?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ARM: Consolidate clks_register() and similar
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-realview / core.c
blob90bd4ef71b2cae9b426d0bf5e707c2a441a35e1c
1 /*
2 * linux/arch/arm/mach-realview/core.c
3 *
4 * Copyright (C) 1999 - 2003 ARM Limited
5 * Copyright (C) 2000 Deep Blue Solutions Ltd
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21 #include <linux/init.h>
22 #include <linux/platform_device.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/sysdev.h>
25 #include <linux/interrupt.h>
26 #include <linux/amba/bus.h>
27 #include <linux/amba/clcd.h>
28 #include <linux/clocksource.h>
29 #include <linux/clockchips.h>
30 #include <linux/io.h>
31 #include <linux/smsc911x.h>
32 #include <linux/ata_platform.h>
33 #include <linux/amba/mmci.h>
34
35 #include <asm/clkdev.h>
36 #include <asm/system.h>
37 #include <mach/hardware.h>
38 #include <asm/irq.h>
39 #include <asm/leds.h>
40 #include <asm/mach-types.h>
41 #include <asm/hardware/arm_timer.h>
42 #include <asm/hardware/icst307.h>
43
44 #include <asm/mach/arch.h>
45 #include <asm/mach/flash.h>
46 #include <asm/mach/irq.h>
47 #include <asm/mach/map.h>
48
49 #include <asm/hardware/gic.h>
50
51 #include <mach/platform.h>
52 #include <mach/irqs.h>
53
54 #include "core.h"
55 #include "clock.h"
56
57 #define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
58
59 /* used by entry-macro.S and platsmp.c */
60 void __iomem *gic_cpu_base_addr;
61
62 #ifdef CONFIG_ZONE_DMA
63 /*
64 * Adjust the zones if there are restrictions for DMA access.
65 */
66 void __init realview_adjust_zones(int node, unsigned long *size,
67 unsigned long *hole)
68 {
69 unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
70
71 if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
72 return;
73
74 size[ZONE_NORMAL] = size[0] - dma_size;
75 size[ZONE_DMA] = dma_size;
76 hole[ZONE_NORMAL] = hole[0];
77 hole[ZONE_DMA] = 0;
78 }
79 #endif
80
81 /*
82 * This is the RealView sched_clock implementation. This has
83 * a resolution of 41.7ns, and a maximum value of about 179s.
84 */
85 unsigned long long sched_clock(void)
86 {
87 unsigned long long v;
88
89 v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
90 do_div(v, 3);
91
92 return v;
93 }
94
95
96 #define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
97
98 static int realview_flash_init(void)
99 {
100 u32 val;
101
102 val = __raw_readl(REALVIEW_FLASHCTRL);
103 val &= ~REALVIEW_FLASHPROG_FLVPPEN;
104 __raw_writel(val, REALVIEW_FLASHCTRL);
105
106 return 0;
107 }
108
109 static void realview_flash_exit(void)
110 {
111 u32 val;
112
113 val = __raw_readl(REALVIEW_FLASHCTRL);
114 val &= ~REALVIEW_FLASHPROG_FLVPPEN;
115 __raw_writel(val, REALVIEW_FLASHCTRL);
116 }
117
118 static void realview_flash_set_vpp(int on)
119 {
120 u32 val;
121
122 val = __raw_readl(REALVIEW_FLASHCTRL);
123 if (on)
124 val |= REALVIEW_FLASHPROG_FLVPPEN;
125 else
126 val &= ~REALVIEW_FLASHPROG_FLVPPEN;
127 __raw_writel(val, REALVIEW_FLASHCTRL);
128 }
129
130 static struct flash_platform_data realview_flash_data = {
131 .map_name = "cfi_probe",
132 .width = 4,
133 .init = realview_flash_init,
134 .exit = realview_flash_exit,
135 .set_vpp = realview_flash_set_vpp,
136 };
137
138 struct platform_device realview_flash_device = {
139 .name = "armflash",
140 .id = 0,
141 .dev = {
142 .platform_data = &realview_flash_data,
143 },
144 };
145
146 int realview_flash_register(struct resource *res, u32 num)
147 {
148 realview_flash_device.resource = res;
149 realview_flash_device.num_resources = num;
150 return platform_device_register(&realview_flash_device);
151 }
152
153 static struct smsc911x_platform_config smsc911x_config = {
154 .flags = SMSC911X_USE_32BIT,
155 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
156 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
157 .phy_interface = PHY_INTERFACE_MODE_MII,
158 };
159
160 static struct platform_device realview_eth_device = {
161 .name = "smsc911x",
162 .id = 0,
163 .num_resources = 2,
164 };
165
166 int realview_eth_register(const char *name, struct resource *res)
167 {
168 if (name)
169 realview_eth_device.name = name;
170 realview_eth_device.resource = res;
171 if (strcmp(realview_eth_device.name, "smsc911x") == 0)
172 realview_eth_device.dev.platform_data = &smsc911x_config;
173
174 return platform_device_register(&realview_eth_device);
175 }
176
177 struct platform_device realview_usb_device = {
178 .name = "isp1760",
179 .num_resources = 2,
180 };
181
182 int realview_usb_register(struct resource *res)
183 {
184 realview_usb_device.resource = res;
185 return platform_device_register(&realview_usb_device);
186 }
187
188 static struct pata_platform_info pata_platform_data = {
189 .ioport_shift = 1,
190 };
191
192 static struct resource pata_resources[] = {
193 [0] = {
194 .start = REALVIEW_CF_BASE,
195 .end = REALVIEW_CF_BASE + 0xff,
196 .flags = IORESOURCE_MEM,
197 },
198 [1] = {
199 .start = REALVIEW_CF_BASE + 0x100,
200 .end = REALVIEW_CF_BASE + SZ_4K - 1,
201 .flags = IORESOURCE_MEM,
202 },
203 };
204
205 struct platform_device realview_cf_device = {
206 .name = "pata_platform",
207 .id = -1,
208 .num_resources = ARRAY_SIZE(pata_resources),
209 .resource = pata_resources,
210 .dev = {
211 .platform_data = &pata_platform_data,
212 },
213 };
214
215 static struct resource realview_i2c_resource = {
216 .start = REALVIEW_I2C_BASE,
217 .end = REALVIEW_I2C_BASE + SZ_4K - 1,
218 .flags = IORESOURCE_MEM,
219 };
220
221 struct platform_device realview_i2c_device = {
222 .name = "versatile-i2c",
223 .id = 0,
224 .num_resources = 1,
225 .resource = &realview_i2c_resource,
226 };
227
228 static struct i2c_board_info realview_i2c_board_info[] = {
229 {
230 I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
231 },
232 };
233
234 static int __init realview_i2c_init(void)
235 {
236 return i2c_register_board_info(0, realview_i2c_board_info,
237 ARRAY_SIZE(realview_i2c_board_info));
238 }
239 arch_initcall(realview_i2c_init);
240
241 #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
242
243 /*
244 * This is only used if GPIOLIB support is disabled
245 */
246 static unsigned int realview_mmc_status(struct device *dev)
247 {
248 struct amba_device *adev = container_of(dev, struct amba_device, dev);
249 u32 mask;
250
251 if (adev->res.start == REALVIEW_MMCI0_BASE)
252 mask = 1;
253 else
254 mask = 2;
255
256 return readl(REALVIEW_SYSMCI) & mask;
257 }
258
259 struct mmci_platform_data realview_mmc0_plat_data = {
260 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
261 .status = realview_mmc_status,
262 .gpio_wp = 17,
263 .gpio_cd = 16,
264 };
265
266 struct mmci_platform_data realview_mmc1_plat_data = {
267 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
268 .status = realview_mmc_status,
269 .gpio_wp = 19,
270 .gpio_cd = 18,
271 };
272
273 /*
274 * Clock handling
275 */
276 static const struct icst307_params realview_oscvco_params = {
277 .ref = 24000,
278 .vco_max = 200000,
279 .vd_min = 4 + 8,
280 .vd_max = 511 + 8,
281 .rd_min = 1 + 2,
282 .rd_max = 127 + 2,
283 };
284
285 static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
286 {
287 void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
288 void __iomem *sys_osc;
289 u32 val;
290
291 if (machine_is_realview_pb1176())
292 sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
293 else
294 sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
295
296 val = readl(sys_osc) & ~0x7ffff;
297 val |= vco.v | (vco.r << 9) | (vco.s << 16);
298
299 writel(0xa05f, sys_lock);
300 writel(val, sys_osc);
301 writel(0, sys_lock);
302 }
303
304 static struct clk oscvco_clk = {
305 .params = &realview_oscvco_params,
306 .setvco = realview_oscvco_set,
307 };
308
309 /*
310 * These are fixed clocks.
311 */
312 static struct clk ref24_clk = {
313 .rate = 24000000,
314 };
315
316 static struct clk_lookup lookups[] = {
317 { /* UART0 */
318 .dev_id = "dev:uart0",
319 .clk = &ref24_clk,
320 }, { /* UART1 */
321 .dev_id = "dev:uart1",
322 .clk = &ref24_clk,
323 }, { /* UART2 */
324 .dev_id = "dev:uart2",
325 .clk = &ref24_clk,
326 }, { /* UART3 */
327 .dev_id = "fpga:uart3",
328 .clk = &ref24_clk,
329 }, { /* KMI0 */
330 .dev_id = "fpga:kmi0",
331 .clk = &ref24_clk,
332 }, { /* KMI1 */
333 .dev_id = "fpga:kmi1",
334 .clk = &ref24_clk,
335 }, { /* MMC0 */
336 .dev_id = "fpga:mmc0",
337 .clk = &ref24_clk,
338 }, { /* EB:CLCD */
339 .dev_id = "dev:clcd",
340 .clk = &oscvco_clk,
341 }, { /* PB:CLCD */
342 .dev_id = "issp:clcd",
343 .clk = &oscvco_clk,
344 }
345 };
346
347 static int __init clk_init(void)
348 {
349 clkdev_add_table(lookups, ARRAY_SIZE(lookups));
350 return 0;
351 }
352 arch_initcall(clk_init);
353
354 /*
355 * CLCD support.
356 */
357 #define SYS_CLCD_NLCDIOON (1 << 2)
358 #define SYS_CLCD_VDDPOSSWITCH (1 << 3)
359 #define SYS_CLCD_PWR3V5SWITCH (1 << 4)
360 #define SYS_CLCD_ID_MASK (0x1f << 8)
361 #define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
362 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
363 #define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
364 #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
365 #define SYS_CLCD_ID_VGA (0x1f << 8)
366
367 static struct clcd_panel vga = {
368 .mode = {
369 .name = "VGA",
370 .refresh = 60,
371 .xres = 640,
372 .yres = 480,
373 .pixclock = 39721,
374 .left_margin = 40,
375 .right_margin = 24,
376 .upper_margin = 32,
377 .lower_margin = 11,
378 .hsync_len = 96,
379 .vsync_len = 2,
380 .sync = 0,
381 .vmode = FB_VMODE_NONINTERLACED,
382 },
383 .width = -1,
384 .height = -1,
385 .tim2 = TIM2_BCD | TIM2_IPC,
386 .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
387 .bpp = 16,
388 };
389
390 static struct clcd_panel xvga = {
391 .mode = {
392 .name = "XVGA",
393 .refresh = 60,
394 .xres = 1024,
395 .yres = 768,
396 .pixclock = 15748,
397 .left_margin = 152,
398 .right_margin = 48,
399 .upper_margin = 23,
400 .lower_margin = 3,
401 .hsync_len = 104,
402 .vsync_len = 4,
403 .sync = 0,
404 .vmode = FB_VMODE_NONINTERLACED,
405 },
406 .width = -1,
407 .height = -1,
408 .tim2 = TIM2_BCD | TIM2_IPC,
409 .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
410 .bpp = 16,
411 };
412
413 static struct clcd_panel sanyo_3_8_in = {
414 .mode = {
415 .name = "Sanyo QVGA",
416 .refresh = 116,
417 .xres = 320,
418 .yres = 240,
419 .pixclock = 100000,
420 .left_margin = 6,
421 .right_margin = 6,
422 .upper_margin = 5,
423 .lower_margin = 5,
424 .hsync_len = 6,
425 .vsync_len = 6,
426 .sync = 0,
427 .vmode = FB_VMODE_NONINTERLACED,
428 },
429 .width = -1,
430 .height = -1,
431 .tim2 = TIM2_BCD,
432 .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
433 .bpp = 16,
434 };
435
436 static struct clcd_panel sanyo_2_5_in = {
437 .mode = {
438 .name = "Sanyo QVGA Portrait",
439 .refresh = 116,
440 .xres = 240,
441 .yres = 320,
442 .pixclock = 100000,
443 .left_margin = 20,
444 .right_margin = 10,
445 .upper_margin = 2,
446 .lower_margin = 2,
447 .hsync_len = 10,
448 .vsync_len = 2,
449 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
450 .vmode = FB_VMODE_NONINTERLACED,
451 },
452 .width = -1,
453 .height = -1,
454 .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC,
455 .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
456 .bpp = 16,
457 };
458
459 static struct clcd_panel epson_2_2_in = {
460 .mode = {
461 .name = "Epson QCIF",
462 .refresh = 390,
463 .xres = 176,
464 .yres = 220,
465 .pixclock = 62500,
466 .left_margin = 3,
467 .right_margin = 2,
468 .upper_margin = 1,
469 .lower_margin = 0,
470 .hsync_len = 3,
471 .vsync_len = 2,
472 .sync = 0,
473 .vmode = FB_VMODE_NONINTERLACED,
474 },
475 .width = -1,
476 .height = -1,
477 .tim2 = TIM2_BCD | TIM2_IPC,
478 .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
479 .bpp = 16,
480 };
481
482 /*
483 * Detect which LCD panel is connected, and return the appropriate
484 * clcd_panel structure. Note: we do not have any information on
485 * the required timings for the 8.4in panel, so we presently assume
486 * VGA timings.
487 */
488 static struct clcd_panel *realview_clcd_panel(void)
489 {
490 void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
491 struct clcd_panel *vga_panel;
492 struct clcd_panel *panel;
493 u32 val;
494
495 if (machine_is_realview_eb())
496 vga_panel = &vga;
497 else
498 vga_panel = &xvga;
499
500 val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
501 if (val == SYS_CLCD_ID_SANYO_3_8)
502 panel = &sanyo_3_8_in;
503 else if (val == SYS_CLCD_ID_SANYO_2_5)
504 panel = &sanyo_2_5_in;
505 else if (val == SYS_CLCD_ID_EPSON_2_2)
506 panel = &epson_2_2_in;
507 else if (val == SYS_CLCD_ID_VGA)
508 panel = vga_panel;
509 else {
510 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
511 val);
512 panel = vga_panel;
513 }
514
515 return panel;
516 }
517
518 /*
519 * Disable all display connectors on the interface module.
520 */
521 static void realview_clcd_disable(struct clcd_fb *fb)
522 {
523 void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
524 u32 val;
525
526 val = readl(sys_clcd);
527 val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
528 writel(val, sys_clcd);
529 }
530
531 /*
532 * Enable the relevant connector on the interface module.
533 */
534 static void realview_clcd_enable(struct clcd_fb *fb)
535 {
536 void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
537 u32 val;
538
539 /*
540 * Enable the PSUs
541 */
542 val = readl(sys_clcd);
543 val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
544 writel(val, sys_clcd);
545 }
546
547 static int realview_clcd_setup(struct clcd_fb *fb)
548 {
549 unsigned long framesize;
550 dma_addr_t dma;
551
552 if (machine_is_realview_eb())
553 /* VGA, 16bpp */
554 framesize = 640 * 480 * 2;
555 else
556 /* XVGA, 16bpp */
557 framesize = 1024 * 768 * 2;
558
559 fb->panel = realview_clcd_panel();
560
561 fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
562 &dma, GFP_KERNEL | GFP_DMA);
563 if (!fb->fb.screen_base) {
564 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
565 return -ENOMEM;
566 }
567
568 fb->fb.fix.smem_start = dma;
569 fb->fb.fix.smem_len = framesize;
570
571 return 0;
572 }
573
574 static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
575 {
576 return dma_mmap_writecombine(&fb->dev->dev, vma,
577 fb->fb.screen_base,
578 fb->fb.fix.smem_start,
579 fb->fb.fix.smem_len);
580 }
581
582 static void realview_clcd_remove(struct clcd_fb *fb)
583 {
584 dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
585 fb->fb.screen_base, fb->fb.fix.smem_start);
586 }
587
588 struct clcd_board clcd_plat_data = {
589 .name = "RealView",
590 .check = clcdfb_check,
591 .decode = clcdfb_decode,
592 .disable = realview_clcd_disable,
593 .enable = realview_clcd_enable,
594 .setup = realview_clcd_setup,
595 .mmap = realview_clcd_mmap,
596 .remove = realview_clcd_remove,
597 };
598
599 #ifdef CONFIG_LEDS
600 #define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
601
602 void realview_leds_event(led_event_t ledevt)
603 {
604 unsigned long flags;
605 u32 val;
606 u32 led = 1 << smp_processor_id();
607
608 local_irq_save(flags);
609 val = readl(VA_LEDS_BASE);
610
611 switch (ledevt) {
612 case led_idle_start:
613 val = val & ~led;
614 break;
615
616 case led_idle_end:
617 val = val | led;
618 break;
619
620 case led_timer:
621 val = val ^ REALVIEW_SYS_LED7;
622 break;
623
624 case led_halted:
625 val = 0;
626 break;
627
628 default:
629 break;
630 }
631
632 writel(val, VA_LEDS_BASE);
633 local_irq_restore(flags);
634 }
635 #endif /* CONFIG_LEDS */
636
637 /*
638 * Where is the timer (VA)?
639 */
640 void __iomem *timer0_va_base;
641 void __iomem *timer1_va_base;
642 void __iomem *timer2_va_base;
643 void __iomem *timer3_va_base;
644
645 /*
646 * How long is the timer interval?
647 */
648 #define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
649 #if TIMER_INTERVAL >= 0x100000
650 #define TIMER_RELOAD (TIMER_INTERVAL >> 8)
651 #define TIMER_DIVISOR (TIMER_CTRL_DIV256)
652 #define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
653 #elif TIMER_INTERVAL >= 0x10000
654 #define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
655 #define TIMER_DIVISOR (TIMER_CTRL_DIV16)
656 #define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
657 #else
658 #define TIMER_RELOAD (TIMER_INTERVAL)
659 #define TIMER_DIVISOR (TIMER_CTRL_DIV1)
660 #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
661 #endif
662
663 static void timer_set_mode(enum clock_event_mode mode,
664 struct clock_event_device *clk)
665 {
666 unsigned long ctrl;
667
668 switch(mode) {
669 case CLOCK_EVT_MODE_PERIODIC:
670 writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD);
671
672 ctrl = TIMER_CTRL_PERIODIC;
673 ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
674 break;
675 case CLOCK_EVT_MODE_ONESHOT:
676 /* period set, and timer enabled in 'next_event' hook */
677 ctrl = TIMER_CTRL_ONESHOT;
678 ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
679 break;
680 case CLOCK_EVT_MODE_UNUSED:
681 case CLOCK_EVT_MODE_SHUTDOWN:
682 default:
683 ctrl = 0;
684 }
685
686 writel(ctrl, timer0_va_base + TIMER_CTRL);
687 }
688
689 static int timer_set_next_event(unsigned long evt,
690 struct clock_event_device *unused)
691 {
692 unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL);
693
694 writel(evt, timer0_va_base + TIMER_LOAD);
695 writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL);
696
697 return 0;
698 }
699
700 static struct clock_event_device timer0_clockevent = {
701 .name = "timer0",
702 .shift = 32,
703 .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
704 .set_mode = timer_set_mode,
705 .set_next_event = timer_set_next_event,
706 .rating = 300,
707 .cpumask = cpu_all_mask,
708 };
709
710 static void __init realview_clockevents_init(unsigned int timer_irq)
711 {
712 timer0_clockevent.irq = timer_irq;
713 timer0_clockevent.mult =
714 div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
715 timer0_clockevent.max_delta_ns =
716 clockevent_delta2ns(0xffffffff, &timer0_clockevent);
717 timer0_clockevent.min_delta_ns =
718 clockevent_delta2ns(0xf, &timer0_clockevent);
719
720 clockevents_register_device(&timer0_clockevent);
721 }
722
723 /*
724 * IRQ handler for the timer
725 */
726 static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
727 {
728 struct clock_event_device *evt = &timer0_clockevent;
729
730 /* clear the interrupt */
731 writel(1, timer0_va_base + TIMER_INTCLR);
732
733 evt->event_handler(evt);
734
735 return IRQ_HANDLED;
736 }
737
738 static struct irqaction realview_timer_irq = {
739 .name = "RealView Timer Tick",
740 .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
741 .handler = realview_timer_interrupt,
742 };
743
744 static cycle_t realview_get_cycles(struct clocksource *cs)
745 {
746 return ~readl(timer3_va_base + TIMER_VALUE);
747 }
748
749 static struct clocksource clocksource_realview = {
750 .name = "timer3",
751 .rating = 200,
752 .read = realview_get_cycles,
753 .mask = CLOCKSOURCE_MASK(32),
754 .shift = 20,
755 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
756 };
757
758 static void __init realview_clocksource_init(void)
759 {
760 /* setup timer 0 as free-running clocksource */
761 writel(0, timer3_va_base + TIMER_CTRL);
762 writel(0xffffffff, timer3_va_base + TIMER_LOAD);
763 writel(0xffffffff, timer3_va_base + TIMER_VALUE);
764 writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
765 timer3_va_base + TIMER_CTRL);
766
767 clocksource_realview.mult =
768 clocksource_khz2mult(1000, clocksource_realview.shift);
769 clocksource_register(&clocksource_realview);
770 }
771
772 /*
773 * Set up the clock source and clock events devices
774 */
775 void __init realview_timer_init(unsigned int timer_irq)
776 {
777 u32 val;
778
779 /*
780 * set clock frequency:
781 * REALVIEW_REFCLK is 32KHz
782 * REALVIEW_TIMCLK is 1MHz
783 */
784 val = readl(__io_address(REALVIEW_SCTL_BASE));
785 writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
786 (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) |
787 (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
788 (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
789 __io_address(REALVIEW_SCTL_BASE));
790
791 /*
792 * Initialise to a known state (all timers off)
793 */
794 writel(0, timer0_va_base + TIMER_CTRL);
795 writel(0, timer1_va_base + TIMER_CTRL);
796 writel(0, timer2_va_base + TIMER_CTRL);
797 writel(0, timer3_va_base + TIMER_CTRL);
798
799 /*
800 * Make irqs happen for the system timer
801 */
802 setup_irq(timer_irq, &realview_timer_irq);
803
804 realview_clocksource_init();
805 realview_clockevents_init(timer_irq);
806 }
807
808 /*
809 * Setup the memory banks.
810 */
811 void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from,
812 struct meminfo *meminfo)
813 {
814 /*
815 * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
816 * Half of this is mirrored at 0.
817 */
818 #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
819 meminfo->bank[0].start = 0x70000000;
820 meminfo->bank[0].size = SZ_512M;
821 meminfo->nr_banks = 1;
822 #else
823 meminfo->bank[0].start = 0;
824 meminfo->bank[0].size = SZ_256M;
825 meminfo->nr_banks = 1;
826 #endif
827 }
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree