ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / sh / boards / board-urquell.c
blob24e3316c5c179067839ca956da29f685b87246c2
1 /*
2 * Renesas Technology Corp. SH7786 Urquell Support.
4 * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
5 * Copyright (C) 2009, 2010 Paul Mundt
7 * Based on board-sh7785lcr.c
8 * Copyright (C) 2008 Yoshihiro Shimoda
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file "COPYING" in the main directory of this archive
12 * for more details.
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/fb.h>
17 #include <linux/smc91x.h>
18 #include <linux/mtd/physmap.h>
19 #include <linux/delay.h>
20 #include <linux/gpio.h>
21 #include <linux/irq.h>
22 #include <linux/clk.h>
23 #include <mach/urquell.h>
24 #include <cpu/sh7786.h>
25 #include <asm/heartbeat.h>
26 #include <asm/sizes.h>
27 #include <asm/smp-ops.h>
30 * bit 1234 5678
31 *----------------------------
32 * SW1 0101 0010 -> Pck 33MHz version
33 * (1101 0010) Pck 66MHz version
34 * SW2 0x1x xxxx -> little endian
35 * 29bit mode
36 * SW47 0001 1000 -> CS0 : on-board flash
37 * CS1 : SRAM, registers, LAN, PCMCIA
38 * 38400 bps for SCIF1
40 * Address
41 * 0x00000000 - 0x04000000 (CS0) Nor Flash
42 * 0x04000000 - 0x04200000 (CS1) SRAM
43 * 0x05000000 - 0x05800000 (CS1) on board register
44 * 0x05800000 - 0x06000000 (CS1) LAN91C111
45 * 0x06000000 - 0x06400000 (CS1) PCMCIA
46 * 0x08000000 - 0x10000000 (CS2-CS3) DDR3
47 * 0x10000000 - 0x14000000 (CS4) PCIe
48 * 0x14000000 - 0x14800000 (CS5) Core0 LRAM/URAM
49 * 0x14800000 - 0x15000000 (CS5) Core1 LRAM/URAM
50 * 0x18000000 - 0x1C000000 (CS6) ATA/NAND-Flash
51 * 0x1C000000 - (CS7) SH7786 Control register
54 /* HeartBeat */
55 static struct resource heartbeat_resource = {
56 .start = BOARDREG(SLEDR),
57 .end = BOARDREG(SLEDR),
58 .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
61 static struct platform_device heartbeat_device = {
62 .name = "heartbeat",
63 .id = -1,
64 .num_resources = 1,
65 .resource = &heartbeat_resource,
68 /* LAN91C111 */
69 static struct smc91x_platdata smc91x_info = {
70 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
73 static struct resource smc91x_eth_resources[] = {
74 [0] = {
75 .name = "SMC91C111" ,
76 .start = 0x05800300,
77 .end = 0x0580030f,
78 .flags = IORESOURCE_MEM,
80 [1] = {
81 .start = 11,
82 .flags = IORESOURCE_IRQ,
86 static struct platform_device smc91x_eth_device = {
87 .name = "smc91x",
88 .num_resources = ARRAY_SIZE(smc91x_eth_resources),
89 .resource = smc91x_eth_resources,
90 .dev = {
91 .platform_data = &smc91x_info,
95 /* Nor Flash */
96 static struct mtd_partition nor_flash_partitions[] = {
98 .name = "loader",
99 .offset = 0x00000000,
100 .size = SZ_512K,
101 .mask_flags = MTD_WRITEABLE, /* Read-only */
104 .name = "bootenv",
105 .offset = MTDPART_OFS_APPEND,
106 .size = SZ_512K,
107 .mask_flags = MTD_WRITEABLE, /* Read-only */
110 .name = "kernel",
111 .offset = MTDPART_OFS_APPEND,
112 .size = SZ_4M,
115 .name = "data",
116 .offset = MTDPART_OFS_APPEND,
117 .size = MTDPART_SIZ_FULL,
121 static struct physmap_flash_data nor_flash_data = {
122 .width = 2,
123 .parts = nor_flash_partitions,
124 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
127 static struct resource nor_flash_resources[] = {
128 [0] = {
129 .start = NOR_FLASH_ADDR,
130 .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
131 .flags = IORESOURCE_MEM,
135 static struct platform_device nor_flash_device = {
136 .name = "physmap-flash",
137 .dev = {
138 .platform_data = &nor_flash_data,
140 .num_resources = ARRAY_SIZE(nor_flash_resources),
141 .resource = nor_flash_resources,
144 static struct platform_device *urquell_devices[] __initdata = {
145 &heartbeat_device,
146 &smc91x_eth_device,
147 &nor_flash_device,
150 static int __init urquell_devices_setup(void)
152 /* USB */
153 gpio_request(GPIO_FN_USB_OVC0, NULL);
154 gpio_request(GPIO_FN_USB_PENC0, NULL);
156 /* enable LAN */
157 __raw_writew(__raw_readw(UBOARDREG(IRL2MSKR)) & ~0x00000001,
158 UBOARDREG(IRL2MSKR));
160 return platform_add_devices(urquell_devices,
161 ARRAY_SIZE(urquell_devices));
163 device_initcall(urquell_devices_setup);
165 static void urquell_power_off(void)
167 __raw_writew(0xa5a5, UBOARDREG(SRSTR));
170 static void __init urquell_init_irq(void)
172 plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
175 static int urquell_mode_pins(void)
177 return __raw_readw(UBOARDREG(MDSWMR));
180 static int urquell_clk_init(void)
182 struct clk *clk;
183 int ret;
186 * Only handle the EXTAL case, anyone interfacing a crystal
187 * resonator will need to provide their own input clock.
189 if (test_mode_pin(MODE_PIN9))
190 return -EINVAL;
192 clk = clk_get(NULL, "extal");
193 if (IS_ERR(clk))
194 return PTR_ERR(clk);
195 ret = clk_set_rate(clk, 33333333);
196 clk_put(clk);
198 return ret;
201 /* Initialize the board */
202 static void __init urquell_setup(char **cmdline_p)
204 printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
206 pm_power_off = urquell_power_off;
208 register_smp_ops(&shx3_smp_ops);
212 * The Machine Vector
214 static struct sh_machine_vector mv_urquell __initmv = {
215 .mv_name = "Urquell",
216 .mv_setup = urquell_setup,
217 .mv_init_irq = urquell_init_irq,
218 .mv_mode_pins = urquell_mode_pins,
219 .mv_clk_init = urquell_clk_init,