hwmon: (pmbus) Auto-detect temp2 and temp3 registers/attributes
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / ll_temac_mdio.c
blob8cf9d4f56bb2223893dd912e1d475a48fc30f683
1 /*
2 * MDIO bus driver for the Xilinx TEMAC device
4 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
5 */
7 #include <linux/io.h>
8 #include <linux/netdevice.h>
9 #include <linux/mutex.h>
10 #include <linux/phy.h>
11 #include <linux/of.h>
12 #include <linux/of_device.h>
13 #include <linux/of_address.h>
14 #include <linux/slab.h>
15 #include <linux/of_mdio.h>
17 #include "ll_temac.h"
19 /* ---------------------------------------------------------------------
20 * MDIO Bus functions
22 static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
24 struct temac_local *lp = bus->priv;
25 u32 rc;
27 /* Write the PHY address to the MIIM Access Initiator register.
28 * When the transfer completes, the PHY register value will appear
29 * in the LSW0 register */
30 mutex_lock(&lp->indirect_mutex);
31 temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
32 rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
33 mutex_unlock(&lp->indirect_mutex);
35 dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
36 phy_id, reg, rc);
38 return rc;
41 static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
43 struct temac_local *lp = bus->priv;
45 dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
46 phy_id, reg, val);
48 /* First write the desired value into the write data register
49 * and then write the address into the access initiator register
51 mutex_lock(&lp->indirect_mutex);
52 temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
53 temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
54 mutex_unlock(&lp->indirect_mutex);
56 return 0;
59 int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
61 struct mii_bus *bus;
62 const u32 *bus_hz;
63 int clk_div;
64 int rc, size;
65 struct resource res;
67 /* Calculate a reasonable divisor for the clock rate */
68 clk_div = 0x3f; /* worst-case default setting */
69 bus_hz = of_get_property(np, "clock-frequency", &size);
70 if (bus_hz && size >= sizeof(*bus_hz)) {
71 clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
72 if (clk_div < 1)
73 clk_div = 1;
74 if (clk_div > 0x3f)
75 clk_div = 0x3f;
78 /* Enable the MDIO bus by asserting the enable bit and writing
79 * in the clock config */
80 mutex_lock(&lp->indirect_mutex);
81 temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
82 mutex_unlock(&lp->indirect_mutex);
84 bus = mdiobus_alloc();
85 if (!bus)
86 return -ENOMEM;
88 of_address_to_resource(np, 0, &res);
89 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
90 (unsigned long long)res.start);
91 bus->priv = lp;
92 bus->name = "Xilinx TEMAC MDIO";
93 bus->read = temac_mdio_read;
94 bus->write = temac_mdio_write;
95 bus->parent = lp->dev;
96 bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
98 lp->mii_bus = bus;
100 rc = of_mdiobus_register(bus, np);
101 if (rc)
102 goto err_register;
104 mutex_lock(&lp->indirect_mutex);
105 dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n",
106 temac_indirect_in32(lp, XTE_MC_OFFSET));
107 mutex_unlock(&lp->indirect_mutex);
108 return 0;
110 err_register:
111 mdiobus_free(bus);
112 return rc;
115 void temac_mdio_teardown(struct temac_local *lp)
117 mdiobus_unregister(lp->mii_bus);
118 kfree(lp->mii_bus->irq);
119 mdiobus_free(lp->mii_bus);
120 lp->mii_bus = NULL;