[POWERPC] Add mktree utility to arch/powerpc/boot
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / powerpc / boot / mktree.c
blob4cb89299365163df4e777610129aee67226dbc8f
1 /*
2 * Makes a tree bootable image for IBM Evaluation boards.
3 * Basically, just take a zImage, skip the ELF header, and stuff
4 * a 32 byte header on the front.
6 * We use htonl, which is a network macro, to make sure we're doing
7 * The Right Thing on an LE machine. It's non-obvious, but it should
8 * work on anything BSD'ish.
9 */
11 #include <fcntl.h>
12 #include <stdio.h>
13 #include <stdlib.h>
14 #include <string.h>
15 #include <sys/stat.h>
16 #include <unistd.h>
17 #include <netinet/in.h>
18 #ifdef __sun__
19 #include <inttypes.h>
20 #else
21 #include <stdint.h>
22 #endif
24 /* This gets tacked on the front of the image. There are also a few
25 * bytes allocated after the _start label used by the boot rom (see
26 * head.S for details).
28 typedef struct boot_block {
29 uint32_t bb_magic; /* 0x0052504F */
30 uint32_t bb_dest; /* Target address of the image */
31 uint32_t bb_num_512blocks; /* Size, rounded-up, in 512 byte blks */
32 uint32_t bb_debug_flag; /* Run debugger or image after load */
33 uint32_t bb_entry_point; /* The image address to start */
34 uint32_t bb_checksum; /* 32 bit checksum including header */
35 uint32_t reserved[2];
36 } boot_block_t;
38 #define IMGBLK 512
39 char tmpbuf[IMGBLK];
41 int main(int argc, char *argv[])
43 int in_fd, out_fd;
44 int nblks, i;
45 uint cksum, *cp;
46 struct stat st;
47 boot_block_t bt;
49 if (argc < 3) {
50 fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]);
51 exit(1);
54 if (stat(argv[1], &st) < 0) {
55 perror("stat");
56 exit(2);
59 nblks = (st.st_size + IMGBLK) / IMGBLK;
61 bt.bb_magic = htonl(0x0052504F);
63 /* If we have the optional entry point parameter, use it */
64 if (argc == 4)
65 bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0));
66 else
67 bt.bb_dest = bt.bb_entry_point = htonl(0x500000);
69 /* We know these from the linker command.
70 * ...and then move it up into memory a little more so the
71 * relocation can happen.
73 bt.bb_num_512blocks = htonl(nblks);
74 bt.bb_debug_flag = 0;
76 bt.bb_checksum = 0;
78 /* To be neat and tidy :-).
80 bt.reserved[0] = 0;
81 bt.reserved[1] = 0;
83 if ((in_fd = open(argv[1], O_RDONLY)) < 0) {
84 perror("zImage open");
85 exit(3);
88 if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) {
89 perror("bootfile open");
90 exit(3);
93 cksum = 0;
94 cp = (void *)&bt;
95 for (i=0; i<sizeof(bt)/sizeof(uint); i++)
96 cksum += *cp++;
98 /* Assume zImage is an ELF file, and skip the 64K header.
100 if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
101 fprintf(stderr, "%s is too small to be an ELF image\n",
102 argv[1]);
103 exit(4);
106 if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
107 fprintf(stderr, "%s is not an ELF image\n", argv[1]);
108 exit(4);
111 if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) {
112 fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]);
113 exit(4);
116 nblks -= (64 * 1024) / IMGBLK;
118 /* And away we go......
120 if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
121 perror("boot-image write");
122 exit(5);
125 while (nblks-- > 0) {
126 if (read(in_fd, tmpbuf, IMGBLK) < 0) {
127 perror("zImage read");
128 exit(5);
130 cp = (uint *)tmpbuf;
131 for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
132 cksum += *cp++;
133 if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
134 perror("boot-image write");
135 exit(5);
139 /* rewrite the header with the computed checksum.
141 bt.bb_checksum = htonl(cksum);
142 if (lseek(out_fd, 0, SEEK_SET) < 0) {
143 perror("rewrite seek");
144 exit(1);
146 if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
147 perror("boot-image rewrite");
148 exit(1);
151 exit(0);