[PATCH] sky2: turn off PHY IRQ on shutdown
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / phy / marvell.c
blob0ad253282d0d0c8388503efcf7d7e6e9304fbb60
1 /*
2 * drivers/net/phy/marvell.c
4 * Driver for Marvell PHYs
6 * Author: Andy Fleming
8 * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
16 #include <linux/kernel.h>
17 #include <linux/sched.h>
18 #include <linux/string.h>
19 #include <linux/errno.h>
20 #include <linux/unistd.h>
21 #include <linux/slab.h>
22 #include <linux/interrupt.h>
23 #include <linux/init.h>
24 #include <linux/delay.h>
25 #include <linux/netdevice.h>
26 #include <linux/etherdevice.h>
27 #include <linux/skbuff.h>
28 #include <linux/spinlock.h>
29 #include <linux/mm.h>
30 #include <linux/module.h>
31 #include <linux/mii.h>
32 #include <linux/ethtool.h>
33 #include <linux/phy.h>
35 #include <asm/io.h>
36 #include <asm/irq.h>
37 #include <asm/uaccess.h>
39 #define MII_M1011_IEVENT 0x13
40 #define MII_M1011_IEVENT_CLEAR 0x0000
42 #define MII_M1011_IMASK 0x12
43 #define MII_M1011_IMASK_INIT 0x6400
44 #define MII_M1011_IMASK_CLEAR 0x0000
46 MODULE_DESCRIPTION("Marvell PHY driver");
47 MODULE_AUTHOR("Andy Fleming");
48 MODULE_LICENSE("GPL");
50 static int marvell_ack_interrupt(struct phy_device *phydev)
52 int err;
54 /* Clear the interrupts by reading the reg */
55 err = phy_read(phydev, MII_M1011_IEVENT);
57 if (err < 0)
58 return err;
60 return 0;
63 static int marvell_config_intr(struct phy_device *phydev)
65 int err;
67 if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
68 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
69 else
70 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
72 return err;
75 static int marvell_config_aneg(struct phy_device *phydev)
77 int err;
79 /* The Marvell PHY has an errata which requires
80 * that certain registers get written in order
81 * to restart autonegotiation */
82 err = phy_write(phydev, MII_BMCR, BMCR_RESET);
84 if (err < 0)
85 return err;
87 err = phy_write(phydev, 0x1d, 0x1f);
88 if (err < 0)
89 return err;
91 err = phy_write(phydev, 0x1e, 0x200c);
92 if (err < 0)
93 return err;
95 err = phy_write(phydev, 0x1d, 0x5);
96 if (err < 0)
97 return err;
99 err = phy_write(phydev, 0x1e, 0);
100 if (err < 0)
101 return err;
103 err = phy_write(phydev, 0x1e, 0x100);
104 if (err < 0)
105 return err;
108 err = genphy_config_aneg(phydev);
110 return err;
114 static struct phy_driver m88e1101_driver = {
115 .phy_id = 0x01410c00,
116 .phy_id_mask = 0xffffff00,
117 .name = "Marvell 88E1101",
118 .features = PHY_GBIT_FEATURES,
119 .flags = PHY_HAS_INTERRUPT,
120 .config_aneg = &marvell_config_aneg,
121 .read_status = &genphy_read_status,
122 .ack_interrupt = &marvell_ack_interrupt,
123 .config_intr = &marvell_config_intr,
124 .driver = { .owner = THIS_MODULE,},
127 static int __init marvell_init(void)
129 return phy_driver_register(&m88e1101_driver);
132 static void __exit marvell_exit(void)
134 phy_driver_unregister(&m88e1101_driver);
137 module_init(marvell_init);
138 module_exit(marvell_exit);