2 * ks8842_main.c timberdale KS8842 ethernet driver
3 * Copyright (c) 2009 Intel Corporation
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 * The Micrel KS8842 behind the timberdale FPGA
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/platform_device.h>
26 #include <linux/netdevice.h>
27 #include <linux/etherdevice.h>
28 #include <linux/ethtool.h>
30 #define DRV_NAME "ks8842"
32 /* Timberdale specific Registers */
33 #define REG_TIMB_RST 0x1c
35 /* KS8842 registers */
37 #define REG_SELECT_BANK 0x0e
39 /* bank 0 registers */
40 #define REG_QRFCR 0x04
42 /* bank 2 registers */
47 /* bank 3 registers */
50 /* bank 16 registers */
54 #define REG_TXMIR 0x08
55 #define REG_RXMIR 0x0A
57 /* bank 17 registers */
58 #define REG_TXQCR 0x00
59 #define REG_RXQCR 0x02
60 #define REG_TXFDPR 0x04
61 #define REG_RXFDPR 0x06
62 #define REG_QMU_DATA_LO 0x08
63 #define REG_QMU_DATA_HI 0x0A
65 /* bank 18 registers */
67 #define IRQ_LINK_CHANGE 0x8000
70 #define IRQ_RX_OVERRUN 0x0800
71 #define IRQ_TX_STOPPED 0x0200
72 #define IRQ_RX_STOPPED 0x0100
73 #define IRQ_RX_ERROR 0x0080
74 #define ENABLED_IRQS (IRQ_LINK_CHANGE | IRQ_TX | IRQ_RX | IRQ_RX_STOPPED | \
75 IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
78 #define RXSR_VALID 0x8000
79 #define RXSR_BROADCAST 0x80
80 #define RXSR_MULTICAST 0x40
81 #define RXSR_UNICAST 0x20
82 #define RXSR_FRAMETYPE 0x08
83 #define RXSR_TOO_LONG 0x04
84 #define RXSR_RUNT 0x02
85 #define RXSR_CRC_ERROR 0x01
86 #define RXSR_ERROR (RXSR_TOO_LONG | RXSR_RUNT | RXSR_CRC_ERROR)
88 /* bank 32 registers */
89 #define REG_SW_ID_AND_ENABLE 0x00
90 #define REG_SGCR1 0x02
91 #define REG_SGCR2 0x04
92 #define REG_SGCR3 0x06
94 /* bank 39 registers */
95 #define REG_MACAR1 0x00
96 #define REG_MACAR2 0x02
97 #define REG_MACAR3 0x04
99 /* bank 45 registers */
100 #define REG_P1MBCR 0x00
101 #define REG_P1MBSR 0x02
103 /* bank 46 registers */
104 #define REG_P2MBCR 0x00
105 #define REG_P2MBSR 0x02
107 /* bank 48 registers */
108 #define REG_P1CR2 0x02
110 /* bank 49 registers */
111 #define REG_P1CR4 0x02
112 #define REG_P1SR 0x04
114 struct ks8842_adapter
{
115 void __iomem
*hw_addr
;
117 struct tasklet_struct tasklet
;
118 spinlock_t lock
; /* spinlock to be interrupt safe */
119 struct platform_device
*pdev
;
122 static inline void ks8842_select_bank(struct ks8842_adapter
*adapter
, u16 bank
)
124 iowrite16(bank
, adapter
->hw_addr
+ REG_SELECT_BANK
);
127 static inline void ks8842_write8(struct ks8842_adapter
*adapter
, u16 bank
,
128 u8 value
, int offset
)
130 ks8842_select_bank(adapter
, bank
);
131 iowrite8(value
, adapter
->hw_addr
+ offset
);
134 static inline void ks8842_write16(struct ks8842_adapter
*adapter
, u16 bank
,
135 u16 value
, int offset
)
137 ks8842_select_bank(adapter
, bank
);
138 iowrite16(value
, adapter
->hw_addr
+ offset
);
141 static inline void ks8842_enable_bits(struct ks8842_adapter
*adapter
, u16 bank
,
142 u16 bits
, int offset
)
145 ks8842_select_bank(adapter
, bank
);
146 reg
= ioread16(adapter
->hw_addr
+ offset
);
148 iowrite16(reg
, adapter
->hw_addr
+ offset
);
151 static inline void ks8842_clear_bits(struct ks8842_adapter
*adapter
, u16 bank
,
152 u16 bits
, int offset
)
155 ks8842_select_bank(adapter
, bank
);
156 reg
= ioread16(adapter
->hw_addr
+ offset
);
158 iowrite16(reg
, adapter
->hw_addr
+ offset
);
161 static inline void ks8842_write32(struct ks8842_adapter
*adapter
, u16 bank
,
162 u32 value
, int offset
)
164 ks8842_select_bank(adapter
, bank
);
165 iowrite32(value
, adapter
->hw_addr
+ offset
);
168 static inline u8
ks8842_read8(struct ks8842_adapter
*adapter
, u16 bank
,
171 ks8842_select_bank(adapter
, bank
);
172 return ioread8(adapter
->hw_addr
+ offset
);
175 static inline u16
ks8842_read16(struct ks8842_adapter
*adapter
, u16 bank
,
178 ks8842_select_bank(adapter
, bank
);
179 return ioread16(adapter
->hw_addr
+ offset
);
182 static inline u32
ks8842_read32(struct ks8842_adapter
*adapter
, u16 bank
,
185 ks8842_select_bank(adapter
, bank
);
186 return ioread32(adapter
->hw_addr
+ offset
);
189 static void ks8842_reset(struct ks8842_adapter
*adapter
)
191 /* The KS8842 goes haywire when doing softare reset
192 * a work around in the timberdale IP is implemented to
193 * do a hardware reset instead
194 ks8842_write16(adapter, 3, 1, REG_GRR);
196 iowrite16(0, adapter->hw_addr + REG_GRR);
198 iowrite16(32, adapter
->hw_addr
+ REG_SELECT_BANK
);
199 iowrite32(0x1, adapter
->hw_addr
+ REG_TIMB_RST
);
203 static void ks8842_update_link_status(struct net_device
*netdev
,
204 struct ks8842_adapter
*adapter
)
206 /* check the status of the link */
207 if (ks8842_read16(adapter
, 45, REG_P1MBSR
) & 0x4) {
208 netif_carrier_on(netdev
);
209 netif_wake_queue(netdev
);
211 netif_stop_queue(netdev
);
212 netif_carrier_off(netdev
);
216 static void ks8842_enable_tx(struct ks8842_adapter
*adapter
)
218 ks8842_enable_bits(adapter
, 16, 0x01, REG_TXCR
);
221 static void ks8842_disable_tx(struct ks8842_adapter
*adapter
)
223 ks8842_clear_bits(adapter
, 16, 0x01, REG_TXCR
);
226 static void ks8842_enable_rx(struct ks8842_adapter
*adapter
)
228 ks8842_enable_bits(adapter
, 16, 0x01, REG_RXCR
);
231 static void ks8842_disable_rx(struct ks8842_adapter
*adapter
)
233 ks8842_clear_bits(adapter
, 16, 0x01, REG_RXCR
);
236 static void ks8842_reset_hw(struct ks8842_adapter
*adapter
)
239 ks8842_reset(adapter
);
241 /* Enable QMU Transmit flow control / transmit padding / Transmit CRC */
242 ks8842_write16(adapter
, 16, 0x000E, REG_TXCR
);
244 /* enable the receiver, uni + multi + broadcast + flow ctrl
246 ks8842_write16(adapter
, 16, 0x8 | 0x20 | 0x40 | 0x80 | 0x400,
249 /* TX frame pointer autoincrement */
250 ks8842_write16(adapter
, 17, 0x4000, REG_TXFDPR
);
252 /* RX frame pointer autoincrement */
253 ks8842_write16(adapter
, 17, 0x4000, REG_RXFDPR
);
255 /* RX 2 kb high watermark */
256 ks8842_write16(adapter
, 0, 0x1000, REG_QRFCR
);
258 /* aggresive back off in half duplex */
259 ks8842_enable_bits(adapter
, 32, 1 << 8, REG_SGCR1
);
261 /* enable no excessive collison drop */
262 ks8842_enable_bits(adapter
, 32, 1 << 3, REG_SGCR2
);
264 /* Enable port 1 force flow control / back pressure / transmit / recv */
265 ks8842_write16(adapter
, 48, 0x1E07, REG_P1CR2
);
267 /* restart port auto-negotiation */
268 ks8842_enable_bits(adapter
, 49, 1 << 13, REG_P1CR4
);
269 /* only advertise 10Mbps */
270 ks8842_clear_bits(adapter
, 49, 3 << 2, REG_P1CR4
);
272 /* Enable the transmitter */
273 ks8842_enable_tx(adapter
);
275 /* Enable the receiver */
276 ks8842_enable_rx(adapter
);
278 /* clear all interrupts */
279 ks8842_write16(adapter
, 18, 0xffff, REG_ISR
);
281 /* enable interrupts */
282 ks8842_write16(adapter
, 18, ENABLED_IRQS
, REG_IER
);
284 /* enable the switch */
285 ks8842_write16(adapter
, 32, 0x1, REG_SW_ID_AND_ENABLE
);
288 static void ks8842_read_mac_addr(struct ks8842_adapter
*adapter
, u8
*dest
)
293 for (i
= 0; i
< ETH_ALEN
; i
++)
294 dest
[ETH_ALEN
- i
- 1] = ks8842_read8(adapter
, 2, REG_MARL
+ i
);
296 /* make sure the switch port uses the same MAC as the QMU */
297 mac
= ks8842_read16(adapter
, 2, REG_MARL
);
298 ks8842_write16(adapter
, 39, mac
, REG_MACAR1
);
299 mac
= ks8842_read16(adapter
, 2, REG_MARM
);
300 ks8842_write16(adapter
, 39, mac
, REG_MACAR2
);
301 mac
= ks8842_read16(adapter
, 2, REG_MARH
);
302 ks8842_write16(adapter
, 39, mac
, REG_MACAR3
);
305 static inline u16
ks8842_tx_fifo_space(struct ks8842_adapter
*adapter
)
307 return ks8842_read16(adapter
, 16, REG_TXMIR
) & 0x1fff;
310 static int ks8842_tx_frame(struct sk_buff
*skb
, struct net_device
*netdev
)
312 struct ks8842_adapter
*adapter
= netdev_priv(netdev
);
314 u32
*ptr
= (u32
*)skb
->data
;
317 dev_dbg(&adapter
->pdev
->dev
,
318 "%s: len %u head %p data %p tail %p end %p\n",
319 __func__
, skb
->len
, skb
->head
, skb
->data
,
320 skb_tail_pointer(skb
), skb_end_pointer(skb
));
322 /* check FIFO buffer space, we need space for CRC and command bits */
323 if (ks8842_tx_fifo_space(adapter
) < len
+ 8)
324 return NETDEV_TX_BUSY
;
326 /* the control word, enable IRQ, port 1 and the length */
327 ctrl
= 0x8000 | 0x100 | (len
<< 16);
328 ks8842_write32(adapter
, 17, ctrl
, REG_QMU_DATA_LO
);
330 netdev
->stats
.tx_bytes
+= len
;
334 iowrite32(*ptr
, adapter
->hw_addr
+ REG_QMU_DATA_LO
);
340 ks8842_write16(adapter
, 17, 1, REG_TXQCR
);
347 static void ks8842_rx_frame(struct net_device
*netdev
,
348 struct ks8842_adapter
*adapter
)
350 u32 status
= ks8842_read32(adapter
, 17, REG_QMU_DATA_LO
);
351 int len
= (status
>> 16) & 0x7ff;
355 dev_dbg(&adapter
->pdev
->dev
, "%s - rx_data: status: %x\n",
358 /* check the status */
359 if ((status
& RXSR_VALID
) && !(status
& RXSR_ERROR
)) {
360 struct sk_buff
*skb
= netdev_alloc_skb(netdev
, len
+ 2);
362 dev_dbg(&adapter
->pdev
->dev
, "%s, got package, len: %d\n",
367 netdev
->stats
.rx_packets
++;
368 netdev
->stats
.rx_bytes
+= len
;
369 if (status
& RXSR_MULTICAST
)
370 netdev
->stats
.multicast
++;
372 /* Align socket buffer in 4-byte boundary for
373 better performance. */
375 data
= (u32
*)skb_put(skb
, len
);
377 ks8842_select_bank(adapter
, 17);
379 *data
++ = ioread32(adapter
->hw_addr
+
384 skb
->protocol
= eth_type_trans(skb
, netdev
);
387 netdev
->stats
.rx_dropped
++;
389 dev_dbg(&adapter
->pdev
->dev
, "RX error, status: %x\n", status
);
390 netdev
->stats
.rx_errors
++;
391 if (status
& RXSR_TOO_LONG
)
392 netdev
->stats
.rx_length_errors
++;
393 if (status
& RXSR_CRC_ERROR
)
394 netdev
->stats
.rx_crc_errors
++;
395 if (status
& RXSR_RUNT
)
396 netdev
->stats
.rx_frame_errors
++;
399 /* set high watermark to 3K */
400 ks8842_clear_bits(adapter
, 0, 1 << 12, REG_QRFCR
);
402 /* release the frame */
403 ks8842_write16(adapter
, 17, 0x01, REG_RXQCR
);
405 /* set high watermark to 2K */
406 ks8842_enable_bits(adapter
, 0, 1 << 12, REG_QRFCR
);
409 void ks8842_handle_rx(struct net_device
*netdev
, struct ks8842_adapter
*adapter
)
411 u16 rx_data
= ks8842_read16(adapter
, 16, REG_RXMIR
) & 0x1fff;
412 dev_dbg(&adapter
->pdev
->dev
, "%s Entry - rx_data: %d\n",
415 ks8842_rx_frame(netdev
, adapter
);
416 rx_data
= ks8842_read16(adapter
, 16, REG_RXMIR
) & 0x1fff;
420 void ks8842_handle_tx(struct net_device
*netdev
, struct ks8842_adapter
*adapter
)
422 u16 sr
= ks8842_read16(adapter
, 16, REG_TXSR
);
423 dev_dbg(&adapter
->pdev
->dev
, "%s - entry, sr: %x\n", __func__
, sr
);
424 netdev
->stats
.tx_packets
++;
425 if (netif_queue_stopped(netdev
))
426 netif_wake_queue(netdev
);
429 void ks8842_handle_rx_overrun(struct net_device
*netdev
,
430 struct ks8842_adapter
*adapter
)
432 dev_dbg(&adapter
->pdev
->dev
, "%s: entry\n", __func__
);
433 netdev
->stats
.rx_errors
++;
434 netdev
->stats
.rx_fifo_errors
++;
437 void ks8842_tasklet(unsigned long arg
)
439 struct net_device
*netdev
= (struct net_device
*)arg
;
440 struct ks8842_adapter
*adapter
= netdev_priv(netdev
);
445 /* read current bank to be able to set it back */
446 spin_lock_irqsave(&adapter
->lock
, flags
);
447 entry_bank
= ioread16(adapter
->hw_addr
+ REG_SELECT_BANK
);
448 spin_unlock_irqrestore(&adapter
->lock
, flags
);
450 isr
= ks8842_read16(adapter
, 18, REG_ISR
);
451 dev_dbg(&adapter
->pdev
->dev
, "%s - ISR: 0x%x\n", __func__
, isr
);
454 ks8842_write16(adapter
, 18, isr
, REG_ISR
);
456 if (!netif_running(netdev
))
459 if (isr
& IRQ_LINK_CHANGE
)
460 ks8842_update_link_status(netdev
, adapter
);
462 if (isr
& (IRQ_RX
| IRQ_RX_ERROR
))
463 ks8842_handle_rx(netdev
, adapter
);
466 ks8842_handle_tx(netdev
, adapter
);
468 if (isr
& IRQ_RX_OVERRUN
)
469 ks8842_handle_rx_overrun(netdev
, adapter
);
471 if (isr
& IRQ_TX_STOPPED
) {
472 ks8842_disable_tx(adapter
);
473 ks8842_enable_tx(adapter
);
476 if (isr
& IRQ_RX_STOPPED
) {
477 ks8842_disable_rx(adapter
);
478 ks8842_enable_rx(adapter
);
481 /* re-enable interrupts, put back the bank selection register */
482 spin_lock_irqsave(&adapter
->lock
, flags
);
483 ks8842_write16(adapter
, 18, ENABLED_IRQS
, REG_IER
);
484 iowrite16(entry_bank
, adapter
->hw_addr
+ REG_SELECT_BANK
);
485 spin_unlock_irqrestore(&adapter
->lock
, flags
);
488 static irqreturn_t
ks8842_irq(int irq
, void *devid
)
490 struct ks8842_adapter
*adapter
= devid
;
492 u16 entry_bank
= ioread16(adapter
->hw_addr
+ REG_SELECT_BANK
);
493 irqreturn_t ret
= IRQ_NONE
;
495 isr
= ks8842_read16(adapter
, 18, REG_ISR
);
496 dev_dbg(&adapter
->pdev
->dev
, "%s - ISR: 0x%x\n", __func__
, isr
);
500 ks8842_write16(adapter
, 18, 0x00, REG_IER
);
502 /* schedule tasklet */
503 tasklet_schedule(&adapter
->tasklet
);
508 iowrite16(entry_bank
, adapter
->hw_addr
+ REG_SELECT_BANK
);
514 /* Netdevice operations */
516 static int ks8842_open(struct net_device
*netdev
)
518 struct ks8842_adapter
*adapter
= netdev_priv(netdev
);
521 dev_dbg(&adapter
->pdev
->dev
, "%s - entry\n", __func__
);
524 ks8842_reset_hw(adapter
);
526 ks8842_update_link_status(netdev
, adapter
);
528 err
= request_irq(adapter
->irq
, ks8842_irq
, IRQF_SHARED
, DRV_NAME
,
531 printk(KERN_ERR
"Failed to request IRQ: %d: %d\n",
539 static int ks8842_close(struct net_device
*netdev
)
541 struct ks8842_adapter
*adapter
= netdev_priv(netdev
);
543 dev_dbg(&adapter
->pdev
->dev
, "%s - entry\n", __func__
);
546 free_irq(adapter
->irq
, adapter
);
548 /* disable the switch */
549 ks8842_write16(adapter
, 32, 0x0, REG_SW_ID_AND_ENABLE
);
554 static int ks8842_xmit_frame(struct sk_buff
*skb
, struct net_device
*netdev
)
557 struct ks8842_adapter
*adapter
= netdev_priv(netdev
);
559 dev_dbg(&adapter
->pdev
->dev
, "%s: entry\n", __func__
);
561 ret
= ks8842_tx_frame(skb
, netdev
);
563 if (ks8842_tx_fifo_space(adapter
) < netdev
->mtu
+ 8)
564 netif_stop_queue(netdev
);
569 static int ks8842_set_mac(struct net_device
*netdev
, void *p
)
571 struct ks8842_adapter
*adapter
= netdev_priv(netdev
);
573 struct sockaddr
*addr
= p
;
574 char *mac
= (u8
*)addr
->sa_data
;
577 dev_dbg(&adapter
->pdev
->dev
, "%s: entry\n", __func__
);
579 if (!is_valid_ether_addr(addr
->sa_data
))
580 return -EADDRNOTAVAIL
;
582 memcpy(netdev
->dev_addr
, mac
, netdev
->addr_len
);
584 spin_lock_irqsave(&adapter
->lock
, flags
);
585 for (i
= 0; i
< ETH_ALEN
; i
++) {
586 ks8842_write8(adapter
, 2, mac
[ETH_ALEN
- i
- 1], REG_MARL
+ i
);
587 ks8842_write8(adapter
, 39, mac
[ETH_ALEN
- i
- 1],
590 spin_unlock_irqrestore(&adapter
->lock
, flags
);
594 static void ks8842_tx_timeout(struct net_device
*netdev
)
596 struct ks8842_adapter
*adapter
= netdev_priv(netdev
);
599 dev_dbg(&adapter
->pdev
->dev
, "%s: entry\n", __func__
);
601 spin_lock_irqsave(&adapter
->lock
, flags
);
602 /* disable interrupts */
603 ks8842_write16(adapter
, 18, 0, REG_IER
);
604 ks8842_write16(adapter
, 18, 0xFFFF, REG_ISR
);
605 spin_unlock_irqrestore(&adapter
->lock
, flags
);
607 ks8842_reset_hw(adapter
);
609 ks8842_update_link_status(netdev
, adapter
);
612 static const struct net_device_ops ks8842_netdev_ops
= {
613 .ndo_open
= ks8842_open
,
614 .ndo_stop
= ks8842_close
,
615 .ndo_start_xmit
= ks8842_xmit_frame
,
616 .ndo_set_mac_address
= ks8842_set_mac
,
617 .ndo_tx_timeout
= ks8842_tx_timeout
,
618 .ndo_validate_addr
= eth_validate_addr
621 static struct ethtool_ops ks8842_ethtool_ops
= {
622 .get_link
= ethtool_op_get_link
,
625 static int __devinit
ks8842_probe(struct platform_device
*pdev
)
628 struct resource
*iomem
;
629 struct net_device
*netdev
;
630 struct ks8842_adapter
*adapter
;
633 iomem
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
634 if (!request_mem_region(iomem
->start
, resource_size(iomem
), DRV_NAME
))
637 netdev
= alloc_etherdev(sizeof(struct ks8842_adapter
));
639 goto err_alloc_etherdev
;
641 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
643 adapter
= netdev_priv(netdev
);
644 adapter
->hw_addr
= ioremap(iomem
->start
, resource_size(iomem
));
645 if (!adapter
->hw_addr
)
648 adapter
->irq
= platform_get_irq(pdev
, 0);
649 if (adapter
->irq
< 0) {
654 adapter
->pdev
= pdev
;
656 tasklet_init(&adapter
->tasklet
, ks8842_tasklet
, (unsigned long)netdev
);
657 spin_lock_init(&adapter
->lock
);
659 netdev
->netdev_ops
= &ks8842_netdev_ops
;
660 netdev
->ethtool_ops
= &ks8842_ethtool_ops
;
662 ks8842_read_mac_addr(adapter
, netdev
->dev_addr
);
664 id
= ks8842_read16(adapter
, 32, REG_SW_ID_AND_ENABLE
);
666 strcpy(netdev
->name
, "eth%d");
667 err
= register_netdev(netdev
);
671 platform_set_drvdata(pdev
, netdev
);
673 printk(KERN_INFO DRV_NAME
674 " Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
675 (id
>> 8) & 0xff, (id
>> 4) & 0xf, (id
>> 1) & 0x7);
681 iounmap(adapter
->hw_addr
);
685 release_mem_region(iomem
->start
, resource_size(iomem
));
690 static int __devexit
ks8842_remove(struct platform_device
*pdev
)
692 struct net_device
*netdev
= platform_get_drvdata(pdev
);
693 struct ks8842_adapter
*adapter
= netdev_priv(netdev
);
694 struct resource
*iomem
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
696 unregister_netdev(netdev
);
697 tasklet_kill(&adapter
->tasklet
);
698 iounmap(adapter
->hw_addr
);
700 release_mem_region(iomem
->start
, resource_size(iomem
));
701 platform_set_drvdata(pdev
, NULL
);
706 static struct platform_driver ks8842_platform_driver
= {
709 .owner
= THIS_MODULE
,
711 .probe
= ks8842_probe
,
712 .remove
= ks8842_remove
,
715 static int __init
ks8842_init(void)
717 return platform_driver_register(&ks8842_platform_driver
);
720 static void __exit
ks8842_exit(void)
722 platform_driver_unregister(&ks8842_platform_driver
);
725 module_init(ks8842_init
);
726 module_exit(ks8842_exit
);
728 MODULE_DESCRIPTION("Timberdale KS8842 ethernet driver");
729 MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
730 MODULE_LICENSE("GPL v2");
731 MODULE_ALIAS("platform:ks8842");