arch/arm/mach-bcmring/core.c

   1 /*
   2  *  derived from linux/arch/arm/mach-versatile/core.c
   3  *  linux/arch/arm/mach-bcmring/core.c
   4  *
   5  *  Copyright (C) 1999 - 2003 ARM Limited
   6  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21  */
  22 /* Portions copyright Broadcom 2008 */
  23
  24 #include <linux/init.h>
  25 #include <linux/device.h>
  26 #include <linux/dma-mapping.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/sysdev.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/amba/bus.h>
  31 #include <linux/clocksource.h>
  32 #include <linux/clockchips.h>
  33
  34 #include <mach/csp/mm_addr.h>
  35 #include <mach/hardware.h>
  36 #include <asm/clkdev.h>
  37 #include <linux/io.h>
  38 #include <asm/irq.h>
  39 #include <asm/hardware/arm_timer.h>
  40 #include <asm/mach-types.h>
  41
  42 #include <asm/mach/arch.h>
  43 #include <asm/mach/flash.h>
  44 #include <asm/mach/irq.h>
  45 #include <asm/mach/time.h>
  46 #include <asm/mach/map.h>
  47
  48 #include <cfg_global.h>
  49
  50 #include "clock.h"
  51
  52 #include <csp/secHw.h>
  53 #include <mach/csp/secHw_def.h>
  54 #include <mach/csp/chipcHw_inline.h>
  55 #include <mach/csp/tmrHw_reg.h>
  56
  57 #define AMBA_DEVICE(name, initname, base, plat, size)       \
  58 static struct amba_device name##_device = {     \
  59    .dev = {                                     \
  60       .coherent_dma_mask = ~0,                  \
  61       .init_name = initname,                    \
  62       .platform_data = plat                     \
  63    },                                           \
  64    .res = {                                     \
  65       .start = MM_ADDR_IO_##base,               \
  66                 .end = MM_ADDR_IO_##base + (size) - 1,    \
  67       .flags = IORESOURCE_MEM                   \
  68    },                                           \
  69    .dma_mask = ~0,                              \
  70    .irq = {                                     \
  71       IRQ_##base                                \
  72    }                                            \
  73 }
  74
  75
  76 AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
  77 AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
  78
  79 static struct clk pll1_clk = {
  80         .name = "PLL1",
  81         .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
  82         .rate_hz = 2000000000,
  83         .use_cnt = 7,
  84 };
  85
  86 static struct clk uart_clk = {
  87         .name = "UART",
  88         .type = CLK_TYPE_PROGRAMMABLE,
  89         .csp_id = chipcHw_CLOCK_UART,
  90         .rate_hz = HW_CFG_UART_CLK_HZ,
  91         .parent = &pll1_clk,
  92 };
  93
  94 static struct clk_lookup lookups[] = {
  95         {                       /* UART0 */
  96          .dev_id = "uarta",
  97          .clk = &uart_clk,
  98          }, {                   /* UART1 */
  99              .dev_id = "uartb",
 100              .clk = &uart_clk,
 101              }
 102 };
 103
 104 static struct amba_device *amba_devs[] __initdata = {
 105         &uartA_device,
 106         &uartB_device,
 107 };
 108
 109 void __init bcmring_amba_init(void)
 110 {
 111         int i;
 112         u32 bus_clock;
 113
 114 /* Linux is run initially in non-secure mode. Secure peripherals */
 115 /* generate FIQ, and must be handled in secure mode. Until we have */
 116 /* a linux security monitor implementation, keep everything in */
 117 /* non-secure mode. */
 118         chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
 119         secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
 120                           secHw_BLK_MASK_KEY_SCAN |
 121                           secHw_BLK_MASK_TOUCH_SCREEN |
 122                           secHw_BLK_MASK_UART0 |
 123                           secHw_BLK_MASK_UART1 |
 124                           secHw_BLK_MASK_WATCHDOG |
 125                           secHw_BLK_MASK_SPUM |
 126                           secHw_BLK_MASK_DDR2 |
 127                           secHw_BLK_MASK_SPU |
 128                           secHw_BLK_MASK_PKA |
 129                           secHw_BLK_MASK_RNG |
 130                           secHw_BLK_MASK_RTC |
 131                           secHw_BLK_MASK_OTP |
 132                           secHw_BLK_MASK_BOOT |
 133                           secHw_BLK_MASK_MPU |
 134                           secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
 135
 136         /* Only the devices attached to the AMBA bus are enabled just before the bus is */
 137         /* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
 138         /* driver to access these blocks. The bus is probed, and the drivers are loaded. */
 139         /* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
 140         bus_clock = chipcHw_REG_BUS_CLOCK_GE
 141             | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
 142
 143         chipcHw_busInterfaceClockEnable(bus_clock);
 144
 145         clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 146
 147         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 148                 struct amba_device *d = amba_devs[i];
 149                 amba_device_register(d, &iomem_resource);
 150         }
 151 }
 152
 153 /*
 154  * Where is the timer (VA)?
 155  */
 156 #define TIMER0_VA_BASE           MM_IO_BASE_TMR
 157 #define TIMER1_VA_BASE          (MM_IO_BASE_TMR + 0x20)
 158 #define TIMER2_VA_BASE          (MM_IO_BASE_TMR + 0x40)
 159 #define TIMER3_VA_BASE          (MM_IO_BASE_TMR + 0x60)
 160
 161 /* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
 162 #if defined(CONFIG_ARCH_FPGA11107)
 163 /* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
 164 /* slow down Linux's sense of time */
 165 #define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
 166 #define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
 167 #define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
 168 #define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
 169 #else
 170 #define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
 171 #define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
 172 #define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
 173 #define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
 174 #endif
 175
 176 #define TICKS_PER_uSEC     TIMER0_FREQUENCY_MHZ
 177
 178 /*
 179  *  These are useconds NOT ticks.
 180  *
 181  */
 182 #define mSEC_1                          1000
 183 #define mSEC_5                          (mSEC_1 * 5)
 184 #define mSEC_10                         (mSEC_1 * 10)
 185 #define mSEC_25                         (mSEC_1 * 25)
 186 #define SEC_1                           (mSEC_1 * 1000)
 187
 188 /*
 189  * How long is the timer interval?
 190  */
 191 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
 192 #if TIMER_INTERVAL >= 0x100000
 193 #define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
 194 #define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
 195 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
 196 #elif TIMER_INTERVAL >= 0x10000
 197 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)   /* Divide by 16 */
 198 #define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
 199 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
 200 #else
 201 #define TIMER_RELOAD    (TIMER_INTERVAL)
 202 #define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
 203 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 204 #endif
 205
 206 static void timer_set_mode(enum clock_event_mode mode,
 207                            struct clock_event_device *clk)
 208 {
 209         unsigned long ctrl;
 210
 211         switch (mode) {
 212         case CLOCK_EVT_MODE_PERIODIC:
 213                 writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
 214
 215                 ctrl = TIMER_CTRL_PERIODIC;
 216                 ctrl |=
 217                     TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
 218                     TIMER_CTRL_ENABLE;
 219                 break;
 220         case CLOCK_EVT_MODE_ONESHOT:
 221                 /* period set, and timer enabled in 'next_event' hook */
 222                 ctrl = TIMER_CTRL_ONESHOT;
 223                 ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
 224                 break;
 225         case CLOCK_EVT_MODE_UNUSED:
 226         case CLOCK_EVT_MODE_SHUTDOWN:
 227         default:
 228                 ctrl = 0;
 229         }
 230
 231         writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
 232 }
 233
 234 static int timer_set_next_event(unsigned long evt,
 235                                 struct clock_event_device *unused)
 236 {
 237         unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
 238
 239         writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
 240         writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
 241
 242         return 0;
 243 }
 244
 245 static struct clock_event_device timer0_clockevent = {
 246         .name = "timer0",
 247         .shift = 32,
 248         .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 249         .set_mode = timer_set_mode,
 250         .set_next_event = timer_set_next_event,
 251 };
 252
 253 /*
 254  * IRQ handler for the timer
 255  */
 256 static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
 257 {
 258         struct clock_event_device *evt = &timer0_clockevent;
 259
 260         writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
 261
 262         evt->event_handler(evt);
 263
 264         return IRQ_HANDLED;
 265 }
 266
 267 static struct irqaction bcmring_timer_irq = {
 268         .name = "bcmring Timer Tick",
 269         .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 270         .handler = bcmring_timer_interrupt,
 271 };
 272
 273 static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
 274 {
 275         return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
 276 }
 277
 278 static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
 279 {
 280         return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 281 }
 282
 283 static struct clocksource clocksource_bcmring_timer1 = {
 284         .name = "timer1",
 285         .rating = 200,
 286         .read = bcmring_get_cycles_timer1,
 287         .mask = CLOCKSOURCE_MASK(32),
 288         .shift = 20,
 289         .flags = CLOCK_SOURCE_IS_CONTINUOUS,
 290 };
 291
 292 static struct clocksource clocksource_bcmring_timer3 = {
 293         .name = "timer3",
 294         .rating = 100,
 295         .read = bcmring_get_cycles_timer3,
 296         .mask = CLOCKSOURCE_MASK(32),
 297         .shift = 20,
 298         .flags = CLOCK_SOURCE_IS_CONTINUOUS,
 299 };
 300
 301 static int __init bcmring_clocksource_init(void)
 302 {
 303         /* setup timer1 as free-running clocksource */
 304         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 305         writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
 306         writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
 307         writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
 308                TIMER1_VA_BASE + TIMER_CTRL);
 309
 310         clocksource_bcmring_timer1.mult =
 311             clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
 312                                  clocksource_bcmring_timer1.shift);
 313         clocksource_register(&clocksource_bcmring_timer1);
 314
 315         /* setup timer3 as free-running clocksource */
 316         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 317         writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
 318         writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
 319         writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
 320                TIMER3_VA_BASE + TIMER_CTRL);
 321
 322         clocksource_bcmring_timer3.mult =
 323             clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
 324                                  clocksource_bcmring_timer3.shift);
 325         clocksource_register(&clocksource_bcmring_timer3);
 326
 327         return 0;
 328 }
 329
 330 /*
 331  * Set up timer interrupt, and return the current time in seconds.
 332  */
 333 void __init bcmring_init_timer(void)
 334 {
 335         printk(KERN_INFO "bcmring_init_timer\n");
 336         /*
 337          * Initialise to a known state (all timers off)
 338          */
 339         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 340         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 341         writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 342         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 343
 344         /*
 345          * Make irqs happen for the system timer
 346          */
 347         setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
 348
 349         bcmring_clocksource_init();
 350
 351         timer0_clockevent.mult =
 352             div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
 353         timer0_clockevent.max_delta_ns =
 354             clockevent_delta2ns(0xffffffff, &timer0_clockevent);
 355         timer0_clockevent.min_delta_ns =
 356             clockevent_delta2ns(0xf, &timer0_clockevent);
 357
 358         timer0_clockevent.cpumask = cpumask_of(0);
 359         clockevents_register_device(&timer0_clockevent);
 360 }
 361
 362 struct sys_timer bcmring_timer = {
 363         .init = bcmring_init_timer,
 364 };