spi: omap2_mcspi: make use of dev_vdbg()
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / acpi / bus.c
blob5c221ab535d5b0a459516a16034f80a94a7d1bb4
1 /*
2 * acpi_bus.c - ACPI Bus Driver ($Revision: 80 $)
4 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
6 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or (at
11 * your option) any later version.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License along
19 * with this program; if not, write to the Free Software Foundation, Inc.,
20 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
22 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
25 #include <linux/module.h>
26 #include <linux/init.h>
27 #include <linux/ioport.h>
28 #include <linux/kernel.h>
29 #include <linux/list.h>
30 #include <linux/sched.h>
31 #include <linux/pm.h>
32 #include <linux/device.h>
33 #include <linux/proc_fs.h>
34 #include <linux/acpi.h>
35 #include <linux/slab.h>
36 #ifdef CONFIG_X86
37 #include <asm/mpspec.h>
38 #endif
39 #include <linux/pci.h>
40 #include <acpi/acpi_bus.h>
41 #include <acpi/acpi_drivers.h>
42 #include <linux/dmi.h>
44 #include "internal.h"
46 #define _COMPONENT ACPI_BUS_COMPONENT
47 ACPI_MODULE_NAME("bus");
49 struct acpi_device *acpi_root;
50 struct proc_dir_entry *acpi_root_dir;
51 EXPORT_SYMBOL(acpi_root_dir);
53 #define STRUCT_TO_INT(s) (*((int*)&s))
55 static int set_power_nocheck(const struct dmi_system_id *id)
57 printk(KERN_NOTICE PREFIX "%s detected - "
58 "disable power check in power transistion\n", id->ident);
59 acpi_power_nocheck = 1;
60 return 0;
62 static struct dmi_system_id __cpuinitdata power_nocheck_dmi_table[] = {
64 set_power_nocheck, "HP Pavilion 05", {
65 DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
66 DMI_MATCH(DMI_SYS_VENDOR, "HP Pavilion 05"),
67 DMI_MATCH(DMI_PRODUCT_VERSION, "2001211RE101GLEND") }, NULL},
68 {},
72 #ifdef CONFIG_X86
73 static int set_copy_dsdt(const struct dmi_system_id *id)
75 printk(KERN_NOTICE "%s detected - "
76 "force copy of DSDT to local memory\n", id->ident);
77 acpi_gbl_copy_dsdt_locally = 1;
78 return 0;
81 static struct dmi_system_id dsdt_dmi_table[] __initdata = {
83 * Insyde BIOS on some TOSHIBA machines corrupt the DSDT.
84 * https://bugzilla.kernel.org/show_bug.cgi?id=14679
87 .callback = set_copy_dsdt,
88 .ident = "TOSHIBA Satellite A505",
89 .matches = {
90 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
91 DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A505"),
95 .callback = set_copy_dsdt,
96 .ident = "TOSHIBA Satellite L505D",
97 .matches = {
98 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
99 DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L505D"),
104 #else
105 static struct dmi_system_id dsdt_dmi_table[] __initdata = {
108 #endif
110 /* --------------------------------------------------------------------------
111 Device Management
112 -------------------------------------------------------------------------- */
114 int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device)
116 acpi_status status = AE_OK;
119 if (!device)
120 return -EINVAL;
122 /* TBD: Support fixed-feature devices */
124 status = acpi_get_data(handle, acpi_bus_data_handler, (void **)device);
125 if (ACPI_FAILURE(status) || !*device) {
126 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n",
127 handle));
128 return -ENODEV;
131 return 0;
134 EXPORT_SYMBOL(acpi_bus_get_device);
136 acpi_status acpi_bus_get_status_handle(acpi_handle handle,
137 unsigned long long *sta)
139 acpi_status status;
141 status = acpi_evaluate_integer(handle, "_STA", NULL, sta);
142 if (ACPI_SUCCESS(status))
143 return AE_OK;
145 if (status == AE_NOT_FOUND) {
146 *sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
147 ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
148 return AE_OK;
150 return status;
153 int acpi_bus_get_status(struct acpi_device *device)
155 acpi_status status;
156 unsigned long long sta;
158 status = acpi_bus_get_status_handle(device->handle, &sta);
159 if (ACPI_FAILURE(status))
160 return -ENODEV;
162 STRUCT_TO_INT(device->status) = (int) sta;
164 if (device->status.functional && !device->status.present) {
165 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
166 "functional but not present;\n",
167 device->pnp.bus_id,
168 (u32) STRUCT_TO_INT(device->status)));
171 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
172 device->pnp.bus_id,
173 (u32) STRUCT_TO_INT(device->status)));
174 return 0;
176 EXPORT_SYMBOL(acpi_bus_get_status);
178 void acpi_bus_private_data_handler(acpi_handle handle,
179 void *context)
181 return;
183 EXPORT_SYMBOL(acpi_bus_private_data_handler);
185 int acpi_bus_get_private_data(acpi_handle handle, void **data)
187 acpi_status status = AE_OK;
189 if (!*data)
190 return -EINVAL;
192 status = acpi_get_data(handle, acpi_bus_private_data_handler, data);
193 if (ACPI_FAILURE(status) || !*data) {
194 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n",
195 handle));
196 return -ENODEV;
199 return 0;
201 EXPORT_SYMBOL(acpi_bus_get_private_data);
203 /* --------------------------------------------------------------------------
204 Power Management
205 -------------------------------------------------------------------------- */
207 int acpi_bus_get_power(acpi_handle handle, int *state)
209 int result = 0;
210 acpi_status status = 0;
211 struct acpi_device *device = NULL;
212 unsigned long long psc = 0;
215 result = acpi_bus_get_device(handle, &device);
216 if (result)
217 return result;
219 *state = ACPI_STATE_UNKNOWN;
221 if (!device->flags.power_manageable) {
222 /* TBD: Non-recursive algorithm for walking up hierarchy */
223 if (device->parent)
224 *state = device->parent->power.state;
225 else
226 *state = ACPI_STATE_D0;
227 } else {
229 * Get the device's power state either directly (via _PSC) or
230 * indirectly (via power resources).
232 if (device->power.flags.power_resources) {
233 result = acpi_power_get_inferred_state(device);
234 if (result)
235 return result;
236 } else if (device->power.flags.explicit_get) {
237 status = acpi_evaluate_integer(device->handle, "_PSC",
238 NULL, &psc);
239 if (ACPI_FAILURE(status))
240 return -ENODEV;
241 device->power.state = (int)psc;
244 *state = device->power.state;
247 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is D%d\n",
248 device->pnp.bus_id, device->power.state));
250 return 0;
253 EXPORT_SYMBOL(acpi_bus_get_power);
255 int acpi_bus_set_power(acpi_handle handle, int state)
257 int result = 0;
258 acpi_status status = AE_OK;
259 struct acpi_device *device = NULL;
260 char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' };
263 result = acpi_bus_get_device(handle, &device);
264 if (result)
265 return result;
267 if ((state < ACPI_STATE_D0) || (state > ACPI_STATE_D3))
268 return -EINVAL;
270 /* Make sure this is a valid target state */
272 if (!device->flags.power_manageable) {
273 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable\n",
274 kobject_name(&device->dev.kobj)));
275 return -ENODEV;
278 * Get device's current power state
280 if (!acpi_power_nocheck) {
282 * Maybe the incorrect power state is returned on the bogus
283 * bios, which is different with the real power state.
284 * For example: the bios returns D0 state and the real power
285 * state is D3. OS expects to set the device to D0 state. In
286 * such case if OS uses the power state returned by the BIOS,
287 * the device can't be transisted to the correct power state.
288 * So if the acpi_power_nocheck is set, it is unnecessary to
289 * get the power state by calling acpi_bus_get_power.
291 acpi_bus_get_power(device->handle, &device->power.state);
293 if ((state == device->power.state) && !device->flags.force_power_state) {
294 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
295 state));
296 return 0;
299 if (!device->power.states[state].flags.valid) {
300 printk(KERN_WARNING PREFIX "Device does not support D%d\n", state);
301 return -ENODEV;
303 if (device->parent && (state < device->parent->power.state)) {
304 printk(KERN_WARNING PREFIX
305 "Cannot set device to a higher-powered"
306 " state than parent\n");
307 return -ENODEV;
311 * Transition Power
312 * ----------------
313 * On transitions to a high-powered state we first apply power (via
314 * power resources) then evalute _PSx. Conversly for transitions to
315 * a lower-powered state.
317 if (state < device->power.state) {
318 if (device->power.flags.power_resources) {
319 result = acpi_power_transition(device, state);
320 if (result)
321 goto end;
323 if (device->power.states[state].flags.explicit_set) {
324 status = acpi_evaluate_object(device->handle,
325 object_name, NULL, NULL);
326 if (ACPI_FAILURE(status)) {
327 result = -ENODEV;
328 goto end;
331 } else {
332 if (device->power.states[state].flags.explicit_set) {
333 status = acpi_evaluate_object(device->handle,
334 object_name, NULL, NULL);
335 if (ACPI_FAILURE(status)) {
336 result = -ENODEV;
337 goto end;
340 if (device->power.flags.power_resources) {
341 result = acpi_power_transition(device, state);
342 if (result)
343 goto end;
347 end:
348 if (result)
349 printk(KERN_WARNING PREFIX
350 "Device [%s] failed to transition to D%d\n",
351 device->pnp.bus_id, state);
352 else {
353 device->power.state = state;
354 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
355 "Device [%s] transitioned to D%d\n",
356 device->pnp.bus_id, state));
359 return result;
362 EXPORT_SYMBOL(acpi_bus_set_power);
364 bool acpi_bus_power_manageable(acpi_handle handle)
366 struct acpi_device *device;
367 int result;
369 result = acpi_bus_get_device(handle, &device);
370 return result ? false : device->flags.power_manageable;
373 EXPORT_SYMBOL(acpi_bus_power_manageable);
375 bool acpi_bus_can_wakeup(acpi_handle handle)
377 struct acpi_device *device;
378 int result;
380 result = acpi_bus_get_device(handle, &device);
381 return result ? false : device->wakeup.flags.valid;
384 EXPORT_SYMBOL(acpi_bus_can_wakeup);
386 static void acpi_print_osc_error(acpi_handle handle,
387 struct acpi_osc_context *context, char *error)
389 struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER};
390 int i;
392 if (ACPI_FAILURE(acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer)))
393 printk(KERN_DEBUG "%s\n", error);
394 else {
395 printk(KERN_DEBUG "%s:%s\n", (char *)buffer.pointer, error);
396 kfree(buffer.pointer);
398 printk(KERN_DEBUG"_OSC request data:");
399 for (i = 0; i < context->cap.length; i += sizeof(u32))
400 printk("%x ", *((u32 *)(context->cap.pointer + i)));
401 printk("\n");
404 static acpi_status acpi_str_to_uuid(char *str, u8 *uuid)
406 int i;
407 static int opc_map_to_uuid[16] = {6, 4, 2, 0, 11, 9, 16, 14, 19, 21,
408 24, 26, 28, 30, 32, 34};
410 if (strlen(str) != 36)
411 return AE_BAD_PARAMETER;
412 for (i = 0; i < 36; i++) {
413 if (i == 8 || i == 13 || i == 18 || i == 23) {
414 if (str[i] != '-')
415 return AE_BAD_PARAMETER;
416 } else if (!isxdigit(str[i]))
417 return AE_BAD_PARAMETER;
419 for (i = 0; i < 16; i++) {
420 uuid[i] = hex_to_bin(str[opc_map_to_uuid[i]]) << 4;
421 uuid[i] |= hex_to_bin(str[opc_map_to_uuid[i] + 1]);
423 return AE_OK;
426 acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context)
428 acpi_status status;
429 struct acpi_object_list input;
430 union acpi_object in_params[4];
431 union acpi_object *out_obj;
432 u8 uuid[16];
433 u32 errors;
434 struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
436 if (!context)
437 return AE_ERROR;
438 if (ACPI_FAILURE(acpi_str_to_uuid(context->uuid_str, uuid)))
439 return AE_ERROR;
440 context->ret.length = ACPI_ALLOCATE_BUFFER;
441 context->ret.pointer = NULL;
443 /* Setting up input parameters */
444 input.count = 4;
445 input.pointer = in_params;
446 in_params[0].type = ACPI_TYPE_BUFFER;
447 in_params[0].buffer.length = 16;
448 in_params[0].buffer.pointer = uuid;
449 in_params[1].type = ACPI_TYPE_INTEGER;
450 in_params[1].integer.value = context->rev;
451 in_params[2].type = ACPI_TYPE_INTEGER;
452 in_params[2].integer.value = context->cap.length/sizeof(u32);
453 in_params[3].type = ACPI_TYPE_BUFFER;
454 in_params[3].buffer.length = context->cap.length;
455 in_params[3].buffer.pointer = context->cap.pointer;
457 status = acpi_evaluate_object(handle, "_OSC", &input, &output);
458 if (ACPI_FAILURE(status))
459 return status;
461 if (!output.length)
462 return AE_NULL_OBJECT;
464 out_obj = output.pointer;
465 if (out_obj->type != ACPI_TYPE_BUFFER
466 || out_obj->buffer.length != context->cap.length) {
467 acpi_print_osc_error(handle, context,
468 "_OSC evaluation returned wrong type");
469 status = AE_TYPE;
470 goto out_kfree;
472 /* Need to ignore the bit0 in result code */
473 errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
474 if (errors) {
475 if (errors & OSC_REQUEST_ERROR)
476 acpi_print_osc_error(handle, context,
477 "_OSC request failed");
478 if (errors & OSC_INVALID_UUID_ERROR)
479 acpi_print_osc_error(handle, context,
480 "_OSC invalid UUID");
481 if (errors & OSC_INVALID_REVISION_ERROR)
482 acpi_print_osc_error(handle, context,
483 "_OSC invalid revision");
484 if (errors & OSC_CAPABILITIES_MASK_ERROR) {
485 if (((u32 *)context->cap.pointer)[OSC_QUERY_TYPE]
486 & OSC_QUERY_ENABLE)
487 goto out_success;
488 status = AE_SUPPORT;
489 goto out_kfree;
491 status = AE_ERROR;
492 goto out_kfree;
494 out_success:
495 context->ret.length = out_obj->buffer.length;
496 context->ret.pointer = kmalloc(context->ret.length, GFP_KERNEL);
497 if (!context->ret.pointer) {
498 status = AE_NO_MEMORY;
499 goto out_kfree;
501 memcpy(context->ret.pointer, out_obj->buffer.pointer,
502 context->ret.length);
503 status = AE_OK;
505 out_kfree:
506 kfree(output.pointer);
507 if (status != AE_OK)
508 context->ret.pointer = NULL;
509 return status;
511 EXPORT_SYMBOL(acpi_run_osc);
513 static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48";
514 static void acpi_bus_osc_support(void)
516 u32 capbuf[2];
517 struct acpi_osc_context context = {
518 .uuid_str = sb_uuid_str,
519 .rev = 1,
520 .cap.length = 8,
521 .cap.pointer = capbuf,
523 acpi_handle handle;
525 capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
526 capbuf[OSC_SUPPORT_TYPE] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */
527 #if defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) ||\
528 defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE)
529 capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PAD_SUPPORT;
530 #endif
532 #if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE)
533 capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT;
534 #endif
535 if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
536 return;
537 if (ACPI_SUCCESS(acpi_run_osc(handle, &context)))
538 kfree(context.ret.pointer);
539 /* do we need to check the returned cap? Sounds no */
542 /* --------------------------------------------------------------------------
543 Event Management
544 -------------------------------------------------------------------------- */
546 #ifdef CONFIG_ACPI_PROC_EVENT
547 static DEFINE_SPINLOCK(acpi_bus_event_lock);
549 LIST_HEAD(acpi_bus_event_list);
550 DECLARE_WAIT_QUEUE_HEAD(acpi_bus_event_queue);
552 extern int event_is_open;
554 int acpi_bus_generate_proc_event4(const char *device_class, const char *bus_id, u8 type, int data)
556 struct acpi_bus_event *event;
557 unsigned long flags = 0;
559 /* drop event on the floor if no one's listening */
560 if (!event_is_open)
561 return 0;
563 event = kzalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC);
564 if (!event)
565 return -ENOMEM;
567 strcpy(event->device_class, device_class);
568 strcpy(event->bus_id, bus_id);
569 event->type = type;
570 event->data = data;
572 spin_lock_irqsave(&acpi_bus_event_lock, flags);
573 list_add_tail(&event->node, &acpi_bus_event_list);
574 spin_unlock_irqrestore(&acpi_bus_event_lock, flags);
576 wake_up_interruptible(&acpi_bus_event_queue);
578 return 0;
582 EXPORT_SYMBOL_GPL(acpi_bus_generate_proc_event4);
584 int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data)
586 if (!device)
587 return -EINVAL;
588 return acpi_bus_generate_proc_event4(device->pnp.device_class,
589 device->pnp.bus_id, type, data);
592 EXPORT_SYMBOL(acpi_bus_generate_proc_event);
594 int acpi_bus_receive_event(struct acpi_bus_event *event)
596 unsigned long flags = 0;
597 struct acpi_bus_event *entry = NULL;
599 DECLARE_WAITQUEUE(wait, current);
602 if (!event)
603 return -EINVAL;
605 if (list_empty(&acpi_bus_event_list)) {
607 set_current_state(TASK_INTERRUPTIBLE);
608 add_wait_queue(&acpi_bus_event_queue, &wait);
610 if (list_empty(&acpi_bus_event_list))
611 schedule();
613 remove_wait_queue(&acpi_bus_event_queue, &wait);
614 set_current_state(TASK_RUNNING);
616 if (signal_pending(current))
617 return -ERESTARTSYS;
620 spin_lock_irqsave(&acpi_bus_event_lock, flags);
621 if (!list_empty(&acpi_bus_event_list)) {
622 entry = list_entry(acpi_bus_event_list.next,
623 struct acpi_bus_event, node);
624 list_del(&entry->node);
626 spin_unlock_irqrestore(&acpi_bus_event_lock, flags);
628 if (!entry)
629 return -ENODEV;
631 memcpy(event, entry, sizeof(struct acpi_bus_event));
633 kfree(entry);
635 return 0;
638 #endif /* CONFIG_ACPI_PROC_EVENT */
640 /* --------------------------------------------------------------------------
641 Notification Handling
642 -------------------------------------------------------------------------- */
644 static void acpi_bus_check_device(acpi_handle handle)
646 struct acpi_device *device;
647 acpi_status status;
648 struct acpi_device_status old_status;
650 if (acpi_bus_get_device(handle, &device))
651 return;
652 if (!device)
653 return;
655 old_status = device->status;
658 * Make sure this device's parent is present before we go about
659 * messing with the device.
661 if (device->parent && !device->parent->status.present) {
662 device->status = device->parent->status;
663 return;
666 status = acpi_bus_get_status(device);
667 if (ACPI_FAILURE(status))
668 return;
670 if (STRUCT_TO_INT(old_status) == STRUCT_TO_INT(device->status))
671 return;
674 * Device Insertion/Removal
676 if ((device->status.present) && !(old_status.present)) {
677 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n"));
678 /* TBD: Handle device insertion */
679 } else if (!(device->status.present) && (old_status.present)) {
680 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device removal detected\n"));
681 /* TBD: Handle device removal */
685 static void acpi_bus_check_scope(acpi_handle handle)
687 /* Status Change? */
688 acpi_bus_check_device(handle);
691 * TBD: Enumerate child devices within this device's scope and
692 * run acpi_bus_check_device()'s on them.
696 static BLOCKING_NOTIFIER_HEAD(acpi_bus_notify_list);
697 int register_acpi_bus_notifier(struct notifier_block *nb)
699 return blocking_notifier_chain_register(&acpi_bus_notify_list, nb);
701 EXPORT_SYMBOL_GPL(register_acpi_bus_notifier);
703 void unregister_acpi_bus_notifier(struct notifier_block *nb)
705 blocking_notifier_chain_unregister(&acpi_bus_notify_list, nb);
707 EXPORT_SYMBOL_GPL(unregister_acpi_bus_notifier);
710 * acpi_bus_notify
711 * ---------------
712 * Callback for all 'system-level' device notifications (values 0x00-0x7F).
714 static void acpi_bus_notify(acpi_handle handle, u32 type, void *data)
716 struct acpi_device *device = NULL;
717 struct acpi_driver *driver;
719 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Notification %#02x to handle %p\n",
720 type, handle));
722 blocking_notifier_call_chain(&acpi_bus_notify_list,
723 type, (void *)handle);
725 switch (type) {
727 case ACPI_NOTIFY_BUS_CHECK:
728 acpi_bus_check_scope(handle);
730 * TBD: We'll need to outsource certain events to non-ACPI
731 * drivers via the device manager (device.c).
733 break;
735 case ACPI_NOTIFY_DEVICE_CHECK:
736 acpi_bus_check_device(handle);
738 * TBD: We'll need to outsource certain events to non-ACPI
739 * drivers via the device manager (device.c).
741 break;
743 case ACPI_NOTIFY_DEVICE_WAKE:
744 /* TBD */
745 break;
747 case ACPI_NOTIFY_EJECT_REQUEST:
748 /* TBD */
749 break;
751 case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
752 /* TBD: Exactly what does 'light' mean? */
753 break;
755 case ACPI_NOTIFY_FREQUENCY_MISMATCH:
756 /* TBD */
757 break;
759 case ACPI_NOTIFY_BUS_MODE_MISMATCH:
760 /* TBD */
761 break;
763 case ACPI_NOTIFY_POWER_FAULT:
764 /* TBD */
765 break;
767 default:
768 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
769 "Received unknown/unsupported notification [%08x]\n",
770 type));
771 break;
774 acpi_bus_get_device(handle, &device);
775 if (device) {
776 driver = device->driver;
777 if (driver && driver->ops.notify &&
778 (driver->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS))
779 driver->ops.notify(device, type);
783 /* --------------------------------------------------------------------------
784 Initialization/Cleanup
785 -------------------------------------------------------------------------- */
787 static int __init acpi_bus_init_irq(void)
789 acpi_status status = AE_OK;
790 union acpi_object arg = { ACPI_TYPE_INTEGER };
791 struct acpi_object_list arg_list = { 1, &arg };
792 char *message = NULL;
796 * Let the system know what interrupt model we are using by
797 * evaluating the \_PIC object, if exists.
800 switch (acpi_irq_model) {
801 case ACPI_IRQ_MODEL_PIC:
802 message = "PIC";
803 break;
804 case ACPI_IRQ_MODEL_IOAPIC:
805 message = "IOAPIC";
806 break;
807 case ACPI_IRQ_MODEL_IOSAPIC:
808 message = "IOSAPIC";
809 break;
810 case ACPI_IRQ_MODEL_PLATFORM:
811 message = "platform specific model";
812 break;
813 default:
814 printk(KERN_WARNING PREFIX "Unknown interrupt routing model\n");
815 return -ENODEV;
818 printk(KERN_INFO PREFIX "Using %s for interrupt routing\n", message);
820 arg.integer.value = acpi_irq_model;
822 status = acpi_evaluate_object(NULL, "\\_PIC", &arg_list, NULL);
823 if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
824 ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PIC"));
825 return -ENODEV;
828 return 0;
831 u8 acpi_gbl_permanent_mmap;
834 void __init acpi_early_init(void)
836 acpi_status status = AE_OK;
838 if (acpi_disabled)
839 return;
841 printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
843 /* enable workarounds, unless strict ACPI spec. compliance */
844 if (!acpi_strict)
845 acpi_gbl_enable_interpreter_slack = TRUE;
847 acpi_gbl_permanent_mmap = 1;
850 * If the machine falls into the DMI check table,
851 * DSDT will be copied to memory
853 dmi_check_system(dsdt_dmi_table);
855 status = acpi_reallocate_root_table();
856 if (ACPI_FAILURE(status)) {
857 printk(KERN_ERR PREFIX
858 "Unable to reallocate ACPI tables\n");
859 goto error0;
862 status = acpi_initialize_subsystem();
863 if (ACPI_FAILURE(status)) {
864 printk(KERN_ERR PREFIX
865 "Unable to initialize the ACPI Interpreter\n");
866 goto error0;
869 status = acpi_load_tables();
870 if (ACPI_FAILURE(status)) {
871 printk(KERN_ERR PREFIX
872 "Unable to load the System Description Tables\n");
873 goto error0;
876 #ifdef CONFIG_X86
877 if (!acpi_ioapic) {
878 /* compatible (0) means level (3) */
879 if (!(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)) {
880 acpi_sci_flags &= ~ACPI_MADT_TRIGGER_MASK;
881 acpi_sci_flags |= ACPI_MADT_TRIGGER_LEVEL;
883 /* Set PIC-mode SCI trigger type */
884 acpi_pic_sci_set_trigger(acpi_gbl_FADT.sci_interrupt,
885 (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
886 } else {
888 * now that acpi_gbl_FADT is initialized,
889 * update it with result from INT_SRC_OVR parsing
891 acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi;
893 #endif
895 status =
896 acpi_enable_subsystem(~
897 (ACPI_NO_HARDWARE_INIT |
898 ACPI_NO_ACPI_ENABLE));
899 if (ACPI_FAILURE(status)) {
900 printk(KERN_ERR PREFIX "Unable to enable ACPI\n");
901 goto error0;
904 return;
906 error0:
907 disable_acpi();
908 return;
911 static int __init acpi_bus_init(void)
913 int result = 0;
914 acpi_status status = AE_OK;
915 extern acpi_status acpi_os_initialize1(void);
917 acpi_os_initialize1();
919 status =
920 acpi_enable_subsystem(ACPI_NO_HARDWARE_INIT | ACPI_NO_ACPI_ENABLE);
921 if (ACPI_FAILURE(status)) {
922 printk(KERN_ERR PREFIX
923 "Unable to start the ACPI Interpreter\n");
924 goto error1;
928 * ACPI 2.0 requires the EC driver to be loaded and work before
929 * the EC device is found in the namespace (i.e. before acpi_initialize_objects()
930 * is called).
932 * This is accomplished by looking for the ECDT table, and getting
933 * the EC parameters out of that.
935 status = acpi_ec_ecdt_probe();
936 /* Ignore result. Not having an ECDT is not fatal. */
938 acpi_bus_osc_support();
940 status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION);
941 if (ACPI_FAILURE(status)) {
942 printk(KERN_ERR PREFIX "Unable to initialize ACPI objects\n");
943 goto error1;
946 acpi_early_processor_set_pdc();
949 * Maybe EC region is required at bus_scan/acpi_get_devices. So it
950 * is necessary to enable it as early as possible.
952 acpi_boot_ec_enable();
954 printk(KERN_INFO PREFIX "Interpreter enabled\n");
956 /* Initialize sleep structures */
957 acpi_sleep_init();
960 * Get the system interrupt model and evaluate \_PIC.
962 result = acpi_bus_init_irq();
963 if (result)
964 goto error1;
967 * Register the for all standard device notifications.
969 status =
970 acpi_install_notify_handler(ACPI_ROOT_OBJECT, ACPI_SYSTEM_NOTIFY,
971 &acpi_bus_notify, NULL);
972 if (ACPI_FAILURE(status)) {
973 printk(KERN_ERR PREFIX
974 "Unable to register for device notifications\n");
975 goto error1;
979 * Create the top ACPI proc directory
981 acpi_root_dir = proc_mkdir(ACPI_BUS_FILE_ROOT, NULL);
983 return 0;
985 /* Mimic structured exception handling */
986 error1:
987 acpi_terminate();
988 return -ENODEV;
991 struct kobject *acpi_kobj;
993 static int __init acpi_init(void)
995 int result = 0;
998 if (acpi_disabled) {
999 printk(KERN_INFO PREFIX "Interpreter disabled.\n");
1000 return -ENODEV;
1003 acpi_kobj = kobject_create_and_add("acpi", firmware_kobj);
1004 if (!acpi_kobj) {
1005 printk(KERN_WARNING "%s: kset create error\n", __func__);
1006 acpi_kobj = NULL;
1009 init_acpi_device_notify();
1010 result = acpi_bus_init();
1012 if (!result) {
1013 pci_mmcfg_late_init();
1014 if (!(pm_flags & PM_APM))
1015 pm_flags |= PM_ACPI;
1016 else {
1017 printk(KERN_INFO PREFIX
1018 "APM is already active, exiting\n");
1019 disable_acpi();
1020 result = -ENODEV;
1022 } else
1023 disable_acpi();
1025 if (acpi_disabled)
1026 return result;
1029 * If the laptop falls into the DMI check table, the power state check
1030 * will be disabled in the course of device power transistion.
1032 dmi_check_system(power_nocheck_dmi_table);
1034 acpi_scan_init();
1035 acpi_ec_init();
1036 acpi_power_init();
1037 acpi_sysfs_init();
1038 acpi_debugfs_init();
1039 acpi_sleep_proc_init();
1040 acpi_wakeup_device_init();
1041 return result;
1044 subsys_initcall(acpi_init);