nfsd: link returns nfserr_delay when breaking lease
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-ep93xx / simone.c
blobd96dc1c5da20a26c0f3b4017d2411d16ceacadd7
1 /*
2 * arch/arm/mach-ep93xx/simone.c
3 * Simplemachines Sim.One support.
5 * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
7 * Based on the 2.6.24.7 support:
8 * Copyright (C) 2009 Simplemachines
9 * MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/platform_device.h>
21 #include <linux/gpio.h>
22 #include <linux/i2c.h>
23 #include <linux/i2c-gpio.h>
25 #include <mach/hardware.h>
26 #include <mach/fb.h>
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
31 static struct ep93xx_eth_data __initdata simone_eth_data = {
32 .phy_id = 1,
35 static struct ep93xxfb_mach_info __initdata simone_fb_info = {
36 .num_modes = EP93XXFB_USE_MODEDB,
37 .bpp = 16,
38 .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
41 static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
42 .sda_pin = EP93XX_GPIO_LINE_EEDAT,
43 .sda_is_open_drain = 0,
44 .scl_pin = EP93XX_GPIO_LINE_EECLK,
45 .scl_is_open_drain = 0,
46 .udelay = 0,
47 .timeout = 0,
50 static struct i2c_board_info __initdata simone_i2c_board_info[] = {
52 I2C_BOARD_INFO("ds1337", 0x68),
56 static void __init simone_init_machine(void)
58 ep93xx_init_devices();
59 ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
60 ep93xx_register_eth(&simone_eth_data, 1);
61 ep93xx_register_fb(&simone_fb_info);
62 ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
63 ARRAY_SIZE(simone_i2c_board_info));
64 ep93xx_register_ac97();
67 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
68 /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
69 .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
70 .map_io = ep93xx_map_io,
71 .init_irq = ep93xx_init_irq,
72 .timer = &ep93xx_timer,
73 .init_machine = simone_init_machine,
74 MACHINE_END