gma500: begin the config based split
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / staging / rtl8192e / r8192E_dm.h
blobb5b34eaaee93f3021abf896b0c7e9fed98dd09e9
1 /*****************************************************************************
2 * Copyright(c) 2007, RealTEK Technology Inc. All Right Reserved.
4 * Module: Hal819xUsbDM.h (RTL8192 Header H File)
7 * Note: For dynamic control definition constant structure.
10 * Export:
12 * Abbrev:
14 * History:
15 * Data Who Remark
16 * 10/04/2007 MHC Create initial version.
18 *****************************************************************************/
20 #ifndef __R8192UDM_H__
21 #define __R8192UDM_H__
23 #define OFDM_Table_Length 19
24 #define CCK_Table_length 12
26 #define DM_DIG_THRESH_HIGH 40
27 #define DM_DIG_THRESH_LOW 35
29 #define DM_DIG_HIGH_PWR_THRESH_HIGH 75
30 #define DM_DIG_HIGH_PWR_THRESH_LOW 70
32 #define BW_AUTO_SWITCH_HIGH_LOW 25
33 #define BW_AUTO_SWITCH_LOW_HIGH 30
35 #define DM_check_fsync_time_interval 500
38 #define DM_DIG_BACKOFF 12
39 #define DM_DIG_MAX 0x36
40 #define DM_DIG_MIN 0x1c
41 #define DM_DIG_MIN_Netcore 0x12
43 #define RxPathSelection_SS_TH_low 30
44 #define RxPathSelection_diff_TH 18
46 #define RateAdaptiveTH_High 50
47 #define RateAdaptiveTH_Low_20M 30
48 #define RateAdaptiveTH_Low_40M 10
49 #define VeryLowRSSI 15
50 #define CTSToSelfTHVal 35
52 //defined by vivi, for tx power track
53 #define E_FOR_TX_POWER_TRACK 300
54 //Dynamic Tx Power Control Threshold
55 #define TX_POWER_NEAR_FIELD_THRESH_HIGH 68
56 #define TX_POWER_NEAR_FIELD_THRESH_LOW 62
57 //added by amy for atheros AP
58 #define TX_POWER_ATHEROAP_THRESH_HIGH 78
59 #define TX_POWER_ATHEROAP_THRESH_LOW 72
61 //defined by vivi, for showing on UI. Newer firmware has changed to 0x1e0
62 #define Current_Tx_Rate_Reg 0x1e0//0x1b8
63 #define Initial_Tx_Rate_Reg 0x1e1 //0x1b9
64 #define Tx_Retry_Count_Reg 0x1ac
65 #define RegC38_TH 20
67 /* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */
68 typedef struct _dynamic_initial_gain_threshold_
70 u8 dig_enable_flag;
71 u8 dig_algorithm;
72 u8 dbg_mode;
73 u8 dig_algorithm_switch;
75 long rssi_low_thresh;
76 long rssi_high_thresh;
78 long rssi_high_power_lowthresh;
79 long rssi_high_power_highthresh;
81 u8 dig_state;
82 u8 dig_highpwr_state;
83 u8 cur_connect_state;
84 u8 pre_connect_state;
86 u8 curpd_thstate;
87 u8 prepd_thstate;
88 u8 curcs_ratio_state;
89 u8 precs_ratio_state;
91 u32 pre_ig_value;
92 u32 cur_ig_value;
94 u8 backoff_val;
95 u8 rx_gain_range_max;
96 u8 rx_gain_range_min;
97 bool initialgain_lowerbound_state;
99 long rssi_val;
100 }dig_t;
102 typedef enum tag_dynamic_init_gain_state_definition
104 DM_STA_DIG_OFF = 0,
105 DM_STA_DIG_ON,
106 DM_STA_DIG_MAX
107 }dm_dig_sta_e;
110 /* 2007/10/08 MH Define RATR state. */
111 typedef enum tag_dynamic_ratr_state_definition
113 DM_RATR_STA_HIGH = 0,
114 DM_RATR_STA_MIDDLE = 1,
115 DM_RATR_STA_LOW = 2,
116 DM_RATR_STA_MAX
117 }dm_ratr_sta_e;
119 /* 2007/10/11 MH Define DIG operation type. */
120 typedef enum tag_dynamic_init_gain_operation_type_definition
122 DIG_TYPE_THRESH_HIGH = 0,
123 DIG_TYPE_THRESH_LOW = 1,
124 DIG_TYPE_THRESH_HIGHPWR_HIGH = 2,
125 DIG_TYPE_THRESH_HIGHPWR_LOW = 3,
126 DIG_TYPE_DBG_MODE = 4,
127 DIG_TYPE_RSSI = 5,
128 DIG_TYPE_ALGORITHM = 6,
129 DIG_TYPE_BACKOFF = 7,
130 DIG_TYPE_PWDB_FACTOR = 8,
131 DIG_TYPE_RX_GAIN_MIN = 9,
132 DIG_TYPE_RX_GAIN_MAX = 10,
133 DIG_TYPE_ENABLE = 20,
134 DIG_TYPE_DISABLE = 30,
135 DIG_OP_TYPE_MAX
136 }dm_dig_op_e;
138 typedef enum tag_dig_algorithm_definition
140 DIG_ALGO_BY_FALSE_ALARM = 0,
141 DIG_ALGO_BY_RSSI = 1,
142 DIG_ALGO_MAX
143 }dm_dig_alg_e;
145 typedef enum tag_dig_dbgmode_definition
147 DIG_DBG_OFF = 0,
148 DIG_DBG_ON = 1,
149 DIG_DBG_MAX
150 }dm_dig_dbg_e;
152 typedef enum tag_dig_connect_definition
154 DIG_DISCONNECT = 0,
155 DIG_CONNECT = 1,
156 DIG_CONNECT_MAX
157 }dm_dig_connect_e;
159 typedef enum tag_dig_packetdetection_threshold_definition
161 DIG_PD_AT_LOW_POWER = 0,
162 DIG_PD_AT_NORMAL_POWER = 1,
163 DIG_PD_AT_HIGH_POWER = 2,
164 DIG_PD_MAX
165 }dm_dig_pd_th_e;
167 typedef enum tag_dig_cck_cs_ratio_state_definition
169 DIG_CS_RATIO_LOWER = 0,
170 DIG_CS_RATIO_HIGHER = 1,
171 DIG_CS_MAX
172 }dm_dig_cs_ratio_e;
173 typedef struct _Dynamic_Rx_Path_Selection_
175 u8 Enable;
176 u8 DbgMode;
177 u8 cck_method;
178 u8 cck_Rx_path;
180 u8 SS_TH_low;
181 u8 diff_TH;
182 u8 disabledRF;
183 u8 reserved;
185 u8 rf_rssi[4];
186 u8 rf_enable_rssi_th[4];
187 long cck_pwdb_sta[4];
188 }DRxPathSel;
190 typedef enum tag_CCK_Rx_Path_Method_Definition
192 CCK_Rx_Version_1 = 0,
193 CCK_Rx_Version_2= 1,
194 CCK_Rx_Version_MAX
195 }DM_CCK_Rx_Path_Method;
197 typedef enum tag_DM_DbgMode_Definition
199 DM_DBG_OFF = 0,
200 DM_DBG_ON = 1,
201 DM_DBG_MAX
202 }DM_DBG_E;
204 typedef struct tag_Tx_Config_Cmd_Format
206 u32 Op; /* Command packet type. */
207 u32 Length; /* Command packet length. */
208 u32 Value;
209 }DCMD_TXCMD_T, *PDCMD_TXCMD_T;
212 extern dig_t dm_digtable;
213 extern DRxPathSel DM_RxPathSelTable;
215 void init_hal_dm(struct r8192_priv *priv);
216 void deinit_hal_dm(struct r8192_priv *priv);
218 void hal_dm_watchdog(struct r8192_priv *priv);
220 void init_rate_adaptive(struct r8192_priv *priv);
221 void dm_txpower_trackingcallback(struct work_struct *work);
222 void dm_rf_pathcheck_workitemcallback(struct work_struct *work);
223 void dm_initialize_txpower_tracking(struct r8192_priv *priv);
224 void dm_cck_txpower_adjust(struct r8192_priv *priv, bool binch14);
227 #endif /*__R8192UDM_H__ */