ARM: realview: use Kconfig choice for debug UART selection
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-at91 / at91rm9200.c
blobf73302dbc6a547272624bee244224aa2fa06e520
1 /*
2 * arch/arm/mach-at91/at91rm9200.c
4 * Copyright (C) 2005 SAN People
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
13 #include <linux/module.h>
15 #include <asm/irq.h>
16 #include <asm/mach/arch.h>
17 #include <asm/mach/map.h>
18 #include <mach/at91rm9200.h>
19 #include <mach/at91_pmc.h>
20 #include <mach/at91_st.h>
21 #include <mach/cpu.h>
23 #include "soc.h"
24 #include "generic.h"
25 #include "clock.h"
27 static struct map_desc at91rm9200_io_desc[] __initdata = {
29 .virtual = AT91_VA_BASE_EMAC,
30 .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
31 .length = SZ_16K,
32 .type = MT_DEVICE,
36 /* --------------------------------------------------------------------
37 * Clocks
38 * -------------------------------------------------------------------- */
41 * The peripheral clocks.
43 static struct clk udc_clk = {
44 .name = "udc_clk",
45 .pmc_mask = 1 << AT91RM9200_ID_UDP,
46 .type = CLK_TYPE_PERIPHERAL,
48 static struct clk ohci_clk = {
49 .name = "ohci_clk",
50 .pmc_mask = 1 << AT91RM9200_ID_UHP,
51 .type = CLK_TYPE_PERIPHERAL,
53 static struct clk ether_clk = {
54 .name = "ether_clk",
55 .pmc_mask = 1 << AT91RM9200_ID_EMAC,
56 .type = CLK_TYPE_PERIPHERAL,
58 static struct clk mmc_clk = {
59 .name = "mci_clk",
60 .pmc_mask = 1 << AT91RM9200_ID_MCI,
61 .type = CLK_TYPE_PERIPHERAL,
63 static struct clk twi_clk = {
64 .name = "twi_clk",
65 .pmc_mask = 1 << AT91RM9200_ID_TWI,
66 .type = CLK_TYPE_PERIPHERAL,
68 static struct clk usart0_clk = {
69 .name = "usart0_clk",
70 .pmc_mask = 1 << AT91RM9200_ID_US0,
71 .type = CLK_TYPE_PERIPHERAL,
73 static struct clk usart1_clk = {
74 .name = "usart1_clk",
75 .pmc_mask = 1 << AT91RM9200_ID_US1,
76 .type = CLK_TYPE_PERIPHERAL,
78 static struct clk usart2_clk = {
79 .name = "usart2_clk",
80 .pmc_mask = 1 << AT91RM9200_ID_US2,
81 .type = CLK_TYPE_PERIPHERAL,
83 static struct clk usart3_clk = {
84 .name = "usart3_clk",
85 .pmc_mask = 1 << AT91RM9200_ID_US3,
86 .type = CLK_TYPE_PERIPHERAL,
88 static struct clk spi_clk = {
89 .name = "spi_clk",
90 .pmc_mask = 1 << AT91RM9200_ID_SPI,
91 .type = CLK_TYPE_PERIPHERAL,
93 static struct clk pioA_clk = {
94 .name = "pioA_clk",
95 .pmc_mask = 1 << AT91RM9200_ID_PIOA,
96 .type = CLK_TYPE_PERIPHERAL,
98 static struct clk pioB_clk = {
99 .name = "pioB_clk",
100 .pmc_mask = 1 << AT91RM9200_ID_PIOB,
101 .type = CLK_TYPE_PERIPHERAL,
103 static struct clk pioC_clk = {
104 .name = "pioC_clk",
105 .pmc_mask = 1 << AT91RM9200_ID_PIOC,
106 .type = CLK_TYPE_PERIPHERAL,
108 static struct clk pioD_clk = {
109 .name = "pioD_clk",
110 .pmc_mask = 1 << AT91RM9200_ID_PIOD,
111 .type = CLK_TYPE_PERIPHERAL,
113 static struct clk ssc0_clk = {
114 .name = "ssc0_clk",
115 .pmc_mask = 1 << AT91RM9200_ID_SSC0,
116 .type = CLK_TYPE_PERIPHERAL,
118 static struct clk ssc1_clk = {
119 .name = "ssc1_clk",
120 .pmc_mask = 1 << AT91RM9200_ID_SSC1,
121 .type = CLK_TYPE_PERIPHERAL,
123 static struct clk ssc2_clk = {
124 .name = "ssc2_clk",
125 .pmc_mask = 1 << AT91RM9200_ID_SSC2,
126 .type = CLK_TYPE_PERIPHERAL,
128 static struct clk tc0_clk = {
129 .name = "tc0_clk",
130 .pmc_mask = 1 << AT91RM9200_ID_TC0,
131 .type = CLK_TYPE_PERIPHERAL,
133 static struct clk tc1_clk = {
134 .name = "tc1_clk",
135 .pmc_mask = 1 << AT91RM9200_ID_TC1,
136 .type = CLK_TYPE_PERIPHERAL,
138 static struct clk tc2_clk = {
139 .name = "tc2_clk",
140 .pmc_mask = 1 << AT91RM9200_ID_TC2,
141 .type = CLK_TYPE_PERIPHERAL,
143 static struct clk tc3_clk = {
144 .name = "tc3_clk",
145 .pmc_mask = 1 << AT91RM9200_ID_TC3,
146 .type = CLK_TYPE_PERIPHERAL,
148 static struct clk tc4_clk = {
149 .name = "tc4_clk",
150 .pmc_mask = 1 << AT91RM9200_ID_TC4,
151 .type = CLK_TYPE_PERIPHERAL,
153 static struct clk tc5_clk = {
154 .name = "tc5_clk",
155 .pmc_mask = 1 << AT91RM9200_ID_TC5,
156 .type = CLK_TYPE_PERIPHERAL,
159 static struct clk *periph_clocks[] __initdata = {
160 &pioA_clk,
161 &pioB_clk,
162 &pioC_clk,
163 &pioD_clk,
164 &usart0_clk,
165 &usart1_clk,
166 &usart2_clk,
167 &usart3_clk,
168 &mmc_clk,
169 &udc_clk,
170 &twi_clk,
171 &spi_clk,
172 &ssc0_clk,
173 &ssc1_clk,
174 &ssc2_clk,
175 &tc0_clk,
176 &tc1_clk,
177 &tc2_clk,
178 &tc3_clk,
179 &tc4_clk,
180 &tc5_clk,
181 &ohci_clk,
182 &ether_clk,
183 // irq0 .. irq6
186 static struct clk_lookup periph_clocks_lookups[] = {
187 CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
188 CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
189 CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
190 CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
191 CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
192 CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
193 CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
194 CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
195 CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
198 static struct clk_lookup usart_clocks_lookups[] = {
199 CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
200 CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
201 CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
202 CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
203 CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
207 * The four programmable clocks.
208 * You must configure pin multiplexing to bring these signals out.
210 static struct clk pck0 = {
211 .name = "pck0",
212 .pmc_mask = AT91_PMC_PCK0,
213 .type = CLK_TYPE_PROGRAMMABLE,
214 .id = 0,
216 static struct clk pck1 = {
217 .name = "pck1",
218 .pmc_mask = AT91_PMC_PCK1,
219 .type = CLK_TYPE_PROGRAMMABLE,
220 .id = 1,
222 static struct clk pck2 = {
223 .name = "pck2",
224 .pmc_mask = AT91_PMC_PCK2,
225 .type = CLK_TYPE_PROGRAMMABLE,
226 .id = 2,
228 static struct clk pck3 = {
229 .name = "pck3",
230 .pmc_mask = AT91_PMC_PCK3,
231 .type = CLK_TYPE_PROGRAMMABLE,
232 .id = 3,
235 static void __init at91rm9200_register_clocks(void)
237 int i;
239 for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
240 clk_register(periph_clocks[i]);
242 clkdev_add_table(periph_clocks_lookups,
243 ARRAY_SIZE(periph_clocks_lookups));
244 clkdev_add_table(usart_clocks_lookups,
245 ARRAY_SIZE(usart_clocks_lookups));
247 clk_register(&pck0);
248 clk_register(&pck1);
249 clk_register(&pck2);
250 clk_register(&pck3);
253 static struct clk_lookup console_clock_lookup;
255 void __init at91rm9200_set_console_clock(int id)
257 if (id >= ARRAY_SIZE(usart_clocks_lookups))
258 return;
260 console_clock_lookup.con_id = "usart";
261 console_clock_lookup.clk = usart_clocks_lookups[id].clk;
262 clkdev_add(&console_clock_lookup);
265 /* --------------------------------------------------------------------
266 * GPIO
267 * -------------------------------------------------------------------- */
269 static struct at91_gpio_bank at91rm9200_gpio[] = {
271 .id = AT91RM9200_ID_PIOA,
272 .offset = AT91_PIOA,
273 .clock = &pioA_clk,
274 }, {
275 .id = AT91RM9200_ID_PIOB,
276 .offset = AT91_PIOB,
277 .clock = &pioB_clk,
278 }, {
279 .id = AT91RM9200_ID_PIOC,
280 .offset = AT91_PIOC,
281 .clock = &pioC_clk,
282 }, {
283 .id = AT91RM9200_ID_PIOD,
284 .offset = AT91_PIOD,
285 .clock = &pioD_clk,
289 static void at91rm9200_reset(void)
292 * Perform a hardware reset with the use of the Watchdog timer.
294 at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
295 at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
298 /* --------------------------------------------------------------------
299 * AT91RM9200 processor initialization
300 * -------------------------------------------------------------------- */
301 static void __init at91rm9200_map_io(void)
303 /* Map peripherals */
304 at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE);
305 iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
308 static void __init at91rm9200_initialize(void)
310 at91_arch_reset = at91rm9200_reset;
311 at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
312 | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
313 | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
314 | (1 << AT91RM9200_ID_IRQ6);
316 /* Initialize GPIO subsystem */
317 at91_gpio_init(at91rm9200_gpio,
318 cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
322 /* --------------------------------------------------------------------
323 * Interrupt initialization
324 * -------------------------------------------------------------------- */
327 * The default interrupt priority levels (0 = lowest, 7 = highest).
329 static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
330 7, /* Advanced Interrupt Controller (FIQ) */
331 7, /* System Peripherals */
332 1, /* Parallel IO Controller A */
333 1, /* Parallel IO Controller B */
334 1, /* Parallel IO Controller C */
335 1, /* Parallel IO Controller D */
336 5, /* USART 0 */
337 5, /* USART 1 */
338 5, /* USART 2 */
339 5, /* USART 3 */
340 0, /* Multimedia Card Interface */
341 2, /* USB Device Port */
342 6, /* Two-Wire Interface */
343 5, /* Serial Peripheral Interface */
344 4, /* Serial Synchronous Controller 0 */
345 4, /* Serial Synchronous Controller 1 */
346 4, /* Serial Synchronous Controller 2 */
347 0, /* Timer Counter 0 */
348 0, /* Timer Counter 1 */
349 0, /* Timer Counter 2 */
350 0, /* Timer Counter 3 */
351 0, /* Timer Counter 4 */
352 0, /* Timer Counter 5 */
353 2, /* USB Host port */
354 3, /* Ethernet MAC */
355 0, /* Advanced Interrupt Controller (IRQ0) */
356 0, /* Advanced Interrupt Controller (IRQ1) */
357 0, /* Advanced Interrupt Controller (IRQ2) */
358 0, /* Advanced Interrupt Controller (IRQ3) */
359 0, /* Advanced Interrupt Controller (IRQ4) */
360 0, /* Advanced Interrupt Controller (IRQ5) */
361 0 /* Advanced Interrupt Controller (IRQ6) */
364 struct at91_init_soc __initdata at91rm9200_soc = {
365 .map_io = at91rm9200_map_io,
366 .default_irq_priority = at91rm9200_default_irq_priority,
367 .register_clocks = at91rm9200_register_clocks,
368 .init = at91rm9200_initialize,