2 * osd_sense.h - OSD Related sense handling definitions.
4 * Copyright (C) 2008 Panasas Inc. All rights reserved.
7 * Boaz Harrosh <bharrosh@panasas.com>
8 * Benny Halevy <bhalevy@panasas.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2
13 * This file contains types and constants that are defined by the protocol
14 * Note: All names and symbols are taken from the OSD standard's text.
16 #ifndef __OSD_SENSE_H__
17 #define __OSD_SENSE_H__
19 #include <scsi/osd_protocol.h>
21 /* SPC3r23 4.5.6 Sense key and sense code definitions table 27 */
22 enum scsi_sense_keys
{
23 scsi_sk_no_sense
= 0x0,
24 scsi_sk_recovered_error
= 0x1,
25 scsi_sk_not_ready
= 0x2,
26 scsi_sk_medium_error
= 0x3,
27 scsi_sk_hardware_error
= 0x4,
28 scsi_sk_illegal_request
= 0x5,
29 scsi_sk_unit_attention
= 0x6,
30 scsi_sk_data_protect
= 0x7,
31 scsi_sk_blank_check
= 0x8,
32 scsi_sk_vendor_specific
= 0x9,
33 scsi_sk_copy_aborted
= 0xa,
34 scsi_sk_aborted_command
= 0xb,
35 scsi_sk_volume_overflow
= 0xd,
36 scsi_sk_miscompare
= 0xe,
37 scsi_sk_reserved
= 0xf,
40 /* SPC3r23 4.5.6 Sense key and sense code definitions table 28 */
41 /* Note: only those which can be returned by an OSD target. Most of
42 * these errors are taken care of by the generic scsi layer.
44 enum osd_additional_sense_codes
{
45 scsi_no_additional_sense_information
= 0x0000,
46 scsi_operation_in_progress
= 0x0016,
47 scsi_cleaning_requested
= 0x0017,
48 scsi_lunr_cause_not_reportable
= 0x0400,
49 scsi_logical_unit_is_in_process_of_becoming_ready
= 0x0401,
50 scsi_lunr_initializing_command_required
= 0x0402,
51 scsi_lunr_manual_intervention_required
= 0x0403,
52 scsi_lunr_operation_in_progress
= 0x0407,
53 scsi_lunr_selftest_in_progress
= 0x0409,
54 scsi_luna_asymmetric_access_state_transition
= 0x040a,
55 scsi_luna_target_port_in_standby_state
= 0x040b,
56 scsi_luna_target_port_in_unavailable_state
= 0x040c,
57 scsi_lunr_notify_enable_spinup_required
= 0x0411,
58 scsi_logical_unit_does_not_respond_to_selection
= 0x0500,
59 scsi_logical_unit_communication_failure
= 0x0800,
60 scsi_logical_unit_communication_timeout
= 0x0801,
61 scsi_logical_unit_communication_parity_error
= 0x0802,
62 scsi_error_log_overflow
= 0x0a00,
63 scsi_warning
= 0x0b00,
64 scsi_warning_specified_temperature_exceeded
= 0x0b01,
65 scsi_warning_enclosure_degraded
= 0x0b02,
66 scsi_write_error_unexpected_unsolicited_data
= 0x0c0c,
67 scsi_write_error_not_enough_unsolicited_data
= 0x0c0d,
68 scsi_invalid_information_unit
= 0x0e00,
69 scsi_invalid_field_in_command_information_unit
= 0x0e03,
70 scsi_read_error_failed_retransmission_request
= 0x1113,
71 scsi_parameter_list_length_error
= 0x1a00,
72 scsi_invalid_command_operation_code
= 0x2000,
73 scsi_invalid_field_in_cdb
= 0x2400,
74 osd_security_audit_value_frozen
= 0x2404,
75 osd_security_working_key_frozen
= 0x2405,
76 osd_nonce_not_unique
= 0x2406,
77 osd_nonce_timestamp_out_of_range
= 0x2407,
78 scsi_logical_unit_not_supported
= 0x2500,
79 scsi_invalid_field_in_parameter_list
= 0x2600,
80 scsi_parameter_not_supported
= 0x2601,
81 scsi_parameter_value_invalid
= 0x2602,
82 scsi_invalid_release_of_persistent_reservation
= 0x2604,
83 osd_invalid_dataout_buffer_integrity_check_value
= 0x260f,
84 scsi_not_ready_to_ready_change_medium_may_have_changed
= 0x2800,
85 scsi_power_on_reset_or_bus_device_reset_occurred
= 0x2900,
86 scsi_power_on_occurred
= 0x2901,
87 scsi_scsi_bus_reset_occurred
= 0x2902,
88 scsi_bus_device_reset_function_occurred
= 0x2903,
89 scsi_device_internal_reset
= 0x2904,
90 scsi_transceiver_mode_changed_to_single_ended
= 0x2905,
91 scsi_transceiver_mode_changed_to_lvd
= 0x2906,
92 scsi_i_t_nexus_loss_occurred
= 0x2907,
93 scsi_parameters_changed
= 0x2a00,
94 scsi_mode_parameters_changed
= 0x2a01,
95 scsi_asymmetric_access_state_changed
= 0x2a06,
96 scsi_priority_changed
= 0x2a08,
97 scsi_command_sequence_error
= 0x2c00,
98 scsi_previous_busy_status
= 0x2c07,
99 scsi_previous_task_set_full_status
= 0x2c08,
100 scsi_previous_reservation_conflict_status
= 0x2c09,
101 osd_partition_or_collection_contains_user_objects
= 0x2c0a,
102 scsi_commands_cleared_by_another_initiator
= 0x2f00,
103 scsi_cleaning_failure
= 0x3007,
104 scsi_enclosure_failure
= 0x3400,
105 scsi_enclosure_services_failure
= 0x3500,
106 scsi_unsupported_enclosure_function
= 0x3501,
107 scsi_enclosure_services_unavailable
= 0x3502,
108 scsi_enclosure_services_transfer_failure
= 0x3503,
109 scsi_enclosure_services_transfer_refused
= 0x3504,
110 scsi_enclosure_services_checksum_error
= 0x3505,
111 scsi_rounded_parameter
= 0x3700,
112 osd_read_past_end_of_user_object
= 0x3b17,
113 scsi_logical_unit_has_not_self_configured_yet
= 0x3e00,
114 scsi_logical_unit_failure
= 0x3e01,
115 scsi_timeout_on_logical_unit
= 0x3e02,
116 scsi_logical_unit_failed_selftest
= 0x3e03,
117 scsi_logical_unit_unable_to_update_selftest_log
= 0x3e04,
118 scsi_target_operating_conditions_have_changed
= 0x3f00,
119 scsi_microcode_has_been_changed
= 0x3f01,
120 scsi_inquiry_data_has_changed
= 0x3f03,
121 scsi_echo_buffer_overwritten
= 0x3f0f,
122 scsi_diagnostic_failure_on_component_nn_first
= 0x4080,
123 scsi_diagnostic_failure_on_component_nn_last
= 0x40ff,
124 scsi_message_error
= 0x4300,
125 scsi_internal_target_failure
= 0x4400,
126 scsi_select_or_reselect_failure
= 0x4500,
127 scsi_scsi_parity_error
= 0x4700,
128 scsi_data_phase_crc_error_detected
= 0x4701,
129 scsi_scsi_parity_error_detected_during_st_data_phase
= 0x4702,
130 scsi_asynchronous_information_protection_error_detected
= 0x4704,
131 scsi_protocol_service_crc_error
= 0x4705,
132 scsi_phy_test_function_in_progress
= 0x4706,
133 scsi_invalid_message_error
= 0x4900,
134 scsi_command_phase_error
= 0x4a00,
135 scsi_data_phase_error
= 0x4b00,
136 scsi_logical_unit_failed_self_configuration
= 0x4c00,
137 scsi_overlapped_commands_attempted
= 0x4e00,
138 osd_quota_error
= 0x5507,
139 scsi_failure_prediction_threshold_exceeded
= 0x5d00,
140 scsi_failure_prediction_threshold_exceeded_false
= 0x5dff,
141 scsi_voltage_fault
= 0x6500,
144 enum scsi_descriptor_types
{
145 scsi_sense_information
= 0x0,
146 scsi_sense_command_specific_information
= 0x1,
147 scsi_sense_key_specific
= 0x2,
148 scsi_sense_field_replaceable_unit
= 0x3,
149 scsi_sense_stream_commands
= 0x4,
150 scsi_sense_block_commands
= 0x5,
151 osd_sense_object_identification
= 0x6,
152 osd_sense_response_integrity_check
= 0x7,
153 osd_sense_attribute_identification
= 0x8,
154 scsi_sense_ata_return
= 0x9,
156 scsi_sense_Reserved_first
= 0x0A,
157 scsi_sense_Reserved_last
= 0x7F,
158 scsi_sense_Vendor_specific_first
= 0x80,
159 scsi_sense_Vendor_specific_last
= 0xFF,
162 struct scsi_sense_descriptor
{ /* for picking into desc type */
163 u8 descriptor_type
; /* one of enum scsi_descriptor_types */
164 u8 additional_length
; /* n - 1 */
168 /* OSD deploys only scsi descriptor_based sense buffers */
169 struct scsi_sense_descriptor_based
{
170 /*0*/ u8 response_code
; /* 0x72 or 0x73 */
171 /*1*/ u8 sense_key
; /* one of enum scsi_sense_keys (4 lower bits) */
172 /*2*/ __be16 additional_sense_code
; /* enum osd_additional_sense_codes */
173 /*4*/ u8 Reserved
[3];
174 /*7*/ u8 additional_sense_length
; /* n - 7 */
175 /*8*/ struct scsi_sense_descriptor ssd
[0]; /* variable length, 1 or more */
178 /* some descriptors deployed by OSD */
180 /* SPC3r23 4.5.2.3 Command-specific information sense data descriptor */
181 /* Note: this is the same for descriptor_type=00 but with type=00 the
182 * Reserved[0] == 0x80 (ie. bit-7 set)
184 struct scsi_sense_command_specific_data_descriptor
{
185 /*0*/ u8 descriptor_type
; /* (00h/01h) */
186 /*1*/ u8 additional_length
; /* (0Ah) */
187 /*2*/ u8 Reserved
[2];
188 /*4*/ __be64 information
;
192 struct scsi_sense_key_specific_data_descriptor
{
193 /*0*/ u8 descriptor_type
; /* (02h) */
194 /*1*/ u8 additional_length
; /* (06h) */
195 /*2*/ u8 Reserved
[2];
196 /* SKSV, C/D, Reserved (2), BPV, BIT POINTER (3) */
197 /*4*/ u8 sksv_cd_bpv_bp
;
198 /*5*/ __be16 value
; /* field-pointer/progress-value/retry-count/... */
203 /* 4.16.2.1 OSD error identification sense data descriptor - table 52 */
204 /* Note: these bits are defined LE order for easy definition, this way the BIT()
205 * number is the same as in the documentation. Below members at
206 * osd_sense_identification_data_descriptor are therefore defined __le32.
208 enum osd_command_functions_bits
{
209 OSD_CFB_COMMAND
= BIT(4),
210 OSD_CFB_CMD_CAP_VERIFIED
= BIT(5),
211 OSD_CFB_VALIDATION
= BIT(7),
212 OSD_CFB_IMP_ST_ATT
= BIT(12),
213 OSD_CFB_SET_ATT
= BIT(20),
214 OSD_CFB_SA_CAP_VERIFIED
= BIT(21),
215 OSD_CFB_GET_ATT
= BIT(28),
216 OSD_CFB_GA_CAP_VERIFIED
= BIT(29),
219 struct osd_sense_identification_data_descriptor
{
220 /*0*/ u8 descriptor_type
; /* (06h) */
221 /*1*/ u8 additional_length
; /* (1Eh) */
222 /*2*/ u8 Reserved
[6];
223 /*8*/ __le32 not_initiated_functions
; /*osd_command_functions_bits*/
224 /*12*/ __le32 completed_functions
; /*osd_command_functions_bits*/
225 /*16*/ __be64 partition_id
;
226 /*24*/ __be64 object_id
;
230 struct osd_sense_response_integrity_check_descriptor
{
231 /*0*/ u8 descriptor_type
; /* (07h) */
232 /*1*/ u8 additional_length
; /* (20h) */
233 /*2*/ u8 integrity_check_value
[32]; /*FIXME: OSDv2_CRYPTO_KEYID_SIZE*/
237 struct osd_sense_attributes_data_descriptor
{
238 /*0*/ u8 descriptor_type
; /* (08h) */
239 /*1*/ u8 additional_length
; /* (n-2) */
240 /*2*/ u8 Reserved
[6];
241 struct osd_sense_attr
{
242 /*8*/ __be32 attr_page
;
243 /*12*/ __be32 attr_id
;
244 /*16*/ } sense_attrs
[0]; /* 1 or more */
248 /* Dig into scsi_sk_illegal_request/scsi_invalid_field_in_cdb errors */
250 /*FIXME: Support also field in CAPS*/
251 #define OSD_CDB_OFFSET(F) offsetof(struct osd_cdb_head, F)
253 enum osdv2_cdb_field_offset
{
254 OSDv1_CFO_STARTING_BYTE
= OSD_CDB_OFFSET(v1
.start_address
),
255 OSD_CFO_STARTING_BYTE
= OSD_CDB_OFFSET(v2
.start_address
),
256 OSD_CFO_PARTITION_ID
= OSD_CDB_OFFSET(partition
),
257 OSD_CFO_OBJECT_ID
= OSD_CDB_OFFSET(object
),
260 #endif /* ndef __OSD_SENSE_H__ */