3 * TI 3410/5052 USB Serial Driver
5 * Copyright (C) 2004 Texas Instruments
7 * This driver is based on the Linux io_ti driver, which is
8 * Copyright (C) 2000-2002 Inside Out Networks
9 * Copyright (C) 2001-2002 Greg Kroah-Hartman
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * For questions or problems with this driver, contact Texas Instruments
17 * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
18 * Peter Berger <pberger@brimson.com>.
20 * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
21 * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
29 * if [[ "$ACTION" != "add" ]]
34 * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
36 * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
41 * PRODUCT=${PRODUCT%/?*} # delete version
42 * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
43 * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
45 * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
62 * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
63 * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
64 * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
65 * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
67 * echo $ACTIVE_CONFIG > $CONFIG_PATH
71 #include <linux/kernel.h>
72 #include <linux/errno.h>
73 #include <linux/init.h>
74 #include <linux/slab.h>
75 #include <linux/tty.h>
76 #include <linux/tty_driver.h>
77 #include <linux/tty_flip.h>
78 #include <linux/module.h>
79 #include <linux/spinlock.h>
80 #include <linux/ioctl.h>
81 #include <linux/serial.h>
82 #include <linux/circ_buf.h>
83 #include <linux/mutex.h>
84 #include <asm/uaccess.h>
85 #include <linux/usb.h>
86 #include <linux/usb/serial.h>
88 #include "ti_usb_3410_5052.h"
89 #include "ti_fw_3410.h" /* firmware image for 3410 */
90 #include "ti_fw_5052.h" /* firmware image for 5052 */
95 #define TI_DRIVER_VERSION "v0.9"
96 #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>"
97 #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver"
99 #define TI_FIRMWARE_BUF_SIZE 16284
101 #define TI_WRITE_BUF_SIZE 1024
103 #define TI_TRANSFER_TIMEOUT 2
105 #define TI_DEFAULT_LOW_LATENCY 0
106 #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
108 /* supported setserial flags */
109 #define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY)
111 /* read urb states */
112 #define TI_READ_URB_RUNNING 0
113 #define TI_READ_URB_STOPPING 1
114 #define TI_READ_URB_STOPPED 2
116 #define TI_EXTRA_VID_PID_COUNT 5
126 __u8 tp_uart_mode
; /* 232 or 485 modes */
127 unsigned int tp_uart_base_addr
;
129 int tp_closing_wait
;/* in .01 secs */
130 struct async_icount tp_icount
;
131 wait_queue_head_t tp_msr_wait
; /* wait for msr change */
132 wait_queue_head_t tp_write_wait
;
133 struct ti_device
*tp_tdev
;
134 struct usb_serial_port
*tp_port
;
136 int tp_read_urb_state
;
137 int tp_write_urb_in_use
;
138 struct circ_buf
*tp_write_buf
;
142 struct mutex td_open_close_lock
;
143 int td_open_port_count
;
144 struct usb_serial
*td_serial
;
150 /* Function Declarations */
152 static int ti_startup(struct usb_serial
*serial
);
153 static void ti_shutdown(struct usb_serial
*serial
);
154 static int ti_open(struct usb_serial_port
*port
, struct file
*file
);
155 static void ti_close(struct usb_serial_port
*port
, struct file
*file
);
156 static int ti_write(struct usb_serial_port
*port
, const unsigned char *data
,
158 static int ti_write_room(struct usb_serial_port
*port
);
159 static int ti_chars_in_buffer(struct usb_serial_port
*port
);
160 static void ti_throttle(struct usb_serial_port
*port
);
161 static void ti_unthrottle(struct usb_serial_port
*port
);
162 static int ti_ioctl(struct usb_serial_port
*port
, struct file
*file
, unsigned int cmd
, unsigned long arg
);
163 static void ti_set_termios(struct usb_serial_port
*port
,
164 struct ktermios
*old_termios
);
165 static int ti_tiocmget(struct usb_serial_port
*port
, struct file
*file
);
166 static int ti_tiocmset(struct usb_serial_port
*port
, struct file
*file
,
167 unsigned int set
, unsigned int clear
);
168 static void ti_break(struct usb_serial_port
*port
, int break_state
);
169 static void ti_interrupt_callback(struct urb
*urb
);
170 static void ti_bulk_in_callback(struct urb
*urb
);
171 static void ti_bulk_out_callback(struct urb
*urb
);
173 static void ti_recv(struct device
*dev
, struct tty_struct
*tty
,
174 unsigned char *data
, int length
);
175 static void ti_send(struct ti_port
*tport
);
176 static int ti_set_mcr(struct ti_port
*tport
, unsigned int mcr
);
177 static int ti_get_lsr(struct ti_port
*tport
);
178 static int ti_get_serial_info(struct ti_port
*tport
,
179 struct serial_struct __user
*ret_arg
);
180 static int ti_set_serial_info(struct ti_port
*tport
,
181 struct serial_struct __user
*new_arg
);
182 static void ti_handle_new_msr(struct ti_port
*tport
, __u8 msr
);
184 static void ti_drain(struct ti_port
*tport
, unsigned long timeout
, int flush
);
186 static void ti_stop_read(struct ti_port
*tport
, struct tty_struct
*tty
);
187 static int ti_restart_read(struct ti_port
*tport
, struct tty_struct
*tty
);
189 static int ti_command_out_sync(struct ti_device
*tdev
, __u8 command
,
190 __u16 moduleid
, __u16 value
, __u8
*data
, int size
);
191 static int ti_command_in_sync(struct ti_device
*tdev
, __u8 command
,
192 __u16 moduleid
, __u16 value
, __u8
*data
, int size
);
194 static int ti_write_byte(struct ti_device
*tdev
, unsigned long addr
,
195 __u8 mask
, __u8 byte
);
197 static int ti_download_firmware(struct ti_device
*tdev
,
198 unsigned char *firmware
, unsigned int firmware_size
);
200 /* circular buffer */
201 static struct circ_buf
*ti_buf_alloc(void);
202 static void ti_buf_free(struct circ_buf
*cb
);
203 static void ti_buf_clear(struct circ_buf
*cb
);
204 static int ti_buf_data_avail(struct circ_buf
*cb
);
205 static int ti_buf_space_avail(struct circ_buf
*cb
);
206 static int ti_buf_put(struct circ_buf
*cb
, const char *buf
, int count
);
207 static int ti_buf_get(struct circ_buf
*cb
, char *buf
, int count
);
212 /* module parameters */
214 static int low_latency
= TI_DEFAULT_LOW_LATENCY
;
215 static int closing_wait
= TI_DEFAULT_CLOSING_WAIT
;
216 static ushort vendor_3410
[TI_EXTRA_VID_PID_COUNT
];
217 static unsigned int vendor_3410_count
;
218 static ushort product_3410
[TI_EXTRA_VID_PID_COUNT
];
219 static unsigned int product_3410_count
;
220 static ushort vendor_5052
[TI_EXTRA_VID_PID_COUNT
];
221 static unsigned int vendor_5052_count
;
222 static ushort product_5052
[TI_EXTRA_VID_PID_COUNT
];
223 static unsigned int product_5052_count
;
225 /* supported devices */
226 /* the array dimension is the number of default entries plus */
227 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
229 static struct usb_device_id ti_id_table_3410
[1+TI_EXTRA_VID_PID_COUNT
+1] = {
230 { USB_DEVICE(TI_VENDOR_ID
, TI_3410_PRODUCT_ID
) },
231 { USB_DEVICE(TI_VENDOR_ID
, TI_3410_EZ430_ID
) },
234 static struct usb_device_id ti_id_table_5052
[4+TI_EXTRA_VID_PID_COUNT
+1] = {
235 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_BOOT_PRODUCT_ID
) },
236 { USB_DEVICE(TI_VENDOR_ID
, TI_5152_BOOT_PRODUCT_ID
) },
237 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_EEPROM_PRODUCT_ID
) },
238 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_FIRMWARE_PRODUCT_ID
) },
241 static struct usb_device_id ti_id_table_combined
[] = {
242 { USB_DEVICE(TI_VENDOR_ID
, TI_3410_PRODUCT_ID
) },
243 { USB_DEVICE(TI_VENDOR_ID
, TI_3410_EZ430_ID
) },
244 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_BOOT_PRODUCT_ID
) },
245 { USB_DEVICE(TI_VENDOR_ID
, TI_5152_BOOT_PRODUCT_ID
) },
246 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_EEPROM_PRODUCT_ID
) },
247 { USB_DEVICE(TI_VENDOR_ID
, TI_5052_FIRMWARE_PRODUCT_ID
) },
251 static struct usb_driver ti_usb_driver
= {
252 .name
= "ti_usb_3410_5052",
253 .probe
= usb_serial_probe
,
254 .disconnect
= usb_serial_disconnect
,
255 .id_table
= ti_id_table_combined
,
259 static struct usb_serial_driver ti_1port_device
= {
261 .owner
= THIS_MODULE
,
262 .name
= "ti_usb_3410_5052_1",
264 .description
= "TI USB 3410 1 port adapter",
265 .usb_driver
= &ti_usb_driver
,
266 .id_table
= ti_id_table_3410
,
268 .attach
= ti_startup
,
269 .shutdown
= ti_shutdown
,
273 .write_room
= ti_write_room
,
274 .chars_in_buffer
= ti_chars_in_buffer
,
275 .throttle
= ti_throttle
,
276 .unthrottle
= ti_unthrottle
,
278 .set_termios
= ti_set_termios
,
279 .tiocmget
= ti_tiocmget
,
280 .tiocmset
= ti_tiocmset
,
281 .break_ctl
= ti_break
,
282 .read_int_callback
= ti_interrupt_callback
,
283 .read_bulk_callback
= ti_bulk_in_callback
,
284 .write_bulk_callback
= ti_bulk_out_callback
,
287 static struct usb_serial_driver ti_2port_device
= {
289 .owner
= THIS_MODULE
,
290 .name
= "ti_usb_3410_5052_2",
292 .description
= "TI USB 5052 2 port adapter",
293 .usb_driver
= &ti_usb_driver
,
294 .id_table
= ti_id_table_5052
,
296 .attach
= ti_startup
,
297 .shutdown
= ti_shutdown
,
301 .write_room
= ti_write_room
,
302 .chars_in_buffer
= ti_chars_in_buffer
,
303 .throttle
= ti_throttle
,
304 .unthrottle
= ti_unthrottle
,
306 .set_termios
= ti_set_termios
,
307 .tiocmget
= ti_tiocmget
,
308 .tiocmset
= ti_tiocmset
,
309 .break_ctl
= ti_break
,
310 .read_int_callback
= ti_interrupt_callback
,
311 .read_bulk_callback
= ti_bulk_in_callback
,
312 .write_bulk_callback
= ti_bulk_out_callback
,
318 MODULE_AUTHOR(TI_DRIVER_AUTHOR
);
319 MODULE_DESCRIPTION(TI_DRIVER_DESC
);
320 MODULE_VERSION(TI_DRIVER_VERSION
);
321 MODULE_LICENSE("GPL");
323 module_param(debug
, bool, S_IRUGO
| S_IWUSR
);
324 MODULE_PARM_DESC(debug
, "Enable debugging, 0=no, 1=yes");
326 module_param(low_latency
, bool, S_IRUGO
| S_IWUSR
);
327 MODULE_PARM_DESC(low_latency
, "TTY low_latency flag, 0=off, 1=on, default is off");
329 module_param(closing_wait
, int, S_IRUGO
| S_IWUSR
);
330 MODULE_PARM_DESC(closing_wait
, "Maximum wait for data to drain in close, in .01 secs, default is 4000");
332 module_param_array(vendor_3410
, ushort
, &vendor_3410_count
, S_IRUGO
);
333 MODULE_PARM_DESC(vendor_3410
, "Vendor ids for 3410 based devices, 1-5 short integers");
334 module_param_array(product_3410
, ushort
, &product_3410_count
, S_IRUGO
);
335 MODULE_PARM_DESC(product_3410
, "Product ids for 3410 based devices, 1-5 short integers");
336 module_param_array(vendor_5052
, ushort
, &vendor_5052_count
, S_IRUGO
);
337 MODULE_PARM_DESC(vendor_5052
, "Vendor ids for 5052 based devices, 1-5 short integers");
338 module_param_array(product_5052
, ushort
, &product_5052_count
, S_IRUGO
);
339 MODULE_PARM_DESC(product_5052
, "Product ids for 5052 based devices, 1-5 short integers");
341 MODULE_DEVICE_TABLE(usb
, ti_id_table_combined
);
346 static int __init
ti_init(void)
351 /* insert extra vendor and product ids */
352 j
= ARRAY_SIZE(ti_id_table_3410
) - TI_EXTRA_VID_PID_COUNT
- 1;
353 for (i
=0; i
<min(vendor_3410_count
,product_3410_count
); i
++,j
++) {
354 ti_id_table_3410
[j
].idVendor
= vendor_3410
[i
];
355 ti_id_table_3410
[j
].idProduct
= product_3410
[i
];
356 ti_id_table_3410
[j
].match_flags
= USB_DEVICE_ID_MATCH_DEVICE
;
358 j
= ARRAY_SIZE(ti_id_table_5052
) - TI_EXTRA_VID_PID_COUNT
- 1;
359 for (i
=0; i
<min(vendor_5052_count
,product_5052_count
); i
++,j
++) {
360 ti_id_table_5052
[j
].idVendor
= vendor_5052
[i
];
361 ti_id_table_5052
[j
].idProduct
= product_5052
[i
];
362 ti_id_table_5052
[j
].match_flags
= USB_DEVICE_ID_MATCH_DEVICE
;
365 ret
= usb_serial_register(&ti_1port_device
);
368 ret
= usb_serial_register(&ti_2port_device
);
372 ret
= usb_register(&ti_usb_driver
);
376 info(TI_DRIVER_DESC
" " TI_DRIVER_VERSION
);
381 usb_serial_deregister(&ti_2port_device
);
383 usb_serial_deregister(&ti_1port_device
);
389 static void __exit
ti_exit(void)
391 usb_serial_deregister(&ti_1port_device
);
392 usb_serial_deregister(&ti_2port_device
);
393 usb_deregister(&ti_usb_driver
);
397 module_init(ti_init
);
398 module_exit(ti_exit
);
401 static int ti_startup(struct usb_serial
*serial
)
403 struct ti_device
*tdev
;
404 struct ti_port
*tport
;
405 struct usb_device
*dev
= serial
->dev
;
410 dbg("%s - product 0x%4X, num configurations %d, configuration value %d",
411 __FUNCTION__
, le16_to_cpu(dev
->descriptor
.idProduct
),
412 dev
->descriptor
.bNumConfigurations
,
413 dev
->actconfig
->desc
.bConfigurationValue
);
415 /* create device structure */
416 tdev
= kzalloc(sizeof(struct ti_device
), GFP_KERNEL
);
418 dev_err(&dev
->dev
, "%s - out of memory\n", __FUNCTION__
);
421 mutex_init(&tdev
->td_open_close_lock
);
422 tdev
->td_serial
= serial
;
423 usb_set_serial_data(serial
, tdev
);
425 /* determine device type */
426 if (usb_match_id(serial
->interface
, ti_id_table_3410
))
427 tdev
->td_is_3410
= 1;
428 dbg("%s - device type is %s", __FUNCTION__
, tdev
->td_is_3410
? "3410" : "5052");
430 /* if we have only 1 configuration, download firmware */
431 if (dev
->descriptor
.bNumConfigurations
== 1) {
433 if (tdev
->td_is_3410
)
434 status
= ti_download_firmware(tdev
, ti_fw_3410
,
437 status
= ti_download_firmware(tdev
, ti_fw_5052
,
442 /* 3410 must be reset, 5052 resets itself */
443 if (tdev
->td_is_3410
) {
444 msleep_interruptible(100);
445 usb_reset_device(dev
);
452 /* the second configuration must be set (in sysfs by hotplug script) */
453 if (dev
->actconfig
->desc
.bConfigurationValue
== TI_BOOT_CONFIG
) {
458 /* set up port structures */
459 for (i
= 0; i
< serial
->num_ports
; ++i
) {
460 tport
= kzalloc(sizeof(struct ti_port
), GFP_KERNEL
);
462 dev_err(&dev
->dev
, "%s - out of memory\n", __FUNCTION__
);
466 spin_lock_init(&tport
->tp_lock
);
467 tport
->tp_uart_base_addr
= (i
== 0 ? TI_UART1_BASE_ADDR
: TI_UART2_BASE_ADDR
);
468 tport
->tp_flags
= low_latency
? ASYNC_LOW_LATENCY
: 0;
469 tport
->tp_closing_wait
= closing_wait
;
470 init_waitqueue_head(&tport
->tp_msr_wait
);
471 init_waitqueue_head(&tport
->tp_write_wait
);
472 tport
->tp_write_buf
= ti_buf_alloc();
473 if (tport
->tp_write_buf
== NULL
) {
474 dev_err(&dev
->dev
, "%s - out of memory\n", __FUNCTION__
);
479 tport
->tp_port
= serial
->port
[i
];
480 tport
->tp_tdev
= tdev
;
481 usb_set_serial_port_data(serial
->port
[i
], tport
);
482 tport
->tp_uart_mode
= 0; /* default is RS232 */
488 for (--i
; i
>=0; --i
) {
489 tport
= usb_get_serial_port_data(serial
->port
[i
]);
490 ti_buf_free(tport
->tp_write_buf
);
492 usb_set_serial_port_data(serial
->port
[i
], NULL
);
496 usb_set_serial_data(serial
, NULL
);
501 static void ti_shutdown(struct usb_serial
*serial
)
504 struct ti_device
*tdev
= usb_get_serial_data(serial
);
505 struct ti_port
*tport
;
507 dbg("%s", __FUNCTION__
);
509 for (i
=0; i
< serial
->num_ports
; ++i
) {
510 tport
= usb_get_serial_port_data(serial
->port
[i
]);
512 ti_buf_free(tport
->tp_write_buf
);
514 usb_set_serial_port_data(serial
->port
[i
], NULL
);
519 usb_set_serial_data(serial
, NULL
);
523 static int ti_open(struct usb_serial_port
*port
, struct file
*file
)
525 struct ti_port
*tport
= usb_get_serial_port_data(port
);
526 struct ti_device
*tdev
;
527 struct usb_device
*dev
;
531 __u16 open_settings
= (__u8
)(TI_PIPE_MODE_CONTINOUS
|
532 TI_PIPE_TIMEOUT_ENABLE
|
533 (TI_TRANSFER_TIMEOUT
<< 2));
535 dbg("%s - port %d", __FUNCTION__
, port
->number
);
540 dev
= port
->serial
->dev
;
541 tdev
= tport
->tp_tdev
;
543 /* only one open on any port on a device at a time */
544 if (mutex_lock_interruptible(&tdev
->td_open_close_lock
))
548 port
->tty
->low_latency
=
549 (tport
->tp_flags
& ASYNC_LOW_LATENCY
) ? 1 : 0;
551 port_number
= port
->number
- port
->serial
->minor
;
553 memset(&(tport
->tp_icount
), 0x00, sizeof(tport
->tp_icount
));
556 tport
->tp_shadow_mcr
|= (TI_MCR_RTS
| TI_MCR_DTR
);
558 /* start interrupt urb the first time a port is opened on this device */
559 if (tdev
->td_open_port_count
== 0) {
560 dbg("%s - start interrupt in urb", __FUNCTION__
);
561 urb
= tdev
->td_serial
->port
[0]->interrupt_in_urb
;
563 dev_err(&port
->dev
, "%s - no interrupt urb\n", __FUNCTION__
);
567 urb
->complete
= ti_interrupt_callback
;
570 status
= usb_submit_urb(urb
, GFP_KERNEL
);
572 dev_err(&port
->dev
, "%s - submit interrupt urb failed, %d\n", __FUNCTION__
, status
);
577 ti_set_termios(port
, port
->tty
->termios
);
579 dbg("%s - sending TI_OPEN_PORT", __FUNCTION__
);
580 status
= ti_command_out_sync(tdev
, TI_OPEN_PORT
,
581 (__u8
)(TI_UART1_PORT
+ port_number
), open_settings
, NULL
, 0);
583 dev_err(&port
->dev
, "%s - cannot send open command, %d\n", __FUNCTION__
, status
);
587 dbg("%s - sending TI_START_PORT", __FUNCTION__
);
588 status
= ti_command_out_sync(tdev
, TI_START_PORT
,
589 (__u8
)(TI_UART1_PORT
+ port_number
), 0, NULL
, 0);
591 dev_err(&port
->dev
, "%s - cannot send start command, %d\n", __FUNCTION__
, status
);
595 dbg("%s - sending TI_PURGE_PORT", __FUNCTION__
);
596 status
= ti_command_out_sync(tdev
, TI_PURGE_PORT
,
597 (__u8
)(TI_UART1_PORT
+ port_number
), TI_PURGE_INPUT
, NULL
, 0);
599 dev_err(&port
->dev
, "%s - cannot clear input buffers, %d\n", __FUNCTION__
, status
);
602 status
= ti_command_out_sync(tdev
, TI_PURGE_PORT
,
603 (__u8
)(TI_UART1_PORT
+ port_number
), TI_PURGE_OUTPUT
, NULL
, 0);
605 dev_err(&port
->dev
, "%s - cannot clear output buffers, %d\n", __FUNCTION__
, status
);
609 /* reset the data toggle on the bulk endpoints to work around bug in
610 * host controllers where things get out of sync some times */
611 usb_clear_halt(dev
, port
->write_urb
->pipe
);
612 usb_clear_halt(dev
, port
->read_urb
->pipe
);
614 ti_set_termios(port
, port
->tty
->termios
);
616 dbg("%s - sending TI_OPEN_PORT (2)", __FUNCTION__
);
617 status
= ti_command_out_sync(tdev
, TI_OPEN_PORT
,
618 (__u8
)(TI_UART1_PORT
+ port_number
), open_settings
, NULL
, 0);
620 dev_err(&port
->dev
, "%s - cannot send open command (2), %d\n", __FUNCTION__
, status
);
624 dbg("%s - sending TI_START_PORT (2)", __FUNCTION__
);
625 status
= ti_command_out_sync(tdev
, TI_START_PORT
,
626 (__u8
)(TI_UART1_PORT
+ port_number
), 0, NULL
, 0);
628 dev_err(&port
->dev
, "%s - cannot send start command (2), %d\n", __FUNCTION__
, status
);
633 dbg("%s - start read urb", __FUNCTION__
);
634 urb
= port
->read_urb
;
636 dev_err(&port
->dev
, "%s - no read urb\n", __FUNCTION__
);
640 tport
->tp_read_urb_state
= TI_READ_URB_RUNNING
;
641 urb
->complete
= ti_bulk_in_callback
;
642 urb
->context
= tport
;
644 status
= usb_submit_urb(urb
, GFP_KERNEL
);
646 dev_err(&port
->dev
, "%s - submit read urb failed, %d\n", __FUNCTION__
, status
);
650 tport
->tp_is_open
= 1;
651 ++tdev
->td_open_port_count
;
656 if (tdev
->td_open_port_count
== 0)
657 usb_kill_urb(port
->serial
->port
[0]->interrupt_in_urb
);
659 mutex_unlock(&tdev
->td_open_close_lock
);
660 dbg("%s - exit %d", __FUNCTION__
, status
);
665 static void ti_close(struct usb_serial_port
*port
, struct file
*file
)
667 struct ti_device
*tdev
;
668 struct ti_port
*tport
;
673 dbg("%s - port %d", __FUNCTION__
, port
->number
);
675 tdev
= usb_get_serial_data(port
->serial
);
676 tport
= usb_get_serial_port_data(port
);
677 if (tdev
== NULL
|| tport
== NULL
)
680 tport
->tp_is_open
= 0;
682 ti_drain(tport
, (tport
->tp_closing_wait
*HZ
)/100, 1);
684 usb_kill_urb(port
->read_urb
);
685 usb_kill_urb(port
->write_urb
);
686 tport
->tp_write_urb_in_use
= 0;
688 port_number
= port
->number
- port
->serial
->minor
;
690 dbg("%s - sending TI_CLOSE_PORT", __FUNCTION__
);
691 status
= ti_command_out_sync(tdev
, TI_CLOSE_PORT
,
692 (__u8
)(TI_UART1_PORT
+ port_number
), 0, NULL
, 0);
694 dev_err(&port
->dev
, "%s - cannot send close port command, %d\n" , __FUNCTION__
, status
);
696 /* if mutex_lock is interrupted, continue anyway */
697 do_unlock
= !mutex_lock_interruptible(&tdev
->td_open_close_lock
);
698 --tport
->tp_tdev
->td_open_port_count
;
699 if (tport
->tp_tdev
->td_open_port_count
<= 0) {
700 /* last port is closed, shut down interrupt urb */
701 usb_kill_urb(port
->serial
->port
[0]->interrupt_in_urb
);
702 tport
->tp_tdev
->td_open_port_count
= 0;
705 mutex_unlock(&tdev
->td_open_close_lock
);
707 dbg("%s - exit", __FUNCTION__
);
711 static int ti_write(struct usb_serial_port
*port
, const unsigned char *data
,
714 struct ti_port
*tport
= usb_get_serial_port_data(port
);
717 dbg("%s - port %d", __FUNCTION__
, port
->number
);
720 dbg("%s - write request of 0 bytes", __FUNCTION__
);
724 if (tport
== NULL
|| !tport
->tp_is_open
)
727 spin_lock_irqsave(&tport
->tp_lock
, flags
);
728 count
= ti_buf_put(tport
->tp_write_buf
, data
, count
);
729 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
737 static int ti_write_room(struct usb_serial_port
*port
)
739 struct ti_port
*tport
= usb_get_serial_port_data(port
);
743 dbg("%s - port %d", __FUNCTION__
, port
->number
);
748 spin_lock_irqsave(&tport
->tp_lock
, flags
);
749 room
= ti_buf_space_avail(tport
->tp_write_buf
);
750 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
752 dbg("%s - returns %d", __FUNCTION__
, room
);
757 static int ti_chars_in_buffer(struct usb_serial_port
*port
)
759 struct ti_port
*tport
= usb_get_serial_port_data(port
);
763 dbg("%s - port %d", __FUNCTION__
, port
->number
);
768 spin_lock_irqsave(&tport
->tp_lock
, flags
);
769 chars
= ti_buf_data_avail(tport
->tp_write_buf
);
770 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
772 dbg("%s - returns %d", __FUNCTION__
, chars
);
777 static void ti_throttle(struct usb_serial_port
*port
)
779 struct ti_port
*tport
= usb_get_serial_port_data(port
);
780 struct tty_struct
*tty
;
782 dbg("%s - port %d", __FUNCTION__
, port
->number
);
789 dbg("%s - no tty", __FUNCTION__
);
793 if (I_IXOFF(tty
) || C_CRTSCTS(tty
))
794 ti_stop_read(tport
, tty
);
799 static void ti_unthrottle(struct usb_serial_port
*port
)
801 struct ti_port
*tport
= usb_get_serial_port_data(port
);
802 struct tty_struct
*tty
;
805 dbg("%s - port %d", __FUNCTION__
, port
->number
);
812 dbg("%s - no tty", __FUNCTION__
);
816 if (I_IXOFF(tty
) || C_CRTSCTS(tty
)) {
817 status
= ti_restart_read(tport
, tty
);
819 dev_err(&port
->dev
, "%s - cannot restart read, %d\n", __FUNCTION__
, status
);
824 static int ti_ioctl(struct usb_serial_port
*port
, struct file
*file
,
825 unsigned int cmd
, unsigned long arg
)
827 struct ti_port
*tport
= usb_get_serial_port_data(port
);
828 struct async_icount cnow
;
829 struct async_icount cprev
;
831 dbg("%s - port %d, cmd = 0x%04X", __FUNCTION__
, port
->number
, cmd
);
838 dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__
, port
->number
);
839 return ti_get_serial_info(tport
, (struct serial_struct __user
*)arg
);
843 dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__
, port
->number
);
844 return ti_set_serial_info(tport
, (struct serial_struct __user
*)arg
);
848 dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__
, port
->number
);
849 cprev
= tport
->tp_icount
;
851 interruptible_sleep_on(&tport
->tp_msr_wait
);
852 if (signal_pending(current
))
854 cnow
= tport
->tp_icount
;
855 if (cnow
.rng
== cprev
.rng
&& cnow
.dsr
== cprev
.dsr
&&
856 cnow
.dcd
== cprev
.dcd
&& cnow
.cts
== cprev
.cts
)
857 return -EIO
; /* no change => error */
858 if (((arg
& TIOCM_RNG
) && (cnow
.rng
!= cprev
.rng
)) ||
859 ((arg
& TIOCM_DSR
) && (cnow
.dsr
!= cprev
.dsr
)) ||
860 ((arg
& TIOCM_CD
) && (cnow
.dcd
!= cprev
.dcd
)) ||
861 ((arg
& TIOCM_CTS
) && (cnow
.cts
!= cprev
.cts
)) ) {
869 dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__
, port
->number
, tport
->tp_icount
.rx
, tport
->tp_icount
.tx
);
870 if (copy_to_user((void __user
*)arg
, &tport
->tp_icount
, sizeof(tport
->tp_icount
)))
879 static void ti_set_termios(struct usb_serial_port
*port
,
880 struct ktermios
*old_termios
)
882 struct ti_port
*tport
= usb_get_serial_port_data(port
);
883 struct tty_struct
*tty
= port
->tty
;
884 struct ti_uart_config
*config
;
885 tcflag_t cflag
,iflag
;
888 int port_number
= port
->number
- port
->serial
->minor
;
891 dbg("%s - port %d", __FUNCTION__
, port
->number
);
893 cflag
= tty
->termios
->c_cflag
;
894 iflag
= tty
->termios
->c_iflag
;
896 dbg("%s - cflag %08x, iflag %08x", __FUNCTION__
, cflag
, iflag
);
897 dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__
, old_termios
->c_cflag
, old_termios
->c_iflag
);
902 config
= kmalloc(sizeof(*config
), GFP_KERNEL
);
904 dev_err(&port
->dev
, "%s - out of memory\n", __FUNCTION__
);
910 /* these flags must be set */
911 config
->wFlags
|= TI_UART_ENABLE_MS_INTS
;
912 config
->wFlags
|= TI_UART_ENABLE_AUTO_START_DMA
;
913 config
->bUartMode
= (__u8
)(tport
->tp_uart_mode
);
915 switch (cflag
& CSIZE
) {
917 config
->bDataBits
= TI_UART_5_DATA_BITS
;
920 config
->bDataBits
= TI_UART_6_DATA_BITS
;
923 config
->bDataBits
= TI_UART_7_DATA_BITS
;
927 config
->bDataBits
= TI_UART_8_DATA_BITS
;
931 /* CMSPAR isn't supported by this driver */
932 tty
->termios
->c_cflag
&= ~CMSPAR
;
934 if (cflag
& PARENB
) {
935 if (cflag
& PARODD
) {
936 config
->wFlags
|= TI_UART_ENABLE_PARITY_CHECKING
;
937 config
->bParity
= TI_UART_ODD_PARITY
;
939 config
->wFlags
|= TI_UART_ENABLE_PARITY_CHECKING
;
940 config
->bParity
= TI_UART_EVEN_PARITY
;
943 config
->wFlags
&= ~TI_UART_ENABLE_PARITY_CHECKING
;
944 config
->bParity
= TI_UART_NO_PARITY
;
948 config
->bStopBits
= TI_UART_2_STOP_BITS
;
950 config
->bStopBits
= TI_UART_1_STOP_BITS
;
952 if (cflag
& CRTSCTS
) {
953 /* RTS flow control must be off to drop RTS for baud rate B0 */
954 if ((cflag
& CBAUD
) != B0
)
955 config
->wFlags
|= TI_UART_ENABLE_RTS_IN
;
956 config
->wFlags
|= TI_UART_ENABLE_CTS_OUT
;
959 ti_restart_read(tport
, tty
);
962 if (I_IXOFF(tty
) || I_IXON(tty
)) {
963 config
->cXon
= START_CHAR(tty
);
964 config
->cXoff
= STOP_CHAR(tty
);
967 config
->wFlags
|= TI_UART_ENABLE_X_IN
;
969 ti_restart_read(tport
, tty
);
972 config
->wFlags
|= TI_UART_ENABLE_X_OUT
;
975 baud
= tty_get_baud_rate(tty
);
978 if (tport
->tp_tdev
->td_is_3410
)
979 config
->wBaudRate
= (__u16
)((923077 + baud
/2) / baud
);
981 config
->wBaudRate
= (__u16
)((461538 + baud
/2) / baud
);
983 /* FIXME: Should calculate resulting baud here and report it back */
984 if ((cflag
& CBAUD
) != B0
)
985 tty_encode_baud_rate(tty
, baud
, baud
);
987 dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
988 __FUNCTION__
, baud
, config
->wBaudRate
, config
->wFlags
, config
->bDataBits
, config
->bParity
, config
->bStopBits
, config
->cXon
, config
->cXoff
, config
->bUartMode
);
990 cpu_to_be16s(&config
->wBaudRate
);
991 cpu_to_be16s(&config
->wFlags
);
993 status
= ti_command_out_sync(tport
->tp_tdev
, TI_SET_CONFIG
,
994 (__u8
)(TI_UART1_PORT
+ port_number
), 0, (__u8
*)config
,
997 dev_err(&port
->dev
, "%s - cannot set config on port %d, %d\n", __FUNCTION__
, port_number
, status
);
999 /* SET_CONFIG asserts RTS and DTR, reset them correctly */
1000 mcr
= tport
->tp_shadow_mcr
;
1001 /* if baud rate is B0, clear RTS and DTR */
1002 if ((cflag
& CBAUD
) == B0
)
1003 mcr
&= ~(TI_MCR_DTR
| TI_MCR_RTS
);
1004 status
= ti_set_mcr(tport
, mcr
);
1006 dev_err(&port
->dev
, "%s - cannot set modem control on port %d, %d\n", __FUNCTION__
, port_number
, status
);
1012 static int ti_tiocmget(struct usb_serial_port
*port
, struct file
*file
)
1014 struct ti_port
*tport
= usb_get_serial_port_data(port
);
1015 unsigned int result
;
1018 unsigned long flags
;
1020 dbg("%s - port %d", __FUNCTION__
, port
->number
);
1025 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1026 msr
= tport
->tp_msr
;
1027 mcr
= tport
->tp_shadow_mcr
;
1028 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1030 result
= ((mcr
& TI_MCR_DTR
) ? TIOCM_DTR
: 0)
1031 | ((mcr
& TI_MCR_RTS
) ? TIOCM_RTS
: 0)
1032 | ((mcr
& TI_MCR_LOOP
) ? TIOCM_LOOP
: 0)
1033 | ((msr
& TI_MSR_CTS
) ? TIOCM_CTS
: 0)
1034 | ((msr
& TI_MSR_CD
) ? TIOCM_CAR
: 0)
1035 | ((msr
& TI_MSR_RI
) ? TIOCM_RI
: 0)
1036 | ((msr
& TI_MSR_DSR
) ? TIOCM_DSR
: 0);
1038 dbg("%s - 0x%04X", __FUNCTION__
, result
);
1044 static int ti_tiocmset(struct usb_serial_port
*port
, struct file
*file
,
1045 unsigned int set
, unsigned int clear
)
1047 struct ti_port
*tport
= usb_get_serial_port_data(port
);
1049 unsigned long flags
;
1051 dbg("%s - port %d", __FUNCTION__
, port
->number
);
1056 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1057 mcr
= tport
->tp_shadow_mcr
;
1059 if (set
& TIOCM_RTS
)
1061 if (set
& TIOCM_DTR
)
1063 if (set
& TIOCM_LOOP
)
1066 if (clear
& TIOCM_RTS
)
1068 if (clear
& TIOCM_DTR
)
1070 if (clear
& TIOCM_LOOP
)
1071 mcr
&= ~TI_MCR_LOOP
;
1072 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1074 return ti_set_mcr(tport
, mcr
);
1078 static void ti_break(struct usb_serial_port
*port
, int break_state
)
1080 struct ti_port
*tport
= usb_get_serial_port_data(port
);
1083 dbg("%s - state = %d", __FUNCTION__
, break_state
);
1088 ti_drain(tport
, (tport
->tp_closing_wait
*HZ
)/100, 0);
1090 status
= ti_write_byte(tport
->tp_tdev
,
1091 tport
->tp_uart_base_addr
+ TI_UART_OFFSET_LCR
,
1092 TI_LCR_BREAK
, break_state
== -1 ? TI_LCR_BREAK
: 0);
1095 dbg("%s - error setting break, %d", __FUNCTION__
, status
);
1099 static void ti_interrupt_callback(struct urb
*urb
)
1101 struct ti_device
*tdev
= (struct ti_device
*)urb
->context
;
1102 struct usb_serial_port
*port
;
1103 struct usb_serial
*serial
= tdev
->td_serial
;
1104 struct ti_port
*tport
;
1105 struct device
*dev
= &urb
->dev
->dev
;
1106 unsigned char *data
= urb
->transfer_buffer
;
1107 int length
= urb
->actual_length
;
1110 int status
= urb
->status
;
1114 dbg("%s", __FUNCTION__
);
1122 dbg("%s - urb shutting down, %d", __FUNCTION__
, status
);
1123 tdev
->td_urb_error
= 1;
1126 dev_err(dev
, "%s - nonzero urb status, %d\n",
1127 __FUNCTION__
, status
);
1128 tdev
->td_urb_error
= 1;
1133 dbg("%s - bad packet size, %d", __FUNCTION__
, length
);
1137 if (data
[0] == TI_CODE_HARDWARE_ERROR
) {
1138 dev_err(dev
, "%s - hardware error, %d\n", __FUNCTION__
, data
[1]);
1142 port_number
= TI_GET_PORT_FROM_CODE(data
[0]);
1143 function
= TI_GET_FUNC_FROM_CODE(data
[0]);
1145 dbg("%s - port_number %d, function %d, data 0x%02X", __FUNCTION__
, port_number
, function
, data
[1]);
1147 if (port_number
>= serial
->num_ports
) {
1148 dev_err(dev
, "%s - bad port number, %d\n", __FUNCTION__
, port_number
);
1152 port
= serial
->port
[port_number
];
1154 tport
= usb_get_serial_port_data(port
);
1159 case TI_CODE_DATA_ERROR
:
1160 dev_err(dev
, "%s - DATA ERROR, port %d, data 0x%02X\n", __FUNCTION__
, port_number
, data
[1]);
1163 case TI_CODE_MODEM_STATUS
:
1165 dbg("%s - port %d, msr 0x%02X", __FUNCTION__
, port_number
, msr
);
1166 ti_handle_new_msr(tport
, msr
);
1170 dev_err(dev
, "%s - unknown interrupt code, 0x%02X\n", __FUNCTION__
, data
[1]);
1175 retval
= usb_submit_urb(urb
, GFP_ATOMIC
);
1177 dev_err(dev
, "%s - resubmit interrupt urb failed, %d\n",
1178 __FUNCTION__
, retval
);
1182 static void ti_bulk_in_callback(struct urb
*urb
)
1184 struct ti_port
*tport
= (struct ti_port
*)urb
->context
;
1185 struct usb_serial_port
*port
= tport
->tp_port
;
1186 struct device
*dev
= &urb
->dev
->dev
;
1187 int status
= urb
->status
;
1190 dbg("%s", __FUNCTION__
);
1198 dbg("%s - urb shutting down, %d", __FUNCTION__
, status
);
1199 tport
->tp_tdev
->td_urb_error
= 1;
1200 wake_up_interruptible(&tport
->tp_write_wait
);
1203 dev_err(dev
, "%s - nonzero urb status, %d\n",
1204 __FUNCTION__
, status
);
1205 tport
->tp_tdev
->td_urb_error
= 1;
1206 wake_up_interruptible(&tport
->tp_write_wait
);
1209 if (status
== -EPIPE
)
1213 dev_err(dev
, "%s - stopping read!\n", __FUNCTION__
);
1217 if (port
->tty
&& urb
->actual_length
) {
1218 usb_serial_debug_data(debug
, dev
, __FUNCTION__
,
1219 urb
->actual_length
, urb
->transfer_buffer
);
1221 if (!tport
->tp_is_open
)
1222 dbg("%s - port closed, dropping data", __FUNCTION__
);
1224 ti_recv(&urb
->dev
->dev
, port
->tty
, urb
->transfer_buffer
,
1225 urb
->actual_length
);
1227 spin_lock(&tport
->tp_lock
);
1228 tport
->tp_icount
.rx
+= urb
->actual_length
;
1229 spin_unlock(&tport
->tp_lock
);
1233 /* continue to read unless stopping */
1234 spin_lock(&tport
->tp_lock
);
1235 if (tport
->tp_read_urb_state
== TI_READ_URB_RUNNING
) {
1236 urb
->dev
= port
->serial
->dev
;
1237 retval
= usb_submit_urb(urb
, GFP_ATOMIC
);
1238 } else if (tport
->tp_read_urb_state
== TI_READ_URB_STOPPING
) {
1239 tport
->tp_read_urb_state
= TI_READ_URB_STOPPED
;
1241 spin_unlock(&tport
->tp_lock
);
1243 dev_err(dev
, "%s - resubmit read urb failed, %d\n",
1244 __FUNCTION__
, retval
);
1248 static void ti_bulk_out_callback(struct urb
*urb
)
1250 struct ti_port
*tport
= (struct ti_port
*)urb
->context
;
1251 struct usb_serial_port
*port
= tport
->tp_port
;
1252 struct device
*dev
= &urb
->dev
->dev
;
1253 int status
= urb
->status
;
1255 dbg("%s - port %d", __FUNCTION__
, port
->number
);
1257 tport
->tp_write_urb_in_use
= 0;
1265 dbg("%s - urb shutting down, %d", __FUNCTION__
, status
);
1266 tport
->tp_tdev
->td_urb_error
= 1;
1267 wake_up_interruptible(&tport
->tp_write_wait
);
1270 dev_err(dev
, "%s - nonzero urb status, %d\n",
1271 __FUNCTION__
, status
);
1272 tport
->tp_tdev
->td_urb_error
= 1;
1273 wake_up_interruptible(&tport
->tp_write_wait
);
1276 /* send any buffered data */
1281 static void ti_recv(struct device
*dev
, struct tty_struct
*tty
,
1282 unsigned char *data
, int length
)
1287 cnt
= tty_buffer_request_room(tty
, length
);
1289 dev_err(dev
, "%s - dropping data, %d bytes lost\n", __FUNCTION__
, length
- cnt
);
1293 tty_insert_flip_string(tty
, data
, cnt
);
1294 tty_flip_buffer_push(tty
);
1297 } while (length
> 0);
1302 static void ti_send(struct ti_port
*tport
)
1305 struct usb_serial_port
*port
= tport
->tp_port
;
1306 struct tty_struct
*tty
= port
->tty
;
1307 unsigned long flags
;
1310 dbg("%s - port %d", __FUNCTION__
, port
->number
);
1312 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1314 if (tport
->tp_write_urb_in_use
) {
1315 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1319 count
= ti_buf_get(tport
->tp_write_buf
,
1320 port
->write_urb
->transfer_buffer
,
1321 port
->bulk_out_size
);
1324 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1328 tport
->tp_write_urb_in_use
= 1;
1330 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1332 usb_serial_debug_data(debug
, &port
->dev
, __FUNCTION__
, count
, port
->write_urb
->transfer_buffer
);
1334 usb_fill_bulk_urb(port
->write_urb
, port
->serial
->dev
,
1335 usb_sndbulkpipe(port
->serial
->dev
,
1336 port
->bulk_out_endpointAddress
),
1337 port
->write_urb
->transfer_buffer
, count
,
1338 ti_bulk_out_callback
, tport
);
1340 result
= usb_submit_urb(port
->write_urb
, GFP_ATOMIC
);
1342 dev_err(&port
->dev
, "%s - submit write urb failed, %d\n", __FUNCTION__
, result
);
1343 tport
->tp_write_urb_in_use
= 0;
1344 /* TODO: reschedule ti_send */
1346 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1347 tport
->tp_icount
.tx
+= count
;
1348 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1351 /* more room in the buffer for new writes, wakeup */
1354 wake_up_interruptible(&tport
->tp_write_wait
);
1358 static int ti_set_mcr(struct ti_port
*tport
, unsigned int mcr
)
1360 unsigned long flags
;
1363 status
= ti_write_byte(tport
->tp_tdev
,
1364 tport
->tp_uart_base_addr
+ TI_UART_OFFSET_MCR
,
1365 TI_MCR_RTS
| TI_MCR_DTR
| TI_MCR_LOOP
, mcr
);
1367 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1369 tport
->tp_shadow_mcr
= mcr
;
1370 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1376 static int ti_get_lsr(struct ti_port
*tport
)
1379 struct ti_device
*tdev
= tport
->tp_tdev
;
1380 struct usb_serial_port
*port
= tport
->tp_port
;
1381 int port_number
= port
->number
- port
->serial
->minor
;
1382 struct ti_port_status
*data
;
1384 dbg("%s - port %d", __FUNCTION__
, port
->number
);
1386 size
= sizeof(struct ti_port_status
);
1387 data
= kmalloc(size
, GFP_KERNEL
);
1389 dev_err(&port
->dev
, "%s - out of memory\n", __FUNCTION__
);
1393 status
= ti_command_in_sync(tdev
, TI_GET_PORT_STATUS
,
1394 (__u8
)(TI_UART1_PORT
+port_number
), 0, (__u8
*)data
, size
);
1396 dev_err(&port
->dev
, "%s - get port status command failed, %d\n", __FUNCTION__
, status
);
1400 dbg("%s - lsr 0x%02X", __FUNCTION__
, data
->bLSR
);
1402 tport
->tp_lsr
= data
->bLSR
;
1410 static int ti_get_serial_info(struct ti_port
*tport
,
1411 struct serial_struct __user
*ret_arg
)
1413 struct usb_serial_port
*port
= tport
->tp_port
;
1414 struct serial_struct ret_serial
;
1419 memset(&ret_serial
, 0, sizeof(ret_serial
));
1421 ret_serial
.type
= PORT_16550A
;
1422 ret_serial
.line
= port
->serial
->minor
;
1423 ret_serial
.port
= port
->number
- port
->serial
->minor
;
1424 ret_serial
.flags
= tport
->tp_flags
;
1425 ret_serial
.xmit_fifo_size
= TI_WRITE_BUF_SIZE
;
1426 ret_serial
.baud_base
= tport
->tp_tdev
->td_is_3410
? 921600 : 460800;
1427 ret_serial
.closing_wait
= tport
->tp_closing_wait
;
1429 if (copy_to_user(ret_arg
, &ret_serial
, sizeof(*ret_arg
)))
1436 static int ti_set_serial_info(struct ti_port
*tport
,
1437 struct serial_struct __user
*new_arg
)
1439 struct usb_serial_port
*port
= tport
->tp_port
;
1440 struct serial_struct new_serial
;
1442 if (copy_from_user(&new_serial
, new_arg
, sizeof(new_serial
)))
1445 tport
->tp_flags
= new_serial
.flags
& TI_SET_SERIAL_FLAGS
;
1447 port
->tty
->low_latency
=
1448 (tport
->tp_flags
& ASYNC_LOW_LATENCY
) ? 1 : 0;
1449 tport
->tp_closing_wait
= new_serial
.closing_wait
;
1455 static void ti_handle_new_msr(struct ti_port
*tport
, __u8 msr
)
1457 struct async_icount
*icount
;
1458 struct tty_struct
*tty
;
1459 unsigned long flags
;
1461 dbg("%s - msr 0x%02X", __FUNCTION__
, msr
);
1463 if (msr
& TI_MSR_DELTA_MASK
) {
1464 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1465 icount
= &tport
->tp_icount
;
1466 if (msr
& TI_MSR_DELTA_CTS
)
1468 if (msr
& TI_MSR_DELTA_DSR
)
1470 if (msr
& TI_MSR_DELTA_CD
)
1472 if (msr
& TI_MSR_DELTA_RI
)
1474 wake_up_interruptible(&tport
->tp_msr_wait
);
1475 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1478 tport
->tp_msr
= msr
& TI_MSR_MASK
;
1480 /* handle CTS flow control */
1481 tty
= tport
->tp_port
->tty
;
1482 if (tty
&& C_CRTSCTS(tty
)) {
1483 if (msr
& TI_MSR_CTS
) {
1484 tty
->hw_stopped
= 0;
1487 tty
->hw_stopped
= 1;
1493 static void ti_drain(struct ti_port
*tport
, unsigned long timeout
, int flush
)
1495 struct ti_device
*tdev
= tport
->tp_tdev
;
1496 struct usb_serial_port
*port
= tport
->tp_port
;
1499 dbg("%s - port %d", __FUNCTION__
, port
->number
);
1501 spin_lock_irq(&tport
->tp_lock
);
1503 /* wait for data to drain from the buffer */
1504 tdev
->td_urb_error
= 0;
1505 init_waitqueue_entry(&wait
, current
);
1506 add_wait_queue(&tport
->tp_write_wait
, &wait
);
1508 set_current_state(TASK_INTERRUPTIBLE
);
1509 if (ti_buf_data_avail(tport
->tp_write_buf
) == 0
1510 || timeout
== 0 || signal_pending(current
)
1511 || tdev
->td_urb_error
1512 || port
->serial
->disconnected
) /* disconnect */
1514 spin_unlock_irq(&tport
->tp_lock
);
1515 timeout
= schedule_timeout(timeout
);
1516 spin_lock_irq(&tport
->tp_lock
);
1518 set_current_state(TASK_RUNNING
);
1519 remove_wait_queue(&tport
->tp_write_wait
, &wait
);
1521 /* flush any remaining data in the buffer */
1523 ti_buf_clear(tport
->tp_write_buf
);
1525 spin_unlock_irq(&tport
->tp_lock
);
1527 mutex_lock(&port
->serial
->disc_mutex
);
1528 /* wait for data to drain from the device */
1529 /* wait for empty tx register, plus 20 ms */
1531 tport
->tp_lsr
&= ~TI_LSR_TX_EMPTY
;
1532 while ((long)(jiffies
- timeout
) < 0 && !signal_pending(current
)
1533 && !(tport
->tp_lsr
&TI_LSR_TX_EMPTY
) && !tdev
->td_urb_error
1534 && !port
->serial
->disconnected
) {
1535 if (ti_get_lsr(tport
))
1537 mutex_unlock(&port
->serial
->disc_mutex
);
1538 msleep_interruptible(20);
1539 mutex_lock(&port
->serial
->disc_mutex
);
1541 mutex_unlock(&port
->serial
->disc_mutex
);
1545 static void ti_stop_read(struct ti_port
*tport
, struct tty_struct
*tty
)
1547 unsigned long flags
;
1549 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1551 if (tport
->tp_read_urb_state
== TI_READ_URB_RUNNING
)
1552 tport
->tp_read_urb_state
= TI_READ_URB_STOPPING
;
1554 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1558 static int ti_restart_read(struct ti_port
*tport
, struct tty_struct
*tty
)
1562 unsigned long flags
;
1564 spin_lock_irqsave(&tport
->tp_lock
, flags
);
1566 if (tport
->tp_read_urb_state
== TI_READ_URB_STOPPED
) {
1567 tport
->tp_read_urb_state
= TI_READ_URB_RUNNING
;
1568 urb
= tport
->tp_port
->read_urb
;
1569 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1570 urb
->complete
= ti_bulk_in_callback
;
1571 urb
->context
= tport
;
1572 urb
->dev
= tport
->tp_port
->serial
->dev
;
1573 status
= usb_submit_urb(urb
, GFP_KERNEL
);
1575 tport
->tp_read_urb_state
= TI_READ_URB_RUNNING
;
1576 spin_unlock_irqrestore(&tport
->tp_lock
, flags
);
1583 static int ti_command_out_sync(struct ti_device
*tdev
, __u8 command
,
1584 __u16 moduleid
, __u16 value
, __u8
*data
, int size
)
1588 status
= usb_control_msg(tdev
->td_serial
->dev
,
1589 usb_sndctrlpipe(tdev
->td_serial
->dev
, 0), command
,
1590 (USB_TYPE_VENDOR
| USB_RECIP_DEVICE
| USB_DIR_OUT
),
1591 value
, moduleid
, data
, size
, 1000);
1603 static int ti_command_in_sync(struct ti_device
*tdev
, __u8 command
,
1604 __u16 moduleid
, __u16 value
, __u8
*data
, int size
)
1608 status
= usb_control_msg(tdev
->td_serial
->dev
,
1609 usb_rcvctrlpipe(tdev
->td_serial
->dev
, 0), command
,
1610 (USB_TYPE_VENDOR
| USB_RECIP_DEVICE
| USB_DIR_IN
),
1611 value
, moduleid
, data
, size
, 1000);
1623 static int ti_write_byte(struct ti_device
*tdev
, unsigned long addr
,
1624 __u8 mask
, __u8 byte
)
1628 struct ti_write_data_bytes
*data
;
1629 struct device
*dev
= &tdev
->td_serial
->dev
->dev
;
1631 dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __FUNCTION__
, addr
, mask
, byte
);
1633 size
= sizeof(struct ti_write_data_bytes
) + 2;
1634 data
= kmalloc(size
, GFP_KERNEL
);
1636 dev_err(dev
, "%s - out of memory\n", __FUNCTION__
);
1640 data
->bAddrType
= TI_RW_DATA_ADDR_XDATA
;
1641 data
->bDataType
= TI_RW_DATA_BYTE
;
1642 data
->bDataCounter
= 1;
1643 data
->wBaseAddrHi
= cpu_to_be16(addr
>>16);
1644 data
->wBaseAddrLo
= cpu_to_be16(addr
);
1645 data
->bData
[0] = mask
;
1646 data
->bData
[1] = byte
;
1648 status
= ti_command_out_sync(tdev
, TI_WRITE_DATA
, TI_RAM_PORT
, 0,
1649 (__u8
*)data
, size
);
1652 dev_err(dev
, "%s - failed, %d\n", __FUNCTION__
, status
);
1660 static int ti_download_firmware(struct ti_device
*tdev
,
1661 unsigned char *firmware
, unsigned int firmware_size
)
1670 struct usb_device
*dev
= tdev
->td_serial
->dev
;
1671 struct ti_firmware_header
*header
;
1672 unsigned int pipe
= usb_sndbulkpipe(dev
,
1673 tdev
->td_serial
->port
[0]->bulk_out_endpointAddress
);
1676 buffer_size
= TI_FIRMWARE_BUF_SIZE
+ sizeof(struct ti_firmware_header
);
1677 buffer
= kmalloc(buffer_size
, GFP_KERNEL
);
1679 dev_err(&dev
->dev
, "%s - out of memory\n", __FUNCTION__
);
1683 memcpy(buffer
, firmware
, firmware_size
);
1684 memset(buffer
+firmware_size
, 0xff, buffer_size
-firmware_size
);
1686 for(pos
= sizeof(struct ti_firmware_header
); pos
< buffer_size
; pos
++)
1687 cs
= (__u8
)(cs
+ buffer
[pos
]);
1689 header
= (struct ti_firmware_header
*)buffer
;
1690 header
->wLength
= cpu_to_le16((__u16
)(buffer_size
- sizeof(struct ti_firmware_header
)));
1691 header
->bCheckSum
= cs
;
1693 dbg("%s - downloading firmware", __FUNCTION__
);
1694 for (pos
= 0; pos
< buffer_size
; pos
+= done
) {
1695 len
= min(buffer_size
- pos
, TI_DOWNLOAD_MAX_PACKET_SIZE
);
1696 status
= usb_bulk_msg(dev
, pipe
, buffer
+pos
, len
, &done
, 1000);
1704 dev_err(&dev
->dev
, "%s - error downloading firmware, %d\n", __FUNCTION__
, status
);
1708 dbg("%s - download successful", __FUNCTION__
);
1714 /* Circular Buffer Functions */
1719 * Allocate a circular buffer and all associated memory.
1722 static struct circ_buf
*ti_buf_alloc(void)
1724 struct circ_buf
*cb
;
1726 cb
= kmalloc(sizeof(struct circ_buf
), GFP_KERNEL
);
1730 cb
->buf
= kmalloc(TI_WRITE_BUF_SIZE
, GFP_KERNEL
);
1731 if (cb
->buf
== NULL
) {
1745 * Free the buffer and all associated memory.
1748 static void ti_buf_free(struct circ_buf
*cb
)
1758 * Clear out all data in the circular buffer.
1761 static void ti_buf_clear(struct circ_buf
*cb
)
1763 cb
->head
= cb
->tail
= 0;
1770 * Return the number of bytes of data available in the circular
1774 static int ti_buf_data_avail(struct circ_buf
*cb
)
1776 return CIRC_CNT(cb
->head
,cb
->tail
,TI_WRITE_BUF_SIZE
);
1781 * ti_buf_space_avail
1783 * Return the number of bytes of space available in the circular
1787 static int ti_buf_space_avail(struct circ_buf
*cb
)
1789 return CIRC_SPACE(cb
->head
,cb
->tail
,TI_WRITE_BUF_SIZE
);
1796 * Copy data data from a user buffer and put it into the circular buffer.
1797 * Restrict to the amount of space available.
1799 * Return the number of bytes copied.
1802 static int ti_buf_put(struct circ_buf
*cb
, const char *buf
, int count
)
1807 c
= CIRC_SPACE_TO_END(cb
->head
, cb
->tail
, TI_WRITE_BUF_SIZE
);
1812 memcpy(cb
->buf
+ cb
->head
, buf
, c
);
1813 cb
->head
= (cb
->head
+ c
) & (TI_WRITE_BUF_SIZE
-1);
1826 * Get data from the circular buffer and copy to the given buffer.
1827 * Restrict to the amount of data available.
1829 * Return the number of bytes copied.
1832 static int ti_buf_get(struct circ_buf
*cb
, char *buf
, int count
)
1837 c
= CIRC_CNT_TO_END(cb
->head
, cb
->tail
, TI_WRITE_BUF_SIZE
);
1842 memcpy(buf
, cb
->buf
+ cb
->tail
, c
);
1843 cb
->tail
= (cb
->tail
+ c
) & (TI_WRITE_BUF_SIZE
-1);