?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
cris: autoconvert trivial BKL users
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / cris / arch-v10 / drivers / sync_serial.c
blob3d9fa074a941ff129cd3a500a6e4f78df18bd244
1 /*
2 * Simple synchronous serial port driver for ETRAX 100LX.
3 *
4 * Synchronous serial ports are used for continuous streamed data like audio.
5 * The default setting for this driver is compatible with the STA 013 MP3
6 * decoder. The driver can easily be tuned to fit other audio encoder/decoders
7 * and SPI
8 *
9 * Copyright (c) 2001-2008 Axis Communications AB
10 *
11 * Author: Mikael Starvik, Johan Adolfsson
12 *
13 */
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/types.h>
17 #include <linux/errno.h>
18 #include <linux/major.h>
19 #include <linux/sched.h>
20 #include <linux/interrupt.h>
21 #include <linux/poll.h>
22 #include <linux/init.h>
23 #include <linux/mutex.h>
24 #include <linux/timer.h>
25 #include <asm/irq.h>
26 #include <asm/dma.h>
27 #include <asm/io.h>
28 #include <arch/svinto.h>
29 #include <asm/uaccess.h>
30 #include <asm/system.h>
31 #include <asm/sync_serial.h>
32 #include <arch/io_interface_mux.h>
33
34 /* The receiver is a bit tricky beacuse of the continuous stream of data.*/
35 /* */
36 /* Three DMA descriptors are linked together. Each DMA descriptor is */
37 /* responsible for port->bufchunk of a common buffer. */
38 /* */
39 /* +---------------------------------------------+ */
40 /* | +----------+ +----------+ +----------+ | */
41 /* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */
42 /* +----------+ +----------+ +----------+ */
43 /* | | | */
44 /* v v v */
45 /* +-------------------------------------+ */
46 /* | BUFFER | */
47 /* +-------------------------------------+ */
48 /* |<- data_avail ->| */
49 /* readp writep */
50 /* */
51 /* If the application keeps up the pace readp will be right after writep.*/
52 /* If the application can't keep the pace we have to throw away data. */
53 /* The idea is that readp should be ready with the data pointed out by */
54 /* Descr[i] when the DMA has filled in Descr[i+1]. */
55 /* Otherwise we will discard */
56 /* the rest of the data pointed out by Descr1 and set readp to the start */
57 /* of Descr2 */
58
59 #define SYNC_SERIAL_MAJOR 125
60
61 /* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */
62 /* words can be handled */
63 #define IN_BUFFER_SIZE 12288
64 #define IN_DESCR_SIZE 256
65 #define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE)
66 #define OUT_BUFFER_SIZE 4096
67
68 #define DEFAULT_FRAME_RATE 0
69 #define DEFAULT_WORD_RATE 7
70
71 /* NOTE: Enabling some debug will likely cause overrun or underrun,
72 * especially if manual mode is use.
73 */
74 #define DEBUG(x)
75 #define DEBUGREAD(x)
76 #define DEBUGWRITE(x)
77 #define DEBUGPOLL(x)
78 #define DEBUGRXINT(x)
79 #define DEBUGTXINT(x)
80
81 /* Define some macros to access ETRAX 100 registers */
82 #define SETF(var, reg, field, val) \
83 do { \
84 var = (var & ~IO_MASK_(reg##_, field##_)) | \
85 IO_FIELD_(reg##_, field##_, val); \
86 } while (0)
87
88 #define SETS(var, reg, field, val) \
89 do { \
90 var = (var & ~IO_MASK_(reg##_, field##_)) | \
91 IO_STATE_(reg##_, field##_, _##val); \
92 } while (0)
93
94 struct sync_port {
95 /* Etrax registers and bits*/
96 const volatile unsigned *const status;
97 volatile unsigned *const ctrl_data;
98 volatile unsigned *const output_dma_first;
99 volatile unsigned char *const output_dma_cmd;
100 volatile unsigned char *const output_dma_clr_irq;
101 volatile unsigned *const input_dma_first;
102 volatile unsigned char *const input_dma_cmd;
103 volatile unsigned *const input_dma_descr;
104 /* 8*4 */
105 volatile unsigned char *const input_dma_clr_irq;
106 volatile unsigned *const data_out;
107 const volatile unsigned *const data_in;
108 char data_avail_bit; /* In R_IRQ_MASK1_RD/SET/CLR */
109 char transmitter_ready_bit; /* In R_IRQ_MASK1_RD/SET/CLR */
110 char input_dma_descr_bit; /* In R_IRQ_MASK2_RD */
111
112 char output_dma_bit; /* In R_IRQ_MASK2_RD */
113 /* End of fields initialised in array */
114 char started; /* 1 if port has been started */
115 char port_nbr; /* Port 0 or 1 */
116 char busy; /* 1 if port is busy */
117
118 char enabled; /* 1 if port is enabled */
119 char use_dma; /* 1 if port uses dma */
120 char tr_running;
121
122 char init_irqs;
123
124 /* Register shadow */
125 unsigned int ctrl_data_shadow;
126 /* Remaining bytes for current transfer */
127 volatile unsigned int out_count;
128 /* Current position in out_buffer */
129 unsigned char *outp;
130 /* 16*4 */
131 /* Next byte to be read by application */
132 volatile unsigned char *volatile readp;
133 /* Next byte to be written by etrax */
134 volatile unsigned char *volatile writep;
135
136 unsigned int in_buffer_size;
137 unsigned int inbufchunk;
138 struct etrax_dma_descr out_descr __attribute__ ((aligned(32)));
139 struct etrax_dma_descr in_descr[NUM_IN_DESCR] __attribute__ ((aligned(32)));
140 unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32)));
141 unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32)));
142 unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32)));
143 struct etrax_dma_descr *next_rx_desc;
144 struct etrax_dma_descr *prev_rx_desc;
145 int full;
146
147 wait_queue_head_t out_wait_q;
148 wait_queue_head_t in_wait_q;
149 };
150
151
152 static DEFINE_MUTEX(sync_serial_mutex);
153 static int etrax_sync_serial_init(void);
154 static void initialize_port(int portnbr);
155 static inline int sync_data_avail(struct sync_port *port);
156
157 static int sync_serial_open(struct inode *inode, struct file *file);
158 static int sync_serial_release(struct inode *inode, struct file *file);
159 static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
160
161 static int sync_serial_ioctl(struct file *file,
162 unsigned int cmd, unsigned long arg);
163 static ssize_t sync_serial_write(struct file *file, const char *buf,
164 size_t count, loff_t *ppos);
165 static ssize_t sync_serial_read(struct file *file, char *buf,
166 size_t count, loff_t *ppos);
167
168 #if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
169 defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
170 (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
171 defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)))
172 #define SYNC_SER_DMA
173 #endif
174
175 static void send_word(struct sync_port *port);
176 static void start_dma(struct sync_port *port, const char *data, int count);
177 static void start_dma_in(struct sync_port *port);
178 #ifdef SYNC_SER_DMA
179 static irqreturn_t tr_interrupt(int irq, void *dev_id);
180 static irqreturn_t rx_interrupt(int irq, void *dev_id);
181 #endif
182 #if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
183 !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
184 (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
185 !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)))
186 #define SYNC_SER_MANUAL
187 #endif
188 #ifdef SYNC_SER_MANUAL
189 static irqreturn_t manual_interrupt(int irq, void *dev_id);
190 #endif
191
192 /* The ports */
193 static struct sync_port ports[] = {
194 {
195 .status = R_SYNC_SERIAL1_STATUS,
196 .ctrl_data = R_SYNC_SERIAL1_CTRL,
197 .output_dma_first = R_DMA_CH8_FIRST,
198 .output_dma_cmd = R_DMA_CH8_CMD,
199 .output_dma_clr_irq = R_DMA_CH8_CLR_INTR,
200 .input_dma_first = R_DMA_CH9_FIRST,
201 .input_dma_cmd = R_DMA_CH9_CMD,
202 .input_dma_descr = R_DMA_CH9_DESCR,
203 .input_dma_clr_irq = R_DMA_CH9_CLR_INTR,
204 .data_out = R_SYNC_SERIAL1_TR_DATA,
205 .data_in = R_SYNC_SERIAL1_REC_DATA,
206 .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_data),
207 .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_ready),
208 .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma9_descr),
209 .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma8_eop),
210 .init_irqs = 1,
211 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
212 .use_dma = 1,
213 #else
214 .use_dma = 0,
215 #endif
216 },
217 {
218 .status = R_SYNC_SERIAL3_STATUS,
219 .ctrl_data = R_SYNC_SERIAL3_CTRL,
220 .output_dma_first = R_DMA_CH4_FIRST,
221 .output_dma_cmd = R_DMA_CH4_CMD,
222 .output_dma_clr_irq = R_DMA_CH4_CLR_INTR,
223 .input_dma_first = R_DMA_CH5_FIRST,
224 .input_dma_cmd = R_DMA_CH5_CMD,
225 .input_dma_descr = R_DMA_CH5_DESCR,
226 .input_dma_clr_irq = R_DMA_CH5_CLR_INTR,
227 .data_out = R_SYNC_SERIAL3_TR_DATA,
228 .data_in = R_SYNC_SERIAL3_REC_DATA,
229 .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_data),
230 .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_ready),
231 .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma5_descr),
232 .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma4_eop),
233 .init_irqs = 1,
234 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
235 .use_dma = 1,
236 #else
237 .use_dma = 0,
238 #endif
239 }
240 };
241
242 /* Register shadows */
243 static unsigned sync_serial_prescale_shadow;
244
245 #define NUMBER_OF_PORTS 2
246
247 static const struct file_operations sync_serial_fops = {
248 .owner = THIS_MODULE,
249 .write = sync_serial_write,
250 .read = sync_serial_read,
251 .poll = sync_serial_poll,
252 .unlocked_ioctl = sync_serial_ioctl,
253 .open = sync_serial_open,
254 .release = sync_serial_release
255 };
256
257 static int __init etrax_sync_serial_init(void)
258 {
259 ports[0].enabled = 0;
260 ports[1].enabled = 0;
261
262 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
263 if (cris_request_io_interface(if_sync_serial_1, "sync_ser1")) {
264 printk(KERN_CRIT "ETRAX100LX sync_serial: "
265 "Could not allocate IO group for port %d\n", 0);
266 return -EBUSY;
267 }
268 #endif
269 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
270 if (cris_request_io_interface(if_sync_serial_3, "sync_ser3")) {
271 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
272 cris_free_io_interface(if_sync_serial_1);
273 #endif
274 printk(KERN_CRIT "ETRAX100LX sync_serial: "
275 "Could not allocate IO group for port %d\n", 1);
276 return -EBUSY;
277 }
278 #endif
279
280 if (register_chrdev(SYNC_SERIAL_MAJOR, "sync serial",
281 &sync_serial_fops) < 0) {
282 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
283 cris_free_io_interface(if_sync_serial_3);
284 #endif
285 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
286 cris_free_io_interface(if_sync_serial_1);
287 #endif
288 printk("unable to get major for synchronous serial port\n");
289 return -EBUSY;
290 }
291
292 /* Deselect synchronous serial ports while configuring. */
293 SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async);
294 SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async);
295 *R_GEN_CONFIG_II = gen_config_ii_shadow;
296
297 /* Initialize Ports */
298 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
299 ports[0].enabled = 1;
300 SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser1, ss1extra);
301 SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync);
302 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
303 ports[0].use_dma = 1;
304 #else
305 ports[0].use_dma = 0;
306 #endif
307 initialize_port(0);
308 #endif
309
310 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
311 ports[1].enabled = 1;
312 SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser3, ss3extra);
313 SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync);
314 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
315 ports[1].use_dma = 1;
316 #else
317 ports[1].use_dma = 0;
318 #endif
319 initialize_port(1);
320 #endif
321
322 *R_PORT_PB_I2C = port_pb_i2c_shadow; /* Use PB4/PB7 */
323
324 /* Set up timing */
325 *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow = (
326 IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec) |
327 IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u1, external) |
328 IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec) |
329 IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u3, external) |
330 IO_STATE(R_SYNC_SERIAL_PRESCALE, prescaler, div4) |
331 IO_FIELD(R_SYNC_SERIAL_PRESCALE, frame_rate,
332 DEFAULT_FRAME_RATE) |
333 IO_FIELD(R_SYNC_SERIAL_PRESCALE, word_rate, DEFAULT_WORD_RATE) |
334 IO_STATE(R_SYNC_SERIAL_PRESCALE, warp_mode, normal));
335
336 /* Select synchronous ports */
337 *R_GEN_CONFIG_II = gen_config_ii_shadow;
338
339 printk(KERN_INFO "ETRAX 100LX synchronous serial port driver\n");
340 return 0;
341 }
342
343 static void __init initialize_port(int portnbr)
344 {
345 struct sync_port *port = &ports[portnbr];
346
347 DEBUG(printk(KERN_DEBUG "Init sync serial port %d\n", portnbr));
348
349 port->started = 0;
350 port->port_nbr = portnbr;
351 port->busy = 0;
352 port->tr_running = 0;
353
354 port->out_count = 0;
355 port->outp = port->out_buffer;
356
357 port->readp = port->flip;
358 port->writep = port->flip;
359 port->in_buffer_size = IN_BUFFER_SIZE;
360 port->inbufchunk = IN_DESCR_SIZE;
361 port->next_rx_desc = &port->in_descr[0];
362 port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1];
363 port->prev_rx_desc->ctrl = d_eol;
364
365 init_waitqueue_head(&port->out_wait_q);
366 init_waitqueue_head(&port->in_wait_q);
367
368 port->ctrl_data_shadow =
369 IO_STATE(R_SYNC_SERIAL1_CTRL, tr_baud, c115k2Hz) |
370 IO_STATE(R_SYNC_SERIAL1_CTRL, mode, master_output) |
371 IO_STATE(R_SYNC_SERIAL1_CTRL, error, ignore) |
372 IO_STATE(R_SYNC_SERIAL1_CTRL, rec_enable, disable) |
373 IO_STATE(R_SYNC_SERIAL1_CTRL, f_synctype, normal) |
374 IO_STATE(R_SYNC_SERIAL1_CTRL, f_syncsize, word) |
375 IO_STATE(R_SYNC_SERIAL1_CTRL, f_sync, on) |
376 IO_STATE(R_SYNC_SERIAL1_CTRL, clk_mode, normal) |
377 IO_STATE(R_SYNC_SERIAL1_CTRL, clk_halt, stopped) |
378 IO_STATE(R_SYNC_SERIAL1_CTRL, bitorder, msb) |
379 IO_STATE(R_SYNC_SERIAL1_CTRL, tr_enable, disable) |
380 IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit) |
381 IO_STATE(R_SYNC_SERIAL1_CTRL, buf_empty, lmt_8) |
382 IO_STATE(R_SYNC_SERIAL1_CTRL, buf_full, lmt_8) |
383 IO_STATE(R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled) |
384 IO_STATE(R_SYNC_SERIAL1_CTRL, clk_polarity, neg) |
385 IO_STATE(R_SYNC_SERIAL1_CTRL, frame_polarity, normal)|
386 IO_STATE(R_SYNC_SERIAL1_CTRL, status_polarity, inverted)|
387 IO_STATE(R_SYNC_SERIAL1_CTRL, clk_driver, normal) |
388 IO_STATE(R_SYNC_SERIAL1_CTRL, frame_driver, normal) |
389 IO_STATE(R_SYNC_SERIAL1_CTRL, status_driver, normal)|
390 IO_STATE(R_SYNC_SERIAL1_CTRL, def_out0, high);
391
392 if (port->use_dma)
393 port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL,
394 dma_enable, on);
395 else
396 port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL,
397 dma_enable, off);
398
399 *port->ctrl_data = port->ctrl_data_shadow;
400 }
401
402 static inline int sync_data_avail(struct sync_port *port)
403 {
404 int avail;
405 unsigned char *start;
406 unsigned char *end;
407
408 start = (unsigned char *)port->readp; /* cast away volatile */
409 end = (unsigned char *)port->writep; /* cast away volatile */
410 /* 0123456789 0123456789
411 * ----- - -----
412 * ^rp ^wp ^wp ^rp
413 */
414 if (end >= start)
415 avail = end - start;
416 else
417 avail = port->in_buffer_size - (start - end);
418 return avail;
419 }
420
421 static inline int sync_data_avail_to_end(struct sync_port *port)
422 {
423 int avail;
424 unsigned char *start;
425 unsigned char *end;
426
427 start = (unsigned char *)port->readp; /* cast away volatile */
428 end = (unsigned char *)port->writep; /* cast away volatile */
429 /* 0123456789 0123456789
430 * ----- -----
431 * ^rp ^wp ^wp ^rp
432 */
433
434 if (end >= start)
435 avail = end - start;
436 else
437 avail = port->flip + port->in_buffer_size - start;
438 return avail;
439 }
440
441
442 static int sync_serial_open(struct inode *inode, struct file *file)
443 {
444 int dev = MINOR(inode->i_rdev);
445 struct sync_port *port;
446 int mode;
447 int err = -EBUSY;
448
449 mutex_lock(&sync_serial_mutex);
450 DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev));
451
452 if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
453 DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
454 err = -ENODEV;
455 goto out;
456 }
457 port = &ports[dev];
458 /* Allow open this device twice (assuming one reader and one writer) */
459 if (port->busy == 2) {
460 DEBUG(printk(KERN_DEBUG "Device is busy.. \n"));
461 goto out;
462 }
463 if (port->init_irqs) {
464 if (port->use_dma) {
465 if (port == &ports[0]) {
466 #ifdef SYNC_SER_DMA
467 if (request_irq(24, tr_interrupt, 0,
468 "synchronous serial 1 dma tr",
469 &ports[0])) {
470 printk(KERN_CRIT "Can't alloc "
471 "sync serial port 1 IRQ");
472 goto out;
473 } else if (request_irq(25, rx_interrupt, 0,
474 "synchronous serial 1 dma rx",
475 &ports[0])) {
476 free_irq(24, &port[0]);
477 printk(KERN_CRIT "Can't alloc "
478 "sync serial port 1 IRQ");
479 goto out;
480 } else if (cris_request_dma(8,
481 "synchronous serial 1 dma tr",
482 DMA_VERBOSE_ON_ERROR,
483 dma_ser1)) {
484 free_irq(24, &port[0]);
485 free_irq(25, &port[0]);
486 printk(KERN_CRIT "Can't alloc "
487 "sync serial port 1 "
488 "TX DMA channel");
489 goto out;
490 } else if (cris_request_dma(9,
491 "synchronous serial 1 dma rec",
492 DMA_VERBOSE_ON_ERROR,
493 dma_ser1)) {
494 cris_free_dma(8, NULL);
495 free_irq(24, &port[0]);
496 free_irq(25, &port[0]);
497 printk(KERN_CRIT "Can't alloc "
498 "sync serial port 1 "
499 "RX DMA channel");
500 goto out;
501 }
502 #endif
503 RESET_DMA(8); WAIT_DMA(8);
504 RESET_DMA(9); WAIT_DMA(9);
505 *R_DMA_CH8_CLR_INTR =
506 IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop,
507 do) |
508 IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr,
509 do);
510 *R_DMA_CH9_CLR_INTR =
511 IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop,
512 do) |
513 IO_STATE(R_DMA_CH9_CLR_INTR, clr_descr,
514 do);
515 *R_IRQ_MASK2_SET =
516 IO_STATE(R_IRQ_MASK2_SET, dma8_eop,
517 set) |
518 IO_STATE(R_IRQ_MASK2_SET, dma9_descr,
519 set);
520 } else if (port == &ports[1]) {
521 #ifdef SYNC_SER_DMA
522 if (request_irq(20, tr_interrupt, 0,
523 "synchronous serial 3 dma tr",
524 &ports[1])) {
525 printk(KERN_CRIT "Can't alloc "
526 "sync serial port 3 IRQ");
527 goto out;
528 } else if (request_irq(21, rx_interrupt, 0,
529 "synchronous serial 3 dma rx",
530 &ports[1])) {
531 free_irq(20, &ports[1]);
532 printk(KERN_CRIT "Can't alloc "
533 "sync serial port 3 IRQ");
534 goto out;
535 } else if (cris_request_dma(4,
536 "synchronous serial 3 dma tr",
537 DMA_VERBOSE_ON_ERROR,
538 dma_ser3)) {
539 free_irq(21, &ports[1]);
540 free_irq(20, &ports[1]);
541 printk(KERN_CRIT "Can't alloc "
542 "sync serial port 3 "
543 "TX DMA channel");
544 goto out;
545 } else if (cris_request_dma(5,
546 "synchronous serial 3 dma rec",
547 DMA_VERBOSE_ON_ERROR,
548 dma_ser3)) {
549 cris_free_dma(4, NULL);
550 free_irq(21, &ports[1]);
551 free_irq(20, &ports[1]);
552 printk(KERN_CRIT "Can't alloc "
553 "sync serial port 3 "
554 "RX DMA channel");
555 goto out;
556 }
557 #endif
558 RESET_DMA(4); WAIT_DMA(4);
559 RESET_DMA(5); WAIT_DMA(5);
560 *R_DMA_CH4_CLR_INTR =
561 IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop,
562 do) |
563 IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr,
564 do);
565 *R_DMA_CH5_CLR_INTR =
566 IO_STATE(R_DMA_CH5_CLR_INTR, clr_eop,
567 do) |
568 IO_STATE(R_DMA_CH5_CLR_INTR, clr_descr,
569 do);
570 *R_IRQ_MASK2_SET =
571 IO_STATE(R_IRQ_MASK2_SET, dma4_eop,
572 set) |
573 IO_STATE(R_IRQ_MASK2_SET, dma5_descr,
574 set);
575 }
576 start_dma_in(port);
577 port->init_irqs = 0;
578 } else { /* !port->use_dma */
579 #ifdef SYNC_SER_MANUAL
580 if (port == &ports[0]) {
581 if (request_irq(8,
582 manual_interrupt,
583 IRQF_SHARED | IRQF_DISABLED,
584 "synchronous serial manual irq",
585 &ports[0])) {
586 printk(KERN_CRIT "Can't alloc "
587 "sync serial manual irq");
588 goto out;
589 }
590 } else if (port == &ports[1]) {
591 if (request_irq(8,
592 manual_interrupt,
593 IRQF_SHARED | IRQF_DISABLED,
594 "synchronous serial manual irq",
595 &ports[1])) {
596 printk(KERN_CRIT "Can't alloc "
597 "sync serial manual irq");
598 goto out;
599 }
600 }
601 port->init_irqs = 0;
602 #else
603 panic("sync_serial: Manual mode not supported.\n");
604 #endif /* SYNC_SER_MANUAL */
605 }
606 } /* port->init_irqs */
607
608 port->busy++;
609 /* Start port if we use it as input */
610 mode = IO_EXTRACT(R_SYNC_SERIAL1_CTRL, mode, port->ctrl_data_shadow);
611 if (mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_input) ||
612 mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_input) ||
613 mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_bidir) ||
614 mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_bidir)) {
615 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt,
616 running);
617 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable,
618 enable);
619 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable,
620 enable);
621 port->started = 1;
622 *port->ctrl_data = port->ctrl_data_shadow;
623 if (!port->use_dma)
624 *R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
625 DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev));
626 }
627 ret = 0;
628
629 out:
630 mutex_unlock(&sync_serial_mutex);
631 return ret;
632 }
633
634 static int sync_serial_release(struct inode *inode, struct file *file)
635 {
636 int dev = MINOR(inode->i_rdev);
637 struct sync_port *port;
638
639 if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
640 DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
641 return -ENODEV;
642 }
643 port = &ports[dev];
644 if (port->busy)
645 port->busy--;
646 if (!port->busy)
647 *R_IRQ_MASK1_CLR = ((1 << port->data_avail_bit) |
648 (1 << port->transmitter_ready_bit));
649
650 return 0;
651 }
652
653
654
655 static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
656 {
657 int dev = MINOR(file->f_dentry->d_inode->i_rdev);
658 unsigned int mask = 0;
659 struct sync_port *port;
660 DEBUGPOLL(static unsigned int prev_mask = 0);
661
662 port = &ports[dev];
663 poll_wait(file, &port->out_wait_q, wait);
664 poll_wait(file, &port->in_wait_q, wait);
665 /* Some room to write */
666 if (port->out_count < OUT_BUFFER_SIZE)
667 mask |= POLLOUT | POLLWRNORM;
668 /* At least an inbufchunk of data */
669 if (sync_data_avail(port) >= port->inbufchunk)
670 mask |= POLLIN | POLLRDNORM;
671
672 DEBUGPOLL(if (mask != prev_mask)
673 printk(KERN_DEBUG "sync_serial_poll: mask 0x%08X %s %s\n",
674 mask,
675 mask & POLLOUT ? "POLLOUT" : "",
676 mask & POLLIN ? "POLLIN" : "");
677 prev_mask = mask;
678 );
679 return mask;
680 }
681
682 static int sync_serial_ioctl_unlocked(struct file *file,
683 unsigned int cmd, unsigned long arg)
684 {
685 int return_val = 0;
686 unsigned long flags;
687
688 int dev = MINOR(file->f_dentry->d_inode->i_rdev);
689 struct sync_port *port;
690
691 if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
692 DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
693 return -1;
694 }
695 port = &ports[dev];
696
697 local_irq_save(flags);
698 /* Disable port while changing config */
699 if (dev) {
700 if (port->use_dma) {
701 RESET_DMA(4); WAIT_DMA(4);
702 port->tr_running = 0;
703 port->out_count = 0;
704 port->outp = port->out_buffer;
705 *R_DMA_CH4_CLR_INTR =
706 IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) |
707 IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do);
708 }
709 SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async);
710 } else {
711 if (port->use_dma) {
712 RESET_DMA(8); WAIT_DMA(8);
713 port->tr_running = 0;
714 port->out_count = 0;
715 port->outp = port->out_buffer;
716 *R_DMA_CH8_CLR_INTR =
717 IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) |
718 IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do);
719 }
720 SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async);
721 }
722 *R_GEN_CONFIG_II = gen_config_ii_shadow;
723 local_irq_restore(flags);
724
725 switch (cmd) {
726 case SSP_SPEED:
727 if (GET_SPEED(arg) == CODEC) {
728 if (dev)
729 SETS(sync_serial_prescale_shadow,
730 R_SYNC_SERIAL_PRESCALE, clk_sel_u3,
731 codec);
732 else
733 SETS(sync_serial_prescale_shadow,
734 R_SYNC_SERIAL_PRESCALE, clk_sel_u1,
735 codec);
736
737 SETF(sync_serial_prescale_shadow,
738 R_SYNC_SERIAL_PRESCALE, prescaler,
739 GET_FREQ(arg));
740 SETF(sync_serial_prescale_shadow,
741 R_SYNC_SERIAL_PRESCALE, frame_rate,
742 GET_FRAME_RATE(arg));
743 SETF(sync_serial_prescale_shadow,
744 R_SYNC_SERIAL_PRESCALE, word_rate,
745 GET_WORD_RATE(arg));
746 } else {
747 SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
748 tr_baud, GET_SPEED(arg));
749 if (dev)
750 SETS(sync_serial_prescale_shadow,
751 R_SYNC_SERIAL_PRESCALE, clk_sel_u3,
752 baudrate);
753 else
754 SETS(sync_serial_prescale_shadow,
755 R_SYNC_SERIAL_PRESCALE, clk_sel_u1,
756 baudrate);
757 }
758 break;
759 case SSP_MODE:
760 if (arg > 5)
761 return -EINVAL;
762 if (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)
763 *R_IRQ_MASK1_CLR = 1 << port->data_avail_bit;
764 else if (!port->use_dma)
765 *R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
766 SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, arg);
767 break;
768 case SSP_FRAME_SYNC:
769 if (arg & NORMAL_SYNC)
770 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
771 f_synctype, normal);
772 else if (arg & EARLY_SYNC)
773 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
774 f_synctype, early);
775
776 if (arg & BIT_SYNC)
777 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
778 f_syncsize, bit);
779 else if (arg & WORD_SYNC)
780 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
781 f_syncsize, word);
782 else if (arg & EXTENDED_SYNC)
783 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
784 f_syncsize, extended);
785
786 if (arg & SYNC_ON)
787 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
788 f_sync, on);
789 else if (arg & SYNC_OFF)
790 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
791 f_sync, off);
792
793 if (arg & WORD_SIZE_8)
794 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
795 wordsize, size8bit);
796 else if (arg & WORD_SIZE_12)
797 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
798 wordsize, size12bit);
799 else if (arg & WORD_SIZE_16)
800 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
801 wordsize, size16bit);
802 else if (arg & WORD_SIZE_24)
803 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
804 wordsize, size24bit);
805 else if (arg & WORD_SIZE_32)
806 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
807 wordsize, size32bit);
808
809 if (arg & BIT_ORDER_MSB)
810 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
811 bitorder, msb);
812 else if (arg & BIT_ORDER_LSB)
813 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
814 bitorder, lsb);
815
816 if (arg & FLOW_CONTROL_ENABLE)
817 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
818 flow_ctrl, enabled);
819 else if (arg & FLOW_CONTROL_DISABLE)
820 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
821 flow_ctrl, disabled);
822
823 if (arg & CLOCK_NOT_GATED)
824 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
825 clk_mode, normal);
826 else if (arg & CLOCK_GATED)
827 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
828 clk_mode, gated);
829
830 break;
831 case SSP_IPOLARITY:
832 /* NOTE!! negedge is considered NORMAL */
833 if (arg & CLOCK_NORMAL)
834 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
835 clk_polarity, neg);
836 else if (arg & CLOCK_INVERT)
837 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
838 clk_polarity, pos);
839
840 if (arg & FRAME_NORMAL)
841 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
842 frame_polarity, normal);
843 else if (arg & FRAME_INVERT)
844 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
845 frame_polarity, inverted);
846
847 if (arg & STATUS_NORMAL)
848 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
849 status_polarity, normal);
850 else if (arg & STATUS_INVERT)
851 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
852 status_polarity, inverted);
853 break;
854 case SSP_OPOLARITY:
855 if (arg & CLOCK_NORMAL)
856 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
857 clk_driver, normal);
858 else if (arg & CLOCK_INVERT)
859 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
860 clk_driver, inverted);
861
862 if (arg & FRAME_NORMAL)
863 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
864 frame_driver, normal);
865 else if (arg & FRAME_INVERT)
866 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
867 frame_driver, inverted);
868
869 if (arg & STATUS_NORMAL)
870 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
871 status_driver, normal);
872 else if (arg & STATUS_INVERT)
873 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
874 status_driver, inverted);
875 break;
876 case SSP_SPI:
877 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl,
878 disabled);
879 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder,
880 msb);
881 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize,
882 size8bit);
883 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on);
884 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize,
885 word);
886 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype,
887 normal);
888 if (arg & SPI_SLAVE) {
889 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
890 frame_polarity, inverted);
891 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
892 clk_polarity, neg);
893 SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
894 mode, SLAVE_INPUT);
895 } else {
896 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
897 frame_driver, inverted);
898 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
899 clk_driver, inverted);
900 SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
901 mode, MASTER_OUTPUT);
902 }
903 break;
904 case SSP_INBUFCHUNK:
905 #if 0
906 if (arg > port->in_buffer_size/NUM_IN_DESCR)
907 return -EINVAL;
908 port->inbufchunk = arg;
909 /* Make sure in_buffer_size is a multiple of inbufchunk */
910 port->in_buffer_size =
911 (port->in_buffer_size/port->inbufchunk) *
912 port->inbufchunk;
913 DEBUG(printk(KERN_DEBUG "inbufchunk %i in_buffer_size: %i\n",
914 port->inbufchunk, port->in_buffer_size));
915 if (port->use_dma) {
916 if (port->port_nbr == 0) {
917 RESET_DMA(9);
918 WAIT_DMA(9);
919 } else {
920 RESET_DMA(5);
921 WAIT_DMA(5);
922 }
923 start_dma_in(port);
924 }
925 #endif
926 break;
927 default:
928 return_val = -1;
929 }
930 /* Make sure we write the config without interruption */
931 local_irq_save(flags);
932 /* Set config and enable port */
933 *port->ctrl_data = port->ctrl_data_shadow;
934 nop(); nop(); nop(); nop();
935 *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow;
936 nop(); nop(); nop(); nop();
937 if (dev)
938 SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync);
939 else
940 SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync);
941
942 *R_GEN_CONFIG_II = gen_config_ii_shadow;
943 /* Reset DMA. At readout from serial port the data could be shifted
944 * one byte if not resetting DMA.
945 */
946 if (port->use_dma) {
947 if (port->port_nbr == 0) {
948 RESET_DMA(9);
949 WAIT_DMA(9);
950 } else {
951 RESET_DMA(5);
952 WAIT_DMA(5);
953 }
954 start_dma_in(port);
955 }
956 local_irq_restore(flags);
957 return return_val;
958 }
959
960 static long sync_serial_ioctl(struct file *file,
961 unsigned int cmd, unsigned long arg)
962 {
963 long ret;
964
965 mutex_lock(&sync_serial_mutex);
966 ret = sync_serial_ioctl_unlocked(file, cmd, arg);
967 mutex_unlock(&sync_serial_mutex);
968
969 return ret;
970 }
971
972
973 static ssize_t sync_serial_write(struct file *file, const char *buf,
974 size_t count, loff_t *ppos)
975 {
976 int dev = MINOR(file->f_dentry->d_inode->i_rdev);
977 DECLARE_WAITQUEUE(wait, current);
978 struct sync_port *port;
979 unsigned long flags;
980 unsigned long c, c1;
981 unsigned long free_outp;
982 unsigned long outp;
983 unsigned long out_buffer;
984
985 if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
986 DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
987 return -ENODEV;
988 }
989 port = &ports[dev];
990
991 DEBUGWRITE(printk(KERN_DEBUG "W d%d c %lu (%d/%d)\n",
992 port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE));
993 /* Space to end of buffer */
994 /*
995 * out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE
996 * outp^ +out_count
997 * ^free_outp
998 * out_buffer 45<- c ->0123OUT_BUFFER_SIZE
999 * +out_count outp^
1000 * free_outp
1001 *
1002 */
1003
1004 /* Read variables that may be updated by interrupts */
1005 local_irq_save(flags);
1006 if (count > OUT_BUFFER_SIZE - port->out_count)
1007 count = OUT_BUFFER_SIZE - port->out_count;
1008
1009 outp = (unsigned long)port->outp;
1010 free_outp = outp + port->out_count;
1011 local_irq_restore(flags);
1012 out_buffer = (unsigned long)port->out_buffer;
1013
1014 /* Find out where and how much to write */
1015 if (free_outp >= out_buffer + OUT_BUFFER_SIZE)
1016 free_outp -= OUT_BUFFER_SIZE;
1017 if (free_outp >= outp)
1018 c = out_buffer + OUT_BUFFER_SIZE - free_outp;
1019 else
1020 c = outp - free_outp;
1021 if (c > count)
1022 c = count;
1023
1024 DEBUGWRITE(printk(KERN_DEBUG "w op %08lX fop %08lX c %lu\n",
1025 outp, free_outp, c));
1026 if (copy_from_user((void *)free_outp, buf, c))
1027 return -EFAULT;
1028
1029 if (c != count) {
1030 buf += c;
1031 c1 = count - c;
1032 DEBUGWRITE(printk(KERN_DEBUG "w2 fi %lu c %lu c1 %lu\n",
1033 free_outp-out_buffer, c, c1));
1034 if (copy_from_user((void *)out_buffer, buf, c1))
1035 return -EFAULT;
1036 }
1037 local_irq_save(flags);
1038 port->out_count += count;
1039 local_irq_restore(flags);
1040
1041 /* Make sure transmitter/receiver is running */
1042 if (!port->started) {
1043 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt,
1044 running);
1045 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable,
1046 enable);
1047 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable,
1048 enable);
1049 port->started = 1;
1050 }
1051
1052 *port->ctrl_data = port->ctrl_data_shadow;
1053
1054 if (file->f_flags & O_NONBLOCK) {
1055 local_irq_save(flags);
1056 if (!port->tr_running) {
1057 if (!port->use_dma) {
1058 /* Start sender by writing data */
1059 send_word(port);
1060 /* and enable transmitter ready IRQ */
1061 *R_IRQ_MASK1_SET = 1 <<
1062 port->transmitter_ready_bit;
1063 } else
1064 start_dma(port,
1065 (unsigned char *volatile)port->outp, c);
1066 }
1067 local_irq_restore(flags);
1068 DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu NB\n",
1069 port->port_nbr, count));
1070 return count;
1071 }
1072
1073 /* Sleep until all sent */
1074 add_wait_queue(&port->out_wait_q, &wait);
1075 set_current_state(TASK_INTERRUPTIBLE);
1076 local_irq_save(flags);
1077 if (!port->tr_running) {
1078 if (!port->use_dma) {
1079 /* Start sender by writing data */
1080 send_word(port);
1081 /* and enable transmitter ready IRQ */
1082 *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit;
1083 } else
1084 start_dma(port, port->outp, c);
1085 }
1086 local_irq_restore(flags);
1087 schedule();
1088 set_current_state(TASK_RUNNING);
1089 remove_wait_queue(&port->out_wait_q, &wait);
1090 if (signal_pending(current))
1091 return -EINTR;
1092
1093 DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu\n", port->port_nbr, count));
1094 return count;
1095 }
1096
1097 static ssize_t sync_serial_read(struct file *file, char *buf,
1098 size_t count, loff_t *ppos)
1099 {
1100 int dev = MINOR(file->f_dentry->d_inode->i_rdev);
1101 int avail;
1102 struct sync_port *port;
1103 unsigned char *start;
1104 unsigned char *end;
1105 unsigned long flags;
1106
1107 if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
1108 DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
1109 return -ENODEV;
1110 }
1111 port = &ports[dev];
1112
1113 DEBUGREAD(printk(KERN_DEBUG "R%d c %d ri %lu wi %lu /%lu\n",
1114 dev, count, port->readp - port->flip,
1115 port->writep - port->flip, port->in_buffer_size));
1116
1117 if (!port->started) {
1118 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt,
1119 running);
1120 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable,
1121 enable);
1122 SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable,
1123 enable);
1124 port->started = 1;
1125 }
1126 *port->ctrl_data = port->ctrl_data_shadow;
1127
1128 /* Calculate number of available bytes */
1129 /* Save pointers to avoid that they are modified by interrupt */
1130 local_irq_save(flags);
1131 start = (unsigned char *)port->readp; /* cast away volatile */
1132 end = (unsigned char *)port->writep; /* cast away volatile */
1133 local_irq_restore(flags);
1134 while (start == end && !port->full) {
1135 /* No data */
1136 if (file->f_flags & O_NONBLOCK)
1137 return -EAGAIN;
1138
1139 interruptible_sleep_on(&port->in_wait_q);
1140 if (signal_pending(current))
1141 return -EINTR;
1142
1143 local_irq_save(flags);
1144 start = (unsigned char *)port->readp; /* cast away volatile */
1145 end = (unsigned char *)port->writep; /* cast away volatile */
1146 local_irq_restore(flags);
1147 }
1148
1149 /* Lazy read, never return wrapped data. */
1150 if (port->full)
1151 avail = port->in_buffer_size;
1152 else if (end > start)
1153 avail = end - start;
1154 else
1155 avail = port->flip + port->in_buffer_size - start;
1156
1157 count = count > avail ? avail : count;
1158 if (copy_to_user(buf, start, count))
1159 return -EFAULT;
1160 /* Disable interrupts while updating readp */
1161 local_irq_save(flags);
1162 port->readp += count;
1163 if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */
1164 port->readp = port->flip;
1165 port->full = 0;
1166 local_irq_restore(flags);
1167 DEBUGREAD(printk(KERN_DEBUG "r %d\n", count));
1168 return count;
1169 }
1170
1171 static void send_word(struct sync_port *port)
1172 {
1173 switch (IO_EXTRACT(R_SYNC_SERIAL1_CTRL, wordsize,
1174 port->ctrl_data_shadow)) {
1175 case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit):
1176 port->out_count--;
1177 *port->data_out = *port->outp++;
1178 if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
1179 port->outp = port->out_buffer;
1180 break;
1181 case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit):
1182 {
1183 int data = (*port->outp++) << 8;
1184 data |= *port->outp++;
1185 port->out_count -= 2;
1186 *port->data_out = data;
1187 if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
1188 port->outp = port->out_buffer;
1189 break;
1190 }
1191 case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit):
1192 port->out_count -= 2;
1193 *port->data_out = *(unsigned short *)port->outp;
1194 port->outp += 2;
1195 if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
1196 port->outp = port->out_buffer;
1197 break;
1198 case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit):
1199 port->out_count -= 3;
1200 *port->data_out = *(unsigned int *)port->outp;
1201 port->outp += 3;
1202 if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
1203 port->outp = port->out_buffer;
1204 break;
1205 case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit):
1206 port->out_count -= 4;
1207 *port->data_out = *(unsigned int *)port->outp;
1208 port->outp += 4;
1209 if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
1210 port->outp = port->out_buffer;
1211 break;
1212 }
1213 }
1214
1215
1216 static void start_dma(struct sync_port *port, const char *data, int count)
1217 {
1218 port->tr_running = 1;
1219 port->out_descr.hw_len = 0;
1220 port->out_descr.next = 0;
1221 port->out_descr.ctrl = d_eol | d_eop; /* No d_wait to avoid glitches */
1222 port->out_descr.sw_len = count;
1223 port->out_descr.buf = virt_to_phys(data);
1224 port->out_descr.status = 0;
1225
1226 *port->output_dma_first = virt_to_phys(&port->out_descr);
1227 *port->output_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start);
1228 DEBUGTXINT(printk(KERN_DEBUG "dma %08lX c %d\n",
1229 (unsigned long)data, count));
1230 }
1231
1232 static void start_dma_in(struct sync_port *port)
1233 {
1234 int i;
1235 unsigned long buf;
1236 port->writep = port->flip;
1237
1238 if (port->writep > port->flip + port->in_buffer_size) {
1239 panic("Offset too large in sync serial driver\n");
1240 return;
1241 }
1242 buf = virt_to_phys(port->in_buffer);
1243 for (i = 0; i < NUM_IN_DESCR; i++) {
1244 port->in_descr[i].sw_len = port->inbufchunk;
1245 port->in_descr[i].ctrl = d_int;
1246 port->in_descr[i].next = virt_to_phys(&port->in_descr[i+1]);
1247 port->in_descr[i].buf = buf;
1248 port->in_descr[i].hw_len = 0;
1249 port->in_descr[i].status = 0;
1250 port->in_descr[i].fifo_len = 0;
1251 buf += port->inbufchunk;
1252 prepare_rx_descriptor(&port->in_descr[i]);
1253 }
1254 /* Link the last descriptor to the first */
1255 port->in_descr[i-1].next = virt_to_phys(&port->in_descr[0]);
1256 port->in_descr[i-1].ctrl |= d_eol;
1257 port->next_rx_desc = &port->in_descr[0];
1258 port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1];
1259 *port->input_dma_first = virt_to_phys(port->next_rx_desc);
1260 *port->input_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start);
1261 }
1262
1263 #ifdef SYNC_SER_DMA
1264 static irqreturn_t tr_interrupt(int irq, void *dev_id)
1265 {
1266 unsigned long ireg = *R_IRQ_MASK2_RD;
1267 struct etrax_dma_descr *descr;
1268 unsigned int sentl;
1269 int handled = 0;
1270 int i;
1271
1272 for (i = 0; i < NUMBER_OF_PORTS; i++) {
1273 struct sync_port *port = &ports[i];
1274 if (!port->enabled || !port->use_dma)
1275 continue;
1276
1277 /* IRQ active for the port? */
1278 if (!(ireg & (1 << port->output_dma_bit)))
1279 continue;
1280
1281 handled = 1;
1282
1283 /* Clear IRQ */
1284 *port->output_dma_clr_irq =
1285 IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do) |
1286 IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do);
1287
1288 descr = &port->out_descr;
1289 if (!(descr->status & d_stop))
1290 sentl = descr->sw_len;
1291 else
1292 /* Otherwise find amount of data sent here */
1293 sentl = descr->hw_len;
1294
1295 port->out_count -= sentl;
1296 port->outp += sentl;
1297 if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
1298 port->outp = port->out_buffer;
1299 if (port->out_count) {
1300 int c = port->out_buffer + OUT_BUFFER_SIZE - port->outp;
1301 if (c > port->out_count)
1302 c = port->out_count;
1303 DEBUGTXINT(printk(KERN_DEBUG
1304 "tx_int DMAWRITE %i %i\n", sentl, c));
1305 start_dma(port, port->outp, c);
1306 } else {
1307 DEBUGTXINT(printk(KERN_DEBUG
1308 "tx_int DMA stop %i\n", sentl));
1309 port->tr_running = 0;
1310 }
1311 /* wake up the waiting process */
1312 wake_up_interruptible(&port->out_wait_q);
1313 }
1314 return IRQ_RETVAL(handled);
1315 } /* tr_interrupt */
1316
1317 static irqreturn_t rx_interrupt(int irq, void *dev_id)
1318 {
1319 unsigned long ireg = *R_IRQ_MASK2_RD;
1320 int i;
1321 int handled = 0;
1322
1323 for (i = 0; i < NUMBER_OF_PORTS; i++) {
1324 struct sync_port *port = &ports[i];
1325
1326 if (!port->enabled || !port->use_dma)
1327 continue;
1328
1329 if (!(ireg & (1 << port->input_dma_descr_bit)))
1330 continue;
1331
1332 /* Descriptor interrupt */
1333 handled = 1;
1334 while (*port->input_dma_descr !=
1335 virt_to_phys(port->next_rx_desc)) {
1336 if (port->writep + port->inbufchunk > port->flip +
1337 port->in_buffer_size) {
1338 int first_size = port->flip +
1339 port->in_buffer_size - port->writep;
1340 memcpy(port->writep,
1341 phys_to_virt(port->next_rx_desc->buf),
1342 first_size);
1343 memcpy(port->flip,
1344 phys_to_virt(port->next_rx_desc->buf +
1345 first_size),
1346 port->inbufchunk - first_size);
1347 port->writep = port->flip +
1348 port->inbufchunk - first_size;
1349 } else {
1350 memcpy(port->writep,
1351 phys_to_virt(port->next_rx_desc->buf),
1352 port->inbufchunk);
1353 port->writep += port->inbufchunk;
1354 if (port->writep >= port->flip
1355 + port->in_buffer_size)
1356 port->writep = port->flip;
1357 }
1358 if (port->writep == port->readp)
1359 port->full = 1;
1360 prepare_rx_descriptor(port->next_rx_desc);
1361 port->next_rx_desc->ctrl |= d_eol;
1362 port->prev_rx_desc->ctrl &= ~d_eol;
1363 port->prev_rx_desc = phys_to_virt((unsigned)
1364 port->next_rx_desc);
1365 port->next_rx_desc = phys_to_virt((unsigned)
1366 port->next_rx_desc->next);
1367 /* Wake up the waiting process */
1368 wake_up_interruptible(&port->in_wait_q);
1369 *port->input_dma_cmd = IO_STATE(R_DMA_CH1_CMD,
1370 cmd, restart);
1371 /* DMA has reached end of descriptor */
1372 *port->input_dma_clr_irq = IO_STATE(R_DMA_CH0_CLR_INTR,
1373 clr_descr, do);
1374 }
1375 }
1376 return IRQ_RETVAL(handled);
1377 } /* rx_interrupt */
1378 #endif /* SYNC_SER_DMA */
1379
1380 #ifdef SYNC_SER_MANUAL
1381 static irqreturn_t manual_interrupt(int irq, void *dev_id)
1382 {
1383 int i;
1384 int handled = 0;
1385
1386 for (i = 0; i < NUMBER_OF_PORTS; i++) {
1387 struct sync_port *port = &ports[i];
1388
1389 if (!port->enabled || port->use_dma)
1390 continue;
1391
1392 /* Data received? */
1393 if (*R_IRQ_MASK1_RD & (1 << port->data_avail_bit)) {
1394 handled = 1;
1395 /* Read data */
1396 switch (port->ctrl_data_shadow &
1397 IO_MASK(R_SYNC_SERIAL1_CTRL, wordsize)) {
1398 case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit):
1399 *port->writep++ =
1400 *(volatile char *)port->data_in;
1401 break;
1402 case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit):
1403 {
1404 int data = *(unsigned short *)port->data_in;
1405 *port->writep = (data & 0x0ff0) >> 4;
1406 *(port->writep + 1) = data & 0x0f;
1407 port->writep += 2;
1408 break;
1409 }
1410 case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit):
1411 *(unsigned short *)port->writep =
1412 *(volatile unsigned short *)port->data_in;
1413 port->writep += 2;
1414 break;
1415 case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit):
1416 *(unsigned int *)port->writep = *port->data_in;
1417 port->writep += 3;
1418 break;
1419 case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit):
1420 *(unsigned int *)port->writep = *port->data_in;
1421 port->writep += 4;
1422 break;
1423 }
1424
1425 /* Wrap? */
1426 if (port->writep >= port->flip + port->in_buffer_size)
1427 port->writep = port->flip;
1428 if (port->writep == port->readp) {
1429 /* Receive buffer overrun, discard oldest */
1430 port->readp++;
1431 /* Wrap? */
1432 if (port->readp >= port->flip +
1433 port->in_buffer_size)
1434 port->readp = port->flip;
1435 }
1436 if (sync_data_avail(port) >= port->inbufchunk) {
1437 /* Wake up application */
1438 wake_up_interruptible(&port->in_wait_q);
1439 }
1440 }
1441
1442 /* Transmitter ready? */
1443 if (*R_IRQ_MASK1_RD & (1 << port->transmitter_ready_bit)) {
1444 if (port->out_count > 0) {
1445 /* More data to send */
1446 send_word(port);
1447 } else {
1448 /* Transmission finished */
1449 /* Turn off IRQ */
1450 *R_IRQ_MASK1_CLR = 1 <<
1451 port->transmitter_ready_bit;
1452 /* Wake up application */
1453 wake_up_interruptible(&port->out_wait_q);
1454 }
1455 }
1456 }
1457 return IRQ_RETVAL(handled);
1458 }
1459 #endif
1460
1461 module_init(etrax_sync_serial_init);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree