net/igb/e1000/e1000e: more robust ethtool duplex/speed configuration
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / igb / igb_main.c
blobce7838e55827b2e639f999d0b974b074bdaff7cb
1 /*******************************************************************************
3 Intel(R) Gigabit Ethernet Linux driver
4 Copyright(c) 2007-2009 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 more details.
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
22 Contact Information:
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 *******************************************************************************/
28 #include <linux/module.h>
29 #include <linux/types.h>
30 #include <linux/init.h>
31 #include <linux/vmalloc.h>
32 #include <linux/pagemap.h>
33 #include <linux/netdevice.h>
34 #include <linux/ipv6.h>
35 #include <linux/slab.h>
36 #include <net/checksum.h>
37 #include <net/ip6_checksum.h>
38 #include <linux/net_tstamp.h>
39 #include <linux/mii.h>
40 #include <linux/ethtool.h>
41 #include <linux/if_vlan.h>
42 #include <linux/pci.h>
43 #include <linux/pci-aspm.h>
44 #include <linux/delay.h>
45 #include <linux/interrupt.h>
46 #include <linux/if_ether.h>
47 #include <linux/aer.h>
48 #ifdef CONFIG_IGB_DCA
49 #include <linux/dca.h>
50 #endif
51 #include "igb.h"
53 #define MAJ 3
54 #define MIN 0
55 #define BUILD 6
56 #define KFIX 2
57 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
58 __stringify(BUILD) "-k" __stringify(KFIX)
59 char igb_driver_name[] = "igb";
60 char igb_driver_version[] = DRV_VERSION;
61 static const char igb_driver_string[] =
62 "Intel(R) Gigabit Ethernet Network Driver";
63 static const char igb_copyright[] = "Copyright (c) 2007-2011 Intel Corporation.";
65 static const struct e1000_info *igb_info_tbl[] = {
66 [board_82575] = &e1000_82575_info,
69 static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
70 { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
71 { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
72 { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
73 { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
74 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
75 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
76 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER), board_82575 },
77 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
78 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
79 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
80 { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
81 { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
82 { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
83 { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
84 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
85 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
86 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
87 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
88 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
89 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
90 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
91 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
92 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
93 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
94 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
95 /* required last entry */
96 {0, }
99 MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
101 void igb_reset(struct igb_adapter *);
102 static int igb_setup_all_tx_resources(struct igb_adapter *);
103 static int igb_setup_all_rx_resources(struct igb_adapter *);
104 static void igb_free_all_tx_resources(struct igb_adapter *);
105 static void igb_free_all_rx_resources(struct igb_adapter *);
106 static void igb_setup_mrqc(struct igb_adapter *);
107 static int igb_probe(struct pci_dev *, const struct pci_device_id *);
108 static void __devexit igb_remove(struct pci_dev *pdev);
109 static void igb_init_hw_timer(struct igb_adapter *adapter);
110 static int igb_sw_init(struct igb_adapter *);
111 static int igb_open(struct net_device *);
112 static int igb_close(struct net_device *);
113 static void igb_configure_tx(struct igb_adapter *);
114 static void igb_configure_rx(struct igb_adapter *);
115 static void igb_clean_all_tx_rings(struct igb_adapter *);
116 static void igb_clean_all_rx_rings(struct igb_adapter *);
117 static void igb_clean_tx_ring(struct igb_ring *);
118 static void igb_clean_rx_ring(struct igb_ring *);
119 static void igb_set_rx_mode(struct net_device *);
120 static void igb_update_phy_info(unsigned long);
121 static void igb_watchdog(unsigned long);
122 static void igb_watchdog_task(struct work_struct *);
123 static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *);
124 static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *dev,
125 struct rtnl_link_stats64 *stats);
126 static int igb_change_mtu(struct net_device *, int);
127 static int igb_set_mac(struct net_device *, void *);
128 static void igb_set_uta(struct igb_adapter *adapter);
129 static irqreturn_t igb_intr(int irq, void *);
130 static irqreturn_t igb_intr_msi(int irq, void *);
131 static irqreturn_t igb_msix_other(int irq, void *);
132 static irqreturn_t igb_msix_ring(int irq, void *);
133 #ifdef CONFIG_IGB_DCA
134 static void igb_update_dca(struct igb_q_vector *);
135 static void igb_setup_dca(struct igb_adapter *);
136 #endif /* CONFIG_IGB_DCA */
137 static bool igb_clean_tx_irq(struct igb_q_vector *);
138 static int igb_poll(struct napi_struct *, int);
139 static bool igb_clean_rx_irq_adv(struct igb_q_vector *, int *, int);
140 static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
141 static void igb_tx_timeout(struct net_device *);
142 static void igb_reset_task(struct work_struct *);
143 static void igb_vlan_rx_register(struct net_device *, struct vlan_group *);
144 static void igb_vlan_rx_add_vid(struct net_device *, u16);
145 static void igb_vlan_rx_kill_vid(struct net_device *, u16);
146 static void igb_restore_vlan(struct igb_adapter *);
147 static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
148 static void igb_ping_all_vfs(struct igb_adapter *);
149 static void igb_msg_task(struct igb_adapter *);
150 static void igb_vmm_control(struct igb_adapter *);
151 static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
152 static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
153 static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
154 static int igb_ndo_set_vf_vlan(struct net_device *netdev,
155 int vf, u16 vlan, u8 qos);
156 static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
157 static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
158 struct ifla_vf_info *ivi);
159 static void igb_check_vf_rate_limit(struct igb_adapter *);
161 #ifdef CONFIG_PM
162 static int igb_suspend(struct pci_dev *, pm_message_t);
163 static int igb_resume(struct pci_dev *);
164 #endif
165 static void igb_shutdown(struct pci_dev *);
166 #ifdef CONFIG_IGB_DCA
167 static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
168 static struct notifier_block dca_notifier = {
169 .notifier_call = igb_notify_dca,
170 .next = NULL,
171 .priority = 0
173 #endif
174 #ifdef CONFIG_NET_POLL_CONTROLLER
175 /* for netdump / net console */
176 static void igb_netpoll(struct net_device *);
177 #endif
178 #ifdef CONFIG_PCI_IOV
179 static unsigned int max_vfs = 0;
180 module_param(max_vfs, uint, 0);
181 MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate "
182 "per physical function");
183 #endif /* CONFIG_PCI_IOV */
185 static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
186 pci_channel_state_t);
187 static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
188 static void igb_io_resume(struct pci_dev *);
190 static struct pci_error_handlers igb_err_handler = {
191 .error_detected = igb_io_error_detected,
192 .slot_reset = igb_io_slot_reset,
193 .resume = igb_io_resume,
197 static struct pci_driver igb_driver = {
198 .name = igb_driver_name,
199 .id_table = igb_pci_tbl,
200 .probe = igb_probe,
201 .remove = __devexit_p(igb_remove),
202 #ifdef CONFIG_PM
203 /* Power Management Hooks */
204 .suspend = igb_suspend,
205 .resume = igb_resume,
206 #endif
207 .shutdown = igb_shutdown,
208 .err_handler = &igb_err_handler
211 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
212 MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
213 MODULE_LICENSE("GPL");
214 MODULE_VERSION(DRV_VERSION);
216 struct igb_reg_info {
217 u32 ofs;
218 char *name;
221 static const struct igb_reg_info igb_reg_info_tbl[] = {
223 /* General Registers */
224 {E1000_CTRL, "CTRL"},
225 {E1000_STATUS, "STATUS"},
226 {E1000_CTRL_EXT, "CTRL_EXT"},
228 /* Interrupt Registers */
229 {E1000_ICR, "ICR"},
231 /* RX Registers */
232 {E1000_RCTL, "RCTL"},
233 {E1000_RDLEN(0), "RDLEN"},
234 {E1000_RDH(0), "RDH"},
235 {E1000_RDT(0), "RDT"},
236 {E1000_RXDCTL(0), "RXDCTL"},
237 {E1000_RDBAL(0), "RDBAL"},
238 {E1000_RDBAH(0), "RDBAH"},
240 /* TX Registers */
241 {E1000_TCTL, "TCTL"},
242 {E1000_TDBAL(0), "TDBAL"},
243 {E1000_TDBAH(0), "TDBAH"},
244 {E1000_TDLEN(0), "TDLEN"},
245 {E1000_TDH(0), "TDH"},
246 {E1000_TDT(0), "TDT"},
247 {E1000_TXDCTL(0), "TXDCTL"},
248 {E1000_TDFH, "TDFH"},
249 {E1000_TDFT, "TDFT"},
250 {E1000_TDFHS, "TDFHS"},
251 {E1000_TDFPC, "TDFPC"},
253 /* List Terminator */
258 * igb_regdump - register printout routine
260 static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
262 int n = 0;
263 char rname[16];
264 u32 regs[8];
266 switch (reginfo->ofs) {
267 case E1000_RDLEN(0):
268 for (n = 0; n < 4; n++)
269 regs[n] = rd32(E1000_RDLEN(n));
270 break;
271 case E1000_RDH(0):
272 for (n = 0; n < 4; n++)
273 regs[n] = rd32(E1000_RDH(n));
274 break;
275 case E1000_RDT(0):
276 for (n = 0; n < 4; n++)
277 regs[n] = rd32(E1000_RDT(n));
278 break;
279 case E1000_RXDCTL(0):
280 for (n = 0; n < 4; n++)
281 regs[n] = rd32(E1000_RXDCTL(n));
282 break;
283 case E1000_RDBAL(0):
284 for (n = 0; n < 4; n++)
285 regs[n] = rd32(E1000_RDBAL(n));
286 break;
287 case E1000_RDBAH(0):
288 for (n = 0; n < 4; n++)
289 regs[n] = rd32(E1000_RDBAH(n));
290 break;
291 case E1000_TDBAL(0):
292 for (n = 0; n < 4; n++)
293 regs[n] = rd32(E1000_RDBAL(n));
294 break;
295 case E1000_TDBAH(0):
296 for (n = 0; n < 4; n++)
297 regs[n] = rd32(E1000_TDBAH(n));
298 break;
299 case E1000_TDLEN(0):
300 for (n = 0; n < 4; n++)
301 regs[n] = rd32(E1000_TDLEN(n));
302 break;
303 case E1000_TDH(0):
304 for (n = 0; n < 4; n++)
305 regs[n] = rd32(E1000_TDH(n));
306 break;
307 case E1000_TDT(0):
308 for (n = 0; n < 4; n++)
309 regs[n] = rd32(E1000_TDT(n));
310 break;
311 case E1000_TXDCTL(0):
312 for (n = 0; n < 4; n++)
313 regs[n] = rd32(E1000_TXDCTL(n));
314 break;
315 default:
316 printk(KERN_INFO "%-15s %08x\n",
317 reginfo->name, rd32(reginfo->ofs));
318 return;
321 snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
322 printk(KERN_INFO "%-15s ", rname);
323 for (n = 0; n < 4; n++)
324 printk(KERN_CONT "%08x ", regs[n]);
325 printk(KERN_CONT "\n");
329 * igb_dump - Print registers, tx-rings and rx-rings
331 static void igb_dump(struct igb_adapter *adapter)
333 struct net_device *netdev = adapter->netdev;
334 struct e1000_hw *hw = &adapter->hw;
335 struct igb_reg_info *reginfo;
336 int n = 0;
337 struct igb_ring *tx_ring;
338 union e1000_adv_tx_desc *tx_desc;
339 struct my_u0 { u64 a; u64 b; } *u0;
340 struct igb_buffer *buffer_info;
341 struct igb_ring *rx_ring;
342 union e1000_adv_rx_desc *rx_desc;
343 u32 staterr;
344 int i = 0;
346 if (!netif_msg_hw(adapter))
347 return;
349 /* Print netdevice Info */
350 if (netdev) {
351 dev_info(&adapter->pdev->dev, "Net device Info\n");
352 printk(KERN_INFO "Device Name state "
353 "trans_start last_rx\n");
354 printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
355 netdev->name,
356 netdev->state,
357 netdev->trans_start,
358 netdev->last_rx);
361 /* Print Registers */
362 dev_info(&adapter->pdev->dev, "Register Dump\n");
363 printk(KERN_INFO " Register Name Value\n");
364 for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
365 reginfo->name; reginfo++) {
366 igb_regdump(hw, reginfo);
369 /* Print TX Ring Summary */
370 if (!netdev || !netif_running(netdev))
371 goto exit;
373 dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
374 printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
375 " leng ntw timestamp\n");
376 for (n = 0; n < adapter->num_tx_queues; n++) {
377 tx_ring = adapter->tx_ring[n];
378 buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
379 printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
380 n, tx_ring->next_to_use, tx_ring->next_to_clean,
381 (u64)buffer_info->dma,
382 buffer_info->length,
383 buffer_info->next_to_watch,
384 (u64)buffer_info->time_stamp);
387 /* Print TX Rings */
388 if (!netif_msg_tx_done(adapter))
389 goto rx_ring_summary;
391 dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
393 /* Transmit Descriptor Formats
395 * Advanced Transmit Descriptor
396 * +--------------------------------------------------------------+
397 * 0 | Buffer Address [63:0] |
398 * +--------------------------------------------------------------+
399 * 8 | PAYLEN | PORTS |CC|IDX | STA | DCMD |DTYP|MAC|RSV| DTALEN |
400 * +--------------------------------------------------------------+
401 * 63 46 45 40 39 38 36 35 32 31 24 15 0
404 for (n = 0; n < adapter->num_tx_queues; n++) {
405 tx_ring = adapter->tx_ring[n];
406 printk(KERN_INFO "------------------------------------\n");
407 printk(KERN_INFO "TX QUEUE INDEX = %d\n", tx_ring->queue_index);
408 printk(KERN_INFO "------------------------------------\n");
409 printk(KERN_INFO "T [desc] [address 63:0 ] "
410 "[PlPOCIStDDM Ln] [bi->dma ] "
411 "leng ntw timestamp bi->skb\n");
413 for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
414 tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
415 buffer_info = &tx_ring->buffer_info[i];
416 u0 = (struct my_u0 *)tx_desc;
417 printk(KERN_INFO "T [0x%03X] %016llX %016llX %016llX"
418 " %04X %3X %016llX %p", i,
419 le64_to_cpu(u0->a),
420 le64_to_cpu(u0->b),
421 (u64)buffer_info->dma,
422 buffer_info->length,
423 buffer_info->next_to_watch,
424 (u64)buffer_info->time_stamp,
425 buffer_info->skb);
426 if (i == tx_ring->next_to_use &&
427 i == tx_ring->next_to_clean)
428 printk(KERN_CONT " NTC/U\n");
429 else if (i == tx_ring->next_to_use)
430 printk(KERN_CONT " NTU\n");
431 else if (i == tx_ring->next_to_clean)
432 printk(KERN_CONT " NTC\n");
433 else
434 printk(KERN_CONT "\n");
436 if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
437 print_hex_dump(KERN_INFO, "",
438 DUMP_PREFIX_ADDRESS,
439 16, 1, phys_to_virt(buffer_info->dma),
440 buffer_info->length, true);
444 /* Print RX Rings Summary */
445 rx_ring_summary:
446 dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
447 printk(KERN_INFO "Queue [NTU] [NTC]\n");
448 for (n = 0; n < adapter->num_rx_queues; n++) {
449 rx_ring = adapter->rx_ring[n];
450 printk(KERN_INFO " %5d %5X %5X\n", n,
451 rx_ring->next_to_use, rx_ring->next_to_clean);
454 /* Print RX Rings */
455 if (!netif_msg_rx_status(adapter))
456 goto exit;
458 dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
460 /* Advanced Receive Descriptor (Read) Format
461 * 63 1 0
462 * +-----------------------------------------------------+
463 * 0 | Packet Buffer Address [63:1] |A0/NSE|
464 * +----------------------------------------------+------+
465 * 8 | Header Buffer Address [63:1] | DD |
466 * +-----------------------------------------------------+
469 * Advanced Receive Descriptor (Write-Back) Format
471 * 63 48 47 32 31 30 21 20 17 16 4 3 0
472 * +------------------------------------------------------+
473 * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
474 * | Checksum Ident | | | | Type | Type |
475 * +------------------------------------------------------+
476 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
477 * +------------------------------------------------------+
478 * 63 48 47 32 31 20 19 0
481 for (n = 0; n < adapter->num_rx_queues; n++) {
482 rx_ring = adapter->rx_ring[n];
483 printk(KERN_INFO "------------------------------------\n");
484 printk(KERN_INFO "RX QUEUE INDEX = %d\n", rx_ring->queue_index);
485 printk(KERN_INFO "------------------------------------\n");
486 printk(KERN_INFO "R [desc] [ PktBuf A0] "
487 "[ HeadBuf DD] [bi->dma ] [bi->skb] "
488 "<-- Adv Rx Read format\n");
489 printk(KERN_INFO "RWB[desc] [PcsmIpSHl PtRs] "
490 "[vl er S cks ln] ---------------- [bi->skb] "
491 "<-- Adv Rx Write-Back format\n");
493 for (i = 0; i < rx_ring->count; i++) {
494 buffer_info = &rx_ring->buffer_info[i];
495 rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
496 u0 = (struct my_u0 *)rx_desc;
497 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
498 if (staterr & E1000_RXD_STAT_DD) {
499 /* Descriptor Done */
500 printk(KERN_INFO "RWB[0x%03X] %016llX "
501 "%016llX ---------------- %p", i,
502 le64_to_cpu(u0->a),
503 le64_to_cpu(u0->b),
504 buffer_info->skb);
505 } else {
506 printk(KERN_INFO "R [0x%03X] %016llX "
507 "%016llX %016llX %p", i,
508 le64_to_cpu(u0->a),
509 le64_to_cpu(u0->b),
510 (u64)buffer_info->dma,
511 buffer_info->skb);
513 if (netif_msg_pktdata(adapter)) {
514 print_hex_dump(KERN_INFO, "",
515 DUMP_PREFIX_ADDRESS,
516 16, 1,
517 phys_to_virt(buffer_info->dma),
518 rx_ring->rx_buffer_len, true);
519 if (rx_ring->rx_buffer_len
520 < IGB_RXBUFFER_1024)
521 print_hex_dump(KERN_INFO, "",
522 DUMP_PREFIX_ADDRESS,
523 16, 1,
524 phys_to_virt(
525 buffer_info->page_dma +
526 buffer_info->page_offset),
527 PAGE_SIZE/2, true);
531 if (i == rx_ring->next_to_use)
532 printk(KERN_CONT " NTU\n");
533 else if (i == rx_ring->next_to_clean)
534 printk(KERN_CONT " NTC\n");
535 else
536 printk(KERN_CONT "\n");
541 exit:
542 return;
547 * igb_read_clock - read raw cycle counter (to be used by time counter)
549 static cycle_t igb_read_clock(const struct cyclecounter *tc)
551 struct igb_adapter *adapter =
552 container_of(tc, struct igb_adapter, cycles);
553 struct e1000_hw *hw = &adapter->hw;
554 u64 stamp = 0;
555 int shift = 0;
558 * The timestamp latches on lowest register read. For the 82580
559 * the lowest register is SYSTIMR instead of SYSTIML. However we never
560 * adjusted TIMINCA so SYSTIMR will just read as all 0s so ignore it.
562 if (hw->mac.type == e1000_82580) {
563 stamp = rd32(E1000_SYSTIMR) >> 8;
564 shift = IGB_82580_TSYNC_SHIFT;
567 stamp |= (u64)rd32(E1000_SYSTIML) << shift;
568 stamp |= (u64)rd32(E1000_SYSTIMH) << (shift + 32);
569 return stamp;
573 * igb_get_hw_dev - return device
574 * used by hardware layer to print debugging information
576 struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
578 struct igb_adapter *adapter = hw->back;
579 return adapter->netdev;
583 * igb_init_module - Driver Registration Routine
585 * igb_init_module is the first routine called when the driver is
586 * loaded. All it does is register with the PCI subsystem.
588 static int __init igb_init_module(void)
590 int ret;
591 printk(KERN_INFO "%s - version %s\n",
592 igb_driver_string, igb_driver_version);
594 printk(KERN_INFO "%s\n", igb_copyright);
596 #ifdef CONFIG_IGB_DCA
597 dca_register_notify(&dca_notifier);
598 #endif
599 ret = pci_register_driver(&igb_driver);
600 return ret;
603 module_init(igb_init_module);
606 * igb_exit_module - Driver Exit Cleanup Routine
608 * igb_exit_module is called just before the driver is removed
609 * from memory.
611 static void __exit igb_exit_module(void)
613 #ifdef CONFIG_IGB_DCA
614 dca_unregister_notify(&dca_notifier);
615 #endif
616 pci_unregister_driver(&igb_driver);
619 module_exit(igb_exit_module);
621 #define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
623 * igb_cache_ring_register - Descriptor ring to register mapping
624 * @adapter: board private structure to initialize
626 * Once we know the feature-set enabled for the device, we'll cache
627 * the register offset the descriptor ring is assigned to.
629 static void igb_cache_ring_register(struct igb_adapter *adapter)
631 int i = 0, j = 0;
632 u32 rbase_offset = adapter->vfs_allocated_count;
634 switch (adapter->hw.mac.type) {
635 case e1000_82576:
636 /* The queues are allocated for virtualization such that VF 0
637 * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
638 * In order to avoid collision we start at the first free queue
639 * and continue consuming queues in the same sequence
641 if (adapter->vfs_allocated_count) {
642 for (; i < adapter->rss_queues; i++)
643 adapter->rx_ring[i]->reg_idx = rbase_offset +
644 Q_IDX_82576(i);
646 case e1000_82575:
647 case e1000_82580:
648 case e1000_i350:
649 default:
650 for (; i < adapter->num_rx_queues; i++)
651 adapter->rx_ring[i]->reg_idx = rbase_offset + i;
652 for (; j < adapter->num_tx_queues; j++)
653 adapter->tx_ring[j]->reg_idx = rbase_offset + j;
654 break;
658 static void igb_free_queues(struct igb_adapter *adapter)
660 int i;
662 for (i = 0; i < adapter->num_tx_queues; i++) {
663 kfree(adapter->tx_ring[i]);
664 adapter->tx_ring[i] = NULL;
666 for (i = 0; i < adapter->num_rx_queues; i++) {
667 kfree(adapter->rx_ring[i]);
668 adapter->rx_ring[i] = NULL;
670 adapter->num_rx_queues = 0;
671 adapter->num_tx_queues = 0;
675 * igb_alloc_queues - Allocate memory for all rings
676 * @adapter: board private structure to initialize
678 * We allocate one ring per queue at run-time since we don't know the
679 * number of queues at compile-time.
681 static int igb_alloc_queues(struct igb_adapter *adapter)
683 struct igb_ring *ring;
684 int i;
686 for (i = 0; i < adapter->num_tx_queues; i++) {
687 ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
688 if (!ring)
689 goto err;
690 ring->count = adapter->tx_ring_count;
691 ring->queue_index = i;
692 ring->dev = &adapter->pdev->dev;
693 ring->netdev = adapter->netdev;
694 /* For 82575, context index must be unique per ring. */
695 if (adapter->hw.mac.type == e1000_82575)
696 ring->flags = IGB_RING_FLAG_TX_CTX_IDX;
697 adapter->tx_ring[i] = ring;
700 for (i = 0; i < adapter->num_rx_queues; i++) {
701 ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
702 if (!ring)
703 goto err;
704 ring->count = adapter->rx_ring_count;
705 ring->queue_index = i;
706 ring->dev = &adapter->pdev->dev;
707 ring->netdev = adapter->netdev;
708 ring->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
709 ring->flags = IGB_RING_FLAG_RX_CSUM; /* enable rx checksum */
710 /* set flag indicating ring supports SCTP checksum offload */
711 if (adapter->hw.mac.type >= e1000_82576)
712 ring->flags |= IGB_RING_FLAG_RX_SCTP_CSUM;
713 adapter->rx_ring[i] = ring;
716 igb_cache_ring_register(adapter);
718 return 0;
720 err:
721 igb_free_queues(adapter);
723 return -ENOMEM;
726 #define IGB_N0_QUEUE -1
727 static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
729 u32 msixbm = 0;
730 struct igb_adapter *adapter = q_vector->adapter;
731 struct e1000_hw *hw = &adapter->hw;
732 u32 ivar, index;
733 int rx_queue = IGB_N0_QUEUE;
734 int tx_queue = IGB_N0_QUEUE;
736 if (q_vector->rx_ring)
737 rx_queue = q_vector->rx_ring->reg_idx;
738 if (q_vector->tx_ring)
739 tx_queue = q_vector->tx_ring->reg_idx;
741 switch (hw->mac.type) {
742 case e1000_82575:
743 /* The 82575 assigns vectors using a bitmask, which matches the
744 bitmask for the EICR/EIMS/EIMC registers. To assign one
745 or more queues to a vector, we write the appropriate bits
746 into the MSIXBM register for that vector. */
747 if (rx_queue > IGB_N0_QUEUE)
748 msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
749 if (tx_queue > IGB_N0_QUEUE)
750 msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
751 if (!adapter->msix_entries && msix_vector == 0)
752 msixbm |= E1000_EIMS_OTHER;
753 array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
754 q_vector->eims_value = msixbm;
755 break;
756 case e1000_82576:
757 /* 82576 uses a table-based method for assigning vectors.
758 Each queue has a single entry in the table to which we write
759 a vector number along with a "valid" bit. Sadly, the layout
760 of the table is somewhat counterintuitive. */
761 if (rx_queue > IGB_N0_QUEUE) {
762 index = (rx_queue & 0x7);
763 ivar = array_rd32(E1000_IVAR0, index);
764 if (rx_queue < 8) {
765 /* vector goes into low byte of register */
766 ivar = ivar & 0xFFFFFF00;
767 ivar |= msix_vector | E1000_IVAR_VALID;
768 } else {
769 /* vector goes into third byte of register */
770 ivar = ivar & 0xFF00FFFF;
771 ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
773 array_wr32(E1000_IVAR0, index, ivar);
775 if (tx_queue > IGB_N0_QUEUE) {
776 index = (tx_queue & 0x7);
777 ivar = array_rd32(E1000_IVAR0, index);
778 if (tx_queue < 8) {
779 /* vector goes into second byte of register */
780 ivar = ivar & 0xFFFF00FF;
781 ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
782 } else {
783 /* vector goes into high byte of register */
784 ivar = ivar & 0x00FFFFFF;
785 ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
787 array_wr32(E1000_IVAR0, index, ivar);
789 q_vector->eims_value = 1 << msix_vector;
790 break;
791 case e1000_82580:
792 case e1000_i350:
793 /* 82580 uses the same table-based approach as 82576 but has fewer
794 entries as a result we carry over for queues greater than 4. */
795 if (rx_queue > IGB_N0_QUEUE) {
796 index = (rx_queue >> 1);
797 ivar = array_rd32(E1000_IVAR0, index);
798 if (rx_queue & 0x1) {
799 /* vector goes into third byte of register */
800 ivar = ivar & 0xFF00FFFF;
801 ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
802 } else {
803 /* vector goes into low byte of register */
804 ivar = ivar & 0xFFFFFF00;
805 ivar |= msix_vector | E1000_IVAR_VALID;
807 array_wr32(E1000_IVAR0, index, ivar);
809 if (tx_queue > IGB_N0_QUEUE) {
810 index = (tx_queue >> 1);
811 ivar = array_rd32(E1000_IVAR0, index);
812 if (tx_queue & 0x1) {
813 /* vector goes into high byte of register */
814 ivar = ivar & 0x00FFFFFF;
815 ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
816 } else {
817 /* vector goes into second byte of register */
818 ivar = ivar & 0xFFFF00FF;
819 ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
821 array_wr32(E1000_IVAR0, index, ivar);
823 q_vector->eims_value = 1 << msix_vector;
824 break;
825 default:
826 BUG();
827 break;
830 /* add q_vector eims value to global eims_enable_mask */
831 adapter->eims_enable_mask |= q_vector->eims_value;
833 /* configure q_vector to set itr on first interrupt */
834 q_vector->set_itr = 1;
838 * igb_configure_msix - Configure MSI-X hardware
840 * igb_configure_msix sets up the hardware to properly
841 * generate MSI-X interrupts.
843 static void igb_configure_msix(struct igb_adapter *adapter)
845 u32 tmp;
846 int i, vector = 0;
847 struct e1000_hw *hw = &adapter->hw;
849 adapter->eims_enable_mask = 0;
851 /* set vector for other causes, i.e. link changes */
852 switch (hw->mac.type) {
853 case e1000_82575:
854 tmp = rd32(E1000_CTRL_EXT);
855 /* enable MSI-X PBA support*/
856 tmp |= E1000_CTRL_EXT_PBA_CLR;
858 /* Auto-Mask interrupts upon ICR read. */
859 tmp |= E1000_CTRL_EXT_EIAME;
860 tmp |= E1000_CTRL_EXT_IRCA;
862 wr32(E1000_CTRL_EXT, tmp);
864 /* enable msix_other interrupt */
865 array_wr32(E1000_MSIXBM(0), vector++,
866 E1000_EIMS_OTHER);
867 adapter->eims_other = E1000_EIMS_OTHER;
869 break;
871 case e1000_82576:
872 case e1000_82580:
873 case e1000_i350:
874 /* Turn on MSI-X capability first, or our settings
875 * won't stick. And it will take days to debug. */
876 wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
877 E1000_GPIE_PBA | E1000_GPIE_EIAME |
878 E1000_GPIE_NSICR);
880 /* enable msix_other interrupt */
881 adapter->eims_other = 1 << vector;
882 tmp = (vector++ | E1000_IVAR_VALID) << 8;
884 wr32(E1000_IVAR_MISC, tmp);
885 break;
886 default:
887 /* do nothing, since nothing else supports MSI-X */
888 break;
889 } /* switch (hw->mac.type) */
891 adapter->eims_enable_mask |= adapter->eims_other;
893 for (i = 0; i < adapter->num_q_vectors; i++)
894 igb_assign_vector(adapter->q_vector[i], vector++);
896 wrfl();
900 * igb_request_msix - Initialize MSI-X interrupts
902 * igb_request_msix allocates MSI-X vectors and requests interrupts from the
903 * kernel.
905 static int igb_request_msix(struct igb_adapter *adapter)
907 struct net_device *netdev = adapter->netdev;
908 struct e1000_hw *hw = &adapter->hw;
909 int i, err = 0, vector = 0;
911 err = request_irq(adapter->msix_entries[vector].vector,
912 igb_msix_other, 0, netdev->name, adapter);
913 if (err)
914 goto out;
915 vector++;
917 for (i = 0; i < adapter->num_q_vectors; i++) {
918 struct igb_q_vector *q_vector = adapter->q_vector[i];
920 q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
922 if (q_vector->rx_ring && q_vector->tx_ring)
923 sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
924 q_vector->rx_ring->queue_index);
925 else if (q_vector->tx_ring)
926 sprintf(q_vector->name, "%s-tx-%u", netdev->name,
927 q_vector->tx_ring->queue_index);
928 else if (q_vector->rx_ring)
929 sprintf(q_vector->name, "%s-rx-%u", netdev->name,
930 q_vector->rx_ring->queue_index);
931 else
932 sprintf(q_vector->name, "%s-unused", netdev->name);
934 err = request_irq(adapter->msix_entries[vector].vector,
935 igb_msix_ring, 0, q_vector->name,
936 q_vector);
937 if (err)
938 goto out;
939 vector++;
942 igb_configure_msix(adapter);
943 return 0;
944 out:
945 return err;
948 static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
950 if (adapter->msix_entries) {
951 pci_disable_msix(adapter->pdev);
952 kfree(adapter->msix_entries);
953 adapter->msix_entries = NULL;
954 } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
955 pci_disable_msi(adapter->pdev);
960 * igb_free_q_vectors - Free memory allocated for interrupt vectors
961 * @adapter: board private structure to initialize
963 * This function frees the memory allocated to the q_vectors. In addition if
964 * NAPI is enabled it will delete any references to the NAPI struct prior
965 * to freeing the q_vector.
967 static void igb_free_q_vectors(struct igb_adapter *adapter)
969 int v_idx;
971 for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
972 struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
973 adapter->q_vector[v_idx] = NULL;
974 if (!q_vector)
975 continue;
976 netif_napi_del(&q_vector->napi);
977 kfree(q_vector);
979 adapter->num_q_vectors = 0;
983 * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
985 * This function resets the device so that it has 0 rx queues, tx queues, and
986 * MSI-X interrupts allocated.
988 static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
990 igb_free_queues(adapter);
991 igb_free_q_vectors(adapter);
992 igb_reset_interrupt_capability(adapter);
996 * igb_set_interrupt_capability - set MSI or MSI-X if supported
998 * Attempt to configure interrupts using the best available
999 * capabilities of the hardware and kernel.
1001 static int igb_set_interrupt_capability(struct igb_adapter *adapter)
1003 int err;
1004 int numvecs, i;
1006 /* Number of supported queues. */
1007 adapter->num_rx_queues = adapter->rss_queues;
1008 if (adapter->vfs_allocated_count)
1009 adapter->num_tx_queues = 1;
1010 else
1011 adapter->num_tx_queues = adapter->rss_queues;
1013 /* start with one vector for every rx queue */
1014 numvecs = adapter->num_rx_queues;
1016 /* if tx handler is separate add 1 for every tx queue */
1017 if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
1018 numvecs += adapter->num_tx_queues;
1020 /* store the number of vectors reserved for queues */
1021 adapter->num_q_vectors = numvecs;
1023 /* add 1 vector for link status interrupts */
1024 numvecs++;
1025 adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
1026 GFP_KERNEL);
1027 if (!adapter->msix_entries)
1028 goto msi_only;
1030 for (i = 0; i < numvecs; i++)
1031 adapter->msix_entries[i].entry = i;
1033 err = pci_enable_msix(adapter->pdev,
1034 adapter->msix_entries,
1035 numvecs);
1036 if (err == 0)
1037 goto out;
1039 igb_reset_interrupt_capability(adapter);
1041 /* If we can't do MSI-X, try MSI */
1042 msi_only:
1043 #ifdef CONFIG_PCI_IOV
1044 /* disable SR-IOV for non MSI-X configurations */
1045 if (adapter->vf_data) {
1046 struct e1000_hw *hw = &adapter->hw;
1047 /* disable iov and allow time for transactions to clear */
1048 pci_disable_sriov(adapter->pdev);
1049 msleep(500);
1051 kfree(adapter->vf_data);
1052 adapter->vf_data = NULL;
1053 wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
1054 msleep(100);
1055 dev_info(&adapter->pdev->dev, "IOV Disabled\n");
1057 #endif
1058 adapter->vfs_allocated_count = 0;
1059 adapter->rss_queues = 1;
1060 adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
1061 adapter->num_rx_queues = 1;
1062 adapter->num_tx_queues = 1;
1063 adapter->num_q_vectors = 1;
1064 if (!pci_enable_msi(adapter->pdev))
1065 adapter->flags |= IGB_FLAG_HAS_MSI;
1066 out:
1067 /* Notify the stack of the (possibly) reduced queue counts. */
1068 netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
1069 return netif_set_real_num_rx_queues(adapter->netdev,
1070 adapter->num_rx_queues);
1074 * igb_alloc_q_vectors - Allocate memory for interrupt vectors
1075 * @adapter: board private structure to initialize
1077 * We allocate one q_vector per queue interrupt. If allocation fails we
1078 * return -ENOMEM.
1080 static int igb_alloc_q_vectors(struct igb_adapter *adapter)
1082 struct igb_q_vector *q_vector;
1083 struct e1000_hw *hw = &adapter->hw;
1084 int v_idx;
1086 for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
1087 q_vector = kzalloc(sizeof(struct igb_q_vector), GFP_KERNEL);
1088 if (!q_vector)
1089 goto err_out;
1090 q_vector->adapter = adapter;
1091 q_vector->itr_register = hw->hw_addr + E1000_EITR(0);
1092 q_vector->itr_val = IGB_START_ITR;
1093 netif_napi_add(adapter->netdev, &q_vector->napi, igb_poll, 64);
1094 adapter->q_vector[v_idx] = q_vector;
1096 return 0;
1098 err_out:
1099 igb_free_q_vectors(adapter);
1100 return -ENOMEM;
1103 static void igb_map_rx_ring_to_vector(struct igb_adapter *adapter,
1104 int ring_idx, int v_idx)
1106 struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
1108 q_vector->rx_ring = adapter->rx_ring[ring_idx];
1109 q_vector->rx_ring->q_vector = q_vector;
1110 q_vector->itr_val = adapter->rx_itr_setting;
1111 if (q_vector->itr_val && q_vector->itr_val <= 3)
1112 q_vector->itr_val = IGB_START_ITR;
1115 static void igb_map_tx_ring_to_vector(struct igb_adapter *adapter,
1116 int ring_idx, int v_idx)
1118 struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
1120 q_vector->tx_ring = adapter->tx_ring[ring_idx];
1121 q_vector->tx_ring->q_vector = q_vector;
1122 q_vector->itr_val = adapter->tx_itr_setting;
1123 if (q_vector->itr_val && q_vector->itr_val <= 3)
1124 q_vector->itr_val = IGB_START_ITR;
1128 * igb_map_ring_to_vector - maps allocated queues to vectors
1130 * This function maps the recently allocated queues to vectors.
1132 static int igb_map_ring_to_vector(struct igb_adapter *adapter)
1134 int i;
1135 int v_idx = 0;
1137 if ((adapter->num_q_vectors < adapter->num_rx_queues) ||
1138 (adapter->num_q_vectors < adapter->num_tx_queues))
1139 return -ENOMEM;
1141 if (adapter->num_q_vectors >=
1142 (adapter->num_rx_queues + adapter->num_tx_queues)) {
1143 for (i = 0; i < adapter->num_rx_queues; i++)
1144 igb_map_rx_ring_to_vector(adapter, i, v_idx++);
1145 for (i = 0; i < adapter->num_tx_queues; i++)
1146 igb_map_tx_ring_to_vector(adapter, i, v_idx++);
1147 } else {
1148 for (i = 0; i < adapter->num_rx_queues; i++) {
1149 if (i < adapter->num_tx_queues)
1150 igb_map_tx_ring_to_vector(adapter, i, v_idx);
1151 igb_map_rx_ring_to_vector(adapter, i, v_idx++);
1153 for (; i < adapter->num_tx_queues; i++)
1154 igb_map_tx_ring_to_vector(adapter, i, v_idx++);
1156 return 0;
1160 * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
1162 * This function initializes the interrupts and allocates all of the queues.
1164 static int igb_init_interrupt_scheme(struct igb_adapter *adapter)
1166 struct pci_dev *pdev = adapter->pdev;
1167 int err;
1169 err = igb_set_interrupt_capability(adapter);
1170 if (err)
1171 return err;
1173 err = igb_alloc_q_vectors(adapter);
1174 if (err) {
1175 dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
1176 goto err_alloc_q_vectors;
1179 err = igb_alloc_queues(adapter);
1180 if (err) {
1181 dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
1182 goto err_alloc_queues;
1185 err = igb_map_ring_to_vector(adapter);
1186 if (err) {
1187 dev_err(&pdev->dev, "Invalid q_vector to ring mapping\n");
1188 goto err_map_queues;
1192 return 0;
1193 err_map_queues:
1194 igb_free_queues(adapter);
1195 err_alloc_queues:
1196 igb_free_q_vectors(adapter);
1197 err_alloc_q_vectors:
1198 igb_reset_interrupt_capability(adapter);
1199 return err;
1203 * igb_request_irq - initialize interrupts
1205 * Attempts to configure interrupts using the best available
1206 * capabilities of the hardware and kernel.
1208 static int igb_request_irq(struct igb_adapter *adapter)
1210 struct net_device *netdev = adapter->netdev;
1211 struct pci_dev *pdev = adapter->pdev;
1212 int err = 0;
1214 if (adapter->msix_entries) {
1215 err = igb_request_msix(adapter);
1216 if (!err)
1217 goto request_done;
1218 /* fall back to MSI */
1219 igb_clear_interrupt_scheme(adapter);
1220 if (!pci_enable_msi(adapter->pdev))
1221 adapter->flags |= IGB_FLAG_HAS_MSI;
1222 igb_free_all_tx_resources(adapter);
1223 igb_free_all_rx_resources(adapter);
1224 adapter->num_tx_queues = 1;
1225 adapter->num_rx_queues = 1;
1226 adapter->num_q_vectors = 1;
1227 err = igb_alloc_q_vectors(adapter);
1228 if (err) {
1229 dev_err(&pdev->dev,
1230 "Unable to allocate memory for vectors\n");
1231 goto request_done;
1233 err = igb_alloc_queues(adapter);
1234 if (err) {
1235 dev_err(&pdev->dev,
1236 "Unable to allocate memory for queues\n");
1237 igb_free_q_vectors(adapter);
1238 goto request_done;
1240 igb_setup_all_tx_resources(adapter);
1241 igb_setup_all_rx_resources(adapter);
1242 } else {
1243 igb_assign_vector(adapter->q_vector[0], 0);
1246 if (adapter->flags & IGB_FLAG_HAS_MSI) {
1247 err = request_irq(adapter->pdev->irq, igb_intr_msi, 0,
1248 netdev->name, adapter);
1249 if (!err)
1250 goto request_done;
1252 /* fall back to legacy interrupts */
1253 igb_reset_interrupt_capability(adapter);
1254 adapter->flags &= ~IGB_FLAG_HAS_MSI;
1257 err = request_irq(adapter->pdev->irq, igb_intr, IRQF_SHARED,
1258 netdev->name, adapter);
1260 if (err)
1261 dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
1262 err);
1264 request_done:
1265 return err;
1268 static void igb_free_irq(struct igb_adapter *adapter)
1270 if (adapter->msix_entries) {
1271 int vector = 0, i;
1273 free_irq(adapter->msix_entries[vector++].vector, adapter);
1275 for (i = 0; i < adapter->num_q_vectors; i++) {
1276 struct igb_q_vector *q_vector = adapter->q_vector[i];
1277 free_irq(adapter->msix_entries[vector++].vector,
1278 q_vector);
1280 } else {
1281 free_irq(adapter->pdev->irq, adapter);
1286 * igb_irq_disable - Mask off interrupt generation on the NIC
1287 * @adapter: board private structure
1289 static void igb_irq_disable(struct igb_adapter *adapter)
1291 struct e1000_hw *hw = &adapter->hw;
1294 * we need to be careful when disabling interrupts. The VFs are also
1295 * mapped into these registers and so clearing the bits can cause
1296 * issues on the VF drivers so we only need to clear what we set
1298 if (adapter->msix_entries) {
1299 u32 regval = rd32(E1000_EIAM);
1300 wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
1301 wr32(E1000_EIMC, adapter->eims_enable_mask);
1302 regval = rd32(E1000_EIAC);
1303 wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
1306 wr32(E1000_IAM, 0);
1307 wr32(E1000_IMC, ~0);
1308 wrfl();
1309 if (adapter->msix_entries) {
1310 int i;
1311 for (i = 0; i < adapter->num_q_vectors; i++)
1312 synchronize_irq(adapter->msix_entries[i].vector);
1313 } else {
1314 synchronize_irq(adapter->pdev->irq);
1319 * igb_irq_enable - Enable default interrupt generation settings
1320 * @adapter: board private structure
1322 static void igb_irq_enable(struct igb_adapter *adapter)
1324 struct e1000_hw *hw = &adapter->hw;
1326 if (adapter->msix_entries) {
1327 u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC;
1328 u32 regval = rd32(E1000_EIAC);
1329 wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
1330 regval = rd32(E1000_EIAM);
1331 wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
1332 wr32(E1000_EIMS, adapter->eims_enable_mask);
1333 if (adapter->vfs_allocated_count) {
1334 wr32(E1000_MBVFIMR, 0xFF);
1335 ims |= E1000_IMS_VMMB;
1337 if (adapter->hw.mac.type == e1000_82580)
1338 ims |= E1000_IMS_DRSTA;
1340 wr32(E1000_IMS, ims);
1341 } else {
1342 wr32(E1000_IMS, IMS_ENABLE_MASK |
1343 E1000_IMS_DRSTA);
1344 wr32(E1000_IAM, IMS_ENABLE_MASK |
1345 E1000_IMS_DRSTA);
1349 static void igb_update_mng_vlan(struct igb_adapter *adapter)
1351 struct e1000_hw *hw = &adapter->hw;
1352 u16 vid = adapter->hw.mng_cookie.vlan_id;
1353 u16 old_vid = adapter->mng_vlan_id;
1355 if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
1356 /* add VID to filter table */
1357 igb_vfta_set(hw, vid, true);
1358 adapter->mng_vlan_id = vid;
1359 } else {
1360 adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
1363 if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
1364 (vid != old_vid) &&
1365 !vlan_group_get_device(adapter->vlgrp, old_vid)) {
1366 /* remove VID from filter table */
1367 igb_vfta_set(hw, old_vid, false);
1372 * igb_release_hw_control - release control of the h/w to f/w
1373 * @adapter: address of board private structure
1375 * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
1376 * For ASF and Pass Through versions of f/w this means that the
1377 * driver is no longer loaded.
1380 static void igb_release_hw_control(struct igb_adapter *adapter)
1382 struct e1000_hw *hw = &adapter->hw;
1383 u32 ctrl_ext;
1385 /* Let firmware take over control of h/w */
1386 ctrl_ext = rd32(E1000_CTRL_EXT);
1387 wr32(E1000_CTRL_EXT,
1388 ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
1392 * igb_get_hw_control - get control of the h/w from f/w
1393 * @adapter: address of board private structure
1395 * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
1396 * For ASF and Pass Through versions of f/w this means that
1397 * the driver is loaded.
1400 static void igb_get_hw_control(struct igb_adapter *adapter)
1402 struct e1000_hw *hw = &adapter->hw;
1403 u32 ctrl_ext;
1405 /* Let firmware know the driver has taken over */
1406 ctrl_ext = rd32(E1000_CTRL_EXT);
1407 wr32(E1000_CTRL_EXT,
1408 ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
1412 * igb_configure - configure the hardware for RX and TX
1413 * @adapter: private board structure
1415 static void igb_configure(struct igb_adapter *adapter)
1417 struct net_device *netdev = adapter->netdev;
1418 int i;
1420 igb_get_hw_control(adapter);
1421 igb_set_rx_mode(netdev);
1423 igb_restore_vlan(adapter);
1425 igb_setup_tctl(adapter);
1426 igb_setup_mrqc(adapter);
1427 igb_setup_rctl(adapter);
1429 igb_configure_tx(adapter);
1430 igb_configure_rx(adapter);
1432 igb_rx_fifo_flush_82575(&adapter->hw);
1434 /* call igb_desc_unused which always leaves
1435 * at least 1 descriptor unused to make sure
1436 * next_to_use != next_to_clean */
1437 for (i = 0; i < adapter->num_rx_queues; i++) {
1438 struct igb_ring *ring = adapter->rx_ring[i];
1439 igb_alloc_rx_buffers_adv(ring, igb_desc_unused(ring));
1444 * igb_power_up_link - Power up the phy/serdes link
1445 * @adapter: address of board private structure
1447 void igb_power_up_link(struct igb_adapter *adapter)
1449 if (adapter->hw.phy.media_type == e1000_media_type_copper)
1450 igb_power_up_phy_copper(&adapter->hw);
1451 else
1452 igb_power_up_serdes_link_82575(&adapter->hw);
1456 * igb_power_down_link - Power down the phy/serdes link
1457 * @adapter: address of board private structure
1459 static void igb_power_down_link(struct igb_adapter *adapter)
1461 if (adapter->hw.phy.media_type == e1000_media_type_copper)
1462 igb_power_down_phy_copper_82575(&adapter->hw);
1463 else
1464 igb_shutdown_serdes_link_82575(&adapter->hw);
1468 * igb_up - Open the interface and prepare it to handle traffic
1469 * @adapter: board private structure
1471 int igb_up(struct igb_adapter *adapter)
1473 struct e1000_hw *hw = &adapter->hw;
1474 int i;
1476 /* hardware has been reset, we need to reload some things */
1477 igb_configure(adapter);
1479 clear_bit(__IGB_DOWN, &adapter->state);
1481 for (i = 0; i < adapter->num_q_vectors; i++) {
1482 struct igb_q_vector *q_vector = adapter->q_vector[i];
1483 napi_enable(&q_vector->napi);
1485 if (adapter->msix_entries)
1486 igb_configure_msix(adapter);
1487 else
1488 igb_assign_vector(adapter->q_vector[0], 0);
1490 /* Clear any pending interrupts. */
1491 rd32(E1000_ICR);
1492 igb_irq_enable(adapter);
1494 /* notify VFs that reset has been completed */
1495 if (adapter->vfs_allocated_count) {
1496 u32 reg_data = rd32(E1000_CTRL_EXT);
1497 reg_data |= E1000_CTRL_EXT_PFRSTD;
1498 wr32(E1000_CTRL_EXT, reg_data);
1501 netif_tx_start_all_queues(adapter->netdev);
1503 /* start the watchdog. */
1504 hw->mac.get_link_status = 1;
1505 schedule_work(&adapter->watchdog_task);
1507 return 0;
1510 void igb_down(struct igb_adapter *adapter)
1512 struct net_device *netdev = adapter->netdev;
1513 struct e1000_hw *hw = &adapter->hw;
1514 u32 tctl, rctl;
1515 int i;
1517 /* signal that we're down so the interrupt handler does not
1518 * reschedule our watchdog timer */
1519 set_bit(__IGB_DOWN, &adapter->state);
1521 /* disable receives in the hardware */
1522 rctl = rd32(E1000_RCTL);
1523 wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
1524 /* flush and sleep below */
1526 netif_tx_stop_all_queues(netdev);
1528 /* disable transmits in the hardware */
1529 tctl = rd32(E1000_TCTL);
1530 tctl &= ~E1000_TCTL_EN;
1531 wr32(E1000_TCTL, tctl);
1532 /* flush both disables and wait for them to finish */
1533 wrfl();
1534 msleep(10);
1536 for (i = 0; i < adapter->num_q_vectors; i++) {
1537 struct igb_q_vector *q_vector = adapter->q_vector[i];
1538 napi_disable(&q_vector->napi);
1541 igb_irq_disable(adapter);
1543 del_timer_sync(&adapter->watchdog_timer);
1544 del_timer_sync(&adapter->phy_info_timer);
1546 netif_carrier_off(netdev);
1548 /* record the stats before reset*/
1549 spin_lock(&adapter->stats64_lock);
1550 igb_update_stats(adapter, &adapter->stats64);
1551 spin_unlock(&adapter->stats64_lock);
1553 adapter->link_speed = 0;
1554 adapter->link_duplex = 0;
1556 if (!pci_channel_offline(adapter->pdev))
1557 igb_reset(adapter);
1558 igb_clean_all_tx_rings(adapter);
1559 igb_clean_all_rx_rings(adapter);
1560 #ifdef CONFIG_IGB_DCA
1562 /* since we reset the hardware DCA settings were cleared */
1563 igb_setup_dca(adapter);
1564 #endif
1567 void igb_reinit_locked(struct igb_adapter *adapter)
1569 WARN_ON(in_interrupt());
1570 while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
1571 msleep(1);
1572 igb_down(adapter);
1573 igb_up(adapter);
1574 clear_bit(__IGB_RESETTING, &adapter->state);
1577 void igb_reset(struct igb_adapter *adapter)
1579 struct pci_dev *pdev = adapter->pdev;
1580 struct e1000_hw *hw = &adapter->hw;
1581 struct e1000_mac_info *mac = &hw->mac;
1582 struct e1000_fc_info *fc = &hw->fc;
1583 u32 pba = 0, tx_space, min_tx_space, min_rx_space;
1584 u16 hwm;
1586 /* Repartition Pba for greater than 9k mtu
1587 * To take effect CTRL.RST is required.
1589 switch (mac->type) {
1590 case e1000_i350:
1591 case e1000_82580:
1592 pba = rd32(E1000_RXPBS);
1593 pba = igb_rxpbs_adjust_82580(pba);
1594 break;
1595 case e1000_82576:
1596 pba = rd32(E1000_RXPBS);
1597 pba &= E1000_RXPBS_SIZE_MASK_82576;
1598 break;
1599 case e1000_82575:
1600 default:
1601 pba = E1000_PBA_34K;
1602 break;
1605 if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) &&
1606 (mac->type < e1000_82576)) {
1607 /* adjust PBA for jumbo frames */
1608 wr32(E1000_PBA, pba);
1610 /* To maintain wire speed transmits, the Tx FIFO should be
1611 * large enough to accommodate two full transmit packets,
1612 * rounded up to the next 1KB and expressed in KB. Likewise,
1613 * the Rx FIFO should be large enough to accommodate at least
1614 * one full receive packet and is similarly rounded up and
1615 * expressed in KB. */
1616 pba = rd32(E1000_PBA);
1617 /* upper 16 bits has Tx packet buffer allocation size in KB */
1618 tx_space = pba >> 16;
1619 /* lower 16 bits has Rx packet buffer allocation size in KB */
1620 pba &= 0xffff;
1621 /* the tx fifo also stores 16 bytes of information about the tx
1622 * but don't include ethernet FCS because hardware appends it */
1623 min_tx_space = (adapter->max_frame_size +
1624 sizeof(union e1000_adv_tx_desc) -
1625 ETH_FCS_LEN) * 2;
1626 min_tx_space = ALIGN(min_tx_space, 1024);
1627 min_tx_space >>= 10;
1628 /* software strips receive CRC, so leave room for it */
1629 min_rx_space = adapter->max_frame_size;
1630 min_rx_space = ALIGN(min_rx_space, 1024);
1631 min_rx_space >>= 10;
1633 /* If current Tx allocation is less than the min Tx FIFO size,
1634 * and the min Tx FIFO size is less than the current Rx FIFO
1635 * allocation, take space away from current Rx allocation */
1636 if (tx_space < min_tx_space &&
1637 ((min_tx_space - tx_space) < pba)) {
1638 pba = pba - (min_tx_space - tx_space);
1640 /* if short on rx space, rx wins and must trump tx
1641 * adjustment */
1642 if (pba < min_rx_space)
1643 pba = min_rx_space;
1645 wr32(E1000_PBA, pba);
1648 /* flow control settings */
1649 /* The high water mark must be low enough to fit one full frame
1650 * (or the size used for early receive) above it in the Rx FIFO.
1651 * Set it to the lower of:
1652 * - 90% of the Rx FIFO size, or
1653 * - the full Rx FIFO size minus one full frame */
1654 hwm = min(((pba << 10) * 9 / 10),
1655 ((pba << 10) - 2 * adapter->max_frame_size));
1657 fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */
1658 fc->low_water = fc->high_water - 16;
1659 fc->pause_time = 0xFFFF;
1660 fc->send_xon = 1;
1661 fc->current_mode = fc->requested_mode;
1663 /* disable receive for all VFs and wait one second */
1664 if (adapter->vfs_allocated_count) {
1665 int i;
1666 for (i = 0 ; i < adapter->vfs_allocated_count; i++)
1667 adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
1669 /* ping all the active vfs to let them know we are going down */
1670 igb_ping_all_vfs(adapter);
1672 /* disable transmits and receives */
1673 wr32(E1000_VFRE, 0);
1674 wr32(E1000_VFTE, 0);
1677 /* Allow time for pending master requests to run */
1678 hw->mac.ops.reset_hw(hw);
1679 wr32(E1000_WUC, 0);
1681 if (hw->mac.ops.init_hw(hw))
1682 dev_err(&pdev->dev, "Hardware Error\n");
1683 if (hw->mac.type > e1000_82580) {
1684 if (adapter->flags & IGB_FLAG_DMAC) {
1685 u32 reg;
1688 * DMA Coalescing high water mark needs to be higher
1689 * than * the * Rx threshold. The Rx threshold is
1690 * currently * pba - 6, so we * should use a high water
1691 * mark of pba * - 4. */
1692 hwm = (pba - 4) << 10;
1694 reg = (((pba-6) << E1000_DMACR_DMACTHR_SHIFT)
1695 & E1000_DMACR_DMACTHR_MASK);
1697 /* transition to L0x or L1 if available..*/
1698 reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
1700 /* watchdog timer= +-1000 usec in 32usec intervals */
1701 reg |= (1000 >> 5);
1702 wr32(E1000_DMACR, reg);
1704 /* no lower threshold to disable coalescing(smart fifb)
1705 * -UTRESH=0*/
1706 wr32(E1000_DMCRTRH, 0);
1708 /* set hwm to PBA - 2 * max frame size */
1709 wr32(E1000_FCRTC, hwm);
1712 * This sets the time to wait before requesting tran-
1713 * sition to * low power state to number of usecs needed
1714 * to receive 1 512 * byte frame at gigabit line rate
1716 reg = rd32(E1000_DMCTLX);
1717 reg |= IGB_DMCTLX_DCFLUSH_DIS;
1719 /* Delay 255 usec before entering Lx state. */
1720 reg |= 0xFF;
1721 wr32(E1000_DMCTLX, reg);
1723 /* free space in Tx packet buffer to wake from DMAC */
1724 wr32(E1000_DMCTXTH,
1725 (IGB_MIN_TXPBSIZE -
1726 (IGB_TX_BUF_4096 + adapter->max_frame_size))
1727 >> 6);
1729 /* make low power state decision controlled by DMAC */
1730 reg = rd32(E1000_PCIEMISC);
1731 reg |= E1000_PCIEMISC_LX_DECISION;
1732 wr32(E1000_PCIEMISC, reg);
1733 } /* end if IGB_FLAG_DMAC set */
1735 if (hw->mac.type == e1000_82580) {
1736 u32 reg = rd32(E1000_PCIEMISC);
1737 wr32(E1000_PCIEMISC,
1738 reg & ~E1000_PCIEMISC_LX_DECISION);
1740 if (!netif_running(adapter->netdev))
1741 igb_power_down_link(adapter);
1743 igb_update_mng_vlan(adapter);
1745 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
1746 wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
1748 igb_get_phy_info(hw);
1751 static const struct net_device_ops igb_netdev_ops = {
1752 .ndo_open = igb_open,
1753 .ndo_stop = igb_close,
1754 .ndo_start_xmit = igb_xmit_frame_adv,
1755 .ndo_get_stats64 = igb_get_stats64,
1756 .ndo_set_rx_mode = igb_set_rx_mode,
1757 .ndo_set_multicast_list = igb_set_rx_mode,
1758 .ndo_set_mac_address = igb_set_mac,
1759 .ndo_change_mtu = igb_change_mtu,
1760 .ndo_do_ioctl = igb_ioctl,
1761 .ndo_tx_timeout = igb_tx_timeout,
1762 .ndo_validate_addr = eth_validate_addr,
1763 .ndo_vlan_rx_register = igb_vlan_rx_register,
1764 .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid,
1765 .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid,
1766 .ndo_set_vf_mac = igb_ndo_set_vf_mac,
1767 .ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
1768 .ndo_set_vf_tx_rate = igb_ndo_set_vf_bw,
1769 .ndo_get_vf_config = igb_ndo_get_vf_config,
1770 #ifdef CONFIG_NET_POLL_CONTROLLER
1771 .ndo_poll_controller = igb_netpoll,
1772 #endif
1776 * igb_probe - Device Initialization Routine
1777 * @pdev: PCI device information struct
1778 * @ent: entry in igb_pci_tbl
1780 * Returns 0 on success, negative on failure
1782 * igb_probe initializes an adapter identified by a pci_dev structure.
1783 * The OS initialization, configuring of the adapter private structure,
1784 * and a hardware reset occur.
1786 static int __devinit igb_probe(struct pci_dev *pdev,
1787 const struct pci_device_id *ent)
1789 struct net_device *netdev;
1790 struct igb_adapter *adapter;
1791 struct e1000_hw *hw;
1792 u16 eeprom_data = 0;
1793 s32 ret_val;
1794 static int global_quad_port_a; /* global quad port a indication */
1795 const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
1796 unsigned long mmio_start, mmio_len;
1797 int err, pci_using_dac;
1798 u16 eeprom_apme_mask = IGB_EEPROM_APME;
1799 u8 part_str[E1000_PBANUM_LENGTH];
1801 /* Catch broken hardware that put the wrong VF device ID in
1802 * the PCIe SR-IOV capability.
1804 if (pdev->is_virtfn) {
1805 WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
1806 pci_name(pdev), pdev->vendor, pdev->device);
1807 return -EINVAL;
1810 err = pci_enable_device_mem(pdev);
1811 if (err)
1812 return err;
1814 pci_using_dac = 0;
1815 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
1816 if (!err) {
1817 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
1818 if (!err)
1819 pci_using_dac = 1;
1820 } else {
1821 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
1822 if (err) {
1823 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
1824 if (err) {
1825 dev_err(&pdev->dev, "No usable DMA "
1826 "configuration, aborting\n");
1827 goto err_dma;
1832 err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
1833 IORESOURCE_MEM),
1834 igb_driver_name);
1835 if (err)
1836 goto err_pci_reg;
1838 pci_enable_pcie_error_reporting(pdev);
1840 pci_set_master(pdev);
1841 pci_save_state(pdev);
1843 err = -ENOMEM;
1844 netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
1845 IGB_ABS_MAX_TX_QUEUES);
1846 if (!netdev)
1847 goto err_alloc_etherdev;
1849 SET_NETDEV_DEV(netdev, &pdev->dev);
1851 pci_set_drvdata(pdev, netdev);
1852 adapter = netdev_priv(netdev);
1853 adapter->netdev = netdev;
1854 adapter->pdev = pdev;
1855 hw = &adapter->hw;
1856 hw->back = adapter;
1857 adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE;
1859 mmio_start = pci_resource_start(pdev, 0);
1860 mmio_len = pci_resource_len(pdev, 0);
1862 err = -EIO;
1863 hw->hw_addr = ioremap(mmio_start, mmio_len);
1864 if (!hw->hw_addr)
1865 goto err_ioremap;
1867 netdev->netdev_ops = &igb_netdev_ops;
1868 igb_set_ethtool_ops(netdev);
1869 netdev->watchdog_timeo = 5 * HZ;
1871 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
1873 netdev->mem_start = mmio_start;
1874 netdev->mem_end = mmio_start + mmio_len;
1876 /* PCI config space info */
1877 hw->vendor_id = pdev->vendor;
1878 hw->device_id = pdev->device;
1879 hw->revision_id = pdev->revision;
1880 hw->subsystem_vendor_id = pdev->subsystem_vendor;
1881 hw->subsystem_device_id = pdev->subsystem_device;
1883 /* Copy the default MAC, PHY and NVM function pointers */
1884 memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
1885 memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
1886 memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
1887 /* Initialize skew-specific constants */
1888 err = ei->get_invariants(hw);
1889 if (err)
1890 goto err_sw_init;
1892 /* setup the private structure */
1893 err = igb_sw_init(adapter);
1894 if (err)
1895 goto err_sw_init;
1897 igb_get_bus_info_pcie(hw);
1899 hw->phy.autoneg_wait_to_complete = false;
1901 /* Copper options */
1902 if (hw->phy.media_type == e1000_media_type_copper) {
1903 hw->phy.mdix = AUTO_ALL_MODES;
1904 hw->phy.disable_polarity_correction = false;
1905 hw->phy.ms_type = e1000_ms_hw_default;
1908 if (igb_check_reset_block(hw))
1909 dev_info(&pdev->dev,
1910 "PHY reset is blocked due to SOL/IDER session.\n");
1912 netdev->features = NETIF_F_SG |
1913 NETIF_F_IP_CSUM |
1914 NETIF_F_HW_VLAN_TX |
1915 NETIF_F_HW_VLAN_RX |
1916 NETIF_F_HW_VLAN_FILTER;
1918 netdev->features |= NETIF_F_IPV6_CSUM;
1919 netdev->features |= NETIF_F_TSO;
1920 netdev->features |= NETIF_F_TSO6;
1921 netdev->features |= NETIF_F_GRO;
1923 netdev->vlan_features |= NETIF_F_TSO;
1924 netdev->vlan_features |= NETIF_F_TSO6;
1925 netdev->vlan_features |= NETIF_F_IP_CSUM;
1926 netdev->vlan_features |= NETIF_F_IPV6_CSUM;
1927 netdev->vlan_features |= NETIF_F_SG;
1929 if (pci_using_dac) {
1930 netdev->features |= NETIF_F_HIGHDMA;
1931 netdev->vlan_features |= NETIF_F_HIGHDMA;
1934 if (hw->mac.type >= e1000_82576)
1935 netdev->features |= NETIF_F_SCTP_CSUM;
1937 adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
1939 /* before reading the NVM, reset the controller to put the device in a
1940 * known good starting state */
1941 hw->mac.ops.reset_hw(hw);
1943 /* make sure the NVM is good */
1944 if (hw->nvm.ops.validate(hw) < 0) {
1945 dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
1946 err = -EIO;
1947 goto err_eeprom;
1950 /* copy the MAC address out of the NVM */
1951 if (hw->mac.ops.read_mac_addr(hw))
1952 dev_err(&pdev->dev, "NVM Read Error\n");
1954 memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
1955 memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len);
1957 if (!is_valid_ether_addr(netdev->perm_addr)) {
1958 dev_err(&pdev->dev, "Invalid MAC Address\n");
1959 err = -EIO;
1960 goto err_eeprom;
1963 setup_timer(&adapter->watchdog_timer, igb_watchdog,
1964 (unsigned long) adapter);
1965 setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
1966 (unsigned long) adapter);
1968 INIT_WORK(&adapter->reset_task, igb_reset_task);
1969 INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
1971 /* Initialize link properties that are user-changeable */
1972 adapter->fc_autoneg = true;
1973 hw->mac.autoneg = true;
1974 hw->phy.autoneg_advertised = 0x2f;
1976 hw->fc.requested_mode = e1000_fc_default;
1977 hw->fc.current_mode = e1000_fc_default;
1979 igb_validate_mdi_setting(hw);
1981 /* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
1982 * enable the ACPI Magic Packet filter
1985 if (hw->bus.func == 0)
1986 hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
1987 else if (hw->mac.type == e1000_82580)
1988 hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
1989 NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
1990 &eeprom_data);
1991 else if (hw->bus.func == 1)
1992 hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
1994 if (eeprom_data & eeprom_apme_mask)
1995 adapter->eeprom_wol |= E1000_WUFC_MAG;
1997 /* now that we have the eeprom settings, apply the special cases where
1998 * the eeprom may be wrong or the board simply won't support wake on
1999 * lan on a particular port */
2000 switch (pdev->device) {
2001 case E1000_DEV_ID_82575GB_QUAD_COPPER:
2002 adapter->eeprom_wol = 0;
2003 break;
2004 case E1000_DEV_ID_82575EB_FIBER_SERDES:
2005 case E1000_DEV_ID_82576_FIBER:
2006 case E1000_DEV_ID_82576_SERDES:
2007 /* Wake events only supported on port A for dual fiber
2008 * regardless of eeprom setting */
2009 if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
2010 adapter->eeprom_wol = 0;
2011 break;
2012 case E1000_DEV_ID_82576_QUAD_COPPER:
2013 case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
2014 /* if quad port adapter, disable WoL on all but port A */
2015 if (global_quad_port_a != 0)
2016 adapter->eeprom_wol = 0;
2017 else
2018 adapter->flags |= IGB_FLAG_QUAD_PORT_A;
2019 /* Reset for multiple quad port adapters */
2020 if (++global_quad_port_a == 4)
2021 global_quad_port_a = 0;
2022 break;
2025 /* initialize the wol settings based on the eeprom settings */
2026 adapter->wol = adapter->eeprom_wol;
2027 device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
2029 /* reset the hardware with the new settings */
2030 igb_reset(adapter);
2032 /* let the f/w know that the h/w is now under the control of the
2033 * driver. */
2034 igb_get_hw_control(adapter);
2036 strcpy(netdev->name, "eth%d");
2037 err = register_netdev(netdev);
2038 if (err)
2039 goto err_register;
2041 /* carrier off reporting is important to ethtool even BEFORE open */
2042 netif_carrier_off(netdev);
2044 #ifdef CONFIG_IGB_DCA
2045 if (dca_add_requester(&pdev->dev) == 0) {
2046 adapter->flags |= IGB_FLAG_DCA_ENABLED;
2047 dev_info(&pdev->dev, "DCA enabled\n");
2048 igb_setup_dca(adapter);
2051 #endif
2052 /* do hw tstamp init after resetting */
2053 igb_init_hw_timer(adapter);
2055 dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
2056 /* print bus type/speed/width info */
2057 dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
2058 netdev->name,
2059 ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
2060 (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
2061 "unknown"),
2062 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
2063 (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" :
2064 (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" :
2065 "unknown"),
2066 netdev->dev_addr);
2068 ret_val = igb_read_part_string(hw, part_str, E1000_PBANUM_LENGTH);
2069 if (ret_val)
2070 strcpy(part_str, "Unknown");
2071 dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
2072 dev_info(&pdev->dev,
2073 "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
2074 adapter->msix_entries ? "MSI-X" :
2075 (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
2076 adapter->num_rx_queues, adapter->num_tx_queues);
2077 switch (hw->mac.type) {
2078 case e1000_i350:
2079 igb_set_eee_i350(hw);
2080 break;
2081 default:
2082 break;
2084 return 0;
2086 err_register:
2087 igb_release_hw_control(adapter);
2088 err_eeprom:
2089 if (!igb_check_reset_block(hw))
2090 igb_reset_phy(hw);
2092 if (hw->flash_address)
2093 iounmap(hw->flash_address);
2094 err_sw_init:
2095 igb_clear_interrupt_scheme(adapter);
2096 iounmap(hw->hw_addr);
2097 err_ioremap:
2098 free_netdev(netdev);
2099 err_alloc_etherdev:
2100 pci_release_selected_regions(pdev,
2101 pci_select_bars(pdev, IORESOURCE_MEM));
2102 err_pci_reg:
2103 err_dma:
2104 pci_disable_device(pdev);
2105 return err;
2109 * igb_remove - Device Removal Routine
2110 * @pdev: PCI device information struct
2112 * igb_remove is called by the PCI subsystem to alert the driver
2113 * that it should release a PCI device. The could be caused by a
2114 * Hot-Plug event, or because the driver is going to be removed from
2115 * memory.
2117 static void __devexit igb_remove(struct pci_dev *pdev)
2119 struct net_device *netdev = pci_get_drvdata(pdev);
2120 struct igb_adapter *adapter = netdev_priv(netdev);
2121 struct e1000_hw *hw = &adapter->hw;
2124 * The watchdog timer may be rescheduled, so explicitly
2125 * disable watchdog from being rescheduled.
2127 set_bit(__IGB_DOWN, &adapter->state);
2128 del_timer_sync(&adapter->watchdog_timer);
2129 del_timer_sync(&adapter->phy_info_timer);
2131 cancel_work_sync(&adapter->reset_task);
2132 cancel_work_sync(&adapter->watchdog_task);
2134 #ifdef CONFIG_IGB_DCA
2135 if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
2136 dev_info(&pdev->dev, "DCA disabled\n");
2137 dca_remove_requester(&pdev->dev);
2138 adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
2139 wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
2141 #endif
2143 /* Release control of h/w to f/w. If f/w is AMT enabled, this
2144 * would have already happened in close and is redundant. */
2145 igb_release_hw_control(adapter);
2147 unregister_netdev(netdev);
2149 igb_clear_interrupt_scheme(adapter);
2151 #ifdef CONFIG_PCI_IOV
2152 /* reclaim resources allocated to VFs */
2153 if (adapter->vf_data) {
2154 /* disable iov and allow time for transactions to clear */
2155 pci_disable_sriov(pdev);
2156 msleep(500);
2158 kfree(adapter->vf_data);
2159 adapter->vf_data = NULL;
2160 wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
2161 msleep(100);
2162 dev_info(&pdev->dev, "IOV Disabled\n");
2164 #endif
2166 iounmap(hw->hw_addr);
2167 if (hw->flash_address)
2168 iounmap(hw->flash_address);
2169 pci_release_selected_regions(pdev,
2170 pci_select_bars(pdev, IORESOURCE_MEM));
2172 free_netdev(netdev);
2174 pci_disable_pcie_error_reporting(pdev);
2176 pci_disable_device(pdev);
2180 * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
2181 * @adapter: board private structure to initialize
2183 * This function initializes the vf specific data storage and then attempts to
2184 * allocate the VFs. The reason for ordering it this way is because it is much
2185 * mor expensive time wise to disable SR-IOV than it is to allocate and free
2186 * the memory for the VFs.
2188 static void __devinit igb_probe_vfs(struct igb_adapter * adapter)
2190 #ifdef CONFIG_PCI_IOV
2191 struct pci_dev *pdev = adapter->pdev;
2193 if (adapter->vfs_allocated_count) {
2194 adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
2195 sizeof(struct vf_data_storage),
2196 GFP_KERNEL);
2197 /* if allocation failed then we do not support SR-IOV */
2198 if (!adapter->vf_data) {
2199 adapter->vfs_allocated_count = 0;
2200 dev_err(&pdev->dev, "Unable to allocate memory for VF "
2201 "Data Storage\n");
2205 if (pci_enable_sriov(pdev, adapter->vfs_allocated_count)) {
2206 kfree(adapter->vf_data);
2207 adapter->vf_data = NULL;
2208 #endif /* CONFIG_PCI_IOV */
2209 adapter->vfs_allocated_count = 0;
2210 #ifdef CONFIG_PCI_IOV
2211 } else {
2212 unsigned char mac_addr[ETH_ALEN];
2213 int i;
2214 dev_info(&pdev->dev, "%d vfs allocated\n",
2215 adapter->vfs_allocated_count);
2216 for (i = 0; i < adapter->vfs_allocated_count; i++) {
2217 random_ether_addr(mac_addr);
2218 igb_set_vf_mac(adapter, i, mac_addr);
2220 /* DMA Coalescing is not supported in IOV mode. */
2221 if (adapter->flags & IGB_FLAG_DMAC)
2222 adapter->flags &= ~IGB_FLAG_DMAC;
2224 #endif /* CONFIG_PCI_IOV */
2229 * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp
2230 * @adapter: board private structure to initialize
2232 * igb_init_hw_timer initializes the function pointer and values for the hw
2233 * timer found in hardware.
2235 static void igb_init_hw_timer(struct igb_adapter *adapter)
2237 struct e1000_hw *hw = &adapter->hw;
2239 switch (hw->mac.type) {
2240 case e1000_i350:
2241 case e1000_82580:
2242 memset(&adapter->cycles, 0, sizeof(adapter->cycles));
2243 adapter->cycles.read = igb_read_clock;
2244 adapter->cycles.mask = CLOCKSOURCE_MASK(64);
2245 adapter->cycles.mult = 1;
2247 * The 82580 timesync updates the system timer every 8ns by 8ns
2248 * and the value cannot be shifted. Instead we need to shift
2249 * the registers to generate a 64bit timer value. As a result
2250 * SYSTIMR/L/H, TXSTMPL/H, RXSTMPL/H all have to be shifted by
2251 * 24 in order to generate a larger value for synchronization.
2253 adapter->cycles.shift = IGB_82580_TSYNC_SHIFT;
2254 /* disable system timer temporarily by setting bit 31 */
2255 wr32(E1000_TSAUXC, 0x80000000);
2256 wrfl();
2258 /* Set registers so that rollover occurs soon to test this. */
2259 wr32(E1000_SYSTIMR, 0x00000000);
2260 wr32(E1000_SYSTIML, 0x80000000);
2261 wr32(E1000_SYSTIMH, 0x000000FF);
2262 wrfl();
2264 /* enable system timer by clearing bit 31 */
2265 wr32(E1000_TSAUXC, 0x0);
2266 wrfl();
2268 timecounter_init(&adapter->clock,
2269 &adapter->cycles,
2270 ktime_to_ns(ktime_get_real()));
2272 * Synchronize our NIC clock against system wall clock. NIC
2273 * time stamp reading requires ~3us per sample, each sample
2274 * was pretty stable even under load => only require 10
2275 * samples for each offset comparison.
2277 memset(&adapter->compare, 0, sizeof(adapter->compare));
2278 adapter->compare.source = &adapter->clock;
2279 adapter->compare.target = ktime_get_real;
2280 adapter->compare.num_samples = 10;
2281 timecompare_update(&adapter->compare, 0);
2282 break;
2283 case e1000_82576:
2285 * Initialize hardware timer: we keep it running just in case
2286 * that some program needs it later on.
2288 memset(&adapter->cycles, 0, sizeof(adapter->cycles));
2289 adapter->cycles.read = igb_read_clock;
2290 adapter->cycles.mask = CLOCKSOURCE_MASK(64);
2291 adapter->cycles.mult = 1;
2293 * Scale the NIC clock cycle by a large factor so that
2294 * relatively small clock corrections can be added or
2295 * subtracted at each clock tick. The drawbacks of a large
2296 * factor are a) that the clock register overflows more quickly
2297 * (not such a big deal) and b) that the increment per tick has
2298 * to fit into 24 bits. As a result we need to use a shift of
2299 * 19 so we can fit a value of 16 into the TIMINCA register.
2301 adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
2302 wr32(E1000_TIMINCA,
2303 (1 << E1000_TIMINCA_16NS_SHIFT) |
2304 (16 << IGB_82576_TSYNC_SHIFT));
2306 /* Set registers so that rollover occurs soon to test this. */
2307 wr32(E1000_SYSTIML, 0x00000000);
2308 wr32(E1000_SYSTIMH, 0xFF800000);
2309 wrfl();
2311 timecounter_init(&adapter->clock,
2312 &adapter->cycles,
2313 ktime_to_ns(ktime_get_real()));
2315 * Synchronize our NIC clock against system wall clock. NIC
2316 * time stamp reading requires ~3us per sample, each sample
2317 * was pretty stable even under load => only require 10
2318 * samples for each offset comparison.
2320 memset(&adapter->compare, 0, sizeof(adapter->compare));
2321 adapter->compare.source = &adapter->clock;
2322 adapter->compare.target = ktime_get_real;
2323 adapter->compare.num_samples = 10;
2324 timecompare_update(&adapter->compare, 0);
2325 break;
2326 case e1000_82575:
2327 /* 82575 does not support timesync */
2328 default:
2329 break;
2335 * igb_sw_init - Initialize general software structures (struct igb_adapter)
2336 * @adapter: board private structure to initialize
2338 * igb_sw_init initializes the Adapter private data structure.
2339 * Fields are initialized based on PCI device information and
2340 * OS network device settings (MTU size).
2342 static int __devinit igb_sw_init(struct igb_adapter *adapter)
2344 struct e1000_hw *hw = &adapter->hw;
2345 struct net_device *netdev = adapter->netdev;
2346 struct pci_dev *pdev = adapter->pdev;
2348 pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
2350 adapter->tx_ring_count = IGB_DEFAULT_TXD;
2351 adapter->rx_ring_count = IGB_DEFAULT_RXD;
2352 adapter->rx_itr_setting = IGB_DEFAULT_ITR;
2353 adapter->tx_itr_setting = IGB_DEFAULT_ITR;
2355 adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
2356 adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
2358 spin_lock_init(&adapter->stats64_lock);
2359 #ifdef CONFIG_PCI_IOV
2360 switch (hw->mac.type) {
2361 case e1000_82576:
2362 case e1000_i350:
2363 if (max_vfs > 7) {
2364 dev_warn(&pdev->dev,
2365 "Maximum of 7 VFs per PF, using max\n");
2366 adapter->vfs_allocated_count = 7;
2367 } else
2368 adapter->vfs_allocated_count = max_vfs;
2369 break;
2370 default:
2371 break;
2373 #endif /* CONFIG_PCI_IOV */
2374 adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
2377 * if rss_queues > 4 or vfs are going to be allocated with rss_queues
2378 * then we should combine the queues into a queue pair in order to
2379 * conserve interrupts due to limited supply
2381 if ((adapter->rss_queues > 4) ||
2382 ((adapter->rss_queues > 1) && (adapter->vfs_allocated_count > 6)))
2383 adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
2385 /* This call may decrease the number of queues */
2386 if (igb_init_interrupt_scheme(adapter)) {
2387 dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
2388 return -ENOMEM;
2391 igb_probe_vfs(adapter);
2393 /* Explicitly disable IRQ since the NIC can be in any state. */
2394 igb_irq_disable(adapter);
2396 if (hw->mac.type == e1000_i350)
2397 adapter->flags &= ~IGB_FLAG_DMAC;
2399 set_bit(__IGB_DOWN, &adapter->state);
2400 return 0;
2404 * igb_open - Called when a network interface is made active
2405 * @netdev: network interface device structure
2407 * Returns 0 on success, negative value on failure
2409 * The open entry point is called when a network interface is made
2410 * active by the system (IFF_UP). At this point all resources needed
2411 * for transmit and receive operations are allocated, the interrupt
2412 * handler is registered with the OS, the watchdog timer is started,
2413 * and the stack is notified that the interface is ready.
2415 static int igb_open(struct net_device *netdev)
2417 struct igb_adapter *adapter = netdev_priv(netdev);
2418 struct e1000_hw *hw = &adapter->hw;
2419 int err;
2420 int i;
2422 /* disallow open during test */
2423 if (test_bit(__IGB_TESTING, &adapter->state))
2424 return -EBUSY;
2426 netif_carrier_off(netdev);
2428 /* allocate transmit descriptors */
2429 err = igb_setup_all_tx_resources(adapter);
2430 if (err)
2431 goto err_setup_tx;
2433 /* allocate receive descriptors */
2434 err = igb_setup_all_rx_resources(adapter);
2435 if (err)
2436 goto err_setup_rx;
2438 igb_power_up_link(adapter);
2440 /* before we allocate an interrupt, we must be ready to handle it.
2441 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
2442 * as soon as we call pci_request_irq, so we have to setup our
2443 * clean_rx handler before we do so. */
2444 igb_configure(adapter);
2446 err = igb_request_irq(adapter);
2447 if (err)
2448 goto err_req_irq;
2450 /* From here on the code is the same as igb_up() */
2451 clear_bit(__IGB_DOWN, &adapter->state);
2453 for (i = 0; i < adapter->num_q_vectors; i++) {
2454 struct igb_q_vector *q_vector = adapter->q_vector[i];
2455 napi_enable(&q_vector->napi);
2458 /* Clear any pending interrupts. */
2459 rd32(E1000_ICR);
2461 igb_irq_enable(adapter);
2463 /* notify VFs that reset has been completed */
2464 if (adapter->vfs_allocated_count) {
2465 u32 reg_data = rd32(E1000_CTRL_EXT);
2466 reg_data |= E1000_CTRL_EXT_PFRSTD;
2467 wr32(E1000_CTRL_EXT, reg_data);
2470 netif_tx_start_all_queues(netdev);
2472 /* start the watchdog. */
2473 hw->mac.get_link_status = 1;
2474 schedule_work(&adapter->watchdog_task);
2476 return 0;
2478 err_req_irq:
2479 igb_release_hw_control(adapter);
2480 igb_power_down_link(adapter);
2481 igb_free_all_rx_resources(adapter);
2482 err_setup_rx:
2483 igb_free_all_tx_resources(adapter);
2484 err_setup_tx:
2485 igb_reset(adapter);
2487 return err;
2491 * igb_close - Disables a network interface
2492 * @netdev: network interface device structure
2494 * Returns 0, this is not allowed to fail
2496 * The close entry point is called when an interface is de-activated
2497 * by the OS. The hardware is still under the driver's control, but
2498 * needs to be disabled. A global MAC reset is issued to stop the
2499 * hardware, and all transmit and receive resources are freed.
2501 static int igb_close(struct net_device *netdev)
2503 struct igb_adapter *adapter = netdev_priv(netdev);
2505 WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
2506 igb_down(adapter);
2508 igb_free_irq(adapter);
2510 igb_free_all_tx_resources(adapter);
2511 igb_free_all_rx_resources(adapter);
2513 return 0;
2517 * igb_setup_tx_resources - allocate Tx resources (Descriptors)
2518 * @tx_ring: tx descriptor ring (for a specific queue) to setup
2520 * Return 0 on success, negative on failure
2522 int igb_setup_tx_resources(struct igb_ring *tx_ring)
2524 struct device *dev = tx_ring->dev;
2525 int size;
2527 size = sizeof(struct igb_buffer) * tx_ring->count;
2528 tx_ring->buffer_info = vzalloc(size);
2529 if (!tx_ring->buffer_info)
2530 goto err;
2532 /* round up to nearest 4K */
2533 tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
2534 tx_ring->size = ALIGN(tx_ring->size, 4096);
2536 tx_ring->desc = dma_alloc_coherent(dev,
2537 tx_ring->size,
2538 &tx_ring->dma,
2539 GFP_KERNEL);
2541 if (!tx_ring->desc)
2542 goto err;
2544 tx_ring->next_to_use = 0;
2545 tx_ring->next_to_clean = 0;
2546 return 0;
2548 err:
2549 vfree(tx_ring->buffer_info);
2550 dev_err(dev,
2551 "Unable to allocate memory for the transmit descriptor ring\n");
2552 return -ENOMEM;
2556 * igb_setup_all_tx_resources - wrapper to allocate Tx resources
2557 * (Descriptors) for all queues
2558 * @adapter: board private structure
2560 * Return 0 on success, negative on failure
2562 static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
2564 struct pci_dev *pdev = adapter->pdev;
2565 int i, err = 0;
2567 for (i = 0; i < adapter->num_tx_queues; i++) {
2568 err = igb_setup_tx_resources(adapter->tx_ring[i]);
2569 if (err) {
2570 dev_err(&pdev->dev,
2571 "Allocation for Tx Queue %u failed\n", i);
2572 for (i--; i >= 0; i--)
2573 igb_free_tx_resources(adapter->tx_ring[i]);
2574 break;
2578 for (i = 0; i < IGB_ABS_MAX_TX_QUEUES; i++) {
2579 int r_idx = i % adapter->num_tx_queues;
2580 adapter->multi_tx_table[i] = adapter->tx_ring[r_idx];
2582 return err;
2586 * igb_setup_tctl - configure the transmit control registers
2587 * @adapter: Board private structure
2589 void igb_setup_tctl(struct igb_adapter *adapter)
2591 struct e1000_hw *hw = &adapter->hw;
2592 u32 tctl;
2594 /* disable queue 0 which is enabled by default on 82575 and 82576 */
2595 wr32(E1000_TXDCTL(0), 0);
2597 /* Program the Transmit Control Register */
2598 tctl = rd32(E1000_TCTL);
2599 tctl &= ~E1000_TCTL_CT;
2600 tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2601 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2603 igb_config_collision_dist(hw);
2605 /* Enable transmits */
2606 tctl |= E1000_TCTL_EN;
2608 wr32(E1000_TCTL, tctl);
2612 * igb_configure_tx_ring - Configure transmit ring after Reset
2613 * @adapter: board private structure
2614 * @ring: tx ring to configure
2616 * Configure a transmit ring after a reset.
2618 void igb_configure_tx_ring(struct igb_adapter *adapter,
2619 struct igb_ring *ring)
2621 struct e1000_hw *hw = &adapter->hw;
2622 u32 txdctl;
2623 u64 tdba = ring->dma;
2624 int reg_idx = ring->reg_idx;
2626 /* disable the queue */
2627 txdctl = rd32(E1000_TXDCTL(reg_idx));
2628 wr32(E1000_TXDCTL(reg_idx),
2629 txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
2630 wrfl();
2631 mdelay(10);
2633 wr32(E1000_TDLEN(reg_idx),
2634 ring->count * sizeof(union e1000_adv_tx_desc));
2635 wr32(E1000_TDBAL(reg_idx),
2636 tdba & 0x00000000ffffffffULL);
2637 wr32(E1000_TDBAH(reg_idx), tdba >> 32);
2639 ring->head = hw->hw_addr + E1000_TDH(reg_idx);
2640 ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
2641 writel(0, ring->head);
2642 writel(0, ring->tail);
2644 txdctl |= IGB_TX_PTHRESH;
2645 txdctl |= IGB_TX_HTHRESH << 8;
2646 txdctl |= IGB_TX_WTHRESH << 16;
2648 txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
2649 wr32(E1000_TXDCTL(reg_idx), txdctl);
2653 * igb_configure_tx - Configure transmit Unit after Reset
2654 * @adapter: board private structure
2656 * Configure the Tx unit of the MAC after a reset.
2658 static void igb_configure_tx(struct igb_adapter *adapter)
2660 int i;
2662 for (i = 0; i < adapter->num_tx_queues; i++)
2663 igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
2667 * igb_setup_rx_resources - allocate Rx resources (Descriptors)
2668 * @rx_ring: rx descriptor ring (for a specific queue) to setup
2670 * Returns 0 on success, negative on failure
2672 int igb_setup_rx_resources(struct igb_ring *rx_ring)
2674 struct device *dev = rx_ring->dev;
2675 int size, desc_len;
2677 size = sizeof(struct igb_buffer) * rx_ring->count;
2678 rx_ring->buffer_info = vzalloc(size);
2679 if (!rx_ring->buffer_info)
2680 goto err;
2682 desc_len = sizeof(union e1000_adv_rx_desc);
2684 /* Round up to nearest 4K */
2685 rx_ring->size = rx_ring->count * desc_len;
2686 rx_ring->size = ALIGN(rx_ring->size, 4096);
2688 rx_ring->desc = dma_alloc_coherent(dev,
2689 rx_ring->size,
2690 &rx_ring->dma,
2691 GFP_KERNEL);
2693 if (!rx_ring->desc)
2694 goto err;
2696 rx_ring->next_to_clean = 0;
2697 rx_ring->next_to_use = 0;
2699 return 0;
2701 err:
2702 vfree(rx_ring->buffer_info);
2703 rx_ring->buffer_info = NULL;
2704 dev_err(dev, "Unable to allocate memory for the receive descriptor"
2705 " ring\n");
2706 return -ENOMEM;
2710 * igb_setup_all_rx_resources - wrapper to allocate Rx resources
2711 * (Descriptors) for all queues
2712 * @adapter: board private structure
2714 * Return 0 on success, negative on failure
2716 static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
2718 struct pci_dev *pdev = adapter->pdev;
2719 int i, err = 0;
2721 for (i = 0; i < adapter->num_rx_queues; i++) {
2722 err = igb_setup_rx_resources(adapter->rx_ring[i]);
2723 if (err) {
2724 dev_err(&pdev->dev,
2725 "Allocation for Rx Queue %u failed\n", i);
2726 for (i--; i >= 0; i--)
2727 igb_free_rx_resources(adapter->rx_ring[i]);
2728 break;
2732 return err;
2736 * igb_setup_mrqc - configure the multiple receive queue control registers
2737 * @adapter: Board private structure
2739 static void igb_setup_mrqc(struct igb_adapter *adapter)
2741 struct e1000_hw *hw = &adapter->hw;
2742 u32 mrqc, rxcsum;
2743 u32 j, num_rx_queues, shift = 0, shift2 = 0;
2744 union e1000_reta {
2745 u32 dword;
2746 u8 bytes[4];
2747 } reta;
2748 static const u8 rsshash[40] = {
2749 0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, 0x41, 0x67,
2750 0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0, 0xd0, 0xca, 0x2b, 0xcb,
2751 0xae, 0x7b, 0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30,
2752 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa };
2754 /* Fill out hash function seeds */
2755 for (j = 0; j < 10; j++) {
2756 u32 rsskey = rsshash[(j * 4)];
2757 rsskey |= rsshash[(j * 4) + 1] << 8;
2758 rsskey |= rsshash[(j * 4) + 2] << 16;
2759 rsskey |= rsshash[(j * 4) + 3] << 24;
2760 array_wr32(E1000_RSSRK(0), j, rsskey);
2763 num_rx_queues = adapter->rss_queues;
2765 if (adapter->vfs_allocated_count) {
2766 /* 82575 and 82576 supports 2 RSS queues for VMDq */
2767 switch (hw->mac.type) {
2768 case e1000_i350:
2769 case e1000_82580:
2770 num_rx_queues = 1;
2771 shift = 0;
2772 break;
2773 case e1000_82576:
2774 shift = 3;
2775 num_rx_queues = 2;
2776 break;
2777 case e1000_82575:
2778 shift = 2;
2779 shift2 = 6;
2780 default:
2781 break;
2783 } else {
2784 if (hw->mac.type == e1000_82575)
2785 shift = 6;
2788 for (j = 0; j < (32 * 4); j++) {
2789 reta.bytes[j & 3] = (j % num_rx_queues) << shift;
2790 if (shift2)
2791 reta.bytes[j & 3] |= num_rx_queues << shift2;
2792 if ((j & 3) == 3)
2793 wr32(E1000_RETA(j >> 2), reta.dword);
2797 * Disable raw packet checksumming so that RSS hash is placed in
2798 * descriptor on writeback. No need to enable TCP/UDP/IP checksum
2799 * offloads as they are enabled by default
2801 rxcsum = rd32(E1000_RXCSUM);
2802 rxcsum |= E1000_RXCSUM_PCSD;
2804 if (adapter->hw.mac.type >= e1000_82576)
2805 /* Enable Receive Checksum Offload for SCTP */
2806 rxcsum |= E1000_RXCSUM_CRCOFL;
2808 /* Don't need to set TUOFL or IPOFL, they default to 1 */
2809 wr32(E1000_RXCSUM, rxcsum);
2811 /* If VMDq is enabled then we set the appropriate mode for that, else
2812 * we default to RSS so that an RSS hash is calculated per packet even
2813 * if we are only using one queue */
2814 if (adapter->vfs_allocated_count) {
2815 if (hw->mac.type > e1000_82575) {
2816 /* Set the default pool for the PF's first queue */
2817 u32 vtctl = rd32(E1000_VT_CTL);
2818 vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
2819 E1000_VT_CTL_DISABLE_DEF_POOL);
2820 vtctl |= adapter->vfs_allocated_count <<
2821 E1000_VT_CTL_DEFAULT_POOL_SHIFT;
2822 wr32(E1000_VT_CTL, vtctl);
2824 if (adapter->rss_queues > 1)
2825 mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
2826 else
2827 mrqc = E1000_MRQC_ENABLE_VMDQ;
2828 } else {
2829 mrqc = E1000_MRQC_ENABLE_RSS_4Q;
2831 igb_vmm_control(adapter);
2834 * Generate RSS hash based on TCP port numbers and/or
2835 * IPv4/v6 src and dst addresses since UDP cannot be
2836 * hashed reliably due to IP fragmentation
2838 mrqc |= E1000_MRQC_RSS_FIELD_IPV4 |
2839 E1000_MRQC_RSS_FIELD_IPV4_TCP |
2840 E1000_MRQC_RSS_FIELD_IPV6 |
2841 E1000_MRQC_RSS_FIELD_IPV6_TCP |
2842 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
2844 wr32(E1000_MRQC, mrqc);
2848 * igb_setup_rctl - configure the receive control registers
2849 * @adapter: Board private structure
2851 void igb_setup_rctl(struct igb_adapter *adapter)
2853 struct e1000_hw *hw = &adapter->hw;
2854 u32 rctl;
2856 rctl = rd32(E1000_RCTL);
2858 rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
2859 rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
2861 rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
2862 (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
2865 * enable stripping of CRC. It's unlikely this will break BMC
2866 * redirection as it did with e1000. Newer features require
2867 * that the HW strips the CRC.
2869 rctl |= E1000_RCTL_SECRC;
2871 /* disable store bad packets and clear size bits. */
2872 rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
2874 /* enable LPE to prevent packets larger than max_frame_size */
2875 rctl |= E1000_RCTL_LPE;
2877 /* disable queue 0 to prevent tail write w/o re-config */
2878 wr32(E1000_RXDCTL(0), 0);
2880 /* Attention!!! For SR-IOV PF driver operations you must enable
2881 * queue drop for all VF and PF queues to prevent head of line blocking
2882 * if an un-trusted VF does not provide descriptors to hardware.
2884 if (adapter->vfs_allocated_count) {
2885 /* set all queue drop enable bits */
2886 wr32(E1000_QDE, ALL_QUEUES);
2889 wr32(E1000_RCTL, rctl);
2892 static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
2893 int vfn)
2895 struct e1000_hw *hw = &adapter->hw;
2896 u32 vmolr;
2898 /* if it isn't the PF check to see if VFs are enabled and
2899 * increase the size to support vlan tags */
2900 if (vfn < adapter->vfs_allocated_count &&
2901 adapter->vf_data[vfn].vlans_enabled)
2902 size += VLAN_TAG_SIZE;
2904 vmolr = rd32(E1000_VMOLR(vfn));
2905 vmolr &= ~E1000_VMOLR_RLPML_MASK;
2906 vmolr |= size | E1000_VMOLR_LPE;
2907 wr32(E1000_VMOLR(vfn), vmolr);
2909 return 0;
2913 * igb_rlpml_set - set maximum receive packet size
2914 * @adapter: board private structure
2916 * Configure maximum receivable packet size.
2918 static void igb_rlpml_set(struct igb_adapter *adapter)
2920 u32 max_frame_size = adapter->max_frame_size;
2921 struct e1000_hw *hw = &adapter->hw;
2922 u16 pf_id = adapter->vfs_allocated_count;
2924 if (adapter->vlgrp)
2925 max_frame_size += VLAN_TAG_SIZE;
2927 /* if vfs are enabled we set RLPML to the largest possible request
2928 * size and set the VMOLR RLPML to the size we need */
2929 if (pf_id) {
2930 igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
2931 max_frame_size = MAX_JUMBO_FRAME_SIZE;
2934 wr32(E1000_RLPML, max_frame_size);
2937 static inline void igb_set_vmolr(struct igb_adapter *adapter,
2938 int vfn, bool aupe)
2940 struct e1000_hw *hw = &adapter->hw;
2941 u32 vmolr;
2944 * This register exists only on 82576 and newer so if we are older then
2945 * we should exit and do nothing
2947 if (hw->mac.type < e1000_82576)
2948 return;
2950 vmolr = rd32(E1000_VMOLR(vfn));
2951 vmolr |= E1000_VMOLR_STRVLAN; /* Strip vlan tags */
2952 if (aupe)
2953 vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */
2954 else
2955 vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
2957 /* clear all bits that might not be set */
2958 vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
2960 if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
2961 vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
2963 * for VMDq only allow the VFs and pool 0 to accept broadcast and
2964 * multicast packets
2966 if (vfn <= adapter->vfs_allocated_count)
2967 vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */
2969 wr32(E1000_VMOLR(vfn), vmolr);
2973 * igb_configure_rx_ring - Configure a receive ring after Reset
2974 * @adapter: board private structure
2975 * @ring: receive ring to be configured
2977 * Configure the Rx unit of the MAC after a reset.
2979 void igb_configure_rx_ring(struct igb_adapter *adapter,
2980 struct igb_ring *ring)
2982 struct e1000_hw *hw = &adapter->hw;
2983 u64 rdba = ring->dma;
2984 int reg_idx = ring->reg_idx;
2985 u32 srrctl, rxdctl;
2987 /* disable the queue */
2988 rxdctl = rd32(E1000_RXDCTL(reg_idx));
2989 wr32(E1000_RXDCTL(reg_idx),
2990 rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
2992 /* Set DMA base address registers */
2993 wr32(E1000_RDBAL(reg_idx),
2994 rdba & 0x00000000ffffffffULL);
2995 wr32(E1000_RDBAH(reg_idx), rdba >> 32);
2996 wr32(E1000_RDLEN(reg_idx),
2997 ring->count * sizeof(union e1000_adv_rx_desc));
2999 /* initialize head and tail */
3000 ring->head = hw->hw_addr + E1000_RDH(reg_idx);
3001 ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
3002 writel(0, ring->head);
3003 writel(0, ring->tail);
3005 /* set descriptor configuration */
3006 if (ring->rx_buffer_len < IGB_RXBUFFER_1024) {
3007 srrctl = ALIGN(ring->rx_buffer_len, 64) <<
3008 E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
3009 #if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
3010 srrctl |= IGB_RXBUFFER_16384 >>
3011 E1000_SRRCTL_BSIZEPKT_SHIFT;
3012 #else
3013 srrctl |= (PAGE_SIZE / 2) >>
3014 E1000_SRRCTL_BSIZEPKT_SHIFT;
3015 #endif
3016 srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
3017 } else {
3018 srrctl = ALIGN(ring->rx_buffer_len, 1024) >>
3019 E1000_SRRCTL_BSIZEPKT_SHIFT;
3020 srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
3022 if (hw->mac.type == e1000_82580)
3023 srrctl |= E1000_SRRCTL_TIMESTAMP;
3024 /* Only set Drop Enable if we are supporting multiple queues */
3025 if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
3026 srrctl |= E1000_SRRCTL_DROP_EN;
3028 wr32(E1000_SRRCTL(reg_idx), srrctl);
3030 /* set filtering for VMDQ pools */
3031 igb_set_vmolr(adapter, reg_idx & 0x7, true);
3033 /* enable receive descriptor fetching */
3034 rxdctl = rd32(E1000_RXDCTL(reg_idx));
3035 rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
3036 rxdctl &= 0xFFF00000;
3037 rxdctl |= IGB_RX_PTHRESH;
3038 rxdctl |= IGB_RX_HTHRESH << 8;
3039 rxdctl |= IGB_RX_WTHRESH << 16;
3040 wr32(E1000_RXDCTL(reg_idx), rxdctl);
3044 * igb_configure_rx - Configure receive Unit after Reset
3045 * @adapter: board private structure
3047 * Configure the Rx unit of the MAC after a reset.
3049 static void igb_configure_rx(struct igb_adapter *adapter)
3051 int i;
3053 /* set UTA to appropriate mode */
3054 igb_set_uta(adapter);
3056 /* set the correct pool for the PF default MAC address in entry 0 */
3057 igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
3058 adapter->vfs_allocated_count);
3060 /* Setup the HW Rx Head and Tail Descriptor Pointers and
3061 * the Base and Length of the Rx Descriptor Ring */
3062 for (i = 0; i < adapter->num_rx_queues; i++)
3063 igb_configure_rx_ring(adapter, adapter->rx_ring[i]);
3067 * igb_free_tx_resources - Free Tx Resources per Queue
3068 * @tx_ring: Tx descriptor ring for a specific queue
3070 * Free all transmit software resources
3072 void igb_free_tx_resources(struct igb_ring *tx_ring)
3074 igb_clean_tx_ring(tx_ring);
3076 vfree(tx_ring->buffer_info);
3077 tx_ring->buffer_info = NULL;
3079 /* if not set, then don't free */
3080 if (!tx_ring->desc)
3081 return;
3083 dma_free_coherent(tx_ring->dev, tx_ring->size,
3084 tx_ring->desc, tx_ring->dma);
3086 tx_ring->desc = NULL;
3090 * igb_free_all_tx_resources - Free Tx Resources for All Queues
3091 * @adapter: board private structure
3093 * Free all transmit software resources
3095 static void igb_free_all_tx_resources(struct igb_adapter *adapter)
3097 int i;
3099 for (i = 0; i < adapter->num_tx_queues; i++)
3100 igb_free_tx_resources(adapter->tx_ring[i]);
3103 void igb_unmap_and_free_tx_resource(struct igb_ring *tx_ring,
3104 struct igb_buffer *buffer_info)
3106 if (buffer_info->dma) {
3107 if (buffer_info->mapped_as_page)
3108 dma_unmap_page(tx_ring->dev,
3109 buffer_info->dma,
3110 buffer_info->length,
3111 DMA_TO_DEVICE);
3112 else
3113 dma_unmap_single(tx_ring->dev,
3114 buffer_info->dma,
3115 buffer_info->length,
3116 DMA_TO_DEVICE);
3117 buffer_info->dma = 0;
3119 if (buffer_info->skb) {
3120 dev_kfree_skb_any(buffer_info->skb);
3121 buffer_info->skb = NULL;
3123 buffer_info->time_stamp = 0;
3124 buffer_info->length = 0;
3125 buffer_info->next_to_watch = 0;
3126 buffer_info->mapped_as_page = false;
3130 * igb_clean_tx_ring - Free Tx Buffers
3131 * @tx_ring: ring to be cleaned
3133 static void igb_clean_tx_ring(struct igb_ring *tx_ring)
3135 struct igb_buffer *buffer_info;
3136 unsigned long size;
3137 unsigned int i;
3139 if (!tx_ring->buffer_info)
3140 return;
3141 /* Free all the Tx ring sk_buffs */
3143 for (i = 0; i < tx_ring->count; i++) {
3144 buffer_info = &tx_ring->buffer_info[i];
3145 igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
3148 size = sizeof(struct igb_buffer) * tx_ring->count;
3149 memset(tx_ring->buffer_info, 0, size);
3151 /* Zero out the descriptor ring */
3152 memset(tx_ring->desc, 0, tx_ring->size);
3154 tx_ring->next_to_use = 0;
3155 tx_ring->next_to_clean = 0;
3159 * igb_clean_all_tx_rings - Free Tx Buffers for all queues
3160 * @adapter: board private structure
3162 static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
3164 int i;
3166 for (i = 0; i < adapter->num_tx_queues; i++)
3167 igb_clean_tx_ring(adapter->tx_ring[i]);
3171 * igb_free_rx_resources - Free Rx Resources
3172 * @rx_ring: ring to clean the resources from
3174 * Free all receive software resources
3176 void igb_free_rx_resources(struct igb_ring *rx_ring)
3178 igb_clean_rx_ring(rx_ring);
3180 vfree(rx_ring->buffer_info);
3181 rx_ring->buffer_info = NULL;
3183 /* if not set, then don't free */
3184 if (!rx_ring->desc)
3185 return;
3187 dma_free_coherent(rx_ring->dev, rx_ring->size,
3188 rx_ring->desc, rx_ring->dma);
3190 rx_ring->desc = NULL;
3194 * igb_free_all_rx_resources - Free Rx Resources for All Queues
3195 * @adapter: board private structure
3197 * Free all receive software resources
3199 static void igb_free_all_rx_resources(struct igb_adapter *adapter)
3201 int i;
3203 for (i = 0; i < adapter->num_rx_queues; i++)
3204 igb_free_rx_resources(adapter->rx_ring[i]);
3208 * igb_clean_rx_ring - Free Rx Buffers per Queue
3209 * @rx_ring: ring to free buffers from
3211 static void igb_clean_rx_ring(struct igb_ring *rx_ring)
3213 struct igb_buffer *buffer_info;
3214 unsigned long size;
3215 unsigned int i;
3217 if (!rx_ring->buffer_info)
3218 return;
3220 /* Free all the Rx ring sk_buffs */
3221 for (i = 0; i < rx_ring->count; i++) {
3222 buffer_info = &rx_ring->buffer_info[i];
3223 if (buffer_info->dma) {
3224 dma_unmap_single(rx_ring->dev,
3225 buffer_info->dma,
3226 rx_ring->rx_buffer_len,
3227 DMA_FROM_DEVICE);
3228 buffer_info->dma = 0;
3231 if (buffer_info->skb) {
3232 dev_kfree_skb(buffer_info->skb);
3233 buffer_info->skb = NULL;
3235 if (buffer_info->page_dma) {
3236 dma_unmap_page(rx_ring->dev,
3237 buffer_info->page_dma,
3238 PAGE_SIZE / 2,
3239 DMA_FROM_DEVICE);
3240 buffer_info->page_dma = 0;
3242 if (buffer_info->page) {
3243 put_page(buffer_info->page);
3244 buffer_info->page = NULL;
3245 buffer_info->page_offset = 0;
3249 size = sizeof(struct igb_buffer) * rx_ring->count;
3250 memset(rx_ring->buffer_info, 0, size);
3252 /* Zero out the descriptor ring */
3253 memset(rx_ring->desc, 0, rx_ring->size);
3255 rx_ring->next_to_clean = 0;
3256 rx_ring->next_to_use = 0;
3260 * igb_clean_all_rx_rings - Free Rx Buffers for all queues
3261 * @adapter: board private structure
3263 static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
3265 int i;
3267 for (i = 0; i < adapter->num_rx_queues; i++)
3268 igb_clean_rx_ring(adapter->rx_ring[i]);
3272 * igb_set_mac - Change the Ethernet Address of the NIC
3273 * @netdev: network interface device structure
3274 * @p: pointer to an address structure
3276 * Returns 0 on success, negative on failure
3278 static int igb_set_mac(struct net_device *netdev, void *p)
3280 struct igb_adapter *adapter = netdev_priv(netdev);
3281 struct e1000_hw *hw = &adapter->hw;
3282 struct sockaddr *addr = p;
3284 if (!is_valid_ether_addr(addr->sa_data))
3285 return -EADDRNOTAVAIL;
3287 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
3288 memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
3290 /* set the correct pool for the new PF MAC address in entry 0 */
3291 igb_rar_set_qsel(adapter, hw->mac.addr, 0,
3292 adapter->vfs_allocated_count);
3294 return 0;
3298 * igb_write_mc_addr_list - write multicast addresses to MTA
3299 * @netdev: network interface device structure
3301 * Writes multicast address list to the MTA hash table.
3302 * Returns: -ENOMEM on failure
3303 * 0 on no addresses written
3304 * X on writing X addresses to MTA
3306 static int igb_write_mc_addr_list(struct net_device *netdev)
3308 struct igb_adapter *adapter = netdev_priv(netdev);
3309 struct e1000_hw *hw = &adapter->hw;
3310 struct netdev_hw_addr *ha;
3311 u8 *mta_list;
3312 int i;
3314 if (netdev_mc_empty(netdev)) {
3315 /* nothing to program, so clear mc list */
3316 igb_update_mc_addr_list(hw, NULL, 0);
3317 igb_restore_vf_multicasts(adapter);
3318 return 0;
3321 mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
3322 if (!mta_list)
3323 return -ENOMEM;
3325 /* The shared function expects a packed array of only addresses. */
3326 i = 0;
3327 netdev_for_each_mc_addr(ha, netdev)
3328 memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
3330 igb_update_mc_addr_list(hw, mta_list, i);
3331 kfree(mta_list);
3333 return netdev_mc_count(netdev);
3337 * igb_write_uc_addr_list - write unicast addresses to RAR table
3338 * @netdev: network interface device structure
3340 * Writes unicast address list to the RAR table.
3341 * Returns: -ENOMEM on failure/insufficient address space
3342 * 0 on no addresses written
3343 * X on writing X addresses to the RAR table
3345 static int igb_write_uc_addr_list(struct net_device *netdev)
3347 struct igb_adapter *adapter = netdev_priv(netdev);
3348 struct e1000_hw *hw = &adapter->hw;
3349 unsigned int vfn = adapter->vfs_allocated_count;
3350 unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
3351 int count = 0;
3353 /* return ENOMEM indicating insufficient memory for addresses */
3354 if (netdev_uc_count(netdev) > rar_entries)
3355 return -ENOMEM;
3357 if (!netdev_uc_empty(netdev) && rar_entries) {
3358 struct netdev_hw_addr *ha;
3360 netdev_for_each_uc_addr(ha, netdev) {
3361 if (!rar_entries)
3362 break;
3363 igb_rar_set_qsel(adapter, ha->addr,
3364 rar_entries--,
3365 vfn);
3366 count++;
3369 /* write the addresses in reverse order to avoid write combining */
3370 for (; rar_entries > 0 ; rar_entries--) {
3371 wr32(E1000_RAH(rar_entries), 0);
3372 wr32(E1000_RAL(rar_entries), 0);
3374 wrfl();
3376 return count;
3380 * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
3381 * @netdev: network interface device structure
3383 * The set_rx_mode entry point is called whenever the unicast or multicast
3384 * address lists or the network interface flags are updated. This routine is
3385 * responsible for configuring the hardware for proper unicast, multicast,
3386 * promiscuous mode, and all-multi behavior.
3388 static void igb_set_rx_mode(struct net_device *netdev)
3390 struct igb_adapter *adapter = netdev_priv(netdev);
3391 struct e1000_hw *hw = &adapter->hw;
3392 unsigned int vfn = adapter->vfs_allocated_count;
3393 u32 rctl, vmolr = 0;
3394 int count;
3396 /* Check for Promiscuous and All Multicast modes */
3397 rctl = rd32(E1000_RCTL);
3399 /* clear the effected bits */
3400 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
3402 if (netdev->flags & IFF_PROMISC) {
3403 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
3404 vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
3405 } else {
3406 if (netdev->flags & IFF_ALLMULTI) {
3407 rctl |= E1000_RCTL_MPE;
3408 vmolr |= E1000_VMOLR_MPME;
3409 } else {
3411 * Write addresses to the MTA, if the attempt fails
3412 * then we should just turn on promiscuous mode so
3413 * that we can at least receive multicast traffic
3415 count = igb_write_mc_addr_list(netdev);
3416 if (count < 0) {
3417 rctl |= E1000_RCTL_MPE;
3418 vmolr |= E1000_VMOLR_MPME;
3419 } else if (count) {
3420 vmolr |= E1000_VMOLR_ROMPE;
3424 * Write addresses to available RAR registers, if there is not
3425 * sufficient space to store all the addresses then enable
3426 * unicast promiscuous mode
3428 count = igb_write_uc_addr_list(netdev);
3429 if (count < 0) {
3430 rctl |= E1000_RCTL_UPE;
3431 vmolr |= E1000_VMOLR_ROPE;
3433 rctl |= E1000_RCTL_VFE;
3435 wr32(E1000_RCTL, rctl);
3438 * In order to support SR-IOV and eventually VMDq it is necessary to set
3439 * the VMOLR to enable the appropriate modes. Without this workaround
3440 * we will have issues with VLAN tag stripping not being done for frames
3441 * that are only arriving because we are the default pool
3443 if (hw->mac.type < e1000_82576)
3444 return;
3446 vmolr |= rd32(E1000_VMOLR(vfn)) &
3447 ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
3448 wr32(E1000_VMOLR(vfn), vmolr);
3449 igb_restore_vf_multicasts(adapter);
3452 static void igb_check_wvbr(struct igb_adapter *adapter)
3454 struct e1000_hw *hw = &adapter->hw;
3455 u32 wvbr = 0;
3457 switch (hw->mac.type) {
3458 case e1000_82576:
3459 case e1000_i350:
3460 if (!(wvbr = rd32(E1000_WVBR)))
3461 return;
3462 break;
3463 default:
3464 break;
3467 adapter->wvbr |= wvbr;
3470 #define IGB_STAGGERED_QUEUE_OFFSET 8
3472 static void igb_spoof_check(struct igb_adapter *adapter)
3474 int j;
3476 if (!adapter->wvbr)
3477 return;
3479 for(j = 0; j < adapter->vfs_allocated_count; j++) {
3480 if (adapter->wvbr & (1 << j) ||
3481 adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
3482 dev_warn(&adapter->pdev->dev,
3483 "Spoof event(s) detected on VF %d\n", j);
3484 adapter->wvbr &=
3485 ~((1 << j) |
3486 (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
3491 /* Need to wait a few seconds after link up to get diagnostic information from
3492 * the phy */
3493 static void igb_update_phy_info(unsigned long data)
3495 struct igb_adapter *adapter = (struct igb_adapter *) data;
3496 igb_get_phy_info(&adapter->hw);
3500 * igb_has_link - check shared code for link and determine up/down
3501 * @adapter: pointer to driver private info
3503 bool igb_has_link(struct igb_adapter *adapter)
3505 struct e1000_hw *hw = &adapter->hw;
3506 bool link_active = false;
3507 s32 ret_val = 0;
3509 /* get_link_status is set on LSC (link status) interrupt or
3510 * rx sequence error interrupt. get_link_status will stay
3511 * false until the e1000_check_for_link establishes link
3512 * for copper adapters ONLY
3514 switch (hw->phy.media_type) {
3515 case e1000_media_type_copper:
3516 if (hw->mac.get_link_status) {
3517 ret_val = hw->mac.ops.check_for_link(hw);
3518 link_active = !hw->mac.get_link_status;
3519 } else {
3520 link_active = true;
3522 break;
3523 case e1000_media_type_internal_serdes:
3524 ret_val = hw->mac.ops.check_for_link(hw);
3525 link_active = hw->mac.serdes_has_link;
3526 break;
3527 default:
3528 case e1000_media_type_unknown:
3529 break;
3532 return link_active;
3535 static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
3537 bool ret = false;
3538 u32 ctrl_ext, thstat;
3540 /* check for thermal sensor event on i350, copper only */
3541 if (hw->mac.type == e1000_i350) {
3542 thstat = rd32(E1000_THSTAT);
3543 ctrl_ext = rd32(E1000_CTRL_EXT);
3545 if ((hw->phy.media_type == e1000_media_type_copper) &&
3546 !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII)) {
3547 ret = !!(thstat & event);
3551 return ret;
3555 * igb_watchdog - Timer Call-back
3556 * @data: pointer to adapter cast into an unsigned long
3558 static void igb_watchdog(unsigned long data)
3560 struct igb_adapter *adapter = (struct igb_adapter *)data;
3561 /* Do the rest outside of interrupt context */
3562 schedule_work(&adapter->watchdog_task);
3565 static void igb_watchdog_task(struct work_struct *work)
3567 struct igb_adapter *adapter = container_of(work,
3568 struct igb_adapter,
3569 watchdog_task);
3570 struct e1000_hw *hw = &adapter->hw;
3571 struct net_device *netdev = adapter->netdev;
3572 u32 link;
3573 int i;
3575 link = igb_has_link(adapter);
3576 if (link) {
3577 if (!netif_carrier_ok(netdev)) {
3578 u32 ctrl;
3579 hw->mac.ops.get_speed_and_duplex(hw,
3580 &adapter->link_speed,
3581 &adapter->link_duplex);
3583 ctrl = rd32(E1000_CTRL);
3584 /* Links status message must follow this format */
3585 printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
3586 "Flow Control: %s\n",
3587 netdev->name,
3588 adapter->link_speed,
3589 adapter->link_duplex == FULL_DUPLEX ?
3590 "Full Duplex" : "Half Duplex",
3591 ((ctrl & E1000_CTRL_TFCE) &&
3592 (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
3593 ((ctrl & E1000_CTRL_RFCE) ? "RX" :
3594 ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
3596 /* check for thermal sensor event */
3597 if (igb_thermal_sensor_event(hw, E1000_THSTAT_LINK_THROTTLE)) {
3598 printk(KERN_INFO "igb: %s The network adapter "
3599 "link speed was downshifted "
3600 "because it overheated.\n",
3601 netdev->name);
3604 /* adjust timeout factor according to speed/duplex */
3605 adapter->tx_timeout_factor = 1;
3606 switch (adapter->link_speed) {
3607 case SPEED_10:
3608 adapter->tx_timeout_factor = 14;
3609 break;
3610 case SPEED_100:
3611 /* maybe add some timeout factor ? */
3612 break;
3615 netif_carrier_on(netdev);
3617 igb_ping_all_vfs(adapter);
3618 igb_check_vf_rate_limit(adapter);
3620 /* link state has changed, schedule phy info update */
3621 if (!test_bit(__IGB_DOWN, &adapter->state))
3622 mod_timer(&adapter->phy_info_timer,
3623 round_jiffies(jiffies + 2 * HZ));
3625 } else {
3626 if (netif_carrier_ok(netdev)) {
3627 adapter->link_speed = 0;
3628 adapter->link_duplex = 0;
3630 /* check for thermal sensor event */
3631 if (igb_thermal_sensor_event(hw, E1000_THSTAT_PWR_DOWN)) {
3632 printk(KERN_ERR "igb: %s The network adapter "
3633 "was stopped because it "
3634 "overheated.\n",
3635 netdev->name);
3638 /* Links status message must follow this format */
3639 printk(KERN_INFO "igb: %s NIC Link is Down\n",
3640 netdev->name);
3641 netif_carrier_off(netdev);
3643 igb_ping_all_vfs(adapter);
3645 /* link state has changed, schedule phy info update */
3646 if (!test_bit(__IGB_DOWN, &adapter->state))
3647 mod_timer(&adapter->phy_info_timer,
3648 round_jiffies(jiffies + 2 * HZ));
3652 spin_lock(&adapter->stats64_lock);
3653 igb_update_stats(adapter, &adapter->stats64);
3654 spin_unlock(&adapter->stats64_lock);
3656 for (i = 0; i < adapter->num_tx_queues; i++) {
3657 struct igb_ring *tx_ring = adapter->tx_ring[i];
3658 if (!netif_carrier_ok(netdev)) {
3659 /* We've lost link, so the controller stops DMA,
3660 * but we've got queued Tx work that's never going
3661 * to get done, so reset controller to flush Tx.
3662 * (Do the reset outside of interrupt context). */
3663 if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
3664 adapter->tx_timeout_count++;
3665 schedule_work(&adapter->reset_task);
3666 /* return immediately since reset is imminent */
3667 return;
3671 /* Force detection of hung controller every watchdog period */
3672 tx_ring->detect_tx_hung = true;
3675 /* Cause software interrupt to ensure rx ring is cleaned */
3676 if (adapter->msix_entries) {
3677 u32 eics = 0;
3678 for (i = 0; i < adapter->num_q_vectors; i++) {
3679 struct igb_q_vector *q_vector = adapter->q_vector[i];
3680 eics |= q_vector->eims_value;
3682 wr32(E1000_EICS, eics);
3683 } else {
3684 wr32(E1000_ICS, E1000_ICS_RXDMT0);
3687 igb_spoof_check(adapter);
3689 /* Reset the timer */
3690 if (!test_bit(__IGB_DOWN, &adapter->state))
3691 mod_timer(&adapter->watchdog_timer,
3692 round_jiffies(jiffies + 2 * HZ));
3695 enum latency_range {
3696 lowest_latency = 0,
3697 low_latency = 1,
3698 bulk_latency = 2,
3699 latency_invalid = 255
3703 * igb_update_ring_itr - update the dynamic ITR value based on packet size
3705 * Stores a new ITR value based on strictly on packet size. This
3706 * algorithm is less sophisticated than that used in igb_update_itr,
3707 * due to the difficulty of synchronizing statistics across multiple
3708 * receive rings. The divisors and thresholds used by this function
3709 * were determined based on theoretical maximum wire speed and testing
3710 * data, in order to minimize response time while increasing bulk
3711 * throughput.
3712 * This functionality is controlled by the InterruptThrottleRate module
3713 * parameter (see igb_param.c)
3714 * NOTE: This function is called only when operating in a multiqueue
3715 * receive environment.
3716 * @q_vector: pointer to q_vector
3718 static void igb_update_ring_itr(struct igb_q_vector *q_vector)
3720 int new_val = q_vector->itr_val;
3721 int avg_wire_size = 0;
3722 struct igb_adapter *adapter = q_vector->adapter;
3723 struct igb_ring *ring;
3724 unsigned int packets;
3726 /* For non-gigabit speeds, just fix the interrupt rate at 4000
3727 * ints/sec - ITR timer value of 120 ticks.
3729 if (adapter->link_speed != SPEED_1000) {
3730 new_val = 976;
3731 goto set_itr_val;
3734 ring = q_vector->rx_ring;
3735 if (ring) {
3736 packets = ACCESS_ONCE(ring->total_packets);
3738 if (packets)
3739 avg_wire_size = ring->total_bytes / packets;
3742 ring = q_vector->tx_ring;
3743 if (ring) {
3744 packets = ACCESS_ONCE(ring->total_packets);
3746 if (packets)
3747 avg_wire_size = max_t(u32, avg_wire_size,
3748 ring->total_bytes / packets);
3751 /* if avg_wire_size isn't set no work was done */
3752 if (!avg_wire_size)
3753 goto clear_counts;
3755 /* Add 24 bytes to size to account for CRC, preamble, and gap */
3756 avg_wire_size += 24;
3758 /* Don't starve jumbo frames */
3759 avg_wire_size = min(avg_wire_size, 3000);
3761 /* Give a little boost to mid-size frames */
3762 if ((avg_wire_size > 300) && (avg_wire_size < 1200))
3763 new_val = avg_wire_size / 3;
3764 else
3765 new_val = avg_wire_size / 2;
3767 /* when in itr mode 3 do not exceed 20K ints/sec */
3768 if (adapter->rx_itr_setting == 3 && new_val < 196)
3769 new_val = 196;
3771 set_itr_val:
3772 if (new_val != q_vector->itr_val) {
3773 q_vector->itr_val = new_val;
3774 q_vector->set_itr = 1;
3776 clear_counts:
3777 if (q_vector->rx_ring) {
3778 q_vector->rx_ring->total_bytes = 0;
3779 q_vector->rx_ring->total_packets = 0;
3781 if (q_vector->tx_ring) {
3782 q_vector->tx_ring->total_bytes = 0;
3783 q_vector->tx_ring->total_packets = 0;
3788 * igb_update_itr - update the dynamic ITR value based on statistics
3789 * Stores a new ITR value based on packets and byte
3790 * counts during the last interrupt. The advantage of per interrupt
3791 * computation is faster updates and more accurate ITR for the current
3792 * traffic pattern. Constants in this function were computed
3793 * based on theoretical maximum wire speed and thresholds were set based
3794 * on testing data as well as attempting to minimize response time
3795 * while increasing bulk throughput.
3796 * this functionality is controlled by the InterruptThrottleRate module
3797 * parameter (see igb_param.c)
3798 * NOTE: These calculations are only valid when operating in a single-
3799 * queue environment.
3800 * @adapter: pointer to adapter
3801 * @itr_setting: current q_vector->itr_val
3802 * @packets: the number of packets during this measurement interval
3803 * @bytes: the number of bytes during this measurement interval
3805 static unsigned int igb_update_itr(struct igb_adapter *adapter, u16 itr_setting,
3806 int packets, int bytes)
3808 unsigned int retval = itr_setting;
3810 if (packets == 0)
3811 goto update_itr_done;
3813 switch (itr_setting) {
3814 case lowest_latency:
3815 /* handle TSO and jumbo frames */
3816 if (bytes/packets > 8000)
3817 retval = bulk_latency;
3818 else if ((packets < 5) && (bytes > 512))
3819 retval = low_latency;
3820 break;
3821 case low_latency: /* 50 usec aka 20000 ints/s */
3822 if (bytes > 10000) {
3823 /* this if handles the TSO accounting */
3824 if (bytes/packets > 8000) {
3825 retval = bulk_latency;
3826 } else if ((packets < 10) || ((bytes/packets) > 1200)) {
3827 retval = bulk_latency;
3828 } else if ((packets > 35)) {
3829 retval = lowest_latency;
3831 } else if (bytes/packets > 2000) {
3832 retval = bulk_latency;
3833 } else if (packets <= 2 && bytes < 512) {
3834 retval = lowest_latency;
3836 break;
3837 case bulk_latency: /* 250 usec aka 4000 ints/s */
3838 if (bytes > 25000) {
3839 if (packets > 35)
3840 retval = low_latency;
3841 } else if (bytes < 1500) {
3842 retval = low_latency;
3844 break;
3847 update_itr_done:
3848 return retval;
3851 static void igb_set_itr(struct igb_adapter *adapter)
3853 struct igb_q_vector *q_vector = adapter->q_vector[0];
3854 u16 current_itr;
3855 u32 new_itr = q_vector->itr_val;
3857 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
3858 if (adapter->link_speed != SPEED_1000) {
3859 current_itr = 0;
3860 new_itr = 4000;
3861 goto set_itr_now;
3864 adapter->rx_itr = igb_update_itr(adapter,
3865 adapter->rx_itr,
3866 q_vector->rx_ring->total_packets,
3867 q_vector->rx_ring->total_bytes);
3869 adapter->tx_itr = igb_update_itr(adapter,
3870 adapter->tx_itr,
3871 q_vector->tx_ring->total_packets,
3872 q_vector->tx_ring->total_bytes);
3873 current_itr = max(adapter->rx_itr, adapter->tx_itr);
3875 /* conservative mode (itr 3) eliminates the lowest_latency setting */
3876 if (adapter->rx_itr_setting == 3 && current_itr == lowest_latency)
3877 current_itr = low_latency;
3879 switch (current_itr) {
3880 /* counts and packets in update_itr are dependent on these numbers */
3881 case lowest_latency:
3882 new_itr = 56; /* aka 70,000 ints/sec */
3883 break;
3884 case low_latency:
3885 new_itr = 196; /* aka 20,000 ints/sec */
3886 break;
3887 case bulk_latency:
3888 new_itr = 980; /* aka 4,000 ints/sec */
3889 break;
3890 default:
3891 break;
3894 set_itr_now:
3895 q_vector->rx_ring->total_bytes = 0;
3896 q_vector->rx_ring->total_packets = 0;
3897 q_vector->tx_ring->total_bytes = 0;
3898 q_vector->tx_ring->total_packets = 0;
3900 if (new_itr != q_vector->itr_val) {
3901 /* this attempts to bias the interrupt rate towards Bulk
3902 * by adding intermediate steps when interrupt rate is
3903 * increasing */
3904 new_itr = new_itr > q_vector->itr_val ?
3905 max((new_itr * q_vector->itr_val) /
3906 (new_itr + (q_vector->itr_val >> 2)),
3907 new_itr) :
3908 new_itr;
3909 /* Don't write the value here; it resets the adapter's
3910 * internal timer, and causes us to delay far longer than
3911 * we should between interrupts. Instead, we write the ITR
3912 * value at the beginning of the next interrupt so the timing
3913 * ends up being correct.
3915 q_vector->itr_val = new_itr;
3916 q_vector->set_itr = 1;
3920 #define IGB_TX_FLAGS_CSUM 0x00000001
3921 #define IGB_TX_FLAGS_VLAN 0x00000002
3922 #define IGB_TX_FLAGS_TSO 0x00000004
3923 #define IGB_TX_FLAGS_IPV4 0x00000008
3924 #define IGB_TX_FLAGS_TSTAMP 0x00000010
3925 #define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
3926 #define IGB_TX_FLAGS_VLAN_SHIFT 16
3928 static inline int igb_tso_adv(struct igb_ring *tx_ring,
3929 struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
3931 struct e1000_adv_tx_context_desc *context_desc;
3932 unsigned int i;
3933 int err;
3934 struct igb_buffer *buffer_info;
3935 u32 info = 0, tu_cmd = 0;
3936 u32 mss_l4len_idx;
3937 u8 l4len;
3939 if (skb_header_cloned(skb)) {
3940 err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
3941 if (err)
3942 return err;
3945 l4len = tcp_hdrlen(skb);
3946 *hdr_len += l4len;
3948 if (skb->protocol == htons(ETH_P_IP)) {
3949 struct iphdr *iph = ip_hdr(skb);
3950 iph->tot_len = 0;
3951 iph->check = 0;
3952 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
3953 iph->daddr, 0,
3954 IPPROTO_TCP,
3956 } else if (skb_is_gso_v6(skb)) {
3957 ipv6_hdr(skb)->payload_len = 0;
3958 tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
3959 &ipv6_hdr(skb)->daddr,
3960 0, IPPROTO_TCP, 0);
3963 i = tx_ring->next_to_use;
3965 buffer_info = &tx_ring->buffer_info[i];
3966 context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i);
3967 /* VLAN MACLEN IPLEN */
3968 if (tx_flags & IGB_TX_FLAGS_VLAN)
3969 info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
3970 info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
3971 *hdr_len += skb_network_offset(skb);
3972 info |= skb_network_header_len(skb);
3973 *hdr_len += skb_network_header_len(skb);
3974 context_desc->vlan_macip_lens = cpu_to_le32(info);
3976 /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
3977 tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
3979 if (skb->protocol == htons(ETH_P_IP))
3980 tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
3981 tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
3983 context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
3985 /* MSS L4LEN IDX */
3986 mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT);
3987 mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
3989 /* For 82575, context index must be unique per ring. */
3990 if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
3991 mss_l4len_idx |= tx_ring->reg_idx << 4;
3993 context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
3994 context_desc->seqnum_seed = 0;
3996 buffer_info->time_stamp = jiffies;
3997 buffer_info->next_to_watch = i;
3998 buffer_info->dma = 0;
3999 i++;
4000 if (i == tx_ring->count)
4001 i = 0;
4003 tx_ring->next_to_use = i;
4005 return true;
4008 static inline bool igb_tx_csum_adv(struct igb_ring *tx_ring,
4009 struct sk_buff *skb, u32 tx_flags)
4011 struct e1000_adv_tx_context_desc *context_desc;
4012 struct device *dev = tx_ring->dev;
4013 struct igb_buffer *buffer_info;
4014 u32 info = 0, tu_cmd = 0;
4015 unsigned int i;
4017 if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
4018 (tx_flags & IGB_TX_FLAGS_VLAN)) {
4019 i = tx_ring->next_to_use;
4020 buffer_info = &tx_ring->buffer_info[i];
4021 context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i);
4023 if (tx_flags & IGB_TX_FLAGS_VLAN)
4024 info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
4026 info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
4027 if (skb->ip_summed == CHECKSUM_PARTIAL)
4028 info |= skb_network_header_len(skb);
4030 context_desc->vlan_macip_lens = cpu_to_le32(info);
4032 tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
4034 if (skb->ip_summed == CHECKSUM_PARTIAL) {
4035 __be16 protocol;
4037 if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) {
4038 const struct vlan_ethhdr *vhdr =
4039 (const struct vlan_ethhdr*)skb->data;
4041 protocol = vhdr->h_vlan_encapsulated_proto;
4042 } else {
4043 protocol = skb->protocol;
4046 switch (protocol) {
4047 case cpu_to_be16(ETH_P_IP):
4048 tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
4049 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
4050 tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
4051 else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
4052 tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
4053 break;
4054 case cpu_to_be16(ETH_P_IPV6):
4055 /* XXX what about other V6 headers?? */
4056 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
4057 tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
4058 else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
4059 tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
4060 break;
4061 default:
4062 if (unlikely(net_ratelimit()))
4063 dev_warn(dev,
4064 "partial checksum but proto=%x!\n",
4065 skb->protocol);
4066 break;
4070 context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
4071 context_desc->seqnum_seed = 0;
4072 if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
4073 context_desc->mss_l4len_idx =
4074 cpu_to_le32(tx_ring->reg_idx << 4);
4076 buffer_info->time_stamp = jiffies;
4077 buffer_info->next_to_watch = i;
4078 buffer_info->dma = 0;
4080 i++;
4081 if (i == tx_ring->count)
4082 i = 0;
4083 tx_ring->next_to_use = i;
4085 return true;
4087 return false;
4090 #define IGB_MAX_TXD_PWR 16
4091 #define IGB_MAX_DATA_PER_TXD (1<<IGB_MAX_TXD_PWR)
4093 static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb,
4094 unsigned int first)
4096 struct igb_buffer *buffer_info;
4097 struct device *dev = tx_ring->dev;
4098 unsigned int hlen = skb_headlen(skb);
4099 unsigned int count = 0, i;
4100 unsigned int f;
4101 u16 gso_segs = skb_shinfo(skb)->gso_segs ?: 1;
4103 i = tx_ring->next_to_use;
4105 buffer_info = &tx_ring->buffer_info[i];
4106 BUG_ON(hlen >= IGB_MAX_DATA_PER_TXD);
4107 buffer_info->length = hlen;
4108 /* set time_stamp *before* dma to help avoid a possible race */
4109 buffer_info->time_stamp = jiffies;
4110 buffer_info->next_to_watch = i;
4111 buffer_info->dma = dma_map_single(dev, skb->data, hlen,
4112 DMA_TO_DEVICE);
4113 if (dma_mapping_error(dev, buffer_info->dma))
4114 goto dma_error;
4116 for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
4117 struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[f];
4118 unsigned int len = frag->size;
4120 count++;
4121 i++;
4122 if (i == tx_ring->count)
4123 i = 0;
4125 buffer_info = &tx_ring->buffer_info[i];
4126 BUG_ON(len >= IGB_MAX_DATA_PER_TXD);
4127 buffer_info->length = len;
4128 buffer_info->time_stamp = jiffies;
4129 buffer_info->next_to_watch = i;
4130 buffer_info->mapped_as_page = true;
4131 buffer_info->dma = dma_map_page(dev,
4132 frag->page,
4133 frag->page_offset,
4134 len,
4135 DMA_TO_DEVICE);
4136 if (dma_mapping_error(dev, buffer_info->dma))
4137 goto dma_error;
4141 tx_ring->buffer_info[i].skb = skb;
4142 tx_ring->buffer_info[i].tx_flags = skb_shinfo(skb)->tx_flags;
4143 /* multiply data chunks by size of headers */
4144 tx_ring->buffer_info[i].bytecount = ((gso_segs - 1) * hlen) + skb->len;
4145 tx_ring->buffer_info[i].gso_segs = gso_segs;
4146 tx_ring->buffer_info[first].next_to_watch = i;
4148 return ++count;
4150 dma_error:
4151 dev_err(dev, "TX DMA map failed\n");
4153 /* clear timestamp and dma mappings for failed buffer_info mapping */
4154 buffer_info->dma = 0;
4155 buffer_info->time_stamp = 0;
4156 buffer_info->length = 0;
4157 buffer_info->next_to_watch = 0;
4158 buffer_info->mapped_as_page = false;
4160 /* clear timestamp and dma mappings for remaining portion of packet */
4161 while (count--) {
4162 if (i == 0)
4163 i = tx_ring->count;
4164 i--;
4165 buffer_info = &tx_ring->buffer_info[i];
4166 igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
4169 return 0;
4172 static inline void igb_tx_queue_adv(struct igb_ring *tx_ring,
4173 u32 tx_flags, int count, u32 paylen,
4174 u8 hdr_len)
4176 union e1000_adv_tx_desc *tx_desc;
4177 struct igb_buffer *buffer_info;
4178 u32 olinfo_status = 0, cmd_type_len;
4179 unsigned int i = tx_ring->next_to_use;
4181 cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
4182 E1000_ADVTXD_DCMD_DEXT);
4184 if (tx_flags & IGB_TX_FLAGS_VLAN)
4185 cmd_type_len |= E1000_ADVTXD_DCMD_VLE;
4187 if (tx_flags & IGB_TX_FLAGS_TSTAMP)
4188 cmd_type_len |= E1000_ADVTXD_MAC_TSTAMP;
4190 if (tx_flags & IGB_TX_FLAGS_TSO) {
4191 cmd_type_len |= E1000_ADVTXD_DCMD_TSE;
4193 /* insert tcp checksum */
4194 olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
4196 /* insert ip checksum */
4197 if (tx_flags & IGB_TX_FLAGS_IPV4)
4198 olinfo_status |= E1000_TXD_POPTS_IXSM << 8;
4200 } else if (tx_flags & IGB_TX_FLAGS_CSUM) {
4201 olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
4204 if ((tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX) &&
4205 (tx_flags & (IGB_TX_FLAGS_CSUM |
4206 IGB_TX_FLAGS_TSO |
4207 IGB_TX_FLAGS_VLAN)))
4208 olinfo_status |= tx_ring->reg_idx << 4;
4210 olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
4212 do {
4213 buffer_info = &tx_ring->buffer_info[i];
4214 tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
4215 tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
4216 tx_desc->read.cmd_type_len =
4217 cpu_to_le32(cmd_type_len | buffer_info->length);
4218 tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
4219 count--;
4220 i++;
4221 if (i == tx_ring->count)
4222 i = 0;
4223 } while (count > 0);
4225 tx_desc->read.cmd_type_len |= cpu_to_le32(IGB_ADVTXD_DCMD);
4226 /* Force memory writes to complete before letting h/w
4227 * know there are new descriptors to fetch. (Only
4228 * applicable for weak-ordered memory model archs,
4229 * such as IA-64). */
4230 wmb();
4232 tx_ring->next_to_use = i;
4233 writel(i, tx_ring->tail);
4234 /* we need this if more than one processor can write to our tail
4235 * at a time, it syncronizes IO on IA64/Altix systems */
4236 mmiowb();
4239 static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
4241 struct net_device *netdev = tx_ring->netdev;
4243 netif_stop_subqueue(netdev, tx_ring->queue_index);
4245 /* Herbert's original patch had:
4246 * smp_mb__after_netif_stop_queue();
4247 * but since that doesn't exist yet, just open code it. */
4248 smp_mb();
4250 /* We need to check again in a case another CPU has just
4251 * made room available. */
4252 if (igb_desc_unused(tx_ring) < size)
4253 return -EBUSY;
4255 /* A reprieve! */
4256 netif_wake_subqueue(netdev, tx_ring->queue_index);
4258 u64_stats_update_begin(&tx_ring->tx_syncp2);
4259 tx_ring->tx_stats.restart_queue2++;
4260 u64_stats_update_end(&tx_ring->tx_syncp2);
4262 return 0;
4265 static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
4267 if (igb_desc_unused(tx_ring) >= size)
4268 return 0;
4269 return __igb_maybe_stop_tx(tx_ring, size);
4272 netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
4273 struct igb_ring *tx_ring)
4275 int tso = 0, count;
4276 u32 tx_flags = 0;
4277 u16 first;
4278 u8 hdr_len = 0;
4280 /* need: 1 descriptor per page,
4281 * + 2 desc gap to keep tail from touching head,
4282 * + 1 desc for skb->data,
4283 * + 1 desc for context descriptor,
4284 * otherwise try next time */
4285 if (igb_maybe_stop_tx(tx_ring, skb_shinfo(skb)->nr_frags + 4)) {
4286 /* this is a hard error */
4287 return NETDEV_TX_BUSY;
4290 if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
4291 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
4292 tx_flags |= IGB_TX_FLAGS_TSTAMP;
4295 if (vlan_tx_tag_present(skb)) {
4296 tx_flags |= IGB_TX_FLAGS_VLAN;
4297 tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
4300 if (skb->protocol == htons(ETH_P_IP))
4301 tx_flags |= IGB_TX_FLAGS_IPV4;
4303 first = tx_ring->next_to_use;
4304 if (skb_is_gso(skb)) {
4305 tso = igb_tso_adv(tx_ring, skb, tx_flags, &hdr_len);
4307 if (tso < 0) {
4308 dev_kfree_skb_any(skb);
4309 return NETDEV_TX_OK;
4313 if (tso)
4314 tx_flags |= IGB_TX_FLAGS_TSO;
4315 else if (igb_tx_csum_adv(tx_ring, skb, tx_flags) &&
4316 (skb->ip_summed == CHECKSUM_PARTIAL))
4317 tx_flags |= IGB_TX_FLAGS_CSUM;
4320 * count reflects descriptors mapped, if 0 or less then mapping error
4321 * has occurred and we need to rewind the descriptor queue
4323 count = igb_tx_map_adv(tx_ring, skb, first);
4324 if (!count) {
4325 dev_kfree_skb_any(skb);
4326 tx_ring->buffer_info[first].time_stamp = 0;
4327 tx_ring->next_to_use = first;
4328 return NETDEV_TX_OK;
4331 igb_tx_queue_adv(tx_ring, tx_flags, count, skb->len, hdr_len);
4333 /* Make sure there is space in the ring for the next send. */
4334 igb_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 4);
4336 return NETDEV_TX_OK;
4339 static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
4340 struct net_device *netdev)
4342 struct igb_adapter *adapter = netdev_priv(netdev);
4343 struct igb_ring *tx_ring;
4344 int r_idx = 0;
4346 if (test_bit(__IGB_DOWN, &adapter->state)) {
4347 dev_kfree_skb_any(skb);
4348 return NETDEV_TX_OK;
4351 if (skb->len <= 0) {
4352 dev_kfree_skb_any(skb);
4353 return NETDEV_TX_OK;
4356 r_idx = skb->queue_mapping & (IGB_ABS_MAX_TX_QUEUES - 1);
4357 tx_ring = adapter->multi_tx_table[r_idx];
4359 /* This goes back to the question of how to logically map a tx queue
4360 * to a flow. Right now, performance is impacted slightly negatively
4361 * if using multiple tx queues. If the stack breaks away from a
4362 * single qdisc implementation, we can look at this again. */
4363 return igb_xmit_frame_ring_adv(skb, tx_ring);
4367 * igb_tx_timeout - Respond to a Tx Hang
4368 * @netdev: network interface device structure
4370 static void igb_tx_timeout(struct net_device *netdev)
4372 struct igb_adapter *adapter = netdev_priv(netdev);
4373 struct e1000_hw *hw = &adapter->hw;
4375 /* Do the reset outside of interrupt context */
4376 adapter->tx_timeout_count++;
4378 if (hw->mac.type == e1000_82580)
4379 hw->dev_spec._82575.global_device_reset = true;
4381 schedule_work(&adapter->reset_task);
4382 wr32(E1000_EICS,
4383 (adapter->eims_enable_mask & ~adapter->eims_other));
4386 static void igb_reset_task(struct work_struct *work)
4388 struct igb_adapter *adapter;
4389 adapter = container_of(work, struct igb_adapter, reset_task);
4391 igb_dump(adapter);
4392 netdev_err(adapter->netdev, "Reset adapter\n");
4393 igb_reinit_locked(adapter);
4397 * igb_get_stats64 - Get System Network Statistics
4398 * @netdev: network interface device structure
4399 * @stats: rtnl_link_stats64 pointer
4402 static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev,
4403 struct rtnl_link_stats64 *stats)
4405 struct igb_adapter *adapter = netdev_priv(netdev);
4407 spin_lock(&adapter->stats64_lock);
4408 igb_update_stats(adapter, &adapter->stats64);
4409 memcpy(stats, &adapter->stats64, sizeof(*stats));
4410 spin_unlock(&adapter->stats64_lock);
4412 return stats;
4416 * igb_change_mtu - Change the Maximum Transfer Unit
4417 * @netdev: network interface device structure
4418 * @new_mtu: new value for maximum frame size
4420 * Returns 0 on success, negative on failure
4422 static int igb_change_mtu(struct net_device *netdev, int new_mtu)
4424 struct igb_adapter *adapter = netdev_priv(netdev);
4425 struct pci_dev *pdev = adapter->pdev;
4426 int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
4427 u32 rx_buffer_len, i;
4429 if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
4430 dev_err(&pdev->dev, "Invalid MTU setting\n");
4431 return -EINVAL;
4434 if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
4435 dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
4436 return -EINVAL;
4439 while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
4440 msleep(1);
4442 /* igb_down has a dependency on max_frame_size */
4443 adapter->max_frame_size = max_frame;
4445 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
4446 * means we reserve 2 more, this pushes us to allocate from the next
4447 * larger slab size.
4448 * i.e. RXBUFFER_2048 --> size-4096 slab
4451 if (adapter->hw.mac.type == e1000_82580)
4452 max_frame += IGB_TS_HDR_LEN;
4454 if (max_frame <= IGB_RXBUFFER_1024)
4455 rx_buffer_len = IGB_RXBUFFER_1024;
4456 else if (max_frame <= MAXIMUM_ETHERNET_VLAN_SIZE)
4457 rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
4458 else
4459 rx_buffer_len = IGB_RXBUFFER_128;
4461 if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN + IGB_TS_HDR_LEN) ||
4462 (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE + IGB_TS_HDR_LEN))
4463 rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE + IGB_TS_HDR_LEN;
4465 if ((adapter->hw.mac.type == e1000_82580) &&
4466 (rx_buffer_len == IGB_RXBUFFER_128))
4467 rx_buffer_len += IGB_RXBUFFER_64;
4469 if (netif_running(netdev))
4470 igb_down(adapter);
4472 dev_info(&pdev->dev, "changing MTU from %d to %d\n",
4473 netdev->mtu, new_mtu);
4474 netdev->mtu = new_mtu;
4476 for (i = 0; i < adapter->num_rx_queues; i++)
4477 adapter->rx_ring[i]->rx_buffer_len = rx_buffer_len;
4479 if (netif_running(netdev))
4480 igb_up(adapter);
4481 else
4482 igb_reset(adapter);
4484 clear_bit(__IGB_RESETTING, &adapter->state);
4486 return 0;
4490 * igb_update_stats - Update the board statistics counters
4491 * @adapter: board private structure
4494 void igb_update_stats(struct igb_adapter *adapter,
4495 struct rtnl_link_stats64 *net_stats)
4497 struct e1000_hw *hw = &adapter->hw;
4498 struct pci_dev *pdev = adapter->pdev;
4499 u32 reg, mpc;
4500 u16 phy_tmp;
4501 int i;
4502 u64 bytes, packets;
4503 unsigned int start;
4504 u64 _bytes, _packets;
4506 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
4509 * Prevent stats update while adapter is being reset, or if the pci
4510 * connection is down.
4512 if (adapter->link_speed == 0)
4513 return;
4514 if (pci_channel_offline(pdev))
4515 return;
4517 bytes = 0;
4518 packets = 0;
4519 for (i = 0; i < adapter->num_rx_queues; i++) {
4520 u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
4521 struct igb_ring *ring = adapter->rx_ring[i];
4523 ring->rx_stats.drops += rqdpc_tmp;
4524 net_stats->rx_fifo_errors += rqdpc_tmp;
4526 do {
4527 start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
4528 _bytes = ring->rx_stats.bytes;
4529 _packets = ring->rx_stats.packets;
4530 } while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
4531 bytes += _bytes;
4532 packets += _packets;
4535 net_stats->rx_bytes = bytes;
4536 net_stats->rx_packets = packets;
4538 bytes = 0;
4539 packets = 0;
4540 for (i = 0; i < adapter->num_tx_queues; i++) {
4541 struct igb_ring *ring = adapter->tx_ring[i];
4542 do {
4543 start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
4544 _bytes = ring->tx_stats.bytes;
4545 _packets = ring->tx_stats.packets;
4546 } while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
4547 bytes += _bytes;
4548 packets += _packets;
4550 net_stats->tx_bytes = bytes;
4551 net_stats->tx_packets = packets;
4553 /* read stats registers */
4554 adapter->stats.crcerrs += rd32(E1000_CRCERRS);
4555 adapter->stats.gprc += rd32(E1000_GPRC);
4556 adapter->stats.gorc += rd32(E1000_GORCL);
4557 rd32(E1000_GORCH); /* clear GORCL */
4558 adapter->stats.bprc += rd32(E1000_BPRC);
4559 adapter->stats.mprc += rd32(E1000_MPRC);
4560 adapter->stats.roc += rd32(E1000_ROC);
4562 adapter->stats.prc64 += rd32(E1000_PRC64);
4563 adapter->stats.prc127 += rd32(E1000_PRC127);
4564 adapter->stats.prc255 += rd32(E1000_PRC255);
4565 adapter->stats.prc511 += rd32(E1000_PRC511);
4566 adapter->stats.prc1023 += rd32(E1000_PRC1023);
4567 adapter->stats.prc1522 += rd32(E1000_PRC1522);
4568 adapter->stats.symerrs += rd32(E1000_SYMERRS);
4569 adapter->stats.sec += rd32(E1000_SEC);
4571 mpc = rd32(E1000_MPC);
4572 adapter->stats.mpc += mpc;
4573 net_stats->rx_fifo_errors += mpc;
4574 adapter->stats.scc += rd32(E1000_SCC);
4575 adapter->stats.ecol += rd32(E1000_ECOL);
4576 adapter->stats.mcc += rd32(E1000_MCC);
4577 adapter->stats.latecol += rd32(E1000_LATECOL);
4578 adapter->stats.dc += rd32(E1000_DC);
4579 adapter->stats.rlec += rd32(E1000_RLEC);
4580 adapter->stats.xonrxc += rd32(E1000_XONRXC);
4581 adapter->stats.xontxc += rd32(E1000_XONTXC);
4582 adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
4583 adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
4584 adapter->stats.fcruc += rd32(E1000_FCRUC);
4585 adapter->stats.gptc += rd32(E1000_GPTC);
4586 adapter->stats.gotc += rd32(E1000_GOTCL);
4587 rd32(E1000_GOTCH); /* clear GOTCL */
4588 adapter->stats.rnbc += rd32(E1000_RNBC);
4589 adapter->stats.ruc += rd32(E1000_RUC);
4590 adapter->stats.rfc += rd32(E1000_RFC);
4591 adapter->stats.rjc += rd32(E1000_RJC);
4592 adapter->stats.tor += rd32(E1000_TORH);
4593 adapter->stats.tot += rd32(E1000_TOTH);
4594 adapter->stats.tpr += rd32(E1000_TPR);
4596 adapter->stats.ptc64 += rd32(E1000_PTC64);
4597 adapter->stats.ptc127 += rd32(E1000_PTC127);
4598 adapter->stats.ptc255 += rd32(E1000_PTC255);
4599 adapter->stats.ptc511 += rd32(E1000_PTC511);
4600 adapter->stats.ptc1023 += rd32(E1000_PTC1023);
4601 adapter->stats.ptc1522 += rd32(E1000_PTC1522);
4603 adapter->stats.mptc += rd32(E1000_MPTC);
4604 adapter->stats.bptc += rd32(E1000_BPTC);
4606 adapter->stats.tpt += rd32(E1000_TPT);
4607 adapter->stats.colc += rd32(E1000_COLC);
4609 adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
4610 /* read internal phy specific stats */
4611 reg = rd32(E1000_CTRL_EXT);
4612 if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
4613 adapter->stats.rxerrc += rd32(E1000_RXERRC);
4614 adapter->stats.tncrs += rd32(E1000_TNCRS);
4617 adapter->stats.tsctc += rd32(E1000_TSCTC);
4618 adapter->stats.tsctfc += rd32(E1000_TSCTFC);
4620 adapter->stats.iac += rd32(E1000_IAC);
4621 adapter->stats.icrxoc += rd32(E1000_ICRXOC);
4622 adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
4623 adapter->stats.icrxatc += rd32(E1000_ICRXATC);
4624 adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
4625 adapter->stats.ictxatc += rd32(E1000_ICTXATC);
4626 adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
4627 adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
4628 adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
4630 /* Fill out the OS statistics structure */
4631 net_stats->multicast = adapter->stats.mprc;
4632 net_stats->collisions = adapter->stats.colc;
4634 /* Rx Errors */
4636 /* RLEC on some newer hardware can be incorrect so build
4637 * our own version based on RUC and ROC */
4638 net_stats->rx_errors = adapter->stats.rxerrc +
4639 adapter->stats.crcerrs + adapter->stats.algnerrc +
4640 adapter->stats.ruc + adapter->stats.roc +
4641 adapter->stats.cexterr;
4642 net_stats->rx_length_errors = adapter->stats.ruc +
4643 adapter->stats.roc;
4644 net_stats->rx_crc_errors = adapter->stats.crcerrs;
4645 net_stats->rx_frame_errors = adapter->stats.algnerrc;
4646 net_stats->rx_missed_errors = adapter->stats.mpc;
4648 /* Tx Errors */
4649 net_stats->tx_errors = adapter->stats.ecol +
4650 adapter->stats.latecol;
4651 net_stats->tx_aborted_errors = adapter->stats.ecol;
4652 net_stats->tx_window_errors = adapter->stats.latecol;
4653 net_stats->tx_carrier_errors = adapter->stats.tncrs;
4655 /* Tx Dropped needs to be maintained elsewhere */
4657 /* Phy Stats */
4658 if (hw->phy.media_type == e1000_media_type_copper) {
4659 if ((adapter->link_speed == SPEED_1000) &&
4660 (!igb_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
4661 phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
4662 adapter->phy_stats.idle_errors += phy_tmp;
4666 /* Management Stats */
4667 adapter->stats.mgptc += rd32(E1000_MGTPTC);
4668 adapter->stats.mgprc += rd32(E1000_MGTPRC);
4669 adapter->stats.mgpdc += rd32(E1000_MGTPDC);
4671 /* OS2BMC Stats */
4672 reg = rd32(E1000_MANC);
4673 if (reg & E1000_MANC_EN_BMC2OS) {
4674 adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
4675 adapter->stats.o2bspc += rd32(E1000_O2BSPC);
4676 adapter->stats.b2ospc += rd32(E1000_B2OSPC);
4677 adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
4681 static irqreturn_t igb_msix_other(int irq, void *data)
4683 struct igb_adapter *adapter = data;
4684 struct e1000_hw *hw = &adapter->hw;
4685 u32 icr = rd32(E1000_ICR);
4686 /* reading ICR causes bit 31 of EICR to be cleared */
4688 if (icr & E1000_ICR_DRSTA)
4689 schedule_work(&adapter->reset_task);
4691 if (icr & E1000_ICR_DOUTSYNC) {
4692 /* HW is reporting DMA is out of sync */
4693 adapter->stats.doosync++;
4694 /* The DMA Out of Sync is also indication of a spoof event
4695 * in IOV mode. Check the Wrong VM Behavior register to
4696 * see if it is really a spoof event. */
4697 igb_check_wvbr(adapter);
4700 /* Check for a mailbox event */
4701 if (icr & E1000_ICR_VMMB)
4702 igb_msg_task(adapter);
4704 if (icr & E1000_ICR_LSC) {
4705 hw->mac.get_link_status = 1;
4706 /* guard against interrupt when we're going down */
4707 if (!test_bit(__IGB_DOWN, &adapter->state))
4708 mod_timer(&adapter->watchdog_timer, jiffies + 1);
4711 if (adapter->vfs_allocated_count)
4712 wr32(E1000_IMS, E1000_IMS_LSC |
4713 E1000_IMS_VMMB |
4714 E1000_IMS_DOUTSYNC);
4715 else
4716 wr32(E1000_IMS, E1000_IMS_LSC | E1000_IMS_DOUTSYNC);
4717 wr32(E1000_EIMS, adapter->eims_other);
4719 return IRQ_HANDLED;
4722 static void igb_write_itr(struct igb_q_vector *q_vector)
4724 struct igb_adapter *adapter = q_vector->adapter;
4725 u32 itr_val = q_vector->itr_val & 0x7FFC;
4727 if (!q_vector->set_itr)
4728 return;
4730 if (!itr_val)
4731 itr_val = 0x4;
4733 if (adapter->hw.mac.type == e1000_82575)
4734 itr_val |= itr_val << 16;
4735 else
4736 itr_val |= 0x8000000;
4738 writel(itr_val, q_vector->itr_register);
4739 q_vector->set_itr = 0;
4742 static irqreturn_t igb_msix_ring(int irq, void *data)
4744 struct igb_q_vector *q_vector = data;
4746 /* Write the ITR value calculated from the previous interrupt. */
4747 igb_write_itr(q_vector);
4749 napi_schedule(&q_vector->napi);
4751 return IRQ_HANDLED;
4754 #ifdef CONFIG_IGB_DCA
4755 static void igb_update_dca(struct igb_q_vector *q_vector)
4757 struct igb_adapter *adapter = q_vector->adapter;
4758 struct e1000_hw *hw = &adapter->hw;
4759 int cpu = get_cpu();
4761 if (q_vector->cpu == cpu)
4762 goto out_no_update;
4764 if (q_vector->tx_ring) {
4765 int q = q_vector->tx_ring->reg_idx;
4766 u32 dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
4767 if (hw->mac.type == e1000_82575) {
4768 dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
4769 dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
4770 } else {
4771 dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
4772 dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
4773 E1000_DCA_TXCTRL_CPUID_SHIFT;
4775 dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
4776 wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
4778 if (q_vector->rx_ring) {
4779 int q = q_vector->rx_ring->reg_idx;
4780 u32 dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
4781 if (hw->mac.type == e1000_82575) {
4782 dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
4783 dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
4784 } else {
4785 dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576;
4786 dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
4787 E1000_DCA_RXCTRL_CPUID_SHIFT;
4789 dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN;
4790 dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN;
4791 dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN;
4792 wr32(E1000_DCA_RXCTRL(q), dca_rxctrl);
4794 q_vector->cpu = cpu;
4795 out_no_update:
4796 put_cpu();
4799 static void igb_setup_dca(struct igb_adapter *adapter)
4801 struct e1000_hw *hw = &adapter->hw;
4802 int i;
4804 if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
4805 return;
4807 /* Always use CB2 mode, difference is masked in the CB driver. */
4808 wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
4810 for (i = 0; i < adapter->num_q_vectors; i++) {
4811 adapter->q_vector[i]->cpu = -1;
4812 igb_update_dca(adapter->q_vector[i]);
4816 static int __igb_notify_dca(struct device *dev, void *data)
4818 struct net_device *netdev = dev_get_drvdata(dev);
4819 struct igb_adapter *adapter = netdev_priv(netdev);
4820 struct pci_dev *pdev = adapter->pdev;
4821 struct e1000_hw *hw = &adapter->hw;
4822 unsigned long event = *(unsigned long *)data;
4824 switch (event) {
4825 case DCA_PROVIDER_ADD:
4826 /* if already enabled, don't do it again */
4827 if (adapter->flags & IGB_FLAG_DCA_ENABLED)
4828 break;
4829 if (dca_add_requester(dev) == 0) {
4830 adapter->flags |= IGB_FLAG_DCA_ENABLED;
4831 dev_info(&pdev->dev, "DCA enabled\n");
4832 igb_setup_dca(adapter);
4833 break;
4835 /* Fall Through since DCA is disabled. */
4836 case DCA_PROVIDER_REMOVE:
4837 if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
4838 /* without this a class_device is left
4839 * hanging around in the sysfs model */
4840 dca_remove_requester(dev);
4841 dev_info(&pdev->dev, "DCA disabled\n");
4842 adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
4843 wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
4845 break;
4848 return 0;
4851 static int igb_notify_dca(struct notifier_block *nb, unsigned long event,
4852 void *p)
4854 int ret_val;
4856 ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event,
4857 __igb_notify_dca);
4859 return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
4861 #endif /* CONFIG_IGB_DCA */
4863 static void igb_ping_all_vfs(struct igb_adapter *adapter)
4865 struct e1000_hw *hw = &adapter->hw;
4866 u32 ping;
4867 int i;
4869 for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
4870 ping = E1000_PF_CONTROL_MSG;
4871 if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
4872 ping |= E1000_VT_MSGTYPE_CTS;
4873 igb_write_mbx(hw, &ping, 1, i);
4877 static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
4879 struct e1000_hw *hw = &adapter->hw;
4880 u32 vmolr = rd32(E1000_VMOLR(vf));
4881 struct vf_data_storage *vf_data = &adapter->vf_data[vf];
4883 vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC |
4884 IGB_VF_FLAG_MULTI_PROMISC);
4885 vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
4887 if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
4888 vmolr |= E1000_VMOLR_MPME;
4889 vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC;
4890 *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
4891 } else {
4893 * if we have hashes and we are clearing a multicast promisc
4894 * flag we need to write the hashes to the MTA as this step
4895 * was previously skipped
4897 if (vf_data->num_vf_mc_hashes > 30) {
4898 vmolr |= E1000_VMOLR_MPME;
4899 } else if (vf_data->num_vf_mc_hashes) {
4900 int j;
4901 vmolr |= E1000_VMOLR_ROMPE;
4902 for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
4903 igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
4907 wr32(E1000_VMOLR(vf), vmolr);
4909 /* there are flags left unprocessed, likely not supported */
4910 if (*msgbuf & E1000_VT_MSGINFO_MASK)
4911 return -EINVAL;
4913 return 0;
4917 static int igb_set_vf_multicasts(struct igb_adapter *adapter,
4918 u32 *msgbuf, u32 vf)
4920 int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
4921 u16 *hash_list = (u16 *)&msgbuf[1];
4922 struct vf_data_storage *vf_data = &adapter->vf_data[vf];
4923 int i;
4925 /* salt away the number of multicast addresses assigned
4926 * to this VF for later use to restore when the PF multi cast
4927 * list changes
4929 vf_data->num_vf_mc_hashes = n;
4931 /* only up to 30 hash values supported */
4932 if (n > 30)
4933 n = 30;
4935 /* store the hashes for later use */
4936 for (i = 0; i < n; i++)
4937 vf_data->vf_mc_hashes[i] = hash_list[i];
4939 /* Flush and reset the mta with the new values */
4940 igb_set_rx_mode(adapter->netdev);
4942 return 0;
4945 static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
4947 struct e1000_hw *hw = &adapter->hw;
4948 struct vf_data_storage *vf_data;
4949 int i, j;
4951 for (i = 0; i < adapter->vfs_allocated_count; i++) {
4952 u32 vmolr = rd32(E1000_VMOLR(i));
4953 vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
4955 vf_data = &adapter->vf_data[i];
4957 if ((vf_data->num_vf_mc_hashes > 30) ||
4958 (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
4959 vmolr |= E1000_VMOLR_MPME;
4960 } else if (vf_data->num_vf_mc_hashes) {
4961 vmolr |= E1000_VMOLR_ROMPE;
4962 for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
4963 igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
4965 wr32(E1000_VMOLR(i), vmolr);
4969 static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
4971 struct e1000_hw *hw = &adapter->hw;
4972 u32 pool_mask, reg, vid;
4973 int i;
4975 pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
4977 /* Find the vlan filter for this id */
4978 for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
4979 reg = rd32(E1000_VLVF(i));
4981 /* remove the vf from the pool */
4982 reg &= ~pool_mask;
4984 /* if pool is empty then remove entry from vfta */
4985 if (!(reg & E1000_VLVF_POOLSEL_MASK) &&
4986 (reg & E1000_VLVF_VLANID_ENABLE)) {
4987 reg = 0;
4988 vid = reg & E1000_VLVF_VLANID_MASK;
4989 igb_vfta_set(hw, vid, false);
4992 wr32(E1000_VLVF(i), reg);
4995 adapter->vf_data[vf].vlans_enabled = 0;
4998 static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
5000 struct e1000_hw *hw = &adapter->hw;
5001 u32 reg, i;
5003 /* The vlvf table only exists on 82576 hardware and newer */
5004 if (hw->mac.type < e1000_82576)
5005 return -1;
5007 /* we only need to do this if VMDq is enabled */
5008 if (!adapter->vfs_allocated_count)
5009 return -1;
5011 /* Find the vlan filter for this id */
5012 for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
5013 reg = rd32(E1000_VLVF(i));
5014 if ((reg & E1000_VLVF_VLANID_ENABLE) &&
5015 vid == (reg & E1000_VLVF_VLANID_MASK))
5016 break;
5019 if (add) {
5020 if (i == E1000_VLVF_ARRAY_SIZE) {
5021 /* Did not find a matching VLAN ID entry that was
5022 * enabled. Search for a free filter entry, i.e.
5023 * one without the enable bit set
5025 for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
5026 reg = rd32(E1000_VLVF(i));
5027 if (!(reg & E1000_VLVF_VLANID_ENABLE))
5028 break;
5031 if (i < E1000_VLVF_ARRAY_SIZE) {
5032 /* Found an enabled/available entry */
5033 reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
5035 /* if !enabled we need to set this up in vfta */
5036 if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
5037 /* add VID to filter table */
5038 igb_vfta_set(hw, vid, true);
5039 reg |= E1000_VLVF_VLANID_ENABLE;
5041 reg &= ~E1000_VLVF_VLANID_MASK;
5042 reg |= vid;
5043 wr32(E1000_VLVF(i), reg);
5045 /* do not modify RLPML for PF devices */
5046 if (vf >= adapter->vfs_allocated_count)
5047 return 0;
5049 if (!adapter->vf_data[vf].vlans_enabled) {
5050 u32 size;
5051 reg = rd32(E1000_VMOLR(vf));
5052 size = reg & E1000_VMOLR_RLPML_MASK;
5053 size += 4;
5054 reg &= ~E1000_VMOLR_RLPML_MASK;
5055 reg |= size;
5056 wr32(E1000_VMOLR(vf), reg);
5059 adapter->vf_data[vf].vlans_enabled++;
5060 return 0;
5062 } else {
5063 if (i < E1000_VLVF_ARRAY_SIZE) {
5064 /* remove vf from the pool */
5065 reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf));
5066 /* if pool is empty then remove entry from vfta */
5067 if (!(reg & E1000_VLVF_POOLSEL_MASK)) {
5068 reg = 0;
5069 igb_vfta_set(hw, vid, false);
5071 wr32(E1000_VLVF(i), reg);
5073 /* do not modify RLPML for PF devices */
5074 if (vf >= adapter->vfs_allocated_count)
5075 return 0;
5077 adapter->vf_data[vf].vlans_enabled--;
5078 if (!adapter->vf_data[vf].vlans_enabled) {
5079 u32 size;
5080 reg = rd32(E1000_VMOLR(vf));
5081 size = reg & E1000_VMOLR_RLPML_MASK;
5082 size -= 4;
5083 reg &= ~E1000_VMOLR_RLPML_MASK;
5084 reg |= size;
5085 wr32(E1000_VMOLR(vf), reg);
5089 return 0;
5092 static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
5094 struct e1000_hw *hw = &adapter->hw;
5096 if (vid)
5097 wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
5098 else
5099 wr32(E1000_VMVIR(vf), 0);
5102 static int igb_ndo_set_vf_vlan(struct net_device *netdev,
5103 int vf, u16 vlan, u8 qos)
5105 int err = 0;
5106 struct igb_adapter *adapter = netdev_priv(netdev);
5108 if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
5109 return -EINVAL;
5110 if (vlan || qos) {
5111 err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
5112 if (err)
5113 goto out;
5114 igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
5115 igb_set_vmolr(adapter, vf, !vlan);
5116 adapter->vf_data[vf].pf_vlan = vlan;
5117 adapter->vf_data[vf].pf_qos = qos;
5118 dev_info(&adapter->pdev->dev,
5119 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
5120 if (test_bit(__IGB_DOWN, &adapter->state)) {
5121 dev_warn(&adapter->pdev->dev,
5122 "The VF VLAN has been set,"
5123 " but the PF device is not up.\n");
5124 dev_warn(&adapter->pdev->dev,
5125 "Bring the PF device up before"
5126 " attempting to use the VF device.\n");
5128 } else {
5129 igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
5130 false, vf);
5131 igb_set_vmvir(adapter, vlan, vf);
5132 igb_set_vmolr(adapter, vf, true);
5133 adapter->vf_data[vf].pf_vlan = 0;
5134 adapter->vf_data[vf].pf_qos = 0;
5136 out:
5137 return err;
5140 static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
5142 int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
5143 int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
5145 return igb_vlvf_set(adapter, vid, add, vf);
5148 static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
5150 /* clear flags - except flag that indicates PF has set the MAC */
5151 adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
5152 adapter->vf_data[vf].last_nack = jiffies;
5154 /* reset offloads to defaults */
5155 igb_set_vmolr(adapter, vf, true);
5157 /* reset vlans for device */
5158 igb_clear_vf_vfta(adapter, vf);
5159 if (adapter->vf_data[vf].pf_vlan)
5160 igb_ndo_set_vf_vlan(adapter->netdev, vf,
5161 adapter->vf_data[vf].pf_vlan,
5162 adapter->vf_data[vf].pf_qos);
5163 else
5164 igb_clear_vf_vfta(adapter, vf);
5166 /* reset multicast table array for vf */
5167 adapter->vf_data[vf].num_vf_mc_hashes = 0;
5169 /* Flush and reset the mta with the new values */
5170 igb_set_rx_mode(adapter->netdev);
5173 static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
5175 unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
5177 /* generate a new mac address as we were hotplug removed/added */
5178 if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
5179 random_ether_addr(vf_mac);
5181 /* process remaining reset events */
5182 igb_vf_reset(adapter, vf);
5185 static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
5187 struct e1000_hw *hw = &adapter->hw;
5188 unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
5189 int rar_entry = hw->mac.rar_entry_count - (vf + 1);
5190 u32 reg, msgbuf[3];
5191 u8 *addr = (u8 *)(&msgbuf[1]);
5193 /* process all the same items cleared in a function level reset */
5194 igb_vf_reset(adapter, vf);
5196 /* set vf mac address */
5197 igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
5199 /* enable transmit and receive for vf */
5200 reg = rd32(E1000_VFTE);
5201 wr32(E1000_VFTE, reg | (1 << vf));
5202 reg = rd32(E1000_VFRE);
5203 wr32(E1000_VFRE, reg | (1 << vf));
5205 adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
5207 /* reply to reset with ack and vf mac address */
5208 msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
5209 memcpy(addr, vf_mac, 6);
5210 igb_write_mbx(hw, msgbuf, 3, vf);
5213 static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
5216 * The VF MAC Address is stored in a packed array of bytes
5217 * starting at the second 32 bit word of the msg array
5219 unsigned char *addr = (char *)&msg[1];
5220 int err = -1;
5222 if (is_valid_ether_addr(addr))
5223 err = igb_set_vf_mac(adapter, vf, addr);
5225 return err;
5228 static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
5230 struct e1000_hw *hw = &adapter->hw;
5231 struct vf_data_storage *vf_data = &adapter->vf_data[vf];
5232 u32 msg = E1000_VT_MSGTYPE_NACK;
5234 /* if device isn't clear to send it shouldn't be reading either */
5235 if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
5236 time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
5237 igb_write_mbx(hw, &msg, 1, vf);
5238 vf_data->last_nack = jiffies;
5242 static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
5244 struct pci_dev *pdev = adapter->pdev;
5245 u32 msgbuf[E1000_VFMAILBOX_SIZE];
5246 struct e1000_hw *hw = &adapter->hw;
5247 struct vf_data_storage *vf_data = &adapter->vf_data[vf];
5248 s32 retval;
5250 retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
5252 if (retval) {
5253 /* if receive failed revoke VF CTS stats and restart init */
5254 dev_err(&pdev->dev, "Error receiving message from VF\n");
5255 vf_data->flags &= ~IGB_VF_FLAG_CTS;
5256 if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
5257 return;
5258 goto out;
5261 /* this is a message we already processed, do nothing */
5262 if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
5263 return;
5266 * until the vf completes a reset it should not be
5267 * allowed to start any configuration.
5270 if (msgbuf[0] == E1000_VF_RESET) {
5271 igb_vf_reset_msg(adapter, vf);
5272 return;
5275 if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
5276 if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
5277 return;
5278 retval = -1;
5279 goto out;
5282 switch ((msgbuf[0] & 0xFFFF)) {
5283 case E1000_VF_SET_MAC_ADDR:
5284 retval = -EINVAL;
5285 if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
5286 retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
5287 else
5288 dev_warn(&pdev->dev,
5289 "VF %d attempted to override administratively "
5290 "set MAC address\nReload the VF driver to "
5291 "resume operations\n", vf);
5292 break;
5293 case E1000_VF_SET_PROMISC:
5294 retval = igb_set_vf_promisc(adapter, msgbuf, vf);
5295 break;
5296 case E1000_VF_SET_MULTICAST:
5297 retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
5298 break;
5299 case E1000_VF_SET_LPE:
5300 retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
5301 break;
5302 case E1000_VF_SET_VLAN:
5303 retval = -1;
5304 if (vf_data->pf_vlan)
5305 dev_warn(&pdev->dev,
5306 "VF %d attempted to override administratively "
5307 "set VLAN tag\nReload the VF driver to "
5308 "resume operations\n", vf);
5309 else
5310 retval = igb_set_vf_vlan(adapter, msgbuf, vf);
5311 break;
5312 default:
5313 dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
5314 retval = -1;
5315 break;
5318 msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
5319 out:
5320 /* notify the VF of the results of what it sent us */
5321 if (retval)
5322 msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
5323 else
5324 msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
5326 igb_write_mbx(hw, msgbuf, 1, vf);
5329 static void igb_msg_task(struct igb_adapter *adapter)
5331 struct e1000_hw *hw = &adapter->hw;
5332 u32 vf;
5334 for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
5335 /* process any reset requests */
5336 if (!igb_check_for_rst(hw, vf))
5337 igb_vf_reset_event(adapter, vf);
5339 /* process any messages pending */
5340 if (!igb_check_for_msg(hw, vf))
5341 igb_rcv_msg_from_vf(adapter, vf);
5343 /* process any acks */
5344 if (!igb_check_for_ack(hw, vf))
5345 igb_rcv_ack_from_vf(adapter, vf);
5350 * igb_set_uta - Set unicast filter table address
5351 * @adapter: board private structure
5353 * The unicast table address is a register array of 32-bit registers.
5354 * The table is meant to be used in a way similar to how the MTA is used
5355 * however due to certain limitations in the hardware it is necessary to
5356 * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
5357 * enable bit to allow vlan tag stripping when promiscuous mode is enabled
5359 static void igb_set_uta(struct igb_adapter *adapter)
5361 struct e1000_hw *hw = &adapter->hw;
5362 int i;
5364 /* The UTA table only exists on 82576 hardware and newer */
5365 if (hw->mac.type < e1000_82576)
5366 return;
5368 /* we only need to do this if VMDq is enabled */
5369 if (!adapter->vfs_allocated_count)
5370 return;
5372 for (i = 0; i < hw->mac.uta_reg_count; i++)
5373 array_wr32(E1000_UTA, i, ~0);
5377 * igb_intr_msi - Interrupt Handler
5378 * @irq: interrupt number
5379 * @data: pointer to a network interface device structure
5381 static irqreturn_t igb_intr_msi(int irq, void *data)
5383 struct igb_adapter *adapter = data;
5384 struct igb_q_vector *q_vector = adapter->q_vector[0];
5385 struct e1000_hw *hw = &adapter->hw;
5386 /* read ICR disables interrupts using IAM */
5387 u32 icr = rd32(E1000_ICR);
5389 igb_write_itr(q_vector);
5391 if (icr & E1000_ICR_DRSTA)
5392 schedule_work(&adapter->reset_task);
5394 if (icr & E1000_ICR_DOUTSYNC) {
5395 /* HW is reporting DMA is out of sync */
5396 adapter->stats.doosync++;
5399 if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
5400 hw->mac.get_link_status = 1;
5401 if (!test_bit(__IGB_DOWN, &adapter->state))
5402 mod_timer(&adapter->watchdog_timer, jiffies + 1);
5405 napi_schedule(&q_vector->napi);
5407 return IRQ_HANDLED;
5411 * igb_intr - Legacy Interrupt Handler
5412 * @irq: interrupt number
5413 * @data: pointer to a network interface device structure
5415 static irqreturn_t igb_intr(int irq, void *data)
5417 struct igb_adapter *adapter = data;
5418 struct igb_q_vector *q_vector = adapter->q_vector[0];
5419 struct e1000_hw *hw = &adapter->hw;
5420 /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
5421 * need for the IMC write */
5422 u32 icr = rd32(E1000_ICR);
5423 if (!icr)
5424 return IRQ_NONE; /* Not our interrupt */
5426 igb_write_itr(q_vector);
5428 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
5429 * not set, then the adapter didn't send an interrupt */
5430 if (!(icr & E1000_ICR_INT_ASSERTED))
5431 return IRQ_NONE;
5433 if (icr & E1000_ICR_DRSTA)
5434 schedule_work(&adapter->reset_task);
5436 if (icr & E1000_ICR_DOUTSYNC) {
5437 /* HW is reporting DMA is out of sync */
5438 adapter->stats.doosync++;
5441 if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
5442 hw->mac.get_link_status = 1;
5443 /* guard against interrupt when we're going down */
5444 if (!test_bit(__IGB_DOWN, &adapter->state))
5445 mod_timer(&adapter->watchdog_timer, jiffies + 1);
5448 napi_schedule(&q_vector->napi);
5450 return IRQ_HANDLED;
5453 static inline void igb_ring_irq_enable(struct igb_q_vector *q_vector)
5455 struct igb_adapter *adapter = q_vector->adapter;
5456 struct e1000_hw *hw = &adapter->hw;
5458 if ((q_vector->rx_ring && (adapter->rx_itr_setting & 3)) ||
5459 (!q_vector->rx_ring && (adapter->tx_itr_setting & 3))) {
5460 if (!adapter->msix_entries)
5461 igb_set_itr(adapter);
5462 else
5463 igb_update_ring_itr(q_vector);
5466 if (!test_bit(__IGB_DOWN, &adapter->state)) {
5467 if (adapter->msix_entries)
5468 wr32(E1000_EIMS, q_vector->eims_value);
5469 else
5470 igb_irq_enable(adapter);
5475 * igb_poll - NAPI Rx polling callback
5476 * @napi: napi polling structure
5477 * @budget: count of how many packets we should handle
5479 static int igb_poll(struct napi_struct *napi, int budget)
5481 struct igb_q_vector *q_vector = container_of(napi,
5482 struct igb_q_vector,
5483 napi);
5484 int tx_clean_complete = 1, work_done = 0;
5486 #ifdef CONFIG_IGB_DCA
5487 if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
5488 igb_update_dca(q_vector);
5489 #endif
5490 if (q_vector->tx_ring)
5491 tx_clean_complete = igb_clean_tx_irq(q_vector);
5493 if (q_vector->rx_ring)
5494 igb_clean_rx_irq_adv(q_vector, &work_done, budget);
5496 if (!tx_clean_complete)
5497 work_done = budget;
5499 /* If not enough Rx work done, exit the polling mode */
5500 if (work_done < budget) {
5501 napi_complete(napi);
5502 igb_ring_irq_enable(q_vector);
5505 return work_done;
5509 * igb_systim_to_hwtstamp - convert system time value to hw timestamp
5510 * @adapter: board private structure
5511 * @shhwtstamps: timestamp structure to update
5512 * @regval: unsigned 64bit system time value.
5514 * We need to convert the system time value stored in the RX/TXSTMP registers
5515 * into a hwtstamp which can be used by the upper level timestamping functions
5517 static void igb_systim_to_hwtstamp(struct igb_adapter *adapter,
5518 struct skb_shared_hwtstamps *shhwtstamps,
5519 u64 regval)
5521 u64 ns;
5524 * The 82580 starts with 1ns at bit 0 in RX/TXSTMPL, shift this up to
5525 * 24 to match clock shift we setup earlier.
5527 if (adapter->hw.mac.type == e1000_82580)
5528 regval <<= IGB_82580_TSYNC_SHIFT;
5530 ns = timecounter_cyc2time(&adapter->clock, regval);
5531 timecompare_update(&adapter->compare, ns);
5532 memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
5533 shhwtstamps->hwtstamp = ns_to_ktime(ns);
5534 shhwtstamps->syststamp = timecompare_transform(&adapter->compare, ns);
5538 * igb_tx_hwtstamp - utility function which checks for TX time stamp
5539 * @q_vector: pointer to q_vector containing needed info
5540 * @buffer: pointer to igb_buffer structure
5542 * If we were asked to do hardware stamping and such a time stamp is
5543 * available, then it must have been for this skb here because we only
5544 * allow only one such packet into the queue.
5546 static void igb_tx_hwtstamp(struct igb_q_vector *q_vector, struct igb_buffer *buffer_info)
5548 struct igb_adapter *adapter = q_vector->adapter;
5549 struct e1000_hw *hw = &adapter->hw;
5550 struct skb_shared_hwtstamps shhwtstamps;
5551 u64 regval;
5553 /* if skb does not support hw timestamp or TX stamp not valid exit */
5554 if (likely(!(buffer_info->tx_flags & SKBTX_HW_TSTAMP)) ||
5555 !(rd32(E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID))
5556 return;
5558 regval = rd32(E1000_TXSTMPL);
5559 regval |= (u64)rd32(E1000_TXSTMPH) << 32;
5561 igb_systim_to_hwtstamp(adapter, &shhwtstamps, regval);
5562 skb_tstamp_tx(buffer_info->skb, &shhwtstamps);
5566 * igb_clean_tx_irq - Reclaim resources after transmit completes
5567 * @q_vector: pointer to q_vector containing needed info
5568 * returns true if ring is completely cleaned
5570 static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
5572 struct igb_adapter *adapter = q_vector->adapter;
5573 struct igb_ring *tx_ring = q_vector->tx_ring;
5574 struct net_device *netdev = tx_ring->netdev;
5575 struct e1000_hw *hw = &adapter->hw;
5576 struct igb_buffer *buffer_info;
5577 union e1000_adv_tx_desc *tx_desc, *eop_desc;
5578 unsigned int total_bytes = 0, total_packets = 0;
5579 unsigned int i, eop, count = 0;
5580 bool cleaned = false;
5582 i = tx_ring->next_to_clean;
5583 eop = tx_ring->buffer_info[i].next_to_watch;
5584 eop_desc = E1000_TX_DESC_ADV(*tx_ring, eop);
5586 while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
5587 (count < tx_ring->count)) {
5588 rmb(); /* read buffer_info after eop_desc status */
5589 for (cleaned = false; !cleaned; count++) {
5590 tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
5591 buffer_info = &tx_ring->buffer_info[i];
5592 cleaned = (i == eop);
5594 if (buffer_info->skb) {
5595 total_bytes += buffer_info->bytecount;
5596 /* gso_segs is currently only valid for tcp */
5597 total_packets += buffer_info->gso_segs;
5598 igb_tx_hwtstamp(q_vector, buffer_info);
5601 igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
5602 tx_desc->wb.status = 0;
5604 i++;
5605 if (i == tx_ring->count)
5606 i = 0;
5608 eop = tx_ring->buffer_info[i].next_to_watch;
5609 eop_desc = E1000_TX_DESC_ADV(*tx_ring, eop);
5612 tx_ring->next_to_clean = i;
5614 if (unlikely(count &&
5615 netif_carrier_ok(netdev) &&
5616 igb_desc_unused(tx_ring) >= IGB_TX_QUEUE_WAKE)) {
5617 /* Make sure that anybody stopping the queue after this
5618 * sees the new next_to_clean.
5620 smp_mb();
5621 if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
5622 !(test_bit(__IGB_DOWN, &adapter->state))) {
5623 netif_wake_subqueue(netdev, tx_ring->queue_index);
5625 u64_stats_update_begin(&tx_ring->tx_syncp);
5626 tx_ring->tx_stats.restart_queue++;
5627 u64_stats_update_end(&tx_ring->tx_syncp);
5631 if (tx_ring->detect_tx_hung) {
5632 /* Detect a transmit hang in hardware, this serializes the
5633 * check with the clearing of time_stamp and movement of i */
5634 tx_ring->detect_tx_hung = false;
5635 if (tx_ring->buffer_info[i].time_stamp &&
5636 time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
5637 (adapter->tx_timeout_factor * HZ)) &&
5638 !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
5640 /* detected Tx unit hang */
5641 dev_err(tx_ring->dev,
5642 "Detected Tx Unit Hang\n"
5643 " Tx Queue <%d>\n"
5644 " TDH <%x>\n"
5645 " TDT <%x>\n"
5646 " next_to_use <%x>\n"
5647 " next_to_clean <%x>\n"
5648 "buffer_info[next_to_clean]\n"
5649 " time_stamp <%lx>\n"
5650 " next_to_watch <%x>\n"
5651 " jiffies <%lx>\n"
5652 " desc.status <%x>\n",
5653 tx_ring->queue_index,
5654 readl(tx_ring->head),
5655 readl(tx_ring->tail),
5656 tx_ring->next_to_use,
5657 tx_ring->next_to_clean,
5658 tx_ring->buffer_info[eop].time_stamp,
5659 eop,
5660 jiffies,
5661 eop_desc->wb.status);
5662 netif_stop_subqueue(netdev, tx_ring->queue_index);
5665 tx_ring->total_bytes += total_bytes;
5666 tx_ring->total_packets += total_packets;
5667 u64_stats_update_begin(&tx_ring->tx_syncp);
5668 tx_ring->tx_stats.bytes += total_bytes;
5669 tx_ring->tx_stats.packets += total_packets;
5670 u64_stats_update_end(&tx_ring->tx_syncp);
5671 return count < tx_ring->count;
5675 * igb_receive_skb - helper function to handle rx indications
5676 * @q_vector: structure containing interrupt and ring information
5677 * @skb: packet to send up
5678 * @vlan_tag: vlan tag for packet
5680 static void igb_receive_skb(struct igb_q_vector *q_vector,
5681 struct sk_buff *skb,
5682 u16 vlan_tag)
5684 struct igb_adapter *adapter = q_vector->adapter;
5686 if (vlan_tag && adapter->vlgrp)
5687 vlan_gro_receive(&q_vector->napi, adapter->vlgrp,
5688 vlan_tag, skb);
5689 else
5690 napi_gro_receive(&q_vector->napi, skb);
5693 static inline void igb_rx_checksum_adv(struct igb_ring *ring,
5694 u32 status_err, struct sk_buff *skb)
5696 skb_checksum_none_assert(skb);
5698 /* Ignore Checksum bit is set or checksum is disabled through ethtool */
5699 if (!(ring->flags & IGB_RING_FLAG_RX_CSUM) ||
5700 (status_err & E1000_RXD_STAT_IXSM))
5701 return;
5703 /* TCP/UDP checksum error bit is set */
5704 if (status_err &
5705 (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
5707 * work around errata with sctp packets where the TCPE aka
5708 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
5709 * packets, (aka let the stack check the crc32c)
5711 if ((skb->len == 60) &&
5712 (ring->flags & IGB_RING_FLAG_RX_SCTP_CSUM)) {
5713 u64_stats_update_begin(&ring->rx_syncp);
5714 ring->rx_stats.csum_err++;
5715 u64_stats_update_end(&ring->rx_syncp);
5717 /* let the stack verify checksum errors */
5718 return;
5720 /* It must be a TCP or UDP packet with a valid checksum */
5721 if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
5722 skb->ip_summed = CHECKSUM_UNNECESSARY;
5724 dev_dbg(ring->dev, "cksum success: bits %08X\n", status_err);
5727 static void igb_rx_hwtstamp(struct igb_q_vector *q_vector, u32 staterr,
5728 struct sk_buff *skb)
5730 struct igb_adapter *adapter = q_vector->adapter;
5731 struct e1000_hw *hw = &adapter->hw;
5732 u64 regval;
5735 * If this bit is set, then the RX registers contain the time stamp. No
5736 * other packet will be time stamped until we read these registers, so
5737 * read the registers to make them available again. Because only one
5738 * packet can be time stamped at a time, we know that the register
5739 * values must belong to this one here and therefore we don't need to
5740 * compare any of the additional attributes stored for it.
5742 * If nothing went wrong, then it should have a shared tx_flags that we
5743 * can turn into a skb_shared_hwtstamps.
5745 if (staterr & E1000_RXDADV_STAT_TSIP) {
5746 u32 *stamp = (u32 *)skb->data;
5747 regval = le32_to_cpu(*(stamp + 2));
5748 regval |= (u64)le32_to_cpu(*(stamp + 3)) << 32;
5749 skb_pull(skb, IGB_TS_HDR_LEN);
5750 } else {
5751 if(!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
5752 return;
5754 regval = rd32(E1000_RXSTMPL);
5755 regval |= (u64)rd32(E1000_RXSTMPH) << 32;
5758 igb_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
5760 static inline u16 igb_get_hlen(struct igb_ring *rx_ring,
5761 union e1000_adv_rx_desc *rx_desc)
5763 /* HW will not DMA in data larger than the given buffer, even if it
5764 * parses the (NFS, of course) header to be larger. In that case, it
5765 * fills the header buffer and spills the rest into the page.
5767 u16 hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
5768 E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
5769 if (hlen > rx_ring->rx_buffer_len)
5770 hlen = rx_ring->rx_buffer_len;
5771 return hlen;
5774 static bool igb_clean_rx_irq_adv(struct igb_q_vector *q_vector,
5775 int *work_done, int budget)
5777 struct igb_ring *rx_ring = q_vector->rx_ring;
5778 struct net_device *netdev = rx_ring->netdev;
5779 struct device *dev = rx_ring->dev;
5780 union e1000_adv_rx_desc *rx_desc , *next_rxd;
5781 struct igb_buffer *buffer_info , *next_buffer;
5782 struct sk_buff *skb;
5783 bool cleaned = false;
5784 int cleaned_count = 0;
5785 int current_node = numa_node_id();
5786 unsigned int total_bytes = 0, total_packets = 0;
5787 unsigned int i;
5788 u32 staterr;
5789 u16 length;
5790 u16 vlan_tag;
5792 i = rx_ring->next_to_clean;
5793 buffer_info = &rx_ring->buffer_info[i];
5794 rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
5795 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
5797 while (staterr & E1000_RXD_STAT_DD) {
5798 if (*work_done >= budget)
5799 break;
5800 (*work_done)++;
5801 rmb(); /* read descriptor and rx_buffer_info after status DD */
5803 skb = buffer_info->skb;
5804 prefetch(skb->data - NET_IP_ALIGN);
5805 buffer_info->skb = NULL;
5807 i++;
5808 if (i == rx_ring->count)
5809 i = 0;
5811 next_rxd = E1000_RX_DESC_ADV(*rx_ring, i);
5812 prefetch(next_rxd);
5813 next_buffer = &rx_ring->buffer_info[i];
5815 length = le16_to_cpu(rx_desc->wb.upper.length);
5816 cleaned = true;
5817 cleaned_count++;
5819 if (buffer_info->dma) {
5820 dma_unmap_single(dev, buffer_info->dma,
5821 rx_ring->rx_buffer_len,
5822 DMA_FROM_DEVICE);
5823 buffer_info->dma = 0;
5824 if (rx_ring->rx_buffer_len >= IGB_RXBUFFER_1024) {
5825 skb_put(skb, length);
5826 goto send_up;
5828 skb_put(skb, igb_get_hlen(rx_ring, rx_desc));
5831 if (length) {
5832 dma_unmap_page(dev, buffer_info->page_dma,
5833 PAGE_SIZE / 2, DMA_FROM_DEVICE);
5834 buffer_info->page_dma = 0;
5836 skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
5837 buffer_info->page,
5838 buffer_info->page_offset,
5839 length);
5841 if ((page_count(buffer_info->page) != 1) ||
5842 (page_to_nid(buffer_info->page) != current_node))
5843 buffer_info->page = NULL;
5844 else
5845 get_page(buffer_info->page);
5847 skb->len += length;
5848 skb->data_len += length;
5849 skb->truesize += length;
5852 if (!(staterr & E1000_RXD_STAT_EOP)) {
5853 buffer_info->skb = next_buffer->skb;
5854 buffer_info->dma = next_buffer->dma;
5855 next_buffer->skb = skb;
5856 next_buffer->dma = 0;
5857 goto next_desc;
5859 send_up:
5860 if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
5861 dev_kfree_skb_irq(skb);
5862 goto next_desc;
5865 if (staterr & (E1000_RXDADV_STAT_TSIP | E1000_RXDADV_STAT_TS))
5866 igb_rx_hwtstamp(q_vector, staterr, skb);
5867 total_bytes += skb->len;
5868 total_packets++;
5870 igb_rx_checksum_adv(rx_ring, staterr, skb);
5872 skb->protocol = eth_type_trans(skb, netdev);
5873 skb_record_rx_queue(skb, rx_ring->queue_index);
5875 vlan_tag = ((staterr & E1000_RXD_STAT_VP) ?
5876 le16_to_cpu(rx_desc->wb.upper.vlan) : 0);
5878 igb_receive_skb(q_vector, skb, vlan_tag);
5880 next_desc:
5881 rx_desc->wb.upper.status_error = 0;
5883 /* return some buffers to hardware, one at a time is too slow */
5884 if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
5885 igb_alloc_rx_buffers_adv(rx_ring, cleaned_count);
5886 cleaned_count = 0;
5889 /* use prefetched values */
5890 rx_desc = next_rxd;
5891 buffer_info = next_buffer;
5892 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
5895 rx_ring->next_to_clean = i;
5896 cleaned_count = igb_desc_unused(rx_ring);
5898 if (cleaned_count)
5899 igb_alloc_rx_buffers_adv(rx_ring, cleaned_count);
5901 rx_ring->total_packets += total_packets;
5902 rx_ring->total_bytes += total_bytes;
5903 u64_stats_update_begin(&rx_ring->rx_syncp);
5904 rx_ring->rx_stats.packets += total_packets;
5905 rx_ring->rx_stats.bytes += total_bytes;
5906 u64_stats_update_end(&rx_ring->rx_syncp);
5907 return cleaned;
5911 * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split
5912 * @adapter: address of board private structure
5914 void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring, int cleaned_count)
5916 struct net_device *netdev = rx_ring->netdev;
5917 union e1000_adv_rx_desc *rx_desc;
5918 struct igb_buffer *buffer_info;
5919 struct sk_buff *skb;
5920 unsigned int i;
5921 int bufsz;
5923 i = rx_ring->next_to_use;
5924 buffer_info = &rx_ring->buffer_info[i];
5926 bufsz = rx_ring->rx_buffer_len;
5928 while (cleaned_count--) {
5929 rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
5931 if ((bufsz < IGB_RXBUFFER_1024) && !buffer_info->page_dma) {
5932 if (!buffer_info->page) {
5933 buffer_info->page = netdev_alloc_page(netdev);
5934 if (unlikely(!buffer_info->page)) {
5935 u64_stats_update_begin(&rx_ring->rx_syncp);
5936 rx_ring->rx_stats.alloc_failed++;
5937 u64_stats_update_end(&rx_ring->rx_syncp);
5938 goto no_buffers;
5940 buffer_info->page_offset = 0;
5941 } else {
5942 buffer_info->page_offset ^= PAGE_SIZE / 2;
5944 buffer_info->page_dma =
5945 dma_map_page(rx_ring->dev, buffer_info->page,
5946 buffer_info->page_offset,
5947 PAGE_SIZE / 2,
5948 DMA_FROM_DEVICE);
5949 if (dma_mapping_error(rx_ring->dev,
5950 buffer_info->page_dma)) {
5951 buffer_info->page_dma = 0;
5952 u64_stats_update_begin(&rx_ring->rx_syncp);
5953 rx_ring->rx_stats.alloc_failed++;
5954 u64_stats_update_end(&rx_ring->rx_syncp);
5955 goto no_buffers;
5959 skb = buffer_info->skb;
5960 if (!skb) {
5961 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
5962 if (unlikely(!skb)) {
5963 u64_stats_update_begin(&rx_ring->rx_syncp);
5964 rx_ring->rx_stats.alloc_failed++;
5965 u64_stats_update_end(&rx_ring->rx_syncp);
5966 goto no_buffers;
5969 buffer_info->skb = skb;
5971 if (!buffer_info->dma) {
5972 buffer_info->dma = dma_map_single(rx_ring->dev,
5973 skb->data,
5974 bufsz,
5975 DMA_FROM_DEVICE);
5976 if (dma_mapping_error(rx_ring->dev,
5977 buffer_info->dma)) {
5978 buffer_info->dma = 0;
5979 u64_stats_update_begin(&rx_ring->rx_syncp);
5980 rx_ring->rx_stats.alloc_failed++;
5981 u64_stats_update_end(&rx_ring->rx_syncp);
5982 goto no_buffers;
5985 /* Refresh the desc even if buffer_addrs didn't change because
5986 * each write-back erases this info. */
5987 if (bufsz < IGB_RXBUFFER_1024) {
5988 rx_desc->read.pkt_addr =
5989 cpu_to_le64(buffer_info->page_dma);
5990 rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
5991 } else {
5992 rx_desc->read.pkt_addr = cpu_to_le64(buffer_info->dma);
5993 rx_desc->read.hdr_addr = 0;
5996 i++;
5997 if (i == rx_ring->count)
5998 i = 0;
5999 buffer_info = &rx_ring->buffer_info[i];
6002 no_buffers:
6003 if (rx_ring->next_to_use != i) {
6004 rx_ring->next_to_use = i;
6005 if (i == 0)
6006 i = (rx_ring->count - 1);
6007 else
6008 i--;
6010 /* Force memory writes to complete before letting h/w
6011 * know there are new descriptors to fetch. (Only
6012 * applicable for weak-ordered memory model archs,
6013 * such as IA-64). */
6014 wmb();
6015 writel(i, rx_ring->tail);
6020 * igb_mii_ioctl -
6021 * @netdev:
6022 * @ifreq:
6023 * @cmd:
6025 static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
6027 struct igb_adapter *adapter = netdev_priv(netdev);
6028 struct mii_ioctl_data *data = if_mii(ifr);
6030 if (adapter->hw.phy.media_type != e1000_media_type_copper)
6031 return -EOPNOTSUPP;
6033 switch (cmd) {
6034 case SIOCGMIIPHY:
6035 data->phy_id = adapter->hw.phy.addr;
6036 break;
6037 case SIOCGMIIREG:
6038 if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
6039 &data->val_out))
6040 return -EIO;
6041 break;
6042 case SIOCSMIIREG:
6043 default:
6044 return -EOPNOTSUPP;
6046 return 0;
6050 * igb_hwtstamp_ioctl - control hardware time stamping
6051 * @netdev:
6052 * @ifreq:
6053 * @cmd:
6055 * Outgoing time stamping can be enabled and disabled. Play nice and
6056 * disable it when requested, although it shouldn't case any overhead
6057 * when no packet needs it. At most one packet in the queue may be
6058 * marked for time stamping, otherwise it would be impossible to tell
6059 * for sure to which packet the hardware time stamp belongs.
6061 * Incoming time stamping has to be configured via the hardware
6062 * filters. Not all combinations are supported, in particular event
6063 * type has to be specified. Matching the kind of event packet is
6064 * not supported, with the exception of "all V2 events regardless of
6065 * level 2 or 4".
6068 static int igb_hwtstamp_ioctl(struct net_device *netdev,
6069 struct ifreq *ifr, int cmd)
6071 struct igb_adapter *adapter = netdev_priv(netdev);
6072 struct e1000_hw *hw = &adapter->hw;
6073 struct hwtstamp_config config;
6074 u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
6075 u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
6076 u32 tsync_rx_cfg = 0;
6077 bool is_l4 = false;
6078 bool is_l2 = false;
6079 u32 regval;
6081 if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
6082 return -EFAULT;
6084 /* reserved for future extensions */
6085 if (config.flags)
6086 return -EINVAL;
6088 switch (config.tx_type) {
6089 case HWTSTAMP_TX_OFF:
6090 tsync_tx_ctl = 0;
6091 case HWTSTAMP_TX_ON:
6092 break;
6093 default:
6094 return -ERANGE;
6097 switch (config.rx_filter) {
6098 case HWTSTAMP_FILTER_NONE:
6099 tsync_rx_ctl = 0;
6100 break;
6101 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
6102 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
6103 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
6104 case HWTSTAMP_FILTER_ALL:
6106 * register TSYNCRXCFG must be set, therefore it is not
6107 * possible to time stamp both Sync and Delay_Req messages
6108 * => fall back to time stamping all packets
6110 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
6111 config.rx_filter = HWTSTAMP_FILTER_ALL;
6112 break;
6113 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
6114 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
6115 tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
6116 is_l4 = true;
6117 break;
6118 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
6119 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
6120 tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
6121 is_l4 = true;
6122 break;
6123 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
6124 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
6125 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
6126 tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE;
6127 is_l2 = true;
6128 is_l4 = true;
6129 config.rx_filter = HWTSTAMP_FILTER_SOME;
6130 break;
6131 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
6132 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
6133 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
6134 tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE;
6135 is_l2 = true;
6136 is_l4 = true;
6137 config.rx_filter = HWTSTAMP_FILTER_SOME;
6138 break;
6139 case HWTSTAMP_FILTER_PTP_V2_EVENT:
6140 case HWTSTAMP_FILTER_PTP_V2_SYNC:
6141 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
6142 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
6143 config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
6144 is_l2 = true;
6145 break;
6146 default:
6147 return -ERANGE;
6150 if (hw->mac.type == e1000_82575) {
6151 if (tsync_rx_ctl | tsync_tx_ctl)
6152 return -EINVAL;
6153 return 0;
6157 * Per-packet timestamping only works if all packets are
6158 * timestamped, so enable timestamping in all packets as
6159 * long as one rx filter was configured.
6161 if ((hw->mac.type == e1000_82580) && tsync_rx_ctl) {
6162 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
6163 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
6166 /* enable/disable TX */
6167 regval = rd32(E1000_TSYNCTXCTL);
6168 regval &= ~E1000_TSYNCTXCTL_ENABLED;
6169 regval |= tsync_tx_ctl;
6170 wr32(E1000_TSYNCTXCTL, regval);
6172 /* enable/disable RX */
6173 regval = rd32(E1000_TSYNCRXCTL);
6174 regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
6175 regval |= tsync_rx_ctl;
6176 wr32(E1000_TSYNCRXCTL, regval);
6178 /* define which PTP packets are time stamped */
6179 wr32(E1000_TSYNCRXCFG, tsync_rx_cfg);
6181 /* define ethertype filter for timestamped packets */
6182 if (is_l2)
6183 wr32(E1000_ETQF(3),
6184 (E1000_ETQF_FILTER_ENABLE | /* enable filter */
6185 E1000_ETQF_1588 | /* enable timestamping */
6186 ETH_P_1588)); /* 1588 eth protocol type */
6187 else
6188 wr32(E1000_ETQF(3), 0);
6190 #define PTP_PORT 319
6191 /* L4 Queue Filter[3]: filter by destination port and protocol */
6192 if (is_l4) {
6193 u32 ftqf = (IPPROTO_UDP /* UDP */
6194 | E1000_FTQF_VF_BP /* VF not compared */
6195 | E1000_FTQF_1588_TIME_STAMP /* Enable Timestamping */
6196 | E1000_FTQF_MASK); /* mask all inputs */
6197 ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
6199 wr32(E1000_IMIR(3), htons(PTP_PORT));
6200 wr32(E1000_IMIREXT(3),
6201 (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
6202 if (hw->mac.type == e1000_82576) {
6203 /* enable source port check */
6204 wr32(E1000_SPQF(3), htons(PTP_PORT));
6205 ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
6207 wr32(E1000_FTQF(3), ftqf);
6208 } else {
6209 wr32(E1000_FTQF(3), E1000_FTQF_MASK);
6211 wrfl();
6213 adapter->hwtstamp_config = config;
6215 /* clear TX/RX time stamp registers, just to be sure */
6216 regval = rd32(E1000_TXSTMPH);
6217 regval = rd32(E1000_RXSTMPH);
6219 return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
6220 -EFAULT : 0;
6224 * igb_ioctl -
6225 * @netdev:
6226 * @ifreq:
6227 * @cmd:
6229 static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
6231 switch (cmd) {
6232 case SIOCGMIIPHY:
6233 case SIOCGMIIREG:
6234 case SIOCSMIIREG:
6235 return igb_mii_ioctl(netdev, ifr, cmd);
6236 case SIOCSHWTSTAMP:
6237 return igb_hwtstamp_ioctl(netdev, ifr, cmd);
6238 default:
6239 return -EOPNOTSUPP;
6243 s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
6245 struct igb_adapter *adapter = hw->back;
6246 u16 cap_offset;
6248 cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
6249 if (!cap_offset)
6250 return -E1000_ERR_CONFIG;
6252 pci_read_config_word(adapter->pdev, cap_offset + reg, value);
6254 return 0;
6257 s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
6259 struct igb_adapter *adapter = hw->back;
6260 u16 cap_offset;
6262 cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
6263 if (!cap_offset)
6264 return -E1000_ERR_CONFIG;
6266 pci_write_config_word(adapter->pdev, cap_offset + reg, *value);
6268 return 0;
6271 static void igb_vlan_rx_register(struct net_device *netdev,
6272 struct vlan_group *grp)
6274 struct igb_adapter *adapter = netdev_priv(netdev);
6275 struct e1000_hw *hw = &adapter->hw;
6276 u32 ctrl, rctl;
6278 igb_irq_disable(adapter);
6279 adapter->vlgrp = grp;
6281 if (grp) {
6282 /* enable VLAN tag insert/strip */
6283 ctrl = rd32(E1000_CTRL);
6284 ctrl |= E1000_CTRL_VME;
6285 wr32(E1000_CTRL, ctrl);
6287 /* Disable CFI check */
6288 rctl = rd32(E1000_RCTL);
6289 rctl &= ~E1000_RCTL_CFIEN;
6290 wr32(E1000_RCTL, rctl);
6291 } else {
6292 /* disable VLAN tag insert/strip */
6293 ctrl = rd32(E1000_CTRL);
6294 ctrl &= ~E1000_CTRL_VME;
6295 wr32(E1000_CTRL, ctrl);
6298 igb_rlpml_set(adapter);
6300 if (!test_bit(__IGB_DOWN, &adapter->state))
6301 igb_irq_enable(adapter);
6304 static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
6306 struct igb_adapter *adapter = netdev_priv(netdev);
6307 struct e1000_hw *hw = &adapter->hw;
6308 int pf_id = adapter->vfs_allocated_count;
6310 /* attempt to add filter to vlvf array */
6311 igb_vlvf_set(adapter, vid, true, pf_id);
6313 /* add the filter since PF can receive vlans w/o entry in vlvf */
6314 igb_vfta_set(hw, vid, true);
6317 static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
6319 struct igb_adapter *adapter = netdev_priv(netdev);
6320 struct e1000_hw *hw = &adapter->hw;
6321 int pf_id = adapter->vfs_allocated_count;
6322 s32 err;
6324 igb_irq_disable(adapter);
6325 vlan_group_set_device(adapter->vlgrp, vid, NULL);
6327 if (!test_bit(__IGB_DOWN, &adapter->state))
6328 igb_irq_enable(adapter);
6330 /* remove vlan from VLVF table array */
6331 err = igb_vlvf_set(adapter, vid, false, pf_id);
6333 /* if vid was not present in VLVF just remove it from table */
6334 if (err)
6335 igb_vfta_set(hw, vid, false);
6338 static void igb_restore_vlan(struct igb_adapter *adapter)
6340 igb_vlan_rx_register(adapter->netdev, adapter->vlgrp);
6342 if (adapter->vlgrp) {
6343 u16 vid;
6344 for (vid = 0; vid < VLAN_N_VID; vid++) {
6345 if (!vlan_group_get_device(adapter->vlgrp, vid))
6346 continue;
6347 igb_vlan_rx_add_vid(adapter->netdev, vid);
6352 int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
6354 struct pci_dev *pdev = adapter->pdev;
6355 struct e1000_mac_info *mac = &adapter->hw.mac;
6357 mac->autoneg = 0;
6359 /* Make sure dplx is at most 1 bit and lsb of speed is not set
6360 * for the switch() below to work */
6361 if ((spd & 1) || (dplx & ~1))
6362 goto err_inval;
6364 /* Fiber NIC's only allow 1000 Gbps Full duplex */
6365 if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) &&
6366 spd != SPEED_1000 &&
6367 dplx != DUPLEX_FULL)
6368 goto err_inval;
6370 switch (spd + dplx) {
6371 case SPEED_10 + DUPLEX_HALF:
6372 mac->forced_speed_duplex = ADVERTISE_10_HALF;
6373 break;
6374 case SPEED_10 + DUPLEX_FULL:
6375 mac->forced_speed_duplex = ADVERTISE_10_FULL;
6376 break;
6377 case SPEED_100 + DUPLEX_HALF:
6378 mac->forced_speed_duplex = ADVERTISE_100_HALF;
6379 break;
6380 case SPEED_100 + DUPLEX_FULL:
6381 mac->forced_speed_duplex = ADVERTISE_100_FULL;
6382 break;
6383 case SPEED_1000 + DUPLEX_FULL:
6384 mac->autoneg = 1;
6385 adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
6386 break;
6387 case SPEED_1000 + DUPLEX_HALF: /* not supported */
6388 default:
6389 goto err_inval;
6391 return 0;
6393 err_inval:
6394 dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
6395 return -EINVAL;
6398 static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
6400 struct net_device *netdev = pci_get_drvdata(pdev);
6401 struct igb_adapter *adapter = netdev_priv(netdev);
6402 struct e1000_hw *hw = &adapter->hw;
6403 u32 ctrl, rctl, status;
6404 u32 wufc = adapter->wol;
6405 #ifdef CONFIG_PM
6406 int retval = 0;
6407 #endif
6409 netif_device_detach(netdev);
6411 if (netif_running(netdev))
6412 igb_close(netdev);
6414 igb_clear_interrupt_scheme(adapter);
6416 #ifdef CONFIG_PM
6417 retval = pci_save_state(pdev);
6418 if (retval)
6419 return retval;
6420 #endif
6422 status = rd32(E1000_STATUS);
6423 if (status & E1000_STATUS_LU)
6424 wufc &= ~E1000_WUFC_LNKC;
6426 if (wufc) {
6427 igb_setup_rctl(adapter);
6428 igb_set_rx_mode(netdev);
6430 /* turn on all-multi mode if wake on multicast is enabled */
6431 if (wufc & E1000_WUFC_MC) {
6432 rctl = rd32(E1000_RCTL);
6433 rctl |= E1000_RCTL_MPE;
6434 wr32(E1000_RCTL, rctl);
6437 ctrl = rd32(E1000_CTRL);
6438 /* advertise wake from D3Cold */
6439 #define E1000_CTRL_ADVD3WUC 0x00100000
6440 /* phy power management enable */
6441 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
6442 ctrl |= E1000_CTRL_ADVD3WUC;
6443 wr32(E1000_CTRL, ctrl);
6445 /* Allow time for pending master requests to run */
6446 igb_disable_pcie_master(hw);
6448 wr32(E1000_WUC, E1000_WUC_PME_EN);
6449 wr32(E1000_WUFC, wufc);
6450 } else {
6451 wr32(E1000_WUC, 0);
6452 wr32(E1000_WUFC, 0);
6455 *enable_wake = wufc || adapter->en_mng_pt;
6456 if (!*enable_wake)
6457 igb_power_down_link(adapter);
6458 else
6459 igb_power_up_link(adapter);
6461 /* Release control of h/w to f/w. If f/w is AMT enabled, this
6462 * would have already happened in close and is redundant. */
6463 igb_release_hw_control(adapter);
6465 pci_disable_device(pdev);
6467 return 0;
6470 #ifdef CONFIG_PM
6471 static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
6473 int retval;
6474 bool wake;
6476 retval = __igb_shutdown(pdev, &wake);
6477 if (retval)
6478 return retval;
6480 if (wake) {
6481 pci_prepare_to_sleep(pdev);
6482 } else {
6483 pci_wake_from_d3(pdev, false);
6484 pci_set_power_state(pdev, PCI_D3hot);
6487 return 0;
6490 static int igb_resume(struct pci_dev *pdev)
6492 struct net_device *netdev = pci_get_drvdata(pdev);
6493 struct igb_adapter *adapter = netdev_priv(netdev);
6494 struct e1000_hw *hw = &adapter->hw;
6495 u32 err;
6497 pci_set_power_state(pdev, PCI_D0);
6498 pci_restore_state(pdev);
6499 pci_save_state(pdev);
6501 err = pci_enable_device_mem(pdev);
6502 if (err) {
6503 dev_err(&pdev->dev,
6504 "igb: Cannot enable PCI device from suspend\n");
6505 return err;
6507 pci_set_master(pdev);
6509 pci_enable_wake(pdev, PCI_D3hot, 0);
6510 pci_enable_wake(pdev, PCI_D3cold, 0);
6512 if (igb_init_interrupt_scheme(adapter)) {
6513 dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
6514 return -ENOMEM;
6517 igb_reset(adapter);
6519 /* let the f/w know that the h/w is now under the control of the
6520 * driver. */
6521 igb_get_hw_control(adapter);
6523 wr32(E1000_WUS, ~0);
6525 if (netif_running(netdev)) {
6526 err = igb_open(netdev);
6527 if (err)
6528 return err;
6531 netif_device_attach(netdev);
6533 return 0;
6535 #endif
6537 static void igb_shutdown(struct pci_dev *pdev)
6539 bool wake;
6541 __igb_shutdown(pdev, &wake);
6543 if (system_state == SYSTEM_POWER_OFF) {
6544 pci_wake_from_d3(pdev, wake);
6545 pci_set_power_state(pdev, PCI_D3hot);
6549 #ifdef CONFIG_NET_POLL_CONTROLLER
6551 * Polling 'interrupt' - used by things like netconsole to send skbs
6552 * without having to re-enable interrupts. It's not called while
6553 * the interrupt routine is executing.
6555 static void igb_netpoll(struct net_device *netdev)
6557 struct igb_adapter *adapter = netdev_priv(netdev);
6558 struct e1000_hw *hw = &adapter->hw;
6559 int i;
6561 if (!adapter->msix_entries) {
6562 struct igb_q_vector *q_vector = adapter->q_vector[0];
6563 igb_irq_disable(adapter);
6564 napi_schedule(&q_vector->napi);
6565 return;
6568 for (i = 0; i < adapter->num_q_vectors; i++) {
6569 struct igb_q_vector *q_vector = adapter->q_vector[i];
6570 wr32(E1000_EIMC, q_vector->eims_value);
6571 napi_schedule(&q_vector->napi);
6574 #endif /* CONFIG_NET_POLL_CONTROLLER */
6577 * igb_io_error_detected - called when PCI error is detected
6578 * @pdev: Pointer to PCI device
6579 * @state: The current pci connection state
6581 * This function is called after a PCI bus error affecting
6582 * this device has been detected.
6584 static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
6585 pci_channel_state_t state)
6587 struct net_device *netdev = pci_get_drvdata(pdev);
6588 struct igb_adapter *adapter = netdev_priv(netdev);
6590 netif_device_detach(netdev);
6592 if (state == pci_channel_io_perm_failure)
6593 return PCI_ERS_RESULT_DISCONNECT;
6595 if (netif_running(netdev))
6596 igb_down(adapter);
6597 pci_disable_device(pdev);
6599 /* Request a slot slot reset. */
6600 return PCI_ERS_RESULT_NEED_RESET;
6604 * igb_io_slot_reset - called after the pci bus has been reset.
6605 * @pdev: Pointer to PCI device
6607 * Restart the card from scratch, as if from a cold-boot. Implementation
6608 * resembles the first-half of the igb_resume routine.
6610 static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
6612 struct net_device *netdev = pci_get_drvdata(pdev);
6613 struct igb_adapter *adapter = netdev_priv(netdev);
6614 struct e1000_hw *hw = &adapter->hw;
6615 pci_ers_result_t result;
6616 int err;
6618 if (pci_enable_device_mem(pdev)) {
6619 dev_err(&pdev->dev,
6620 "Cannot re-enable PCI device after reset.\n");
6621 result = PCI_ERS_RESULT_DISCONNECT;
6622 } else {
6623 pci_set_master(pdev);
6624 pci_restore_state(pdev);
6625 pci_save_state(pdev);
6627 pci_enable_wake(pdev, PCI_D3hot, 0);
6628 pci_enable_wake(pdev, PCI_D3cold, 0);
6630 igb_reset(adapter);
6631 wr32(E1000_WUS, ~0);
6632 result = PCI_ERS_RESULT_RECOVERED;
6635 err = pci_cleanup_aer_uncorrect_error_status(pdev);
6636 if (err) {
6637 dev_err(&pdev->dev, "pci_cleanup_aer_uncorrect_error_status "
6638 "failed 0x%0x\n", err);
6639 /* non-fatal, continue */
6642 return result;
6646 * igb_io_resume - called when traffic can start flowing again.
6647 * @pdev: Pointer to PCI device
6649 * This callback is called when the error recovery driver tells us that
6650 * its OK to resume normal operation. Implementation resembles the
6651 * second-half of the igb_resume routine.
6653 static void igb_io_resume(struct pci_dev *pdev)
6655 struct net_device *netdev = pci_get_drvdata(pdev);
6656 struct igb_adapter *adapter = netdev_priv(netdev);
6658 if (netif_running(netdev)) {
6659 if (igb_up(adapter)) {
6660 dev_err(&pdev->dev, "igb_up failed after reset\n");
6661 return;
6665 netif_device_attach(netdev);
6667 /* let the f/w know that the h/w is now under the control of the
6668 * driver. */
6669 igb_get_hw_control(adapter);
6672 static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
6673 u8 qsel)
6675 u32 rar_low, rar_high;
6676 struct e1000_hw *hw = &adapter->hw;
6678 /* HW expects these in little endian so we reverse the byte order
6679 * from network order (big endian) to little endian
6681 rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
6682 ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
6683 rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
6685 /* Indicate to hardware the Address is Valid. */
6686 rar_high |= E1000_RAH_AV;
6688 if (hw->mac.type == e1000_82575)
6689 rar_high |= E1000_RAH_POOL_1 * qsel;
6690 else
6691 rar_high |= E1000_RAH_POOL_1 << qsel;
6693 wr32(E1000_RAL(index), rar_low);
6694 wrfl();
6695 wr32(E1000_RAH(index), rar_high);
6696 wrfl();
6699 static int igb_set_vf_mac(struct igb_adapter *adapter,
6700 int vf, unsigned char *mac_addr)
6702 struct e1000_hw *hw = &adapter->hw;
6703 /* VF MAC addresses start at end of receive addresses and moves
6704 * torwards the first, as a result a collision should not be possible */
6705 int rar_entry = hw->mac.rar_entry_count - (vf + 1);
6707 memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
6709 igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
6711 return 0;
6714 static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
6716 struct igb_adapter *adapter = netdev_priv(netdev);
6717 if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
6718 return -EINVAL;
6719 adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
6720 dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
6721 dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
6722 " change effective.");
6723 if (test_bit(__IGB_DOWN, &adapter->state)) {
6724 dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
6725 " but the PF device is not up.\n");
6726 dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
6727 " attempting to use the VF device.\n");
6729 return igb_set_vf_mac(adapter, vf, mac);
6732 static int igb_link_mbps(int internal_link_speed)
6734 switch (internal_link_speed) {
6735 case SPEED_100:
6736 return 100;
6737 case SPEED_1000:
6738 return 1000;
6739 default:
6740 return 0;
6744 static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
6745 int link_speed)
6747 int rf_dec, rf_int;
6748 u32 bcnrc_val;
6750 if (tx_rate != 0) {
6751 /* Calculate the rate factor values to set */
6752 rf_int = link_speed / tx_rate;
6753 rf_dec = (link_speed - (rf_int * tx_rate));
6754 rf_dec = (rf_dec * (1<<E1000_RTTBCNRC_RF_INT_SHIFT)) / tx_rate;
6756 bcnrc_val = E1000_RTTBCNRC_RS_ENA;
6757 bcnrc_val |= ((rf_int<<E1000_RTTBCNRC_RF_INT_SHIFT) &
6758 E1000_RTTBCNRC_RF_INT_MASK);
6759 bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
6760 } else {
6761 bcnrc_val = 0;
6764 wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */
6765 wr32(E1000_RTTBCNRC, bcnrc_val);
6768 static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
6770 int actual_link_speed, i;
6771 bool reset_rate = false;
6773 /* VF TX rate limit was not set or not supported */
6774 if ((adapter->vf_rate_link_speed == 0) ||
6775 (adapter->hw.mac.type != e1000_82576))
6776 return;
6778 actual_link_speed = igb_link_mbps(adapter->link_speed);
6779 if (actual_link_speed != adapter->vf_rate_link_speed) {
6780 reset_rate = true;
6781 adapter->vf_rate_link_speed = 0;
6782 dev_info(&adapter->pdev->dev,
6783 "Link speed has been changed. VF Transmit "
6784 "rate is disabled\n");
6787 for (i = 0; i < adapter->vfs_allocated_count; i++) {
6788 if (reset_rate)
6789 adapter->vf_data[i].tx_rate = 0;
6791 igb_set_vf_rate_limit(&adapter->hw, i,
6792 adapter->vf_data[i].tx_rate,
6793 actual_link_speed);
6797 static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
6799 struct igb_adapter *adapter = netdev_priv(netdev);
6800 struct e1000_hw *hw = &adapter->hw;
6801 int actual_link_speed;
6803 if (hw->mac.type != e1000_82576)
6804 return -EOPNOTSUPP;
6806 actual_link_speed = igb_link_mbps(adapter->link_speed);
6807 if ((vf >= adapter->vfs_allocated_count) ||
6808 (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
6809 (tx_rate < 0) || (tx_rate > actual_link_speed))
6810 return -EINVAL;
6812 adapter->vf_rate_link_speed = actual_link_speed;
6813 adapter->vf_data[vf].tx_rate = (u16)tx_rate;
6814 igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed);
6816 return 0;
6819 static int igb_ndo_get_vf_config(struct net_device *netdev,
6820 int vf, struct ifla_vf_info *ivi)
6822 struct igb_adapter *adapter = netdev_priv(netdev);
6823 if (vf >= adapter->vfs_allocated_count)
6824 return -EINVAL;
6825 ivi->vf = vf;
6826 memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
6827 ivi->tx_rate = adapter->vf_data[vf].tx_rate;
6828 ivi->vlan = adapter->vf_data[vf].pf_vlan;
6829 ivi->qos = adapter->vf_data[vf].pf_qos;
6830 return 0;
6833 static void igb_vmm_control(struct igb_adapter *adapter)
6835 struct e1000_hw *hw = &adapter->hw;
6836 u32 reg;
6838 switch (hw->mac.type) {
6839 case e1000_82575:
6840 default:
6841 /* replication is not supported for 82575 */
6842 return;
6843 case e1000_82576:
6844 /* notify HW that the MAC is adding vlan tags */
6845 reg = rd32(E1000_DTXCTL);
6846 reg |= E1000_DTXCTL_VLAN_ADDED;
6847 wr32(E1000_DTXCTL, reg);
6848 case e1000_82580:
6849 /* enable replication vlan tag stripping */
6850 reg = rd32(E1000_RPLOLR);
6851 reg |= E1000_RPLOLR_STRVLAN;
6852 wr32(E1000_RPLOLR, reg);
6853 case e1000_i350:
6854 /* none of the above registers are supported by i350 */
6855 break;
6858 if (adapter->vfs_allocated_count) {
6859 igb_vmdq_set_loopback_pf(hw, true);
6860 igb_vmdq_set_replication_pf(hw, true);
6861 igb_vmdq_set_anti_spoofing_pf(hw, true,
6862 adapter->vfs_allocated_count);
6863 } else {
6864 igb_vmdq_set_loopback_pf(hw, false);
6865 igb_vmdq_set_replication_pf(hw, false);
6869 /* igb_main.c */