?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PKT_SCHED]: Clean up duplicate includes in net/sched/
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / ppc / syslib / ppc440spe_pcie.c
blobdd5d4b958c31e465320ba3a16f75f2d141cdf9b2
1 /*
2 * Copyright (c) 2005 Cisco Systems. All rights reserved.
3 * Roland Dreier <rolandd@cisco.com>
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/delay.h>
13 #include <linux/pci.h>
14 #include <linux/init.h>
15
16 #include <asm/reg.h>
17 #include <asm/io.h>
18 #include <asm/ibm44x.h>
19
20 #include "ppc440spe_pcie.h"
21
22 static int
23 pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
24 int len, u32 *val)
25 {
26 struct pci_controller *hose = bus->sysdata;
27
28 if (PCI_SLOT(devfn) != 1)
29 return PCIBIOS_DEVICE_NOT_FOUND;
30
31 offset += devfn << 12;
32
33 /*
34 * Note: the caller has already checked that offset is
35 * suitably aligned and that len is 1, 2 or 4.
36 */
37 switch (len) {
38 case 1:
39 *val = in_8(hose->cfg_data + offset);
40 break;
41 case 2:
42 *val = in_le16(hose->cfg_data + offset);
43 break;
44 default:
45 *val = in_le32(hose->cfg_data + offset);
46 break;
47 }
48
49 if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
50
51 return PCIBIOS_SUCCESSFUL;
52 }
53
54 static int
55 pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
56 int len, u32 val)
57 {
58 struct pci_controller *hose = bus->sysdata;
59
60 if (PCI_SLOT(devfn) != 1)
61 return PCIBIOS_DEVICE_NOT_FOUND;
62
63 offset += devfn << 12;
64
65 switch (len) {
66 case 1:
67 out_8(hose->cfg_data + offset, val);
68 break;
69 case 2:
70 out_le16(hose->cfg_data + offset, val);
71 break;
72 default:
73 out_le32(hose->cfg_data + offset, val);
74 break;
75 }
76 return PCIBIOS_SUCCESSFUL;
77 }
78
79 static struct pci_ops pcie_pci_ops =
80 {
81 .read = pcie_read_config,
82 .write = pcie_write_config
83 };
84
85 enum {
86 PTYPE_ENDPOINT = 0x0,
87 PTYPE_LEGACY_ENDPOINT = 0x1,
88 PTYPE_ROOT_PORT = 0x4,
89
90 LNKW_X1 = 0x1,
91 LNKW_X4 = 0x4,
92 LNKW_X8 = 0x8
93 };
94
95 static void check_error(void)
96 {
97 u32 valPE0, valPE1, valPE2;
98
99 /* SDR0_PEGPLLLCT1 reset */
100 if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
101 printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
102 }
103
104 valPE0 = SDR_READ(PESDR0_RCSSET);
105 valPE1 = SDR_READ(PESDR1_RCSSET);
106 valPE2 = SDR_READ(PESDR2_RCSSET);
107
108 /* SDR0_PExRCSSET rstgu */
109 if ( !(valPE0 & 0x01000000) ||
110 !(valPE1 & 0x01000000) ||
111 !(valPE2 & 0x01000000)) {
112 printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n");
113 }
114
115 /* SDR0_PExRCSSET rstdl */
116 if ( !(valPE0 & 0x00010000) ||
117 !(valPE1 & 0x00010000) ||
118 !(valPE2 & 0x00010000)) {
119 printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n");
120 }
121
122 /* SDR0_PExRCSSET rstpyn */
123 if ( (valPE0 & 0x00001000) ||
124 (valPE1 & 0x00001000) ||
125 (valPE2 & 0x00001000)) {
126 printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n");
127 }
128
129 /* SDR0_PExRCSSET hldplb */
130 if ( (valPE0 & 0x10000000) ||
131 (valPE1 & 0x10000000) ||
132 (valPE2 & 0x10000000)) {
133 printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n");
134 }
135
136 /* SDR0_PExRCSSET rdy */
137 if ( (valPE0 & 0x00100000) ||
138 (valPE1 & 0x00100000) ||
139 (valPE2 & 0x00100000)) {
140 printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n");
141 }
142
143 /* SDR0_PExRCSSET shutdown */
144 if ( (valPE0 & 0x00000100) ||
145 (valPE1 & 0x00000100) ||
146 (valPE2 & 0x00000100)) {
147 printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n");
148 }
149 }
150
151 /*
152 * Initialize PCI Express core as described in User Manual section 27.12.1
153 */
154 int ppc440spe_init_pcie(void)
155 {
156 /* Set PLL clock receiver to LVPECL */
157 SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
158
159 check_error();
160
161 printk(KERN_INFO "PCIE initialization OK\n");
162
163 if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
164 printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
165 SDR_READ(PESDR0_PLLLCT2));
166
167 /* De-assert reset of PCIe PLL, wait for lock */
168 SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
169 udelay(3);
170
171 return 0;
172 }
173
174 int ppc440spe_init_pcie_rootport(int port)
175 {
176 static int core_init;
177 void __iomem *utl_base;
178 u32 val = 0;
179 int i;
180
181 if (!core_init) {
182 ++core_init;
183 i = ppc440spe_init_pcie();
184 if (i)
185 return i;
186 }
187
188 /*
189 * Initialize various parts of the PCI Express core for our port:
190 *
191 * - Set as a root port and enable max width
192 * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
193 * - Set up UTL configuration.
194 * - Increase SERDES drive strength to levels suggested by AMCC.
195 * - De-assert RSTPYN, RSTDL and RSTGU.
196 */
197 switch (port) {
198 case 0:
199 SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
200
201 SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
202 SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
203
204 SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
205 SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
206 SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
207 SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
208 SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
209 SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
210 SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
211 SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
212
213 SDR_WRITE(PESDR0_RCSSET,
214 (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
215 break;
216
217 case 1:
218 SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
219
220 SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
221 SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
222
223 SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
224 SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
225 SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
226 SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
227
228 SDR_WRITE(PESDR1_RCSSET,
229 (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
230 break;
231
232 case 2:
233 SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
234
235 SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
236 SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
237
238 SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
239 SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
240 SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
241 SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
242
243 SDR_WRITE(PESDR2_RCSSET,
244 (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
245 break;
246 }
247
248 mdelay(1000);
249
250 switch (port) {
251 case 0: val = SDR_READ(PESDR0_RCSSTS); break;
252 case 1: val = SDR_READ(PESDR1_RCSSTS); break;
253 case 2: val = SDR_READ(PESDR2_RCSSTS); break;
254 }
255
256 if (!(val & (1 << 20)))
257 printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
258 else
259 printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
260
261 switch (port) {
262 case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
263 case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
264 case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
265 }
266
267 /*
268 * Map UTL registers at 0xc_1000_0n00
269 */
270 switch (port) {
271 case 0:
272 mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
273 mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
274 mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
275 mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
276 break;
277
278 case 1:
279 mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
280 mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
281 mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
282 mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
283 break;
284
285 case 2:
286 mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
287 mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
288 mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
289 mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
290 }
291
292 utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
293
294 /*
295 * Set buffer allocations and then assert VRB and TXE.
296 */
297 out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
298 out_be32(utl_base + PEUTL_INTR, 0x02000000);
299 out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
300 out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
301 out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
302 out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
303 out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
304 out_be32(utl_base + PEUTL_PCTL, 0x80800066);
305
306 iounmap(utl_base);
307
308 /*
309 * We map PCI Express configuration access into the 512MB regions
310 * PCIE0: 0xc_4000_0000
311 * PCIE1: 0xc_8000_0000
312 * PCIE2: 0xc_c000_0000
313 */
314 switch (port) {
315 case 0:
316 mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
317 mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
318 mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
319 break;
320
321 case 1:
322 mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
323 mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
324 mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
325 break;
326
327 case 2:
328 mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
329 mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
330 mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
331 break;
332 }
333
334 /*
335 * Check for VC0 active and assert RDY.
336 */
337 switch (port) {
338 case 0:
339 if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
340 printk(KERN_WARNING "PCIE0: VC0 not active\n");
341 SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
342 break;
343 case 1:
344 if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
345 printk(KERN_WARNING "PCIE0: VC0 not active\n");
346 SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
347 break;
348 case 2:
349 if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
350 printk(KERN_WARNING "PCIE0: VC0 not active\n");
351 SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
352 break;
353 }
354
355 #if 0
356 /* Dump all config regs */
357 for (i = 0x300; i <= 0x320; ++i)
358 printk("[%04x] 0x%08x\n", i, SDR_READ(i));
359 for (i = 0x340; i <= 0x353; ++i)
360 printk("[%04x] 0x%08x\n", i, SDR_READ(i));
361 for (i = 0x370; i <= 0x383; ++i)
362 printk("[%04x] 0x%08x\n", i, SDR_READ(i));
363 for (i = 0x3a0; i <= 0x3a2; ++i)
364 printk("[%04x] 0x%08x\n", i, SDR_READ(i));
365 for (i = 0x3c0; i <= 0x3c3; ++i)
366 printk("[%04x] 0x%08x\n", i, SDR_READ(i));
367 #endif
368
369 mdelay(100);
370
371 return 0;
372 }
373
374 void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
375 {
376 void __iomem *mbase;
377
378 /*
379 * Map 16MB, which is enough for 4 bits of bus #
380 */
381 hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
382 1 << 24);
383 hose->ops = &pcie_pci_ops;
384
385 /*
386 * Set bus numbers on our root port
387 */
388 mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
389 out_8(mbase + PCI_PRIMARY_BUS, 0);
390 out_8(mbase + PCI_SECONDARY_BUS, 0);
391
392 /*
393 * Set up outbound translation to hose->mem_space from PLB
394 * addresses at an offset of 0xd_0000_0000. We set the low
395 * bits of the mask to 11 to turn off splitting into 8
396 * subregions and to enable the outbound translation.
397 */
398 out_le32(mbase + PECFG_POM0LAH, 0);
399 out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
400
401 switch (port) {
402 case 0:
403 mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d);
404 mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), hose->mem_space.start);
405 mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
406 mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
407 ~(hose->mem_space.end - hose->mem_space.start) | 3);
408 break;
409 case 1:
410 mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d);
411 mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), hose->mem_space.start);
412 mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
413 mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
414 ~(hose->mem_space.end - hose->mem_space.start) | 3);
415
416 break;
417 case 2:
418 mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d);
419 mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), hose->mem_space.start);
420 mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
421 mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
422 ~(hose->mem_space.end - hose->mem_space.start) | 3);
423 break;
424 }
425
426 /* Set up 16GB inbound memory window at 0 */
427 out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
428 out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
429 out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
430 out_le32(mbase + PECFG_BAR0LMPA, 0);
431 out_le32(mbase + PECFG_PIM0LAL, 0);
432 out_le32(mbase + PECFG_PIM0LAH, 0);
433 out_le32(mbase + PECFG_PIMEN, 0x1);
434
435 /* Enable I/O, Mem, and Busmaster cycles */
436 out_le16(mbase + PCI_COMMAND,
437 in_le16(mbase + PCI_COMMAND) |
438 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
439
440 iounmap(mbase);
441 }
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree