2 * drivers/media/video/tvp514x.c
4 * TI TVP5146/47 decoder driver
6 * Copyright (C) 2008 Texas Instruments Inc
7 * Author: Vaibhav Hiremath <hvaibhav@ti.com>
10 * Sivaraj R <sivaraj@ti.com>
11 * Brijesh R Jadav <brijesh.j@ti.com>
12 * Hardik Shah <hardik.shah@ti.com>
13 * Manjunath Hadli <mrh@ti.com>
14 * Karicheri Muralidharan <m-karicheri2@ti.com>
16 * This package is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License version 2 as
18 * published by the Free Software Foundation.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
31 #include <linux/i2c.h>
32 #include <linux/slab.h>
33 #include <linux/delay.h>
34 #include <linux/videodev2.h>
36 #include <media/v4l2-device.h>
37 #include <media/v4l2-common.h>
38 #include <media/v4l2-mediabus.h>
39 #include <media/v4l2-chip-ident.h>
40 #include <media/tvp514x.h>
42 #include "tvp514x_regs.h"
45 #define TVP514X_MODULE_NAME "tvp514x"
47 /* Private macros for TVP */
48 #define I2C_RETRY_COUNT (5)
49 #define LOCK_RETRY_COUNT (5)
50 #define LOCK_RETRY_DELAY (200)
54 module_param(debug
, bool, 0644);
55 MODULE_PARM_DESC(debug
, "Debug level (0-1)");
57 MODULE_AUTHOR("Texas Instruments");
58 MODULE_DESCRIPTION("TVP514X linux decoder driver");
59 MODULE_LICENSE("GPL");
61 /* enum tvp514x_std - enum for supported standards */
69 * struct tvp514x_std_info - Structure to store standard informations
70 * @width: Line width in pixels
71 * @height:Number of active lines
72 * @video_std: Value to write in REG_VIDEO_STD register
73 * @standard: v4l2 standard structure information
75 struct tvp514x_std_info
{
79 struct v4l2_standard standard
;
82 static struct tvp514x_reg tvp514x_reg_list_default
[0x40];
84 static int tvp514x_s_stream(struct v4l2_subdev
*sd
, int enable
);
86 * struct tvp514x_decoder - TVP5146/47 decoder object
87 * @sd: Subdevice Slave handle
88 * @tvp514x_regs: copy of hw's regs with preset values.
89 * @pdata: Board specific
91 * @streaming: TVP5146/47 decoder streaming - enabled or disabled.
92 * @current_std: Current standard
93 * @num_stds: Number of standards
94 * @std_list: Standards list
95 * @input: Input routing at chip level
96 * @output: Output routing at chip level
98 struct tvp514x_decoder
{
99 struct v4l2_subdev sd
;
100 struct tvp514x_reg tvp514x_regs
[ARRAY_SIZE(tvp514x_reg_list_default
)];
101 const struct tvp514x_platform_data
*pdata
;
106 enum tvp514x_std current_std
;
108 const struct tvp514x_std_info
*std_list
;
109 /* Input and Output Routing parameters */
114 /* TVP514x default register values */
115 static struct tvp514x_reg tvp514x_reg_list_default
[] = {
116 /* Composite selected */
117 {TOK_WRITE
, REG_INPUT_SEL
, 0x05},
118 {TOK_WRITE
, REG_AFE_GAIN_CTRL
, 0x0F},
120 {TOK_WRITE
, REG_VIDEO_STD
, 0x00},
121 {TOK_WRITE
, REG_OPERATION_MODE
, 0x00},
122 {TOK_SKIP
, REG_AUTOSWITCH_MASK
, 0x3F},
123 {TOK_WRITE
, REG_COLOR_KILLER
, 0x10},
124 {TOK_WRITE
, REG_LUMA_CONTROL1
, 0x00},
125 {TOK_WRITE
, REG_LUMA_CONTROL2
, 0x00},
126 {TOK_WRITE
, REG_LUMA_CONTROL3
, 0x02},
127 {TOK_WRITE
, REG_BRIGHTNESS
, 0x80},
128 {TOK_WRITE
, REG_CONTRAST
, 0x80},
129 {TOK_WRITE
, REG_SATURATION
, 0x80},
130 {TOK_WRITE
, REG_HUE
, 0x00},
131 {TOK_WRITE
, REG_CHROMA_CONTROL1
, 0x00},
132 {TOK_WRITE
, REG_CHROMA_CONTROL2
, 0x0E},
134 {TOK_SKIP
, 0x0F, 0x00},
135 {TOK_WRITE
, REG_COMP_PR_SATURATION
, 0x80},
136 {TOK_WRITE
, REG_COMP_Y_CONTRAST
, 0x80},
137 {TOK_WRITE
, REG_COMP_PB_SATURATION
, 0x80},
139 {TOK_SKIP
, 0x13, 0x00},
140 {TOK_WRITE
, REG_COMP_Y_BRIGHTNESS
, 0x80},
142 {TOK_SKIP
, 0x15, 0x00},
144 {TOK_SKIP
, REG_AVID_START_PIXEL_LSB
, 0x55},
145 {TOK_SKIP
, REG_AVID_START_PIXEL_MSB
, 0x00},
146 {TOK_SKIP
, REG_AVID_STOP_PIXEL_LSB
, 0x25},
147 {TOK_SKIP
, REG_AVID_STOP_PIXEL_MSB
, 0x03},
149 {TOK_SKIP
, REG_HSYNC_START_PIXEL_LSB
, 0x00},
150 {TOK_SKIP
, REG_HSYNC_START_PIXEL_MSB
, 0x00},
151 {TOK_SKIP
, REG_HSYNC_STOP_PIXEL_LSB
, 0x40},
152 {TOK_SKIP
, REG_HSYNC_STOP_PIXEL_MSB
, 0x00},
154 {TOK_SKIP
, REG_VSYNC_START_LINE_LSB
, 0x04},
155 {TOK_SKIP
, REG_VSYNC_START_LINE_MSB
, 0x00},
156 {TOK_SKIP
, REG_VSYNC_STOP_LINE_LSB
, 0x07},
157 {TOK_SKIP
, REG_VSYNC_STOP_LINE_MSB
, 0x00},
159 {TOK_SKIP
, REG_VBLK_START_LINE_LSB
, 0x01},
160 {TOK_SKIP
, REG_VBLK_START_LINE_MSB
, 0x00},
161 {TOK_SKIP
, REG_VBLK_STOP_LINE_LSB
, 0x15},
162 {TOK_SKIP
, REG_VBLK_STOP_LINE_MSB
, 0x00},
164 {TOK_SKIP
, 0x26, 0x00},
166 {TOK_SKIP
, 0x27, 0x00},
167 {TOK_SKIP
, REG_FAST_SWTICH_CONTROL
, 0xCC},
169 {TOK_SKIP
, 0x29, 0x00},
170 {TOK_SKIP
, REG_FAST_SWTICH_SCART_DELAY
, 0x00},
172 {TOK_SKIP
, 0x2B, 0x00},
173 {TOK_SKIP
, REG_SCART_DELAY
, 0x00},
174 {TOK_SKIP
, REG_CTI_DELAY
, 0x00},
175 {TOK_SKIP
, REG_CTI_CONTROL
, 0x00},
177 {TOK_SKIP
, 0x2F, 0x00},
179 {TOK_SKIP
, 0x30, 0x00},
181 {TOK_SKIP
, 0x31, 0x00},
182 /* HS, VS active high */
183 {TOK_WRITE
, REG_SYNC_CONTROL
, 0x00},
185 {TOK_WRITE
, REG_OUTPUT_FORMATTER1
, 0x00},
186 /* Enable clk & data */
187 {TOK_WRITE
, REG_OUTPUT_FORMATTER2
, 0x11},
188 /* Enable AVID & FLD */
189 {TOK_WRITE
, REG_OUTPUT_FORMATTER3
, 0xEE},
191 {TOK_WRITE
, REG_OUTPUT_FORMATTER4
, 0xAF},
192 {TOK_WRITE
, REG_OUTPUT_FORMATTER5
, 0xFF},
193 {TOK_WRITE
, REG_OUTPUT_FORMATTER6
, 0xFF},
195 {TOK_WRITE
, REG_CLEAR_LOST_LOCK
, 0x01},
200 * Supported standards -
202 * Currently supports two standards only, need to add support for rest of the
203 * modes, like SECAM, etc...
205 static const struct tvp514x_std_info tvp514x_std_list
[] = {
206 /* Standard: STD_NTSC_MJ */
208 .width
= NTSC_NUM_ACTIVE_PIXELS
,
209 .height
= NTSC_NUM_ACTIVE_LINES
,
210 .video_std
= VIDEO_STD_NTSC_MJ_BIT
,
215 .frameperiod
= {1001, 30000},
218 /* Standard: STD_PAL_BDGHIN */
221 .width
= PAL_NUM_ACTIVE_PIXELS
,
222 .height
= PAL_NUM_ACTIVE_LINES
,
223 .video_std
= VIDEO_STD_PAL_BDGHIN_BIT
,
228 .frameperiod
= {1, 25},
232 /* Standard: need to add for additional standard */
236 static inline struct tvp514x_decoder
*to_decoder(struct v4l2_subdev
*sd
)
238 return container_of(sd
, struct tvp514x_decoder
, sd
);
243 * tvp514x_read_reg() - Read a value from a register in an TVP5146/47.
244 * @sd: ptr to v4l2_subdev struct
245 * @reg: TVP5146/47 register address
247 * Returns value read if successful, or non-zero (-1) otherwise.
249 static int tvp514x_read_reg(struct v4l2_subdev
*sd
, u8 reg
)
252 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
256 err
= i2c_smbus_read_byte_data(client
, reg
);
258 if (retry
<= I2C_RETRY_COUNT
) {
259 v4l2_warn(sd
, "Read: retry ... %d\n", retry
);
261 msleep_interruptible(10);
270 * dump_reg() - dump the register content of TVP5146/47.
271 * @sd: ptr to v4l2_subdev struct
272 * @reg: TVP5146/47 register address
274 static void dump_reg(struct v4l2_subdev
*sd
, u8 reg
)
278 val
= tvp514x_read_reg(sd
, reg
);
279 v4l2_info(sd
, "Reg(0x%.2X): 0x%.2X\n", reg
, val
);
283 * tvp514x_write_reg() - Write a value to a register in TVP5146/47
284 * @sd: ptr to v4l2_subdev struct
285 * @reg: TVP5146/47 register address
286 * @val: value to be written to the register
288 * Write a value to a register in an TVP5146/47 decoder device.
289 * Returns zero if successful, or non-zero otherwise.
291 static int tvp514x_write_reg(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
294 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
298 err
= i2c_smbus_write_byte_data(client
, reg
, val
);
300 if (retry
<= I2C_RETRY_COUNT
) {
301 v4l2_warn(sd
, "Write: retry ... %d\n", retry
);
303 msleep_interruptible(10);
312 * tvp514x_write_regs() : Initializes a list of TVP5146/47 registers
313 * @sd: ptr to v4l2_subdev struct
314 * @reglist: list of TVP5146/47 registers and values
316 * Initializes a list of TVP5146/47 registers:-
317 * if token is TOK_TERM, then entire write operation terminates
318 * if token is TOK_DELAY, then a delay of 'val' msec is introduced
319 * if token is TOK_SKIP, then the register write is skipped
320 * if token is TOK_WRITE, then the register write is performed
321 * Returns zero if successful, or non-zero otherwise.
323 static int tvp514x_write_regs(struct v4l2_subdev
*sd
,
324 const struct tvp514x_reg reglist
[])
327 const struct tvp514x_reg
*next
= reglist
;
329 for (; next
->token
!= TOK_TERM
; next
++) {
330 if (next
->token
== TOK_DELAY
) {
335 if (next
->token
== TOK_SKIP
)
338 err
= tvp514x_write_reg(sd
, next
->reg
, (u8
) next
->val
);
340 v4l2_err(sd
, "Write failed. Err[%d]\n", err
);
348 * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47
349 * @sd: ptr to v4l2_subdev struct
351 * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no
354 static enum tvp514x_std
tvp514x_query_current_std(struct v4l2_subdev
*sd
)
358 std
= tvp514x_read_reg(sd
, REG_VIDEO_STD
);
359 if ((std
& VIDEO_STD_MASK
) == VIDEO_STD_AUTO_SWITCH_BIT
)
360 /* use the standard status register */
361 std_status
= tvp514x_read_reg(sd
, REG_VIDEO_STD_STATUS
);
363 /* use the standard register itself */
366 switch (std_status
& VIDEO_STD_MASK
) {
367 case VIDEO_STD_NTSC_MJ_BIT
:
370 case VIDEO_STD_PAL_BDGHIN_BIT
:
371 return STD_PAL_BDGHIN
;
380 /* TVP5146/47 register dump function */
381 static void tvp514x_reg_dump(struct v4l2_subdev
*sd
)
383 dump_reg(sd
, REG_INPUT_SEL
);
384 dump_reg(sd
, REG_AFE_GAIN_CTRL
);
385 dump_reg(sd
, REG_VIDEO_STD
);
386 dump_reg(sd
, REG_OPERATION_MODE
);
387 dump_reg(sd
, REG_COLOR_KILLER
);
388 dump_reg(sd
, REG_LUMA_CONTROL1
);
389 dump_reg(sd
, REG_LUMA_CONTROL2
);
390 dump_reg(sd
, REG_LUMA_CONTROL3
);
391 dump_reg(sd
, REG_BRIGHTNESS
);
392 dump_reg(sd
, REG_CONTRAST
);
393 dump_reg(sd
, REG_SATURATION
);
394 dump_reg(sd
, REG_HUE
);
395 dump_reg(sd
, REG_CHROMA_CONTROL1
);
396 dump_reg(sd
, REG_CHROMA_CONTROL2
);
397 dump_reg(sd
, REG_COMP_PR_SATURATION
);
398 dump_reg(sd
, REG_COMP_Y_CONTRAST
);
399 dump_reg(sd
, REG_COMP_PB_SATURATION
);
400 dump_reg(sd
, REG_COMP_Y_BRIGHTNESS
);
401 dump_reg(sd
, REG_AVID_START_PIXEL_LSB
);
402 dump_reg(sd
, REG_AVID_START_PIXEL_MSB
);
403 dump_reg(sd
, REG_AVID_STOP_PIXEL_LSB
);
404 dump_reg(sd
, REG_AVID_STOP_PIXEL_MSB
);
405 dump_reg(sd
, REG_HSYNC_START_PIXEL_LSB
);
406 dump_reg(sd
, REG_HSYNC_START_PIXEL_MSB
);
407 dump_reg(sd
, REG_HSYNC_STOP_PIXEL_LSB
);
408 dump_reg(sd
, REG_HSYNC_STOP_PIXEL_MSB
);
409 dump_reg(sd
, REG_VSYNC_START_LINE_LSB
);
410 dump_reg(sd
, REG_VSYNC_START_LINE_MSB
);
411 dump_reg(sd
, REG_VSYNC_STOP_LINE_LSB
);
412 dump_reg(sd
, REG_VSYNC_STOP_LINE_MSB
);
413 dump_reg(sd
, REG_VBLK_START_LINE_LSB
);
414 dump_reg(sd
, REG_VBLK_START_LINE_MSB
);
415 dump_reg(sd
, REG_VBLK_STOP_LINE_LSB
);
416 dump_reg(sd
, REG_VBLK_STOP_LINE_MSB
);
417 dump_reg(sd
, REG_SYNC_CONTROL
);
418 dump_reg(sd
, REG_OUTPUT_FORMATTER1
);
419 dump_reg(sd
, REG_OUTPUT_FORMATTER2
);
420 dump_reg(sd
, REG_OUTPUT_FORMATTER3
);
421 dump_reg(sd
, REG_OUTPUT_FORMATTER4
);
422 dump_reg(sd
, REG_OUTPUT_FORMATTER5
);
423 dump_reg(sd
, REG_OUTPUT_FORMATTER6
);
424 dump_reg(sd
, REG_CLEAR_LOST_LOCK
);
428 * tvp514x_configure() - Configure the TVP5146/47 registers
429 * @sd: ptr to v4l2_subdev struct
430 * @decoder: ptr to tvp514x_decoder structure
432 * Returns zero if successful, or non-zero otherwise.
434 static int tvp514x_configure(struct v4l2_subdev
*sd
,
435 struct tvp514x_decoder
*decoder
)
439 /* common register initialization */
441 tvp514x_write_regs(sd
, decoder
->tvp514x_regs
);
446 tvp514x_reg_dump(sd
);
452 * tvp514x_detect() - Detect if an tvp514x is present, and if so which revision.
453 * @sd: pointer to standard V4L2 sub-device structure
454 * @decoder: pointer to tvp514x_decoder structure
456 * A device is considered to be detected if the chip ID (LSB and MSB)
457 * registers match the expected values.
458 * Any value of the rom version register is accepted.
459 * Returns ENODEV error number if no device is detected, or zero
460 * if a device is detected.
462 static int tvp514x_detect(struct v4l2_subdev
*sd
,
463 struct tvp514x_decoder
*decoder
)
465 u8 chip_id_msb
, chip_id_lsb
, rom_ver
;
466 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
468 chip_id_msb
= tvp514x_read_reg(sd
, REG_CHIP_ID_MSB
);
469 chip_id_lsb
= tvp514x_read_reg(sd
, REG_CHIP_ID_LSB
);
470 rom_ver
= tvp514x_read_reg(sd
, REG_ROM_VERSION
);
472 v4l2_dbg(1, debug
, sd
,
473 "chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n",
474 chip_id_msb
, chip_id_lsb
, rom_ver
);
475 if ((chip_id_msb
!= TVP514X_CHIP_ID_MSB
)
476 || ((chip_id_lsb
!= TVP5146_CHIP_ID_LSB
)
477 && (chip_id_lsb
!= TVP5147_CHIP_ID_LSB
))) {
478 /* We didn't read the values we expected, so this must not be
481 v4l2_err(sd
, "chip id mismatch msb:0x%x lsb:0x%x\n",
482 chip_id_msb
, chip_id_lsb
);
486 decoder
->ver
= rom_ver
;
488 v4l2_info(sd
, "%s (Version - 0x%.2x) found at 0x%x (%s)\n",
489 client
->name
, decoder
->ver
,
490 client
->addr
<< 1, client
->adapter
->name
);
495 * tvp514x_querystd() - V4L2 decoder interface handler for querystd
496 * @sd: pointer to standard V4L2 sub-device structure
497 * @std_id: standard V4L2 std_id ioctl enum
499 * Returns the current standard detected by TVP5146/47. If no active input is
500 * detected then *std_id is set to 0 and the function returns 0.
502 static int tvp514x_querystd(struct v4l2_subdev
*sd
, v4l2_std_id
*std_id
)
504 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
505 enum tvp514x_std current_std
;
506 enum tvp514x_input input_sel
;
507 u8 sync_lock_status
, lock_mask
;
512 *std_id
= V4L2_STD_UNKNOWN
;
514 /* query the current standard */
515 current_std
= tvp514x_query_current_std(sd
);
516 if (current_std
== STD_INVALID
)
519 input_sel
= decoder
->input
;
522 case INPUT_CVBS_VI1A
:
523 case INPUT_CVBS_VI1B
:
524 case INPUT_CVBS_VI1C
:
525 case INPUT_CVBS_VI2A
:
526 case INPUT_CVBS_VI2B
:
527 case INPUT_CVBS_VI2C
:
528 case INPUT_CVBS_VI3A
:
529 case INPUT_CVBS_VI3B
:
530 case INPUT_CVBS_VI3C
:
531 case INPUT_CVBS_VI4A
:
532 lock_mask
= STATUS_CLR_SUBCAR_LOCK_BIT
|
533 STATUS_HORZ_SYNC_LOCK_BIT
|
534 STATUS_VIRT_SYNC_LOCK_BIT
;
537 case INPUT_SVIDEO_VI2A_VI1A
:
538 case INPUT_SVIDEO_VI2B_VI1B
:
539 case INPUT_SVIDEO_VI2C_VI1C
:
540 case INPUT_SVIDEO_VI2A_VI3A
:
541 case INPUT_SVIDEO_VI2B_VI3B
:
542 case INPUT_SVIDEO_VI2C_VI3C
:
543 case INPUT_SVIDEO_VI4A_VI1A
:
544 case INPUT_SVIDEO_VI4A_VI1B
:
545 case INPUT_SVIDEO_VI4A_VI1C
:
546 case INPUT_SVIDEO_VI4A_VI3A
:
547 case INPUT_SVIDEO_VI4A_VI3B
:
548 case INPUT_SVIDEO_VI4A_VI3C
:
549 lock_mask
= STATUS_HORZ_SYNC_LOCK_BIT
|
550 STATUS_VIRT_SYNC_LOCK_BIT
;
552 /*Need to add other interfaces*/
556 /* check whether signal is locked */
557 sync_lock_status
= tvp514x_read_reg(sd
, REG_STATUS1
);
558 if (lock_mask
!= (sync_lock_status
& lock_mask
))
559 return 0; /* No input detected */
561 *std_id
= decoder
->std_list
[current_std
].standard
.id
;
563 v4l2_dbg(1, debug
, sd
, "Current STD: %s\n",
564 decoder
->std_list
[current_std
].standard
.name
);
569 * tvp514x_s_std() - V4L2 decoder interface handler for s_std
570 * @sd: pointer to standard V4L2 sub-device structure
571 * @std_id: standard V4L2 v4l2_std_id ioctl enum
573 * If std_id is supported, sets the requested standard. Otherwise, returns
576 static int tvp514x_s_std(struct v4l2_subdev
*sd
, v4l2_std_id std_id
)
578 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
581 for (i
= 0; i
< decoder
->num_stds
; i
++)
582 if (std_id
& decoder
->std_list
[i
].standard
.id
)
585 if ((i
== decoder
->num_stds
) || (i
== STD_INVALID
))
588 err
= tvp514x_write_reg(sd
, REG_VIDEO_STD
,
589 decoder
->std_list
[i
].video_std
);
593 decoder
->current_std
= i
;
594 decoder
->tvp514x_regs
[REG_VIDEO_STD
].val
=
595 decoder
->std_list
[i
].video_std
;
597 v4l2_dbg(1, debug
, sd
, "Standard set to: %s\n",
598 decoder
->std_list
[i
].standard
.name
);
603 * tvp514x_s_routing() - V4L2 decoder interface handler for s_routing
604 * @sd: pointer to standard V4L2 sub-device structure
605 * @input: input selector for routing the signal
606 * @output: output selector for routing the signal
607 * @config: config value. Not used
609 * If index is valid, selects the requested input. Otherwise, returns -EINVAL if
610 * the input is not supported or there is no active signal present in the
613 static int tvp514x_s_routing(struct v4l2_subdev
*sd
,
614 u32 input
, u32 output
, u32 config
)
616 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
618 enum tvp514x_input input_sel
;
619 enum tvp514x_output output_sel
;
620 u8 sync_lock_status
, lock_mask
;
621 int try_count
= LOCK_RETRY_COUNT
;
623 if ((input
>= INPUT_INVALID
) ||
624 (output
>= OUTPUT_INVALID
))
625 /* Index out of bound */
629 * For the sequence streamon -> streamoff and again s_input
630 * it fails to lock the signal, since streamoff puts TVP514x
631 * into power off state which leads to failure in sub-sequent s_input.
633 * So power up the TVP514x device here, since it is important to lock
634 * the signal at this stage.
636 if (!decoder
->streaming
)
637 tvp514x_s_stream(sd
, 1);
642 err
= tvp514x_write_reg(sd
, REG_INPUT_SEL
, input_sel
);
646 output_sel
|= tvp514x_read_reg(sd
,
647 REG_OUTPUT_FORMATTER1
) & 0x7;
648 err
= tvp514x_write_reg(sd
, REG_OUTPUT_FORMATTER1
,
653 decoder
->tvp514x_regs
[REG_INPUT_SEL
].val
= input_sel
;
654 decoder
->tvp514x_regs
[REG_OUTPUT_FORMATTER1
].val
= output_sel
;
657 msleep(LOCK_RETRY_DELAY
);
659 tvp514x_write_reg(sd
, REG_CLEAR_LOST_LOCK
, 0x01);
664 case INPUT_CVBS_VI1A
:
665 case INPUT_CVBS_VI1B
:
666 case INPUT_CVBS_VI1C
:
667 case INPUT_CVBS_VI2A
:
668 case INPUT_CVBS_VI2B
:
669 case INPUT_CVBS_VI2C
:
670 case INPUT_CVBS_VI3A
:
671 case INPUT_CVBS_VI3B
:
672 case INPUT_CVBS_VI3C
:
673 case INPUT_CVBS_VI4A
:
674 lock_mask
= STATUS_CLR_SUBCAR_LOCK_BIT
|
675 STATUS_HORZ_SYNC_LOCK_BIT
|
676 STATUS_VIRT_SYNC_LOCK_BIT
;
679 case INPUT_SVIDEO_VI2A_VI1A
:
680 case INPUT_SVIDEO_VI2B_VI1B
:
681 case INPUT_SVIDEO_VI2C_VI1C
:
682 case INPUT_SVIDEO_VI2A_VI3A
:
683 case INPUT_SVIDEO_VI2B_VI3B
:
684 case INPUT_SVIDEO_VI2C_VI3C
:
685 case INPUT_SVIDEO_VI4A_VI1A
:
686 case INPUT_SVIDEO_VI4A_VI1B
:
687 case INPUT_SVIDEO_VI4A_VI1C
:
688 case INPUT_SVIDEO_VI4A_VI3A
:
689 case INPUT_SVIDEO_VI4A_VI3B
:
690 case INPUT_SVIDEO_VI4A_VI3C
:
691 lock_mask
= STATUS_HORZ_SYNC_LOCK_BIT
|
692 STATUS_VIRT_SYNC_LOCK_BIT
;
694 /* Need to add other interfaces*/
699 while (try_count
-- > 0) {
700 /* Allow decoder to sync up with new input */
701 msleep(LOCK_RETRY_DELAY
);
703 sync_lock_status
= tvp514x_read_reg(sd
,
705 if (lock_mask
== (sync_lock_status
& lock_mask
))
713 decoder
->input
= input
;
714 decoder
->output
= output
;
716 v4l2_dbg(1, debug
, sd
, "Input set to: %d\n", input_sel
);
722 * tvp514x_queryctrl() - V4L2 decoder interface handler for queryctrl
723 * @sd: pointer to standard V4L2 sub-device structure
724 * @qctrl: standard V4L2 v4l2_queryctrl structure
726 * If the requested control is supported, returns the control information.
727 * Otherwise, returns -EINVAL if the control is not supported.
730 tvp514x_queryctrl(struct v4l2_subdev
*sd
, struct v4l2_queryctrl
*qctrl
)
738 case V4L2_CID_BRIGHTNESS
:
739 /* Brightness supported is (0-255), */
740 err
= v4l2_ctrl_query_fill(qctrl
, 0, 255, 1, 128);
742 case V4L2_CID_CONTRAST
:
743 case V4L2_CID_SATURATION
:
745 * Saturation and Contrast supported is -
746 * Contrast: 0 - 255 (Default - 128)
747 * Saturation: 0 - 255 (Default - 128)
749 err
= v4l2_ctrl_query_fill(qctrl
, 0, 255, 1, 128);
752 /* Hue Supported is -
753 * Hue - -180 - +180 (Default - 0, Step - +180)
755 err
= v4l2_ctrl_query_fill(qctrl
, -180, 180, 180, 0);
757 case V4L2_CID_AUTOGAIN
:
759 * Auto Gain supported is -
760 * 0 - 1 (Default - 1)
762 err
= v4l2_ctrl_query_fill(qctrl
, 0, 1, 1, 1);
765 v4l2_err(sd
, "invalid control id %d\n", qctrl
->id
);
769 v4l2_dbg(1, debug
, sd
, "Query Control:%s: Min - %d, Max - %d, Def - %d\n",
770 qctrl
->name
, qctrl
->minimum
, qctrl
->maximum
,
771 qctrl
->default_value
);
777 * tvp514x_g_ctrl() - V4L2 decoder interface handler for g_ctrl
778 * @sd: pointer to standard V4L2 sub-device structure
779 * @ctrl: pointer to v4l2_control structure
781 * If the requested control is supported, returns the control's current
782 * value from the decoder. Otherwise, returns -EINVAL if the control is not
786 tvp514x_g_ctrl(struct v4l2_subdev
*sd
, struct v4l2_control
*ctrl
)
788 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
794 case V4L2_CID_BRIGHTNESS
:
795 ctrl
->value
= decoder
->tvp514x_regs
[REG_BRIGHTNESS
].val
;
797 case V4L2_CID_CONTRAST
:
798 ctrl
->value
= decoder
->tvp514x_regs
[REG_CONTRAST
].val
;
800 case V4L2_CID_SATURATION
:
801 ctrl
->value
= decoder
->tvp514x_regs
[REG_SATURATION
].val
;
804 ctrl
->value
= decoder
->tvp514x_regs
[REG_HUE
].val
;
805 if (ctrl
->value
== 0x7F)
807 else if (ctrl
->value
== 0x80)
813 case V4L2_CID_AUTOGAIN
:
814 ctrl
->value
= decoder
->tvp514x_regs
[REG_AFE_GAIN_CTRL
].val
;
815 if ((ctrl
->value
& 0x3) == 3)
822 v4l2_err(sd
, "invalid control id %d\n", ctrl
->id
);
826 v4l2_dbg(1, debug
, sd
, "Get Control: ID - %d - %d\n",
827 ctrl
->id
, ctrl
->value
);
832 * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl
833 * @sd: pointer to standard V4L2 sub-device structure
834 * @ctrl: pointer to v4l2_control structure
836 * If the requested control is supported, sets the control's current
837 * value in HW. Otherwise, returns -EINVAL if the control is not supported.
840 tvp514x_s_ctrl(struct v4l2_subdev
*sd
, struct v4l2_control
*ctrl
)
842 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
843 int err
= -EINVAL
, value
;
851 case V4L2_CID_BRIGHTNESS
:
852 if (ctrl
->value
< 0 || ctrl
->value
> 255) {
853 v4l2_err(sd
, "invalid brightness setting %d\n",
857 err
= tvp514x_write_reg(sd
, REG_BRIGHTNESS
,
862 decoder
->tvp514x_regs
[REG_BRIGHTNESS
].val
= value
;
864 case V4L2_CID_CONTRAST
:
865 if (ctrl
->value
< 0 || ctrl
->value
> 255) {
866 v4l2_err(sd
, "invalid contrast setting %d\n",
870 err
= tvp514x_write_reg(sd
, REG_CONTRAST
, value
);
874 decoder
->tvp514x_regs
[REG_CONTRAST
].val
= value
;
876 case V4L2_CID_SATURATION
:
877 if (ctrl
->value
< 0 || ctrl
->value
> 255) {
878 v4l2_err(sd
, "invalid saturation setting %d\n",
882 err
= tvp514x_write_reg(sd
, REG_SATURATION
, value
);
886 decoder
->tvp514x_regs
[REG_SATURATION
].val
= value
;
891 else if (value
== -180)
896 v4l2_err(sd
, "invalid hue setting %d\n", ctrl
->value
);
899 err
= tvp514x_write_reg(sd
, REG_HUE
, value
);
903 decoder
->tvp514x_regs
[REG_HUE
].val
= value
;
905 case V4L2_CID_AUTOGAIN
:
911 v4l2_err(sd
, "invalid auto gain setting %d\n",
915 err
= tvp514x_write_reg(sd
, REG_AFE_GAIN_CTRL
, value
);
919 decoder
->tvp514x_regs
[REG_AFE_GAIN_CTRL
].val
= value
;
922 v4l2_err(sd
, "invalid control id %d\n", ctrl
->id
);
926 v4l2_dbg(1, debug
, sd
, "Set Control: ID - %d - %d\n",
927 ctrl
->id
, ctrl
->value
);
933 * tvp514x_enum_mbus_fmt() - V4L2 decoder interface handler for enum_mbus_fmt
934 * @sd: pointer to standard V4L2 sub-device structure
935 * @index: index of pixelcode to retrieve
936 * @code: receives the pixelcode
938 * Enumerates supported mediabus formats
941 tvp514x_enum_mbus_fmt(struct v4l2_subdev
*sd
, unsigned index
,
942 enum v4l2_mbus_pixelcode
*code
)
947 *code
= V4L2_MBUS_FMT_YUYV10_2X10
;
952 * tvp514x_mbus_fmt_cap() - V4L2 decoder interface handler for try/s/g_mbus_fmt
953 * @sd: pointer to standard V4L2 sub-device structure
954 * @f: pointer to the mediabus format structure
956 * Negotiates the image capture size and mediabus format.
959 tvp514x_mbus_fmt(struct v4l2_subdev
*sd
, struct v4l2_mbus_framefmt
*f
)
961 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
962 enum tvp514x_std current_std
;
967 /* Calculate height and width based on current standard */
968 current_std
= decoder
->current_std
;
970 f
->code
= V4L2_MBUS_FMT_YUYV10_2X10
;
971 f
->width
= decoder
->std_list
[current_std
].width
;
972 f
->height
= decoder
->std_list
[current_std
].height
;
973 f
->field
= V4L2_FIELD_INTERLACED
;
974 f
->colorspace
= V4L2_COLORSPACE_SMPTE170M
;
976 v4l2_dbg(1, debug
, sd
, "MBUS_FMT: Width - %d, Height - %d\n",
977 f
->width
, f
->height
);
982 * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm
983 * @sd: pointer to standard V4L2 sub-device structure
984 * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
986 * Returns the decoder's video CAPTURE parameters.
989 tvp514x_g_parm(struct v4l2_subdev
*sd
, struct v4l2_streamparm
*a
)
991 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
992 struct v4l2_captureparm
*cparm
;
993 enum tvp514x_std current_std
;
998 if (a
->type
!= V4L2_BUF_TYPE_VIDEO_CAPTURE
)
999 /* only capture is supported */
1002 /* get the current standard */
1003 current_std
= decoder
->current_std
;
1005 cparm
= &a
->parm
.capture
;
1006 cparm
->capability
= V4L2_CAP_TIMEPERFRAME
;
1007 cparm
->timeperframe
=
1008 decoder
->std_list
[current_std
].standard
.frameperiod
;
1014 * tvp514x_s_parm() - V4L2 decoder interface handler for s_parm
1015 * @sd: pointer to standard V4L2 sub-device structure
1016 * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
1018 * Configures the decoder to use the input parameters, if possible. If
1019 * not possible, returns the appropriate error code.
1022 tvp514x_s_parm(struct v4l2_subdev
*sd
, struct v4l2_streamparm
*a
)
1024 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
1025 struct v4l2_fract
*timeperframe
;
1026 enum tvp514x_std current_std
;
1031 if (a
->type
!= V4L2_BUF_TYPE_VIDEO_CAPTURE
)
1032 /* only capture is supported */
1035 timeperframe
= &a
->parm
.capture
.timeperframe
;
1037 /* get the current standard */
1038 current_std
= decoder
->current_std
;
1041 decoder
->std_list
[current_std
].standard
.frameperiod
;
1047 * tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream
1048 * @sd: pointer to standard V4L2 sub-device structure
1049 * @enable: streaming enable or disable
1051 * Sets streaming to enable or disable, if possible.
1053 static int tvp514x_s_stream(struct v4l2_subdev
*sd
, int enable
)
1056 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
1057 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
1059 if (decoder
->streaming
== enable
)
1065 /* Power Down Sequence */
1066 err
= tvp514x_write_reg(sd
, REG_OPERATION_MODE
, 0x01);
1068 v4l2_err(sd
, "Unable to turn off decoder\n");
1071 decoder
->streaming
= enable
;
1076 struct tvp514x_reg
*int_seq
= (struct tvp514x_reg
*)
1077 client
->driver
->id_table
->driver_data
;
1079 /* Power Up Sequence */
1080 err
= tvp514x_write_regs(sd
, int_seq
);
1082 v4l2_err(sd
, "Unable to turn on decoder\n");
1085 /* Detect if not already detected */
1086 err
= tvp514x_detect(sd
, decoder
);
1088 v4l2_err(sd
, "Unable to detect decoder\n");
1091 err
= tvp514x_configure(sd
, decoder
);
1093 v4l2_err(sd
, "Unable to configure decoder\n");
1096 decoder
->streaming
= enable
;
1107 static const struct v4l2_subdev_core_ops tvp514x_core_ops
= {
1108 .queryctrl
= tvp514x_queryctrl
,
1109 .g_ctrl
= tvp514x_g_ctrl
,
1110 .s_ctrl
= tvp514x_s_ctrl
,
1111 .s_std
= tvp514x_s_std
,
1114 static const struct v4l2_subdev_video_ops tvp514x_video_ops
= {
1115 .s_routing
= tvp514x_s_routing
,
1116 .querystd
= tvp514x_querystd
,
1117 .enum_mbus_fmt
= tvp514x_enum_mbus_fmt
,
1118 .g_mbus_fmt
= tvp514x_mbus_fmt
,
1119 .try_mbus_fmt
= tvp514x_mbus_fmt
,
1120 .s_mbus_fmt
= tvp514x_mbus_fmt
,
1121 .g_parm
= tvp514x_g_parm
,
1122 .s_parm
= tvp514x_s_parm
,
1123 .s_stream
= tvp514x_s_stream
,
1126 static const struct v4l2_subdev_ops tvp514x_ops
= {
1127 .core
= &tvp514x_core_ops
,
1128 .video
= &tvp514x_video_ops
,
1131 static struct tvp514x_decoder tvp514x_dev
= {
1133 .current_std
= STD_NTSC_MJ
,
1134 .std_list
= tvp514x_std_list
,
1135 .num_stds
= ARRAY_SIZE(tvp514x_std_list
),
1140 * tvp514x_probe() - decoder driver i2c probe handler
1141 * @client: i2c driver client device structure
1142 * @id: i2c driver id table
1144 * Register decoder as an i2c client device and V4L2
1148 tvp514x_probe(struct i2c_client
*client
, const struct i2c_device_id
*id
)
1150 struct tvp514x_decoder
*decoder
;
1151 struct v4l2_subdev
*sd
;
1153 /* Check if the adapter supports the needed features */
1154 if (!i2c_check_functionality(client
->adapter
, I2C_FUNC_SMBUS_BYTE_DATA
))
1157 if (!client
->dev
.platform_data
) {
1158 v4l2_err(client
, "No platform data!!\n");
1162 decoder
= kzalloc(sizeof(*decoder
), GFP_KERNEL
);
1166 /* Initialize the tvp514x_decoder with default configuration */
1167 *decoder
= tvp514x_dev
;
1168 /* Copy default register configuration */
1169 memcpy(decoder
->tvp514x_regs
, tvp514x_reg_list_default
,
1170 sizeof(tvp514x_reg_list_default
));
1172 /* Copy board specific information here */
1173 decoder
->pdata
= client
->dev
.platform_data
;
1176 * Fetch platform specific data, and configure the
1177 * tvp514x_reg_list[] accordingly. Since this is one
1178 * time configuration, no need to preserve.
1180 decoder
->tvp514x_regs
[REG_OUTPUT_FORMATTER2
].val
|=
1181 (decoder
->pdata
->clk_polarity
<< 1);
1182 decoder
->tvp514x_regs
[REG_SYNC_CONTROL
].val
|=
1183 ((decoder
->pdata
->hs_polarity
<< 2) |
1184 (decoder
->pdata
->vs_polarity
<< 3));
1185 /* Set default standard to auto */
1186 decoder
->tvp514x_regs
[REG_VIDEO_STD
].val
=
1187 VIDEO_STD_AUTO_SWITCH_BIT
;
1189 /* Register with V4L2 layer as slave device */
1191 v4l2_i2c_subdev_init(sd
, client
, &tvp514x_ops
);
1193 v4l2_info(sd
, "%s decoder driver registered !!\n", sd
->name
);
1200 * tvp514x_remove() - decoder driver i2c remove handler
1201 * @client: i2c driver client device structure
1203 * Unregister decoder as an i2c client device and V4L2
1204 * device. Complement of tvp514x_probe().
1206 static int tvp514x_remove(struct i2c_client
*client
)
1208 struct v4l2_subdev
*sd
= i2c_get_clientdata(client
);
1209 struct tvp514x_decoder
*decoder
= to_decoder(sd
);
1211 v4l2_device_unregister_subdev(sd
);
1215 /* TVP5146 Init/Power on Sequence */
1216 static const struct tvp514x_reg tvp5146_init_reg_seq
[] = {
1217 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS1
, 0x02},
1218 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS2
, 0x00},
1219 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS3
, 0x80},
1220 {TOK_WRITE
, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR
, 0x01},
1221 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS1
, 0x60},
1222 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS2
, 0x00},
1223 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS3
, 0xB0},
1224 {TOK_WRITE
, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR
, 0x01},
1225 {TOK_WRITE
, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR
, 0x00},
1226 {TOK_WRITE
, REG_OPERATION_MODE
, 0x01},
1227 {TOK_WRITE
, REG_OPERATION_MODE
, 0x00},
1231 /* TVP5147 Init/Power on Sequence */
1232 static const struct tvp514x_reg tvp5147_init_reg_seq
[] = {
1233 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS1
, 0x02},
1234 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS2
, 0x00},
1235 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS3
, 0x80},
1236 {TOK_WRITE
, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR
, 0x01},
1237 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS1
, 0x60},
1238 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS2
, 0x00},
1239 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS3
, 0xB0},
1240 {TOK_WRITE
, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR
, 0x01},
1241 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS1
, 0x16},
1242 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS2
, 0x00},
1243 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS3
, 0xA0},
1244 {TOK_WRITE
, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR
, 0x16},
1245 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS1
, 0x60},
1246 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS2
, 0x00},
1247 {TOK_WRITE
, REG_VBUS_ADDRESS_ACCESS3
, 0xB0},
1248 {TOK_WRITE
, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR
, 0x00},
1249 {TOK_WRITE
, REG_OPERATION_MODE
, 0x01},
1250 {TOK_WRITE
, REG_OPERATION_MODE
, 0x00},
1254 /* TVP5146M2/TVP5147M1 Init/Power on Sequence */
1255 static const struct tvp514x_reg tvp514xm_init_reg_seq
[] = {
1256 {TOK_WRITE
, REG_OPERATION_MODE
, 0x01},
1257 {TOK_WRITE
, REG_OPERATION_MODE
, 0x00},
1262 * I2C Device Table -
1264 * name - Name of the actual device/chip.
1265 * driver_data - Driver data
1267 static const struct i2c_device_id tvp514x_id
[] = {
1268 {"tvp5146", (unsigned long)tvp5146_init_reg_seq
},
1269 {"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq
},
1270 {"tvp5147", (unsigned long)tvp5147_init_reg_seq
},
1271 {"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq
},
1275 MODULE_DEVICE_TABLE(i2c
, tvp514x_id
);
1277 static struct i2c_driver tvp514x_driver
= {
1279 .owner
= THIS_MODULE
,
1280 .name
= TVP514X_MODULE_NAME
,
1282 .probe
= tvp514x_probe
,
1283 .remove
= tvp514x_remove
,
1284 .id_table
= tvp514x_id
,
1287 static int __init
tvp514x_init(void)
1289 return i2c_add_driver(&tvp514x_driver
);
1292 static void __exit
tvp514x_exit(void)
1294 i2c_del_driver(&tvp514x_driver
);
1297 module_init(tvp514x_init
);
1298 module_exit(tvp514x_exit
);