[SPARC64]: Kill pbm->pci_first_slot.
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / include / asm-m68knommu / m520xsim.h
blob49d016e6391a3417289bca0b79d1380e66e0ac76
1 /****************************************************************************/
3 /*
4 * m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
6 * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
7 */
9 /****************************************************************************/
10 #ifndef m520xsim_h
11 #define m520xsim_h
12 /****************************************************************************/
16 * Define the 5282 SIM register set addresses.
18 #define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */
19 #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
20 #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
21 #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
22 #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
23 #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
24 #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
25 #define MCFINTC_ICR0 0x40 /* Base ICR register */
27 #define MCFINT_VECBASE 64
28 #define MCFINT_UART0 26 /* Interrupt number for UART0 */
29 #define MCFINT_UART1 27 /* Interrupt number for UART1 */
30 #define MCFINT_UART2 28 /* Interrupt number for UART2 */
31 #define MCFINT_QSPI 31 /* Interrupt number for QSPI */
32 #define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
35 * SDRAM configuration registers.
37 #define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */
38 #define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */
39 #define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */
40 #define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */
41 #define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
42 #define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
45 #define MCF_GPIO_PAR_UART (0xA4036)
46 #define MCF_GPIO_PAR_FECI2C (0xA4033)
47 #define MCF_GPIO_PAR_FEC (0xA4038)
49 #define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
50 #define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002)
52 #define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040)
53 #define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080)
55 #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
56 #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
58 #define ICR_INTRCONF 0x05
59 #define MCFPIT_IMR MCFINTC_IMRL
60 #define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
62 /****************************************************************************/
63 #endif /* m520xsim_h */