?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ARM: 5687/1: fix an oops with highmem
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / e100.c
blob3a6735dc9f6a6158bf04196c22c144133de55408
1 /*******************************************************************************
2
3 Intel PRO/100 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
5
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
9
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 more details.
14
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
21
22 Contact Information:
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26
27 *******************************************************************************/
28
29 /*
30 * e100.c: Intel(R) PRO/100 ethernet driver
31 *
32 * (Re)written 2003 by scott.feldman@intel.com. Based loosely on
33 * original e100 driver, but better described as a munging of
34 * e100, e1000, eepro100, tg3, 8139cp, and other drivers.
35 *
36 * References:
37 * Intel 8255x 10/100 Mbps Ethernet Controller Family,
38 * Open Source Software Developers Manual,
39 * http://sourceforge.net/projects/e1000
40 *
41 *
42 * Theory of Operation
43 *
44 * I. General
45 *
46 * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
47 * controller family, which includes the 82557, 82558, 82559, 82550,
48 * 82551, and 82562 devices. 82558 and greater controllers
49 * integrate the Intel 82555 PHY. The controllers are used in
50 * server and client network interface cards, as well as in
51 * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
52 * configurations. 8255x supports a 32-bit linear addressing
53 * mode and operates at 33Mhz PCI clock rate.
54 *
55 * II. Driver Operation
56 *
57 * Memory-mapped mode is used exclusively to access the device's
58 * shared-memory structure, the Control/Status Registers (CSR). All
59 * setup, configuration, and control of the device, including queuing
60 * of Tx, Rx, and configuration commands is through the CSR.
61 * cmd_lock serializes accesses to the CSR command register. cb_lock
62 * protects the shared Command Block List (CBL).
63 *
64 * 8255x is highly MII-compliant and all access to the PHY go
65 * through the Management Data Interface (MDI). Consequently, the
66 * driver leverages the mii.c library shared with other MII-compliant
67 * devices.
68 *
69 * Big- and Little-Endian byte order as well as 32- and 64-bit
70 * archs are supported. Weak-ordered memory and non-cache-coherent
71 * archs are supported.
72 *
73 * III. Transmit
74 *
75 * A Tx skb is mapped and hangs off of a TCB. TCBs are linked
76 * together in a fixed-size ring (CBL) thus forming the flexible mode
77 * memory structure. A TCB marked with the suspend-bit indicates
78 * the end of the ring. The last TCB processed suspends the
79 * controller, and the controller can be restarted by issue a CU
80 * resume command to continue from the suspend point, or a CU start
81 * command to start at a given position in the ring.
82 *
83 * Non-Tx commands (config, multicast setup, etc) are linked
84 * into the CBL ring along with Tx commands. The common structure
85 * used for both Tx and non-Tx commands is the Command Block (CB).
86 *
87 * cb_to_use is the next CB to use for queuing a command; cb_to_clean
88 * is the next CB to check for completion; cb_to_send is the first
89 * CB to start on in case of a previous failure to resume. CB clean
90 * up happens in interrupt context in response to a CU interrupt.
91 * cbs_avail keeps track of number of free CB resources available.
92 *
93 * Hardware padding of short packets to minimum packet size is
94 * enabled. 82557 pads with 7Eh, while the later controllers pad
95 * with 00h.
96 *
97 * IV. Receive
98 *
99 * The Receive Frame Area (RFA) comprises a ring of Receive Frame
100 * Descriptors (RFD) + data buffer, thus forming the simplified mode
101 * memory structure. Rx skbs are allocated to contain both the RFD
102 * and the data buffer, but the RFD is pulled off before the skb is
103 * indicated. The data buffer is aligned such that encapsulated
104 * protocol headers are u32-aligned. Since the RFD is part of the
105 * mapped shared memory, and completion status is contained within
106 * the RFD, the RFD must be dma_sync'ed to maintain a consistent
107 * view from software and hardware.
108 *
109 * In order to keep updates to the RFD link field from colliding with
110 * hardware writes to mark packets complete, we use the feature that
111 * hardware will not write to a size 0 descriptor and mark the previous
112 * packet as end-of-list (EL). After updating the link, we remove EL
113 * and only then restore the size such that hardware may use the
114 * previous-to-end RFD.
115 *
116 * Under typical operation, the receive unit (RU) is start once,
117 * and the controller happily fills RFDs as frames arrive. If
118 * replacement RFDs cannot be allocated, or the RU goes non-active,
119 * the RU must be restarted. Frame arrival generates an interrupt,
120 * and Rx indication and re-allocation happen in the same context,
121 * therefore no locking is required. A software-generated interrupt
122 * is generated from the watchdog to recover from a failed allocation
123 * scenario where all Rx resources have been indicated and none re-
124 * placed.
125 *
126 * V. Miscellaneous
127 *
128 * VLAN offloading of tagging, stripping and filtering is not
129 * supported, but driver will accommodate the extra 4-byte VLAN tag
130 * for processing by upper layers. Tx/Rx Checksum offloading is not
131 * supported. Tx Scatter/Gather is not supported. Jumbo Frames is
132 * not supported (hardware limitation).
133 *
134 * MagicPacket(tm) WoL support is enabled/disabled via ethtool.
135 *
136 * Thanks to JC (jchapman@katalix.com) for helping with
137 * testing/troubleshooting the development driver.
138 *
139 * TODO:
140 * o several entry points race with dev->close
141 * o check for tx-no-resources/stop Q races with tx clean/wake Q
142 *
143 * FIXES:
144 * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
145 * - Stratus87247: protect MDI control register manipulations
146 * 2009/06/01 - Andreas Mohr <andi at lisas dot de>
147 * - add clean lowlevel I/O emulation for cards with MII-lacking PHYs
148 */
149
150 #include <linux/module.h>
151 #include <linux/moduleparam.h>
152 #include <linux/kernel.h>
153 #include <linux/types.h>
154 #include <linux/slab.h>
155 #include <linux/delay.h>
156 #include <linux/init.h>
157 #include <linux/pci.h>
158 #include <linux/dma-mapping.h>
159 #include <linux/netdevice.h>
160 #include <linux/etherdevice.h>
161 #include <linux/mii.h>
162 #include <linux/if_vlan.h>
163 #include <linux/skbuff.h>
164 #include <linux/ethtool.h>
165 #include <linux/string.h>
166 #include <linux/firmware.h>
167 #include <asm/unaligned.h>
168
169
170 #define DRV_NAME "e100"
171 #define DRV_EXT "-NAPI"
172 #define DRV_VERSION "3.5.24-k2"DRV_EXT
173 #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
174 #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
175 #define PFX DRV_NAME ": "
176
177 #define E100_WATCHDOG_PERIOD (2 * HZ)
178 #define E100_NAPI_WEIGHT 16
179
180 #define FIRMWARE_D101M "e100/d101m_ucode.bin"
181 #define FIRMWARE_D101S "e100/d101s_ucode.bin"
182 #define FIRMWARE_D102E "e100/d102e_ucode.bin"
183
184 MODULE_DESCRIPTION(DRV_DESCRIPTION);
185 MODULE_AUTHOR(DRV_COPYRIGHT);
186 MODULE_LICENSE("GPL");
187 MODULE_VERSION(DRV_VERSION);
188 MODULE_FIRMWARE(FIRMWARE_D101M);
189 MODULE_FIRMWARE(FIRMWARE_D101S);
190 MODULE_FIRMWARE(FIRMWARE_D102E);
191
192 static int debug = 3;
193 static int eeprom_bad_csum_allow = 0;
194 static int use_io = 0;
195 module_param(debug, int, 0);
196 module_param(eeprom_bad_csum_allow, int, 0);
197 module_param(use_io, int, 0);
198 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
199 MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
200 MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
201 #define DPRINTK(nlevel, klevel, fmt, args...) \
202 (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
203 printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
204 __func__ , ## args))
205
206 #define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
207 PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
208 PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
209 static struct pci_device_id e100_id_table[] = {
210 INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
211 INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
212 INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
213 INTEL_8255X_ETHERNET_DEVICE(0x1032, 3),
214 INTEL_8255X_ETHERNET_DEVICE(0x1033, 3),
215 INTEL_8255X_ETHERNET_DEVICE(0x1034, 3),
216 INTEL_8255X_ETHERNET_DEVICE(0x1038, 3),
217 INTEL_8255X_ETHERNET_DEVICE(0x1039, 4),
218 INTEL_8255X_ETHERNET_DEVICE(0x103A, 4),
219 INTEL_8255X_ETHERNET_DEVICE(0x103B, 4),
220 INTEL_8255X_ETHERNET_DEVICE(0x103C, 4),
221 INTEL_8255X_ETHERNET_DEVICE(0x103D, 4),
222 INTEL_8255X_ETHERNET_DEVICE(0x103E, 4),
223 INTEL_8255X_ETHERNET_DEVICE(0x1050, 5),
224 INTEL_8255X_ETHERNET_DEVICE(0x1051, 5),
225 INTEL_8255X_ETHERNET_DEVICE(0x1052, 5),
226 INTEL_8255X_ETHERNET_DEVICE(0x1053, 5),
227 INTEL_8255X_ETHERNET_DEVICE(0x1054, 5),
228 INTEL_8255X_ETHERNET_DEVICE(0x1055, 5),
229 INTEL_8255X_ETHERNET_DEVICE(0x1056, 5),
230 INTEL_8255X_ETHERNET_DEVICE(0x1057, 5),
231 INTEL_8255X_ETHERNET_DEVICE(0x1059, 0),
232 INTEL_8255X_ETHERNET_DEVICE(0x1064, 6),
233 INTEL_8255X_ETHERNET_DEVICE(0x1065, 6),
234 INTEL_8255X_ETHERNET_DEVICE(0x1066, 6),
235 INTEL_8255X_ETHERNET_DEVICE(0x1067, 6),
236 INTEL_8255X_ETHERNET_DEVICE(0x1068, 6),
237 INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
238 INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
239 INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
240 INTEL_8255X_ETHERNET_DEVICE(0x1091, 7),
241 INTEL_8255X_ETHERNET_DEVICE(0x1092, 7),
242 INTEL_8255X_ETHERNET_DEVICE(0x1093, 7),
243 INTEL_8255X_ETHERNET_DEVICE(0x1094, 7),
244 INTEL_8255X_ETHERNET_DEVICE(0x1095, 7),
245 INTEL_8255X_ETHERNET_DEVICE(0x10fe, 7),
246 INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
247 INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
248 INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
249 INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
250 INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
251 INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7),
252 { 0, }
253 };
254 MODULE_DEVICE_TABLE(pci, e100_id_table);
255
256 enum mac {
257 mac_82557_D100_A = 0,
258 mac_82557_D100_B = 1,
259 mac_82557_D100_C = 2,
260 mac_82558_D101_A4 = 4,
261 mac_82558_D101_B0 = 5,
262 mac_82559_D101M = 8,
263 mac_82559_D101S = 9,
264 mac_82550_D102 = 12,
265 mac_82550_D102_C = 13,
266 mac_82551_E = 14,
267 mac_82551_F = 15,
268 mac_82551_10 = 16,
269 mac_unknown = 0xFF,
270 };
271
272 enum phy {
273 phy_100a = 0x000003E0,
274 phy_100c = 0x035002A8,
275 phy_82555_tx = 0x015002A8,
276 phy_nsc_tx = 0x5C002000,
277 phy_82562_et = 0x033002A8,
278 phy_82562_em = 0x032002A8,
279 phy_82562_ek = 0x031002A8,
280 phy_82562_eh = 0x017002A8,
281 phy_82552_v = 0xd061004d,
282 phy_unknown = 0xFFFFFFFF,
283 };
284
285 /* CSR (Control/Status Registers) */
286 struct csr {
287 struct {
288 u8 status;
289 u8 stat_ack;
290 u8 cmd_lo;
291 u8 cmd_hi;
292 u32 gen_ptr;
293 } scb;
294 u32 port;
295 u16 flash_ctrl;
296 u8 eeprom_ctrl_lo;
297 u8 eeprom_ctrl_hi;
298 u32 mdi_ctrl;
299 u32 rx_dma_count;
300 };
301
302 enum scb_status {
303 rus_no_res = 0x08,
304 rus_ready = 0x10,
305 rus_mask = 0x3C,
306 };
307
308 enum ru_state {
309 RU_SUSPENDED = 0,
310 RU_RUNNING = 1,
311 RU_UNINITIALIZED = -1,
312 };
313
314 enum scb_stat_ack {
315 stat_ack_not_ours = 0x00,
316 stat_ack_sw_gen = 0x04,
317 stat_ack_rnr = 0x10,
318 stat_ack_cu_idle = 0x20,
319 stat_ack_frame_rx = 0x40,
320 stat_ack_cu_cmd_done = 0x80,
321 stat_ack_not_present = 0xFF,
322 stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
323 stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
324 };
325
326 enum scb_cmd_hi {
327 irq_mask_none = 0x00,
328 irq_mask_all = 0x01,
329 irq_sw_gen = 0x02,
330 };
331
332 enum scb_cmd_lo {
333 cuc_nop = 0x00,
334 ruc_start = 0x01,
335 ruc_load_base = 0x06,
336 cuc_start = 0x10,
337 cuc_resume = 0x20,
338 cuc_dump_addr = 0x40,
339 cuc_dump_stats = 0x50,
340 cuc_load_base = 0x60,
341 cuc_dump_reset = 0x70,
342 };
343
344 enum cuc_dump {
345 cuc_dump_complete = 0x0000A005,
346 cuc_dump_reset_complete = 0x0000A007,
347 };
348
349 enum port {
350 software_reset = 0x0000,
351 selftest = 0x0001,
352 selective_reset = 0x0002,
353 };
354
355 enum eeprom_ctrl_lo {
356 eesk = 0x01,
357 eecs = 0x02,
358 eedi = 0x04,
359 eedo = 0x08,
360 };
361
362 enum mdi_ctrl {
363 mdi_write = 0x04000000,
364 mdi_read = 0x08000000,
365 mdi_ready = 0x10000000,
366 };
367
368 enum eeprom_op {
369 op_write = 0x05,
370 op_read = 0x06,
371 op_ewds = 0x10,
372 op_ewen = 0x13,
373 };
374
375 enum eeprom_offsets {
376 eeprom_cnfg_mdix = 0x03,
377 eeprom_phy_iface = 0x06,
378 eeprom_id = 0x0A,
379 eeprom_config_asf = 0x0D,
380 eeprom_smbus_addr = 0x90,
381 };
382
383 enum eeprom_cnfg_mdix {
384 eeprom_mdix_enabled = 0x0080,
385 };
386
387 enum eeprom_phy_iface {
388 NoSuchPhy = 0,
389 I82553AB,
390 I82553C,
391 I82503,
392 DP83840,
393 S80C240,
394 S80C24,
395 I82555,
396 DP83840A = 10,
397 };
398
399 enum eeprom_id {
400 eeprom_id_wol = 0x0020,
401 };
402
403 enum eeprom_config_asf {
404 eeprom_asf = 0x8000,
405 eeprom_gcl = 0x4000,
406 };
407
408 enum cb_status {
409 cb_complete = 0x8000,
410 cb_ok = 0x2000,
411 };
412
413 enum cb_command {
414 cb_nop = 0x0000,
415 cb_iaaddr = 0x0001,
416 cb_config = 0x0002,
417 cb_multi = 0x0003,
418 cb_tx = 0x0004,
419 cb_ucode = 0x0005,
420 cb_dump = 0x0006,
421 cb_tx_sf = 0x0008,
422 cb_cid = 0x1f00,
423 cb_i = 0x2000,
424 cb_s = 0x4000,
425 cb_el = 0x8000,
426 };
427
428 struct rfd {
429 __le16 status;
430 __le16 command;
431 __le32 link;
432 __le32 rbd;
433 __le16 actual_size;
434 __le16 size;
435 };
436
437 struct rx {
438 struct rx *next, *prev;
439 struct sk_buff *skb;
440 dma_addr_t dma_addr;
441 };
442
443 #if defined(__BIG_ENDIAN_BITFIELD)
444 #define X(a,b) b,a
445 #else
446 #define X(a,b) a,b
447 #endif
448 struct config {
449 /*0*/ u8 X(byte_count:6, pad0:2);
450 /*1*/ u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1);
451 /*2*/ u8 adaptive_ifs;
452 /*3*/ u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1),
453 term_write_cache_line:1), pad3:4);
454 /*4*/ u8 X(rx_dma_max_count:7, pad4:1);
455 /*5*/ u8 X(tx_dma_max_count:7, dma_max_count_enable:1);
456 /*6*/ u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1),
457 tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1),
458 rx_discard_overruns:1), rx_save_bad_frames:1);
459 /*7*/ u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2),
460 pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1),
461 tx_dynamic_tbd:1);
462 /*8*/ u8 X(X(mii_mode:1, pad8:6), csma_disabled:1);
463 /*9*/ u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1),
464 link_status_wake:1), arp_wake:1), mcmatch_wake:1);
465 /*10*/ u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2),
466 loopback:2);
467 /*11*/ u8 X(linear_priority:3, pad11:5);
468 /*12*/ u8 X(X(linear_priority_mode:1, pad12:3), ifs:4);
469 /*13*/ u8 ip_addr_lo;
470 /*14*/ u8 ip_addr_hi;
471 /*15*/ u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1),
472 wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1),
473 pad15_2:1), crs_or_cdt:1);
474 /*16*/ u8 fc_delay_lo;
475 /*17*/ u8 fc_delay_hi;
476 /*18*/ u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1),
477 rx_long_ok:1), fc_priority_threshold:3), pad18:1);
478 /*19*/ u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1),
479 fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1),
480 full_duplex_force:1), full_duplex_pin:1);
481 /*20*/ u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1);
482 /*21*/ u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4);
483 /*22*/ u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6);
484 u8 pad_d102[9];
485 };
486
487 #define E100_MAX_MULTICAST_ADDRS 64
488 struct multi {
489 __le16 count;
490 u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
491 };
492
493 /* Important: keep total struct u32-aligned */
494 #define UCODE_SIZE 134
495 struct cb {
496 __le16 status;
497 __le16 command;
498 __le32 link;
499 union {
500 u8 iaaddr[ETH_ALEN];
501 __le32 ucode[UCODE_SIZE];
502 struct config config;
503 struct multi multi;
504 struct {
505 u32 tbd_array;
506 u16 tcb_byte_count;
507 u8 threshold;
508 u8 tbd_count;
509 struct {
510 __le32 buf_addr;
511 __le16 size;
512 u16 eol;
513 } tbd;
514 } tcb;
515 __le32 dump_buffer_addr;
516 } u;
517 struct cb *next, *prev;
518 dma_addr_t dma_addr;
519 struct sk_buff *skb;
520 };
521
522 enum loopback {
523 lb_none = 0, lb_mac = 1, lb_phy = 3,
524 };
525
526 struct stats {
527 __le32 tx_good_frames, tx_max_collisions, tx_late_collisions,
528 tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
529 tx_multiple_collisions, tx_total_collisions;
530 __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
531 rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
532 rx_short_frame_errors;
533 __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
534 __le16 xmt_tco_frames, rcv_tco_frames;
535 __le32 complete;
536 };
537
538 struct mem {
539 struct {
540 u32 signature;
541 u32 result;
542 } selftest;
543 struct stats stats;
544 u8 dump_buf[596];
545 };
546
547 struct param_range {
548 u32 min;
549 u32 max;
550 u32 count;
551 };
552
553 struct params {
554 struct param_range rfds;
555 struct param_range cbs;
556 };
557
558 struct nic {
559 /* Begin: frequently used values: keep adjacent for cache effect */
560 u32 msg_enable ____cacheline_aligned;
561 struct net_device *netdev;
562 struct pci_dev *pdev;
563 u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data);
564
565 struct rx *rxs ____cacheline_aligned;
566 struct rx *rx_to_use;
567 struct rx *rx_to_clean;
568 struct rfd blank_rfd;
569 enum ru_state ru_running;
570
571 spinlock_t cb_lock ____cacheline_aligned;
572 spinlock_t cmd_lock;
573 struct csr __iomem *csr;
574 enum scb_cmd_lo cuc_cmd;
575 unsigned int cbs_avail;
576 struct napi_struct napi;
577 struct cb *cbs;
578 struct cb *cb_to_use;
579 struct cb *cb_to_send;
580 struct cb *cb_to_clean;
581 __le16 tx_command;
582 /* End: frequently used values: keep adjacent for cache effect */
583
584 enum {
585 ich = (1 << 0),
586 promiscuous = (1 << 1),
587 multicast_all = (1 << 2),
588 wol_magic = (1 << 3),
589 ich_10h_workaround = (1 << 4),
590 } flags ____cacheline_aligned;
591
592 enum mac mac;
593 enum phy phy;
594 struct params params;
595 struct timer_list watchdog;
596 struct timer_list blink_timer;
597 struct mii_if_info mii;
598 struct work_struct tx_timeout_task;
599 enum loopback loopback;
600
601 struct mem *mem;
602 dma_addr_t dma_addr;
603
604 dma_addr_t cbs_dma_addr;
605 u8 adaptive_ifs;
606 u8 tx_threshold;
607 u32 tx_frames;
608 u32 tx_collisions;
609 u32 tx_deferred;
610 u32 tx_single_collisions;
611 u32 tx_multiple_collisions;
612 u32 tx_fc_pause;
613 u32 tx_tco_frames;
614
615 u32 rx_fc_pause;
616 u32 rx_fc_unsupported;
617 u32 rx_tco_frames;
618 u32 rx_over_length_errors;
619
620 u16 leds;
621 u16 eeprom_wc;
622 __le16 eeprom[256];
623 spinlock_t mdio_lock;
624 };
625
626 static inline void e100_write_flush(struct nic *nic)
627 {
628 /* Flush previous PCI writes through intermediate bridges
629 * by doing a benign read */
630 (void)ioread8(&nic->csr->scb.status);
631 }
632
633 static void e100_enable_irq(struct nic *nic)
634 {
635 unsigned long flags;
636
637 spin_lock_irqsave(&nic->cmd_lock, flags);
638 iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
639 e100_write_flush(nic);
640 spin_unlock_irqrestore(&nic->cmd_lock, flags);
641 }
642
643 static void e100_disable_irq(struct nic *nic)
644 {
645 unsigned long flags;
646
647 spin_lock_irqsave(&nic->cmd_lock, flags);
648 iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
649 e100_write_flush(nic);
650 spin_unlock_irqrestore(&nic->cmd_lock, flags);
651 }
652
653 static void e100_hw_reset(struct nic *nic)
654 {
655 /* Put CU and RU into idle with a selective reset to get
656 * device off of PCI bus */
657 iowrite32(selective_reset, &nic->csr->port);
658 e100_write_flush(nic); udelay(20);
659
660 /* Now fully reset device */
661 iowrite32(software_reset, &nic->csr->port);
662 e100_write_flush(nic); udelay(20);
663
664 /* Mask off our interrupt line - it's unmasked after reset */
665 e100_disable_irq(nic);
666 }
667
668 static int e100_self_test(struct nic *nic)
669 {
670 u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest);
671
672 /* Passing the self-test is a pretty good indication
673 * that the device can DMA to/from host memory */
674
675 nic->mem->selftest.signature = 0;
676 nic->mem->selftest.result = 0xFFFFFFFF;
677
678 iowrite32(selftest | dma_addr, &nic->csr->port);
679 e100_write_flush(nic);
680 /* Wait 10 msec for self-test to complete */
681 msleep(10);
682
683 /* Interrupts are enabled after self-test */
684 e100_disable_irq(nic);
685
686 /* Check results of self-test */
687 if (nic->mem->selftest.result != 0) {
688 DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n",
689 nic->mem->selftest.result);
690 return -ETIMEDOUT;
691 }
692 if (nic->mem->selftest.signature == 0) {
693 DPRINTK(HW, ERR, "Self-test failed: timed out\n");
694 return -ETIMEDOUT;
695 }
696
697 return 0;
698 }
699
700 static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data)
701 {
702 u32 cmd_addr_data[3];
703 u8 ctrl;
704 int i, j;
705
706 /* Three cmds: write/erase enable, write data, write/erase disable */
707 cmd_addr_data[0] = op_ewen << (addr_len - 2);
708 cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
709 le16_to_cpu(data);
710 cmd_addr_data[2] = op_ewds << (addr_len - 2);
711
712 /* Bit-bang cmds to write word to eeprom */
713 for (j = 0; j < 3; j++) {
714
715 /* Chip select */
716 iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
717 e100_write_flush(nic); udelay(4);
718
719 for (i = 31; i >= 0; i--) {
720 ctrl = (cmd_addr_data[j] & (1 << i)) ?
721 eecs | eedi : eecs;
722 iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
723 e100_write_flush(nic); udelay(4);
724
725 iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
726 e100_write_flush(nic); udelay(4);
727 }
728 /* Wait 10 msec for cmd to complete */
729 msleep(10);
730
731 /* Chip deselect */
732 iowrite8(0, &nic->csr->eeprom_ctrl_lo);
733 e100_write_flush(nic); udelay(4);
734 }
735 };
736
737 /* General technique stolen from the eepro100 driver - very clever */
738 static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
739 {
740 u32 cmd_addr_data;
741 u16 data = 0;
742 u8 ctrl;
743 int i;
744
745 cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
746
747 /* Chip select */
748 iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
749 e100_write_flush(nic); udelay(4);
750
751 /* Bit-bang to read word from eeprom */
752 for (i = 31; i >= 0; i--) {
753 ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
754 iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
755 e100_write_flush(nic); udelay(4);
756
757 iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
758 e100_write_flush(nic); udelay(4);
759
760 /* Eeprom drives a dummy zero to EEDO after receiving
761 * complete address. Use this to adjust addr_len. */
762 ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
763 if (!(ctrl & eedo) && i > 16) {
764 *addr_len -= (i - 16);
765 i = 17;
766 }
767
768 data = (data << 1) | (ctrl & eedo ? 1 : 0);
769 }
770
771 /* Chip deselect */
772 iowrite8(0, &nic->csr->eeprom_ctrl_lo);
773 e100_write_flush(nic); udelay(4);
774
775 return cpu_to_le16(data);
776 };
777
778 /* Load entire EEPROM image into driver cache and validate checksum */
779 static int e100_eeprom_load(struct nic *nic)
780 {
781 u16 addr, addr_len = 8, checksum = 0;
782
783 /* Try reading with an 8-bit addr len to discover actual addr len */
784 e100_eeprom_read(nic, &addr_len, 0);
785 nic->eeprom_wc = 1 << addr_len;
786
787 for (addr = 0; addr < nic->eeprom_wc; addr++) {
788 nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
789 if (addr < nic->eeprom_wc - 1)
790 checksum += le16_to_cpu(nic->eeprom[addr]);
791 }
792
793 /* The checksum, stored in the last word, is calculated such that
794 * the sum of words should be 0xBABA */
795 if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
796 DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
797 if (!eeprom_bad_csum_allow)
798 return -EAGAIN;
799 }
800
801 return 0;
802 }
803
804 /* Save (portion of) driver EEPROM cache to device and update checksum */
805 static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
806 {
807 u16 addr, addr_len = 8, checksum = 0;
808
809 /* Try reading with an 8-bit addr len to discover actual addr len */
810 e100_eeprom_read(nic, &addr_len, 0);
811 nic->eeprom_wc = 1 << addr_len;
812
813 if (start + count >= nic->eeprom_wc)
814 return -EINVAL;
815
816 for (addr = start; addr < start + count; addr++)
817 e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]);
818
819 /* The checksum, stored in the last word, is calculated such that
820 * the sum of words should be 0xBABA */
821 for (addr = 0; addr < nic->eeprom_wc - 1; addr++)
822 checksum += le16_to_cpu(nic->eeprom[addr]);
823 nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum);
824 e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
825 nic->eeprom[nic->eeprom_wc - 1]);
826
827 return 0;
828 }
829
830 #define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
831 #define E100_WAIT_SCB_FAST 20 /* delay like the old code */
832 static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
833 {
834 unsigned long flags;
835 unsigned int i;
836 int err = 0;
837
838 spin_lock_irqsave(&nic->cmd_lock, flags);
839
840 /* Previous command is accepted when SCB clears */
841 for (i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
842 if (likely(!ioread8(&nic->csr->scb.cmd_lo)))
843 break;
844 cpu_relax();
845 if (unlikely(i > E100_WAIT_SCB_FAST))
846 udelay(5);
847 }
848 if (unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
849 err = -EAGAIN;
850 goto err_unlock;
851 }
852
853 if (unlikely(cmd != cuc_resume))
854 iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
855 iowrite8(cmd, &nic->csr->scb.cmd_lo);
856
857 err_unlock:
858 spin_unlock_irqrestore(&nic->cmd_lock, flags);
859
860 return err;
861 }
862
863 static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
864 void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
865 {
866 struct cb *cb;
867 unsigned long flags;
868 int err = 0;
869
870 spin_lock_irqsave(&nic->cb_lock, flags);
871
872 if (unlikely(!nic->cbs_avail)) {
873 err = -ENOMEM;
874 goto err_unlock;
875 }
876
877 cb = nic->cb_to_use;
878 nic->cb_to_use = cb->next;
879 nic->cbs_avail--;
880 cb->skb = skb;
881
882 if (unlikely(!nic->cbs_avail))
883 err = -ENOSPC;
884
885 cb_prepare(nic, cb, skb);
886
887 /* Order is important otherwise we'll be in a race with h/w:
888 * set S-bit in current first, then clear S-bit in previous. */
889 cb->command |= cpu_to_le16(cb_s);
890 wmb();
891 cb->prev->command &= cpu_to_le16(~cb_s);
892
893 while (nic->cb_to_send != nic->cb_to_use) {
894 if (unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
895 nic->cb_to_send->dma_addr))) {
896 /* Ok, here's where things get sticky. It's
897 * possible that we can't schedule the command
898 * because the controller is too busy, so
899 * let's just queue the command and try again
900 * when another command is scheduled. */
901 if (err == -ENOSPC) {
902 //request a reset
903 schedule_work(&nic->tx_timeout_task);
904 }
905 break;
906 } else {
907 nic->cuc_cmd = cuc_resume;
908 nic->cb_to_send = nic->cb_to_send->next;
909 }
910 }
911
912 err_unlock:
913 spin_unlock_irqrestore(&nic->cb_lock, flags);
914
915 return err;
916 }
917
918 static int mdio_read(struct net_device *netdev, int addr, int reg)
919 {
920 struct nic *nic = netdev_priv(netdev);
921 return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0);
922 }
923
924 static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
925 {
926 struct nic *nic = netdev_priv(netdev);
927
928 nic->mdio_ctrl(nic, addr, mdi_write, reg, data);
929 }
930
931 /* the standard mdio_ctrl() function for usual MII-compliant hardware */
932 static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
933 {
934 u32 data_out = 0;
935 unsigned int i;
936 unsigned long flags;
937
938
939 /*
940 * Stratus87247: we shouldn't be writing the MDI control
941 * register until the Ready bit shows True. Also, since
942 * manipulation of the MDI control registers is a multi-step
943 * procedure it should be done under lock.
944 */
945 spin_lock_irqsave(&nic->mdio_lock, flags);
946 for (i = 100; i; --i) {
947 if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
948 break;
949 udelay(20);
950 }
951 if (unlikely(!i)) {
952 printk("e100.mdio_ctrl(%s) won't go Ready\n",
953 nic->netdev->name );
954 spin_unlock_irqrestore(&nic->mdio_lock, flags);
955 return 0; /* No way to indicate timeout error */
956 }
957 iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
958
959 for (i = 0; i < 100; i++) {
960 udelay(20);
961 if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
962 break;
963 }
964 spin_unlock_irqrestore(&nic->mdio_lock, flags);
965 DPRINTK(HW, DEBUG,
966 "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
967 dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
968 return (u16)data_out;
969 }
970
971 /* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */
972 static u16 mdio_ctrl_phy_82552_v(struct nic *nic,
973 u32 addr,
974 u32 dir,
975 u32 reg,
976 u16 data)
977 {
978 if ((reg == MII_BMCR) && (dir == mdi_write)) {
979 if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) {
980 u16 advert = mdio_read(nic->netdev, nic->mii.phy_id,
981 MII_ADVERTISE);
982
983 /*
984 * Workaround Si issue where sometimes the part will not
985 * autoneg to 100Mbps even when advertised.
986 */
987 if (advert & ADVERTISE_100FULL)
988 data |= BMCR_SPEED100 | BMCR_FULLDPLX;
989 else if (advert & ADVERTISE_100HALF)
990 data |= BMCR_SPEED100;
991 }
992 }
993 return mdio_ctrl_hw(nic, addr, dir, reg, data);
994 }
995
996 /* Fully software-emulated mdio_ctrl() function for cards without
997 * MII-compliant PHYs.
998 * For now, this is mainly geared towards 80c24 support; in case of further
999 * requirements for other types (i82503, ...?) either extend this mechanism
1000 * or split it, whichever is cleaner.
1001 */
1002 static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic,
1003 u32 addr,
1004 u32 dir,
1005 u32 reg,
1006 u16 data)
1007 {
1008 /* might need to allocate a netdev_priv'ed register array eventually
1009 * to be able to record state changes, but for now
1010 * some fully hardcoded register handling ought to be ok I guess. */
1011
1012 if (dir == mdi_read) {
1013 switch (reg) {
1014 case MII_BMCR:
1015 /* Auto-negotiation, right? */
1016 return BMCR_ANENABLE |
1017 BMCR_FULLDPLX;
1018 case MII_BMSR:
1019 return BMSR_LSTATUS /* for mii_link_ok() */ |
1020 BMSR_ANEGCAPABLE |
1021 BMSR_10FULL;
1022 case MII_ADVERTISE:
1023 /* 80c24 is a "combo card" PHY, right? */
1024 return ADVERTISE_10HALF |
1025 ADVERTISE_10FULL;
1026 default:
1027 DPRINTK(HW, DEBUG,
1028 "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
1029 dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
1030 return 0xFFFF;
1031 }
1032 } else {
1033 switch (reg) {
1034 default:
1035 DPRINTK(HW, DEBUG,
1036 "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
1037 dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
1038 return 0xFFFF;
1039 }
1040 }
1041 }
1042 static inline int e100_phy_supports_mii(struct nic *nic)
1043 {
1044 /* for now, just check it by comparing whether we
1045 are using MII software emulation.
1046 */
1047 return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated);
1048 }
1049
1050 static void e100_get_defaults(struct nic *nic)
1051 {
1052 struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
1053 struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
1054
1055 /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
1056 nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
1057 if (nic->mac == mac_unknown)
1058 nic->mac = mac_82557_D100_A;
1059
1060 nic->params.rfds = rfds;
1061 nic->params.cbs = cbs;
1062
1063 /* Quadwords to DMA into FIFO before starting frame transmit */
1064 nic->tx_threshold = 0xE0;
1065
1066 /* no interrupt for every tx completion, delay = 256us if not 557 */
1067 nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
1068 ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
1069
1070 /* Template for a freshly allocated RFD */
1071 nic->blank_rfd.command = 0;
1072 nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
1073 nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
1074
1075 /* MII setup */
1076 nic->mii.phy_id_mask = 0x1F;
1077 nic->mii.reg_num_mask = 0x1F;
1078 nic->mii.dev = nic->netdev;
1079 nic->mii.mdio_read = mdio_read;
1080 nic->mii.mdio_write = mdio_write;
1081 }
1082
1083 static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
1084 {
1085 struct config *config = &cb->u.config;
1086 u8 *c = (u8 *)config;
1087
1088 cb->command = cpu_to_le16(cb_config);
1089
1090 memset(config, 0, sizeof(struct config));
1091
1092 config->byte_count = 0x16; /* bytes in this struct */
1093 config->rx_fifo_limit = 0x8; /* bytes in FIFO before DMA */
1094 config->direct_rx_dma = 0x1; /* reserved */
1095 config->standard_tcb = 0x1; /* 1=standard, 0=extended */
1096 config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */
1097 config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */
1098 config->tx_underrun_retry = 0x3; /* # of underrun retries */
1099 if (e100_phy_supports_mii(nic))
1100 config->mii_mode = 1; /* 1=MII mode, 0=i82503 mode */
1101 config->pad10 = 0x6;
1102 config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */
1103 config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */
1104 config->ifs = 0x6; /* x16 = inter frame spacing */
1105 config->ip_addr_hi = 0xF2; /* ARP IP filter - not used */
1106 config->pad15_1 = 0x1;
1107 config->pad15_2 = 0x1;
1108 config->crs_or_cdt = 0x0; /* 0=CRS only, 1=CRS or CDT */
1109 config->fc_delay_hi = 0x40; /* time delay for fc frame */
1110 config->tx_padding = 0x1; /* 1=pad short frames */
1111 config->fc_priority_threshold = 0x7; /* 7=priority fc disabled */
1112 config->pad18 = 0x1;
1113 config->full_duplex_pin = 0x1; /* 1=examine FDX# pin */
1114 config->pad20_1 = 0x1F;
1115 config->fc_priority_location = 0x1; /* 1=byte#31, 0=byte#19 */
1116 config->pad21_1 = 0x5;
1117
1118 config->adaptive_ifs = nic->adaptive_ifs;
1119 config->loopback = nic->loopback;
1120
1121 if (nic->mii.force_media && nic->mii.full_duplex)
1122 config->full_duplex_force = 0x1; /* 1=force, 0=auto */
1123
1124 if (nic->flags & promiscuous || nic->loopback) {
1125 config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */
1126 config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */
1127 config->promiscuous_mode = 0x1; /* 1=on, 0=off */
1128 }
1129
1130 if (nic->flags & multicast_all)
1131 config->multicast_all = 0x1; /* 1=accept, 0=no */
1132
1133 /* disable WoL when up */
1134 if (netif_running(nic->netdev) || !(nic->flags & wol_magic))
1135 config->magic_packet_disable = 0x1; /* 1=off, 0=on */
1136
1137 if (nic->mac >= mac_82558_D101_A4) {
1138 config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */
1139 config->mwi_enable = 0x1; /* 1=enable, 0=disable */
1140 config->standard_tcb = 0x0; /* 1=standard, 0=extended */
1141 config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */
1142 if (nic->mac >= mac_82559_D101M) {
1143 config->tno_intr = 0x1; /* TCO stats enable */
1144 /* Enable TCO in extended config */
1145 if (nic->mac >= mac_82551_10) {
1146 config->byte_count = 0x20; /* extended bytes */
1147 config->rx_d102_mode = 0x1; /* GMRC for TCO */
1148 }
1149 } else {
1150 config->standard_stat_counter = 0x0;
1151 }
1152 }
1153
1154 DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
1155 c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
1156 DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
1157 c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
1158 DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
1159 c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
1160 }
1161
1162 /*************************************************************************
1163 * CPUSaver parameters
1164 *
1165 * All CPUSaver parameters are 16-bit literals that are part of a
1166 * "move immediate value" instruction. By changing the value of
1167 * the literal in the instruction before the code is loaded, the
1168 * driver can change the algorithm.
1169 *
1170 * INTDELAY - This loads the dead-man timer with its initial value.
1171 * When this timer expires the interrupt is asserted, and the
1172 * timer is reset each time a new packet is received. (see
1173 * BUNDLEMAX below to set the limit on number of chained packets)
1174 * The current default is 0x600 or 1536. Experiments show that
1175 * the value should probably stay within the 0x200 - 0x1000.
1176 *
1177 * BUNDLEMAX -
1178 * This sets the maximum number of frames that will be bundled. In
1179 * some situations, such as the TCP windowing algorithm, it may be
1180 * better to limit the growth of the bundle size than let it go as
1181 * high as it can, because that could cause too much added latency.
1182 * The default is six, because this is the number of packets in the
1183 * default TCP window size. A value of 1 would make CPUSaver indicate
1184 * an interrupt for every frame received. If you do not want to put
1185 * a limit on the bundle size, set this value to xFFFF.
1186 *
1187 * BUNDLESMALL -
1188 * This contains a bit-mask describing the minimum size frame that
1189 * will be bundled. The default masks the lower 7 bits, which means
1190 * that any frame less than 128 bytes in length will not be bundled,
1191 * but will instead immediately generate an interrupt. This does
1192 * not affect the current bundle in any way. Any frame that is 128
1193 * bytes or large will be bundled normally. This feature is meant
1194 * to provide immediate indication of ACK frames in a TCP environment.
1195 * Customers were seeing poor performance when a machine with CPUSaver
1196 * enabled was sending but not receiving. The delay introduced when
1197 * the ACKs were received was enough to reduce total throughput, because
1198 * the sender would sit idle until the ACK was finally seen.
1199 *
1200 * The current default is 0xFF80, which masks out the lower 7 bits.
1201 * This means that any frame which is x7F (127) bytes or smaller
1202 * will cause an immediate interrupt. Because this value must be a
1203 * bit mask, there are only a few valid values that can be used. To
1204 * turn this feature off, the driver can write the value xFFFF to the
1205 * lower word of this instruction (in the same way that the other
1206 * parameters are used). Likewise, a value of 0xF800 (2047) would
1207 * cause an interrupt to be generated for every frame, because all
1208 * standard Ethernet frames are <= 2047 bytes in length.
1209 *************************************************************************/
1210
1211 /* if you wish to disable the ucode functionality, while maintaining the
1212 * workarounds it provides, set the following defines to:
1213 * BUNDLESMALL 0
1214 * BUNDLEMAX 1
1215 * INTDELAY 1
1216 */
1217 #define BUNDLESMALL 1
1218 #define BUNDLEMAX (u16)6
1219 #define INTDELAY (u16)1536 /* 0x600 */
1220
1221 /* Initialize firmware */
1222 static const struct firmware *e100_request_firmware(struct nic *nic)
1223 {
1224 const char *fw_name;
1225 const struct firmware *fw;
1226 u8 timer, bundle, min_size;
1227 int err;
1228
1229 /* do not load u-code for ICH devices */
1230 if (nic->flags & ich)
1231 return NULL;
1232
1233 /* Search for ucode match against h/w revision */
1234 if (nic->mac == mac_82559_D101M)
1235 fw_name = FIRMWARE_D101M;
1236 else if (nic->mac == mac_82559_D101S)
1237 fw_name = FIRMWARE_D101S;
1238 else if (nic->mac == mac_82551_F || nic->mac == mac_82551_10)
1239 fw_name = FIRMWARE_D102E;
1240 else /* No ucode on other devices */
1241 return NULL;
1242
1243 err = request_firmware(&fw, fw_name, &nic->pdev->dev);
1244 if (err) {
1245 DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n",
1246 fw_name, err);
1247 return ERR_PTR(err);
1248 }
1249 /* Firmware should be precisely UCODE_SIZE (words) plus three bytes
1250 indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
1251 if (fw->size != UCODE_SIZE * 4 + 3) {
1252 DPRINTK(PROBE, ERR, "Firmware \"%s\" has wrong size %zu\n",
1253 fw_name, fw->size);
1254 release_firmware(fw);
1255 return ERR_PTR(-EINVAL);
1256 }
1257
1258 /* Read timer, bundle and min_size from end of firmware blob */
1259 timer = fw->data[UCODE_SIZE * 4];
1260 bundle = fw->data[UCODE_SIZE * 4 + 1];
1261 min_size = fw->data[UCODE_SIZE * 4 + 2];
1262
1263 if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE ||
1264 min_size >= UCODE_SIZE) {
1265 DPRINTK(PROBE, ERR,
1266 "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
1267 fw_name, timer, bundle, min_size);
1268 release_firmware(fw);
1269 return ERR_PTR(-EINVAL);
1270 }
1271 /* OK, firmware is validated and ready to use... */
1272 return fw;
1273 }
1274
1275 static void e100_setup_ucode(struct nic *nic, struct cb *cb,
1276 struct sk_buff *skb)
1277 {
1278 const struct firmware *fw = (void *)skb;
1279 u8 timer, bundle, min_size;
1280
1281 /* It's not a real skb; we just abused the fact that e100_exec_cb
1282 will pass it through to here... */
1283 cb->skb = NULL;
1284
1285 /* firmware is stored as little endian already */
1286 memcpy(cb->u.ucode, fw->data, UCODE_SIZE * 4);
1287
1288 /* Read timer, bundle and min_size from end of firmware blob */
1289 timer = fw->data[UCODE_SIZE * 4];
1290 bundle = fw->data[UCODE_SIZE * 4 + 1];
1291 min_size = fw->data[UCODE_SIZE * 4 + 2];
1292
1293 /* Insert user-tunable settings in cb->u.ucode */
1294 cb->u.ucode[timer] &= cpu_to_le32(0xFFFF0000);
1295 cb->u.ucode[timer] |= cpu_to_le32(INTDELAY);
1296 cb->u.ucode[bundle] &= cpu_to_le32(0xFFFF0000);
1297 cb->u.ucode[bundle] |= cpu_to_le32(BUNDLEMAX);
1298 cb->u.ucode[min_size] &= cpu_to_le32(0xFFFF0000);
1299 cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
1300
1301 cb->command = cpu_to_le16(cb_ucode | cb_el);
1302 }
1303
1304 static inline int e100_load_ucode_wait(struct nic *nic)
1305 {
1306 const struct firmware *fw;
1307 int err = 0, counter = 50;
1308 struct cb *cb = nic->cb_to_clean;
1309
1310 fw = e100_request_firmware(nic);
1311 /* If it's NULL, then no ucode is required */
1312 if (!fw || IS_ERR(fw))
1313 return PTR_ERR(fw);
1314
1315 if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
1316 DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
1317
1318 /* must restart cuc */
1319 nic->cuc_cmd = cuc_start;
1320
1321 /* wait for completion */
1322 e100_write_flush(nic);
1323 udelay(10);
1324
1325 /* wait for possibly (ouch) 500ms */
1326 while (!(cb->status & cpu_to_le16(cb_complete))) {
1327 msleep(10);
1328 if (!--counter) break;
1329 }
1330
1331 /* ack any interrupts, something could have been set */
1332 iowrite8(~0, &nic->csr->scb.stat_ack);
1333
1334 /* if the command failed, or is not OK, notify and return */
1335 if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
1336 DPRINTK(PROBE,ERR, "ucode load failed\n");
1337 err = -EPERM;
1338 }
1339
1340 return err;
1341 }
1342
1343 static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
1344 struct sk_buff *skb)
1345 {
1346 cb->command = cpu_to_le16(cb_iaaddr);
1347 memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
1348 }
1349
1350 static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
1351 {
1352 cb->command = cpu_to_le16(cb_dump);
1353 cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
1354 offsetof(struct mem, dump_buf));
1355 }
1356
1357 static int e100_phy_check_without_mii(struct nic *nic)
1358 {
1359 u8 phy_type;
1360 int without_mii;
1361
1362 phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
1363
1364 switch (phy_type) {
1365 case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
1366 case I82503: /* Non-MII PHY; UNTESTED! */
1367 case S80C24: /* Non-MII PHY; tested and working */
1368 /* paragraph from the FreeBSD driver, "FXP_PHY_80C24":
1369 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
1370 * doesn't have a programming interface of any sort. The
1371 * media is sensed automatically based on how the link partner
1372 * is configured. This is, in essence, manual configuration.
1373 */
1374 DPRINTK(PROBE, INFO,
1375 "found MII-less i82503 or 80c24 or other PHY\n");
1376
1377 nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated;
1378 nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */
1379
1380 /* these might be needed for certain MII-less cards...
1381 * nic->flags |= ich;
1382 * nic->flags |= ich_10h_workaround; */
1383
1384 without_mii = 1;
1385 break;
1386 default:
1387 without_mii = 0;
1388 break;
1389 }
1390 return without_mii;
1391 }
1392
1393 #define NCONFIG_AUTO_SWITCH 0x0080
1394 #define MII_NSC_CONG MII_RESV1
1395 #define NSC_CONG_ENABLE 0x0100
1396 #define NSC_CONG_TXREADY 0x0400
1397 #define ADVERTISE_FC_SUPPORTED 0x0400
1398 static int e100_phy_init(struct nic *nic)
1399 {
1400 struct net_device *netdev = nic->netdev;
1401 u32 addr;
1402 u16 bmcr, stat, id_lo, id_hi, cong;
1403
1404 /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
1405 for (addr = 0; addr < 32; addr++) {
1406 nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr;
1407 bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
1408 stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
1409 stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
1410 if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
1411 break;
1412 }
1413 if (addr == 32) {
1414 /* uhoh, no PHY detected: check whether we seem to be some
1415 * weird, rare variant which is *known* to not have any MII.
1416 * But do this AFTER MII checking only, since this does
1417 * lookup of EEPROM values which may easily be unreliable. */
1418 if (e100_phy_check_without_mii(nic))
1419 return 0; /* simply return and hope for the best */
1420 else {
1421 /* for unknown cases log a fatal error */
1422 DPRINTK(HW, ERR,
1423 "Failed to locate any known PHY, aborting.\n");
1424 return -EAGAIN;
1425 }
1426 } else
1427 DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
1428
1429 /* Isolate all the PHY ids */
1430 for (addr = 0; addr < 32; addr++)
1431 mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
1432 /* Select the discovered PHY */
1433 bmcr &= ~BMCR_ISOLATE;
1434 mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
1435
1436 /* Get phy ID */
1437 id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
1438 id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
1439 nic->phy = (u32)id_hi << 16 | (u32)id_lo;
1440 DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
1441
1442 /* Handle National tx phys */
1443 #define NCS_PHY_MODEL_MASK 0xFFF0FFFF
1444 if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
1445 /* Disable congestion control */
1446 cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG);
1447 cong |= NSC_CONG_TXREADY;
1448 cong &= ~NSC_CONG_ENABLE;
1449 mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
1450 }
1451
1452 if (nic->phy == phy_82552_v) {
1453 u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
1454
1455 /* assign special tweaked mdio_ctrl() function */
1456 nic->mdio_ctrl = mdio_ctrl_phy_82552_v;
1457
1458 /* Workaround Si not advertising flow-control during autoneg */
1459 advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
1460 mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert);
1461
1462 /* Reset for the above changes to take effect */
1463 bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
1464 bmcr |= BMCR_RESET;
1465 mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
1466 } else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
1467 (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
1468 !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
1469 /* enable/disable MDI/MDI-X auto-switching. */
1470 mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
1471 nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
1472 }
1473
1474 return 0;
1475 }
1476
1477 static int e100_hw_init(struct nic *nic)
1478 {
1479 int err;
1480
1481 e100_hw_reset(nic);
1482
1483 DPRINTK(HW, ERR, "e100_hw_init\n");
1484 if (!in_interrupt() && (err = e100_self_test(nic)))
1485 return err;
1486
1487 if ((err = e100_phy_init(nic)))
1488 return err;
1489 if ((err = e100_exec_cmd(nic, cuc_load_base, 0)))
1490 return err;
1491 if ((err = e100_exec_cmd(nic, ruc_load_base, 0)))
1492 return err;
1493 if ((err = e100_load_ucode_wait(nic)))
1494 return err;
1495 if ((err = e100_exec_cb(nic, NULL, e100_configure)))
1496 return err;
1497 if ((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
1498 return err;
1499 if ((err = e100_exec_cmd(nic, cuc_dump_addr,
1500 nic->dma_addr + offsetof(struct mem, stats))))
1501 return err;
1502 if ((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
1503 return err;
1504
1505 e100_disable_irq(nic);
1506
1507 return 0;
1508 }
1509
1510 static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
1511 {
1512 struct net_device *netdev = nic->netdev;
1513 struct dev_mc_list *list = netdev->mc_list;
1514 u16 i, count = min(netdev->mc_count, E100_MAX_MULTICAST_ADDRS);
1515
1516 cb->command = cpu_to_le16(cb_multi);
1517 cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
1518 for (i = 0; list && i < count; i++, list = list->next)
1519 memcpy(&cb->u.multi.addr[i*ETH_ALEN], &list->dmi_addr,
1520 ETH_ALEN);
1521 }
1522
1523 static void e100_set_multicast_list(struct net_device *netdev)
1524 {
1525 struct nic *nic = netdev_priv(netdev);
1526
1527 DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
1528 netdev->mc_count, netdev->flags);
1529
1530 if (netdev->flags & IFF_PROMISC)
1531 nic->flags |= promiscuous;
1532 else
1533 nic->flags &= ~promiscuous;
1534
1535 if (netdev->flags & IFF_ALLMULTI ||
1536 netdev->mc_count > E100_MAX_MULTICAST_ADDRS)
1537 nic->flags |= multicast_all;
1538 else
1539 nic->flags &= ~multicast_all;
1540
1541 e100_exec_cb(nic, NULL, e100_configure);
1542 e100_exec_cb(nic, NULL, e100_multi);
1543 }
1544
1545 static void e100_update_stats(struct nic *nic)
1546 {
1547 struct net_device *dev = nic->netdev;
1548 struct net_device_stats *ns = &dev->stats;
1549 struct stats *s = &nic->mem->stats;
1550 __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
1551 (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames :
1552 &s->complete;
1553
1554 /* Device's stats reporting may take several microseconds to
1555 * complete, so we're always waiting for results of the
1556 * previous command. */
1557
1558 if (*complete == cpu_to_le32(cuc_dump_reset_complete)) {
1559 *complete = 0;
1560 nic->tx_frames = le32_to_cpu(s->tx_good_frames);
1561 nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
1562 ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions);
1563 ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions);
1564 ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs);
1565 ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns);
1566 ns->collisions += nic->tx_collisions;
1567 ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
1568 le32_to_cpu(s->tx_lost_crs);
1569 ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
1570 nic->rx_over_length_errors;
1571 ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
1572 ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
1573 ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
1574 ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
1575 ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
1576 ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
1577 le32_to_cpu(s->rx_alignment_errors) +
1578 le32_to_cpu(s->rx_short_frame_errors) +
1579 le32_to_cpu(s->rx_cdt_errors);
1580 nic->tx_deferred += le32_to_cpu(s->tx_deferred);
1581 nic->tx_single_collisions +=
1582 le32_to_cpu(s->tx_single_collisions);
1583 nic->tx_multiple_collisions +=
1584 le32_to_cpu(s->tx_multiple_collisions);
1585 if (nic->mac >= mac_82558_D101_A4) {
1586 nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause);
1587 nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause);
1588 nic->rx_fc_unsupported +=
1589 le32_to_cpu(s->fc_rcv_unsupported);
1590 if (nic->mac >= mac_82559_D101M) {
1591 nic->tx_tco_frames +=
1592 le16_to_cpu(s->xmt_tco_frames);
1593 nic->rx_tco_frames +=
1594 le16_to_cpu(s->rcv_tco_frames);
1595 }
1596 }
1597 }
1598
1599
1600 if (e100_exec_cmd(nic, cuc_dump_reset, 0))
1601 DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
1602 }
1603
1604 static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
1605 {
1606 /* Adjust inter-frame-spacing (IFS) between two transmits if
1607 * we're getting collisions on a half-duplex connection. */
1608
1609 if (duplex == DUPLEX_HALF) {
1610 u32 prev = nic->adaptive_ifs;
1611 u32 min_frames = (speed == SPEED_100) ? 1000 : 100;
1612
1613 if ((nic->tx_frames / 32 < nic->tx_collisions) &&
1614 (nic->tx_frames > min_frames)) {
1615 if (nic->adaptive_ifs < 60)
1616 nic->adaptive_ifs += 5;
1617 } else if (nic->tx_frames < min_frames) {
1618 if (nic->adaptive_ifs >= 5)
1619 nic->adaptive_ifs -= 5;
1620 }
1621 if (nic->adaptive_ifs != prev)
1622 e100_exec_cb(nic, NULL, e100_configure);
1623 }
1624 }
1625
1626 static void e100_watchdog(unsigned long data)
1627 {
1628 struct nic *nic = (struct nic *)data;
1629 struct ethtool_cmd cmd;
1630
1631 DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies);
1632
1633 /* mii library handles link maintenance tasks */
1634
1635 mii_ethtool_gset(&nic->mii, &cmd);
1636
1637 if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
1638 printk(KERN_INFO "e100: %s NIC Link is Up %s Mbps %s Duplex\n",
1639 nic->netdev->name,
1640 cmd.speed == SPEED_100 ? "100" : "10",
1641 cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
1642 } else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
1643 printk(KERN_INFO "e100: %s NIC Link is Down\n",
1644 nic->netdev->name);
1645 }
1646
1647 mii_check_link(&nic->mii);
1648
1649 /* Software generated interrupt to recover from (rare) Rx
1650 * allocation failure.
1651 * Unfortunately have to use a spinlock to not re-enable interrupts
1652 * accidentally, due to hardware that shares a register between the
1653 * interrupt mask bit and the SW Interrupt generation bit */
1654 spin_lock_irq(&nic->cmd_lock);
1655 iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
1656 e100_write_flush(nic);
1657 spin_unlock_irq(&nic->cmd_lock);
1658
1659 e100_update_stats(nic);
1660 e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex);
1661
1662 if (nic->mac <= mac_82557_D100_C)
1663 /* Issue a multicast command to workaround a 557 lock up */
1664 e100_set_multicast_list(nic->netdev);
1665
1666 if (nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
1667 /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
1668 nic->flags |= ich_10h_workaround;
1669 else
1670 nic->flags &= ~ich_10h_workaround;
1671
1672 mod_timer(&nic->watchdog,
1673 round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
1674 }
1675
1676 static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
1677 struct sk_buff *skb)
1678 {
1679 cb->command = nic->tx_command;
1680 /* interrupt every 16 packets regardless of delay */
1681 if ((nic->cbs_avail & ~15) == nic->cbs_avail)
1682 cb->command |= cpu_to_le16(cb_i);
1683 cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
1684 cb->u.tcb.tcb_byte_count = 0;
1685 cb->u.tcb.threshold = nic->tx_threshold;
1686 cb->u.tcb.tbd_count = 1;
1687 cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
1688 skb->data, skb->len, PCI_DMA_TODEVICE));
1689 /* check for mapping failure? */
1690 cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
1691 }
1692
1693 static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
1694 {
1695 struct nic *nic = netdev_priv(netdev);
1696 int err;
1697
1698 if (nic->flags & ich_10h_workaround) {
1699 /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
1700 Issue a NOP command followed by a 1us delay before
1701 issuing the Tx command. */
1702 if (e100_exec_cmd(nic, cuc_nop, 0))
1703 DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
1704 udelay(1);
1705 }
1706
1707 err = e100_exec_cb(nic, skb, e100_xmit_prepare);
1708
1709 switch (err) {
1710 case -ENOSPC:
1711 /* We queued the skb, but now we're out of space. */
1712 DPRINTK(TX_ERR, DEBUG, "No space for CB\n");
1713 netif_stop_queue(netdev);
1714 break;
1715 case -ENOMEM:
1716 /* This is a hard error - log it. */
1717 DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
1718 netif_stop_queue(netdev);
1719 return NETDEV_TX_BUSY;
1720 }
1721
1722 netdev->trans_start = jiffies;
1723 return 0;
1724 }
1725
1726 static int e100_tx_clean(struct nic *nic)
1727 {
1728 struct net_device *dev = nic->netdev;
1729 struct cb *cb;
1730 int tx_cleaned = 0;
1731
1732 spin_lock(&nic->cb_lock);
1733
1734 /* Clean CBs marked complete */
1735 for (cb = nic->cb_to_clean;
1736 cb->status & cpu_to_le16(cb_complete);
1737 cb = nic->cb_to_clean = cb->next) {
1738 DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
1739 (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
1740 cb->status);
1741
1742 if (likely(cb->skb != NULL)) {
1743 dev->stats.tx_packets++;
1744 dev->stats.tx_bytes += cb->skb->len;
1745
1746 pci_unmap_single(nic->pdev,
1747 le32_to_cpu(cb->u.tcb.tbd.buf_addr),
1748 le16_to_cpu(cb->u.tcb.tbd.size),
1749 PCI_DMA_TODEVICE);
1750 dev_kfree_skb_any(cb->skb);
1751 cb->skb = NULL;
1752 tx_cleaned = 1;
1753 }
1754 cb->status = 0;
1755 nic->cbs_avail++;
1756 }
1757
1758 spin_unlock(&nic->cb_lock);
1759
1760 /* Recover from running out of Tx resources in xmit_frame */
1761 if (unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
1762 netif_wake_queue(nic->netdev);
1763
1764 return tx_cleaned;
1765 }
1766
1767 static void e100_clean_cbs(struct nic *nic)
1768 {
1769 if (nic->cbs) {
1770 while (nic->cbs_avail != nic->params.cbs.count) {
1771 struct cb *cb = nic->cb_to_clean;
1772 if (cb->skb) {
1773 pci_unmap_single(nic->pdev,
1774 le32_to_cpu(cb->u.tcb.tbd.buf_addr),
1775 le16_to_cpu(cb->u.tcb.tbd.size),
1776 PCI_DMA_TODEVICE);
1777 dev_kfree_skb(cb->skb);
1778 }
1779 nic->cb_to_clean = nic->cb_to_clean->next;
1780 nic->cbs_avail++;
1781 }
1782 pci_free_consistent(nic->pdev,
1783 sizeof(struct cb) * nic->params.cbs.count,
1784 nic->cbs, nic->cbs_dma_addr);
1785 nic->cbs = NULL;
1786 nic->cbs_avail = 0;
1787 }
1788 nic->cuc_cmd = cuc_start;
1789 nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean =
1790 nic->cbs;
1791 }
1792
1793 static int e100_alloc_cbs(struct nic *nic)
1794 {
1795 struct cb *cb;
1796 unsigned int i, count = nic->params.cbs.count;
1797
1798 nic->cuc_cmd = cuc_start;
1799 nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
1800 nic->cbs_avail = 0;
1801
1802 nic->cbs = pci_alloc_consistent(nic->pdev,
1803 sizeof(struct cb) * count, &nic->cbs_dma_addr);
1804 if (!nic->cbs)
1805 return -ENOMEM;
1806
1807 for (cb = nic->cbs, i = 0; i < count; cb++, i++) {
1808 cb->next = (i + 1 < count) ? cb + 1 : nic->cbs;
1809 cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1;
1810
1811 cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb);
1812 cb->link = cpu_to_le32(nic->cbs_dma_addr +
1813 ((i+1) % count) * sizeof(struct cb));
1814 cb->skb = NULL;
1815 }
1816
1817 nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs;
1818 nic->cbs_avail = count;
1819
1820 return 0;
1821 }
1822
1823 static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
1824 {
1825 if (!nic->rxs) return;
1826 if (RU_SUSPENDED != nic->ru_running) return;
1827
1828 /* handle init time starts */
1829 if (!rx) rx = nic->rxs;
1830
1831 /* (Re)start RU if suspended or idle and RFA is non-NULL */
1832 if (rx->skb) {
1833 e100_exec_cmd(nic, ruc_start, rx->dma_addr);
1834 nic->ru_running = RU_RUNNING;
1835 }
1836 }
1837
1838 #define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
1839 static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
1840 {
1841 if (!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN)))
1842 return -ENOMEM;
1843
1844 /* Align, init, and map the RFD. */
1845 skb_reserve(rx->skb, NET_IP_ALIGN);
1846 skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
1847 rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
1848 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
1849
1850 if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
1851 dev_kfree_skb_any(rx->skb);
1852 rx->skb = NULL;
1853 rx->dma_addr = 0;
1854 return -ENOMEM;
1855 }
1856
1857 /* Link the RFD to end of RFA by linking previous RFD to
1858 * this one. We are safe to touch the previous RFD because
1859 * it is protected by the before last buffer's el bit being set */
1860 if (rx->prev->skb) {
1861 struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
1862 put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
1863 pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
1864 sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
1865 }
1866
1867 return 0;
1868 }
1869
1870 static int e100_rx_indicate(struct nic *nic, struct rx *rx,
1871 unsigned int *work_done, unsigned int work_to_do)
1872 {
1873 struct net_device *dev = nic->netdev;
1874 struct sk_buff *skb = rx->skb;
1875 struct rfd *rfd = (struct rfd *)skb->data;
1876 u16 rfd_status, actual_size;
1877
1878 if (unlikely(work_done && *work_done >= work_to_do))
1879 return -EAGAIN;
1880
1881 /* Need to sync before taking a peek at cb_complete bit */
1882 pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
1883 sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
1884 rfd_status = le16_to_cpu(rfd->status);
1885
1886 DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
1887
1888 /* If data isn't ready, nothing to indicate */
1889 if (unlikely(!(rfd_status & cb_complete))) {
1890 /* If the next buffer has the el bit, but we think the receiver
1891 * is still running, check to see if it really stopped while
1892 * we had interrupts off.
1893 * This allows for a fast restart without re-enabling
1894 * interrupts */
1895 if ((le16_to_cpu(rfd->command) & cb_el) &&
1896 (RU_RUNNING == nic->ru_running))
1897
1898 if (ioread8(&nic->csr->scb.status) & rus_no_res)
1899 nic->ru_running = RU_SUSPENDED;
1900 pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
1901 sizeof(struct rfd),
1902 PCI_DMA_FROMDEVICE);
1903 return -ENODATA;
1904 }
1905
1906 /* Get actual data size */
1907 actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
1908 if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
1909 actual_size = RFD_BUF_LEN - sizeof(struct rfd);
1910
1911 /* Get data */
1912 pci_unmap_single(nic->pdev, rx->dma_addr,
1913 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
1914
1915 /* If this buffer has the el bit, but we think the receiver
1916 * is still running, check to see if it really stopped while
1917 * we had interrupts off.
1918 * This allows for a fast restart without re-enabling interrupts.
1919 * This can happen when the RU sees the size change but also sees
1920 * the el bit set. */
1921 if ((le16_to_cpu(rfd->command) & cb_el) &&
1922 (RU_RUNNING == nic->ru_running)) {
1923
1924 if (ioread8(&nic->csr->scb.status) & rus_no_res)
1925 nic->ru_running = RU_SUSPENDED;
1926 }
1927
1928 /* Pull off the RFD and put the actual data (minus eth hdr) */
1929 skb_reserve(skb, sizeof(struct rfd));
1930 skb_put(skb, actual_size);
1931 skb->protocol = eth_type_trans(skb, nic->netdev);
1932
1933 if (unlikely(!(rfd_status & cb_ok))) {
1934 /* Don't indicate if hardware indicates errors */
1935 dev_kfree_skb_any(skb);
1936 } else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
1937 /* Don't indicate oversized frames */
1938 nic->rx_over_length_errors++;
1939 dev_kfree_skb_any(skb);
1940 } else {
1941 dev->stats.rx_packets++;
1942 dev->stats.rx_bytes += actual_size;
1943 netif_receive_skb(skb);
1944 if (work_done)
1945 (*work_done)++;
1946 }
1947
1948 rx->skb = NULL;
1949
1950 return 0;
1951 }
1952
1953 static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
1954 unsigned int work_to_do)
1955 {
1956 struct rx *rx;
1957 int restart_required = 0, err = 0;
1958 struct rx *old_before_last_rx, *new_before_last_rx;
1959 struct rfd *old_before_last_rfd, *new_before_last_rfd;
1960
1961 /* Indicate newly arrived packets */
1962 for (rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
1963 err = e100_rx_indicate(nic, rx, work_done, work_to_do);
1964 /* Hit quota or no more to clean */
1965 if (-EAGAIN == err || -ENODATA == err)
1966 break;
1967 }
1968
1969
1970 /* On EAGAIN, hit quota so have more work to do, restart once
1971 * cleanup is complete.
1972 * Else, are we already rnr? then pay attention!!! this ensures that
1973 * the state machine progression never allows a start with a
1974 * partially cleaned list, avoiding a race between hardware
1975 * and rx_to_clean when in NAPI mode */
1976 if (-EAGAIN != err && RU_SUSPENDED == nic->ru_running)
1977 restart_required = 1;
1978
1979 old_before_last_rx = nic->rx_to_use->prev->prev;
1980 old_before_last_rfd = (struct rfd *)old_before_last_rx->skb->data;
1981
1982 /* Alloc new skbs to refill list */
1983 for (rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
1984 if (unlikely(e100_rx_alloc_skb(nic, rx)))
1985 break; /* Better luck next time (see watchdog) */
1986 }
1987
1988 new_before_last_rx = nic->rx_to_use->prev->prev;
1989 if (new_before_last_rx != old_before_last_rx) {
1990 /* Set the el-bit on the buffer that is before the last buffer.
1991 * This lets us update the next pointer on the last buffer
1992 * without worrying about hardware touching it.
1993 * We set the size to 0 to prevent hardware from touching this
1994 * buffer.
1995 * When the hardware hits the before last buffer with el-bit
1996 * and size of 0, it will RNR interrupt, the RUS will go into
1997 * the No Resources state. It will not complete nor write to
1998 * this buffer. */
1999 new_before_last_rfd =
2000 (struct rfd *)new_before_last_rx->skb->data;
2001 new_before_last_rfd->size = 0;
2002 new_before_last_rfd->command |= cpu_to_le16(cb_el);
2003 pci_dma_sync_single_for_device(nic->pdev,
2004 new_before_last_rx->dma_addr, sizeof(struct rfd),
2005 PCI_DMA_BIDIRECTIONAL);
2006
2007 /* Now that we have a new stopping point, we can clear the old
2008 * stopping point. We must sync twice to get the proper
2009 * ordering on the hardware side of things. */
2010 old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
2011 pci_dma_sync_single_for_device(nic->pdev,
2012 old_before_last_rx->dma_addr, sizeof(struct rfd),
2013 PCI_DMA_BIDIRECTIONAL);
2014 old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
2015 pci_dma_sync_single_for_device(nic->pdev,
2016 old_before_last_rx->dma_addr, sizeof(struct rfd),
2017 PCI_DMA_BIDIRECTIONAL);
2018 }
2019
2020 if (restart_required) {
2021 // ack the rnr?
2022 iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
2023 e100_start_receiver(nic, nic->rx_to_clean);
2024 if (work_done)
2025 (*work_done)++;
2026 }
2027 }
2028
2029 static void e100_rx_clean_list(struct nic *nic)
2030 {
2031 struct rx *rx;
2032 unsigned int i, count = nic->params.rfds.count;
2033
2034 nic->ru_running = RU_UNINITIALIZED;
2035
2036 if (nic->rxs) {
2037 for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
2038 if (rx->skb) {
2039 pci_unmap_single(nic->pdev, rx->dma_addr,
2040 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
2041 dev_kfree_skb(rx->skb);
2042 }
2043 }
2044 kfree(nic->rxs);
2045 nic->rxs = NULL;
2046 }
2047
2048 nic->rx_to_use = nic->rx_to_clean = NULL;
2049 }
2050
2051 static int e100_rx_alloc_list(struct nic *nic)
2052 {
2053 struct rx *rx;
2054 unsigned int i, count = nic->params.rfds.count;
2055 struct rfd *before_last;
2056
2057 nic->rx_to_use = nic->rx_to_clean = NULL;
2058 nic->ru_running = RU_UNINITIALIZED;
2059
2060 if (!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
2061 return -ENOMEM;
2062
2063 for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
2064 rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
2065 rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1;
2066 if (e100_rx_alloc_skb(nic, rx)) {
2067 e100_rx_clean_list(nic);
2068 return -ENOMEM;
2069 }
2070 }
2071 /* Set the el-bit on the buffer that is before the last buffer.
2072 * This lets us update the next pointer on the last buffer without
2073 * worrying about hardware touching it.
2074 * We set the size to 0 to prevent hardware from touching this buffer.
2075 * When the hardware hits the before last buffer with el-bit and size
2076 * of 0, it will RNR interrupt, the RU will go into the No Resources
2077 * state. It will not complete nor write to this buffer. */
2078 rx = nic->rxs->prev->prev;
2079 before_last = (struct rfd *)rx->skb->data;
2080 before_last->command |= cpu_to_le16(cb_el);
2081 before_last->size = 0;
2082 pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
2083 sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
2084
2085 nic->rx_to_use = nic->rx_to_clean = nic->rxs;
2086 nic->ru_running = RU_SUSPENDED;
2087
2088 return 0;
2089 }
2090
2091 static irqreturn_t e100_intr(int irq, void *dev_id)
2092 {
2093 struct net_device *netdev = dev_id;
2094 struct nic *nic = netdev_priv(netdev);
2095 u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
2096
2097 DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
2098
2099 if (stat_ack == stat_ack_not_ours || /* Not our interrupt */
2100 stat_ack == stat_ack_not_present) /* Hardware is ejected */
2101 return IRQ_NONE;
2102
2103 /* Ack interrupt(s) */
2104 iowrite8(stat_ack, &nic->csr->scb.stat_ack);
2105
2106 /* We hit Receive No Resource (RNR); restart RU after cleaning */
2107 if (stat_ack & stat_ack_rnr)
2108 nic->ru_running = RU_SUSPENDED;
2109
2110 if (likely(napi_schedule_prep(&nic->napi))) {
2111 e100_disable_irq(nic);
2112 __napi_schedule(&nic->napi);
2113 }
2114
2115 return IRQ_HANDLED;
2116 }
2117
2118 static int e100_poll(struct napi_struct *napi, int budget)
2119 {
2120 struct nic *nic = container_of(napi, struct nic, napi);
2121 unsigned int work_done = 0;
2122
2123 e100_rx_clean(nic, &work_done, budget);
2124 e100_tx_clean(nic);
2125
2126 /* If budget not fully consumed, exit the polling mode */
2127 if (work_done < budget) {
2128 napi_complete(napi);
2129 e100_enable_irq(nic);
2130 }
2131
2132 return work_done;
2133 }
2134
2135 #ifdef CONFIG_NET_POLL_CONTROLLER
2136 static void e100_netpoll(struct net_device *netdev)
2137 {
2138 struct nic *nic = netdev_priv(netdev);
2139
2140 e100_disable_irq(nic);
2141 e100_intr(nic->pdev->irq, netdev);
2142 e100_tx_clean(nic);
2143 e100_enable_irq(nic);
2144 }
2145 #endif
2146
2147 static int e100_set_mac_address(struct net_device *netdev, void *p)
2148 {
2149 struct nic *nic = netdev_priv(netdev);
2150 struct sockaddr *addr = p;
2151
2152 if (!is_valid_ether_addr(addr->sa_data))
2153 return -EADDRNOTAVAIL;
2154
2155 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2156 e100_exec_cb(nic, NULL, e100_setup_iaaddr);
2157
2158 return 0;
2159 }
2160
2161 static int e100_change_mtu(struct net_device *netdev, int new_mtu)
2162 {
2163 if (new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
2164 return -EINVAL;
2165 netdev->mtu = new_mtu;
2166 return 0;
2167 }
2168
2169 static int e100_asf(struct nic *nic)
2170 {
2171 /* ASF can be enabled from eeprom */
2172 return((nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
2173 (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
2174 !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
2175 ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
2176 }
2177
2178 static int e100_up(struct nic *nic)
2179 {
2180 int err;
2181
2182 if ((err = e100_rx_alloc_list(nic)))
2183 return err;
2184 if ((err = e100_alloc_cbs(nic)))
2185 goto err_rx_clean_list;
2186 if ((err = e100_hw_init(nic)))
2187 goto err_clean_cbs;
2188 e100_set_multicast_list(nic->netdev);
2189 e100_start_receiver(nic, NULL);
2190 mod_timer(&nic->watchdog, jiffies);
2191 if ((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
2192 nic->netdev->name, nic->netdev)))
2193 goto err_no_irq;
2194 netif_wake_queue(nic->netdev);
2195 napi_enable(&nic->napi);
2196 /* enable ints _after_ enabling poll, preventing a race between
2197 * disable ints+schedule */
2198 e100_enable_irq(nic);
2199 return 0;
2200
2201 err_no_irq:
2202 del_timer_sync(&nic->watchdog);
2203 err_clean_cbs:
2204 e100_clean_cbs(nic);
2205 err_rx_clean_list:
2206 e100_rx_clean_list(nic);
2207 return err;
2208 }
2209
2210 static void e100_down(struct nic *nic)
2211 {
2212 /* wait here for poll to complete */
2213 napi_disable(&nic->napi);
2214 netif_stop_queue(nic->netdev);
2215 e100_hw_reset(nic);
2216 free_irq(nic->pdev->irq, nic->netdev);
2217 del_timer_sync(&nic->watchdog);
2218 netif_carrier_off(nic->netdev);
2219 e100_clean_cbs(nic);
2220 e100_rx_clean_list(nic);
2221 }
2222
2223 static void e100_tx_timeout(struct net_device *netdev)
2224 {
2225 struct nic *nic = netdev_priv(netdev);
2226
2227 /* Reset outside of interrupt context, to avoid request_irq
2228 * in interrupt context */
2229 schedule_work(&nic->tx_timeout_task);
2230 }
2231
2232 static void e100_tx_timeout_task(struct work_struct *work)
2233 {
2234 struct nic *nic = container_of(work, struct nic, tx_timeout_task);
2235 struct net_device *netdev = nic->netdev;
2236
2237 DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
2238 ioread8(&nic->csr->scb.status));
2239 e100_down(netdev_priv(netdev));
2240 e100_up(netdev_priv(netdev));
2241 }
2242
2243 static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
2244 {
2245 int err;
2246 struct sk_buff *skb;
2247
2248 /* Use driver resources to perform internal MAC or PHY
2249 * loopback test. A single packet is prepared and transmitted
2250 * in loopback mode, and the test passes if the received
2251 * packet compares byte-for-byte to the transmitted packet. */
2252
2253 if ((err = e100_rx_alloc_list(nic)))
2254 return err;
2255 if ((err = e100_alloc_cbs(nic)))
2256 goto err_clean_rx;
2257
2258 /* ICH PHY loopback is broken so do MAC loopback instead */
2259 if (nic->flags & ich && loopback_mode == lb_phy)
2260 loopback_mode = lb_mac;
2261
2262 nic->loopback = loopback_mode;
2263 if ((err = e100_hw_init(nic)))
2264 goto err_loopback_none;
2265
2266 if (loopback_mode == lb_phy)
2267 mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
2268 BMCR_LOOPBACK);
2269
2270 e100_start_receiver(nic, NULL);
2271
2272 if (!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
2273 err = -ENOMEM;
2274 goto err_loopback_none;
2275 }
2276 skb_put(skb, ETH_DATA_LEN);
2277 memset(skb->data, 0xFF, ETH_DATA_LEN);
2278 e100_xmit_frame(skb, nic->netdev);
2279
2280 msleep(10);
2281
2282 pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
2283 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
2284
2285 if (memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
2286 skb->data, ETH_DATA_LEN))
2287 err = -EAGAIN;
2288
2289 err_loopback_none:
2290 mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
2291 nic->loopback = lb_none;
2292 e100_clean_cbs(nic);
2293 e100_hw_reset(nic);
2294 err_clean_rx:
2295 e100_rx_clean_list(nic);
2296 return err;
2297 }
2298
2299 #define MII_LED_CONTROL 0x1B
2300 #define E100_82552_LED_OVERRIDE 0x19
2301 #define E100_82552_LED_ON 0x000F /* LEDTX and LED_RX both on */
2302 #define E100_82552_LED_OFF 0x000A /* LEDTX and LED_RX both off */
2303 static void e100_blink_led(unsigned long data)
2304 {
2305 struct nic *nic = (struct nic *)data;
2306 enum led_state {
2307 led_on = 0x01,
2308 led_off = 0x04,
2309 led_on_559 = 0x05,
2310 led_on_557 = 0x07,
2311 };
2312 u16 led_reg = MII_LED_CONTROL;
2313
2314 if (nic->phy == phy_82552_v) {
2315 led_reg = E100_82552_LED_OVERRIDE;
2316
2317 nic->leds = (nic->leds == E100_82552_LED_ON) ?
2318 E100_82552_LED_OFF : E100_82552_LED_ON;
2319 } else {
2320 nic->leds = (nic->leds & led_on) ? led_off :
2321 (nic->mac < mac_82559_D101M) ? led_on_557 :
2322 led_on_559;
2323 }
2324 mdio_write(nic->netdev, nic->mii.phy_id, led_reg, nic->leds);
2325 mod_timer(&nic->blink_timer, jiffies + HZ / 4);
2326 }
2327
2328 static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
2329 {
2330 struct nic *nic = netdev_priv(netdev);
2331 return mii_ethtool_gset(&nic->mii, cmd);
2332 }
2333
2334 static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
2335 {
2336 struct nic *nic = netdev_priv(netdev);
2337 int err;
2338
2339 mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET);
2340 err = mii_ethtool_sset(&nic->mii, cmd);
2341 e100_exec_cb(nic, NULL, e100_configure);
2342
2343 return err;
2344 }
2345
2346 static void e100_get_drvinfo(struct net_device *netdev,
2347 struct ethtool_drvinfo *info)
2348 {
2349 struct nic *nic = netdev_priv(netdev);
2350 strcpy(info->driver, DRV_NAME);
2351 strcpy(info->version, DRV_VERSION);
2352 strcpy(info->fw_version, "N/A");
2353 strcpy(info->bus_info, pci_name(nic->pdev));
2354 }
2355
2356 #define E100_PHY_REGS 0x1C
2357 static int e100_get_regs_len(struct net_device *netdev)
2358 {
2359 struct nic *nic = netdev_priv(netdev);
2360 return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
2361 }
2362
2363 static void e100_get_regs(struct net_device *netdev,
2364 struct ethtool_regs *regs, void *p)
2365 {
2366 struct nic *nic = netdev_priv(netdev);
2367 u32 *buff = p;
2368 int i;
2369
2370 regs->version = (1 << 24) | nic->pdev->revision;
2371 buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
2372 ioread8(&nic->csr->scb.cmd_lo) << 16 |
2373 ioread16(&nic->csr->scb.status);
2374 for (i = E100_PHY_REGS; i >= 0; i--)
2375 buff[1 + E100_PHY_REGS - i] =
2376 mdio_read(netdev, nic->mii.phy_id, i);
2377 memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
2378 e100_exec_cb(nic, NULL, e100_dump);
2379 msleep(10);
2380 memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf,
2381 sizeof(nic->mem->dump_buf));
2382 }
2383
2384 static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
2385 {
2386 struct nic *nic = netdev_priv(netdev);
2387 wol->supported = (nic->mac >= mac_82558_D101_A4) ? WAKE_MAGIC : 0;
2388 wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0;
2389 }
2390
2391 static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
2392 {
2393 struct nic *nic = netdev_priv(netdev);
2394
2395 if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) ||
2396 !device_can_wakeup(&nic->pdev->dev))
2397 return -EOPNOTSUPP;
2398
2399 if (wol->wolopts)
2400 nic->flags |= wol_magic;
2401 else
2402 nic->flags &= ~wol_magic;
2403
2404 device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts);
2405
2406 e100_exec_cb(nic, NULL, e100_configure);
2407
2408 return 0;
2409 }
2410
2411 static u32 e100_get_msglevel(struct net_device *netdev)
2412 {
2413 struct nic *nic = netdev_priv(netdev);
2414 return nic->msg_enable;
2415 }
2416
2417 static void e100_set_msglevel(struct net_device *netdev, u32 value)
2418 {
2419 struct nic *nic = netdev_priv(netdev);
2420 nic->msg_enable = value;
2421 }
2422
2423 static int e100_nway_reset(struct net_device *netdev)
2424 {
2425 struct nic *nic = netdev_priv(netdev);
2426 return mii_nway_restart(&nic->mii);
2427 }
2428
2429 static u32 e100_get_link(struct net_device *netdev)
2430 {
2431 struct nic *nic = netdev_priv(netdev);
2432 return mii_link_ok(&nic->mii);
2433 }
2434
2435 static int e100_get_eeprom_len(struct net_device *netdev)
2436 {
2437 struct nic *nic = netdev_priv(netdev);
2438 return nic->eeprom_wc << 1;
2439 }
2440
2441 #define E100_EEPROM_MAGIC 0x1234
2442 static int e100_get_eeprom(struct net_device *netdev,
2443 struct ethtool_eeprom *eeprom, u8 *bytes)
2444 {
2445 struct nic *nic = netdev_priv(netdev);
2446
2447 eeprom->magic = E100_EEPROM_MAGIC;
2448 memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len);
2449
2450 return 0;
2451 }
2452
2453 static int e100_set_eeprom(struct net_device *netdev,
2454 struct ethtool_eeprom *eeprom, u8 *bytes)
2455 {
2456 struct nic *nic = netdev_priv(netdev);
2457
2458 if (eeprom->magic != E100_EEPROM_MAGIC)
2459 return -EINVAL;
2460
2461 memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);
2462
2463 return e100_eeprom_save(nic, eeprom->offset >> 1,
2464 (eeprom->len >> 1) + 1);
2465 }
2466
2467 static void e100_get_ringparam(struct net_device *netdev,
2468 struct ethtool_ringparam *ring)
2469 {
2470 struct nic *nic = netdev_priv(netdev);
2471 struct param_range *rfds = &nic->params.rfds;
2472 struct param_range *cbs = &nic->params.cbs;
2473
2474 ring->rx_max_pending = rfds->max;
2475 ring->tx_max_pending = cbs->max;
2476 ring->rx_mini_max_pending = 0;
2477 ring->rx_jumbo_max_pending = 0;
2478 ring->rx_pending = rfds->count;
2479 ring->tx_pending = cbs->count;
2480 ring->rx_mini_pending = 0;
2481 ring->rx_jumbo_pending = 0;
2482 }
2483
2484 static int e100_set_ringparam(struct net_device *netdev,
2485 struct ethtool_ringparam *ring)
2486 {
2487 struct nic *nic = netdev_priv(netdev);
2488 struct param_range *rfds = &nic->params.rfds;
2489 struct param_range *cbs = &nic->params.cbs;
2490
2491 if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
2492 return -EINVAL;
2493
2494 if (netif_running(netdev))
2495 e100_down(nic);
2496 rfds->count = max(ring->rx_pending, rfds->min);
2497 rfds->count = min(rfds->count, rfds->max);
2498 cbs->count = max(ring->tx_pending, cbs->min);
2499 cbs->count = min(cbs->count, cbs->max);
2500 DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
2501 rfds->count, cbs->count);
2502 if (netif_running(netdev))
2503 e100_up(nic);
2504
2505 return 0;
2506 }
2507
2508 static const char e100_gstrings_test[][ETH_GSTRING_LEN] = {
2509 "Link test (on/offline)",
2510 "Eeprom test (on/offline)",
2511 "Self test (offline)",
2512 "Mac loopback (offline)",
2513 "Phy loopback (offline)",
2514 };
2515 #define E100_TEST_LEN ARRAY_SIZE(e100_gstrings_test)
2516
2517 static void e100_diag_test(struct net_device *netdev,
2518 struct ethtool_test *test, u64 *data)
2519 {
2520 struct ethtool_cmd cmd;
2521 struct nic *nic = netdev_priv(netdev);
2522 int i, err;
2523
2524 memset(data, 0, E100_TEST_LEN * sizeof(u64));
2525 data[0] = !mii_link_ok(&nic->mii);
2526 data[1] = e100_eeprom_load(nic);
2527 if (test->flags & ETH_TEST_FL_OFFLINE) {
2528
2529 /* save speed, duplex & autoneg settings */
2530 err = mii_ethtool_gset(&nic->mii, &cmd);
2531
2532 if (netif_running(netdev))
2533 e100_down(nic);
2534 data[2] = e100_self_test(nic);
2535 data[3] = e100_loopback_test(nic, lb_mac);
2536 data[4] = e100_loopback_test(nic, lb_phy);
2537
2538 /* restore speed, duplex & autoneg settings */
2539 err = mii_ethtool_sset(&nic->mii, &cmd);
2540
2541 if (netif_running(netdev))
2542 e100_up(nic);
2543 }
2544 for (i = 0; i < E100_TEST_LEN; i++)
2545 test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
2546
2547 msleep_interruptible(4 * 1000);
2548 }
2549
2550 static int e100_phys_id(struct net_device *netdev, u32 data)
2551 {
2552 struct nic *nic = netdev_priv(netdev);
2553 u16 led_reg = (nic->phy == phy_82552_v) ? E100_82552_LED_OVERRIDE :
2554 MII_LED_CONTROL;
2555
2556 if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
2557 data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
2558 mod_timer(&nic->blink_timer, jiffies);
2559 msleep_interruptible(data * 1000);
2560 del_timer_sync(&nic->blink_timer);
2561 mdio_write(netdev, nic->mii.phy_id, led_reg, 0);
2562
2563 return 0;
2564 }
2565
2566 static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = {
2567 "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
2568 "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
2569 "rx_length_errors", "rx_over_errors", "rx_crc_errors",
2570 "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
2571 "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
2572 "tx_heartbeat_errors", "tx_window_errors",
2573 /* device-specific stats */
2574 "tx_deferred", "tx_single_collisions", "tx_multi_collisions",
2575 "tx_flow_control_pause", "rx_flow_control_pause",
2576 "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
2577 };
2578 #define E100_NET_STATS_LEN 21
2579 #define E100_STATS_LEN ARRAY_SIZE(e100_gstrings_stats)
2580
2581 static int e100_get_sset_count(struct net_device *netdev, int sset)
2582 {
2583 switch (sset) {
2584 case ETH_SS_TEST:
2585 return E100_TEST_LEN;
2586 case ETH_SS_STATS:
2587 return E100_STATS_LEN;
2588 default:
2589 return -EOPNOTSUPP;
2590 }
2591 }
2592
2593 static void e100_get_ethtool_stats(struct net_device *netdev,
2594 struct ethtool_stats *stats, u64 *data)
2595 {
2596 struct nic *nic = netdev_priv(netdev);
2597 int i;
2598
2599 for (i = 0; i < E100_NET_STATS_LEN; i++)
2600 data[i] = ((unsigned long *)&netdev->stats)[i];
2601
2602 data[i++] = nic->tx_deferred;
2603 data[i++] = nic->tx_single_collisions;
2604 data[i++] = nic->tx_multiple_collisions;
2605 data[i++] = nic->tx_fc_pause;
2606 data[i++] = nic->rx_fc_pause;
2607 data[i++] = nic->rx_fc_unsupported;
2608 data[i++] = nic->tx_tco_frames;
2609 data[i++] = nic->rx_tco_frames;
2610 }
2611
2612 static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
2613 {
2614 switch (stringset) {
2615 case ETH_SS_TEST:
2616 memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test));
2617 break;
2618 case ETH_SS_STATS:
2619 memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats));
2620 break;
2621 }
2622 }
2623
2624 static const struct ethtool_ops e100_ethtool_ops = {
2625 .get_settings = e100_get_settings,
2626 .set_settings = e100_set_settings,
2627 .get_drvinfo = e100_get_drvinfo,
2628 .get_regs_len = e100_get_regs_len,
2629 .get_regs = e100_get_regs,
2630 .get_wol = e100_get_wol,
2631 .set_wol = e100_set_wol,
2632 .get_msglevel = e100_get_msglevel,
2633 .set_msglevel = e100_set_msglevel,
2634 .nway_reset = e100_nway_reset,
2635 .get_link = e100_get_link,
2636 .get_eeprom_len = e100_get_eeprom_len,
2637 .get_eeprom = e100_get_eeprom,
2638 .set_eeprom = e100_set_eeprom,
2639 .get_ringparam = e100_get_ringparam,
2640 .set_ringparam = e100_set_ringparam,
2641 .self_test = e100_diag_test,
2642 .get_strings = e100_get_strings,
2643 .phys_id = e100_phys_id,
2644 .get_ethtool_stats = e100_get_ethtool_stats,
2645 .get_sset_count = e100_get_sset_count,
2646 };
2647
2648 static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
2649 {
2650 struct nic *nic = netdev_priv(netdev);
2651
2652 return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL);
2653 }
2654
2655 static int e100_alloc(struct nic *nic)
2656 {
2657 nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem),
2658 &nic->dma_addr);
2659 return nic->mem ? 0 : -ENOMEM;
2660 }
2661
2662 static void e100_free(struct nic *nic)
2663 {
2664 if (nic->mem) {
2665 pci_free_consistent(nic->pdev, sizeof(struct mem),
2666 nic->mem, nic->dma_addr);
2667 nic->mem = NULL;
2668 }
2669 }
2670
2671 static int e100_open(struct net_device *netdev)
2672 {
2673 struct nic *nic = netdev_priv(netdev);
2674 int err = 0;
2675
2676 netif_carrier_off(netdev);
2677 if ((err = e100_up(nic)))
2678 DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n");
2679 return err;
2680 }
2681
2682 static int e100_close(struct net_device *netdev)
2683 {
2684 e100_down(netdev_priv(netdev));
2685 return 0;
2686 }
2687
2688 static const struct net_device_ops e100_netdev_ops = {
2689 .ndo_open = e100_open,
2690 .ndo_stop = e100_close,
2691 .ndo_start_xmit = e100_xmit_frame,
2692 .ndo_validate_addr = eth_validate_addr,
2693 .ndo_set_multicast_list = e100_set_multicast_list,
2694 .ndo_set_mac_address = e100_set_mac_address,
2695 .ndo_change_mtu = e100_change_mtu,
2696 .ndo_do_ioctl = e100_do_ioctl,
2697 .ndo_tx_timeout = e100_tx_timeout,
2698 #ifdef CONFIG_NET_POLL_CONTROLLER
2699 .ndo_poll_controller = e100_netpoll,
2700 #endif
2701 };
2702
2703 static int __devinit e100_probe(struct pci_dev *pdev,
2704 const struct pci_device_id *ent)
2705 {
2706 struct net_device *netdev;
2707 struct nic *nic;
2708 int err;
2709
2710 if (!(netdev = alloc_etherdev(sizeof(struct nic)))) {
2711 if (((1 << debug) - 1) & NETIF_MSG_PROBE)
2712 printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n");
2713 return -ENOMEM;
2714 }
2715
2716 netdev->netdev_ops = &e100_netdev_ops;
2717 SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
2718 netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
2719 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
2720
2721 nic = netdev_priv(netdev);
2722 netif_napi_add(netdev, &nic->napi, e100_poll, E100_NAPI_WEIGHT);
2723 nic->netdev = netdev;
2724 nic->pdev = pdev;
2725 nic->msg_enable = (1 << debug) - 1;
2726 nic->mdio_ctrl = mdio_ctrl_hw;
2727 pci_set_drvdata(pdev, netdev);
2728
2729 if ((err = pci_enable_device(pdev))) {
2730 DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n");
2731 goto err_out_free_dev;
2732 }
2733
2734 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
2735 DPRINTK(PROBE, ERR, "Cannot find proper PCI device "
2736 "base address, aborting.\n");
2737 err = -ENODEV;
2738 goto err_out_disable_pdev;
2739 }
2740
2741 if ((err = pci_request_regions(pdev, DRV_NAME))) {
2742 DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n");
2743 goto err_out_disable_pdev;
2744 }
2745
2746 if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
2747 DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
2748 goto err_out_free_res;
2749 }
2750
2751 SET_NETDEV_DEV(netdev, &pdev->dev);
2752
2753 if (use_io)
2754 DPRINTK(PROBE, INFO, "using i/o access mode\n");
2755
2756 nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
2757 if (!nic->csr) {
2758 DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
2759 err = -ENOMEM;
2760 goto err_out_free_res;
2761 }
2762
2763 if (ent->driver_data)
2764 nic->flags |= ich;
2765 else
2766 nic->flags &= ~ich;
2767
2768 e100_get_defaults(nic);
2769
2770 /* locks must be initialized before calling hw_reset */
2771 spin_lock_init(&nic->cb_lock);
2772 spin_lock_init(&nic->cmd_lock);
2773 spin_lock_init(&nic->mdio_lock);
2774
2775 /* Reset the device before pci_set_master() in case device is in some
2776 * funky state and has an interrupt pending - hint: we don't have the
2777 * interrupt handler registered yet. */
2778 e100_hw_reset(nic);
2779
2780 pci_set_master(pdev);
2781
2782 init_timer(&nic->watchdog);
2783 nic->watchdog.function = e100_watchdog;
2784 nic->watchdog.data = (unsigned long)nic;
2785 init_timer(&nic->blink_timer);
2786 nic->blink_timer.function = e100_blink_led;
2787 nic->blink_timer.data = (unsigned long)nic;
2788
2789 INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
2790
2791 if ((err = e100_alloc(nic))) {
2792 DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
2793 goto err_out_iounmap;
2794 }
2795
2796 if ((err = e100_eeprom_load(nic)))
2797 goto err_out_free;
2798
2799 e100_phy_init(nic);
2800
2801 memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
2802 memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
2803 if (!is_valid_ether_addr(netdev->perm_addr)) {
2804 if (!eeprom_bad_csum_allow) {
2805 DPRINTK(PROBE, ERR, "Invalid MAC address from "
2806 "EEPROM, aborting.\n");
2807 err = -EAGAIN;
2808 goto err_out_free;
2809 } else {
2810 DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, "
2811 "you MUST configure one.\n");
2812 }
2813 }
2814
2815 /* Wol magic packet can be enabled from eeprom */
2816 if ((nic->mac >= mac_82558_D101_A4) &&
2817 (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
2818 nic->flags |= wol_magic;
2819 device_set_wakeup_enable(&pdev->dev, true);
2820 }
2821
2822 /* ack any pending wake events, disable PME */
2823 pci_pme_active(pdev, false);
2824
2825 strcpy(netdev->name, "eth%d");
2826 if ((err = register_netdev(netdev))) {
2827 DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
2828 goto err_out_free;
2829 }
2830
2831 DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
2832 (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
2833 pdev->irq, netdev->dev_addr);
2834
2835 return 0;
2836
2837 err_out_free:
2838 e100_free(nic);
2839 err_out_iounmap:
2840 pci_iounmap(pdev, nic->csr);
2841 err_out_free_res:
2842 pci_release_regions(pdev);
2843 err_out_disable_pdev:
2844 pci_disable_device(pdev);
2845 err_out_free_dev:
2846 pci_set_drvdata(pdev, NULL);
2847 free_netdev(netdev);
2848 return err;
2849 }
2850
2851 static void __devexit e100_remove(struct pci_dev *pdev)
2852 {
2853 struct net_device *netdev = pci_get_drvdata(pdev);
2854
2855 if (netdev) {
2856 struct nic *nic = netdev_priv(netdev);
2857 unregister_netdev(netdev);
2858 e100_free(nic);
2859 pci_iounmap(pdev, nic->csr);
2860 free_netdev(netdev);
2861 pci_release_regions(pdev);
2862 pci_disable_device(pdev);
2863 pci_set_drvdata(pdev, NULL);
2864 }
2865 }
2866
2867 #define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */
2868 #define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */
2869 #define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */
2870 static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
2871 {
2872 struct net_device *netdev = pci_get_drvdata(pdev);
2873 struct nic *nic = netdev_priv(netdev);
2874
2875 if (netif_running(netdev))
2876 e100_down(nic);
2877 netif_device_detach(netdev);
2878
2879 pci_save_state(pdev);
2880
2881 if ((nic->flags & wol_magic) | e100_asf(nic)) {
2882 /* enable reverse auto-negotiation */
2883 if (nic->phy == phy_82552_v) {
2884 u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
2885 E100_82552_SMARTSPEED);
2886
2887 mdio_write(netdev, nic->mii.phy_id,
2888 E100_82552_SMARTSPEED, smartspeed |
2889 E100_82552_REV_ANEG | E100_82552_ANEG_NOW);
2890 }
2891 *enable_wake = true;
2892 } else {
2893 *enable_wake = false;
2894 }
2895
2896 pci_disable_device(pdev);
2897 }
2898
2899 static int __e100_power_off(struct pci_dev *pdev, bool wake)
2900 {
2901 if (wake)
2902 return pci_prepare_to_sleep(pdev);
2903
2904 pci_wake_from_d3(pdev, false);
2905 pci_set_power_state(pdev, PCI_D3hot);
2906
2907 return 0;
2908 }
2909
2910 #ifdef CONFIG_PM
2911 static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
2912 {
2913 bool wake;
2914 __e100_shutdown(pdev, &wake);
2915 return __e100_power_off(pdev, wake);
2916 }
2917
2918 static int e100_resume(struct pci_dev *pdev)
2919 {
2920 struct net_device *netdev = pci_get_drvdata(pdev);
2921 struct nic *nic = netdev_priv(netdev);
2922
2923 pci_set_power_state(pdev, PCI_D0);
2924 pci_restore_state(pdev);
2925 /* ack any pending wake events, disable PME */
2926 pci_enable_wake(pdev, 0, 0);
2927
2928 /* disable reverse auto-negotiation */
2929 if (nic->phy == phy_82552_v) {
2930 u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
2931 E100_82552_SMARTSPEED);
2932
2933 mdio_write(netdev, nic->mii.phy_id,
2934 E100_82552_SMARTSPEED,
2935 smartspeed & ~(E100_82552_REV_ANEG));
2936 }
2937
2938 netif_device_attach(netdev);
2939 if (netif_running(netdev))
2940 e100_up(nic);
2941
2942 return 0;
2943 }
2944 #endif /* CONFIG_PM */
2945
2946 static void e100_shutdown(struct pci_dev *pdev)
2947 {
2948 bool wake;
2949 __e100_shutdown(pdev, &wake);
2950 if (system_state == SYSTEM_POWER_OFF)
2951 __e100_power_off(pdev, wake);
2952 }
2953
2954 /* ------------------ PCI Error Recovery infrastructure -------------- */
2955 /**
2956 * e100_io_error_detected - called when PCI error is detected.
2957 * @pdev: Pointer to PCI device
2958 * @state: The current pci connection state
2959 */
2960 static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
2961 {
2962 struct net_device *netdev = pci_get_drvdata(pdev);
2963 struct nic *nic = netdev_priv(netdev);
2964
2965 netif_device_detach(netdev);
2966
2967 if (state == pci_channel_io_perm_failure)
2968 return PCI_ERS_RESULT_DISCONNECT;
2969
2970 if (netif_running(netdev))
2971 e100_down(nic);
2972 pci_disable_device(pdev);
2973
2974 /* Request a slot reset. */
2975 return PCI_ERS_RESULT_NEED_RESET;
2976 }
2977
2978 /**
2979 * e100_io_slot_reset - called after the pci bus has been reset.
2980 * @pdev: Pointer to PCI device
2981 *
2982 * Restart the card from scratch.
2983 */
2984 static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
2985 {
2986 struct net_device *netdev = pci_get_drvdata(pdev);
2987 struct nic *nic = netdev_priv(netdev);
2988
2989 if (pci_enable_device(pdev)) {
2990 printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n");
2991 return PCI_ERS_RESULT_DISCONNECT;
2992 }
2993 pci_set_master(pdev);
2994
2995 /* Only one device per card can do a reset */
2996 if (0 != PCI_FUNC(pdev->devfn))
2997 return PCI_ERS_RESULT_RECOVERED;
2998 e100_hw_reset(nic);
2999 e100_phy_init(nic);
3000
3001 return PCI_ERS_RESULT_RECOVERED;
3002 }
3003
3004 /**
3005 * e100_io_resume - resume normal operations
3006 * @pdev: Pointer to PCI device
3007 *
3008 * Resume normal operations after an error recovery
3009 * sequence has been completed.
3010 */
3011 static void e100_io_resume(struct pci_dev *pdev)
3012 {
3013 struct net_device *netdev = pci_get_drvdata(pdev);
3014 struct nic *nic = netdev_priv(netdev);
3015
3016 /* ack any pending wake events, disable PME */
3017 pci_enable_wake(pdev, 0, 0);
3018
3019 netif_device_attach(netdev);
3020 if (netif_running(netdev)) {
3021 e100_open(netdev);
3022 mod_timer(&nic->watchdog, jiffies);
3023 }
3024 }
3025
3026 static struct pci_error_handlers e100_err_handler = {
3027 .error_detected = e100_io_error_detected,
3028 .slot_reset = e100_io_slot_reset,
3029 .resume = e100_io_resume,
3030 };
3031
3032 static struct pci_driver e100_driver = {
3033 .name = DRV_NAME,
3034 .id_table = e100_id_table,
3035 .probe = e100_probe,
3036 .remove = __devexit_p(e100_remove),
3037 #ifdef CONFIG_PM
3038 /* Power Management hooks */
3039 .suspend = e100_suspend,
3040 .resume = e100_resume,
3041 #endif
3042 .shutdown = e100_shutdown,
3043 .err_handler = &e100_err_handler,
3044 };
3045
3046 static int __init e100_init_module(void)
3047 {
3048 if (((1 << debug) - 1) & NETIF_MSG_DRV) {
3049 printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
3050 printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT);
3051 }
3052 return pci_register_driver(&e100_driver);
3053 }
3054
3055 static void __exit e100_cleanup_module(void)
3056 {
3057 pci_unregister_driver(&e100_driver);
3058 }
3059
3060 module_init(e100_init_module);
3061 module_exit(e100_cleanup_module);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree