i2c-nforce2: Disable the second SMBus channel on the DFI Lanparty NF4 Expert
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / mm / page-writeback.c
blob789b6adbef37f1f38c3887f10ba130595903408a
1 /*
2 * mm/page-writeback.c
4 * Copyright (C) 2002, Linus Torvalds.
5 * Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
7 * Contains functions related to writing back dirty pages at the
8 * address_space level.
10 * 10Apr2002 akpm@zip.com.au
11 * Initial version
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/spinlock.h>
17 #include <linux/fs.h>
18 #include <linux/mm.h>
19 #include <linux/swap.h>
20 #include <linux/slab.h>
21 #include <linux/pagemap.h>
22 #include <linux/writeback.h>
23 #include <linux/init.h>
24 #include <linux/backing-dev.h>
25 #include <linux/task_io_accounting_ops.h>
26 #include <linux/blkdev.h>
27 #include <linux/mpage.h>
28 #include <linux/rmap.h>
29 #include <linux/percpu.h>
30 #include <linux/notifier.h>
31 #include <linux/smp.h>
32 #include <linux/sysctl.h>
33 #include <linux/cpu.h>
34 #include <linux/syscalls.h>
35 #include <linux/buffer_head.h>
36 #include <linux/pagevec.h>
39 * The maximum number of pages to writeout in a single bdflush/kupdate
40 * operation. We do this so we don't hold I_SYNC against an inode for
41 * enormous amounts of time, which would block a userspace task which has
42 * been forced to throttle against that inode. Also, the code reevaluates
43 * the dirty each time it has written this many pages.
45 #define MAX_WRITEBACK_PAGES 1024
48 * After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
49 * will look to see if it needs to force writeback or throttling.
51 static long ratelimit_pages = 32;
54 * When balance_dirty_pages decides that the caller needs to perform some
55 * non-background writeback, this is how many pages it will attempt to write.
56 * It should be somewhat larger than RATELIMIT_PAGES to ensure that reasonably
57 * large amounts of I/O are submitted.
59 static inline long sync_writeback_pages(void)
61 return ratelimit_pages + ratelimit_pages / 2;
64 /* The following parameters are exported via /proc/sys/vm */
67 * Start background writeback (via pdflush) at this percentage
69 int dirty_background_ratio = 5;
72 * free highmem will not be subtracted from the total free memory
73 * for calculating free ratios if vm_highmem_is_dirtyable is true
75 int vm_highmem_is_dirtyable;
78 * The generator of dirty data starts writeback at this percentage
80 int vm_dirty_ratio = 10;
83 * The interval between `kupdate'-style writebacks, in jiffies
85 int dirty_writeback_interval = 5 * HZ;
88 * The longest number of jiffies for which data is allowed to remain dirty
90 int dirty_expire_interval = 30 * HZ;
93 * Flag that makes the machine dump writes/reads and block dirtyings.
95 int block_dump;
98 * Flag that puts the machine in "laptop mode". Doubles as a timeout in jiffies:
99 * a full sync is triggered after this time elapses without any disk activity.
101 int laptop_mode;
103 EXPORT_SYMBOL(laptop_mode);
105 /* End of sysctl-exported parameters */
108 static void background_writeout(unsigned long _min_pages);
111 * Scale the writeback cache size proportional to the relative writeout speeds.
113 * We do this by keeping a floating proportion between BDIs, based on page
114 * writeback completions [end_page_writeback()]. Those devices that write out
115 * pages fastest will get the larger share, while the slower will get a smaller
116 * share.
118 * We use page writeout completions because we are interested in getting rid of
119 * dirty pages. Having them written out is the primary goal.
121 * We introduce a concept of time, a period over which we measure these events,
122 * because demand can/will vary over time. The length of this period itself is
123 * measured in page writeback completions.
126 static struct prop_descriptor vm_completions;
127 static struct prop_descriptor vm_dirties;
129 static unsigned long determine_dirtyable_memory(void);
132 * couple the period to the dirty_ratio:
134 * period/2 ~ roundup_pow_of_two(dirty limit)
136 static int calc_period_shift(void)
138 unsigned long dirty_total;
140 dirty_total = (vm_dirty_ratio * determine_dirtyable_memory()) / 100;
141 return 2 + ilog2(dirty_total - 1);
145 * update the period when the dirty ratio changes.
147 int dirty_ratio_handler(struct ctl_table *table, int write,
148 struct file *filp, void __user *buffer, size_t *lenp,
149 loff_t *ppos)
151 int old_ratio = vm_dirty_ratio;
152 int ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
153 if (ret == 0 && write && vm_dirty_ratio != old_ratio) {
154 int shift = calc_period_shift();
155 prop_change_shift(&vm_completions, shift);
156 prop_change_shift(&vm_dirties, shift);
158 return ret;
162 * Increment the BDI's writeout completion count and the global writeout
163 * completion count. Called from test_clear_page_writeback().
165 static inline void __bdi_writeout_inc(struct backing_dev_info *bdi)
167 __prop_inc_percpu_max(&vm_completions, &bdi->completions,
168 bdi->max_prop_frac);
171 void bdi_writeout_inc(struct backing_dev_info *bdi)
173 unsigned long flags;
175 local_irq_save(flags);
176 __bdi_writeout_inc(bdi);
177 local_irq_restore(flags);
179 EXPORT_SYMBOL_GPL(bdi_writeout_inc);
181 static inline void task_dirty_inc(struct task_struct *tsk)
183 prop_inc_single(&vm_dirties, &tsk->dirties);
187 * Obtain an accurate fraction of the BDI's portion.
189 static void bdi_writeout_fraction(struct backing_dev_info *bdi,
190 long *numerator, long *denominator)
192 if (bdi_cap_writeback_dirty(bdi)) {
193 prop_fraction_percpu(&vm_completions, &bdi->completions,
194 numerator, denominator);
195 } else {
196 *numerator = 0;
197 *denominator = 1;
202 * Clip the earned share of dirty pages to that which is actually available.
203 * This avoids exceeding the total dirty_limit when the floating averages
204 * fluctuate too quickly.
206 static void
207 clip_bdi_dirty_limit(struct backing_dev_info *bdi, long dirty, long *pbdi_dirty)
209 long avail_dirty;
211 avail_dirty = dirty -
212 (global_page_state(NR_FILE_DIRTY) +
213 global_page_state(NR_WRITEBACK) +
214 global_page_state(NR_UNSTABLE_NFS) +
215 global_page_state(NR_WRITEBACK_TEMP));
217 if (avail_dirty < 0)
218 avail_dirty = 0;
220 avail_dirty += bdi_stat(bdi, BDI_RECLAIMABLE) +
221 bdi_stat(bdi, BDI_WRITEBACK);
223 *pbdi_dirty = min(*pbdi_dirty, avail_dirty);
226 static inline void task_dirties_fraction(struct task_struct *tsk,
227 long *numerator, long *denominator)
229 prop_fraction_single(&vm_dirties, &tsk->dirties,
230 numerator, denominator);
234 * scale the dirty limit
236 * task specific dirty limit:
238 * dirty -= (dirty/8) * p_{t}
240 static void task_dirty_limit(struct task_struct *tsk, long *pdirty)
242 long numerator, denominator;
243 long dirty = *pdirty;
244 u64 inv = dirty >> 3;
246 task_dirties_fraction(tsk, &numerator, &denominator);
247 inv *= numerator;
248 do_div(inv, denominator);
250 dirty -= inv;
251 if (dirty < *pdirty/2)
252 dirty = *pdirty/2;
254 *pdirty = dirty;
260 static DEFINE_SPINLOCK(bdi_lock);
261 static unsigned int bdi_min_ratio;
263 int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
265 int ret = 0;
266 unsigned long flags;
268 spin_lock_irqsave(&bdi_lock, flags);
269 if (min_ratio > bdi->max_ratio) {
270 ret = -EINVAL;
271 } else {
272 min_ratio -= bdi->min_ratio;
273 if (bdi_min_ratio + min_ratio < 100) {
274 bdi_min_ratio += min_ratio;
275 bdi->min_ratio += min_ratio;
276 } else {
277 ret = -EINVAL;
280 spin_unlock_irqrestore(&bdi_lock, flags);
282 return ret;
285 int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned max_ratio)
287 unsigned long flags;
288 int ret = 0;
290 if (max_ratio > 100)
291 return -EINVAL;
293 spin_lock_irqsave(&bdi_lock, flags);
294 if (bdi->min_ratio > max_ratio) {
295 ret = -EINVAL;
296 } else {
297 bdi->max_ratio = max_ratio;
298 bdi->max_prop_frac = (PROP_FRAC_BASE * max_ratio) / 100;
300 spin_unlock_irqrestore(&bdi_lock, flags);
302 return ret;
304 EXPORT_SYMBOL(bdi_set_max_ratio);
307 * Work out the current dirty-memory clamping and background writeout
308 * thresholds.
310 * The main aim here is to lower them aggressively if there is a lot of mapped
311 * memory around. To avoid stressing page reclaim with lots of unreclaimable
312 * pages. It is better to clamp down on writers than to start swapping, and
313 * performing lots of scanning.
315 * We only allow 1/2 of the currently-unmapped memory to be dirtied.
317 * We don't permit the clamping level to fall below 5% - that is getting rather
318 * excessive.
320 * We make sure that the background writeout level is below the adjusted
321 * clamping level.
324 static unsigned long highmem_dirtyable_memory(unsigned long total)
326 #ifdef CONFIG_HIGHMEM
327 int node;
328 unsigned long x = 0;
330 for_each_node_state(node, N_HIGH_MEMORY) {
331 struct zone *z =
332 &NODE_DATA(node)->node_zones[ZONE_HIGHMEM];
334 x += zone_page_state(z, NR_FREE_PAGES)
335 + zone_page_state(z, NR_INACTIVE)
336 + zone_page_state(z, NR_ACTIVE);
339 * Make sure that the number of highmem pages is never larger
340 * than the number of the total dirtyable memory. This can only
341 * occur in very strange VM situations but we want to make sure
342 * that this does not occur.
344 return min(x, total);
345 #else
346 return 0;
347 #endif
350 static unsigned long determine_dirtyable_memory(void)
352 unsigned long x;
354 x = global_page_state(NR_FREE_PAGES)
355 + global_page_state(NR_INACTIVE)
356 + global_page_state(NR_ACTIVE);
358 if (!vm_highmem_is_dirtyable)
359 x -= highmem_dirtyable_memory(x);
361 return x + 1; /* Ensure that we never return 0 */
364 void
365 get_dirty_limits(long *pbackground, long *pdirty, long *pbdi_dirty,
366 struct backing_dev_info *bdi)
368 int background_ratio; /* Percentages */
369 int dirty_ratio;
370 long background;
371 long dirty;
372 unsigned long available_memory = determine_dirtyable_memory();
373 struct task_struct *tsk;
375 dirty_ratio = vm_dirty_ratio;
376 if (dirty_ratio < 5)
377 dirty_ratio = 5;
379 background_ratio = dirty_background_ratio;
380 if (background_ratio >= dirty_ratio)
381 background_ratio = dirty_ratio / 2;
383 background = (background_ratio * available_memory) / 100;
384 dirty = (dirty_ratio * available_memory) / 100;
385 tsk = current;
386 if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk)) {
387 background += background / 4;
388 dirty += dirty / 4;
390 *pbackground = background;
391 *pdirty = dirty;
393 if (bdi) {
394 u64 bdi_dirty;
395 long numerator, denominator;
398 * Calculate this BDI's share of the dirty ratio.
400 bdi_writeout_fraction(bdi, &numerator, &denominator);
402 bdi_dirty = (dirty * (100 - bdi_min_ratio)) / 100;
403 bdi_dirty *= numerator;
404 do_div(bdi_dirty, denominator);
405 bdi_dirty += (dirty * bdi->min_ratio) / 100;
406 if (bdi_dirty > (dirty * bdi->max_ratio) / 100)
407 bdi_dirty = dirty * bdi->max_ratio / 100;
409 *pbdi_dirty = bdi_dirty;
410 clip_bdi_dirty_limit(bdi, dirty, pbdi_dirty);
411 task_dirty_limit(current, pbdi_dirty);
416 * balance_dirty_pages() must be called by processes which are generating dirty
417 * data. It looks at the number of dirty pages in the machine and will force
418 * the caller to perform writeback if the system is over `vm_dirty_ratio'.
419 * If we're over `background_thresh' then pdflush is woken to perform some
420 * writeout.
422 static void balance_dirty_pages(struct address_space *mapping)
424 long nr_reclaimable, bdi_nr_reclaimable;
425 long nr_writeback, bdi_nr_writeback;
426 long background_thresh;
427 long dirty_thresh;
428 long bdi_thresh;
429 unsigned long pages_written = 0;
430 unsigned long write_chunk = sync_writeback_pages();
432 struct backing_dev_info *bdi = mapping->backing_dev_info;
434 for (;;) {
435 struct writeback_control wbc = {
436 .bdi = bdi,
437 .sync_mode = WB_SYNC_NONE,
438 .older_than_this = NULL,
439 .nr_to_write = write_chunk,
440 .range_cyclic = 1,
443 get_dirty_limits(&background_thresh, &dirty_thresh,
444 &bdi_thresh, bdi);
446 nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
447 global_page_state(NR_UNSTABLE_NFS);
448 nr_writeback = global_page_state(NR_WRITEBACK);
450 bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
451 bdi_nr_writeback = bdi_stat(bdi, BDI_WRITEBACK);
453 if (bdi_nr_reclaimable + bdi_nr_writeback <= bdi_thresh)
454 break;
457 * Throttle it only when the background writeback cannot
458 * catch-up. This avoids (excessively) small writeouts
459 * when the bdi limits are ramping up.
461 if (nr_reclaimable + nr_writeback <
462 (background_thresh + dirty_thresh) / 2)
463 break;
465 if (!bdi->dirty_exceeded)
466 bdi->dirty_exceeded = 1;
468 /* Note: nr_reclaimable denotes nr_dirty + nr_unstable.
469 * Unstable writes are a feature of certain networked
470 * filesystems (i.e. NFS) in which data may have been
471 * written to the server's write cache, but has not yet
472 * been flushed to permanent storage.
474 if (bdi_nr_reclaimable) {
475 writeback_inodes(&wbc);
476 pages_written += write_chunk - wbc.nr_to_write;
477 get_dirty_limits(&background_thresh, &dirty_thresh,
478 &bdi_thresh, bdi);
482 * In order to avoid the stacked BDI deadlock we need
483 * to ensure we accurately count the 'dirty' pages when
484 * the threshold is low.
486 * Otherwise it would be possible to get thresh+n pages
487 * reported dirty, even though there are thresh-m pages
488 * actually dirty; with m+n sitting in the percpu
489 * deltas.
491 if (bdi_thresh < 2*bdi_stat_error(bdi)) {
492 bdi_nr_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE);
493 bdi_nr_writeback = bdi_stat_sum(bdi, BDI_WRITEBACK);
494 } else if (bdi_nr_reclaimable) {
495 bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
496 bdi_nr_writeback = bdi_stat(bdi, BDI_WRITEBACK);
499 if (bdi_nr_reclaimable + bdi_nr_writeback <= bdi_thresh)
500 break;
501 if (pages_written >= write_chunk)
502 break; /* We've done our duty */
504 congestion_wait(WRITE, HZ/10);
507 if (bdi_nr_reclaimable + bdi_nr_writeback < bdi_thresh &&
508 bdi->dirty_exceeded)
509 bdi->dirty_exceeded = 0;
511 if (writeback_in_progress(bdi))
512 return; /* pdflush is already working this queue */
515 * In laptop mode, we wait until hitting the higher threshold before
516 * starting background writeout, and then write out all the way down
517 * to the lower threshold. So slow writers cause minimal disk activity.
519 * In normal mode, we start background writeout at the lower
520 * background_thresh, to keep the amount of dirty memory low.
522 if ((laptop_mode && pages_written) ||
523 (!laptop_mode && (global_page_state(NR_FILE_DIRTY)
524 + global_page_state(NR_UNSTABLE_NFS)
525 > background_thresh)))
526 pdflush_operation(background_writeout, 0);
529 void set_page_dirty_balance(struct page *page, int page_mkwrite)
531 if (set_page_dirty(page) || page_mkwrite) {
532 struct address_space *mapping = page_mapping(page);
534 if (mapping)
535 balance_dirty_pages_ratelimited(mapping);
540 * balance_dirty_pages_ratelimited_nr - balance dirty memory state
541 * @mapping: address_space which was dirtied
542 * @nr_pages_dirtied: number of pages which the caller has just dirtied
544 * Processes which are dirtying memory should call in here once for each page
545 * which was newly dirtied. The function will periodically check the system's
546 * dirty state and will initiate writeback if needed.
548 * On really big machines, get_writeback_state is expensive, so try to avoid
549 * calling it too often (ratelimiting). But once we're over the dirty memory
550 * limit we decrease the ratelimiting by a lot, to prevent individual processes
551 * from overshooting the limit by (ratelimit_pages) each.
553 void balance_dirty_pages_ratelimited_nr(struct address_space *mapping,
554 unsigned long nr_pages_dirtied)
556 static DEFINE_PER_CPU(unsigned long, ratelimits) = 0;
557 unsigned long ratelimit;
558 unsigned long *p;
560 ratelimit = ratelimit_pages;
561 if (mapping->backing_dev_info->dirty_exceeded)
562 ratelimit = 8;
565 * Check the rate limiting. Also, we do not want to throttle real-time
566 * tasks in balance_dirty_pages(). Period.
568 preempt_disable();
569 p = &__get_cpu_var(ratelimits);
570 *p += nr_pages_dirtied;
571 if (unlikely(*p >= ratelimit)) {
572 *p = 0;
573 preempt_enable();
574 balance_dirty_pages(mapping);
575 return;
577 preempt_enable();
579 EXPORT_SYMBOL(balance_dirty_pages_ratelimited_nr);
581 void throttle_vm_writeout(gfp_t gfp_mask)
583 long background_thresh;
584 long dirty_thresh;
586 for ( ; ; ) {
587 get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
590 * Boost the allowable dirty threshold a bit for page
591 * allocators so they don't get DoS'ed by heavy writers
593 dirty_thresh += dirty_thresh / 10; /* wheeee... */
595 if (global_page_state(NR_UNSTABLE_NFS) +
596 global_page_state(NR_WRITEBACK) <= dirty_thresh)
597 break;
598 congestion_wait(WRITE, HZ/10);
601 * The caller might hold locks which can prevent IO completion
602 * or progress in the filesystem. So we cannot just sit here
603 * waiting for IO to complete.
605 if ((gfp_mask & (__GFP_FS|__GFP_IO)) != (__GFP_FS|__GFP_IO))
606 break;
611 * writeback at least _min_pages, and keep writing until the amount of dirty
612 * memory is less than the background threshold, or until we're all clean.
614 static void background_writeout(unsigned long _min_pages)
616 long min_pages = _min_pages;
617 struct writeback_control wbc = {
618 .bdi = NULL,
619 .sync_mode = WB_SYNC_NONE,
620 .older_than_this = NULL,
621 .nr_to_write = 0,
622 .nonblocking = 1,
623 .range_cyclic = 1,
626 for ( ; ; ) {
627 long background_thresh;
628 long dirty_thresh;
630 get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
631 if (global_page_state(NR_FILE_DIRTY) +
632 global_page_state(NR_UNSTABLE_NFS) < background_thresh
633 && min_pages <= 0)
634 break;
635 wbc.more_io = 0;
636 wbc.encountered_congestion = 0;
637 wbc.nr_to_write = MAX_WRITEBACK_PAGES;
638 wbc.pages_skipped = 0;
639 writeback_inodes(&wbc);
640 min_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
641 if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
642 /* Wrote less than expected */
643 if (wbc.encountered_congestion || wbc.more_io)
644 congestion_wait(WRITE, HZ/10);
645 else
646 break;
652 * Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
653 * the whole world. Returns 0 if a pdflush thread was dispatched. Returns
654 * -1 if all pdflush threads were busy.
656 int wakeup_pdflush(long nr_pages)
658 if (nr_pages == 0)
659 nr_pages = global_page_state(NR_FILE_DIRTY) +
660 global_page_state(NR_UNSTABLE_NFS);
661 return pdflush_operation(background_writeout, nr_pages);
664 static void wb_timer_fn(unsigned long unused);
665 static void laptop_timer_fn(unsigned long unused);
667 static DEFINE_TIMER(wb_timer, wb_timer_fn, 0, 0);
668 static DEFINE_TIMER(laptop_mode_wb_timer, laptop_timer_fn, 0, 0);
671 * Periodic writeback of "old" data.
673 * Define "old": the first time one of an inode's pages is dirtied, we mark the
674 * dirtying-time in the inode's address_space. So this periodic writeback code
675 * just walks the superblock inode list, writing back any inodes which are
676 * older than a specific point in time.
678 * Try to run once per dirty_writeback_interval. But if a writeback event
679 * takes longer than a dirty_writeback_interval interval, then leave a
680 * one-second gap.
682 * older_than_this takes precedence over nr_to_write. So we'll only write back
683 * all dirty pages if they are all attached to "old" mappings.
685 static void wb_kupdate(unsigned long arg)
687 unsigned long oldest_jif;
688 unsigned long start_jif;
689 unsigned long next_jif;
690 long nr_to_write;
691 struct writeback_control wbc = {
692 .bdi = NULL,
693 .sync_mode = WB_SYNC_NONE,
694 .older_than_this = &oldest_jif,
695 .nr_to_write = 0,
696 .nonblocking = 1,
697 .for_kupdate = 1,
698 .range_cyclic = 1,
701 sync_supers();
703 oldest_jif = jiffies - dirty_expire_interval;
704 start_jif = jiffies;
705 next_jif = start_jif + dirty_writeback_interval;
706 nr_to_write = global_page_state(NR_FILE_DIRTY) +
707 global_page_state(NR_UNSTABLE_NFS) +
708 (inodes_stat.nr_inodes - inodes_stat.nr_unused);
709 while (nr_to_write > 0) {
710 wbc.more_io = 0;
711 wbc.encountered_congestion = 0;
712 wbc.nr_to_write = MAX_WRITEBACK_PAGES;
713 writeback_inodes(&wbc);
714 if (wbc.nr_to_write > 0) {
715 if (wbc.encountered_congestion || wbc.more_io)
716 congestion_wait(WRITE, HZ/10);
717 else
718 break; /* All the old data is written */
720 nr_to_write -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
722 if (time_before(next_jif, jiffies + HZ))
723 next_jif = jiffies + HZ;
724 if (dirty_writeback_interval)
725 mod_timer(&wb_timer, next_jif);
729 * sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
731 int dirty_writeback_centisecs_handler(ctl_table *table, int write,
732 struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
734 proc_dointvec_userhz_jiffies(table, write, file, buffer, length, ppos);
735 if (dirty_writeback_interval)
736 mod_timer(&wb_timer, jiffies + dirty_writeback_interval);
737 else
738 del_timer(&wb_timer);
739 return 0;
742 static void wb_timer_fn(unsigned long unused)
744 if (pdflush_operation(wb_kupdate, 0) < 0)
745 mod_timer(&wb_timer, jiffies + HZ); /* delay 1 second */
748 static void laptop_flush(unsigned long unused)
750 sys_sync();
753 static void laptop_timer_fn(unsigned long unused)
755 pdflush_operation(laptop_flush, 0);
759 * We've spun up the disk and we're in laptop mode: schedule writeback
760 * of all dirty data a few seconds from now. If the flush is already scheduled
761 * then push it back - the user is still using the disk.
763 void laptop_io_completion(void)
765 mod_timer(&laptop_mode_wb_timer, jiffies + laptop_mode);
769 * We're in laptop mode and we've just synced. The sync's writes will have
770 * caused another writeback to be scheduled by laptop_io_completion.
771 * Nothing needs to be written back anymore, so we unschedule the writeback.
773 void laptop_sync_completion(void)
775 del_timer(&laptop_mode_wb_timer);
779 * If ratelimit_pages is too high then we can get into dirty-data overload
780 * if a large number of processes all perform writes at the same time.
781 * If it is too low then SMP machines will call the (expensive)
782 * get_writeback_state too often.
784 * Here we set ratelimit_pages to a level which ensures that when all CPUs are
785 * dirtying in parallel, we cannot go more than 3% (1/32) over the dirty memory
786 * thresholds before writeback cuts in.
788 * But the limit should not be set too high. Because it also controls the
789 * amount of memory which the balance_dirty_pages() caller has to write back.
790 * If this is too large then the caller will block on the IO queue all the
791 * time. So limit it to four megabytes - the balance_dirty_pages() caller
792 * will write six megabyte chunks, max.
795 void writeback_set_ratelimit(void)
797 ratelimit_pages = vm_total_pages / (num_online_cpus() * 32);
798 if (ratelimit_pages < 16)
799 ratelimit_pages = 16;
800 if (ratelimit_pages * PAGE_CACHE_SIZE > 4096 * 1024)
801 ratelimit_pages = (4096 * 1024) / PAGE_CACHE_SIZE;
804 static int __cpuinit
805 ratelimit_handler(struct notifier_block *self, unsigned long u, void *v)
807 writeback_set_ratelimit();
808 return NOTIFY_DONE;
811 static struct notifier_block __cpuinitdata ratelimit_nb = {
812 .notifier_call = ratelimit_handler,
813 .next = NULL,
817 * Called early on to tune the page writeback dirty limits.
819 * We used to scale dirty pages according to how total memory
820 * related to pages that could be allocated for buffers (by
821 * comparing nr_free_buffer_pages() to vm_total_pages.
823 * However, that was when we used "dirty_ratio" to scale with
824 * all memory, and we don't do that any more. "dirty_ratio"
825 * is now applied to total non-HIGHPAGE memory (by subtracting
826 * totalhigh_pages from vm_total_pages), and as such we can't
827 * get into the old insane situation any more where we had
828 * large amounts of dirty pages compared to a small amount of
829 * non-HIGHMEM memory.
831 * But we might still want to scale the dirty_ratio by how
832 * much memory the box has..
834 void __init page_writeback_init(void)
836 int shift;
838 mod_timer(&wb_timer, jiffies + dirty_writeback_interval);
839 writeback_set_ratelimit();
840 register_cpu_notifier(&ratelimit_nb);
842 shift = calc_period_shift();
843 prop_descriptor_init(&vm_completions, shift);
844 prop_descriptor_init(&vm_dirties, shift);
848 * write_cache_pages - walk the list of dirty pages of the given address space and write all of them.
849 * @mapping: address space structure to write
850 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
851 * @writepage: function called for each page
852 * @data: data passed to writepage function
854 * If a page is already under I/O, write_cache_pages() skips it, even
855 * if it's dirty. This is desirable behaviour for memory-cleaning writeback,
856 * but it is INCORRECT for data-integrity system calls such as fsync(). fsync()
857 * and msync() need to guarantee that all the data which was dirty at the time
858 * the call was made get new I/O started against them. If wbc->sync_mode is
859 * WB_SYNC_ALL then we were called for data integrity and we must wait for
860 * existing IO to complete.
862 int write_cache_pages(struct address_space *mapping,
863 struct writeback_control *wbc, writepage_t writepage,
864 void *data)
866 struct backing_dev_info *bdi = mapping->backing_dev_info;
867 int ret = 0;
868 int done = 0;
869 struct pagevec pvec;
870 int nr_pages;
871 pgoff_t index;
872 pgoff_t end; /* Inclusive */
873 int scanned = 0;
874 int range_whole = 0;
876 if (wbc->nonblocking && bdi_write_congested(bdi)) {
877 wbc->encountered_congestion = 1;
878 return 0;
881 pagevec_init(&pvec, 0);
882 if (wbc->range_cyclic) {
883 index = mapping->writeback_index; /* Start from prev offset */
884 end = -1;
885 } else {
886 index = wbc->range_start >> PAGE_CACHE_SHIFT;
887 end = wbc->range_end >> PAGE_CACHE_SHIFT;
888 if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
889 range_whole = 1;
890 scanned = 1;
892 retry:
893 while (!done && (index <= end) &&
894 (nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
895 PAGECACHE_TAG_DIRTY,
896 min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1))) {
897 unsigned i;
899 scanned = 1;
900 for (i = 0; i < nr_pages; i++) {
901 struct page *page = pvec.pages[i];
904 * At this point we hold neither mapping->tree_lock nor
905 * lock on the page itself: the page may be truncated or
906 * invalidated (changing page->mapping to NULL), or even
907 * swizzled back from swapper_space to tmpfs file
908 * mapping
910 lock_page(page);
912 if (unlikely(page->mapping != mapping)) {
913 unlock_page(page);
914 continue;
917 if (!wbc->range_cyclic && page->index > end) {
918 done = 1;
919 unlock_page(page);
920 continue;
923 if (wbc->sync_mode != WB_SYNC_NONE)
924 wait_on_page_writeback(page);
926 if (PageWriteback(page) ||
927 !clear_page_dirty_for_io(page)) {
928 unlock_page(page);
929 continue;
932 ret = (*writepage)(page, wbc, data);
934 if (unlikely(ret == AOP_WRITEPAGE_ACTIVATE)) {
935 unlock_page(page);
936 ret = 0;
938 if (ret || (--(wbc->nr_to_write) <= 0))
939 done = 1;
940 if (wbc->nonblocking && bdi_write_congested(bdi)) {
941 wbc->encountered_congestion = 1;
942 done = 1;
945 pagevec_release(&pvec);
946 cond_resched();
948 if (!scanned && !done) {
950 * We hit the last page and there is more work to be done: wrap
951 * back to the start of the file
953 scanned = 1;
954 index = 0;
955 goto retry;
957 if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
958 mapping->writeback_index = index;
959 return ret;
961 EXPORT_SYMBOL(write_cache_pages);
964 * Function used by generic_writepages to call the real writepage
965 * function and set the mapping flags on error
967 static int __writepage(struct page *page, struct writeback_control *wbc,
968 void *data)
970 struct address_space *mapping = data;
971 int ret = mapping->a_ops->writepage(page, wbc);
972 mapping_set_error(mapping, ret);
973 return ret;
977 * generic_writepages - walk the list of dirty pages of the given address space and writepage() all of them.
978 * @mapping: address space structure to write
979 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
981 * This is a library function, which implements the writepages()
982 * address_space_operation.
984 int generic_writepages(struct address_space *mapping,
985 struct writeback_control *wbc)
987 /* deal with chardevs and other special file */
988 if (!mapping->a_ops->writepage)
989 return 0;
991 return write_cache_pages(mapping, wbc, __writepage, mapping);
994 EXPORT_SYMBOL(generic_writepages);
996 int do_writepages(struct address_space *mapping, struct writeback_control *wbc)
998 int ret;
1000 if (wbc->nr_to_write <= 0)
1001 return 0;
1002 wbc->for_writepages = 1;
1003 if (mapping->a_ops->writepages)
1004 ret = mapping->a_ops->writepages(mapping, wbc);
1005 else
1006 ret = generic_writepages(mapping, wbc);
1007 wbc->for_writepages = 0;
1008 return ret;
1012 * write_one_page - write out a single page and optionally wait on I/O
1013 * @page: the page to write
1014 * @wait: if true, wait on writeout
1016 * The page must be locked by the caller and will be unlocked upon return.
1018 * write_one_page() returns a negative error code if I/O failed.
1020 int write_one_page(struct page *page, int wait)
1022 struct address_space *mapping = page->mapping;
1023 int ret = 0;
1024 struct writeback_control wbc = {
1025 .sync_mode = WB_SYNC_ALL,
1026 .nr_to_write = 1,
1029 BUG_ON(!PageLocked(page));
1031 if (wait)
1032 wait_on_page_writeback(page);
1034 if (clear_page_dirty_for_io(page)) {
1035 page_cache_get(page);
1036 ret = mapping->a_ops->writepage(page, &wbc);
1037 if (ret == 0 && wait) {
1038 wait_on_page_writeback(page);
1039 if (PageError(page))
1040 ret = -EIO;
1042 page_cache_release(page);
1043 } else {
1044 unlock_page(page);
1046 return ret;
1048 EXPORT_SYMBOL(write_one_page);
1051 * For address_spaces which do not use buffers nor write back.
1053 int __set_page_dirty_no_writeback(struct page *page)
1055 if (!PageDirty(page))
1056 SetPageDirty(page);
1057 return 0;
1061 * For address_spaces which do not use buffers. Just tag the page as dirty in
1062 * its radix tree.
1064 * This is also used when a single buffer is being dirtied: we want to set the
1065 * page dirty in that case, but not all the buffers. This is a "bottom-up"
1066 * dirtying, whereas __set_page_dirty_buffers() is a "top-down" dirtying.
1068 * Most callers have locked the page, which pins the address_space in memory.
1069 * But zap_pte_range() does not lock the page, however in that case the
1070 * mapping is pinned by the vma's ->vm_file reference.
1072 * We take care to handle the case where the page was truncated from the
1073 * mapping by re-checking page_mapping() inside tree_lock.
1075 int __set_page_dirty_nobuffers(struct page *page)
1077 if (!TestSetPageDirty(page)) {
1078 struct address_space *mapping = page_mapping(page);
1079 struct address_space *mapping2;
1081 if (!mapping)
1082 return 1;
1084 write_lock_irq(&mapping->tree_lock);
1085 mapping2 = page_mapping(page);
1086 if (mapping2) { /* Race with truncate? */
1087 BUG_ON(mapping2 != mapping);
1088 WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page));
1089 if (mapping_cap_account_dirty(mapping)) {
1090 __inc_zone_page_state(page, NR_FILE_DIRTY);
1091 __inc_bdi_stat(mapping->backing_dev_info,
1092 BDI_RECLAIMABLE);
1093 task_io_account_write(PAGE_CACHE_SIZE);
1095 radix_tree_tag_set(&mapping->page_tree,
1096 page_index(page), PAGECACHE_TAG_DIRTY);
1098 write_unlock_irq(&mapping->tree_lock);
1099 if (mapping->host) {
1100 /* !PageAnon && !swapper_space */
1101 __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
1103 return 1;
1105 return 0;
1107 EXPORT_SYMBOL(__set_page_dirty_nobuffers);
1110 * When a writepage implementation decides that it doesn't want to write this
1111 * page for some reason, it should redirty the locked page via
1112 * redirty_page_for_writepage() and it should then unlock the page and return 0
1114 int redirty_page_for_writepage(struct writeback_control *wbc, struct page *page)
1116 wbc->pages_skipped++;
1117 return __set_page_dirty_nobuffers(page);
1119 EXPORT_SYMBOL(redirty_page_for_writepage);
1122 * If the mapping doesn't provide a set_page_dirty a_op, then
1123 * just fall through and assume that it wants buffer_heads.
1125 static int __set_page_dirty(struct page *page)
1127 struct address_space *mapping = page_mapping(page);
1129 if (likely(mapping)) {
1130 int (*spd)(struct page *) = mapping->a_ops->set_page_dirty;
1131 #ifdef CONFIG_BLOCK
1132 if (!spd)
1133 spd = __set_page_dirty_buffers;
1134 #endif
1135 return (*spd)(page);
1137 if (!PageDirty(page)) {
1138 if (!TestSetPageDirty(page))
1139 return 1;
1141 return 0;
1144 int set_page_dirty(struct page *page)
1146 int ret = __set_page_dirty(page);
1147 if (ret)
1148 task_dirty_inc(current);
1149 return ret;
1151 EXPORT_SYMBOL(set_page_dirty);
1154 * set_page_dirty() is racy if the caller has no reference against
1155 * page->mapping->host, and if the page is unlocked. This is because another
1156 * CPU could truncate the page off the mapping and then free the mapping.
1158 * Usually, the page _is_ locked, or the caller is a user-space process which
1159 * holds a reference on the inode by having an open file.
1161 * In other cases, the page should be locked before running set_page_dirty().
1163 int set_page_dirty_lock(struct page *page)
1165 int ret;
1167 lock_page_nosync(page);
1168 ret = set_page_dirty(page);
1169 unlock_page(page);
1170 return ret;
1172 EXPORT_SYMBOL(set_page_dirty_lock);
1175 * Clear a page's dirty flag, while caring for dirty memory accounting.
1176 * Returns true if the page was previously dirty.
1178 * This is for preparing to put the page under writeout. We leave the page
1179 * tagged as dirty in the radix tree so that a concurrent write-for-sync
1180 * can discover it via a PAGECACHE_TAG_DIRTY walk. The ->writepage
1181 * implementation will run either set_page_writeback() or set_page_dirty(),
1182 * at which stage we bring the page's dirty flag and radix-tree dirty tag
1183 * back into sync.
1185 * This incoherency between the page's dirty flag and radix-tree tag is
1186 * unfortunate, but it only exists while the page is locked.
1188 int clear_page_dirty_for_io(struct page *page)
1190 struct address_space *mapping = page_mapping(page);
1192 BUG_ON(!PageLocked(page));
1194 ClearPageReclaim(page);
1195 if (mapping && mapping_cap_account_dirty(mapping)) {
1197 * Yes, Virginia, this is indeed insane.
1199 * We use this sequence to make sure that
1200 * (a) we account for dirty stats properly
1201 * (b) we tell the low-level filesystem to
1202 * mark the whole page dirty if it was
1203 * dirty in a pagetable. Only to then
1204 * (c) clean the page again and return 1 to
1205 * cause the writeback.
1207 * This way we avoid all nasty races with the
1208 * dirty bit in multiple places and clearing
1209 * them concurrently from different threads.
1211 * Note! Normally the "set_page_dirty(page)"
1212 * has no effect on the actual dirty bit - since
1213 * that will already usually be set. But we
1214 * need the side effects, and it can help us
1215 * avoid races.
1217 * We basically use the page "master dirty bit"
1218 * as a serialization point for all the different
1219 * threads doing their things.
1221 if (page_mkclean(page))
1222 set_page_dirty(page);
1224 * We carefully synchronise fault handlers against
1225 * installing a dirty pte and marking the page dirty
1226 * at this point. We do this by having them hold the
1227 * page lock at some point after installing their
1228 * pte, but before marking the page dirty.
1229 * Pages are always locked coming in here, so we get
1230 * the desired exclusion. See mm/memory.c:do_wp_page()
1231 * for more comments.
1233 if (TestClearPageDirty(page)) {
1234 dec_zone_page_state(page, NR_FILE_DIRTY);
1235 dec_bdi_stat(mapping->backing_dev_info,
1236 BDI_RECLAIMABLE);
1237 return 1;
1239 return 0;
1241 return TestClearPageDirty(page);
1243 EXPORT_SYMBOL(clear_page_dirty_for_io);
1245 int test_clear_page_writeback(struct page *page)
1247 struct address_space *mapping = page_mapping(page);
1248 int ret;
1250 if (mapping) {
1251 struct backing_dev_info *bdi = mapping->backing_dev_info;
1252 unsigned long flags;
1254 write_lock_irqsave(&mapping->tree_lock, flags);
1255 ret = TestClearPageWriteback(page);
1256 if (ret) {
1257 radix_tree_tag_clear(&mapping->page_tree,
1258 page_index(page),
1259 PAGECACHE_TAG_WRITEBACK);
1260 if (bdi_cap_account_writeback(bdi)) {
1261 __dec_bdi_stat(bdi, BDI_WRITEBACK);
1262 __bdi_writeout_inc(bdi);
1265 write_unlock_irqrestore(&mapping->tree_lock, flags);
1266 } else {
1267 ret = TestClearPageWriteback(page);
1269 if (ret)
1270 dec_zone_page_state(page, NR_WRITEBACK);
1271 return ret;
1274 int test_set_page_writeback(struct page *page)
1276 struct address_space *mapping = page_mapping(page);
1277 int ret;
1279 if (mapping) {
1280 struct backing_dev_info *bdi = mapping->backing_dev_info;
1281 unsigned long flags;
1283 write_lock_irqsave(&mapping->tree_lock, flags);
1284 ret = TestSetPageWriteback(page);
1285 if (!ret) {
1286 radix_tree_tag_set(&mapping->page_tree,
1287 page_index(page),
1288 PAGECACHE_TAG_WRITEBACK);
1289 if (bdi_cap_account_writeback(bdi))
1290 __inc_bdi_stat(bdi, BDI_WRITEBACK);
1292 if (!PageDirty(page))
1293 radix_tree_tag_clear(&mapping->page_tree,
1294 page_index(page),
1295 PAGECACHE_TAG_DIRTY);
1296 write_unlock_irqrestore(&mapping->tree_lock, flags);
1297 } else {
1298 ret = TestSetPageWriteback(page);
1300 if (!ret)
1301 inc_zone_page_state(page, NR_WRITEBACK);
1302 return ret;
1305 EXPORT_SYMBOL(test_set_page_writeback);
1308 * Return true if any of the pages in the mapping are marked with the
1309 * passed tag.
1311 int mapping_tagged(struct address_space *mapping, int tag)
1313 int ret;
1314 rcu_read_lock();
1315 ret = radix_tree_tagged(&mapping->page_tree, tag);
1316 rcu_read_unlock();
1317 return ret;
1319 EXPORT_SYMBOL(mapping_tagged);