69 * For 1000, use advance thermal throttling critical temperature threshold,
70 * but legacy thermal management implementation for now.
71 * This is for the reason of 1000 uCode using advance thermal throttling API
72 * but not implement ct_kill_exit based on ct_kill exit temperature
73 * so the thermal throttling will still based on legacy thermal throttling
74 * management.
75 * The code here need to be modified once 1000 uCode has the advanced thermal
76 * throttling algorithm in place
78 static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
80 /* want Celsius */
81 priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
82 priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
85 /* NIC configuration for 1000 series */
86 static void iwl1000_nic_config(struct iwl_priv *priv)
88 /* set CSR_HW_CONFIG_REG for uCode use */
89 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
90 CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
91 CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
93 /* Setting digital SVR for 1000 card to 1.32V */
94 /* locking is acquired in iwl_set_bits_mask_prph() function */
95 iwl_set_bits_mask_prph(priv, APMG_DIGITAL_SVR_REG,
96 APMG_SVR_DIGITAL_VOLTAGE_1_32,
97 ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
100 static struct iwl_sensitivity_ranges iwl1000_sensitivity = {
101 .min_nrg_cck = 95,
102 .max_nrg_cck = 0, /* not used, set to 0 */
103 .auto_corr_min_ofdm = 90,
104 .auto_corr_min_ofdm_mrc = 170,
105 .auto_corr_min_ofdm_x1 = 120,
106 .auto_corr_min_ofdm_mrc_x1 = 240,
108 .auto_corr_max_ofdm = 120,
109 .auto_corr_max_ofdm_mrc = 210,
110 .auto_corr_max_ofdm_x1 = 155,
111 .auto_corr_max_ofdm_mrc_x1 = 290,
113 .auto_corr_min_cck = 125,
114 .auto_corr_max_cck = 200,
115 .auto_corr_min_cck_mrc = 170,
116 .auto_corr_max_cck_mrc = 400,
117 .nrg_th_cck = 95,
118 .nrg_th_ofdm = 95,
120 .barker_corr_th_min = 190,
121 .barker_corr_th_min_mrc = 390,
122 .nrg_th_cca = 62,
125 static int iwl1000_hw_set_hw_params(struct iwl_priv *priv)
127 if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
128 priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
129 priv->cfg->base_params->num_of_queues =
130 priv->cfg->mod_params->num_of_queues;
132 priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
133 priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
134 priv->hw_params.scd_bc_tbls_size =
135 priv->cfg->base_params->num_of_queues *
136 sizeof(struct iwlagn_scd_bc_tbl);
137 priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
138 priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
139 priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
141 priv->hw_params.max_data_size = IWLAGN_RTC_DATA_SIZE;
142 priv->hw_params.max_inst_size = IWLAGN_RTC_INST_SIZE;
144 priv->hw_params.max_bsm_size = 0;
145 priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
146 BIT(IEEE80211_BAND_5GHZ);
147 priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
149 priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
150 priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
151 priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
152 priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
154 iwl1000_set_ct_threshold(priv);
156 /* Set initial sensitivity parameters */
157 /* Set initial calibration set */
158 priv->hw_params.sens = &iwl1000_sensitivity;
159 priv->hw_params.calib_init_cfg =
160 BIT(IWL_CALIB_XTAL) |
161 BIT(IWL_CALIB_LO) |
162 BIT(IWL_CALIB_TX_IQ) |
163 BIT(IWL_CALIB_TX_IQ_PERD) |
164 BIT(IWL_CALIB_BASE_BAND);
165 if (priv->cfg->need_dc_calib)
166 priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_DC);
168 priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
170 return 0;
173 static struct iwl_lib_ops iwl1000_lib = {
174 .set_hw_params = iwl1000_hw_set_hw_params,
175 .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
176 .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
177 .txq_set_sched = iwlagn_txq_set_sched,
178 .txq_agg_enable = iwlagn_txq_agg_enable,
179 .txq_agg_disable = iwlagn_txq_agg_disable,
180 .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
181 .txq_free_tfd = iwl_hw_txq_free_tfd,
182 .txq_init = iwl_hw_tx_queue_init,
183 .rx_handler_setup = iwlagn_rx_handler_setup,
184 .setup_deferred_work = iwlagn_setup_deferred_work,
185 .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
186 .load_ucode = iwlagn_load_ucode,
187 .dump_nic_event_log = iwl_dump_nic_event_log,
188 .dump_nic_error_log = iwl_dump_nic_error_log,
189 .dump_csr = iwl_dump_csr,
190 .dump_fh = iwl_dump_fh,
191 .init_alive_start = iwlagn_init_alive_start,
192 .alive_notify = iwlagn_alive_notify,
193 .send_tx_power = iwlagn_send_tx_power,
194 .update_chain_flags = iwl_update_chain_flags,
195 .apm_ops = {
196 .init = iwl_apm_init,
197 .config = iwl1000_nic_config,
199 .eeprom_ops = {
200 .regulatory_bands = {
201 EEPROM_REG_BAND_1_CHANNELS,
202 EEPROM_REG_BAND_2_CHANNELS,
203 EEPROM_REG_BAND_3_CHANNELS,
204 EEPROM_REG_BAND_4_CHANNELS,
205 EEPROM_REG_BAND_5_CHANNELS,
206 EEPROM_REG_BAND_24_HT40_CHANNELS,
207 EEPROM_REG_BAND_52_HT40_CHANNELS
209 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
210 .release_semaphore = iwlcore_eeprom_release_semaphore,
211 .calib_version = iwlagn_eeprom_calib_version,
212 .query_addr = iwlagn_eeprom_query_addr,
214 .post_associate = iwl_post_associate,
215 .isr = iwl_isr_ict,
216 .config_ap = iwl_config_ap,
217 .temp_ops = {
218 .temperature = iwlagn_temperature,
220 .manage_ibss_station = iwlagn_manage_ibss_station,
221 .update_bcast_stations = iwl_update_bcast_stations,
222 .debugfs_ops = {
223 .rx_stats_read = iwl_ucode_rx_stats_read,
224 .tx_stats_read = iwl_ucode_tx_stats_read,
225 .general_stats_read = iwl_ucode_general_stats_read,
226 .bt_stats_read = iwl_ucode_bt_stats_read,
227 .reply_tx_error = iwl_reply_tx_error_read,
229 .recover_from_tx_stall = iwl_bg_monitor_recover,
230 .check_plcp_health = iwl_good_plcp_health,
231 .check_ack_health = iwl_good_ack_health,
232 .txfifo_flush = iwlagn_txfifo_flush,
233 .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
234 .tt_ops = {
235 .lower_power_detection = iwl_tt_is_low_power_state,
236 .tt_power_mode = iwl_tt_current_power_mode,
237 .ct_kill_check = iwl_check_for_ct_kill,
241 static const struct iwl_ops iwl1000_ops = {
242 .lib = &iwl1000_lib,
243 .hcmd = &iwlagn_hcmd,
244 .utils = &iwlagn_hcmd_utils,
245 .led = &iwlagn_led_ops,
248 static struct iwl_base_params iwl1000_base_params = {
249 .num_of_queues = IWLAGN_NUM_QUEUES,
250 .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
251 .eeprom_size = OTP_LOW_IMAGE_SIZE,
252 .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
253 .set_l0s = true,
254 .use_bsm = false,
255 .max_ll_items = OTP_MAX_LL_ITEMS_1000,
256 .shadow_ram_support = false,
257 .led_compensation = 51,
258 .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
259 .support_ct_kill_exit = true,
260 .plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
261 .chain_noise_scale = 1000,
262 .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
263 .max_event_log_size = 128,
264 .ucode_tracing = true,
265 .sensitivity_calib_by_driver = true,
266 .chain_noise_calib_by_driver = true,
268 static struct iwl_ht_params iwl1000_ht_params = {
269 .ht_greenfield_support = true,
270 .use_rts_for_aggregation = true, /* use rts/cts protection */
273 struct iwl_cfg iwl1000_bgn_cfg = {
274 .name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
275 .fw_name_pre = IWL1000_FW_PRE,
276 .ucode_api_max = IWL1000_UCODE_API_MAX,
277 .ucode_api_min = IWL1000_UCODE_API_MIN,
278 .sku = IWL_SKU_G|IWL_SKU_N,
279 .valid_tx_ant = ANT_A,
280 .valid_rx_ant = ANT_AB,
281 .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
282 .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
283 .ops = &iwl1000_ops,
284 .mod_params = &iwlagn_mod_params,
285 .base_params = &iwl1000_base_params,
286 .ht_params = &iwl1000_ht_params,
289 struct iwl_cfg iwl1000_bg_cfg = {
290 .name = "Intel(R) Centrino(R) Wireless-N 1000 BG",
291 .fw_name_pre = IWL1000_FW_PRE,
292 .ucode_api_max = IWL1000_UCODE_API_MAX,
293 .ucode_api_min = IWL1000_UCODE_API_MIN,
294 .sku = IWL_SKU_G,
295 .valid_tx_ant = ANT_A,
296 .valid_rx_ant = ANT_AB,
297 .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
298 .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
299 .ops = &iwl1000_ops,
300 .mod_params = &iwlagn_mod_params,
301 .base_params = &iwl1000_base_params,
304 struct iwl_cfg iwl100_bgn_cfg = {
305 .name = "Intel(R) 100 Series 1x1 BGN",
306 .fw_name_pre = IWL100_FW_PRE,
307 .ucode_api_max = IWL100_UCODE_API_MAX,
308 .ucode_api_min = IWL100_UCODE_API_MIN,
309 .sku = IWL_SKU_G|IWL_SKU_N,
310 .valid_tx_ant = ANT_A,
311 .valid_rx_ant = ANT_A,
312 .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
313 .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
314 .ops = &iwl1000_ops,
315 .mod_params = &iwlagn_mod_params,
316 .base_params = &iwl1000_base_params,
317 .ht_params = &iwl1000_ht_params,
320 struct iwl_cfg iwl100_bg_cfg = {
321 .name = "Intel(R) 100 Series 1x1 BG",
322 .fw_name_pre = IWL100_FW_PRE,
323 .ucode_api_max = IWL100_UCODE_API_MAX,
324 .ucode_api_min = IWL100_UCODE_API_MIN,
325 .sku = IWL_SKU_G,
326 .valid_tx_ant = ANT_A,
327 .valid_rx_ant = ANT_A,
328 .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
329 .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
330 .ops = &iwl1000_ops,
331 .mod_params = &iwlagn_mod_params,
332 .base_params = &iwl1000_base_params,
335 MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
336 MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_MAX));